Database cannot be Opened
hi
Database mounted,but not able to open
Version 10.2.0.1.0
Not in Archived mode
Thanks
Hi,
Can you tell us what is the reason you have stutdown the DB.
What are the changes you have performed prior to this, so we can check that might be the cause of ORA-00600 Issue. Most of the you need to contact ORACLE Support for these type of Issues.
I am expecting if it is with ORACLE 10g Release 2 10.2.0.2.0
then try to start manually step by step - I mean - shutdown the instance
startup mount
- there might cases with instance recovery is not happening correctly @this stage -
- perform media recovery.
that is - recover database
and open the DB - if you are still facing the check the Alert log further and Contact ORACLE Support.
- Pavan Kumar N
Oracle 9i/10g - OCP
http://oracleinternals.blogspot.com/
Similar Messages
-
Sql server will not start - Database 'model' cannot be opened. It is in the middle of a restore.
Sql server service will not start after server reboot:
2009-08-13 14:15:43.94 spid7s SQL Trace ID 1 was started by login "sa".
2009-08-13 14:15:43.97 spid7s Starting up database 'mssqlsystemresource'.
2009-08-13 14:15:43.97 spid7s The resource database build version is 10.00.1600. This is an informational message only. No user action is required.
2009-08-13 14:15:44.30 Server A self-generated certificate was successfully loaded for encryption.
2009-08-13 14:15:44.30 spid7s Server name is 'WIN-37R9WFWAJIB\MSDB1'. This is an informational message only. No user action is required.
2009-08-13 14:15:44.32 spid10s Starting up database 'model'.
2009-08-13 14:15:44.32 Server Server is listening on [ 'any' <ipv6> 49167].
2009-08-13 14:15:44.33 Server Server is listening on [ 'any' <ipv4> 49167].
2009-08-13 14:15:44.33 Server Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\MSDB1 ].
2009-08-13 14:15:44.33 Server Server named pipe provider is ready to accept connection on [ \\.\pipe\sql\query ].
2009-08-13 14:15:44.35 spid10s The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run.
2009-08-13 14:15:44.38 Server Server is listening on [ ::1 <ipv6> 49168].
2009-08-13 14:15:44.38 Server Server is listening on [ 127.0.0.1 <ipv4> 49168].
2009-08-13 14:15:44.38 Server Dedicated admin connection support was established for listening locally on port 49168.
2009-08-13 14:15:44.39 spid10s Error: 927, Severity: 14, State: 2.
2009-08-13 14:15:44.39 spid10s Database 'model' cannot be opened. It is in the middle of a restore.
2009-08-13 14:15:44.49 spid10s Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in the event log that may indicate why the tempdb files could not be initialized.
2009-08-13 14:15:44.50 spid10s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informa
there is plenty of room on the server, so i dont think its a disk space issue. i am able to start the service as such:
C:\Users\Administrator>net start MSSQL$MSDB1 /c /m /T3608
The SQL Server (MSDB1) service is starting.
The SQL Server (MSDB1) service was started successfully
sqlcmd -e
1> select name, status from sysdatabases;
2> go
select name, status from sysdatabases;
name
status
master
65544
tempdb
65544
model
65568
msdb
1073807368
SS_DBA_Dashboard
1073807368
(5 rows affected)
model is in RESTORING state and I dont know how to fix it. I am running simple backups, so I have a somewhat recent backup of model.bak but when I attempt to restore it I get an error:
1> restore database model
2> go
restore database model
Msg 3112, Level 16, State 1, Server WIN-37R9WFWAJIB\MSDB1, Line 1
Cannot restore any database other than master when the server is in single user
mode.
Msg 3013, Level 16, State 1, Server WIN-37R9WFWAJIB\MSDB1, Line 1
RESTORE DATABASE is terminating abnormally.
other forums suggest manually updating the status column but i dont know if my syntax is wrong or it just cant be done in sql server 2008:
1> begin transaction
2> update sysdatabases set status=16 where name='model'
3> ;
4> go
begin transaction
update sysdatabases set status=16 where name='model'
Msg 4406, Level 16, State 1, Server WIN-37R9WFWAJIB\MSDB1, Line 2
Update or insert of view or function 'sysdatabases' failed because it contains a
derived or constant field.
1>
yet another forum suggested taking a cleanly shut down model.mdf and model.ldf from another sql server 2008 instance and placing those in the data directory while moving the 'restoring' ones to a backup location. this didnt work either. any help is appreciated im new to sql server and this is very frustrating! thanks in advance!I have the same issue on SQL Server 2008R2, after a server reboot, but none of the NET START commands or command line attempts are successful to start the Service.
NET START command results in "Access Denied" "System Error 5" and the Command line attempts result in
Server Error: 17058, Severity: 16, State: 1.
Server initerrlog: Could not open error log file ''.
Any help?
SQL Error log file:
2011-03-29 16:50:49.40 Server (c) Microsoft Corporation.
2011-03-29 16:50:49.40 Server All rights reserved.
2011-03-29 16:50:49.40 Server Server process ID is 7292.
2011-03-29 16:50:49.40 Server System Manufacturer: 'Dell Inc.', System Model: 'PowerEdge T710'.
2011-03-29 16:50:49.40 Server Authentication mode is MIXED.
2011-03-29 16:50:49.40 Server Logging SQL Server messages in file 'E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2011-03-29 16:50:49.40 Server This instance of SQL Server last reported using a process ID of 7448 at 3/29/2011 4:30:06 PM (local) 3/29/2011 8:30:06 PM (UTC). This is an informational message only; no user action is required.
2011-03-29 16:50:49.40 Server Registry startup parameters:
-d E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\master.mdf
-e E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG
-l E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
-T 4616
2011-03-29 16:50:49.42 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2011-03-29 16:50:49.42 Server Detected 24 CPUs. This is an informational message; no user action is required.
2011-03-29 16:50:49.84 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2011-03-29 16:50:49.84 Server Lock partitioning is enabled. This is an informational message only. No user action is required.
2011-03-29 16:50:49.86 Server Node configuration: node 0: CPU mask: 0x0000000000fff000:0 Active CPU mask: 0x0000000000fff000:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2011-03-29 16:50:49.86 Server Node configuration: node 1: CPU mask: 0x0000000000000fff:0 Active CPU mask: 0x0000000000000fff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2011-03-29 16:50:49.89 spid9s Starting up database 'master'.
2011-03-29 16:50:49.95 spid9s CHECKDB for database 'master' finished without errors on 2011-03-18 08:46:34.257 (local time). This is an informational message only; no user action is required.
2011-03-29 16:50:49.95 spid9s FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
2011-03-29 16:50:49.97 spid9s SQL Trace ID 1 was started by login "sa".
2011-03-29 16:50:49.97 spid9s Starting up database 'mssqlsystemresource'.
2011-03-29 16:50:49.99 spid9s The resource database build version is 10.50.1600. This is an informational message only. No user action is required.
2011-03-29 16:50:50.20 spid13s Starting up database 'model'.
2011-03-29 16:50:50.20 spid9s Server name is 'XXXX'. This is an informational message only. No user action is required.
2011-03-29 16:50:50.21 Server The certificate [Cert Hash(sha1) "C41DC20703F049763778AC2842C3C8A3A2C6EED4"] was successfully loaded for encryption.
2011-03-29 16:50:50.21 Server Server is listening on [ 'any' <ipv6> 1433].
2011-03-29 16:50:50.21 Server Server is listening on [ 'any' <ipv4> 1433].
2011-03-29 16:50:50.21 Server Server local connection provider is ready to accept connection on [
\\.\pipe\SQLLocal\MSSQLSERVER ].
2011-03-29 16:50:50.21 Server Server named pipe provider is ready to accept connection on [
\\.\pipe\sql\query ].
2011-03-29 16:50:50.21 Server Server is listening on [ ::1 <ipv6> 1434].
2011-03-29 16:50:50.21 spid13s The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run.
2011-03-29 16:50:50.21 Server Server is listening on [ 127.0.0.1 <ipv4> 1434].
2011-03-29 16:50:50.21 spid13s Error: 927, Severity: 14, State: 2.
2011-03-29 16:50:50.21 spid13s Database 'model' cannot be opened. It is in the middle of a restore.
2011-03-29 16:50:50.21 Server Dedicated admin connection support was established for listening locally on port 1434.
2011-03-29 16:50:50.22 spid13s Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in
the event log that may indicate why the tempdb files could not be initialized.
2011-03-29 16:50:50.22 spid13s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required. -
came in this fine monday morning and it looks like developers were running some kind of trace that filled the primary DATA folder with about 80,000 5mb trace files. now that process has stopped and the logfiles have been cleaned up, but when attempting to connect to the server using the management console i get the error:
Database 'msdb' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details. (.Net SqlClient Data Provider)
when i check the status it is in recovery pending mode. i have a backup from yesterday but im not sure if this database became corrupt before that backup or not because this process was ongoing over the weekend. the last timestamp on the msdb and log files is 7am this morning..
I am not sure how to proceed recovering the msdb database with limiting interruption to the users. any advice is extremely appreciated. this is sql server 2008. i can login via sqlcmd and see it is in recovery pending status:
1> select state_desc databasestatus_sysdtabase from
2> sys.databases where name ='msdb'
3> go
select state_desc databasestatus_sysdtabase from
sys.databases where name ='msdb'
databasestatus_sysdtabase
RECOVERY_PENDING
(1 rows affected)
1>For someone experiencing a similar problem this answer is unacceptable. You're basically telling me to reboot the server to fix this. You vaguely mention using process explorer to find out who is using the file. Can you please provide
some more information on that? I have a similar problem and rebooting the server to fix it is not an option. This problem keeps reoccurring.
OS Error 32 means file has an open handle by someone else. If that is a user process then you can catch it via Process Explorer. If it's a kernel mode object then it's difficult to catch that and restart is the only choice.
http://sqlserver-help.com/2014/08/07/tips-and-tricks-os-error-32the-process-cannot-access-the-file-because-it-is-being-used-by-another-process/
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle -
I am trying to install lightroom on a new computer and am getting error message 2203.database Cannot open database file system error 2147287037. Can anyone help me with this?
This site has some info
Error 2203 | Install | Creative Suite 4, 5, or 5.5 products or updates -
Excel Services 2010 Error - "The workbook cannot be opened."
I enabled Excel Services and added a Excel Web Access viewer to my page. It's just a simple spreadsheet (which incidentally works fine on my standalone development server) that displays the error "The workbook cannot be opened." when the page loads. The trusted
file locations are set up appropriately. We are using Kerberos authentication.
My event viewer showed this "Critical" event (ID: 3760):
SQL Database 'Prod_WSS_Content' on SQL Server instance 'servername' not found. Additional error information from SQL Server is included below.
Cannot open database "Prod_WSS_Content" requested by the login. The login failed. Login failed for user 'domain\user'.
In other words, the service account that ECS was running under did not have permission to the content database. So I granted the user read permission on the database. Then I got the same error and this "Error" level event in the event viewer (ID: 5617):
There is a compatibility range mismatch between the Web server and database "Prod_WSS_Content", and connections to the data have been blocked to due to this incompatibility. This can happen when a content database has not been upgraded to be within the compatibility
range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the database must be upgraded to the same version and build level to return to compatibility range.
This error is typically associated with 2007 to 2010 upgrades apparently, but I did a fresh 2010 installation on a pristine machine. I found a very helpful post on the subject on the MSDN blogs:http://blogs.msdn.com/b/jjameson/archive/2010/05/04/the-workbook-cannot-be-opened-error-with-sharepoint-server-2010-and-tfs-2010.aspx
I gave the ECS service account db_owner permission on the content database. I'm still getting the error "The workbook cannot be opened." I ran the PowerShell commands listed at the bottom of the post, and no change.
What's interesting now, is that nothing at all is showing up in the event
viewer. I wonder if it is because of the statement in the event log that says "connections to the data have been blocked due to this incompatibility." Is there something on the SharePoint server blocking the connection to SQL Server that needs to be reset?
Rob Wilson - MCT. MCTS, MCITP SharePoint. http://sharepointblog.kellerschroeder.com http://www.therobman.com/blogHi Rob Wilson,
I suggest you to check the following things at first:
1.
What’s the version of the excel file? Excel 2003, Excel 2007 or Excel 2010? Excel Service doesn’t support Excel 2003 and easier version;
2.
Are there some features the Excel Service do not support?
More information about the Supported and Unsupported Features
http://msdn.microsoft.com/en-us/library/ff595319.aspx
3.
If the excel is connected to SQL, did you save the connect file to the Data Connection Library?
Shared your views. -
Error: 'Database handles still open at environment close'
Hello,
I have read information about this error, but I cannot solve it.
I think I have closed all objects that I use, but the error appears.
When I remove next code, the error doesn't appear:
while (xmlValue != null) {
XmlDocument theDoc = xmlValue.asDocument();
String docName = theDoc.getName();
String docString = xmlValue.asString();
String message = "Document ";
message += theDoc.getName() + ":\n";
message += xmlValue.asString();
message += "===============================\n";
System.out.println(message);
xmlValue = results.next();
theDoc.delete();
The error:
Database handles still open at environment close
Open database handle: myContainer.dbxml/secondary_document_statistics_string
Open database handle: myContainer.dbxml/secondary_document_index_string
Open database handle: myContainer.dbxml/node_nodestorage
Open database handle: myContainer.dbxml/secondary_document
Open database handle: myContainer.dbxml/secondary_dictionary
Open database handle: myContainer.dbxml/primary_dictionary
Open database handle: myContainer.dbxml/secondary_sequence
Open database handle: myContainer.dbxml/secondary_configuration
Exception in thread "main" java.lang.IllegalArgumentException: Invalid argument
at com.sleepycat.db.internal.db_javaJNI.DbEnv_close0(Native Method)
at com.sleepycat.db.internal.DbEnv.close0(DbEnv.java:217)
at com.sleepycat.db.internal.DbEnv.close(DbEnv.java:77)
at com.sleepycat.db.Environment.close(Environment.java:39)
at berkeleydbxml.Test1.main(Test1.java:137)
Java Result: 1
The code:
public static void main(String[] args) {
Environment myEnv = null;
File envHome = new File("C:/extranet/tecnologias/BerkeleyDBXML/Java/BerkeleyDBXML/dbxml");
XmlManager myManager = null;
XmlContainer myContainer = null;
XmlQueryContext context = null;
try {
EnvironmentConfig envConf = new EnvironmentConfig();
envConf.setAllowCreate(true); // If the environment does not
// exits, create it.
envConf.setInitializeCache(true); // Turn on the shared memory
// region.
envConf.setInitializeLocking(true); // Turn on the locking subsystem.
envConf.setInitializeLogging(true); // Turn on the logging subsystem.
envConf.setTransactional(true); // Turn on the transactional
// subsystem.
myEnv = new Environment(envHome, envConf);
XmlManagerConfig managerConfig = new XmlManagerConfig();
myManager = new XmlManager(myEnv, managerConfig);
XmlContainerConfig containerConf = new XmlContainerConfig();
containerConf.setTransactional(true);
containerConf.setAllowCreate(true);
String containerName = "myContainer.dbxml";
myContainer = myManager.openContainer(containerName, containerConf);
// Get a query context
context = myManager.createQueryContext();
// Declares namespaces
// Default namespace
context.setNamespace("", "urn:oasis:names:specification:ubl:schema:xsd:Invoice-2");
context.setNamespace("cac", "urn:oasis:names:specification:ubl:schema:xsd:CommonAggregateComponents-2");
context.setNamespace("cbc", "urn:oasis:names:specification:ubl:schema:xsd:CommonBasicComponents-2");
context.setNamespace("ccts", "urn:un:unece:uncefact:documentation:2");
context.setNamespace("ext", "urn:oasis:names:specification:ubl:schema:xsd:CommonExtensionComponents-2");
context.setNamespace("qdt", "urn:oasis:names:specification:ubl:schema:xsd:QualifiedDatatypes-2");
context.setNamespace("udt", "urn:un:unece:uncefact:data:specification:UnqualifiedDataTypesSchemaModule:2");
// Declare the query string
String myQuery =
"collection('myContainer.dbxml')/Invoice";
// Prepare (compile) the query
XmlQueryExpression qe = myManager.prepare(myQuery, context);
// Run the query. Note that you can perform this query many times
// without suffering the overhead of re-creating the query expression.
// Notice that the only thing we are changing is the variable value,
// which allows us to control exactly what gets returned for the
// query.
XmlResults results = qe.execute(context);
// Display the result set
XmlValue xmlValue = results.next();
while (xmlValue != null) {
XmlDocument theDoc = xmlValue.asDocument();
String docName = theDoc.getName();
String docString = xmlValue.asString();
String message = "Document ";
message += theDoc.getName() + ":\n";
message += xmlValue.asString();
message += "===============================\n";
System.out.println(message);
xmlValue = results.next();
theDoc.delete();
xmlValue.delete(); <-- the error happens here
qe.delete();
results.delete();
} catch (DatabaseException de) {
// Exception handling goes here
int i = 1;
} catch (FileNotFoundException fnfe) {
// Exception handling goes here
int i=1;
} catch (Exception e) {
// Exception handling goes here
int i = 2;
} finally {
try {
if (myContainer != null) {
myContainer.close();
if (myManager != null) {
myManager.close();
if (myEnv != null) {
myEnv.close();
} catch (DatabaseException de) {
// Exception handling goes here
If I remove the xmlValue.delete() sentence, the error appears in myEnv.close().
I use berkeley 2.3.10 version, Windows XP.
Thanks.I am having a similar problem. My method:
protected void searchQuestions(String keyword) throws LibraryException {
XmlQueryContext xqc = null;
XmlResults xr = null;
XmlQueryExpression xqe = null;
String[] qids = null;
String query = "collection()/*[contains(question, '" + keyword + "')]";
try {
conQuestions = man.openContainer(QUESTION_CONTAINER);
xqc = man.createQueryContext();
xqc.setDefaultCollection(QUESTION_CONTAINER);
xqe = man.prepare(query, xqc);
xr = xqe.execute(xqc);
conQuestions.delete();
xqc.delete();
xqe.delete();
XmlValue val = xr.next();
while (val != null) {
String name = val.asDocument().getName();
System.out.println(name);
val = xr.next();
val.delete(); <-- PROBLEM HERE
xr.delete();
} catch (XmlException xe) {
throw new LibraryException("Unable to search for questions. " + xe.getMessage());
If I leave the val.delete() line then I get a java.lang.NullPointerException but if I remove it then I get an error stating 'Database handles still open at environment close'. I run a clean up method after the previous method as follows:
protected void close() {
if(conQuizes != null)
conQuizes.delete();
if(conQuestions != null)
conQuestions.delete();
if(conUsers != null)
conUsers.delete();
if(man != null)
man.delete();
I have many other methods that interact with containers perfectly but this is the only one where I use the XmlValue class. I tried the solution that worked for brais.mendez with no luck. Any advise or ideas would be much appreciated.
Thanks,
Matt -
Upgrade to APEX 4.2.3 apexins_con.sql gets Unexpected error encountered in catconInit; exiting
I am attempting to install/upgrade apex 4.2.3 under Oracle12c in a Multi-Tenant configuration.
Here are the environmental details
Windows 7 64 bit
Apex 4.2.3
ORCL: CDB$ROOT
PDBORCL: PDB$SEED
Here is the current states of the pluggable databases
SQL> SELECT NAME,OPEN_MODE,TOTAL_SIZE/1024/1024/1024 FROM V$PDBS;
NAME OPEN_MODE TOTAL_SIZE/1024/1024/1024
PDB$SEED READ ONLY .263671875
PDBORCL READ WRITE .366210938
SQL>
This is the command that I am using to re-install/upgrade APEX:
# remove 4.2.2 installation
cd M:\apex_4.2.3\apex_4.2.3_en\apex
sqlplus /@ORCL as sysdba
@apxremov.sql << this was successful
quit
Install 4.2.3 installation
sqlplus /@ORCL as sysdba
@apexins_con.sql i10wrk SYSAUX SYSAUX TEMP /i/ << this failed
The APEX installation fails immediately with the following message:
catconInit: database is not open
Unexpected error encountered in catconInit; exiting
I cannot determine which database is not open. Both my CDB$ROOT and PDBORCL are reported as open (READ WRITE Mode).
Here is my Container database
SQL> SELECT SYS_CONTEXT ('USERENV', 'CON_NAME') FROM DUAL;
SYS_CONTEXT('USERENV','CON_NAME')
CDB$ROOT
SQL> select instance_name,status from v$instance;
INSTANCE_NAME STATUS
orcl OPEN
SQL>
Here is the associated Pluggable Database
sqlplus /@PDBORCL as sysdba
SQL> select instance_name,status from v$instance;
INSTANCE_NAME STATUS
orcl OPEN
SQL> ALTER PLUGGABLE DATABASE PDBORCL OPEN;
ALTER PLUGGABLE DATABASE PDBORCL OPEN
ERROR at line 1:
ORA-65019: pluggable database PDBORCL already open
I am confused…. Which database is not open?
The PDB$SEED is open in (READ ONLY) mode, but that is simply the template database. I don't think that ever needs to be open in (Read Write) mode.sbing52,
I cannot vouch for the specific error that is being returned by catcon.pl, but I would try the following in your situation.
1. It seems you connect to CDB$ROOT and ran apxremov.sql. This only removed the common APEX option from CDB$ROOT. Your PDB is now in an inconsistent state, since APEX is no longer in the root. I would reconnect to CDB$ROOT and run apxremov_con.sql, make sure you use the one from the 4.2.3 distribution. The one in the ORACLE home will not work.
2. I would then re-run apexins_con.sql connect to CDB$ROOT. Also, you need to pass the proper parameters. Why are you passing i10wrk? You should be invoking it like:
@apexins_con.sql SYSAUX SYSAUX TEMP /i/
Regards,
Jason -
Thumbnail pictures cannot be opened, black exclamation mark appears
Numerous photos cannot be opened any more, when I click on the little previews I see only a black surface with an exclamation mark. How can I fix this problem ?
The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
What version of iPhoto? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
"Your photo library is damaged or unreadable and cannot be opened"
"Your photo library is damaged or unreadable and cannot be opened. Please restore from a backup."
THIS IS THE MESSAGE i just got!! i was importing photos off my digital camera.
I NEVER HAVE HAD A PROBLEM BEFORE?
And i got this message..
as far as "back up" uhhhh never did that on my I photos pictures. what can i do!?!
Ann L
LasVegasUsing iPhoto 08?
Easiest solution: restore from your back up. When you say "uhhhh never did that on my I photos pictures" then you're telling us that you don't really care about them. Only a fool has any important data on a computer without a back up.
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption. -
I am getting a message that my iphoto library cannot be opened because I mades changes to my photos in a newer version of iphoto and I need to quit and use the newest version of iPhoto. but in update, it says i have no updates. i dont even remember making changes in iphoto.Help. thanks.
What version of iPhoto? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Muse file is damaged and cannot be opened...Urgent support needd...loss of 40 hrs work
I had worked on Muse file for over 40 hrs...Now I cannot open the file.
It says the file is damaged and cannot be openned.
Urgent support needed!!!!!!!!!!!!!!!!!!Jennifer, thank you for sending the two files. They've created more questions than answers.
Neither file shows any signs of the type of damage that occurs when a drive is removed without being ejected. I feel quite confident that's not the cause in this case.
Unfortunately the nature of the damage is such that to understand it I'm going to have to spend a significant amount of time developing some custom foreinsics tools. At least a few days of focused development. Unfortunately at the moment I have a few high priority deadlines looming along with an approaching vacation, so it's going to be at least a couple weeks before I'm going to make any progress on that.
Without the results of those foreinsics but from what I've seen in the file the most likely cause is one of two things:
1) Faulty hardware; or
2) A bug in Muse.
Neither of those is likely, but those are the two most likely causes I can theorize.
Faulty Hardware
From my experience on InDesign and now Muse I've come to realize hard drives fail far more frequently than most people realize. The fact that .muse (and InDesign) files are large means they cover more area on your hard drive and thus are more likely to be the first to encounter issues caused by a failing drive. The Muse file format is a database (as is InDesign's) that contains many many cross linked objects. If you save a large text file and one byte is scrambled the result is a misspelling in your text file and the word processor opens and displays the file fine. When one byte in a large image is scrambled odds are a single pixel will appear as the wrong color or transparency in your image editor. When a single byte in a database file is scrambled, it can break the interrelationship between objects and result in an unintelligible file to the application attempting to read it.
I recommend you run Disk Utility and any other hard drive verification software you might have to help rule out failing hardware.
A Bug In Muse
This is the one I'll lose sleep over until I find time to do the forensics, assuming the forensics turn up something fairly conclusive. If the cause is a bug in Muse, it's going to have to be something very obscure that for whatever reason is radically more likely to occur on your computer or with your specific usage pattern of Muse, since it's exceptionally rare for someone to reach this error and not have a file with obvious signs of hardware failure, drive removal without ejection, folder sync software issues or multiple users simultaneously editing a file on a server. -
Data Object cannot be opened / accessed error - help required
I am running a CR 2008 and have a report set against a SQL view linked via a ODBC link. The view however has been updated and now includes an extra field, which I need to add into my report.
When I use the Set Database Location to update the link I get an error message advising "Data Object cannot be opened/accessed". I click OK to this and then get a further error "Unknown Database Connector Error".
Also, when I go to refresh the report I get this error "The database table "..." cannot be found. Proceed to remove this table from the report?" - if I click no the report refreshes correctly anyway, so it must be able to connect.
I have also tried refreshing the fields in field explorer too, but the extra field doesnt appear.
Any help would be gratefully received.I can connect to the view via a new blank report and the missing field appears. However when I go to verify database it says the database cannot be found. It asks me if I want to remove it from the report, I select No then it tells me the database is uptodate.
Via the set database location it gives me the error in the initial post.
I think I have a workaround in that if I add a new database table to the same sql view the extra field is in there - so I will manually have to go though the report and change each formula, running total, group, and record selection from the original to the new table, then remove the old table.
Frustrating but it does appear to work. -
How many databases can be opened simultaneously in a single file?
To all:
I don't known how many databases can be opened simultaneously in a single file. After my application open 499 databases in a single file simultaneously, DB->open return error 12.(can not allocate memory ?).
How can i do ? Thanks.I found it:
Berkeley DB Reference Guide:
Locking Subsystem
PrevRefNext
Configuring locking: sizing the system
The lock system is sized using the following three methods:
DB_ENV->set_lk_max_locks
DB_ENV->set_lk_max_lockers
DB_ENV->set_lk_max_objects
The DB_ENV->set_lk_max_locks, DB_ENV->set_lk_max_lockers, and DB_ENV->set_lk_max_objects methods specify the maximum number of locks, lockers, and locked objects supported by the lock subsystem, respectively. The maximum number of locks is the number of locks that can be simultaneously requested in the system. The maximum number of lockers is the number of lockers that can simultaneously request locks in the system. The maximum number of lock objects is the number of objects that can simultaneously be locked in the system. Selecting appropriate values requires an understanding of your application and its databases. If the values are too small, requests for locks in an application will fail. If the values are too large, the locking subsystem will consume more resources than is necessary. It is better to err in the direction of allocating too many locks, lockers, and objects because increasing the number of locks does not require large amounts of additional resources. The default values are 1000 of each type of object.
When configuring a Berkeley DB Concurrent Data Store application, the number of lock objects needed is two per open database (one for the database lock, and one for the cursor lock when the DB_CDB_ALLDB option is not specified). The number of locks needed is one per open database handle plus one per simultaneous cursor or non-cursor operation.
Configuring a Berkeley DB Transactional Data Store application is more complicated. The recommended algorithm for selecting the maximum number of locks, lockers, and lock objects is to run the application under stressful conditions and then review the lock system's statistics to determine the maximum number of locks, lockers, and lock objects that were used. Then, double these values for safety. However, in some large applications, finer granularity of control is necessary in order to minimize the size of the Lock subsystem.
The maximum number of lockers can be estimated as follows:
* If the database environment is using transactions, the maximum number of lockers can be estimated by adding the number of simultaneously active non-transactional cursors open database handles to the number of simultaneously active transactions and child transactions (where a child transaction is active until it commits or aborts, not until its parent commits or aborts).
* If the database environment is not using transactions, the maximum number of lockers can be estimated by adding the number of simultaneously active non-transactional cursors and open database handles to the number of simultaneous non-cursor operations.
The maximum number of lock objects needed for a single database operation can be estimated as follows:
* For Btree and Recno access methods, you will need one lock object per level of the database tree, at a minimum. (Unless keys are quite large with respect to the page size, neither Recno nor Btree database trees should ever be deeper than five levels.) Then, you will need one lock object for each leaf page of the database tree that will be simultaneously accessed.
* For the Queue access method, you will need one lock object per record that is simultaneously accessed. To this, add one lock object per page that will be simultaneously accessed. (Because the Queue access method uses fixed-length records and the database page size is known, it is possible to calculate the number of pages -- and, therefore, the lock objects -- required.) Deleted records skipped by a DB_NEXT or DB_PREV operation do not require a separate lock object. Further, if your application is using transactions, no database operation will ever use more than three lock objects at any time.
* For the Hash access method, you only need a single lock object.
For all access methods, you should then add an additional lock object per database for the database's metadata page.
Note that transactions accumulate locks over the transaction lifetime, and the lock objects required by a single transaction is the total lock objects required by all of the database operations in the transaction. However, a database page (or record, in the case of the Queue access method), that is accessed multiple times within a transaction only requires a single lock object for the entire transaction.
The maximum number of locks required by an application cannot be easily estimated. It is possible to calculate a maximum number of locks by multiplying the maximum number of lockers, times the maximum number of lock objects, times two (two for the two possible lock modes for each object, read and write). However, this is a pessimal value, and real applications are unlikely to actually need that many locks. Reviewing the Lock subsystem statistics is the best way to determine this value.
I created DB_CONFIG file, and add three lines:
set_lk_max_locks 20000
set_lk_max_lockers 20000
set_lk_max_objects 20000
As the default values are 1000 of each type of object, my applicaton open 499 database(except internal database) simultaneously(CDB modal) . After changed parameters, my application opend above 6000 database. -
I cannot open Pages from the app or from a saved document on the desk top. I get an error: "The application Pages cannot be opened -1712" Any suggestions?
The following previous discussion has a solution that worked for a variety of people with the -1712 error on a variety of applications and may help: The application Safari can't be opened -1712
-
I'm using Numbers version 3.2.2.
Suddenly I cannot access my password protected Numbers file with the correct password. I have the correct password written down so I know I haven't made a mistake.
The response box that pops up says that the file cannot be opened. There are no other options for me to choose from.Also, I tried to open it through an older version of Numbers but it sent this error message.
Maybe you are looking for
-
Acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
I use the CS6 suite with Acrobat XI at windows platform. When I want to save a file from InDesign as .pdf with output intention eci_iso_coated_v2_300 the result is a .pdf with more than 300% ink coverage. I tried to transform the result in Acrobat XI
-
New Update Of IOS 6 For iPod Touch 4g
when will be the new IOS update 6 I look forward ... Thanks!
-
hi to all experts, my requirement is to delete the purchase requisitions line items if they are not converted to PO i have used bapi_requisition_delete to delete the pr here is my code will this work any inputs will be appreciated ...... this inside
-
What windows do i buy for my new macbook pro
what windows do i buy for my new macbook pro
-
Is there ANY help out there for DR MX 7.0.1?
I need help with putting a movied into my MX 7.0.1 DR web site. Everybody seems to only care abut CS5. Somebody throw me a life jacket, please.