Database and checks

hi all ! Im need this info:
I have to make a JSP that have many checks. And an info page thats actually the same but with the info (recovered from the database) from the first one. Is there a way to tell the JSP that the check must be checked if it was filled in the first place ?
if there is a solution that its not javascript better
THanks!

Maybe I didnt make myself clear...
I have a registration page and a info page.
They are both the same page but in one you will register the info and in the other one you will see the info that you registered.
Now my question is... how do I make a check box be checked if it was checked in the first one ?
Thanks!

Similar Messages

(Cisco Historical Reporting / HRC ) All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054

Hi All,
I am getting an error message "All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054" when trying to log into HRC (This user has the reporting capabilities) . I checked the log files this is what i found out
The log file stated that there were ongoing connections of HRC with the CCX (I am sure there isn't any active login to HRC)
|| When you tried to login the following error was being displayed because the maximum number of connections were reached for the server . We can see that a total number of 5 connections have been configured . ||
1: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Current number of connections (5) from historical Clients/Scheduler to 'CRA_DATABASE' database exceeded the maximum number of possible connections (5).Check with your administrator about changing this limit on server (wfengine.properties), however this might impact server performance.
|| Below we can see all 5 connections being used up . ||
2: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:[DB Connections From Clients (count=5)]|[(#1) 'username'='uccxhrc','hostname'='3SK5FS1.ucsfmedicalcenter.org']|[(#2) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#3) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#4) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#5) 'username'='uccxhrc','hostname'='47BMMM1.ucsfmedicalcenter.org']
|| Once the maximum number of connection was reached it threw an error . ||
3: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Number of max connection to 'CRA_DATABASE' database was reached! Connection could not be established.
4: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Database connection to 'CRA_DATABASE' failed due to (All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054.)
Current exact UCCX Version 9.0.2.11001-24
Current CUCM Version 8.6.2.23900-10
Business impact Not Critical
Exact error message All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054
What is the OS version of the PC you are running and is it physical machine or virtual machine that is running the HRC client ..
OS Version Windows 7 Home Premium 64 bit and it’s a physical machine.
. The Max DB Connections for Report Client Sessions is set to 5 for each servers (There are two servers). The no of HR Sessions is set to 10.
I wanted to know if there is a way to find the HRC sessions active now and terminate the one or more or all of that sessions from the server end ?

We have had this "PRX5" problem with Exchange 2013 since the RTM version. We recently applied CU3, and it did not correct the problem. We have seen this problem on every Exchange 2013 we manage. They are all installations where all roles
are installed on the same Windows server, and in our case, they are all Windows virtual machines using Windows 2012 Hyper-V.
We have tried all the "this fixed it for me" solutions regarding DNS, network cards, host file entries and so forth. None of those "solutions" made any difference whatsoever. The occurrence of the temporary error PRX5 seems totally random.
About 2 out of 20 incoming mail test by Microsoft Connectivity Analyzer fail with this PRX5 error.
Most people don't ever notice the issue because remote mail servers retry the connection later. However, telephone voice mail systems that forward voice message files to email, or other such applications such as your scanner, often don't retry and
simply fail. Our phone system actually disables all further attempts to send voice mail to a particular user if the PRX5 error is returned when the email is sent by the phone system.
Is Microsoft totally oblivious to this problem?
PRX5 is a serious issue that needs an Exchange team resolution, or at least an acknowledgement that the problem actually does exist and has negative consequences for proper mail flow.
JSB

Procedure that checks for a value in the database and returns related info

Hi Everyone,
I need to create a stored procedure that takes customer info(any of these fname,lname,id,email etc) and looks for it in the database and displays the customer info of that particular customer(kinda search engine).
I have to use dynamic sql and sql injection.Can anyone give me a brief idea from where to start.Thankyou.

create or replace procedure pro_customer(p_customer_id number, p_customer out customer%rowtype) is
begin
select *
into p_customer
from customer
where customer_id = p_customer_id;
end pro_customer;
the names,keys and others are invented

I m using ms access as database and i want to create a login page in java

hye frnz... plz help me m new to java
m using ms access as database and try to create a login page where user type username and pw
i had enter valid user entries in database i checked connectivity is working i want as user login the main window must open after checking username and pw field to database but
now there is an error class not found exception sun:jdbc...... error
plz help me i had stuck frm 4 days */
import java.sql.DriverManager;
import java.sql.Connection;
import java.sql.Statement;
import java.sql.ResultSet;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
class Login extends JFrame
//Component Declarations
JLabel jlb1,jlb2;
     JTextField jtf1;
     JPasswordField jpf1;
     JButton jb1,jb2;
     //Constructor
     Login()
     //frame settings
          setTitle("Login Dialog");
          setLayout(new GridBagLayout());
          GridBagConstraints gbc = new GridBagConstraints();
          setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
          Dimension d= Toolkit.getDefaultToolkit().getScreenSize();
          setBounds(d.width/2-175,d.height/2-100,350,200);
          gbc.insets=new Insets(7,7,7,7);
     //adding components
          jlb1=new JLabel("User ID");
          gbc.gridx=0;
          gbc.gridy=0;
          add(jlb1,gbc);
          jlb2=new JLabel("Password");
          gbc.gridx=0;
          gbc.gridy=1;
          add(jlb2,gbc);
          jtf1=new JTextField(10);
          gbc.gridx=1;
          gbc.gridy=0;
          add(jtf1,gbc);
          jpf1=new JPasswordField(10);
          gbc.gridx=1;
          gbc.gridy=1;
          add(jpf1,gbc);
          jb1=new JButton("Login");
          gbc.gridx=0;
          gbc.gridy=2;
          add(jb1,gbc);
          jb1.addActionListener(new ActionListener()
               public void actionPerformed(ActionEvent ae)
               Connection conn=null;
                    Statement stmt=null;
                    boolean found=false;
               try
                         Class.forName("sun.jdbc.driver.JdbcOdbcDriver");
                         String dataSourceName = "Inventory";
                         String dbURL = "jdbc:odbc:" + dataSourceName;
                         conn=DriverManager.getConnection(dbURL, "","");
                         stmt=conn.createStatement();
                         ResultSet rst=stmt.executeQuery("Select * from User");
                         System.out.println(jtf1.getText()+"/t"+jpf1.getPassword());
                         while(rst.next())
                              System.out.println( rst.getString(1) +"/t"+ rst.getString(2));
          if(jtf1.getText().equals(rst.getString(1).trim()) && new String(jpf1.getPassword()).equals(rst.getString(2).trim()))
                                   found=true;
                                   rst.close();
                                   dispose();
                                   MainWindow mw= new MainWindow();     /*created min window object created to be opend after login but not working*/
                                   break;
                         rst.close();
                         stmt.close();
                         conn.close();
                    catch(ClassNotFoundException e){System.out.print(e);}
                    catch(Exception e){System.out.print(e);}
                    if(found==false) /*this portion is executing and dialog box appears invalid name and pw with class not found exception sun:jdbc.......on console */
                         JOptionPane.showMessageDialog(null,"Invalid username or password",
                              "Error Message",JOptionPane.ERROR_MESSAGE);
          jb2=new JButton("Clear");
          gbc.gridx=1;
          gbc.gridy=2;
          add(jb2,gbc);
          jb2.addActionListener(new ActionListener()
               public void actionPerformed(ActionEvent ae)
                    jtf1.setText("");
                    jpf1.setText("");
                    jtf1.requestFocus();
          setSize(350,200);
          setVisible(true);
          jtf1.requestFocus();
     public static void main(String args[])
Login l=new Login();
}

http://forums.oracle.com/forums/ann.jspa?annID=599
Oh, and by the way, your keyboard seems to be broken as your words are not getting spelled correctly.

Database and Server Report

Hi,
I want to assist my friend (he is same like me, newbie in oracle) to give a report on health of oracle database and server; which is running in his small software development and data feeding company. There are around
1. 50 users,
2. windows XP professional,
3. Oracle9i Enterprise Edition Release 9.2.0.1.0 – Production,
4. one database, No Archive Mode, oracle home is : c:\oracle\ora92 and database is stored at D:\ORACLE\oradata\orcl, 3 control files, 3 redo groups and 11 dbfs
5. 2.27 GB is free space on the drive of oracle home,
6. more than 1 GB RAM is in the system,
7. <what else more; I should describe, please let me know>
He has to submit a report on current status, health, performance etc. of oracle database and server. How should we design and get the data, please guide me.
Thanks & Regards

You Mean Helath Check Report of the DB
Tablespace size?
Datafile Size?
Default tablespace?
UNDO management?
SGA?
buffer cache hit ratio?
library cache hit ratio?
There are so many other parameters..Performance cannot be predicted from remote site
But you can provide certain information
Here are some views which could be helpful
DBA_TABLESPACE
DBA_FREE_SPACE
DBA_DATA_FILES
V$CONTROLFILE
V$LOG--Meaning less since you run in archived mode
Number of Oracle Process allocated
UNDO RETENTION
SQL>show parameter process
SQL>show parameter UNDO
Do you have METALINK acces
1019546.6
this has everything then you can pass whatever they need
and many more

How can i compare two databases and their tables

i have a text.txt file then
i will insert it into db_header and db_details
db_header has tbl_pcountheader with fld_Rack_No(char) PK and fld_DateAdded(date) PK
db_details has tbl_pcountdetails with fld_Rack_No(char) PK, fld_Barcode(char) PK and fld_Quantity(int)
then i will lookup in db_products
db_products has tbl_products and tbl_barcodes
tbl_products has fld_ItemCode
tbl_barcodes has fld_Barcode and fld_ItemCode
now i want to make a prompt contains
Rack No: Date:
Counter No:
Barcode | Item Code | Item Description | Quantity
how can i fill up this by comparing db_details and db_products?
Private Sub bt_upload_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles bt_upload.Click
If saveCheckBox.Checked = False Then
MsgBox("Please click the box to continue.")
Return
End If
If lb_file.SelectedItem Is Nothing Then
MessageBox.Show("Please select a file.")
Exit Sub
End If
' Obtain the file path from the list box selection.
Dim filePath = lb_file.SelectedItem.ToString
' Verify that the file was not removed since the Browse button was clicked.
If System.IO.File.Exists(filePath) = False Then
MessageBox.Show("File Not Found: " & filePath)
Exit Sub
End If
' Obtain file information in a string.
Dim fileInfoText As String = GetTextForOutput(filePath)
'LookUP db_header, db_details and db_products
Dim cs As String = "Database=;Data Source=localhost;" _
& "User Id=root;Password=1234"
Dim conn As New MySqlConnection(cs)
Dim ds As New DataSet
Dim da As New MySqlDataAdapter
Dim cmd As New MySqlCommand
Dim dt As New DataTable
Dim stm As String = "SELECT tbl_pcountheader.fld_Rack_No, tbl_pcountheader.fld_DateAdded, tbl_pcountdetails.fld_Barcode, tbl_products.fld_ItemCode, tbl_products.fld_ItemDesc, tbl_pcountdetails.fld_Quantity FROM db_header.tbl_pcountheader INNER JOIN db_details.tbl_pcountdetails ON db_details.tbl_pcountdetails.fld_Rack_No = db_header.tbl_pcountheader.fld_Rack_No INNER JOIN db_products.tbl_barcodes ON db_details.tbl_pcountdetails.fld_Barcode = db_products.tbl_barcodes.fld_Barcode INNER JOIN db_products.tbl_products ON db_products.tbl_barcodes.fld_ItemCode_fk = db_products.tbl_products.fld_ItemCode GROUP BY tbl_pcountheader.fld_Rack_No, tbl_pcountheader.fld_DateAdded ORDER BY tbl_pcountheader.fld_Rack_No"
ds = New DataSet
Try
conn.Open()
da = New MySqlDataAdapter(stm, conn)
da.Fill(ds, "tbl_pcountheader")
DataGridView1.DataSource = ds.Tables("tbl_pcountheader")
Dim headers = (From header As DataGridViewColumn In DataGridView1.Columns.Cast(Of DataGridViewColumn)() _
Select header.HeaderText).ToArray
Dim rows = From row As DataGridViewRow In DataGridView1.Rows.Cast(Of DataGridViewRow)() _
Where Not row.IsNewRow _
Select Array.ConvertAll(row.Cells.Cast(Of DataGridViewCell).ToArray, Function(c) If(c.Value IsNot Nothing, c.Value.ToString, ""))
Using sw As New IO.StreamWriter("c:\report.txt", append:=True)
sw.WriteLine(String.Join(",", headers))
For Each r In rows
sw.WriteLine(String.Join(",", r))
Next
End Using
ds.WriteXmlSchema("Sample.xml")
Dim cr As New CrystalReport1()
cr.SetDataSource(ds)
CrystalReportviewer1.ReportSource = cr
CrystalReportviewer1.Refresh()
Catch ex As MySqlException
MsgBox("Error: " & ex.ToString())
Finally
conn.Close()
End Try
' Show the file information.
Dim PrintPrompt As String
PrintPrompt = MsgBox(fileInfoText, MsgBoxStyle.YesNo, "ProofList")
If PrintPrompt = vbYes Then
'fileInfoText.print()
If saveCheckBox.Checked = True Then
' Place the log file in the same folder as the examined file.
Dim bakFolder As String = System.IO.Path.GetDirectoryName(filePath)
Dim bakFilePath = System.IO.Path.Combine(bakFolder, "back-up.bak")
Dim bakText As String = "Backed-Up: " & Date.Now.ToString & vbCrLf & fileInfoText & vbCrLf & vbCrLf
' Append text to the log file.
'System.IO.File.AppendAllText(bakFilePath, bakText)
My.Computer.FileSystem.WriteAllText(bakFilePath, bakText, append:=True)
'My.Computer.Network.UploadFile(bakFilePath, "C:\Documents and Settings\SAPC-TECH\My Documents\back-up file.bak", "", "", False, 1000)
'My.Computer.FileSystem.DeleteFile(bakFilePath)
'Form2.Show()
End If
'Note: This message box shows that you've uploaded a file and back up it.
MessageBox.Show("Already backed-up to ")
Else
'Me.Close()
'Application.Exit()
'End
End If
'Me.DialogResult = System.Windows.Forms.DialogResult.Cancel
'Form2.Close()
'Me.Close()
End Sub
here's my final code that solves my problem.
i just make the environment of vb into mysql console
so that i can call all the database that i wanted.

Private Sub bt_upload_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles bt_upload.Click
If saveCheckBox.Checked = False Then
MsgBox("Please click the box to continue.")
Return
End If
If lb_file.SelectedItem Is Nothing Then
MessageBox.Show("Please select a file.")
Exit Sub
End If
' Obtain the file path from the list box selection.
Dim filePath = lb_file.SelectedItem.ToString
' Verify that the file was not removed since the Browse button was clicked.
If System.IO.File.Exists(filePath) = False Then
MessageBox.Show("File Not Found: " & filePath)
Exit Sub
End If
' Obtain file information in a string.
Dim fileInfoText As String = GetTextForOutput(filePath)
'LookUP comparison db_details to db_products
'Dim connString As String = "Database=db_products;Data Source=localhost;" & "User Id=root;Password=1234"
'Dim conn As New MySqlConnection(connString)
'Dim cmd As New MySqlCommand()
'Try
' conn.Open()
' cmd.Connection = conn
' cmd.CommandText = "SELECT Database1.dbo.TableName.ColumnName, Database2TableName.Name, 'The reason why Database 2 isnt defined is the fact that it has been defined in the connection" _
' FROM Database2TableName INNER JOIN _
' Database2TableName2 INNER JOIN _
' WHERE (Database1.dbo.TableName.ColumnName = '')"
' cmd.Prepare()
' cmd.ExecuteNonQuery()
' conn.Close()
'Catch ex As Exception
'End Try
' Show the file information.
Dim PrintPrompt As String
PrintPrompt = MsgBox(fileInfoText, MsgBoxStyle.YesNo, "ProofList")
If PrintPrompt = vbYes Then
'fileInfoText.print()
If saveCheckBox.Checked = True Then
' Place the log file in the same folder as the examined file.
Dim bakFolder As String = System.IO.Path.GetDirectoryName(filePath)
Dim bakFilePath = System.IO.Path.Combine(bakFolder, "back-up.bak")
Dim bakText As String = "Backed-Up: " & Date.Now.ToString & vbCrLf & fileInfoText & vbCrLf & vbCrLf
' Append text to the log file.
'System.IO.File.AppendAllText(bakFilePath, bakText)
My.Computer.FileSystem.WriteAllText(bakFilePath, bakText, append:=True)
'My.Computer.Network.UploadFile(bakFilePath, "C:\Documents and Settings\SAPC-TECH\My Documents\back-up file.bak", "", "", False, 1000)
'My.Computer.FileSystem.DeleteFile(bakFilePath)
Form2.Show()
End If
'Note: This message box shows that you've uploaded a file and back up it.
MessageBox.Show("Already backed-up to ")
Else
Me.Close()
Application.Exit()
End
End If
Me.DialogResult = System.Windows.Forms.DialogResult.Cancel
Form2.Close()
Me.Close()
End Sub
here's my code wherein i have to compare the two database and save it into .txt file
i just have to get this items
Rack No:
Date:
Counter No:
Barcode:
Item Code:
Item Description:
Quantity:
as a prooflist to be print out.

Include or create a view in the database and use this view?

Well, I need to get related data of the main table from another related tables, so one way to do that is to use the Include method in Entity Framework to get this related data.
However, I am thinking in another option, create a view in the database and use this view in entity framework. In this way, I avoid the needed of the include, because I think that is expensive in resources. But I am no very sure about that.
I would like to know if the use of views on entity framework is a good idea to improve the performace or is better to use the include.
For example, if I use the include I have the advantage that I get only one the main record and all the related data I have in the navigation properties, so the info is more shorted.
Which is the advanteges and disadvantages of both methods to get related data in entity framework?
Thank so much.

Hello ComptonAlvaro,
>>I would like to know if the use of views on entity framework is a good idea to improve the performace or is better to use the include.
If your view would use a Join syntax to query master-child relationship tables, it actually is similar with the Include() method which actually results a duplicate records from master table, you could check this
link for detail description.
>>Which is the advanteges and disadvantages of both methods to get related data in entity framework?
One visible difference is that records from Views are not editable by default(if you want edit them, you could refer to this
blog).
In your case, my suggestion that you could use the lazying load which will load the matter table once and disable the trace if you only need to display data.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Database and page Load Issue

Well recently I needed to change the database tables and had to remove one table within the databse. Using MySQL 5
After I cleaned up all traces of information related to the table which was removed I decided to deploy and try out the application. When I try to enter one of the pages I get this error:
java.lang.RuntimeException: java.sql.SQLException: Error in allocating a connection. Cause: The connection is not valid as querying the table roles failed: Table 'database.table' doesn't exist
And here is the stack trace that came with the error:
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:384)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:297)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:247)
javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
sun.reflect.NativeMethodAccessorImpl.invoke0(NativeMethodAccessorImpl.java:-2)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
java.security.AccessController.doPrivileged(AccessController.java:-2)
javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
java.security.AccessController.doPrivileged(AccessController.java:-2)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:723)
org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:482)
org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:417)
org.apache.catalina.core.ApplicationDispatcher.access$000(ApplicationDispatcher.java:80)
org.apache.catalina.core.ApplicationDispatcher$PrivilegedForward.run(ApplicationDispatcher.java:95)
java.security.AccessController.doPrivileged(AccessController.java:-2)
org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:313)
com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:322)
com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:130)
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:311)
com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:221)
com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
sun.reflect.NativeMethodAccessorImpl.invoke0(NativeMethodAccessorImpl.java:-2)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
java.security.AccessController.doPrivileged(AccessController.java:-2)
javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
java.security.AccessController.doPrivileged(AccessController.java:-2)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
com.sun.rave.web.ui.util.UploadFilter.doFilter(UploadFilter.java:194)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:210)
org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
java.security.AccessController.doPrivileged(AccessController.java:-2)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:132)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:189)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.doProcess(ProcessorTask.java:604)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:475)
com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:371)
com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:264)
com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:281)
com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:83)
The problem is I can't find any traces of the table i removed left in the project, I did a find all in the project of a keyword which will pick up on the table and removed it.
Another interesting fact is that when I remove the data providers in the page which have no connection to the table I removed the program will load fine. I also checked all my queries and they were all displaying correctly.
Any ideas?

I found out the reason for the error, the validation table I had set was used by the datasource, after I removed the table Java Studio Creator left traces of that and still tried to use the table for validation.
If anyone else has this problem, the way I fixed this was to open the Servers Window, expand the Deployment Server Node, expand the Resources folder and remove anything there even remotely related to your database, remove your database and re-add it.
Also, could this be considered a bug? I believe I have a way to reproduce it:
1) Create a database
2) Add a datasource set the Validation table to one of the tables
3) Remove that table from the database
That should cause the error to show up. When the datasource is removed shouldn't JSC remove any traces of the connection?
Lastly does this mean that JSC is checking the validation table everytime on deployment?
A response regarding this would be appreciated

Installation problems on Fresh 11.1.0.6 database and Apex 3.1.1

I hope someone can help - at wit's end trying to get Apex up and running. I've looked through the forum over and over and don't see a resolution.
I have installed 11g Enterprise Edition on a Solaris 5.10 64bit Sparc system, created a database, setup and configured dbconsole for enterprise manager.
Database is up, enterprise manager is up and I can connect and browse just fine, but when I went to set up and configure Apex (it was version 3.0 that came with the database) I could only get a blank page trying to go to either the apex or apex_admin pages.
So re-read documentation and couldn't see what I did wrong. So I started a new Apex install, dropping the FLOWS_030000 and FLOWS_FILES users, downloaded apex 311, and did a fresh install.
For the record, I'm trying to use the Embedded PL/SQL Gateway instead of the Oracle HTTP Server.
Here are my steps:
Downloaded apex_3.1.1.zip, loaded it up on server, and unzipped the file
sqlplus "/ as sysdba"
@apexins SYSAUX SYSAUX TEMP /i/
no errors
SQL> @apxchpwd
Enter a value below for the password for the Application Express ADMIN user.
Enter a password for the ADMIN user []
Session altered.
...changing password for ADMIN
PL/SQL procedure successfully completed.
Commit complete.
SQL> !pwd
/opt/software/media11g/oracle.server.SunOS510.11106.media/apex/apex
SQL> @apxldimg.sql /opt/software/media11g/oracle.server.SunOS510.11106.media/apex
PL/SQL procedure successfully completed.
Directory created.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
Commit complete.
Timing for: Load Images
Elapsed: 00:04:14.62
Directory dropped.
SQL> @apex_epg_config /opt/software/media11g/oracle.server.SunOS510.11106.media/apex
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
Directory created.
Enter value for imgupg: <-- just hit enter
Enter value for imgupg: <-- just hit enter
PL/SQL procedure successfully completed.
Commit complete.
PL/SQL procedure successfully completed.
timing for: Load Images
Elapsed: 00:04:02.80
Session altered.
PL/SQL procedure successfully completed.
Commit complete.
Session altered.
Directory dropped.
SQL> EXEC DBMS_XDB.SETHTTPPORT(7459);
PL/SQL procedure successfully completed.
SQL> SELECT DBMS_XDB.GETHTTPPORT FROM DUAL;
GETHTTPPORT
7459
I ran the following PL/SQL cut and pasted from the install doc to enable network services:
SQL> DECLARE
ACL_PATH VARCHAR2(4000);
ACL_ID RAW(16);
BEGIN
-- Look for the ACL currently assigned to '*' and give FLOWS_030100
-- t 2 he "connect" privilege if FLOWS_030100 does not have the privilege yet.
SELECT ACL INTO ACL_PATH FROM DBA_NETWORK_ACLS
WHERE HOST = '*' AND LOWER_PORT IS NULL AND UPPER_PORT IS NULL;
-- Before checking the privilege, make sure that the ACL is valid
-- (for example, does not contain stale references to dropped users).
-- If it does, the following exception will be raised:
-- ORA- 3 4 5 6 7 8 9 10 11 12 13 44416: Invalid ACL: Unresolved principal 'FLOWS_030100'
-- ORA-06512: at "XDB.DBMS_XDBZ", line ...
SELECT SYS_OP_R2O(extractValue(P.RES, '/Resource/XMLRef')) INTO ACL_ID
FROM XDB.XDB$ACL A, PATH_VIEW P
WHERE extractValue(P.RES, '/Resource/XMLRef') = REF(A) AND
EQUALS_PATH(P.RES, ACL_PATH) = 1;
DBMS_XDBZ.ValidateACL(ACL_ID);
IF DBMS_NETWORK_ACL_ADMIN.CHECK_PRIVILEGE(ACL_PATH, 'FLOWS_030100',
'connect') IS NULL THEN
DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE(ACL_PATH,
'FLOWS_030100', TRUE, 'connect');
END IF;
EXCEP 14 15 16 17 18 19 20 21 22 23 24 25 TION
-- When no ACL has been assigned to '*'.
WHEN NO_DATA_FOUND THEN
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL('power_users.xml',
'ACL that lets power users to connect to everywhere',
'FLOWS_030100', TRUE, 'connect');
DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL('power_users.xml','*');
END; 26 27 28 29 30 31 32
33 /
PL/SQL procedure successfully completed.
SQL>
I then checked to see if the package was valid:
SQL> SELECT STATUS FROM DBA_REGISTRY
WHERE COMP_ID = 'APEX'; 2
STATUS
VALID
Still, when I go to my browser and enter the following url:
http://dbsu01a.sit.us.wamu.net:7459/apex/apex_admin
all I get is a blank page.
http://dbsu01a.sit.us.wamu.net:7459/apex
returns a "page not found" error.
It must be one of those "is your computer plugged in?" things - any help would be greatly appreciated.

Here was the fix:
My local_listener parameter in the init.ora (spfile) was not set. I ran the following as sys:
alter system set local_listener='(ADDRESS=(PROTOCOL=TCP)(HOST=<hostname>)(PORT=<port>))' scope=both;
Bounced the listener and the database and after about 3 minutes listener status showed the following new endpoint:
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=<host>)(PORT=9969)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=<host>)(PORT=7459))(Presentation=HTTP)(Session=RAW)) <-- this is the XDB entry.
After that I was able to log into APEX!

My iTunes keeps crashing. I have uninstalled and reinstalled, including recreating the entire database, and it is still doing it. I recently upgraded to 10.5. Any ideas?

My iTunes keeps crashing. I have uninstalled and reinstalled, including recreating the entire database, and it is still doing it. I recently upgraded to 10.5. Any ideas? I am running Windows 7 on a new, decent, laptop. The music is on the laptop's hard drive. There is plenty of hard drive space left.
iTunes starts fine, and I can do stuff, then within a minute or two or three it gives me an error message pop-up.

The error message says:
iTunes has stopped working.
Windows can check nline for a solution to the problem.
-> Check online for a solution and close the program
-> Close the program
Problem Event Name:          APPCRASH
Application Name:          iTunes.exe
Application Version:          10.5.0.142
Application Timestamp:          4e9243f2
Fault Module Name:          MSVCR80.dll
Fault Module Version:          8.0.50727.6195
Fault Module Timestamp:          4dcddbf3
Exception Code:          c0000005
Exception Offset:          0001500a
OS Version:          6.1.7601.2.1.0.768.3
Locale ID:          1033
Additional Information 1:          0a9e
Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
Additional Information 3:          0a9e
Additional Information 4:          0a9e372d3b4ad19135b953a78882e789
I've chosen both items, neither does anything but close the program. This problem is new with iTunes 10.5; I did not have it before.

Oracle 9I Database, and Mobile Server install history

Dear Oracle technical representative:
This TAR started out as a true request for help in solving installation problems with Oracle 9i Release 2 Enterprise Edition, and Oracle 9i Mobile Server Release 5.0.1, but it has turned into a history of frustration with out of date, laconic, and often incorrect, and misleading documentation. As a software developer, I understand that documentation is always out of date, at least mine is. Nonetheless, I must speak my mind while understanding, and sympathizing with your situation.
I struggled through the documentation, and managed to get everything working. While I was doing that, I wrote down the step by step procedure that I used to get Database, and Mobile Server running. By sharing this rough install history with you, it is my hope that it will help prevent others from experiencing the same difficulties that I have had. It has been my observation that when a user has problems installing a trial software package they give up quickly, and do not purchase a copy. It is thus extremely important that the installation instructions, and quick start guide be accurate, attentive to detail, and well written. The first impression is the one that counts.
The Oracle 9i Lite Installation, and Configuration Guide for Windows NT shipped with Oracle 9i Lite Release 5.0.1 definitely requires, and emergency rewrite. It is terribly out of date, inaccurate, and laconic. My guess is that it is a very sloppy rewrite of poorly written 8i documentation. The Oracle 9i Database Installation Guide for Windows is somewhat better. It however should do a better job informing you that before installing onto a old server the Microsoft Foundation Class (MFC), and VC runtime libraries must be up to date. The history describes the trouble with not having the MFC42.dll at version 6. Another corker is that the default port the installer presents is 2030, and not 1521, and that leads to major confusion in the both the Database, and Mobile Server installs.
Thank you for looking at the history. I hope that it will be of use to you when you update your documentation.
Thomas G. Matney
Mississippi State University
[email protected]
(662)325-2791
TAR for Oracle 9i Release 2 Database Enterprise Edition, and Oracle Lite Release 5.0.1 Mobile Server
Installation problems are highlighted in red.
Installation sequence/history:
     1. Installed Windows NT 4.0 Server SP1 on Dell Power Edge 4300 dual x86 server to wipe the slate clean.
     2. Setup TCP/IP, and IPX/SPX networks
          Computer name YGGDRASILL
          Host name = YGGDRASILL
          Domain = CFR.MSSTATE.EDU
          Internet name = YGGDRASILL.CFR.MSSATE.EDU = 130.18.130.225
     3. Installed NT SP3, and Internet Explorer 4.01 from the NT 40 Options Pack CD as the gateway to installing MTS 2.0, and IIS 4.0.
     4. Installed MTS 2.0, and IIS 4.0 from NT 4.0 Optins Pack CD.
     5. Applied NT 4.0 SP6.
     6. Installed Internet Explorer 5.5 as a prerequisite to installing MADAC 2.6.
     7. Installed MDAC 2.6
     8. Installed Paint Shop Pro 7 for capturing error screens.
     9. As previous install errors stated that the ordinal function xxxx could not be found in MFC42.dll, the latest version (6.0.8665.0) of the dll was installed, and registered from MS VC++ SP5. Also I upgraded MSVCIRT.dll, MSVCRT.dll, MSCRT40.dll, and added MSVC60.dll from SP5 to be on the safe side.
According to the installation documents all the prerequisites for installing Oracle 9i Release 2 Database Enterprise Edition are satisfied.
     10. Began install of Oracle Database Enterprise Edition with target parameters:
          Home directory = D:\Oracle\Ora92
          Database directory = D:\Oracle\oradata
          Global database name = FIA.YGGDRASILL.CFR.MSSTATE.EDU
          Port = 2030
          SID = FIA
          SYSTEM Password = phwphw
          SYS Password = phwphw
          SCOTT Password = phwphw
          DBSNMP Password = I left this one unassigned or empty.
          tnsnames.ora entry for remote TCP/IP connection
          a. CD 1 of 3 load
               1. Error writting to MFC42u.dll. Action ignore. A check indicated that MFC42u.dll version did not match the updated version of MFC42.dll. Plan is to update after install. Unicode version of MFC is probably not used by the installer.
          b. CD 1 completed with only one problem, and CD 2 load begins.
          c. CD 2 installed without incident., and CD 3 load begins, and completes without farther problems. The only issue to address at this time is to update the MFC42u.dll.
               HTTP Server URLs
                    http://7778
                    https://4443
     12. Evaluation of install success begins.
          a. Oracle HTTP Service will not start. It is of particular interest that on installs that I do not upgrade the MFC42.dll the Oracle HTTP Service will start correctly, but during the install I get the error message Ordinal nnnn not found in MFC42.dll, and the Oracle MTS Recovery Service crashes during the install. I am caught between a rock and hard spot on this one. See the Figure 1. At the end of this document. I do not need the HTTP Server at this time but I will need it later and this issue must be resolved. It appears that it hangs during startup. I am sorry but I lost the ordinal number nnnn.
          When I try to start the HTTP server from the Programs menu. It Hangs, and does not return an error message. See Figure 2, and the included Apache Setup.txt, the install log, and the HTTPd.conf . The conf, and setup files look OK to me. What is the problem?
          b. All other services start correctly.
          c. Logged into the database as SCOTT on the server with SQL Plus using the connection information:
               FIA.CFR.MSSTATE.EDU =
               (DESCRIPTION =
               (ADDRESS_LIST =
               (ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
               (CONNECT_DATA =
               (SERVER = DEDICATED)
               (SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
          I created some tables, inserted data, and queried for the data. Everthing seems to be working correctly.
          d. Logged in remotely from my AOL account on a dial-up line using Oracle 9i Release 2 Personal Edition installed on my ThinkPad. Every thing tested out as above. I used the connection information:
               FIA.CFR.MSSTATE.EDU =
               (DESCRIPTION =
               (ADDRESS_LIST =
               (ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
               (CONNECT_DATA =
               (SERVER = DEDICATED)
               (SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
     13. I concluded that except for the Oracle HTTP Server Service not starting correctly, and that after updating the MFC42u.dll to VC++ SP5 level the stage is set for installing Oracle 9i Mobile Server Release 5.0.1. I copied the MFC42u.dll to the server and registered it successfully.
     14. As Visual Studio 6.0 Professional updates all of the MFC stuff, I decides to install it at this juncture, and apply SP5.
     15. Installed JDK1.3.1 required for Oracle 9i Mobile Server Release 5.0.1
At this time the prerequisites for installing Oracle 9i Mobile Server Release 5.0.1 are satisfied, and MFC, and rt are at version 6.
It is important to note that after installing MS Visual Studio Professional 6.0 SP5, the HTTP server started working. It is clear that prior to installing Oracle Database it is essential that MFC, and possibly other components are upgraded before starting an installation of Oracle. This probably only applies to old NT servers, but it should be mentioned in the installation instructions.
     16. Attempt to install Oracle Mobile Server Release 5.0.1
          a. File locations Screen
               Name: = OraLite501
               Path: = D:\OraLite501
          b. Select Mobile Server at Installation Screen
          c. Mobile Server Repository Database Information Screen
               Hostname = YGGDRASILL = hostname from tnsnames.ora
               Port = 2030 = same as Database port
                    It is troublesome that the port in tsnames.ora is 1521, and not 2030 as was specified in the database install. I will try this port on the reinstall. On the retry, it worked. The problem was that I was mislead by the default port of 2030 at the database install. The database was actually installed on port 1521, and I was not given an error message, or warning. As I am a first time installer of Oracle products this threw me for a loop. The default port for the database needs to be 1521, if regardless of what the user specifies for a port you are going to install on port 1521.
               Net Service Name = FIA.YGGDRASILL.CFR.MSSTATE.EDU = Global database name as required by installation instructions.
          d. Yes. At Do you want to install the Mobile Server Repository question.
          e. At Oracle Protocol Support, I checked the SPX box.
          f. Summary, and Install screens function to specifications.
          g. Mobile Server Repository Wizard
               Database System password:
                    Password = phwphw
          h. Mobile Server Repository Wizard
               Schema Name: fiafield
               Password : fiafield
          i. Success at last with the install part. The problem was the wrong port number. See my above comments on this problem, and how Oracle could grease the skids for the next first time installer.
     j. I could not find the httpd.conf file in the place the install instructions said it should be for running the Mobile Server in Oracle HTTP Server. Since only one copy of httpd.conf existed, I added the include D:\OraLite501\mobile\server\bin\wtgias.conf to the bottom of the file assuming that it is the correct one. I the re-booted instead of using apache -k restart. The Oracle HTTP Server started, so there is hope. The install instructions state that the httpd.conf file would most likely be in the program files directory, when they are really installed in the Oracle Lite home directory.
     k. According to the documentation the Mobile Server should start when the Oracle HTTP Server starts with the wtgias.conf file added to the httpd.conf file. It does not. If I use Process Explorer, I know that Apache loaded the wtgias.conf, because both Apache.exe processes that are running have the wtgias.dll loaded. The facts are at this stage of the game are
          1. OraMTSRecoveryService is started
          2. OracleOraHome92HTTPService is started
          3. OracleOraHome92Listener is started on port
          4. OracleServiceFIA is started
          5. Apache.exe has the wtgias.dll loaded
          6. The Moble Server is not running and it should be if the documentation is correct.
          7. If I start the Mobile Server either as a service using wtgsvc -i or with the webtogo command from the DOS prompt, the Mobile Server starts, but when I attempt to log in with the URL http://Yggdrasill:7778/webtogo/startup it inform me the Mobile Server is not started and it is. Figure 3 shows the response I receive from the login attempt.
     l. I finally ran the Mobile Server in total debug mode using the command webtogo -d0", and it gave me the subtle hint that the correct URL is
          http://Yggdrasill.cfr.msstate.edu/webtogo/startup.
     When I use the above URL and I can login to the Mobile Server with UN = fiafield, and PW = fiafield. I was confused by the documentation. I was under the assumption that the host address would be either http://Yggdrasill:7778, or http://Yggdrasill:4443. After all when I, installed Oracle Database these URLs were listed. It needs to be made clear in the installation guide for the mobile server that the Mobile Server address is http://Your servers WWW address/webtogo/startup, and the statements about the Mobile Server will start when the Oracle HTTP Server is started needs to be removed since they are incorrect. Also, the documentation should clearly state that the Schema Name, and Password given in the Repository Wizard Screen are synonymous with the username, and password for the Mobile Server login.
     m. After determning the hard way that the Mobile Server does not start when the the Oracle HTTP Server starts, and that the correct URL is http://Internet address/webtogo/startup = http://Yggdrasill.cfr.msstate.edu/webtogo/startup, I decide to start the Mobile Server as a service with the command wtgsvc -i. After I re-booted, to my surprise, I could not login to the Mobile Server. When I checked the system services, the webtogo service was running. So to give the start as a service thing a fair chance I re-booted again, but obtained the same results. I thus concluded that the Mobile Server will not run correctly as a service. As it turns out my conclusion was wrong. After waiting a few minutes, my login try was successful. The documentation should indicate that after booting it may be a minute or two before the Mobile Server service become available.
     n. After some serious problems with the installer, and the documentation everything is working. I have a green light to go on to the next stage, which is program the handheld to take advantage of the Mobile Server. I will be glad to get back to programming, and am so thankful that I am not a network administrator.
     Appendix
HTTPd.Conf (Abstract only), Apache Setup.txt,
tsnames.ora, and listener.ora.
HTTPd.conf (Abstract only)
# Based upon the NCSA server configuration files originally by Rob McCool.
# Include the Oracle configuration file for custom settings
include "D:\oracle\ora92\Apache\Apache\conf\oracle_apache.conf"
include "D:\OraLite501\mobile\server\bin\wtgias.conf "
     tsnames.ora
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora92\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
EXTPROC_CONNECTION_DATA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
          listener.ora
# LISTENER.ORA Network Configuration File: D:\oracle\ora92\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\ora92)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
(ORACLE_HOME = D:\oracle\ora92)
(SID_NAME = FIA)
          Apache SetupInfo.txt
The following information is available in:
D:\oracle\ora92\Apache\Apache\setupinfo.txt
The HTTP Server can be accessed using the following URLs:
http://yggdrasill:7778
https://yggdrasill:4443

You can find information regarding enabling the iSQLPLUS in the following Oracle manual.
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14357/ch2.htm

Database and Listener start up 'OK' (status code 0) but can't connect?

Hi guys,
I've got an instance of EBS with database 11.1.0.7 on Oracle Linux 5.8 in a VM.
It's a new instance and been working for a few days but now I can't connect to the database.
I'm using the standard scripts that have been working so far to bring up the db (commands below) and when run both return status code 0, there is nothing unusual in their respective log files and all looks fine to me. When trying to connect from either SQL Developer or by running the EBS apps startup script [adstrtal.sh] I'm getting errors the database/listener is unreachable. Everything was working fine yesterday - I've not changed any configuration.
./addbctl.sh start
./addlnctl.sh start PROD
The only thing I can think is that last time the database was used it was crashed out due to the VirtualBox session hanging. As the scripts starting it back up again seemed to run OK I hoped that this didn't cause any long term issue? While obviously not good to be not shut down correctly this kind of issue shouldn't nuke the db should it?
Any help/light much appreciated.

I've got an instance of EBS with database 11.1.0.7 on Oracle Linux 5.8 in a VM.
It's a new instance and been working for a few days but now I can't connect to the database.
I'm using the standard scripts that have been working so far to bring up the db (commands below) and when run both return status code 0, there is nothing unusual in their respective log files and all looks fine to me. When trying to connect from either SQL Developer or by running the EBS apps startup script [adstrtal.sh] I'm getting errors the database/listener is unreachable. Everything was working fine yesterday - I've not changed any configuration.
./addbctl.sh start
./addlnctl.sh start PROD
The only thing I can think is that last time the database was used it was crashed out due to the VirtualBox session hanging. As the scripts starting it back up again seemed to run OK I hoped that this didn't cause any long term issue? While obviously not good to be not shut down correctly this kind of issue shouldn't nuke the db should it?
Any help/light much appreciated.Can you connect to the database from the server with no errors?
What is the status of the database? Check the alert.log file for details.
For the listener, please issue "lsnrctl status PROD" and post the output here.
Please also run AutoConfig and make sure it completes successfully.
Thanks,
Hussein

How to retrieve data using logical database and custom select options

Hi all,
I have a selection screen which is displayed by logical database PSJ and I have two select options of my own. I need to retrieve data based on both selection screen of logical database and my own select options. How can I do it?
Thanks in advance.

Hai Gupta
Check the following Document & Links
1. A logical database is in fact
a program only.
2. This LDB provides two main things :
a) a pre-defined selection screen
which handles all user inputs and validations
b) pre defined set of data
based upon the user selection.
3. So we dont have to worry about from
which tables to fetch data.
4. Moreover, this LDB Program,
handles all user-authorisations
and is efficient in all respects.
5. tcode is SLDB
good info about Logical Database. you can check the link.
http://www.geekinterview.com/question_details/1506
http://help.sap.com/saphelp_46c/helpdata/EN/35/2cd77bd7705394e10000009b387c12/frameset.htm
Re: How to Create and Use ldb in reports?
Re: Logical databases
http://help.sap.com/saphelp_46c/helpdata/en/9f/db9bed35c111d1829f0000e829fbfe/frameset.htm
Functions for displaying and changing logical databases:
Call Transaction SE36 or
Choose ABAP Workbench -> Development -> Programming environ. -> Logical databases
Interaction between database program and report:
During program processing, subroutines are performed in the database program and events are executed in the report.
To read data from a database tables we use logical database.
A logical database provides read-only access to a group of related tables to an ABAP/4 program.
advantages:-
The programmer need not worry about the primary key for each table.Because Logical database knows how the different tables relate to each other,and can issue the SELECT command with proper where clause to retrieve the data.
i)An easy-to-use standard user interface.
ii)check functions which check that user input is complete,correct,and plausible.
iii)meaningful data selection.
iv)central authorization checks for database accesses.
v)good read access performance while retaining the hierarchical data view determined by the application logic.
disadvantages:-
i)If you donot specify a logical database in the program attributes,the GET events never occur.
ii)There is no ENDGET command,so the code block associated with an event ends with the next event
statement (such as another GET or an END-OF-SELECTION).
1. transaction code SLDB.
2.enter name z<ldb-name>
3.create
4.short text
5.create
6. name of root node (here Ekko)
7. enter short text (f6)
8.node type -> data base table.
9.create
10 change logical DB
riht click on ekko and insert node
here node name ekpo
11.create
12. click on selections
13. press no Should the changed structure of Z<ldb name> be saved first.
14.select tables which you want to join.
15.transfer
16 now you have to o to coding part.
17. save
activate.
19.click to src code
double click on first include and activate
Regards
Sreeni

Exchange server 2013 supported mailbox databases and public folder databases

I want to know about Exchange server 2013 SP1 Standard and Enterprise version support how many Mailbox databases and Public folder Databases? Total Mailbox and Public folder databases supported information.
I Know as below but not clear:
1) Exchange server 2013 SP1 Sandard edition support 5 Databases, It's include Public folder databases, total=5 or 5 mailbox databases+5 public folder databases=10 databases
2) Exchange server 2013 SP1 Enterprise edition support 100 Databases, It's include Public folder databases, total=100 or 100 mailbox databases+100 public folder databases=200 databases
kindly let me know. Thanks.
Babu

Hi Babu,
Please check this link too.
http://blogs.technet.com/b/exchange/archive/2013/06/04/per-server-database-limits-explained.aspxhttp://blogs.technet.com/b/exchange/archive/2013/06/04/per-server-database-limits-explained.aspx
Thanks & Regards S.Nithyanandham

Document stores in both SAP database and Content Server

Hi,
We don't want to store doc. in SAP database and chose to use content server. We have KPro checked in configuration also.
Our basis team has created a content repository ZP that points to the content server, in the document area.. they enter "ARCHLINK" instead of DMS. So they told me to create doc. and pick this new ZP to store the doc. But we I created a doc. in CV01N, went to check in the original, the new repository ZP is not on the list of choice to pick from. So I cannot store the doc. in that new content repository.
Our basis team told me that if we use DMS in the document area, the doc. stores in both SAP database and Content Server. We don't want to have doc. stores in SAP database that's why we have content server.
How can I create DMS and store in content server only (not SAP database) ?
Thank you,
Sam Schwartzberg

Hi Samantha,
While check-in activity are you able to choose the new content repository i.e. ZP?
If not then use t-code OAC0 and while creating the repository check whether the certificate is activated by basis or not .
If not then you need to activate the certificate for the new repositoty in CSADMIN then only it will appear in the list while "check-in" the dcouments.
Please check for the same. Also check the t-code OACT , this new repository is shown or not.
I hope this will resolve the query.
Regards,
Ravindra

Database and checks

Similar Messages

Maybe you are looking for