Database hanging 10g R2

I am using 10g R2 on IBM-AIX (AIX 5.3) server. Yesterday and today morning I faced one issue of hanging of the database. Users were not able to login (even sys was not able to login). Nothing was there in the alert log. When I checked system statstics using topas command, one disk (on which half of the datafiles reside) was 100% busy in IO. (There is another small database on the same disk also, but that runs fine, though not much work is done on that). There was one process that was consuming about 10-12% of CPU. As I had no login, so was not able to see, what exactly was going on. Finally I killed that resource consuming process (with kill -9) which brought the IO to normal. After that when I ran SQLPLUS on the server (through a ssh session) it seemed like hung, but then I pressed Ctrl + C and it was back to SQL prompt. From there I could shutdown the database and then restart. For the time being it is running fine. What could be the reasons for this behaviour and any hints/tips for troubleshooting this scenario (if happens again)
Thanks
Sidhu

Collect the information from awr and ash (Active Session History) and see what cause the issues.
Stop guessing work. Oracle records everything into ASH and AWR.
I would also be intrested knowing the wait events.
What was the cpu cosumption at that time?
How about listeners?
10g has problems with dynamic listener where you will see couple of listeners running on the OS. You need to kill the dynamic one.
Jaffar

Similar Messages

Oracle 10g Database Hanging twice a day

My database server has 10g with MS 2003 server as OS.
Twice a day the database hangs and does disconnects all the users from local and remote locations.
Current SYSTEM tablespace has a size of 470 MB and is 98.86 in use, when I try to add another datafile as 'SYSTEM02.DBF' in the same path where other system data files are, I kept this operation running during weekends but datafile was not added.
Has it anything to do with the MS 2003 server no. of users.
Any other suggestions for SYSTEM Tablespace to be free.
Please reply.
Thanks
Ajaz Ahmed

Hi friends / sameer,
Sorry for the delay. Here is the attached alert.log file Since the data from foxpro was loaded into oracle on to oracle 10 g from 7th may the problem of database hanging started from the next day. I joined the organization on 22nd july.
Current SYSTEM tablespace has a size of 470 MB and is 98.86 in use, when I try to add another datafile as 'SYSTEM02.DBF' in the same path where other system data file is, it does not add. I kept this operation running during weekends but datafile was not added.
Has it anything to do with the MS 2003 server no. of users.
Any other suggestions for SYSTEM Tablespace to be free.
If you can get me your mail id then I can send the
attachment of alert.log file as [email protected] bounces back.
Thanks
Ajaz Ahmed

Shutting down database hangs

Dear Gurus,
I m facing a database hang issue while performing the scheduled offline backup.I m able to take the online backup.When the backup starts , the database starts to shutdown.When checked in the log of backup it shows in tail as shutting down database.When checked for user trace , it shows message as "Attempting to kill pid xxxxxxx" and keeps on retrying for n no. of times.Then I have to manually kill the backup and restart the application.Then again try for an offline backup.This time it happens smoothly.This activity we did for couple of weeks .But now from past 3 days even after restarting the backup, it goes to hang mode.In other words unable to perform the backup activity.
The message had been raised to SAP from almost 15 days at very high.They every time ask the logs , and say that the data in log is nt providing much info for analysing the issue or cause of hang.Also enabled the traces of 10400 for trace level 1 ,10 some more traces also.But still the output is not helping even them to analyse the root cause.
Its my observation that this issue is occuring only on ABAP+JAVA systems(CRM &BIW)not in ECC.We are on oracle database 10.2.0.0.4 with latest patch set as suggested by SAP for the same issue.
This issue is h
Please suggest me at the earliest.As need to resolve this at the earliest.
Bye.
Amit

Hi,
No "archive process shutdown avoided" message is there in the log file.
In usertrace i get messages as mentioned below.
bslcrmprddb #more bcp_ora_1257502.trc
Dump file /oracle/BCP/saptrace/usertrace/bcp_ora_1257502.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
ORACLE_HOME = /oracle/BCP/102_64
System name:    AIX
Node name:      bslcrmprddb
Release:        3
Version:        5
Machine:        00C6C4024C00
Instance name: BCP
Redo thread mounted by this instance: 1
Oracle process number: 0
Unix process pid: 1257502, image: oracle@bslcrmprddb
2009-06-05 08:01:36.875
Oracle Instance Startup operation failed. Another process may be attempting to startup or shutdown
Failed to acquire instance startup/shutdown serialization primitive
bslcrmprddb #more bcp_ora_2453676.trc
Dump file /oracle/BCP/saptrace/usertrace/bcp_ora_2453676.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
ORACLE_HOME = /oracle/BCP/102_64
System name:    AIX
Node name:      bslcrmprddb
Release:        3
Version:        5
Machine:        00C6C4024C00
Instance name: BCP
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Unix process pid: 2453676, image: oracle@bslcrmprddb
2009-06-06 07:04:22.494
Dynamic strand is set to TRUE
Running with 2 shared and 88 private strand(s). Zero-copy redo is FALSE
bslcrmprddb #more bcp_ora_1495266.trc
Dump file /oracle/BCP/saptrace/usertrace/bcp_ora_1495266.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
ORACLE_HOME = /oracle/BCP/102_64
System name:    AIX
Node name:      bslcrmprddb
Release:        3
Version:        5
Machine:        00C6C4024C00
Instance name: BCP
Redo thread mounted by this instance: 1
Oracle process number: 213
Unix process pid: 1495266, image: oracle@bslcrmprddb (TNS V1-V3)
ACTION NAME:() 2009-06-06 03:00:22.223
MODULE NAME:(sqlplus@bslcrmprddb (TNS V1-V3)) 2009-06-06 03:00:22.223
SERVICE NAME:(SYS$USERS) 2009-06-06 03:00:22.223
SESSION ID:(517.13229) 2009-06-06 03:00:22.223
ksukia: Starting kill, force = 0
ksukia: killed 274 out of 274 processes.
ksukia: Starting kill, force = 0
ksukia: killed 0 out of 2 processes.
ksukia: Starting kill, force = 0
ksukia: killed 0 out of 1 processes.
ksukia: Starting kill, force = 0
ksukia: killed 0 out of 1 processes.
ksukia: Starting kill, force = 0
Please suggest.
Regards,
Amit

Database Hanging

Hi,
I have Oracle database 10g my database is hanging and i want to check what locks occur on which table how can i work on this database hanging process.Kindly help...because i am new for this i need good procedure to face this problem..

If db hangs there could be a lot of possibilities..
eg. no more space for archive log or datafiles
Locks on table are different. You can look on alertlog and start investigating..

Facing Parse Errors after upgrading database from 10g to 11g

Hi,
We are facing parse errors in the SQL's after upgrading database from 10g to 11g.
Kindly look into below parse errors.
********************************** Parse Error *****************************************************
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Tue Aug 13 14:13:10 2013
kksfbc 16173533: parse err=942 hd=3c387c4028 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
Select feature from toad.toad_restrictions where user_name=USER or user_name in ( select ROLE from sys.session_roles)
kksfbc 16173533: parse err=942 hd=3c97d83648 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT password
FROM SYS.USER$
WHERE 0=1
kksfbc 16173533: parse err=6550 hd=35185e4278 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object      line object
handle    number name
319e277050        30 anonymous block
319e277050        57 anonymous block
PARSE ERROR: ospid=29813, error=6550 for statement:
BEGIN sys.dbms_profiler."146775420110782746251362632012"; END;
kksfbc 16173533: parse err=942 hd=3c142d8600 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object      line object
handle    number name
319e277050        67 anonymous block
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT 1 FROM plsql_profiler_data WHERE 0 = 1
Please help.
Regards
Suresh

Hi Suresh,
Apologies for misunderstanding..
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Assuming you see the above error message in the alert log file, which was your original post, follow the below steps:
1 Get the 'ospid' value from the error
2. Issue the below command:
SQL> select request_id,ORACLE_PROCESS_ID
2 from fnd_concurrent_requests
3 where request_id = 15598;
3. After obtaining the request_id
4, Query it from the front-end using SYSADMIN responsibility
Hopefully this should get you the respective concurrent report/program.
Thanks &
Best Regards,

TIP 04: Duplicating a Database in 10g by Joel Pèrez

Hi OTN Readers!
Everyday I get connection on Internet and one of the first issues that
I do is to open the OTN main page to look for any new article or any
new news about the Oracle Technology. After I open the main page of
OTN Forums and I check what answers I can write to help some people
to work with the Oracle Technology and I decided to begin to write some
threads to help DBAs and Developers to learn the new features of 10g.
I hope you can take advantage of them which will be published here in
this forum. For any comment you can write to me directly to : [email protected] . Apart from your comments you can suggest to me any topic to write an article like this.
Please do not replay this thread, if you have any question related to
this I recommend you to open a new post. Thanks!
The tip of this thread is: Duplicating a Database in 10g
Joel Pérez
http://otn.oracle.com/experts

Step 6: Editing the file generated
The file generated is going to be like this:
Dump file f:\ora9i\admin\copy1\udump\copy1_ora_912.trc
Thu May 20 16:27:37 2004
ORACLE V9.2.0.1.0 - Production vsnsta=0
vsnsql=12 vsnxtr=3
Windows 2000 Version 5.0 Service Pack 4, CPU type 586
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Windows 2000 Version 5.0 Service Pack 4, CPU type 586
Instance name: copy1
Redo thread mounted by this instance: 1
Oracle process number: 10
Windows thread id: 912, image: ORACLE.EXE
*** SESSION ID:(9.38) 2004-05-20 16:27:37.000
*** 2004-05-20 16:27:37.000
# The following are current System-scope REDO Log Archival related
# parameters and can be included in the database initialization file.
# LOG_ARCHIVE_DEST=''
# LOG_ARCHIVE_DUPLEX_DEST=''
# LOG_ARCHIVE_FORMAT=ARC%S.%T
# REMOTE_ARCHIVE_ENABLE=TRUE
# LOG_ARCHIVE_MAX_PROCESSES=2
# STANDBY_FILE_MANAGEMENT=MANUAL
# STANDBY_ARCHIVE_DEST=%ORACLE_HOME%\RDBMS
# FAL_CLIENT=''
# FAL_SERVER=''
# LOG_ARCHIVE_DEST_1='LOCATION=f:\ora9i\RDBMS'
# LOG_ARCHIVE_DEST_1='MANDATORY NOREOPEN NODELAY'
# LOG_ARCHIVE_DEST_1='ARCH NOAFFIRM SYNC'
# LOG_ARCHIVE_DEST_1='NOREGISTER NOALTERNATE NODEPENDENCY'
# LOG_ARCHIVE_DEST_1='NOMAX_FAILURE NOQUOTA_SIZE NOQUOTA_USED'
# LOG_ARCHIVE_DEST_STATE_1=ENABLE
# Below are two sets of SQL statements, each of which creates a new
# control file and uses it to open the database. The first set opens
# the database with the NORESETLOGS option and should be used only if
# the current versions of all online logs are available. The second
# set opens the database with the RESETLOGS option and should be used
# if online logs are unavailable.
# The appropriate set of statements can be copied from the trace into
# a script file, edited as necessary, and executed when there is a
# need to re-create the control file.
#     Set #1. NORESETLOGS case
# The following commands will create a new control file and use it
# to open the database.
# Data used by the recovery manager will be lost. Additional logs may
# be required for media recovery of offline data files. Use this
# only if the current version of all online logs are available.
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "COPY1" NORESETLOGS NOARCHIVELOG
-- SET STANDBY TO MAXIMIZE PERFORMANCE
    MAXLOGFILES 50
    MAXLOGMEMBERS 5
    MAXDATAFILES 100
    MAXINSTANCES 1
    MAXLOGHISTORY 226
LOGFILE
GROUP 1 'C:\COPY1\COPY1\REDO01.LOG' SIZE 10M,
GROUP 2 'C:\COPY1\COPY1\REDO02.LOG' SIZE 10M,
GROUP 3 'C:\COPY1\COPY1\REDO03.LOG' SIZE 10M
-- STANDBY LOGFILE
DATAFILE
'C:\COPY1\COPY1\SYSTEM01.DBF',
'C:\COPY1\COPY1\UNDOTBS01.DBF',
'C:\COPY1\COPY1\CWMLITE01.DBF',
'C:\COPY1\COPY1\DRSYS01.DBF',
'C:\COPY1\COPY1\EXAMPLE01.DBF',
'C:\COPY1\COPY1\INDX01.DBF',
'C:\COPY1\COPY1\ODM01.DBF',
'C:\COPY1\COPY1\TOOLS01.DBF',
'C:\COPY1\COPY1\USERS01.DBF',
'C:\COPY1\COPY1\XDB01.DBF'
CHARACTER SET WE8ISO8859P1
# Recovery is required if any of the datafiles are restored backups,
# or if the last shutdown was not normal or immediate.
RECOVER DATABASE
# Database can now be opened normally.
ALTER DATABASE OPEN;
# Commands to add tempfiles to temporary tablespaces.
# Online tempfiles have complete space information.
# Other tempfiles may require adjustment.
ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\COPY1\COPY1\TEMP01.DBF'
     SIZE 41943040 REUSE AUTOEXTEND ON NEXT 655360 MAXSIZE 32767M;
# End of tempfile additions.
#     Set #2. RESETLOGS case
# The following commands will create a new control file and use it
# to open the database.
# The contents of online logs will be lost and all backups will
# be invalidated. Use this only if online logs are damaged.
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "COPY1" RESETLOGS NOARCHIVELOG
-- SET STANDBY TO MAXIMIZE PERFORMANCE
    MAXLOGFILES 50
    MAXLOGMEMBERS 5
    MAXDATAFILES 100
    MAXINSTANCES 1
    MAXLOGHISTORY 226
LOGFILE
GROUP 1 'C:\COPY1\COPY1\REDO01.LOG' SIZE 10M,
GROUP 2 'C:\COPY1\COPY1\REDO02.LOG' SIZE 10M,
GROUP 3 'C:\COPY1\COPY1\REDO03.LOG' SIZE 10M
-- STANDBY LOGFILE
DATAFILE
'C:\COPY1\COPY1\SYSTEM01.DBF',
'C:\COPY1\COPY1\UNDOTBS01.DBF',
'C:\COPY1\COPY1\CWMLITE01.DBF',
'C:\COPY1\COPY1\DRSYS01.DBF',
'C:\COPY1\COPY1\EXAMPLE01.DBF',
'C:\COPY1\COPY1\INDX01.DBF',
'C:\COPY1\COPY1\ODM01.DBF',
'C:\COPY1\COPY1\TOOLS01.DBF',
'C:\COPY1\COPY1\USERS01.DBF',
'C:\COPY1\COPY1\XDB01.DBF'
CHARACTER SET WE8ISO8859P1
# Recovery is required if any of the datafiles are restored backups,
# or if the last shutdown was not normal or immediate.
RECOVER DATABASE USING BACKUP CONTROLFILE
# Database can now be opened zeroing the online logs.
ALTER DATABASE OPEN RESETLOGS;
# Commands to add tempfiles to temporary tablespaces.
# Online tempfiles have complete space information.
# Other tempfiles may require adjustment.
ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\COPY1\COPY1\TEMP01.DBF'
     SIZE 41943040 REUSE AUTOEXTEND ON NEXT 655360 MAXSIZE 32767M;
# End of tempfile additions.
#As you can see, you have there different ways to recreate the controlfile. In Our case, We are going to recreate the controlfiles so:
STARTUP NOMOUNT
CREATE CONTROLFILE SET DATABASE "COPY2" RESETLOGS NOARCHIVELOG
-- SET STANDBY TO MAXIMIZE PERFORMANCE
MAXLOGFILES 50
MAXLOGMEMBERS 5
MAXDATAFILES 100
MAXINSTANCES 1
MAXLOGHISTORY 226
LOGFILE
GROUP 1 'C:\COPY2\COPY2\REDO01.LOG' SIZE 10M,
GROUP 2 'C:\COPY2\COPY2\REDO02.LOG' SIZE 10M,
GROUP 3 'C:\COPY2\COPY2\REDO03.LOG' SIZE 10M
-- STANDBY LOGFILE
DATAFILE
'C:\COPY2\COPY2\SYSTEM01.DBF',
'C:\COPY2\COPY2\UNDOTBS01.DBF',
'C:\COPY2\COPY2\CWMLITE01.DBF',
'C:\COPY2\COPY2\DRSYS01.DBF',
'C:\COPY2\COPY2\EXAMPLE01.DBF',
'C:\COPY2\COPY2\INDX01.DBF',
'C:\COPY2\COPY2\ODM01.DBF',
'C:\COPY2\COPY2\TOOLS01.DBF',
'C:\COPY2\COPY2\USERS01.DBF',
'C:\COPY2\COPY2\XDB01.DBF'
CHARACTER SET WE8ISO8859P1
Note: two important issues to denote in the sentence above is the word "SET" instead of "REUSE" and the controlfiles must be recreated in RESETLOG mode because the database must be opened in RESETLOG mode.
If you use the word "REUSE" instead of "SET" the opening of the database is going to request recovery of the datafile of the tablespace system.
So, apply this to recreate the controlfiles:
- Start the service in windows for the database COPY2
- Get connection through SQL*Plus as system
- Shut down the database with shutdown abort
- Start the database up in nomount stage
- apply the sentence to recreate the controlfile.
C:\>SET ORACLE_SID=COPY2
C:\>sqlplus /nolog
SQL*Plus: Release 9.2.0.1.0 - Production on Thu May 20 16:46:49 2004
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> conn sys as sysdba
Enter password:
Connected.
SQL>
SQL> shutdown abort
ORACLE instance shut down.
SQL>
SQL>
SQL> startup nomount
ORACLE instance started.
Total System Global Area 135338868 bytes
Fixed Size                   453492 bytes
Variable Size             109051904 bytes
Database Buffers           25165824 bytes
Redo Buffers                 667648 bytes
SQL>
SQL>
SQL> CREATE CONTROLFILE SET DATABASE "COPY2" RESETLOGS NOARCHIVELOG
2 -- SET STANDBY TO MAXIMIZE PERFORMANCE
3      MAXLOGFILES 50
4      MAXLOGMEMBERS 5
5      MAXDATAFILES 100
6      MAXINSTANCES 1
7      MAXLOGHISTORY 226
8 LOGFILE
9    GROUP 1 'F:\COPY2\COPY2\REDO01.LOG' SIZE 10M,
10    GROUP 2 'F:\COPY2\COPY2\REDO02.LOG' SIZE 10M,
11    GROUP 3 'F:\COPY2\COPY2\REDO03.LOG' SIZE 10M
12 -- STANDBY LOGFILE
13 DATAFILE
14    'F:\COPY2\COPY2\SYSTEM01.DBF',
15    'F:\COPY2\COPY2\UNDOTBS01.DBF',
16    'F:\COPY2\COPY2\CWMLITE01.DBF',
17    'F:\COPY2\COPY2\DRSYS01.DBF',
18    'F:\COPY2\COPY2\EXAMPLE01.DBF',
19    'F:\COPY2\COPY2\INDX01.DBF',
20    'F:\COPY2\COPY2\ODM01.DBF',
21    'F:\COPY2\COPY2\TOOLS01.DBF',
22    'F:\COPY2\COPY2\USERS01.DBF',
23    'F:\COPY2\COPY2\XDB01.DBF'
24 CHARACTER SET WE8ISO8859P1
25 ;
Control file created.
SQL>Joel Pérez
http://otn.oracle.com/experts

How to create database in 10g xe

How to create database in 10g xe? could you please direct me to which documentation in 10g xe website? is it possible to create the db from the web console? if so, how? I can't seem to find a way to do it? Thanks

You cannot: there can only be one XE database per host and it's created when you install Oracle XE.

Logical Standby Database with 10g+ASM on both sides??

Hi out there,
is there a known way to establish a logical standby database on 10g, if both
sides are running with an ASM setup?
I've tried to create one out of a physical standby database (which is set up
and running w/o any problems), like a book suggested me to do.
The procedure was:
1. switch on supplemental logging
2. prepare initiation parameters (for archive logging etc.) on both sides for
logical stb.
3. shut down the phyiscal standby
4. alter database create logical standby controlfile as '<path>'; on the
primary, transfer the controlfile to the standby db. Here I had to use RMAN
to copy the controlfile into the ASM System, and modify the initfile/spfile
in order to use the controlfile. No problem so far.
5. mount the standby database, alter database recover managed standby database
disconnect; -> At this point, the alert log complained about non-available
datafiles.
6. alter database activate standby database; --> fails ("needs recovery") due
to last point.
The trouble is, the controlfile created at point 4 cointains wrong paths to
the datafiles. Since I can not have the same disk group name on the standby
system, and since ASM renames the stored datafiles by its own, the complaints
of point 5 are comprehensible, but nevertheless annoying.
I tried to backup a controlfile to trace and change the paths, but at after
mounting the standby with this controlfile and proceeding at point 5, the
system says "<path> is not a standby controlfile"
Is there a different way of creating a "Logical Standby Database with 10g+ASM
on both sides"? Metalink said nothing about LogStby and ASM.
Best regards and thanks in advance,
Martin

I'm not sure if this will work but try:
1. create trace control file (you did it)
2. change paths (you did it)
3. recrate control file (you did it)
... there was error occured during mount before
so mount database (not as standby)
4. create standby control file (from recreated control file)
5. shutdown instance, replace control file with new standby control file or replace the control filename in parameter file.
6. mount as standby
What happend?
Update: Tested on my side and it has worked fine... How about you?
Message was edited by:
Ivan Kartik

Oracle database XE 10g on Windows XP Professional SP2

I'm installing Oracle Database XE 10g on my computer but when i launch the exe I receive the message ' error reading set up inizialization file '.
help me please

hi
can u plz describe little bit more.

Upgrading database in 10g with 9i cold backup.

Hello Experts,
I am upgrading my database in 10g with cold backup of 9i.
I am getting this error
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: 'D:\9i_DB\SYSTEM01.DBF'
could you people help me
Thanks in Advance....

I would suggest you need to start the db in 9i first .. check the db is up and running .. then go for Manuall upgrade process to10g
--Girish

Physical Standby database Oracle 10g Standard Edition

Hello,
I open a new question about testing a standby database a because of this:
I realize that my standby database is 10g Standard and not Enterprise and not 11g.
Because for testing we plan to modify data on Standby, we are looking for some way to restore Standby to the point before testing.
So, I can't use Flashback Recovery Area for restoring my database to a certain point after testing.
In this scenario, the only way that I think is:
On Standby
- Shutdown database
- Copy by O/S all datafiles, temp files, control files and redo logs. That will be my backup before testing.
- Open database, test and modify data
- When test is finished, shutdown database
- Copy and replace by O/S all datafiles, temp files, control files and redo logs from backup place
- Open database as standby and apply all archived redo logs needed.
Would be it work without problem or should I copy other files?

user521219 wrote:
Hello,
I open a new question about testing a standby database a because of this:
I realize that my standby database is 10g Standard and not Enterprise and not 11g.
Because for testing we plan to modify data on Standby, we are looking for some way to restore Standby to the point before testing.
So, I can't use Flashback Recovery Area for restoring my database to a certain point after testing.
In this scenario, the only way that I think is:
On Standby
- Shutdown database
- Copy by O/S all datafiles, temp files, control files and redo logs. That will be my backup before testing.
- Open database, test and modify data
- When test is finished, shutdown database
- Copy and replace by O/S all datafiles, temp files, control files and redo logs from backup place
- Open database as standby and apply all archived redo logs needed.
Would be it work without problem or should I copy other files?yes, It will work.
it comes under Refresh of database, use --> cleanup --> restore.
If its enterprise edition , you can use procedure mentioned in this note How To Open Physical Standby For Read Write Testing and Flashback [ID 805438.1]
Edited by: CKPT on Jul 5, 2012 11:01 PM

Oracle 8i database hangs for the same amount during JDBC calls.

Hi all,
I have a Oracle 8i database on solaris. The database hangs for exactly 61 seconds for a random jdbc call from my Java application, i mean there is no particular pattern or a JDBC call for which the database hangs. If i choose to wait for 61 seconds it returns the results from the database but if i try to access the database with another query(SQL Plus) the first query starts executing immediately. Is that a database configuration problem or some thing else.
And i also get some exceptions occasionally( Maximum Open Cursors exception). Are these two related?
Any feedback is appreciated.
Thanks
Hugo Victor

I have uninstalled Oracle 8i.
Removed all the services from Windows services by deleting corresponding registry entries and deleted the Oracle folder.
I have reinstalled Oracle 8i, this time i changed the name of global database to oracledb.
I channged the tnsnames.ora file from DevSuite appropriately as:
# tnsnames.ora Network Configuration File: C:\DevSuiteHome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = mscserver)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORACLEDB)
Still it can't login using scott/tiger authentication.
What may be the problem? Please help.
-Sameer

Available Now: Oracle Database Lite 10g Release 1

The Oracle Database Lite development team is pleased to announce the availability of Oracle Database Lite 10g (10.0.0.0.0) for Windows 2000/XP, Solaris 2.6, 2.7, 2.8, and Red Hat Enterprise Linux AS/ES 2.1/3.0 platforms.
The Windows release is currently available from OTN at:
http://www.oracle.com/technology/software/products/lite/index.html
Oracle Database Lite 10g is a complete and integrated solution for rapid development and deployment of high impact, mission vital applications for mobile and lightweight embedded environments. Oracle Database Lite is an extension to Oracle Database 10g for enterprises wanting to increase productivity, reduce operational costs, and improve customer satisfaction.
Oracle Database Lite uses data synchronization to reliably and securely exchange data between a corporate Oracle Database and mobile workers. Oracle Database Lite also allows companies to deploy and manage users, mobile applications and devices from a remote central location. Oracle Database Lite provides the necessary framework enterprise customers need to extend their enterprise applications and data to the most popular mobile platforms: Palm OS, Linux, Microsoft Windows CE/PPC, and Microsoft Windows NT/2000/XP/UNIX.
The following is a partial list of new features for Oracle Database Lite 10g that will make your mobile deployment easier to manage, use, and develop. A complete list will be available for download/viewing soon.
Device Management
As the number of mobile devices in an enterprise increases, it becomes more important to have complete control of the devices. Oracle Database Lite Device Management is a complete infrastructure to monitor and manage Oracle Database Lite assets such as database files, software libraries, data, and application files on remote devices. Device management decreases the total cost of ownership and protects an enterprises intellectual property.
Single Oracle Lite Binary
The Oracle Database Lite 10g release contains a single set of Oracle Lite database kernel binaries for all languages, removing the necessity of having different binaries for each of the following languages: Korean, Traditional Chinese, simplified Chinese, Japanese, and US/European languages.
Shared Map
The shared map function greatly improves performance by reducing sync processing timeand enhances the scalability of shared publication items. Shared maps allow users to share record state information and reduce the size of the resulting replication map tables.
Offline Instantiation
Offline instantiation enables quick and easy setup of mobile devices for business applications. Mobile administrators are able to prepare, in batch mode, a client package, which includes the mobile client software and initial data for every mobile user. This procedure helps users avoid an expensive online synchronization processes as part of the first time mobile client setup procedure.
Synchronization Manager
The Synchronization Manager is a complete, web-based enterprise management application to manage and monitor synchronization. The Synchronization Manager allows administrators to manage the synchronization service, monitor and analyze sync performance, administer the configuration, trace synchronization history, display and browse synchronization publication and subscription information, and monitor MGP (Message Generator and Processor) performance.
Oracle Application Server Support
The Oracle Database Lite 10g Mobile Server now runs as a web application on Oracle Containers for Java (OC4J) the runtime of Oracle Application Server. If Oracle
Database Lite 10g is deployed in standalone mode, an embedded version of OC4J will be installed and used. Oracle Database Lite may also be installed against an existing instance of Oracle Application Server.
Seamless upgrade from Oracle9 i Lite 5.0.2
The Oracle Database Lite 10g Upgrade Assistant allows customers to easily upgrade from existing Oracle9 i Lite 5.0.2 installations. The Upgrade Assistant automatically converts existing application definitions to the new format, and copies all relevant files to the new installation. As many customers have deployed mission critical systems using Oracle9i Lite technology, the Upgrade Assistant has been designed to minimize system downtime.
Download
Oracle Database Lite 10g (10.0.0.0.0) for Windows can now be downloaded from the following location.
http://www.oracle.com/technology/software/products/lite/index.html

I am using Oracle 10g lite. Do you know if it supports silent installation.

UPGRADING DATABASE TO 10G R2

Hi All,
I had installed 11.5.10.2 on IBM-AIX 5L V5.3(64 bit).
As by default my current database Oracle9i Enterprise Edition Release 9.2.0.6.0.
I need to upgrade my database to 10g R2.
What steps I need to follow and are there any changes that need to be done from Application Side.
I had made my installation in this scenario( multinode)
DB-CM-ADMIN -- 1st Node
FORM-WEB -- 2nd Node
Application file system sharing -- NO
Please advice.

What steps I need to follow and are there any changes
that need to be done from Application Side.Check Note: 362203.1 - Oracle Applications Release 11i with Oracle 10g Release 2 (10.2.0)
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=362203.1
In addition, you need to apply Patch 5871314 and Patch 5892355 (To avoid ORA-00600: internal error code), these two patches are available on the following platforms:
- Solaris Operating System (SPARC 64-bit)
- AIX5L Based Systems (64-bit)
- Linux x86-64 (AMD64/EM64T)
- HP-UX PA-RISC (64-bit)
Note: 412271.1 - ORA-600 [22635] and ORA-600 [KOKEIIX1] Reported While Upgrading Or Patching Databases To 10.2.0.3
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=412271.1

Opatch Failed (Oracle Database Lite 10g 10.3.0.3)

Hi all,
I am Using Oracle Database 10g R2 10.2.0.4.0 and Oracle Database Lite 10g R3 10.3.0.3 On windows 2003 Server SP2 32 Bit. While Applying OPatch in my Lite database i got this error message and the Opatch Code is p12677282_103030_Generic
Please Advice me how to resolve this error message.
Error Message:
Do you want to upgrade the repository(y/n):y
"Upgrading repository for LU"
UpgradeRepoforLU.java:43: cannot access oracle.lite.sync.SiteDef
bad class file: D:\Olite10g_1\mobile\classes\consolidator.jar(oracle/lite/sync/S
iteDef.class)
class file has wrong version 49.0, should be 48.0
Please remove or make sure it appears in the correct subdirectory of the classpa
th.
SiteDef.CONS_SCHEMA=schema;
^
1 error
Could Not Find D:\12677282\oracle\lite\sync\*.class
A duplicate file name exists, or the file
cannot be found.
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/lite/sync/Upgr
adeRepoforLU
"Upgrading repository for bug 9776825"
UpgradeRepoforbug9776825.java:32: cannot access oracle.lite.sync.ConsPLSQL
bad class file: D:\Olite10g_1\mobile\classes\consolidator.jar(oracle/lite/sync/C
onsPLSQL.class)
class file has wrong version 49.0, should be 48.0
Please remove or make sure it appears in the correct subdirectory of the classpa
th.
stat.executeUpdate(oracle.lite.sync.ConsPLSQL.DEFAULT_PUB_QPKG_B
^
1 error
Exception in thread "main" java.lang.NoClassDefFoundError: UpgradeRepoforbug9776
825
"Upgrading repository for bug 9957803"
Thanks & Regards,
Shan

btw the latest patch (generic) is 12812978 actually this morning i installed it in 3 develop servers and 2 customers' without any issue (win 2003 server pcs)
anw in your case it seems that something possibly was not installed successfully.
1)press the close(x) button once on the mobileserver , wait some seconds it will say press any key to continue. press it and it will close
2) restart it. if the same warning comes out then try loggin in the http://localhost/webtogo page, is it working?does the server and mgp appear on?(green tick?)
3) if it is, try syncing a device, does it sync ok?
if all is yes then the warning is not important but you should have a look at it. some solutions
1)reinstalling the patch
2)or installing a newer patch,
3)or (i think) you can roll back the patch,
4)or if we are talking for a release server(customer) raise a service request.
5)or wait a little for some other forum users to check this thread and perhaps they have runned into such cases
i would go for number 2

Database hanging 10g R2

Similar Messages

Maybe you are looking for