Excel Services 2010 Error - "The workbook cannot be opened."

I enabled Excel Services and added a Excel Web Access viewer to my page. It's just a simple spreadsheet (which incidentally works fine on my standalone development server) that displays the error "The workbook cannot be opened." when the page loads. The trusted
file locations are set up appropriately. We are using Kerberos authentication.
My event viewer showed this "Critical" event (ID: 3760):
SQL Database 'Prod_WSS_Content' on SQL Server instance 'servername' not found. Additional error information from SQL Server is included below.
Cannot open database "Prod_WSS_Content" requested by the login. The login failed. Login failed for user 'domain\user'.
In other words, the service account that ECS was running under did not have permission to the content database. So I granted the user read permission on the database. Then I got the same error and this "Error" level event in the event viewer (ID: 5617):
There is a compatibility range mismatch between the Web server and database "Prod_WSS_Content", and connections to the data have been blocked to due to this incompatibility. This can happen when a content database has not been upgraded to be within the compatibility
range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the database must be upgraded to the same version and build level to return to compatibility range.
This error is typically associated with 2007 to 2010 upgrades apparently, but I did a fresh 2010 installation on a pristine machine. I found a very helpful post on the subject on the MSDN blogs:http://blogs.msdn.com/b/jjameson/archive/2010/05/04/the-workbook-cannot-be-opened-error-with-sharepoint-server-2010-and-tfs-2010.aspx
I gave the ECS service account db_owner permission on the content database. I'm still getting the error "The workbook cannot be opened." I ran the PowerShell commands listed at the bottom of the post, and no change.
What's interesting now, is that nothing at all is showing up in the event
viewer. I wonder if it is because of the statement in the event log that says "connections to the data have been blocked due to this incompatibility." Is there something on the SharePoint server blocking the connection to SQL Server that needs to be reset?
Rob Wilson - MCT. MCTS, MCITP SharePoint. http://sharepointblog.kellerschroeder.com http://www.therobman.com/blog

Hi Rob Wilson,
I suggest you to check the following things at first:
1.
What’s the version of the excel file? Excel 2003, Excel 2007 or Excel 2010? Excel Service doesn’t support Excel 2003 and easier version;
2.
Are there some features the Excel Service do not support?
More information about the Supported and Unsupported Features
http://msdn.microsoft.com/en-us/library/ff595319.aspx
3.
If the excel is connected to SQL, did you save the connect file to the Data Connection Library?
Shared your views.

Similar Messages

Unable to save mpp 2013 file, error "the file cannot be opened"

Using a local copy of Microsoft Project Pro 2013.
Opening and editing mpp files created only with 2013, never using earlier versions or format.
However, sometimes after opening a 2013 mpp file, working on it, then trying to Save, or Save-AS, pops up a message
The file "project.mpp" cannot be opened.
At this point is it IMPOSSIBLE to save the file in any way!
Can't save or Save-As to any location on my computer or network.
This is very frustrating to loose all the work done on a file. This happens in various files, never on specific files or anything else I can put my finger on.
-----------The full error is as following--------------
The file "project.mpp" cannot be opened.
* Check that the file name and path are correct.
* Check that the file format is recognized by Project.
Project files saved in versions earlier than Microsoft Project 2000 can't be opened.
If your file is from an earlier version, open in that version, click Save As (File menu), and save in MPX format. Open the MPX file in the current version of Project. When you use this method, project data is imported, but formatting is lost.
Your kind assistance please,
Thank you

Hi,
If you don't find any clue, you can send your file to me (guillaume.rouyreATgcosiDOTcom, replace cap) so I can give a try.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

In the Graphic Tab and Work Center Error The Page Cannot be displayed

Hi In the Solar01 and also in the Solman_Workcenter I am getting error "The Page Cannot be displayed"
In the Solar01 - I have Business Processes save and under the Graphic Tab when I am clicking on the correct Business Scenario Node. I am expected Graph to display. But Showing error
In the Solman_Workcenter - I set up the added the Starndard Role Busing Solaman Basic Role and + implementation role. When i go under Solman_workcenter transaction I am getting the same prolbem i.e "The Page Cannot be displayed"
Any Idea friends.
Appreciate your help
-Santh

Hi,
Refer note 834832. Check activation of services in transaction SICF and the patch level of your SAP GUI.
Thanks.
Kathir

Error :The user cannot be enabled because the end date is passed.

Hi
While running eBusiness HRMS Terminated Reconciliation, OIM picks the Users End Date and if that End Date is passed, the user is Disabled. I think the connector should behave this way. Pls correct me if I am wrong.
But, what's happening is, when I run the eBusiness HRMS Terminated Reconciliation, I am getting the below error and in the recon manager I can see the End Date as earlier date but the user is still Active. It is not changing to Disabled.
ERROR [ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.SERVER - Class/Method: tcUSR/validateProvDates Error :The user cannot be enabled because the end date is passed.
ERROR [ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.SERVER - Class/Method: tcDataObj/save Error :Data Update Failed
ERROR [ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.DATABASE - Class/Method: tcDataBase/rollbackTransaction encounter some problems: Rollback Executed From
java.lang.Exception: Rollback Executed From
     at com.thortech.xl.dataaccess.tcDataBase.rollbackTransaction(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.rollback(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.doRollback(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcRCE.modifyUserStatus(Unknown Source)
     at com.thortech.xl.dataobj.tcRCE.linkToUser(Unknown Source)
     at com.thortech.xl.dataobj.tcRCE.applyActionRules(Unknown Source)
     at com.thortech.xl.dataobj.tcRCE.checkDataSorted(Unknown Source)
     at com.thortech.xl.dataobj.tcRCE.eventPostUpdate(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcRCE.reapplyRules(Unknown Source)
     at com.thortech.xl.ejb.databeansimpl.tcRCEBean.reapplyRules(Unknown Source)
     at com.thortech.xl.ejb.beans.tcRCE_4tknfu_EOImpl.reapplyRules(tcRCE_4tknfu_EOImpl.java:200)
     at com.thortech.xl.ejb.beans.tcRCE_4tknfu_EOImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
     at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
ERROR [ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.SERVER - Class/Method: tcDataObj/save Error :Data Update Failed
ERROR [ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.DATABASE - Class/Method: tcDataBase/rollbackTransaction encounter some problems: Rollback Executed From
java.lang.Exception: Rollback Executed From
     at com.thortech.xl.dataaccess.tcDataBase.rollbackTransaction(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.rollback(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.doRollback(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcRCE.reapplyRules(Unknown Source)
     at com.thortech.xl.ejb.databeansimpl.tcRCEBean.reapplyRules(Unknown Source)
     at com.thortech.xl.ejb.beans.tcRCE_4tknfu_EOImpl.reapplyRules(tcRCE_4tknfu_EOImpl.java:200)
     at com.thortech.xl.ejb.beans.tcRCE_4tknfu_EOImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
     at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
I dont know why OIM is trying to Enable User.
Pls Help
Edited by: AAG on 25 Jan, 2011 4:12 AM
Edited by: AAG on Feb 3, 2011 12:43 AM

I am getting the same error. Any idea which field OIM considers as signal of disabling the user? Status or Termination date?

Cannot setup Blackberry Internet Mail - get error: The site cannot be accessed in this manner.

I am trying to setup email on my Blackberry, when i load the link I get error:
The site cannot be accessed in this manner. Please use the URL or link provided to you by your service provider.
Please help..
Cathy

I'm not sure why that is not working for you.
North American Carriers - scroll down to select your carrier and login.
WorldWide Carriers - Find your carrier on the list
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I can no longer access a password protected Numbers file with the correct password. Error message only says the file "cannot be opened."

I'm using Numbers version 3.2.2.
Suddenly I cannot access my password protected Numbers file with the correct password. I have the correct password written down so I know I haven't made a mistake.
The response box that pops up says that the file cannot be opened. There are no other options for me to choose from.

Also, I tried to open it through an older version of Numbers but it sent this error message.

Error: "The search cannot be executed because the table has pending changes that would be lost."

Hello,
I'm working a developing an OA page that will displays the contents of an Oracle table and allows the user to update records in a table as needed.
When I hit submit button to save the changes in the update page, the control goes back to main page (where all the table records are displayed). It displays the updated record with the new information.However when I hit "Go" button on the mainPG, I get the error "The search cannot be executed because the table has pending changes that would be lost. and the changes are not committed.
ANy suggestions on where I should look will be greatly appreciated.
Posting code for my controller
=======================
          if ( pageContext.getParameter("saveRate") != null )
          personam.invokeMethod("saveRateToDatabase");
Code from my AM
=============
    public void saveRateToDatabase()
      getOADBTransaction().commit();
      System.out.println("40--After commit has been executed");
Code from my VORowImpl
===================
package cggv.oracle.apps.gl.server;
import oracle.apps.fnd.framework.server.OAViewRowImpl;
import oracle.jbo.domain.Date;
import oracle.jbo.domain.Number;
import oracle.jbo.server.AttributeDefImpl;
// ---    File generated by Oracle ADF Business Components Design Time.
// ---    Custom code may be added to this class.
// ---    Warning: Do not modify method signatures of generated methods.
public class xxCggGlRatesVORowImpl extends OAViewRowImpl {
    public static final int RATEID = 0;
    public static final int FROMCURRENCY = 1;
    public static final int TOCURRENCY = 2;
    public static final int FROMCONVERSIONDATE = 3;
    public static final int TOCONVERSIONDATE = 4;
    public static final int USERCONVERSIONTYPE = 5;
    public static final int CONVERSIONRATE = 6;
    public static final int MODEFLAG = 7;
    /**This is the default constructor (do not remove)
    public xxCggGlRatesVORowImpl() {
    /**Gets the attribute value for the calculated attribute RateId
    public Number getRateId() {
        return (Number) getAttributeInternal(RATEID);
    /**Sets <code>value</code> as the attribute value for the calculated attribute RateId
    public void setRateId(Number value) {
        setAttributeInternal(RATEID, value);
        //populateAttribute(RATEID, value);
    /**Gets the attribute value for the calculated attribute FromCurrency
    public String getFromCurrency() {
        return (String) getAttributeInternal(FROMCURRENCY);
    /**Sets <code>value</code> as the attribute value for the calculated attribute FromCurrency
    public void setFromCurrency(String value) {
        setAttributeInternal(FROMCURRENCY, value);
    /**Gets the attribute value for the calculated attribute ToCurrency
    public String getToCurrency() {
        return (String) getAttributeInternal(TOCURRENCY);
    /**Sets <code>value</code> as the attribute value for the calculated attribute ToCurrency
    public void setToCurrency(String value) {
        setAttributeInternal(TOCURRENCY, value);
    /**Gets the attribute value for the calculated attribute FromConversionDate
    public Date getFromConversionDate() {
        return (Date) getAttributeInternal(FROMCONVERSIONDATE);
    /**Sets <code>value</code> as the attribute value for the calculated attribute FromConversionDate
    public void setFromConversionDate(Date value) {
        setAttributeInternal(FROMCONVERSIONDATE, value);
    /**Gets the attribute value for the calculated attribute ToConversionDate
    public Date getToConversionDate() {
        return (Date) getAttributeInternal(TOCONVERSIONDATE);
    /**Sets <code>value</code> as the attribute value for the calculated attribute ToConversionDate
    public void setToConversionDate(Date value) {
        setAttributeInternal(TOCONVERSIONDATE, value);
    /**Gets the attribute value for the calculated attribute UserConversionType
    public String getUserConversionType() {
        return (String) getAttributeInternal(USERCONVERSIONTYPE);
    /**Sets <code>value</code> as the attribute value for the calculated attribute UserConversionType
    public void setUserConversionType(String value) {
        setAttributeInternal(USERCONVERSIONTYPE, value);
    /**Gets the attribute value for the calculated attribute ConversionRate
    public Number getConversionRate() {
        return (Number) getAttributeInternal(CONVERSIONRATE);
    /**Sets <code>value</code> as the attribute value for the calculated attribute ConversionRate
    public void setConversionRate(Number value) {
        setAttributeInternal(CONVERSIONRATE, value);
    /**Gets the attribute value for the calculated attribute ModeFlag
    public String getModeFlag() {
        return (String) getAttributeInternal(MODEFLAG);
    /**Sets <code>value</code> as the attribute value for the calculated attribute ModeFlag
    public void setModeFlag(String value) {
        setAttributeInternal(MODEFLAG, value);
    /**getAttrInvokeAccessor: generated method. Do not modify.
    protected Object getAttrInvokeAccessor(int index,
                                           AttributeDefImpl attrDef) throws Exception {
        switch (index) {
        case RATEID:
            return getRateId();
        case FROMCURRENCY:
            return getFromCurrency();
        case TOCURRENCY:
            return getToCurrency();
        case FROMCONVERSIONDATE:
            return getFromConversionDate();
        case TOCONVERSIONDATE:
            return getToConversionDate();
        case USERCONVERSIONTYPE:
            return getUserConversionType();
        case CONVERSIONRATE:
            return getConversionRate();
        case MODEFLAG:
            return getModeFlag();
        default:
            return super.getAttrInvokeAccessor(index, attrDef);
    /**setAttrInvokeAccessor: generated method. Do not modify.
    protected void setAttrInvokeAccessor(int index, Object value,
                                         AttributeDefImpl attrDef) throws Exception {
        switch (index) {
        case RATEID:
            setRateId((Number)value);
            return;
        case FROMCURRENCY:
            setFromCurrency((String)value);
            return;
        case TOCURRENCY:
            setToCurrency((String)value);
            return;
        case FROMCONVERSIONDATE:
            setFromConversionDate((Date)value);
            return;
        case TOCONVERSIONDATE:
            setToConversionDate((Date)value);
            return;
        case USERCONVERSIONTYPE:
            setUserConversionType((String)value);
            return;
        case CONVERSIONRATE:
            setConversionRate((Number)value);
            return;
        case MODEFLAG:
            setModeFlag((String)value);
            return;
        default:
            super.setAttrInvokeAccessor(index, value, attrDef);
            return;
    /**Gets xxCggGlRatesEO entity object.
    public xxCggGlRatesEOImpl getxxCggGlRatesEO() {
        return (xxCggGlRatesEOImpl)getEntity(0);

Hi,
Check these links:
Oracle Apps: Search cannot be executed because the table has pending changes that would be lost
Re: Getting error in search page search cannot be executed
http://jneelmani.blogspot.in/2009/11/oaf-search-cannot-be-executed-because.html
--Sushant

"Error:The search cannot be executed because the table has pending changes that would be lost", after DELETE

Good day,
On Search Page, I have searched for the record(s) then deleted a record and got confirmation message i.e. Record has deleted. Next when I search for any record I'm getting below error.
Error
The search cannot be executed because the table has pending changes that would be lost.
Could you please help me to fix this issue. Your response is highly appreciated.
Item properties:
Item Style : Image
Action Type: Fire Action
Event : delete
Below is the code using in CO and AM
Controller (processFormRequest):
if ("delete".equals(pageContext.getParameter(EVENT_PARAM)))
          // The user has clicked a "Delete" icon so we want to display a "Warning"
          // dialog asking if she really wants to delete the employee. Note that we
          // configure the dialog so that pressing the "Yes" button submits to
          // this page so we can handle the action in this processFormRequest( ) method.
          String visit_id = pageContext.getParameter("visit_id");
          String employeeName = pageContext.getParameter("last_name") + ", " + pageContext.getParameter("first_name");
          MessageToken[] tokens = { new MessageToken("EMP_NAME", employeeName)};
          OAException mainMessage = new OAException("FND", "XXXX_EMP_DELETE_WARN", tokens);
          // Note that even though we're going to make our Yes/No buttons submit a
          // form, we still need some non-null value in the constructor's Yes/No
          // URL parameters for the buttons to render, so we just pass empty
          // Strings for this.
          OADialogPage dialogPage = new OADialogPage(OAException.WARNING,
            mainMessage, null, "", "");
          // Always use Message Dictionary for any Strings you want to display.
          String yes = pageContext.getMessage("AK", "FWK_TBX_T_YES", null);
          String no = pageContext.getMessage("AK", "FWK_TBX_T_NO", null);
          // We set this value so the code that handles this button press is
          // descriptive.
dialogPage.setOkButtonItemName("DeleteYesButton");
          // The following configures the Yes/No buttons to be submit buttons,
          // and makes sure that we handle the form submit in the originating
          // page (the "Employee" summary) so we can handle the "Yes"
          // button selection in this controller.
dialogPage.setOkButtonToPost(true);
dialogPage.setNoButtonToPost(true);
dialogPage.setPostToCallingPage(true);
          // Now set our Yes/No labels instead of the default OK/Cancel.
dialogPage.setOkButtonLabel(yes);
dialogPage.setNoButtonLabel(no);
          // We need to keep hold of the employeeNumber and employeeName.
          // The OADialogPage gives us a convenient means
          // of doing this. Note that the use of the Hashtable is
          // most appropriate for passing multiple parameters. See the OADialogPage
          // javadoc for an alternative when dealing with a single parameter.
          java.util.Hashtable formParams = new java.util.Hashtable(1);
formParams.put("visit_id", visit_id);
formParams.put("empName", employeeName);
dialogPage.setFormParameters(formParams);
          pageContext.redirectToDialogPage(dialogPage);
    else if (pageContext.getParameter("DeleteYesButton") != null)
          // User has confirmed that she wants to delete this employee.
          // Invoke a method on the AM to set the current row in the VO and
          // call remove() on this row.
          String employeeNumber = pageContext.getParameter("visit_id");
          String employeeName = pageContext.getParameter("empName");
          Serializable[] parameters = { employeeNumber };
         // OAApplicationModule am = pageContext.getApplicationModule(webBean);
am.invokeMethod("deleteEmployee", parameters);
          // Now, redisplay the page with a confirmation message at the top. Note
          // that the deleteEmployee() method in the AM commits, and our code
          // won't get this far if any exceptions are thrown.
          MessageToken[] tokens = { new MessageToken("EMP_NAME", employeeName) };
          OAException message = new OAException("FND",
            "XXXX_EMP_DELETE_CONFIRM", tokens, OAException.CONFIRMATION, null);
pageContext.putDialogMessage(message);
Application Module:
public void deleteEmployee(String visit_id)
        // First, we need to find the selected employee in our VO.
        // When we find it, we call remove( ) on the row which in turn
        // calls remove on the associated EmployeeEOImpl object.
        int empToDelete = Integer.parseInt(visit_id);
          OAViewObject vo = (OAViewObject)getNonEmployeesSummaryVO1();
    NonEmployeesSummaryVORowImpl row = null;
        // This tells us the number of rows that have been fetched in the
        // row set, and will not pull additional rows in like some of the
        // other "get count" methods.
       int fetchedRowCount = vo.getFetchedRowCount();
        // We use a separate iterator -- even though we could step through the
        // rows without it -- because we don't want to affect row currency.
        RowSetIterator deleteIter = vo.createRowSetIterator("deleteIter");
if (fetchedRowCount > 0)
          deleteIter.setRangeStart(0);
          deleteIter.setRangeSize(fetchedRowCount);
          for (int i = 0; i < fetchedRowCount; i++)
            row = (NonEmployeesSummaryVORowImpl)deleteIter.getRowAtRangeIndex(i);
            // For performance reasons, we generate ViewRowImpls for all
            // View Objects. When we need to obtain an attribute value,
            // we use the named accessors instead of a generic String lookup.
            // Number primaryKey = (Number)row.getAttribute("EmployeeId");
            Number primaryKey = row.getVisitId();
            if (primaryKey.compareTo(empToDelete) == 0)
              // This performs the actual delete.
              row.remove();
                getTransaction().commit();
              break; // only one possible selected row in this case
        // Always close the iterator when you're done.
        deleteIter.closeRowSetIterator();
      } // end deleteEmployee
Thanks,
Ravi

Hi
Check this link Getting error in search page search cannot be executed
Regards,
Dilip

Bridge CC will not open. Reads "Error: The operation cannot be completed"

Hello,
I just recently downloaded Creative Cloud. I am working on a Mac OSX 10.9.5 and I downloaded Creative Cloud to use both Photoshop and Bridge. Photoshop opens and is working however, Bridge opens for 1 second and then give me the message, "Error: The operation cannot be completed", and then shuts off.
I uninstalled the program and re-installed but still the same problem. Any suggestions would be appreciated.

Right-click on the file and choose *Get Info*. At the bottom of the window you will see *Sharing & Permissions*. Click on the lock and enter you password. If your name is there change the permission to Read & Write. If not, add your name to the list and make sure it's set to Read & Write. You should now have access.

Error: "The system cannot find the file specified" when trying to print to PDF w/ Acrobat 9.5

I get an Error: "The system cannot find the file specified" when trying to print to PDF w/ Acrobat 9.5 using Windows 7. This just started happening after upgrading to MS 2013 suite and also installed Adobe Reader at that same time.
I had problems in the past when Reader was installed with Acrobat, so I uninstalled Reader, but the problem still seems to occur.
any help would be appreciated.

That link has backslashes (%5C) that need to be changed to forward slashes:
*http://supportdocs.sonybiz.net/indexes/pi/LFS/May_2004/00035186.pdf

Sql server services give error the remote procedure call failed [0x800706be] in sql server 2008

sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
but it does not work.
Plz give the exact soln to solve this error.

sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
but it does not work.
Plz give the exact soln to solve this error.
So when you tried starting SQL server service it gave the error right ? or when you click on SQL server services in SQL server configuration manager(SSCM) you get this error. Can you be more clear. As far as I read your question it has something
to do with permission. Close SSCM window and this time right click on SQL server configuration manager and select run as administrator and check if you can see SQL server services
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

Start-Process : This command cannot be run due to the error: The system cannot find the file specified.

Hi,
I need some help with my script. It copies the file to the remote laptops but when it needs to install the .exe it fails.
If I run 1 line at the time in Powershell ISE, then it works. Somebody has an idea why it doesn't work or can help me on the right way?
Script:
$laptops = Get-Content -Path "C:\Users\bruyld01\Documents\STEPSTONE\Powershell\SAP\LaptopList.txt"
foreach ($laptop in $laptops)
Copy-Item "C:\Users\bruyld01\Desktop\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V5.exe" -Destination \\$laptop\C$\
Enter-PSSession $laptop
$version = Get-WmiObject -Class Win32_Product | where {$_.Name -like "*SAP Business*"} | Select-Object Version
if ($version -ne "135.0.2071.1047")
Start-Process -Filepath "C:\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V5.exe" -ArgumentList "/quiet"
else
Write-Host "SAP outlook add-in is up to date!" -ForegroundColor Green
Exit-PSSession
Error message:
Start-Process : This command cannot be run due to the error: The system cannot find the file specified.
At line:2 char:1
+ Start-Process -Filepath "C:\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [Start-Process], InvalidOperationException
+ FullyQualifiedErrorId : InvalidOperationException,Microsoft.PowerShell.Commands.StartProcessCommand
Thanks,
Dimitri

Hi,
Enter-PSSession is used for interactive remote sessions. Look into Invoke-Command instead.
http://ss64.com/ps/invoke-command.html
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Data Manger error: the system cannot find the file specified.

Hi,
I am using VPN to connect to MDM repository and get error:
the system cannot find the file specified. Windows sockets error code 2. And forced exit data manager. However I can login the other repository on the MDM server. Can you suggest any way to fix? Thanks!
David

It really does sound as if you are having a problem with ports. If you are able to connect to even one repository, then the problem is not with the Data Manager.
Here is how you can check:
1) Open the MDM Console, and note the port numbers of the loaded repositories.
2) Now open a Command Prompt window and type the following command:
telnet [mdm server] [repository port]
(you can use either the machine name or IP address for mdm server).
For example:
telnet 10.20.30.40 5500
You should get an empty command-type window with no error messages. This indicates success. You can close the window by clicking on the "X". Try this with the one repository which works in the DM, and then with the other repositories.
Let us know the results,
Walter

Error "The System cannot find the specified" when installing XI3.1 FP1.3

Error "The System cannot find the specified" happened when installing XI3.1 FP1.3 to client machine, however the installation is OK to server.
After the error, go to Control Panel -> Add or Remove Programs, and observe.
BusinessObjects Enterprise XI 3.1 Client Tools is installed,
but BusinessObjects Enterprise XI 3.1 Client Tools Japanese Language Pack is not.
And Language Pack install log is not written.
The same error happened when installing .net2.0.
The installation for FP1.2 is OK.
Would you tell me what reason probablely this issue is?
Thanks.

Hello Sarah,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Whille copying error ""The operation cannot be completed because you do ...

Hi there I read a lot of post regarding this problem, I have some files that I copied from a USB drive that I can't copy since I have the error "The operation cannot be completed because you do not have sufficient privileges for some of the items." when I try to copy them to another disk (trying different disks there is no difference)

Right-click on the file and choose *Get Info*. At the bottom of the window you will see *Sharing & Permissions*. Click on the lock and enter you password. If your name is there change the permission to Read & Write. If not, add your name to the list and make sure it's set to Read & Write. You should now have access.

Excel Services 2010 Error - "The workbook cannot be opened."

Similar Messages

Maybe you are looking for