Sales order stock does not exist error during PGI

dear sir,
we have two plants 1010 and 1020,we are using variant configuration for our finished goods
we want to make the sales orders in 1010 plant and we manufacture the machine in 1020 plant.
so we want to dispatch machine from 1020 plant (shipping point),eventhough we make sale order in 1010 plant.
but while doing PGI ,system shows one error message "Sales order stock does not exist" message 184,area M7.
if we see in MMBE stock of finished good is available in 1020(made 412 E movement)
how to resolve this
thanks and regards
srinivas pai

There can be two reasons for these kind of error
- Your sales doc while creating this order & your item category is marked with special stock indicator as E and after this order is created you have not reserved stocks in your plant against this order. This reservation can be done in tcode MB1B movement type 412 E.
- Let say, if it is reserved then check the same in tcode MMBE stocks reserved for your sales order.
Otherwise reservation you may have done properly with correct movement types with special stock indicator E. But while creating the your sales order with item category may not have been marked with special stock indicator E. In this case even though the system has stocks reserved for that order and that order when comes for PGI system doesn't sense.
In either of the case, you have to again do the process.
Hope it can assist you.
Thanks & Regards
JP

Similar Messages

Sales order stock does not exists

Dear All:
I have created a sales order with reference to a quotation. the line item in sales order is also with reference to the quotation. and the stock has been assigned to that quotation. But while creating delivery, it is giving the error that sales order stock does not exist. my query is why sales order stock is required when the article is with reference to a quotation?? should not the stock be with reference to quotation??

Hi,
Check the Item Category of the Sales order which your using to create the delivery.In the item category confuguration VOV7 the special stock indicator 'E' may be assigned.So without a sales order stock assignement it will not allow you to create a delivery.
GO to Mb1b for the Sales order using 412 E create a stock and see whether the delivery is created or not.If it is creating than that means the sales order stock has to be generated through your process.
If production order confirms then it may generate a sales order stock in MTO scenario.If in your case it has to generated then you have to use MB1B trnasactio code or create your own customized program to create the sales order stock.
Regards,
Saju.s

Sales order stock does not exist

Hi All,
In MTS scenario also while doeing PGI against a sales order/delivery the system is giving error prompt "sales order stock does not exist"
What could be the reason? Pls suggest
rgds

hi
goto MB1b here issue the raw material against the sales order no
now do the PGI
regards
KI

COGI Error-Sales Order Stock does not exist

there are many item numbers that appearing in COGI for the "Movement Type" "261." and error text as "Sales order stock 330000172 000010 does not exist".
what might be the problem?
how can i fix this?
could anyone help plz

hi
as your scenario is MTO , when you run MRP for sale order all the componnets under finished product will get DEP req against the sale order,
so at the time of goods issue system check the stock for a component agaisnt the sale order. even the stock is vaible in unrestricted.
1.check for the component when you run MRP system might generated Purchase req(in case external procurment) or planned order(in case both procuremtn) you need to procure ord produce , so when you do GR for them stock will be against the sale order.
or
2.you can bring sale order stock by doing MB1B - using movement type 411 E.(transfering stock Unresticte stock to sale order stock)
-ashok

Sales order stock does not exist Message no. M7184

Hello Gurus,
I am getting this error while creating post goods issue.
"Sales order stock 1000000276 000010 does not exist Message no. M7184"
When i do MMBE it shows :
Finished Store 2300 Unrestricted use 2000
We are using MTO and in MRP 3 we have strategy group 20.
What i suppose to do in order to do PGI without any issue. Means SO -> Delivery ->PGI
Regards

HI
check your process that means for MTO cases Stock will be assigned to sale order line item so try to assign the stock to sale order line item
Assign stock to Sale order line item :
Go to MB1B , use movement type 411 and special stock indicator E , enter plant and Storage location and assign the stock to that Sale order and line item number
Check and Revert
Regards,
Prasanna

Problem with PGI - Sales Order stock does not exist

Hi
I created order 58161 with 1 item line (10).
Did a delivery and created a Picking Request (which i released via transaction VL08).
When i try to do PGI i get following message:
Sales order stock 58161 000010 does not exist.
I have previously done a similar order with same material and so on and it went through the system without a hitch.
I have checked the other threads, is this where i have to use MB1B and mov.type 412 E to move unrestricted goods to sales order stock?
Thx
RM

Hi,
first u check stock at tcode:MMBE for ur material ,plant and storage location.If u dont have stock than create stock through goods receipt:mb1c.[movement type 501 e,enter ur sales order no.,item no.],I think it will solve than

Factory calendor does not exist error during order creation

Hi,
I am getting the factory calendor does not exist error while creating the order. For this i will explain the details for this issue and guide me where is the problem.
we are doing reconfiguration for the new plant in the client. In this client we are now creating new plant and doing the reconfiguration. While creating the order in new plant i am getting the below error message. i have assigned the existing factory calendor of the old plant to new plant in the existing client. i am thinking that factory calendor is not plant based. In work center i have assigned the factory calendor of old plant for the new plant work center. Please guide me.
Regards,
Mastan.

Hi Dogboy,
Thank You for immediate reply.
Have you performed all PP configuration for 1007?
It means i have created order type and order type parameters, availability check,scheduling, conformation steps for the ordre type.
Master data,routing, bom creted in cewb with change number and assigned to routing in cewb.
And factory calendor assigned in work center as old plant calendor only.
Other tahn this nay steps need to consider for creation of order. anything i have missed. Please guide me.
Have you assigned a factory calendar to plant 1007?
Factory calendor is not plant specific. i think with in a client i can assign same calendor to new plant also. anywhere i have not observed the calendor as plant wise. please guide me.
Have you created a BOM for this material in 1007?
Have you created a work center in 1007? Does the work center have a factory calendar that actually exists?
The above two steps i have done.
Have you created a routing for this material in 1007, with operations in that only include work centers assigned to 1007, and assigned the routing to this material in 1007?
Yes.
Please guide me.
Regards,
Mastan.

Function Module does not exist error during query run time.

Hi,
During the execution of one of our queries we get the error "Function module RSD_(InfoObject Tech Name)_TXT_GET does not exist.
Now, this InfoObject is used in the query as a filter to restrict on certain values.
I searched in SE37 and no such function exists.
Let me know if you have any suggestions/resolutions to this issue.
Thanks,
AR.

even if the question is quite old already, maybe some other people need the answer to this, too:
In our case this error which Sudhir Anandarao describes meant, that there was no data found for given input. This is quite strange, but definitly was the source as I dont get the error if something is found by the query. The Query, InfoObject were correct, just the data asked for was wrong (like get me all ID's greater than 5, if there are only ID's smaller or equal 5 it would state "Function module RSD_(InfoObject Tech Name)_TXT_GET does not exist.")

"Action does not exist error" during country transfer action

Hello, everyone.
We are on ECC5.0 with MGE. Recently our users are getting an error - "Action does not exist on mm/dd/yyyy" when they perform a country transfer action (transfer from country A to country B). Because this is a hard error, the action is stopped and our users have to re-execute it. Surprisingly, the action works fine for the second time.
The error comes from message class PG no. 022 in the Include program MP000040.
We raised this issue to SAP but all they told us to look into our user exits. We were told to remove our exits entirely to see the error happens. The problem is that this error does not happen each time.
Has anyone experienced this error? If so, does anyone know why this is happening and how to resolve it?
We tried to debug the code step by step and came across CPREL is filled with "02" in OBJPS for infotype 0000 in the program FP50MF10. We have no idea as to how the OBJPS is filled with a value. Infotype 0000 is not supposed to have this field populated. We think this is the root cause of the error. But why does it happen?
Any help will be greatly appreciated.
Regards,
Noriko

Hi.
We use both PBAS0001 and HRBAS00_CCHANGE.
Noriko

Sales document 187000001 does not exist

Sales document 187000001 does not exist
Message no. VB001
Can you please advice why this error occurs? I am creating sales order (RE) type with reference to actual sales order, during reversal process all the docuemnt generating but still not showing document deleted Archive
1. Sales order created
2. Delivery Generated
3. PGR Done
PGI Docuemnt not showing and
4. Billing Docuemnt Generated
Regards,
Vijay Sanguri
09324905500

I am creating sales order (RE) type with reference to actual sales order
First of all, this itself is wrong. Why you were creating return order with reference to original sale order. You should always create a return order with reference to billing document.
1. Sales order created
2. Delivery Generated
3. PGR Done
PGI Docuemnt not showing and
Again, I dont know why once you have done PGI, why you have created a return delivery ??
thanks
G. Lakshmipathi

BAPI_ACC_DOCUMENT_POST - Int.Order -E/KO/104/Order 400001234 does not exist

Hi Experts,
Am using BAPI_ACC_DOCUMENT_POST to post the docs, working fine, with populating min. fields in min. structures.
But, in some cases, am populating INTERNAL ORDER into ACCOUNTGL-ORDERID field, but, am getting an error, saying
E- KO-104--Order 400001234 does not exist
But, with the same input data, the FB50 is working!!!!!!!!!!!
So, pls. let me know How to fix it?
Is there any other field I hv to populate along with ACCOUNTGL-ORDERID, when am using INTERNAL ORDER?
thanq

Srinivas,
i am expecting the error might be converion problem. Please check for conversion routine for AUFNR(Internal Order) Field, before filling it to G/L Item table (before passing to Function module)
CONVERSION_EXIT_ALPHA_INPUT
CONVERSION_EXIT_ALPHA_OUTPUT
Some time back i have similar problem. it was solved after using converion routine before filling the G/L Item internal Table. this might be helpful for you
Thanks
Sekhar.

Purchase Order 4500000 does not exist

When I am creating Service PO from shipment I am getting the error
"Purchase order 4500000001 does not exist
What can be the reason??????????
Regards.

Dear All,
At last the problem has been resolved.
There was an userexit assigned to the no.range table where the new doc.type was hardcoded to bypass the logic for allotting a PO Number and the problem was resolved.
Since the problem has been resolved I am closing the thread.
THANKS EVERYBODY FOR YOUR VALUABLE INPUTS AND SUGGESTION.
Regards.

Order (HIS1) does not exist

Hello Experts,
while changing the status of an employee, the system displayed an error saying "Order HIS1 Does Not Exist"
what is that ?!
Thanks in advance

Hi,
On which screen are you getting this error on IT 0000 or IT 0001 screen?
As per my limited knowledge, Orders, Cost Centers and WBS elements are created in Controlling.
hence I asked you to check with your FI CO consultant if an order such as HIS1 exists in the specified period.
In the meanwhile we can wait for expert comments.
cheers
Ajay

Why some times delivery will created through vl10c even sale order stock is not available?

Hi,
why some times delivery will created through vl10c in batchmode even sale order stock is not available?
Thanks,
Kalyan.

the correct english name is : Replenishment leadtime
Check with Replenishment lead time - Supply Chain Management (SCM) - SCN Wiki

ESS Salary statemenr: Form Does not exist error

Hi Experts,
As mentioned in may threads, I have changed the form name for salary statement to the custom form name in SPRO- --> HRFOR
But the portal displays "Form does not exist" error. Could not find a solution in any existing post on sdn.
Urgent help needed.
Thanks,
Shobhit

Hi,
If your payslip form is desinged in PE51, then follow these steps.
Employee Self-Service-> Service-Specific Settings-> Benefits and Payment-> Salary Statement-> Form Using HR Forms Editor (PE51)
a. Edit Feature HRFOR: Maintain the constant $CEDT$ for MOLGA 40 RCLAS +01(03).
b. Enter Payslip variant in EDTIN feature
c. Maintain smartform name in EDPDF
If your payslip form is designed in HRFORMS, then enter the form name in HRFOR feature and enter the variant in EDTIN.
Cheers!!
Ashutosh

Sales order stock does not exist error during PGI

Similar Messages

Maybe you are looking for