Database identity...

Hello!
Could any one give me example, how to use a database identity?
Could a database identity be an Integer type?
I'm setting a objectid-class="java.lang.Integer", than refresh a schema,
save an object and get it objectID - myclass-1250 for example...
how i'm could get a 1250 and than call persitManager.getObjectByID(new
Integer(1250))?
Help please!!!

First do -not- set objectid-class to Integer. In fact, with datastore
identity, you should not set that attribute that at all. The rules for object id
classes are quite stringent:
http://solarmetric.com/Software/Documentation/2.4.3/docs/jdo_overview_pc_identity.html#jdo_overview_pc_identity_datastore
With datastore identity, from a portability perspective, you should not be
dealing with the individual primary key components. Instead you should be
using the toString () and pm.newObjectIdInstance () methods to manage your
identity or maintain it in a java.lang.Object reference.
However you can easily create an object id instance using our public
object id constructors, i.e. new com.solarmetric.kodo.util.ObjectIds.Id
(1250, myclass.class);
http://solarmetric.com/Software/Documentation/2.4.3/docs/javadoc/com/solarmetric/kodo/util/ObjectIds.Id.html
However, we do provide
On Mon, 05 May 2003 06:08:44 +0000, Vladimir wrote:
Hello!
Could any one give me example, how to use a database identity?
Could a database identity be an Integer type?
I'm setting a objectid-class="java.lang.Integer", than refresh a schema,
save an object and get it objectID - myclass-1250 for example...
how i'm could get a 1250 and than call persitManager.getObjectByID(new
Integer(1250))?
Help please!!!

Similar Messages

Azure Database Identity Field Jump

I recently moved an on premise database to Azure SQL Database. A table I'm using has an ID column of type bigint set to auto increment from 1. This had been working fine but then the ID jumped from 131 to 10126, then from 10126 to 20126 before
settling back down again and incrementing by 1.
Without going into specifics the application I'm using needs the smallest available primary key so having this jump and essentially losing circa 20000 records isn't good. I can't reseed as SQL Azure doesn't support this so I'm not sure what else to
do other than recreate the table and hope it doesn't happen again.
What I'd like to know is if anyone else has noticed this and if there is a reason for it happening.

I have not seen this issue on any of my databases. The scheme of the database and architecture of the application and whether any triggers or constraints exist would provide further insight.
Is it possible that the application is trying to insert into the table a value that already exists and violates a constraint? Any attempt to insert into a table typically results in the identity column incrementing, whether the interstation is rolled back
due to error or not. Identity columns are guaranteed to increment, but not necessarily gap free.
Edit:
Information from msdn, take note of the last bullet:
http://msdn.microsoft.com/en-us/library/ms186775%28v=sql.110%29.aspx
The identity property on a column does not guarantee the following:
Uniqueness of the value – Uniqueness must be enforced by using a
PRIMARY KEY or UNIQUE constraint or
UNIQUE index.
Consecutive values within a transaction – A transaction inserting multiple rows is not guaranteed to get consecutive values for the rows because other concurrent inserts might occur on the table. If values must be consecutive then the transaction
should use an exclusive lock on the table or use the SERIALIZABLE isolation level.
Consecutive values after server restart or other failures –SQL Server might cache identity values for performance reasons and some of the assigned values can be lost during a database failure or server restart. This can result in gaps in the
identity value upon insert. If gaps are not acceptable then the application should use a sequence generator with the
NOCACHE option or use their own mechanism to generate key values.
Reuse of values – For a given identity property with specific seed/increment, the identity values are not reused by the engine. If a particular insert statement fails or if the insert statement is rolled back then the consumed identity values
are lost and will not be generated again. This can result in gaps when the subsequent identity values are generated.

How to get the user created when I prepare for the BD Identity Manager

Hi I have a query, I need to get a backup database Identity Manager 9.1, I have a problem I do not remember user created to perform the backup, how can you know that I created when I made the installation of Identity Manager, or how can I find

Hi,
You can do this trick:
1) Go to "Deployment Manager" in the Web Console, and open the EXPORT applet
2) Export the User Defined Fields from the USR form. You don't need any dependence for this.
3) Open the generated XML with a text editor.
3) Search for the <SDK_SCHEMA> tag
This tag contains the OIM schema name, wich shoud be your OIM database user.
Hope it helps,

Database can not mount in exchange server 2013 due to Unable to mount database. (hr=0x80004005, ec=-543)

Hello All,
Database can not mount. In this Database domain Administrator mailbox have.
Please suggest. It's very important
The error:
[PS] C:\Windows\system32>Mount-Database -Identity MBX-01 -Force
Confirm
At least one committed transaction log file is missing. Mounting this database will result in data loss. If you can
locate the missing log files, don't continue. Are you sure you want to continue?
[Y] Yes [A] Yes to All [N] No [L] No to All [?] Help (default is "Y"): a
Failed to mount database "MBX-01". Error: An Active Manager operation failed. Error: The database action failed.
Error: Operation failed with message: MapiExceptionJetErrorRequiredLogFilesMissing: Unable to mount database.
(hr=0x80004005, ec=-543)
Diagnostic context:
    Lid: 65256
    Lid: 10722   StoreEc: 0xFFFFFDE1
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 45120   dwParam: 0x51FF5F0
    Lid: 57728   dwParam: 0x51FF68C
    Lid: 46144   dwParam: 0x51FF709
    Lid: 34880   dwParam: 0x51FF709
    Lid: 34760   StoreEc: 0xFFFFFDE1
    Lid: 41344   Guid: 1c2c8cab-ae3f-40c8-8024-ffc776b22360
    Lid: 35200   dwParam: 0x2EFC
    Lid: 46144   dwParam: 0x51FFA55
    Lid: 34880   dwParam: 0x51FFA55
    Lid: 56264   StoreEc: 0x1388
    Lid: 46280   StoreEc: 0xFFFFFDE1
    Lid: 1750    ---- Remote Context End ----
    Lid: 1047    StoreEc: 0xFFFFFDE1 [Database: MBX-01, Server: EG-EXCHG-01.ABC.com]
    + CategoryInfo          : InvalidOperation: (MBX-01:ADObjectId) [Mount-Database], InvalidOperationException
    + FullyQualifiedErrorId : [Server=EG-EXCHG-01,RequestId=ca57e784-43c7-4357-9ab6-08881c87bb77,TimeStamp=9/18/2014 5
   :31:08 AM] [FailureCategory=Cmdlet-InvalidOperationException] 51350054,Microsoft.Exchange.Management.SystemConfigu
rationTasks.MountDatabase
    + PSComputerName        : eg-exchg-01.ABC.com

Hi,
This issue indicate corrupted database or corrupted logs. I suggest you to check and repair the database or check and repair the database log.
1. Check the state of database by following command: eseutil /mh "Path of the database"
Ps: Default path of the database is “C:\Program Files\Microsoft\Exchange Server\V15\Mailbox\Mailbox Database\Mailbox Database.edb”
Default path of the log files is “C:\Program Files\Microsoft\Exchange Server\V15\Mailbox\Mailbox Database\E00”
2. If the state is in clean shutdown, move all the log files from the Transaction logs folder location and then mount the database.
3. If the state is in dirty shutdown, check if the log files that is indicated as Logs required is available or not.
4. You can run Eseutil ml “Path of the log file\e00” to make sure that the log files is required is in a Clean state. This command will help you check the health of all the log files in the location.
5. If the log files are healthy, then try Soft recovery with the command Eseutil /r e00 /l ”Path of log files” /p “Path of the database”
Note:
Make sure you make a backup of the database before attempting any kind of repairs
6. Once the command completes successfully, then mount the database.
7. In case the required log files are not available in a clean state or missing, either restore from a successful back up or perform Hard repair with defragment.
Refer to this file about hard repair:
http://gallery.technet.microsoft.com/Step-by-Step-Exchange-2013-f8bed401
Hope this will be helpful for you

Different runtime in different database

Hi All,
I have one issue which I am doubt about. I have 2 similar user schemas, located in the different database (both are 10G) . I tried to run my SQL query in these 2 user schemas. One of them can run successfully while the another one is hanging there, without knowing when can it be completed. Is there anyone of you have any idea on this? Where can I check in order to rectify the issue?

I have two drivers sitting in two identical looking cars. One is able to start the car and drive off whilst the other is just sitting there. What's the problem?
Answer: It could be one of many things. Lack of petrol, inability of the second person to actually drive. Flat tyres. Elephant standing in front of the car. etc. etc.
So to answer your question, you shouldn't expect the same SQL to run identically on two different databases unless you can ensure the 'different' databases are actually identical in every respect. i.e. they may have the same schema, but do they have the same amount of data. Have they both had statistics gathered to allow the optimiser to pick the most suitable execution plan for both. Are the parameters of database identical for memory requirements, tablespaces, rollback segments etc.
Take a look at When your query takes too long ... and you may gain some insight into where your problem lies.

Re-create Mailbox Database

I have a DB on a disk that is almost out of space, so I've moved all user mailboxes to a new DB, as recommended rather than offline defragging.
I have a single DAG made up of 3 members although 2 have all the DB Split between them (Active/passive).
Anyway I want to know now I've moved all users off it the simplest way of removing the existing DB (Which now only has the System arbitration mailbox left on it) and re-creating it ? e.g; can I simply remove the DB via powershell, what happens to arbitration
or do I not care?, then setup as if I was creating a brand new DB with the same name ?
steps and Suggestions please, Many Thanks

Hi,
From your description, I recommend you move (not remove) your EDB files using the following cmdlet.
Move-DatabasePath "Mailbox Database identity" -EdbFilePath "x:\xxx"
What's more, you need to move the arbitration mailboxes to the new mailbox database.
To verify whether the database is mounted and accessible you can use the following two cmdlets.
Get-MailboxDatabase -Status "Mailbox Database identity" | Select Name,Mounted
Test-MAPIConnectivity -Database "Mailbox Database identity"
Hope this can be helpful.
Best regards,
Amy Wang
TechNet Community Support

Query to table in Database Link returns value from local table

Hi
I made a databaselink (Create database link db_a.world connect to db_a identified by <user> using 'db_a.world')
Then I query a table, connected as a user in db_b.world (this is our developer database - identical to db_a): Select count(*) from table@db_a.world.
When I get the result - it comes from the database I am logged in to (db_b)! - This is easy to check, because when I run select count(*) from table - it shows the same number. When I connect to the remote database, the same query shows another (correct) number.
When I created the database link, Oracle demanded a loopback clause. Why is that, and can this be the reason for the strange behaviour?
Thanx
Anders
Narvik, Norway

Hi Anders,
A loopback database link is when you want to test connecting to the same database as say a different user. It can be used for testing purposes. Creating a database link doesn't require a loopback clause. The reason why you are getting the same row count as db_b.world because db_a.world has been created as a loopback link.
In the example you have Create database link db_a.world connect to db_a identified by <user> using 'db_a.world' , the clause after 'connect to' is meant to be the username and the clause after 'identified by' is meant to be the password.
So, create a regular database link like this:
create database link db_a_link connect to <user> identified by <passwd> using <service name>
You shouldn't get an error message that the loopback clause has to be specified. Then try querying and hopefully it will work.
-Raj

MapiExceptionADNotFound When Creating a new Mailbox Database, No such error on the internet

HI
I have a problem that is when I create a new Mailbox Database I face the Error
Failed
Error:
Exchange is unable to mount the database that you specified. Specified database: EMAIL\Second Storage Group\EmailData; Error code: MapiExceptionADNotFound: Unable to mount database. (hr=0x80004005, ec=2417)
Exchange Management Shell command attempted:
mount-database -Identity 'CN=EmailData,CN=Second Storage Group,CN=InformationStore,CN=EMAIL,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Domain,DC=com'
Elapsed Time: 00:00:00
I have this server exchange 2007 SP1 running on Server 2003 SP2 R2 64-Bit
its also additional exchange to the old ex server 2003 SP2
what is this error
I check the evenlog and there is NO related error for this
and I ran EXPBA and it report no problem
I search MSN and Google for this and nothing usefull found
what shell I do
I am a fried that the Main database may fail if this present

Force replication betwenn Domain Controllers.
Article in PT-BR:
http://www.wellingtonagapto.org/2014/07/mapiexceptionadnotfound-unable-to-mount-database-hr-0x80004005-ec-2417-Exchange-Server-2007.html
Wellington Agápto
Consultor de Comunicações Unificadas & Mobilidade
ITIL, CCNA, MCP, MTA, MCITP, MCTS, MCSA, MCSE Communication
Edefense Segurança Digital
Site: http://www.edefense.com.br
Blog: http://www.wellingtonagapto.org

Changing database instance name

Hi,
I have oracle database 10g installed on linux.
and now we are aking the databas eto production leve to the www
do we need to change the oracle database name. is there any security reason for it, so outside doesn't need to know from the service name the location of the database. if we have to, then how to do it without affecting any existing processes.
or any other ways to secure the database identity.
any ways to give a alias to the ip address.
any suggestions please.
Thanks,
Philip.

The Oracle documentation contains a lot of security policies. In your case, you should be very cautious about firewall configuration and especially:
If Oracle Database is behind a firewall, then do not, under any circumstances, poke a hole through the firewall. For example, do not leave open port 1521 for Oracle Listener to make a connection to the Internet or vice versa.
Restrict the privileges of the listener, so that it cannot read or write files in the database or the Oracle server address space.
Harden the host operating system by disabling all unnecessary operating system services. Both UNIX and Windows platforms provide a variety of operating system services, most of which are not necessary for most deployments. Such services include FTP, TFTP, TELNET, and so forth. Be sure to close both the UDP and TCP ports for each service that is being disabled. Disabling one type of port and not the other does not make the operating system more secure.
(From http://download-uk.oracle.com/docs/cd/B19306_01/network.102/b14266/policies.htm#i1007433)

Could not mount database (hr=0x80004005,ec=1108)

Hi
I know this question has been asked before but my issue is different..
Exchange 2013 SP1 on Server 2012 R2
Was in process of migration from Exchange 2010 SP3 to Exchange 2013 SP1
Mail DB on d:\
Log Files on E:\
Since Migration was going....... No backups... :(
my Logfiles HDD crashed and not the database is not mounting... getting error
(hr=0x80004005,ec=1108)
Following is the output of mount database
Mount-Database -Identity maildb2013ex01
Failed to mount database "maildb2013ex01". Error: An Active Manager operation failed. Error: The database action
failed. Error: Operation failed with message: MapiExceptionDatabaseError: Unable to mount database. (hr=0x80004005,ec=1108)
Diagnostic context:
    Lid: 65256
    Lid: 10722   StoreEc: 0x454
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 45120   dwParam: 0x1D7050
    Lid: 57728   dwParam: 0x1D710C
    Lid: 53632   dwParam: 0x1D7244
    Lid: 61824   dwParam: 0x1D7244
    Lid: 46144   dwParam: 0x1D7244
    Lid: 34880   dwParam: 0x1D7293
    Lid: 34760   StoreEc: 0xFFFFFDDA
    Lid: 41344   Guid: 90bc4584-670e-4231-beb8-372cc68a87fa
    Lid: 35200   dwParam: 0x2388
    Lid: 46144   dwParam: 0x1D75EE
    Lid: 34880   dwParam: 0x1D75EE
    Lid: 54472   StoreEc: 0x1388
    Lid: 42184   StoreEc: 0x454
    Lid: 1750    ---- Remote Context End ----
    Lid: 1047    StoreEc: 0x454      [Database: MailDB2013EX01, Server: Exchange01.local.saisystems.com]
    + CategoryInfo          : InvalidOperation: (MailDB2013EX01:ADObjectId) [Mount-Database], InvalidOperationExcep
   tion
    + FullyQualifiedErrorId : [Server=EX01,RequestId=cf57b110-08c1-4808-b773-a7f7f50d7dbf,TimeStamp=7/6/2014 8:3
   9:29 AM] [FailureCategory=Cmdlet-InvalidOperationException] AA4B49BB,Microsoft.Exchange.Management.SystemConfigura
tionTasks.MountDatabase
    + PSComputerName        : ex01.local.domain.com
Following is output of essutil
eseutil /mh "D:\MailStore\MailDB\MailDB2013EX01.edb"
Extensible Storage Engine Utilities for Microsoft(R) Exchange Server
Version 15.00
Copyright (C) Microsoft Corporation. All Rights Reserved.
Initiating FILE DUMP mode...
         Database: D:\MailStore\MailDB\MailDB2013EX01.edb
DATABASE HEADER:
Checksum Information:
Expected Checksum: 0xe52a9911
Actual Checksum: 0xe52a9911
Fields:
        File Type: Database
         Checksum: 0xe52a9911
   Format ulMagic: 0x89abcdef
   Engine ulMagic: 0x89abcdef
Format ulVersion: 0x620,20
Engine ulVersion: 0x620,20
Created ulVersion: 0x620,20
     DB Signature: Create time:05/03/2014 14:34:31.599 Rand:3476067128 Computer:
         cbDbPage: 32768
           dbtime: 75195 (0x125bb)
            State: Dirty Shutdown
     Log Required: 370149-370261 (0x5a5e5-0x5a655)
    Log Committed: 0-370262 (0x0-0x5a656)
   Log Recovering: 370262 (0x5a656)
GenMax Creation: 07/05/2014 20:08:06.321
         Shadowed: Yes
       Last Objid: 446
     Scrub Dbtime: 0 (0x0)
       Scrub Date: 00/00/1900 00:00:00
     Repair Count: 0
      Repair Date: 00/00/1900 00:00:00.000
Old Repair Count: 0
Last Consistent: (0x3D,32,2D7) 05/04/2014 03:13:28.088
      Last Attach: (0x3E,2,268) 05/04/2014 03:14:06.633
      Last Detach: (0x0,0,0) 00/00/1900 00:00:00.000
    Last ReAttach: (0x5A651,2,0) 07/05/2014 20:07:29.961
             Dbid: 1
    Log Signature: Create time:05/03/2014 14:34:31.505 Rand:657597575 Computer:
       OS Version: (6.2.9200 SP 0 NLS ffffffff.ffffffff)
Previous Full Backup:
        Log Gen: 0-0 (0x0-0x0)
           Mark: (0x0,0,0)
           Mark: 00/00/1900 00:00:00.000
Previous Incremental Backup:
        Log Gen: 0-0 (0x0-0x0)
           Mark: (0x0,0,0)
           Mark: 00/00/1900 00:00:00.000
Previous Copy Backup:
        Log Gen: 0-0 (0x0-0x0)
           Mark: (0x0,0,0)
           Mark: 00/00/1900 00:00:00.000
Previous Differential Backup:
        Log Gen: 0-0 (0x0-0x0)
           Mark: (0x0,0,0)
           Mark: 00/00/1900 00:00:00.000
Current Full Backup:
        Log Gen: 0-0 (0x0-0x0)
           Mark: (0x0,0,0)
           Mark: 00/00/1900 00:00:00.000
Current Shadow copy backup:
        Log Gen: 0-0 (0x0-0x0)
           Mark: (0x0,0,0)
           Mark: 00/00/1900 00:00:00.000
     cpgUpgrade55Format: 0
    cpgUpgradeFreePages: 0
cpgUpgradeSpaceMapPages: 0
       ECC Fix Success Count: none
   Old ECC Fix Success Count: none
         ECC Fix Error Count: none
     Old ECC Fix Error Count: none
    Bad Checksum Error Count: none
Old bad Checksum Error Count: none
Last checksum finish Date: 00/00/1900 00:00:00.000
Current checksum start Date: 00/00/1900 00:00:00.000
      Current checksum page: 0
Operation completed successfully in 1.16 seconds.
The DB Size id 300GB, right now copying it to separate location
Can someone enlighten me what next is to be done or how can I mount this DB without log files...
will it mount without Logfiles???
Thanks
Bikram
bikram

Hi,
According to your description, your problematic database is in dirty shutdown state and your soft repair ends with errors. In this case, I'd like to say, the dirty shutdown state may be caused by that the required log files are missing. Thus, I recommend
you try the hard recovery by using Eseutil /p or
Eseutil /d /r.http://support.microsoft.com/kb/259851/en-us
Thanks,
Angela Shi
TechNet Community Support

In the Middle of a DB Migration Question

Dismounted mailbox database using dismount-database -identity "DB NAme". Then ran eseutil /mh to verify clean shutdown state:
State: Clean Shutdown
Log Required: 0-0 (0x0-0x0)
Log Committed: 0-0 (0x0-0x0)
The next command to run according to
http://technet.microsoft.com/en-us/library/dd876926(v=exchg.150).aspx is eseutil /R <Enn> where Enn is the log file prefix. According to the output of eseutil /mh above, do I need to even run eseutil /R command? Looks like all the logs have been committed?
I wont do anything until I hear from someone here.

Hi,
As the error described, the mailbox is already on the target database so the cmdlet threw an error instead of creating a move request.
What's more, I would like to verify what do you mean by "old mail", are these old messages in archive mailbox?
Best regards,
Amy Wang
TechNet Community Support

Primary key column auto increment

Hello,
In my Azure SQL Database I noticed that weird thing is happening. I have table with primary key column with auto increment, and all works fine, on new insert that value automatically increment, but every now and then, that value, for no reason, increments
for 1000.
For instance i have in DB values in this order: 1, 2, 3, 4, 1001, 1002, 1003, 2004, 2005, 3001, 3002...
Why is this happening?

Hello ,
you can see this thread :
http://stackoverflow.com/questions/17012339/windows-azure-sql-database-identity-auto-increment-column-skips-values
It's seems that SQL Server work with sequence and block 1000 values. In the cloud, your SQL Azure Database can be move from one server to an other or restarted and so a new sequence is used. That's why you jump from 4 to 1001.
Regards

DB Adapter - PostgreSQL - Primary key - auto increment handling

Hi,
I have to connect to a PostgreSQL DB. I have a table in which has a primary key called seq_id. This seq_id is being incremented using a sequence.
I have to configure the DB adapter for this table. The problem is that while creating the adapter it does not allow me to deselect the primary key (seq_id). Because of this I have to supply a value for the seq_id while inseting the data using the adapter. But this defeats the purpose of sequence (auto increment).
Is there a way to get around this and to avoid specifying the value for seq_id while using the DB Adapter and let it get inserted using the sequence of the DB?
Thanks,
Sanjay

Hello ,
you can see this thread :
http://stackoverflow.com/questions/17012339/windows-azure-sql-database-identity-auto-increment-column-skips-values
It's seems that SQL Server work with sequence and block 1000 values. In the cloud, your SQL Azure Database can be move from one server to an other or restarted and so a new sequence is used. That's why you jump from 4 to 1001.
Regards

Load Balancing and Asynchronous Multimaster Replication

We are planning a new project with 2 server lines for load balancing reasons. We also plan to use sessions being valid for 30 minutes. Each of the 2 server lines has its own Oracle database (identical tables) for the transactions. Within one session the load balancing sends the user always to the same server line.
Independant transactions are executed on both server lines.
Is Asynchronous Multimaster Replication the adequate solution to have the two databases synchronized, what has to be considered (network, memory, cpu) or what else can (has to) be used ?
We want to avoid a RAC solution because of the high costs.

The two options that come to mind here are asynchronous multimaster replication and Oracle Streams.
- What version of the Oracle database will you be using?
- What sort of transaction volume do you anticipate? How much redo generation?
- What sort of connection exists between the two machines?
- Is there an upper limit on the time that can be taken to replicate a transaction from one machine to the other?
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Exchange information store service is not starting on exchange 2010

i've run the updates on the exchange 2010 and restart the servers, after one week i've restart the 2003 dc and exchange 2010. now exchange information store service is not starting on exchange 2010 and the database are dismounted
help pls

I have just installed Exchange 2010 on my system and when trying to mount the database it fails. The Information Store service will not start on my server. Time is in sync with the DC and the initial install went fine. I have the following
from event viewer:
Cmdlet failed. Cmdlet Mount-Database, parameters {Identity=dellstslab}.
details
System
Provider
Name]
MSExchange
CmdletLogs
EventID
6
Qualifiers]
49152
Level
2
Task
1
Keywords
0x80000000000000
TimeCreated
SystemTime]
2014-02-18T16:43:34.000000000Z
EventRecordID
107
Channel
MSExchange
Management
Computer
Exchange2010.dellstslab.com
Security
EventData
Mount-Database
{Identity=dellstslab}
dellstslab.com/Users/Administrator
S-1-5-21-2431095704-2869583948-1116897492-500
S-1-5-21-2431095704-2869583948-1116897492-500
ServerRemoteHost-EMC
1412
14
00:00:01.1388073
View Entire Forest:
'True', Configuration Domain Controller: 'WIN-NVOVSE1R716.dellstslab.com',
Preferred Global Catalog: 'WIN-NVOVSE1R716.dellstslab.com', Preferred Domain
Controllers: '{ WIN-NVOVSE1R716.dellstslab.com }'
System.InvalidOperationException:
Couldn't mount the database that you specified. Specified database: dellstslab;
Error code: An Active Manager operation failed with a transient error. Please
retry the operation. Error: Database action failed with transient error. Error:
A transient error occurred during a database operation. Error:
MapiExceptionNetworkError: Unable to make admin interface connection to server.
(hr=0x80040115, ec=-2147221227) Diagnostic context: ...... Lid: 12696 dwParam:
0x6D9 Msg: EEInfo: Generation Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam:
0x6D9 Msg: EEInfo: Generating component: 2 Lid: 14744 dwParam: 0x6D9 Msg:
EEInfo: Status: 1753 Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location:
501 Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9
Msg: EEInfo: NumberOfParameters: 4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]:
Unicode string: ncalrpc Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode
string: Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662 Lid: 24060
StoreEc: 0x80040115 Lid: 23746 Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid:
27842 StoreEc: 0x80040115 Lid: 20866 Lid: 29058 StoreEc: 0x80040115 [Database:
dellstslab, Server: EXCHANGE2010.dellstslab.com]. --->
Microsoft.Exchange.Cluster.Replay.AmDbActionWrapperTransientException: An Active
Manager operation failed with a transient error. Please retry the operation.
Error: Database action failed with transient error. Error: A transient error
occurred during a database operation. Error: MapiExceptionNetworkError: Unable
to make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context: ...... Lid: 12696 dwParam: 0x6D9 Msg: EEInfo: Generation
Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam: 0x6D9 Msg: EEInfo: Generating
component: 2 Lid: 14744 dwParam: 0x6D9 Msg: EEInfo: Status: 1753 Lid: 9624
dwParam: 0x6D9 Msg: EEInfo: Detection location: 501 Lid: 13720 dwParam: 0x6D9
Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters:
4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncalrpc Lid:
8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: Lid: 12952 dwParam:
0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570 Lid: 12952 dwParam: 0x6D9 Msg:
EEInfo: prm[3]: Long val: 382312662 Lid: 24060 StoreEc: 0x80040115 Lid: 23746
Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid: 27842 StoreEc: 0x80040115 Lid:
20866 Lid: 29058 StoreEc: 0x80040115 --->
Microsoft.Exchange.Data.Storage.AmServerTransientException: An Active Manager
operation failed with a transient error. Please retry the operation. Error:
MapiExceptionNetworkError: Unable to make admin interface connection to server.
(hr=0x80040115, ec=-2147221227) Diagnostic context: ...... Lid: 12696 dwParam:
0x6D9 Msg: EEInfo: Generation Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam:
0x6D9 Msg: EEInfo: Generating component: 2 Lid: 14744 dwParam: 0x6D9 Msg:
EEInfo: Status: 1753 Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location:
501 Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9
Msg: EEInfo: NumberOfParameters: 4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]:
Unicode string: ncalrpc Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode
string: Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662 Lid: 24060
StoreEc: 0x80040115 Lid: 23746 Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid:
27842 StoreEc: 0x80040115 Lid: 20866 Lid: 29058 StoreEc: 0x80040115 --->
Microsoft.Mapi.MapiExceptionNetworkError: MapiExceptionNetworkError: Unable to
make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context: ...... Lid: 12696 dwParam: 0x6D9 Msg: EEInfo: Generation
Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam: 0x6D9 Msg: EEInfo: Generating
component: 2 Lid: 14744 dwParam: 0x6D9 Msg: EEInfo: Status: 1753 Lid: 9624
dwParam: 0x6D9 Msg: EEInfo: Detection location: 501 Lid: 13720 dwParam: 0x6D9
Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters:
4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncalrpc Lid:
8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: Lid: 12952 dwParam:
0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570 Lid: 12952 dwParam: 0x6D9 Msg:
EEInfo: prm[3]: Long val: 382312662 Lid: 24060 StoreEc: 0x80040115 Lid: 23746
Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid: 27842 StoreEc: 0x80040115 Lid:
20866 Lid: 29058 StoreEc: 0x80040115 at
Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult,
SafeExInterfaceHandle iUnknown, Exception innerException) at
Microsoft.Mapi.ExRpcAdmin.Create(String server, String user, String domain,
String password) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmStoreHelper.Mount(Guid mdbGuid,
MountFlags flags) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.<>c__DisplayClassb.<MountDatabaseDirect>b__2()
at
Microsoft.Exchange.Cluster.Replay.FailoverPerformanceTrackerBase`1.RunTimedOperation(TOpCode
opCode, Action operation) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabaseDirect(Guid
mdbGuid, MountFlags storeFlags, AmMountFlags amMountFlags, AmDbActionCode
actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass19.<MountDatabaseDirect>b__18()
at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation) --- End of inner exception stack
trace (Microsoft.Mapi.MapiExceptionNetworkError) --- --- End of stack trace on
server (Exchange2010.dellstslab.com) --- at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String
databaseName, String serverName, RpcErrorExceptionInfo errorInfo) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunRpcOperationWithAuth(AmRpcOperationHint
rpcOperationHint, String serverName, String databaseName, NetworkCredential
networkCredential, Nullable`1 timeoutMs, InternalRpcOperation rpcOperation) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.MountDatabaseDirectEx(String
serverToRpc, Guid dbGuid, AmMountArg mountArg) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbAction.MountDatabaseDirect(AmServerName
serverName, AmServerName lastMountedServerName, Guid dbGuid, MountFlags
storeFlags, AmMountFlags amFlags, AmDbActionCode actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbStandaloneAction.<>c__DisplayClass2.<MountInternal>b__0(Object
, EventArgs ) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmHelper.HandleKnownExceptions(EventHandler
ev) --- End of inner exception stack trace
(Microsoft.Exchange.Data.Storage.AmServerTransientException) --- at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbOperation.Wait(TimeSpan
timeout) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabase(Guid
mdbGuid, MountFlags storeFlags, AmMountFlags amMountFlags,
DatabaseMountDialOverride mountDialOverride, AmDbActionCode actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass4.<MountDatabase>b__3()
at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation) --- End of stack trace on server
(EXCHANGE2010.dellstslab.com) --- at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String
databaseName, String serverName, RpcErrorExceptionInfo errorInfo) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunDatabaseRpcWithReferral(AmRpcOperationHint
rpcOperationHint, Database database, String targetServer, InternalRpcOperation
rpcOperation) at
Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.RequestMount(MountFlags
storeMountFlags) at
Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.InternalProcessRecord()
--- End of inner exception stack trace ---
7
Microsoft.Exchange.Cluster.Replay.AmDbActionWrapperTransientException:
An Active Manager operation failed with a transient error. Please retry the
operation. Error: Database action failed with transient error. Error: A
transient error occurred during a database operation. Error:
MapiExceptionNetworkError: Unable to make admin interface connection to server.
(hr=0x80040115, ec=-2147221227) Diagnostic context: ...... Lid: 12696 dwParam:
0x6D9 Msg: EEInfo: Generation Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam:
0x6D9 Msg: EEInfo: Generating component: 2 Lid: 14744 dwParam: 0x6D9 Msg:
EEInfo: Status: 1753 Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location:
501 Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9
Msg: EEInfo: NumberOfParameters: 4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]:
Unicode string: ncalrpc Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode
string: Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662 Lid: 24060
StoreEc: 0x80040115 Lid: 23746 Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid:
27842 StoreEc: 0x80040115 Lid: 20866 Lid: 29058 StoreEc: 0x80040115 --->
Microsoft.Exchange.Data.Storage.AmServerTransientException: An Active Manager
operation failed with a transient error. Please retry the operation. Error:
MapiExceptionNetworkError: Unable to make admin interface connection to server.
(hr=0x80040115, ec=-2147221227) Diagnostic context: ...... Lid: 12696 dwParam:
0x6D9 Msg: EEInfo: Generation Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam:
0x6D9 Msg: EEInfo: Generating component: 2 Lid: 14744 dwParam: 0x6D9 Msg:
EEInfo: Status: 1753 Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location:
501 Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9
Msg: EEInfo: NumberOfParameters: 4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]:
Unicode string: ncalrpc Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode
string: Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662 Lid: 24060
StoreEc: 0x80040115 Lid: 23746 Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid:
27842 StoreEc: 0x80040115 Lid: 20866 Lid: 29058 StoreEc: 0x80040115 --->
Microsoft.Mapi.MapiExceptionNetworkError: MapiExceptionNetworkError: Unable to
make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context: ...... Lid: 12696 dwParam: 0x6D9 Msg: EEInfo: Generation
Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam: 0x6D9 Msg: EEInfo: Generating
component: 2 Lid: 14744 dwParam: 0x6D9 Msg: EEInfo: Status: 1753 Lid: 9624
dwParam: 0x6D9 Msg: EEInfo: Detection location: 501 Lid: 13720 dwParam: 0x6D9
Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters:
4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncalrpc Lid:
8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: Lid: 12952 dwParam:
0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570 Lid: 12952 dwParam: 0x6D9 Msg:
EEInfo: prm[3]: Long val: 382312662 Lid: 24060 StoreEc: 0x80040115 Lid: 23746
Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid: 27842 StoreEc: 0x80040115 Lid:
20866 Lid: 29058 StoreEc: 0x80040115 at
Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult,
SafeExInterfaceHandle iUnknown, Exception innerException) at
Microsoft.Mapi.ExRpcAdmin.Create(String server, String user, String domain,
String password) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmStoreHelper.Mount(Guid mdbGuid,
MountFlags flags) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.<>c__DisplayClassb.<MountDatabaseDirect>b__2()
at
Microsoft.Exchange.Cluster.Replay.FailoverPerformanceTrackerBase`1.RunTimedOperation(TOpCode
opCode, Action operation) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabaseDirect(Guid
mdbGuid, MountFlags storeFlags, AmMountFlags amMountFlags, AmDbActionCode
actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass19.<MountDatabaseDirect>b__18()
at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation) --- End of inner exception stack
trace (Microsoft.Mapi.MapiExceptionNetworkError) --- --- End of stack trace on
server (Exchange2010.dellstslab.com) --- at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String
databaseName, String serverName, RpcErrorExceptionInfo errorInfo) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunRpcOperationWithAuth(AmRpcOperationHint
rpcOperationHint, String serverName, String databaseName, NetworkCredential
networkCredential, Nullable`1 timeoutMs, InternalRpcOperation rpcOperation) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.MountDatabaseDirectEx(String
serverToRpc, Guid dbGuid, AmMountArg mountArg) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbAction.MountDatabaseDirect(AmServerName
serverName, AmServerName lastMountedServerName, Guid dbGuid, MountFlags
storeFlags, AmMountFlags amFlags, AmDbActionCode actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbStandaloneAction.<>c__DisplayClass2.<MountInternal>b__0(Object
, EventArgs ) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmHelper.HandleKnownExceptions(EventHandler
ev) --- End of inner exception stack trace
(Microsoft.Exchange.Data.Storage.AmServerTransientException) --- at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbOperation.Wait(TimeSpan
timeout) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabase(Guid
mdbGuid, MountFlags storeFlags, AmMountFlags amMountFlags,
DatabaseMountDialOverride mountDialOverride, AmDbActionCode actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass4.<MountDatabase>b__3()
at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation) --- End of stack trace on server
(EXCHANGE2010.dellstslab.com) --- at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String
databaseName, String serverName, RpcErrorExceptionInfo errorInfo) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunDatabaseRpcWithReferral(AmRpcOperationHint
rpcOperationHint, Database database, String targetServer, InternalRpcOperation
rpcOperation) at
Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.RequestMount(MountFlags
storeMountFlags) at
Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.InternalProcessRecord()
The system attendant service does not start either. Any ideas?

Database identity...

Similar Messages

Maybe you are looking for