Database check in chaining process
Hi,
i have first transaction ME21N.
It o/p of this transaction is Standard order.
For the given 'order type# in this trasaction, If release is not attached, then i have to go to ME28.
If it Standard order is having the entry in the db table, then i have to execute MEGO.
For that i have to check
select count(*) from AUSP into x where ATWRT = 'ZNB' and MANDT = 400
where x is local variable.
If x = 0.
call MEGO
else.
call ME28.
endif.
It is not executing.. Can any one of u suggest the best solution.
Regards,
Hi Sree,
Try the one which I have answered in other question, if that doesnt work we shall think of something else.
Cheers,
Harsha
Similar Messages
-
How to check the scheduled process chain in SM37
Hi Experts,
Can anyone tell me how do I check whether my process chain has been scheduled or not.
I checked in sm37 all the jobs that are under released status. Im getting about 10 jobs.
I dont know which one is belogs to my process chain as they do not have the process chain names.
Can anyone please let me know how do I confirm whether one of the released jobs below to my process chain.
Thanks in advance.Hi,
To find this out, in sm37, select the job and click on step button in toolbar. You would find the program name RSPROCESS.
Click on this job and then go to menu bar and select goto-> variant.
In the variant, you can see the process chain that has been used for this job. -
Error when executing database check using brconnect or in DB13.
Dear Experts,
I am facing problem in executing database check using brconnect or in DB13.
I get the following error:-
<b>I am giving the last few lines where the error comes</b>
G:\oracle\MRP\sapbackup 6 52228060 20440724 60.86 0 0
G:\oracle\MRP\sapcheck 6 52228060 20440724 60.86 0 0
G:\oracle\MRP\sapreorg 6 52228060 20440724 60.86 0 0
BR0252E Function _stat() failed for 'G:\oracle\MRP\saptrace' at location BrDiskStatGet-1
BR0253E errno 2: No such file or directory
BR0277E Determination of disk volume status for G:\oracle\MRP\saptrace failed
BR0806I End of BRCONNECT processing: cdvnwuiw.chk 2007-06-23 16.45.39
BR0280I BRCONNECT time stamp: 2007-06-23 16.45.39
BR0804I BRCONNECT terminated with error
<b>This is the config path in my init<sid>.ora.</b>
*._OPTIM_PEEK_USER_BINDS=FALSE
*.background_dump_dest='F:\oracle\MRP\saptrace\background'
*.compatible='10.2.0'
*.control_file_record_keep_time=30
*.control_files='G:\oracle\MRP\origlogA\cntrl\cntrlMRP.dbf','G:\oracle\MRP\origlogB\cntrl\cntrlMRP.dbf','G:\oracle\MRP\sapdata1\cntrl\cntrlMRP.dbf'
*.core_dump_dest='F:\oracle\MRP\saptrace\background'
*.db_block_size=8192
*.db_cache_size=281699942
*.db_files=254
*.db_name='MRP'
*.dml_locks=4000
*.event='10191 trace name context forever, level 1'
*.FILESYSTEMIO_OPTIONS='setall'
*.job_queue_processes=1
*.log_archive_dest='F:\oracle\MRP\oraarch\MRParch'
*.log_buffer=1048576
*.log_checkpoint_interval=0
*.log_checkpoints_to_alert=true
*.open_cursors=800
*.optimizer_features_enable='10.2.0.1'
*.pga_aggregate_target=375599923
*.processes=80
*.recyclebin='off'
*.remote_login_passwordfile='exclusive'
*.remote_os_authent=true
*.sessions=96
*.sga_max_size=563399884
*.shared_pool_reserved_size=28169994
*.shared_pool_size=281699942
*.sort_area_retained_size=0
*.sort_area_size=2097152
*.statistics_level='typical'
*.undo_management='AUTO'
*.undo_retention=43200
*.undo_tablespace='PSAPUNDO'
*.user_dump_dest='F:\oracle\MRP\saptrace\usertrace'
*.workarea_size_policy='AUTO'
<b>The path in my system is same as mentioned in the init<sid>.ora</b>
Please help me to find out cause of the error.
ThanksDear Mr. Yaroslav,
Thanks,
I have checked in <sid>adm user since we have looged in the same user Id.
There was no entrie for the SAPTRACE in environmental variable.
I have inserted and given the requried path"F:\oracle\MRP\saptrace".
Thankyou....hope in my next restart of the server it will work.... -
Hello
My subca certificate was about to expire so I renewed it with the same key and since then my wireless will not connect. I get the following error from NPS:
Network Policy Server denied access to a user.
Contact the Network Policy Server administrator for more information.
User:
Security ID:
AD\4411CB8CD34A2AA$
Account Name:
host/4411CB8CD34A2AA.ad.***.org
Account Domain:
AD
Fully Qualified Account Name:
AD\4411CB8CD34A2AA$
Client Machine:
Security ID:
NULL SID
Account Name:
Fully Qualified Account Name:
OS-Version:
Called Station Identifier:
f4-1f-c2-e6-0e-40:***-private
Calling Station Identifier:
e0-06-e6-c2-96-b7
NAS:
NAS IPv4 Address:
10.0.2.85
NAS IPv6 Address:
NAS Identifier:
DOM-WLC1
NAS Port-Type:
Wireless - IEEE 802.11
NAS Port:
13
RADIUS Client:
Client Friendly Name:
NPS Proxy 1
Client IP Address:
10.0.2.12
Authentication Details:
Connection Request Policy Name:
Wireless Clients
Network Policy Name:
Wireless Clients
Authentication Provider:
Windows
Authentication Server:
DOM-DC1.ad.****.org
Authentication Type:
EAP
EAP Type:
Microsoft: Smart Card or other certificate
Account Session Identifier:
Logging Results:
Accounting information was written to the local log file.
Reason Code:
295
Reason:
A certification chain processed correctly, but one of the CA certificates is not trusted by the policy provider.
How do i make the policy provider trust this new certificate that was created? When i renewed the certificate everything looks good on the subca and root ca. The new certificate is not in the nps servers so i tried manually importing it and that still did
not work. I noticed when i open the wireless network policy properties under constraints and open the Microsoft: Smart Card or other certificate eap type the new certificate is not in there. Any suggestions? Thank you!can you copy client certificate to NPS server and run the following command against this certificate:
certutil -verify -urlfetch path\clientcert.cer
and show us the output.
Vadims Podāns, aka PowerShell CryptoGuy
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell File Checksum Integrity Verifier tool. -
Hi all.
I have stanalone offline RootCA, and enterprise domain SubCA on DC on Windows 2012 server. I have Windows 2003 Terminal Server, users logon to TS via smart cards - and this work fine.
Now I added Windows server 2012 as "Terminal Server".
Now I added Windows server 2012 R2 as "Terminal Server".
I configured both servers identically.
Users can logon via smart card to Windows Server 2012.
Users CAN NOT logon via smart card to Windows Server 2012 R2.
When user trying to logon via smart card, they have information:
"An untrusted cartification authority was detected while processing the domain controller certificate used for authentication. Additional information..."
I run a certutil.exe -scinfo on both Windows 2012/2012R2 servers.
I found differences in the (~) same place in the output log.
On Windows 2012:
Exclude leaf cert:
b4 44 8f fb fb b4 5f 03 39 76 dc cc e8 da 02 e0 d0 cc b6 32
Full chain:
c8 3d 07 12 ea 4d 0e 5a 8c 50 fc 56 2e 51 f1 68 6a 26 90 77
Verified Issuance Policies: None
Verified Application Policies:
1.3.6.1.5.5.7.3.2 Client Authentication
1.3.6.1.4.1.311.20.2.2 Smart Card Logon
On Windows 2012 R2:
Exclude leaf cert:
78 7e 6c 60 3f 20 c6 f6 e8 74 c8 36 e3 d3 88 ac 12 60 41 32
Full chain:
b8 a9 fa 6c db 07 cd 32 86 17 8c 88 02 ba d0 4b 8c ac 2d 58
Issuer: CN=XXX CA, OU=Certification Services, O=XX, C=XX
NotBefore: 2013-11-22 12:42
NotAfter: 2014-11-22 12:42
Subject: CN=XX Test, OU=XX, OU=UXX, DC=XX, DC=com
Serial: 7a0084f
SubjectAltName: Other Name:Principal Name=XX@XX
Template: Smartcard Logon Behalf 2048
1d 2a bb dc 2a 9c 70 0d b5 35 47 44 ee 61 60 ab 71 97 66 ff
A certification chain processed correctly, but one of the CA certificates is not trusted by the policy provider. 0x800b0112 (-2146762478)
I run a certutil -verify xx.cer on both Servers 2012/2012R2 and on both servers have the ~exact same thing.
Windows 2012:
Exclude leaf cert:
f6 0e 96 da c7 08 9a 78 12 97 a6 b6 22 df 57 9d e7 03 41 df
Full chain:
f0 fb 19 66 e8 6c 4f ea b4 d5 ea 6d 5e 38 54 07 b0 9f 52 96
Verified Issuance Policies: None
Verified Application Policies:
1.3.6.1.4.1.311.20.2.2 Smart Card Logon
1.3.6.1.5.5.7.3.2 Client Authentication
Leaf certificate revocation check passed
Windows 2012 R2:
Exclude leaf cert:
84 18 5b 9d 06 61 60 73 c6 37 80 f4 25 33 c4 d3 5e ef 4a 93
Full chain:
63 8e 9e 37 78 c9 93 bb 4d da f4 e3 4b 7e 2b 14 49 28 0f 5d
Verified Issuance Policies: None
Verified Application Policies:
1.3.6.1.4.1.311.20.2.2 Smart Card Logon
1.3.6.1.5.5.7.3.2 Client Authentication
Leaf certificate revocation check passed
Whether Windows 2012R2 is not trying to build a certificate path, treating smart card logon certificate as (Sub)CA certificate?
Previous and probably wrong idea:
The only thing that comes to my mind is my SubCA.
I have two CA Certyficates:
Certyficate #0 (expired)
Certyficate #1 <- valid.
I guess that all Windows before Windows 2012 R2 build certyficafion chain from valid (second #1) certyficate. Windows 2012 R2 take first and we have:
"A certification chain processed correctly, but one of the CA certificates is not trusted by the policy provider.
[ value] 800B0112 "
This is a bug or feature?
How I can fix this without removal Certificate #0 from my SubCA?
Best regards
Jacek Marek
MCSA Windows Server 2012Hi,
Glad to hear that the issue is solved!
Thank you very much for your sharing!
Please feel free to let us know if you encounter any issues in the future.
Best Regards,
Amy -
Hi all.
I have stanalone offline RootCA, and enterprise domain SubCA on DC on Windows 2012 server. I have Windows 2003 Terminal Server, users logon to TS via smart cards - and this work fine.
Now I added Windows server 2012 as "Terminal Server".
Now I added Windows server 2012 R2 as "Terminal Server".
I configured both servers identically.
Users can logon via smart card to Windows Server 2012.
Users CAN NOT logon via smart card to Windows Server 2012 R2.
When user trying to logon via smart card, they have information:
"An untrusted cartification authority was detected while processing the domain controller certificate used for authentication. Additional information..."
The only thing that comes to my mind is my SubCA.
I have two CA Certyficates:
Certyficate #0 (expired)
Certyficate #1 <- valid.
I guess that all Windows before Windows 2012 R2 build certyficafion chain from valid (second #1) certyficate. Windows 2012 R2 take first and we have:
"A certification chain processed correctly, but one of the CA certificates is not trusted by the policy provider.
[ value] 800B0112 "
This is a bug or feature?
How I can fix this without removal Certificate #0 from my SubCA?
Best regards
Jacek Marek
MCSA Windows Server 2012Hi,
I run a certutil.exe -scinfo on both Windows 2012/2012R2 servers.
I found differences in the (~) same place in the output log.
On Windows 2012:
Exclude leaf cert:
b4 44 8f fb fb b4 5f 03 39 76 dc cc e8 da 02 e0 d0 cc b6 32
Full chain:
c8 3d 07 12 ea 4d 0e 5a 8c 50 fc 56 2e 51 f1 68 6a 26 90 77
Verified Issuance Policies: None
Verified Application Policies:
1.3.6.1.5.5.7.3.2 Client Authentication
1.3.6.1.4.1.311.20.2.2 Smart Card Logon
On Windows 2012 R2:
Exclude leaf cert:
78 7e 6c 60 3f 20 c6 f6 e8 74 c8 36 e3 d3 88 ac 12 60 41 32
Full chain:
b8 a9 fa 6c db 07 cd 32 86 17 8c 88 02 ba d0 4b 8c ac 2d 58
Issuer: CN=XXX CA, OU=Certification Services, O=XX, C=XX
NotBefore: 2013-11-22 12:42
NotAfter: 2014-11-22 12:42
Subject: CN=XX Test, OU=XX, OU=UXX, DC=XX, DC=com
Serial: 7a0084f
SubjectAltName: Other Name:Principal Name=XX@XX
Template: Smartcard Logon Behalf 2048
1d 2a bb dc 2a 9c 70 0d b5 35 47 44 ee 61 60 ab 71 97 66 ff
A certification chain processed correctly, but one of the CA certificates is not trusted by the policy provider. 0x800b0112 (-2146762478)
I run a certutil -verify xx.cer on both Servers 2012/2012R2 and on both servers have the ~exact same thing.
Windows 2012:
Exclude leaf cert:
f6 0e 96 da c7 08 9a 78 12 97 a6 b6 22 df 57 9d e7 03 41 df
Full chain:
f0 fb 19 66 e8 6c 4f ea b4 d5 ea 6d 5e 38 54 07 b0 9f 52 96
Verified Issuance Policies: None
Verified Application Policies:
1.3.6.1.4.1.311.20.2.2 Smart Card Logon
1.3.6.1.5.5.7.3.2 Client Authentication
Leaf certificate revocation check passed
Windows 2012 R2:
Exclude leaf cert:
84 18 5b 9d 06 61 60 73 c6 37 80 f4 25 33 c4 d3 5e ef 4a 93
Full chain:
63 8e 9e 37 78 c9 93 bb 4d da f4 e3 4b 7e 2b 14 49 28 0f 5d
Verified Issuance Policies: None
Verified Application Policies:
1.3.6.1.4.1.311.20.2.2 Smart Card Logon
1.3.6.1.5.5.7.3.2 Client Authentication
Leaf certificate revocation check passed
Any idea, or I must open case with Microsoft support?
Best regards
Jacek Marek
MCSA Windows Server 2012 -
DB13 Database check getting following error
Job started
Step 001 started (program RSDBAJOB, variant &0000000000116, user ID KMDBASIS)
No application server found on database host - rsh/gateway will be used
Execute logical command BRCONNECT On host sapbwpor3
Parameters: -u / -jid CHECK20070822134120 -c -f check
BR0801I BRCONNECT 7.00 (26)
BR0252E Function NetShareGetInfo() failed for 'sapmnt' at location BrEnvProcess-89
BR0253E errno 2310: This shared resource does notexist.
BR0806I End of BRCONNECT processing: cdvzfvhd.log2007-08-22 13.41.25
BR0280I BRCONNECT time stamp: 2007-08-22 13.41.25
BR0804I BRCONNECT terminated with errors
External program terminated with exit code 3
BRCONNECT returned error status E
Job finishedthis post is duplicated at DB13 Database check getting following error.
-
Error in Remote Chain process type
Hello All,
I have a requirement wherein after one process chain in BW is finished another on in APO server should start.
So i created a remote chain process type.
In the destination i have given the APO system and then name of the process chain from APO system and in the destination for call back i have given BW system.
When i check the process chain, it is giving an error as error in definition of the process chain.
Has anyone ever used remote chain and faced such an issue.
Thanks and Regards,
MansiHi,
process chain are stored in tables RSPC* -->RSPCCHAINT store the text.chk the definition there.
Hope this helps,
regards
CSM Reddy -
Hi Experts,
I am getting the following error when I am starting database check through brconnect.
C:\Documents and Settings\devadm>brconnect -f check
BR0801I BRCONNECT 6.40 (42)
BR0805I Start of BRCONNECT processing: cdzgcybo.chk 2008-11-13 16.46.40
BR0484I BRCONNECT log file: D:\oracle\DEV\sapcheck\cdzgcybo.chk
BR0280I BRCONNECT time stamp: 2008-11-13 16.46.42
BR0301E SQL error -1017 at location db_connect-2
ORA-01017: invalid username/password; logon denied
BR0310E Connect to database instance DEV failed
BR0280I BRCONNECT time stamp: 2008-11-13 16.46.43
BR0301E SQL error -1017 at location db_connect-2
ORA-01017: invalid username/password; logon denied
BR0310E Connect to database instance DEV failed
BR0806I End of BRCONNECT processing: cdzgcybo.chk 2008-11-13 16.46.42
BR0280I BRCONNECT time stamp: 2008-11-13 16.46.43
BR0804I BRCONNECT terminated with errors
Pl. suggets.
Thanks
Neerajhi neeraj,
use this command :
brconnect -u / -c -f check
to check your database.
ardhian
http://sapbasis.wordpress.com
http://ardhian.kioslinux.com -
Error in executing Database Check on SRM Server (BRCONNECT)
Dear All,
When executing the Database check by DB13 or BRTOOLS I am getting the following Error.
BR0477I Oracle pfile /oracle/FRP/102_64/dbs/initFRP.ora created from spfile /oracle/FRP/102_64/dbs/spfileFRP.ora
BR1301W Error message from likeywlib:
===...could not load SSF library libsapsecu.o .
BR1301W Error message from likeywlib: likey_init:Couldn't load SAPSECULIB ("libsapsecu.o") using function SsfSupInit (), rc = 1
BR1302E Initialization of license key library likeywlib failed, return code 1
BR0602E No valid SAP license found - please contact SAP
BR0806I End of BRCONNECT processing: cegxjpxo.log2011-10-03 14.02.25
BR0280I BRCONNECT time stamp: 2011-10-03 14.02.25
BR0804I BRCONNECT terminated with errors
I have following profile parameters
ssl/ssl_lib /usr/sap/FRP/SYS/exe/run/libsapcrypto.o
ssf/ssfapi_lib /usr/sap/FRP/SYS/exe/run/libsapcrypto.o
sec/libsapsecu /usr/sap/FRP/SYS/exe/run/libsapcrypto.o
ssf/name SAPSECULIB
I have maintained DIR_LIBRARY as Environment variable with /usr/sap/FRP/SYS/exe/run and all the library files are maintained at above said location including libsapsecu.o which have 777 permission at AIX level.
Please Helpu2026u2026u2026u2026u2026..
Regards,
Manish SachanThanks, Sunny
Problem has been solved by the help of your suggested NOTE....................
Regards,
Manish Sachan -
Script for checking the replication process in Netscape Directory Sever 4.1
Hi,
We are using Netscape Directory Server 4.1.6 in our production environment. Where we want to know is there any script available to check the replication process. Or can we write a script to check the process.
Waiting for your replies at the earliest.
Thanks,
Syed A.Hi Syed,
Replication state is very easy to see in 4.x and earlier. The last changenumber in the supplier changelog is visible (on the root DSE IIRC), and each consumer suffix has an operational attribute "copiedfrom" that tells you the name of the supplier, the database generation id, and the last change replayed from the supplier.
So a script that compares the results of
ldapsearch -h <supplier> -s base -b "" "objectclass=*" lastchangenumber
and
ldapsearch -h <consumer> -s base -b <base_suffix> "objectclass=*" copiedFrom
will show you if a replica has fallen out of sync. It won't tell you more than how many changes behind the replica is, though, because pre-5.x changenumbers are sequential integers, not timestamps.
However, the change that corresponds to the changenumber is clearly visible under the "cn=changelog" suffix. So if you look at the change itself you can see the timestamp on it.
For more info on the status of replication, you should be able to query the agreements on the supplier. Those live under the "Netscape Machine Data Suffix", which you can also find on the supplier's root DSE:
ldapsearch -h <supplier> -s base -b "" "objectclass=*" netscapemdsuffix
And of course the error logs will usually tell you if replication is failing outright.
I may be off on some of the attribute names, but if you do some investigating along these lines, you should be able to figure it out. -
I can't burn a cd of my own created music. I either get the error 4261, or after "Checking media" the process stops and nothing further happens. Have tried different burn speeds and cds. Have re-installed iTunes.Any suggestions please?
wm0203Sounds like the CD drive died. Luckily they cost next to nothing to replace. Or get an external LaCie instead. I have a dual G4 1.25 and the CD drive was always so anemic I use a LaCie Porsche with it.
-
No amount if check on "Manual Processing Only" in KKA1
Hi Expert,
I am running Results Analysis for Internal Order. If i run without check on "Manual Processing Only", WIP Act.Cost will come out with amount in column WIPR COP.
If i run with check on "Manual Processing Only", there was zero amount in WIP cumulative balances column.
Results Analysis Category Line ID
WIPR COL
WIPR COP
WIPR COS
RUCR COL
RUCR COP
RUCR COS
Please advice is there any configuration is missing or need enhancement?
Thanks.
regards,
ng chong chuanHi Expert,
I able to solve this issue, i need to tick save when execute Results Analysis Key for the internal order.
Thanks. -
hi all,
I am getting following error while doing Database check in my system:
BR0976W Database message alert - level: ERROR, line: 7649, time: 2010-08-26 22.56.27, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 63489 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7650, time: 2010-08-26 22.56.27, message:
ORA-27063: number of bytes read/written is incorrect
BR0976W Database message alert - level: ERROR, line: 7654, time: 2010-08-26 22.56.27, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 63489 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7657, time: 2010-08-26 22.56.27, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 63489 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7658, time: 2010-08-26 22.56.27, message:
ORA-27063: number of bytes read/written is incorrect
BR0976W Database message alert - level: ERROR, line: 7662, time: 2010-08-26 22.56.27, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 63489 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7669, time: 2010-08-26 22.56.27, message:
ORA-16038: log 1 sequence# 28567 cannot be archived
BR0976W Database message alert - level: ERROR, line: 7670, time: 2010-08-26 22.56.27, message:
ORA-19502: write error on file "", blockno (blocksize=)
BR0976W Database message alert - level: ERROR, line: 7675, time: 2010-08-26 22.56.27, message:
ORA-16038: log 1 sequence# 28567 cannot be archived
BR0976W Database message alert - level: ERROR, line: 7676, time: 2010-08-26 22.56.27, message:
ORA-19502: write error on file "", blockno (blocksize=)
BR0976W Database message alert - level: ERROR, line: 7686, time: 2010-08-26 22.57.02, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7687, time: 2010-08-26 22.57.02, message:
ORA-27063: number of bytes read/written is incorrect
BR0976W Database message alert - level: ERROR, line: 7691, time: 2010-08-26 22.57.02, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7694, time: 2010-08-26 22.57.02, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7695, time: 2010-08-26 22.57.02, message:
ORA-27063: number of bytes read/written is incorrect
BR0976W Database message alert - level: ERROR, line: 7699, time: 2010-08-26 22.57.02, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7709, time: 2010-08-26 22.58.02, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7710, time: 2010-08-26 22.58.02, message:
ORA-27063: number of bytes read/written is incorrect
BR0976W Database message alert - level: ERROR, line: 7714, time: 2010-08-26 22.58.02, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7717, time: 2010-08-26 22.58.02, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7718, time: 2010-08-26 22.58.02, message:
ORA-27063: number of bytes read/written is incorrect
BR0976W Database message alert - level: ERROR, line: 7722, time: 2010-08-26 22.58.02, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7734, time: 2010-08-26 22.59.02, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 69633 (blocksize=512)
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 69633 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7735, time: 2010-08-26 22.59.02, message:
ORA-27063: number of bytes read/written is incorrect
BR0976W Database message alert - level: ERROR, line: 7739, time: 2010-08-26 22.59.02, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 69633 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7742, time: 2010-08-26 22.59.02, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 69633 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7743, time: 2010-08-26 22.59.02, message:
ORA-27063: number of bytes read/written is incorrect
BR0976W Database message alert - level: ERROR, line: 7747, time: 2010-08-26 22.59.02, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 69633 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7757, time: 2010-08-26 22.59.04, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7758, time: 2010-08-26 22.59.04, message:
ORA-27063: number of bytes read/written is incorrect
BR0976W Database message alert - level: ERROR, line: 7762, time: 2010-08-26 22.59.04, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7765, time: 2010-08-26 22.59.04, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7766, time: 2010-08-26 22.59.04, message:
ORA-27063: number of bytes read/written is incorrect
BR0976W Database message alert - level: ERROR, line: 7770, time: 2010-08-26 22.59.04, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7780, time: 2010-08-26 23.00.02, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 63489 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7781, time: 2010-08-26 23.00.02, message:
ORA-27063: number of bytes read/written is incorrect
BR0976W Database message alert - level: ERROR, line: 7785, time: 2010-08-26 23.00.02, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 63489 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7798, time: 2010-08-26 23.00.10, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 77825 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7799, time: 2010-08-26 23.00.10, message:
ORA-27063: number of bytes read/written is incorrect
BR0976W Database message alert - level: ERROR, line: 7803, time: 2010-08-26 23.00.10, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 77825 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7811, time: 2010-08-26 23.01.02, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 63489 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7812, time: 2010-08-26 23.01.02, message:
ORA-27063: number of bytes read/written is incorrect
BR0976W Database message alert - level: ERROR, line: 7816, time: 2010-08-26 23.01.02, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 63489 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7826, time: 2010-08-26 23.02.03, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 63489 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7827, time: 2010-08-26 23.02.03, message:
ORA-27063: number of bytes read/written is incorrect
BR0976W Database message alert - level: ERROR, line: 7831, time: 2010-08-26 23.02.03, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 63489 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7839, time: 2010-08-26 23.03.03, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 77825 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7840, time: 2010-08-26 23.03.03, message:
ORA-27063: number of bytes read/written is incorrect
BR0976W Database message alert - level: ERROR, line: 7844, time: 2010-08-26 23.03.03, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 77825 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7857, time: 2010-08-26 23.03.42, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7858, time: 2010-08-26 23.03.42, message:
ORA-27063: number of bytes read/written is incorrect
BR0976W Database message alert - level: ERROR, line: 7862, time: 2010-08-26 23.03.42, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7870, time: 2010-08-26 23.04.03, message:
ORA-19502: write error on file "/oracle/IRQ/oraarch/IRQarch1_28567_661029934.dbf", blockno 65537 (blocksize=512)
BR0976W Database message alert - level: ERROR, line: 7871, time: 2010-08-26 23.04.03, message:
ORA-27063: number of bytes read/written is incorrect
BR0976W Database message alert - level: ERROR, line: 7875, time: 2010-08-26 23.04.03, message:
BR0978W Database profile alert - level: WARNING, parameter: LOG_BUFFER, value: 14251008 (>< 4096,512 KB)
BR0978W Database profile alert - level: WARNING, parameter: OPTIMIZER_FEATURES_ENABLE, value: 10.2.0.1 (set in parameter file)
BR0978W Database profile alert - level: WARNING, parameter: PARALLEL_EXECUTION_MESSAGE_SIZE, value: 2152 (>< 16384,4096)
BR0978W Database profile alert - level: ERROR, parameter: QUERY_REWRITE_ENABLED, value: TRUE (<> FALSE)
BR0978W Database profile alert - level: ERROR, parameter: REPLICATION_DEPENDENCY_TRACKING, value: TRUE (<> FALSE)
BR0978W Database profile alert - level: WARNING, parameter: STAR_TRANSFORMATION_ENABLED, value: FALSE (<> TRUE)
BR0978W Database profile alert - level: WARNING, parameter: STATISTICS_LEVEL, value: TYPICAL (set in parameter file)
What are these and how to rectify these?
Regards,
PriyaHi Priya,
When you perform database check either using brtools or in tx code db13, SAP will check the health of database system by reading the content of alert_<SID>.log file located in /oracle/<SID>/saptrace/background. Also it checks the contents of database parameters as per the threshold configuration in tx code db17.
The content of oracle alert log file showed that it cannot write archive log file.. Please see the content of alert_<SID>.log file and correct the archive log error creation. The error indicates that either disk block is corrupted or damaged.
As seen in the error message the error message was created in the month of Aug 2010 and appended in the alert_IRQ.log file located in /oracle/IRQ/saptrace/background.If the error is not present now and if you want to perform database check, then delete old contents from the first line to till last month in alert_IRQ.log file using operating system. Then save the file and Then perform database check again.
Please make sure you must monitor database check daily and ensure that if the error occurs for writing archive log file, it is dangerous as archive will stuck and the whole operation hangs.
The message below is for warning and this can be ignored and this is becasue of threshold configuration. You may change the threshold configuration in tx code db17.
However warning " WARNING, parameter: LOG_BUFFER, value: 14251008 (>< 4096,512 KB) BR0978W Database profile alert - level: WARNING, parameter: OPTIMIZER_FEATURES_ENABLE, value: 10.2.0.1 (set in parameter file) BR0978W Database profile alert - level: WARNING, parameter: PARALLEL_EXECUTION_MESSAGE_SIZE, value: 2152 (>< 16384,4096) BR0978W Database profile alert - level: ERROR, parameter: QUERY_REWRITE_ENABLED, value: TRUE (<> FALSE) BR0978W Database profile alert - level: ERROR, parameter: REPLICATION_DEPENDENCY_TRACKING, value: TRUE ( FALSE) BR0978W Database profile alert - level: WARNING, parameter: STAR_TRANSFORMATION_ENABLED, value: FALSE ( TRUE) BR0978W Database profile alert - level: WARNING, parameter" - is for warning only it could be bug problems. SO there is no need to correct the problem.
Hope this helps you.
Thanks and Regards
apr -
SAP database check finished with warning
Hello All,
In sapcheck folder latest .chk file finished with following warnings
BR0280I BRCONNECT time stamp: 2009-04-01 10.30.50
BR0972I Checking database operations...
BR0973W Database operation alert - level: WARNING, operation: cdzsjafp.log, time: 2009-01-17 05.13.45, condition: Last 'log' operation failed with rc = 3
Kindly help me resolve the issue.
Regards
Mohsin>
mohsin m wrote:
> Hello All,
>
> In sapcheck folder latest .chk file finished with following warnings
>
> BR0280I BRCONNECT time stamp: 2009-04-01 10.30.50
> BR0972I Checking database operations...
> BR0973W Database operation alert - level: WARNING, operation: cdzsjafp.log, time: 2009-01-17 05.13.45, condition: Last 'log' operation failed with rc = 3
>
> Kindly help me resolve the issue.
>
> Regards
> Mohsin
Hello,
The warning occurs because the database check looks for the logs of all old operations that ended with an error. The text "Last 'log' operation" means: an operation log with the extension ".log"was found for an action that ended with the (error) status RC = 3.
Since the log referred to is old (January 17), you can get rid of it by running:
brconnect -u / -c force -f cleanup -m 60
(60 is the minimum age of the logs to clean up; adapt this value to your requirements)
Also, it is a good idea to schedule the action "Cleanup logs" periodically via DB13.
Regards,
Mark
Maybe you are looking for
-
User exit ZXPADU02 - evaluating SY-UCOMM
Hello everyone, I am trying to display an error message whenever someone tries to create a new work schedule rule (P0007-SCHKZ) in infotype 7. However, the error message should just come up when the user is trying to save his data. I am using user ex
-
Automatic assignment of Partner Function (Dealer) based on Postal Code?
Hi Experts, We are realizing a project in the Bathroom-Product Industry. Responsible for the service to the end-clients are authorized dealer. When creating a service ticket the responsible dealer has to be assigned automatically to the ticket on the
-
Can anyone explain me the lovrelation function
Hi to all, Can anyone explain me the lovrelation function. I tried this but i got an error "The LOV relation that you are trying to add is invalid." This is lov relation code, lov.addLovRelations(pagecontext, " ", // base pageitem " ", //lov item LOV
-
iphone 3 wont restore updated itunes and tried it again but it still wont restore
-
When ever I try to use L&T it opens and two seconds after I get the color will of death and FCP stops responding. Any suggestions? Thanks.