Database always down after OS startup

I have my Windows 2003 Server (SP1) and Oracle database 10g release 2 installed.
On the day I installed these two, everything worked just fine.
One day after that and on, everytime I boot up my OS, the database is always in 'shutdown' phase (but the listener is up).
So I have to startup my database in open mode everytime I boot up.
The enterprise manager console tells me that "TNS Listener does not know the SID in the connect descriptor". This is strange, because I didn't change my listener.ora and tnsnames.ora since installation.
Could somebody help me with this problem?
Is this problem inherent in Oracle database 10g Release 2?
P.S.: I have been using release 1, but this never happened even months after installation under windows 2003 server.
Many thanks,
(Mario Andretti)

If I understand correctly, the Enterprise Manager is telling you the database is being shutdown. Is that correct?
If so, perhaps it's an enterpriser manager console issue, not a database issue.
What does the ControlPanel>AdministrationTools>Services show for the Oracle service?
Can you log on the database using sqlplus?
Message was edited by:
forbrich
Oh, and iIRC, by default the 10gR2 Enterprise Manager likes to work on a different port than the 10gR1 one did. Are you using the right port?

Similar Messages

Windows 7 home premium pc keeps powering down after startup.

Windows 7 home premium pc keeps powering down after startup The only thing I have noticed different is the heat sink fan RPMS rev quicker and seem to stay reved for longer periods. The COMPONENTS ARE DUST FREE. Components do not feel warm to the touch. Ventalation Is over done. The pc will no longer run long enough to do a lot of testing. I will be honest I do not know much, so lets change testing to trial and error.

JLW274, welcome to the forum.
When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

How to find out why my MBP will always try to shut down after 1 hour

Dear all,
this is a question too complicated for me to answer; I have previously tried to solve this problem in a usenet forum (comp.sys.mac.system) - but we didn't get it solved there, and I finally gave up on it. However, it still persists, and it is so annoying that I want to try another approach on it this time using the Apple Discussions Forum.
The problem is as follows: my relatively new (bought in december '09) MacBook Pro 13" (2.53 GHz Intel Core 2 Duo, 4 GB RAM) has a problem: always when I leave it untouched for one hour, something within the system would try to make the computer shut down (system halt). Please note right that this seems NOT to be a hardware-related issue (al least not simply a bad mother-board or sth. similar - there are a lot of threads about MacBooks that seem to shut down immediately, like fainting - this is not the case here). Instead, the system behaves like anytime when a user-requested shut down is invoked - for example, the running applications would check if any changes should be saved, and ask questions. The only thing is: I did not request a system shut down, and even more: I do not WANT the system to shut down. In fact, this whole problem is extremely annoying, since it constantly messes up my open documents (e.g. the TextMate workspace I usually set up, or similar things), forcing me to reestablish my workspace at least once a day. Over time, this can be very annoying for a computer that's used for work!!
During the course of my earlier discussions in the forum, we tried to find out what makes the computer go down - looking through the system log files etc. - but to no avail: we couldn't trace back the event that has caused the system to invoke the shut down procedure. However, it seems that this issue is related to the Mac operating system, and not the hardware - and this is why I ask this question here (and not in the MacBook Pro section). It may be that we simply didn't look in the right place - or not with the right tools - and I hope that there may be some people here with some new ideas how to trace the reason for this procedure. Everything I can tell now with some certainty (and I couldn't do it before in the usenet forum) is that the shutdown seems to be invoked about one hour after the system has been left untouched by a user (no key strokes, no mouse movements); I know this because I use my Mac for a wake up call now - and, since I sometimes need more than an hour for that, I can tell that this problem causes iTunes to quit one hour after the Mac has booted (which makes my wake-up music to switch off... and some of the running applications with no changes to save).
It would be very important for me to solve and remove this annoying problem, and I think that this really shouldn't happen! Needless to say, I haven't set the energy savings settings such that the system would shut down after one hour (in fact, I have set the system to always stay on when attached to a power supply); still, the problem prevails.
Does anyone of You specialists have a good clue or smart suggestion where (or probably how) else to look to find out what causes the shutdown? Thanks a lot for taking the time and considering this annoying problem!
Best,
Björn

Yes - it is a bit frightening... Had other Macs before this MacBook (Pro), and never experienced such a problem. Don't know - of course I look into the Preference settings from time to time, and maybe I have changed that setting on the other computers... it never occurred to me...
What an annoyance such a simple decision to make the auto-shutdown after one hour a default can be! Probably, Apple reconsiders :-D I'd rather prefer an auto-lock of the account (instead of an auto-log off)... but I believe it has been expressed often enough that, in this particular case, the - pardon me - Windows-solution (to offer a simple lock of the account, the Windows-L-key combination, IIRC) is much more practical... to copy that behaviour under Mac OS X, You'd have to go through lengths...
Anyway! Pondind, thank You very much!!! Solved a kind of embarassing, but huge problem of mine!
Best,
Björn

Database Down after Server Reboot

Hello
I am getting a weird problem after I reboot my server (windows 2003) where by my database (10.2) does not automatically start. To get it to start I have to go into administrative tools >> services and then manually restart the OracleASMService+ASM (it says it is already running).
Thanks in advance for any Idea's/suggestions

Right;
After rebooting the server and lauching the OEM Database Control it tells me the following:
- Database Instance = Down
- Listener = Up
- Agent Connection to Instance = Failed ORA-12505: TNS:Listener does not currently know of SID given in connect descriptor(DBD ERROR: OCIServerAttach)
In response to your troubleshooting suggestions;
1. alert.log has no new errors logged in the past week
2. As far as I can tell, yes. It says the service (and other associated oracle services) are running
3. No I can not connect to the database with sql*plus (before I restart the OracleASMService+ASM). SQL*Plus errors:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
After I restart the service I can connect without any problems.
4. N/A
I appreciate any help you can offer on this matter.
Regards
Toby

Quicksilver shuts down after startup chime

Hello,
I got an old Quicksilver 2002 (933) which won't boot : it shuts down 3 or 4 seconds after the startup chime. What's wrong ?
Thanks

Thank you for your answer, but it didn't work.
I forgot something important in my first post : the story of this Quicksilver
So yes, I just acquire this Mac, didn't work at all. It was missing a screw on the CPU card. After adding the screw, the PM booted into my Tiger DVD. I shut down the PM to close it correctly. It didn't boot anymore for this time.
I tried PRAM reset, motherboard reset. I've taken apart all I could (modem, graphic card, hard drive, ...), I've replaced the PSU, but nothing. I noticed that when I try to boot without RAM, the powermac makes one beep (no RAM installed) but don't shut down after that ! So I tried with 2 different RAM modules on every RAM slot, but it didn't work. (each RAM module is PC133 and works fine on my iMac G3 DV SE).
I think the motherboard or the CPU is screw up, but which one ? Maybe I forgot one thing to make it work ?
Cheers, Aurélien
(sorry if my English is a bit bad, but I hope it will be understandable

2008 Mac Pro 10.5.8 shuts down after hours of no use, Set to never shut down. Can be resumed pressing any key but all programs not in startup list need to be restarted and unsaved data lost .   New behavior. No system changes.

2008 Mac Pro 10.5.8 shuts down after hours of no use, Set to never shut down. Can be resumed pressing any key but all programs not in startup list need to be restarted and unsaved data lost .   New behavior. No system changes.

2008 Mac Pro 10.5.8 shuts down after hours of no use, Set to never shut down. Can be resumed pressing any key but all programs not in startup list need to be restarted and unsaved data lost .   New behavior. No system changes.

My phone is always charged and always on but when i make or recieve a call it shuts down after 2 mins and just shows the apple icon and after another 2 mins will restart, any ideas what is wrong?

My phone is always charged and always on but when i make or recieve a call it shuts down after 2 mins and just shows the apple icon and after another 2 mins will restart, any ideas what is wrong?

You may have to restore your phone to correct the problem.

My computer shuts down after about two minutes of use or at startup. What is the problem?

My computer shuts down after about two minutes of use or at startup. What is the problem?
Yesterday I used it for about ten minutes.
Yesterday was the first time using it after about 5 days.

Could you tell me how to check my system log, and how to tell if it is the disk cache? I am pretty sure it is not the GPU as I was having the problem using a Quadro 4000 as well.
Thanks!

TS4185 My Face Time always shuts down after using it for about a minute. Can anybody suggest a way to stop this happening?

Hi. My Face Time continuisely shuts itself down after about a minute of use. Can anyone suggest what might be causing this and how I can sort it out. This only happens on my MacBook Pro and not on any of my other devices.

Creating a new profile and deleting the old one seemed to fix the problem. Why the problem occurred in the first place, is beyond me. But after creating the new profile, restoring all my bookmarks, and reinstalling Flashgot, everything seems to be behaving wonderfully. For anyone else having similar issues, I recommend creating the new profile. It's easy to do, as long as you save your old one, so you can copy all the necessary files to restore your preferences and bookmarks.

PeopleSoft Target status always down in OEM Grid

Hi All,
This is my first post here. So pardon me if I make any grammatical mistakes.
I installed OEM Grid 10.2.0.4 in my machine and also installed the PeopleSoft Management Plugin in my OMS and Agent. Now after configuring the PeopleSoft targets (only Application server), I am able to bounce my application server via grid, but the staus of my Applcaition server in Grid is always down. but my application server is up and running fine.
Has anyone faced similar issue like this before?
Any inputs will be Highly appreciated.
Thanks in Advance.
Regards,
1_PSDBA

Hi,
Please find below for the log from emagent.trc
2008-09-22 03:08:26,066 Thread-1172 ERROR fetchlets.healthCheck: GIM-00105: file not found
2008-09-22 03:08:26,066 Thread-1172 ERROR engine: [oracle_database,PSDEV,health_check] : nmeegd_GetMetricData failed : Insta
nce Health Check initialization failed due to one of the following causes: the owner of the EM agent process is not same as th
e owner of the Oracle instance processes; the owner of the EM agent process is not part of the dba group; or the database vers
ion is not 10g (10.1.0.2) and above.
2008-09-22 03:08:26,067 Thread-1172 WARN collector: <nmecmc.c> Error exit. Error message: Instance Health Check initializatio
n failed due to one of the following causes: the owner of the EM agent process is not same as the owner of the Oracle instance
processes; the owner of the EM agent process is not part of the dba group; or the database version is not 10g (10.1.0.2) and
above.
2008-09-22 03:08:41,143 Thread-1175 ERROR fetchlets.healthCheck: GIM-00105: file not found
2008-09-22 03:08:41,144 Thread-1175 ERROR engine: [oracle_database,PSDEV,health_check] : nmeegd_GetMetricData failed : Insta
nce Health Check initialization failed due to one of the following causes: the owner of the EM agent process is not same as th
e owner of the Oracle instance processes; the owner of the EM agent process is not part of the dba group; or the database vers
ion is not 10g (10.1.0.2) and above.
2008-09-22 03:08:41,144 Thread-1175 WARN collector: <nmecmc.c> Error exit. Error message: Instance Health Check initializatio
n failed due to one of the following causes: the owner of the EM agent process is not same as the owner of the Oracle instance
processes; the owner of the EM agent process is not part of the dba group; or the database version is not 10g (10.1.0.2) and
above.
2008-09-22 03:08:52,677 Thread-5532 WARN upload: Truncating value of "COMPOSITE_KEY" from "3DA20EC2C5BC6FE3E2ADC2FC9BCD82CA"
to "3DA20EC2C5BC6FE3E2ADC2FC9BCD82CA"
2008-09-22 03:08:52,767 Thread-5532 WARN upload: Truncating value of "COMPOSITE_KEY" from "AD1B49CA54C47C5349ECA90086473EFA"
to "AD1B49CA54C47C5349ECA90086473EFA"
2008-09-22 03:08:53,022 Thread-1179 WARN upload: Truncating value of "COMPOSITE_KEY" from "83065B71422DED05AE63CFE291360A71"
to "83065B71422DED05AE63CFE291360A71"
2008-09-22 03:08:56,071 Thread-1181 ERROR fetchlets.healthCheck: GIM-00105: file not found
2008-09-22 03:08:56,071 Thread-1181 ERROR engine: [oracle_database,PSDEV,health_check] : nmeegd_GetMetricData failed : Insta
nce Health Check initialization failed due to one of the following causes: the owner of the EM agent process is not same as th
e owner of the Oracle instance processes; the owner of the EM agent process is not part of the dba group; or the database vers
ion is not 10g (10.1.0.2) and above.
Edited by: user560200 on Sep 22, 2008 2:21 AM
Edited by: user560200 on Sep 22, 2008 2:22 AM

Database is pending after restore and recovery

Database is in the pending status after restore and recovery.
The database can not startup today and it shows a error message: the log file 2 cannot be archived. Then I issue the following command:
SQL> select group#, sequence#, bytes, members, status from v$log;
    GROUP# SEQUENCE#      BYTES    MEMBERS STATUS
         1        452   52428800          1 CURRENT
         3        451   52428800          1 INACTIVE
         2        450   52428800          1 INACTIVE
SQL> ALTER DATABASE CLEAR UNARCHIVED LOGFILE GROUP 3;
Database altered.
SQL> ALTER DATABASE CLEAR UNARCHIVED LOGFILE GROUP 2;
Database altered.
SQL> alter database open;
Database altered.
SQL> shutdown immediate;
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 566231040 bytes
Fixed Size                  1220580 bytes
Variable Size             125829148 bytes
Database Buffers          432013312 bytes
Redo Buffers                7168000 bytes
Database mounted.
Database opened.But when I try to login using EM console, it shows the database is not open. Then I restore and recover the database using EM Console. But the database then get into the pending status.
What to do next?

Stop the EM console and then restart it. I expect all is OK then.

System Slow-Down After Printing

I recently installed Mountain Lion. Over the last couple of weeks I have noticed a significant operating system (10.8.2) slow down after printing with my Epson R3000 printer. This happens after every printing session. When I say slow-down I mean significant delays and dreading "beachballs" when opening applications, selecting menu items or anything else I should choose to do. I'm left with re-starting the computer to get going normally again.After re-atarting I have gone to "verify permissions" and I get approx "5" pages of permission errors, all associated with the printer library in some fashion or another. I then repair all those permissions and re-start my MacPro. The operating system then works as normal and I can use the computer with no problems (until I start printing again). I mainly use the computer for photo editing with Adobe Photoshop CS6, Adobe Lightroom 4 and Aperture 3.2.
I did not have this problem before upgrading to Mountain Lion (and then to 10.8.2). I did not get "significant" permission errors before upgrading. Since all printer drivers for this printer are handled now by Apple via the "new" Software Update process I can't even re-download the Epson printer driver and start over. I'm completely at a loss as to what, associated with the printer function, is causing these "significant" permission errors and subsequent operating system slow down. My printer is almost brand new and was working flawlessly before Mountain Lion. Let me be clear though, I can print fine. My problem is the system slow down after using the print function which I am only guessing has something to do with the "5" pages of permission errors after printting photos (with CS6/Lightroom/Aperture).
Incidently, I am not in any way a computer expert. Verifying and repairing permissions is about all I know how to do that's why I need help. I also just thought I would try the forums first before going to technical support to see what people thought about this.
Again, I repair the permission errors, re-start my system and all is fine. Any further suggestions would be deeply appreciated.

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

How to detect if Database is down when client application is running?

Hi,
I have a oracle Forms application accessing a remote database. While doing processing, application has to post some data in a remote database.
As of now, when the Forms client is running and remote database is down, the client hangs.
I have tried Creating a timer before remote database procedure call in the FORMS Trigger and checking in the when_timer_expired trigger, if a specific duration has passed or not. This doesn't work as timer fires only after the remote procedure call completes and other SQL statements in the FORMS trigger where i have created the timer completes.
I Know sqlcode -3113 can be of help.
Hope someone can help me with a solution/suggestion.
Thanks
Hari

interesting situation.
what about issuing the select count(*) into cnt from dual, if cnt>0 then do post.
better to setup the remote database has fail-over to another node.

ORA-12709: error while loading create database character set after upgrade

Dear All
i m getting ORA-12709: error while loading create database character set, After upgraded the database from 10.2.0.3 to 11.2.0.3 in ebusiness suit env.
current application version 12.0.6
please help me to resolve it.
SQL> startup;
ORACLE instance started.
Total System Global Area 1.2831E+10 bytes
Fixed Size 2171296 bytes
Variable Size 2650807904 bytes
Database Buffers 1.0133E+10 bytes
Redo Buffers 44785664 bytes
ORA-12709: error while loading create database character set
-bash-3.00$ echo $ORA_NLS10
/u01/oracle/PROD/db/teche_st/11.2.0/nls/data/9idata
export ORACLE_BASE=/u01/oracle
export ORACLE_HOME=/u01/oracle/PROD/db/tech_st/11.2.0
export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/perl/bin:$PATH
export PERL5LIB=$ORACLE_HOME/perl/lib/5.10.0:$ORACLE_HOME/perl/site_perl/5.10.0
export ORA_NLS10=/u01/oracle/PROD/db/teche_st/11.2.0/nls/data/9idata
export ORACLE_SID=PROD
-bash-3.00$ pwd
/u01/oracle/PROD/db/tech_st/11.2.0/nls/data/9idata
-bash-3.00$ ls -lh |more
total 56912
-rw-r--r-- 1 oracle oinstall 951 Jan 15 16:05 lx00001.nlb
-rw-r--r-- 1 oracle oinstall 957 Jan 15 16:05 lx00002.nlb
-rw-r--r-- 1 oracle oinstall 959 Jan 15 16:05 lx00003.nlb
-rw-r--r-- 1 oracle oinstall 984 Jan 15 16:05 lx00004.nlb
-rw-r--r-- 1 oracle oinstall 968 Jan 15 16:05 lx00005.nlb
-rw-r--r-- 1 oracle oinstall 962 Jan 15 16:05 lx00006.nlb
-rw-r--r-- 1 oracle oinstall 960 Jan 15 16:05 lx00007.nlb
-rw-r--r-- 1 oracle oinstall 950 Jan 15 16:05 lx00008.nlb
-rw-r--r-- 1 oracle oinstall 940 Jan 15 16:05 lx00009.nlb
-rw-r--r-- 1 oracle oinstall 939 Jan 15 16:05 lx0000a.nlb
-rw-r--r-- 1 oracle oinstall 1006 Jan 15 16:05 lx0000b.nlb
-rw-r--r-- 1 oracle oinstall 1008 Jan 15 16:05 lx0000c.nlb
-rw-r--r-- 1 oracle oinstall 998 Jan 15 16:05 lx0000d.nlb
-rw-r--r-- 1 oracle oinstall 1005 Jan 15 16:05 lx0000e.nlb
-rw-r--r-- 1 oracle oinstall 926 Jan 15 16:05 lx0000f.nlb
-rw-r--r-- 1 oracle oinstall 1.0K Jan 15 16:05 lx00010.nlb
-rw-r--r-- 1 oracle oinstall 958 Jan 15 16:05 lx00011.nlb
-rw-r--r-- 1 oracle oinstall 956 Jan 15 16:05 lx00012.nlb
-rw-r--r-- 1 oracle oinstall 1005 Jan 15 16:05 lx00013.nlb
-rw-r--r-- 1 oracle oinstall 970 Jan 15 16:05 lx00014.nlb
-rw-r--r-- 1 oracle oinstall 950 Jan 15 16:05 lx00015.nlb
-rw-r--r-- 1 oracle oinstall 1.0K Jan 15 16:05 lx00016.nlb
-rw-r--r-- 1 oracle oinstall 957 Jan 15 16:05 lx00017.nlb
-rw-r--r-- 1 oracle oinstall 932 Jan 15 16:05 lx00018.nlb
-rw-r--r-- 1 oracle oinstall 932 Jan 15 16:05 lx00019.nlb
-rw-r--r-- 1 oracle oinstall 951 Jan 15 16:05 lx0001a.nlb
-rw-r--r-- 1 oracle oinstall 944 Jan 15 16:05 lx0001b.nlb
-rw-r--r-- 1 oracle oinstall 953 Jan 15 16:05 lx0001c.nlb
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
ORACLE_HOME = /u01/oracle/PROD/db/tech_st/11.2.0
System name: SunOS
Node name: proddb3.zakathouse.org
Release: 5.10
Version: Generic_147440-19
Machine: sun4u
Using parameter settings in server-side spfile /u01/oracle/PROD/db/tech_st/11.2.0/dbs/spfilePROD.ora
System parameters with non-default values:
processes = 200
sessions = 400
timed_statistics = TRUE
event = ""
shared_pool_size = 416M
shared_pool_reserved_size= 40M
nls_language = "american"
nls_territory = "america"
nls_sort = "binary"
nls_date_format = "DD-MON-RR"
nls_numeric_characters = ".,"
nls_comp = "binary"
nls_length_semantics = "BYTE"
memory_target = 11G
memory_max_target = 12G
control_files = "/u01/oracle/PROD/db/apps_st/data/cntrl01.dbf"
control_files = "/u01/oracle/PROD/db/tech_st/10.2.0/dbs/cntrl02.dbf"
control_files = "/u01/oracle/PROD/db/apps_st/data/cntrl03.dbf"
db_block_checksum = "TRUE"
db_block_size = 8192
compatible = "11.2.0.0.0"
log_archive_dest_1 = "LOCATION=/u01/oracle/PROD/db/apps_st/data/archive"
log_archive_format = "%t_%s_%r.dbf"
log_buffer = 14278656
log_checkpoint_interval = 100000
log_checkpoint_timeout = 1200
db_files = 512
db_file_multiblock_read_count= 8
db_recovery_file_dest = "/u01/oracle/fast_recovery_area"
db_recovery_file_dest_size= 14726M
log_checkpoints_to_alert = TRUE
dml_locks = 10000
undo_management = "AUTO"
undo_tablespace = "APPS_UNDOTS1"
db_block_checking = "FALSE"
session_cached_cursors = 500
utl_file_dir = "/usr/tmp"
utl_file_dir = "/usr/tmp"
utl_file_dir = "/u01/oracle/PROD/db/tech_st/10.2.0/appsutil/outbound"
utl_file_dir = "/u01/oracle/PROD/db/tech_st/10.2.0/appsutil/outbound/PROD_proddb3"
utl_file_dir = "/usr/tmp"
plsql_code_type = "INTERPRETED"
plsql_optimize_level = 2
job_queue_processes = 2
cursor_sharing = "EXACT"
parallel_min_servers = 0
parallel_max_servers = 8
core_dump_dest = "/u01/oracle/PROD/db/tech_st/10.2.0/admin/PROD_proddb3/cdump"
audit_file_dest = "/u01/oracle/admin/PROD/adump"
db_name = "PROD"
open_cursors = 600
pga_aggregate_target = 1G
workarea_size_policy = "AUTO"
optimizer_secure_view_merging= FALSE
aq_tm_processes = 1
olap_page_pool_size = 4M
diagnostic_dest = "/u01/oracle"
max_dump_file_size = "20480"
Tue Jan 15 16:16:02 2013
PMON started with pid=2, OS id=18608
Tue Jan 15 16:16:02 2013
PSP0 started with pid=3, OS id=18610
Tue Jan 15 16:16:03 2013
VKTM started with pid=4, OS id=18612 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Tue Jan 15 16:16:03 2013
GEN0 started with pid=5, OS id=18616
Tue Jan 15 16:16:03 2013
DIAG started with pid=6, OS id=18618
Tue Jan 15 16:16:03 2013
DBRM started with pid=7, OS id=18620
Tue Jan 15 16:16:03 2013
DIA0 started with pid=8, OS id=18622
Tue Jan 15 16:16:03 2013
MMAN started with pid=9, OS id=18624
Tue Jan 15 16:16:03 2013
DBW0 started with pid=10, OS id=18626
Tue Jan 15 16:16:03 2013
LGWR started with pid=11, OS id=18628
Tue Jan 15 16:16:03 2013
CKPT started with pid=12, OS id=18630
Tue Jan 15 16:16:03 2013
SMON started with pid=13, OS id=18632
Tue Jan 15 16:16:04 2013
RECO started with pid=14, OS id=18634
Tue Jan 15 16:16:04 2013
MMON started with pid=15, OS id=18636
Tue Jan 15 16:16:04 2013
MMNL started with pid=16, OS id=18638
DISM started, OS id=18640
ORACLE_BASE from environment = /u01/oracle
Tue Jan 15 16:16:08 2013
ALTER DATABASE MOUNT
ORA-12709 signalled during: ALTER DATABASE MOUNT...

ORA-12709 signalled during: ALTER DATABASE MOUNT...Do you have any trace files generated at the time you get this error?
Please see these docs.
ORA-12709: WHILE STARTING THE DATABASE [ID 1076156.6]
Upgrading from 9i to 10gR2 Fails With ORA-12709 : Error While Loading Create Database Character Set [ID 732861.1]
Ora-12709 While Trying To Start The Database [ID 311035.1]
ORA-12709 when Mounting the Database [ID 160478.1]
How to Move From One Database Character Set to Another at the Database Level [ID 1059300.6]
Thanks,
Hussein

Windows 7 boot camp screen goes black after windows startup screen!!!!!!

A few days ago when I tried to start my MacBook Pro in windows 7 (enterprise) I encountered a completly black screen after the startup screen.
1) Choose start in Windows 7 from boot camp menu (holding option after starting up computer)
2) Windows start up screen would appear and finish
3) For a very brief second my cursor pointer would appear and login screen would flash onto the screen, then the screen would go black
BUT
I CAN boot windows 7 in safe mode
The computer is still on when screen goes black (fan still running and i can use keyboard commands to shut down the computer)
I've been searching the Internet for DAYS to no avail
PLEASE someone help me....... ive already tried the sfc /scannow and dskchk commands in the command prompt window

Win 7 Enterprise is not supported by Boot Camp, you may or may not get it to work reliably, (I would not bother to try)
Read this document then pick a supported version of Windows for your Mac.

Database always down after OS startup

Similar Messages

Maybe you are looking for