Database is not discovered.

I've added 2 new database targets in Grid Control. One of the targets is used as primary database and the other one is physical standby. Data guard configuration is set manually and is working well. However when i click "Verify Configuration" in Grid Control i get the error "Database is not discovered". Also, performance overview is reporting this error "Unable to obtain Agent location for target <my target name>. You may not currently be logged in."
Any idea why is this happening?

I solved my problem. The data guard from OEM now dicovers both databases. I'm not sure what caused the problem, but i think it was the naming of databases inside dataguard broker and OEM. Because my dataguard configuration was done through SQL and command line broker.
What i did now was, removed standby database from broker configuration in OEM, and added it again. Performed switchover and did the same thing again with other database. This way broker database configuration got new property that can be seen with "show database" command inside broker command line. Property name is "OEM Name:", and it wasn't there before i added standby database through OEM.
I hope this helps.

Similar Messages

WARNING: Database "DBNAME" is not discovered !!!

Dear Gurus,
After running the datagurd verification in my Grid I get following results :
Initializing
Connected to instance srvldbp03:DMWEB
Starting alert log monitor...
Updating Data Guard link on database homepage...
WARNING: Database DMWEB_SITE2 is not discovered. >>>>> !!!!
Data Protection Settings:
Protection mode : Maximum Performance
Redo Transport Mode settings:
DMWEB_SITE1: ASYNC
DMWEB_SITE2: ASYNC
Checking standby redo log files.....OK
Checking Data Guard status
DMWEB_SITE1 : Normal
DMWEB_SITE2 : Normal
Checking Inconsistent Properties
Checking agent status
DMWEB_SITE1 ... OK
DMWEB_SITE2 ... WARNING: Database DMWEB_SITE2 is not discovered. >>>>!!!!
WARNING: Switchover or failover may not succeed as a result.
Switching log file 35.Done
Checking applied log on DMWEB_SITE2...OK
Processing completed.
My Question ?
What shall I configure in my Dataguard or database parameters in sort it should be "DISCOVERED"?
When looking for information on this ..... there aren't any ....
Thxs if you can help

I've followed instructions as doc ID in metalink :
Problem: Verify Dataguard Configuration Shows Database Is Not Discovered [ID 412812.1]
Solution
1. Apply Grid Control patchset 10.2.0.3 >> I^m in 10.2.0.5
or
2. Apply patch 4917358 >>> So I applied the patch
The issue still there!!!!
Any Clues ?

SQL 2005 Databases not Discovered

We have a SQL 2005 server, where the DB instance itself has been discovered but the SQL DBs themselves have not. Any way to understand / troubleshoot why not. Other instances work just fine.

The account is just fine, and it is a sysadmin on the server. It discovered the instance even, unlike by my other post:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/7da4b442-c9e4-4aac-9cb9-d2af0b1ffbaa/clustered-database-engine-not-discovered?forum=operationsmanagermgmtpacks&prof=required
That said, it doesn't discover DBs. I haven't seen any errors in the event log pertaining to the discovery. The bug fix posted above also hasn't helped me.
When trying to run this MP script manually it also returns XML:
http://blogs.technet.com/b/jimmyharper/archive/2009/06/11/sql-database-properties-not-discovered.aspx
So, I'm not really sure that is going on here. What is the expected return I am supposed to get.

OEM V2.2/will not discover database

Hello,
I am using oracle 8i database in windows nt environment. When in OEM, the discovery services will see the node that database is loaded and running on, but will not discover the database. I can manually configure the database, but the config is using the wrong instance (orcl) instead of webar. I have checked tnsnames.ora, sql.net, listener.ora and can find nothing wrong. I can connect to the database no problem. OEM is the only software that has a problem. Is there a configuration file for the Intelligent Agent? Am I missing something else?
Thanks for the help.
Sue Misslbeck

I am not getting any error at all. It will discover the node (ora1) where the database resides, however, it will not show a database folder for this node.
Should I be getting an error message?
Thanks.
Sue

SQL Server 2012 Express Instance is Not Discovered

I have a single SQL Server 2012 Express instance that is the backend database for a small door security application. I just noticed after having deployed the OpsMgr agent months ago that it never discovered the SQL instance. The SQL instance
is, as stated, Express, and it's the only Express instance I have. Is that why it is not discovered? All the documentation I found seems to indicate the opposite -- that Express is discovered and there are steps you can take to exclude Express
instances. I have no overrides set to exclude any instance or any database.
- System Center Operations Manager 2012 RTM (no SP1, no R2)
- SQL Server 2012 MP version 6.3.173.1
- SQL Server is Windows Server 2012
- SQL Server 2012 Express running on a Hyper-V VM. Instance is named DOORSERVER\Eclipse
- Agent is installed and other discoveries seem to be working fine
- No discovery errors in the event log related to SQL, although there is one about the Windows Server 2008 discovery not being able to start, but I'm on Windows Server 2012, so I am guessing that's okay?
- No overrides are set on the discovery
- Discovery has found every other SQL Server 2012 instance (standard and enterprise editions)

Well, just realized I didn't have the latest MP. Upgrading to 6.4.1.0 version of the SQL MP fixed the discovery issue.

Agent Up and Running, uploading, but host not discovered

We recently rebooted one node in a two node RAC. When it came up we were having problems getting information in Enterprise manager. The agent comes up, uploads successfully and everything seem fine, but no updates in EM. We removed the host and all associated targets and tried reconfiguring and now EM cannot discover the host. It sees the agent, but not the host. What could have possibly gone wrong? This was all working fine before the reboot.
Agent Version : 10.1.0.5.1
OMS Version : 10.2.0.5.0
Protocol Version : 10.1.0.2.0
Database version is 10.1.0.3
Running on Red Hat Linux Itanium 3.2.3-47
Targets.xml is empty now on this node.
Edited by: user8720546 on Mar 17, 2010 2:55 PM

Hi Erika,
still agent is not discovering by the host. Please find the details command output. During agent upload i am getting error.
bash-3.2$ ./agentca -d
Stopping the agent using /opt/oracle/OracleHomes/agent10g/bin/emctl stop agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Stopping agent ... stopped.
Running agentca using /opt/oracle/OracleHomes/agent10g/oui/bin/runConfig.sh ORACLE_HOME=/opt/oracle/OracleHomes/agent10g ACTION=Configure MODE=Perform RESPONSE_FILE=/opt/oracle/OracleHomes/agent10g/response_file RERUN=TRUE INV_PTR_LOC=/opt/oracle/OracleHomes/agent10g/oraInst.loc COMPONENT_XML={oracle.sysman.top.agent.10_2_0_1_0.xml}
Perform - mode is starting for action: Configure
Perform - mode finished for action: Configure
You can see the log file: /opt/oracle/OracleHomes/agent10g/cfgtoollogs/oui/configActions2010-03-23_01-50-58-PM.log
bash-3.2$ ./emctl clearstate agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
EMD clearstate completed successfully
bash-3.2$ ./emctl upload agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
EMD upload error: uploadXMLFiles skipped :: OMS version not checked yet..
bash-3.2$ ./emctl status agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.5.0
OMS Version : 10.2.0.5.0
Protocol Version : 10.2.0.5.0
Agent Home : /opt/oracle/OracleHomes/agent10g
Agent binaries : /opt/oracle/OracleHomes/agent10g
Agent Process ID : 6598
Parent Process ID : 6582
Agent URL : https://kanlddev6201a.us.oracle.com:3872/emd/main/
Repository URL : https://idcovms1c.idc.oracle.com:1159/em/upload
Started at : 2010-03-23 13:52:14
Started by user : bpatra
Last Reload : 2010-03-23 13:52:14
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 342
Size of XML files pending upload(MB) : 40.36
Available disk space on upload filesystem : 31.31%
Last attempted heartbeat to OMS : 2010-03-23 13:53:29
Last successful heartbeat to OMS : unknown
Agent is Running and Ready

Add-on connection error (-105) Access to company database is not permitted

Good day,
One of our clients have upgraded to 8.8 PL 11 (from 2007A PL 41).
Somehow the SBO-Common became corrupt and SAP suggested that we reinstall the SBO-Common.
The problem is that now the add-on (developed by us) is not connecting.
The add-on connects to UI API and DI API, but when trying to connect to the company with SAPbobsCOM.Company, an error is returned (error code: -105).
I am also confused about what the error actually is, bacause according to the SDK Help file, error -105 is "The observer.dll init has failed.", but the error message returned by the add-on is "Access to company database is not permitted; log on to SAP Business One and sign end user license agreement (EULA)"
I have tried resigning the EULA, but no success.
I have also tried deleting the content of the %temp%\SM_OBS_DLL, as suggested in another post.
The version of the OBServer.dll is 8.80.229.0 - I believe that this is the correct version for 8.8 PL 11?
Please advise.
Kind regards,
Rikard

Good day all,
My apologies.
I have discovered what the problem was - and it was me.
I did not realise that the connection I was making was not to the same database that I was connected to.
Therefore, I had to log onto the other database and sign the EULA.
The error explained exactly what I needed to do, but I wasn't paying attention.
Regards,
Rikard

RAC11.2 EMGC 11.1 node did not discover ASM

Hi,
we installed a two node RAC with ASM and grid infrastructure on OEL. On system level grid and db runs fine.
#>crsctl stat res -t --> all ok.
We deploy the agents form EMGC 11.1the installation was finish successfully.
On node one the agent discover all components form the node...host, +ASM1, LISTENER_node1, SCANS1,2
But on node two the agent did not discover +ASM2 and the LISTENER_node2.
All Passwords are the same on both nodes and provided to the EMGC11.1
In configuration tab in EMGC 11.1 all installations are found
Oracle Database 11g 11.2.0.2.0     /u01/app/oracle/product/11.2.0/dbhome_1 (OraDb11g_home1)     Jun 9, 2011 1:26:07 PM GMT
Oracle Grid Infrastructure 11.2.0.2.0     /u01/app/11.2.0/grid (Ora11g_gridinfrahome1)     Jun 9, 2011 12:23:31 PM GMT
Oracle Management Agent 11.1.0.1.0     /u01/app/oracle/product/agent11g (agent11g1)     Jun 14, 2011 1:14:26 PM GMT
node2 #>emctl status agent ---> agent OK heartbeat to OMS --> 2011-06......
Does anyone can help to find why the agent on node2 don´t find all components. Or how to tell agent to rediscover everything.
Thanks
*T

have you installed the agent in clustermode?
I can't tell you the reason why one agent has discovered the node completely and why the other hasnt't. Please compare the file target.xml (.../sysman/emd) from the fully discovered node with the the file target.xml of the other node. Do both contain the same amount of targets?
If not, you may edit this file on the node where the targets are missing (but be careful: you have ASM1 on node#1 and ASM2 on node #2).
And you certainly have to replace the hostname from node #1 with host-name of node #2. But before editing this file please shutdown the
agent and restart them afterwards. I know that this way is not supported or recommended by Oracle - but I have done that before and it worked
fine.
If you want to figure out why the targets on one node haven't been discovered please check the logfiles under .../sysman/log. Maybe you
find a reason. Any you could try "emctl stop agent", "emctl clearstate agent" and "emctl start agent"...

Dynamics AX 2009 MP - Batch Job Not Discovered

Looking for ideas to resolve issue where Batch Jobs are not discovered and viewable in OpsConsole.
Confirmed the RunAsAccount is a member of local Administrators group on each DAX node and read access on the DynamicsAX database. Also enabled monitors for Batch Tasks and Users and waited a day for discovery to run at 12am. Do not see any objects under
Batch Job/Tasks/Users State Views. Application Object Server state is monitored but state of Application Object Server Computers is not monitored.
Around the time I enabled Batch Job monitoring, events 4502, 1103 and 31400 began.
I do not understand the MP reference: "Batch jobs are displayed only when the user who created the job is currently connected to an AOS instance."
Any help or ideas would be greatly appreciated, thanks.
A module of type "Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.GroupCalculationModule" reported an exception Microsoft.EnterpriseManagement.Common.DataAccessLayerException: Invalid property name: IsDynamicsInstalledAttribute_D07CDD43_9CEF_478E_B319_44D7528A2843
   at Microsoft.EnterpriseManagement.DataAccessLayer.ParameterizedCriteriaBuilder.GetColumnDefinitionForProperty(String propertyName, QueryDefinition queryDefinition, IList`1 projectedColumnDefinitions)
   at Microsoft.EnterpriseManagement.DataAccessLayer.ParameterizedCriteriaBuilder.ResolveColumnForProperty(ICriteriaContext criteriaContext, XmlReader criteriaReader, Nullable`1 typeContextId, IList`1 projectedColumnDefinitions)
   at Microsoft.EnterpriseManagement.DataAccessLayer.ParameterizedCriteriaBuilder.ParsePredicateWithProperty(ICriteriaContext criteriaContext, Nullable`1 typeContextId, XmlReader criteriaReader)
   at Microsoft.EnterpriseManagement.DataAccessLayer.ParameterizedCriteriaBuilder.ParsePredicate(ICriteriaContext criteriaContext, Nullable`1 typeContextId, XmlReader criteriaReader)
   at Microsoft.EnterpriseManagement.DataAccessLayer.ParameterizedCriteriaBuilder.ParseCriteria(ICriteriaContext criteriaContext, Nullable`1 managedTypeIdContext, XmlReader criteriaReader)
   at Microsoft.EnterpriseManagement.DataAccessLayer.SqlCommandBuilder.CreateWhereClauseFromCriteria(ICriteriaContext criteriaResolver, String criteriaXml, IList`1 internalColumnDefinitions)
   at Microsoft.EnterpriseManagement.DataAccessLayer.SqlCommandBuilder.CreateCriteria(ICriteriaContext criteriaResolver, String criteriaXml, Dictionary`2 parameterValues, IList`1 conditionalRequiredParams, IList`1 internalColumnDefinitions)
   at Microsoft.EnterpriseManagement.DataAccessLayer.QueryRequest.CreateSqlCommandForSelectType()
   at Microsoft.EnterpriseManagement.DataAccessLayer.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
   at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.QueryGenerator.ExecuteSnapshotQuery(MembershipRule membershipRule, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.ExpressionEvaluatorForSnapshot.EligibleBySnapshotResults(MembershipRule membershipRule, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.ExpressionEvaluatorForSnapshot.GetRelationshipChangesForSnapshot(MembershipRule membershipRule, Guid groupInstanceId, Guid groupTypeId, Guid relationshipId, IList`1 groupKeyNameValuePairs,
DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.MembershipRuleEvaluator.EvaluateSnapshot(MembershipSubscription subscription, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.MembershipRuleEvaluator.EvaluateDifference(MembershipSubscription membershipSubscription, List`1 membershipChanges, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.MembershipRuleEvaluator.EvaluateDifference(MembershipSubscription subscription, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.MembershipCalculationManager.SnapshotCalculation(MembershipSubscription membershipSubscription, DatabaseConnection databaseConnection) which was running as part of rule "Microsoft.Dynamics.AX.Management.Pack.DynamicsServer.Group.DiscoveryRule"
running for instance "Microsoft Dynamics AX 2009 Computers Group" with id:"{B20E0F37-C8D3-AFCC-E21E-473B019FD826}" in management group "PRESTOPROD".

HI,
It seems a known issue with Dynamics AX 2009 MP. Sorry for the inconvenience.
http://blogs.technet.com/b/operationsmgr/archive/2009/06/23/known-issues-with-the-microsoft-dynamics-ax-2009-management-pack-for-systems-center-operations-manager-2007.aspx
Niki Han
TechNet Community Support

Thunderbolt display: devices not discovered after using Mini DisplayPort–to–VGA adapter

I have an interested problem related to using my MacBook Air in clamshell (closed) mode, connected to a Thunderbolt display. The problem appears to be related to moving my MacBook air between my office and my home.
At the office, I use the MacBook Air with an external VGA display, connected via the Mini DisplayPort–to–VGA adapter. At home, I use the MacBook Air together with a Thunderbolt display. An Apple USB keyboard is also connected to the display.
Mini DisplayPort–to–VGA adapter implicated
The following sequence of events causes the problem to occur:
Use the MacBook air (open) together with a VGA display, connected via a Mini DisplayPort–to–VGA adapter (depicted at right);
Put the MacBook Air to sleep by closing the lid, and disconnect the Mini DisplayPort–to–VGA adapter (I am not sure if the order of these two steps is significant—I usually perform them almost simultaneously when packing up my MacBook Air and getting ready to leave the office); and
With the MacBook Air still closed, connect it to a Thunderbolt display with a connected USB keyboard.
At this point, I would expect to be able to wake up the MacBook Air by tapping on the space bar of the keyboard. However, what I have observed is that this does not wake the MacBook Air.
I can wake the MacBook however by moving or clicking a Bluetooth mouse that is paired with the MacBook Air.
At this point, although the MacBook Air is awake, and the display is working, the USB keyboard connected to the display still does not work. This is the problem, in a nutshell.
Unplugging the USB keyboard from the display, and plugging it back in causes the MacBook Air properly to identify the keyboard.
I used Apple System Profiler to save a list of identified devices at two points in time:
Immediately after waking the MacBook Air by moving the Bluetooth mouse (at which point the USB keyboard was not working); and
After unplugging and plugging in again the USB keyboard (at which point the USB keyboard worked fine).
Many devices are enumerated in the second list that are missing from the first. For example:
Keyboard Hub@fe110000 <class IOUSBHubDevice, id 0x1000378ef, !registered, !matched, inactive, busy 3 (37993 ms), retain 6>
AppleUSBHub <class AppleUSBHub, id 0x1000378f2, !registered, !matched, inactive, busy 1 (37987 ms), retain 6>
IOUSBInterface@0 <class IOUSBInterface, id 0x1000378f4, !registered, !matched, inactive, busy 1 (37986 ms), retain 6>
Keyboard Hub@fe110000 <class IOUSBHubDevice, id 0x1000378f6, registered, matched, active, busy 0 (7 ms), retain 10>
AppleUSBHub <class AppleUSBHub, id 0x1000378f9, registered, matched, active, busy 0 (1 ms), retain 9>
IOUSBInterface@0 <class IOUSBInterface, id 0x1000378fb, !registered, !matched, active, busy 0, retain 7>
Apple Keyboard@fe112000 <class IOUSBDevice, id 0x1000378fd, registered, matched, active, busy 0 (112 ms), retain 11>
and many child devices…
Using the Mini DisplayPort–to–VGA adapter appears to be a necessary step to causing this problem to occur. If I merely disconnect the MacBook Air from the display, let it go to sleep, and then reconnect it again, the USB keyboard will work immediately and can be used to wake the computer from sleep.
Some devices are discovered even when the computer is in sleep mode. This is how it should work.
The problem appears to be that when a Mini DisplayPort–to–VGA adapter has been used since the last time the computer was connected to a Thunderbolt display, the MacBook air does not discover devices completely when it is again connected to the Thunderbolt display while in sleep mode.
Can anyone else reproduce this problem?

Hi glraczon.support,
It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
Here is an article that may help you with that process:
OS X Mountain Lion: About the Display pane of System Preferences
http://support.apple.com/kb/HT5369
Thanks,
Matt M.

Question: 10gR2 database can not see the 11gR2 ASM diskgroup?

Hi there,
env:
uname -rm
2.6.18-92.1.22.el5xen x86_64
Single server(non-RAC)
note: we don't want to upgrade 10gr2 database into 11gR2 yet. But we created the 11gR2 ASM, then a 11gr2 database on ASM, and plan to migrate datafile in 10gR2 database to 11gR2 ASM
1. oracle 10gR2 installed first version: 10.2.0.3.0
2. then install 11gR2 Grid Infrastructure, and created ASM (version 11gr2)
$ sqlplus / as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Tue Oct 19 10:30:56 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Automatic Storage Management option
SQL> col name form a15
SQL> col COMPATIBILITY form a15
SQL> col DATABASE_COMPATIBILITY form a15
SQL> l
1* select name , STATE, COMPATIBILITY, DATABASE_COMPATIBILITY from v$asm_diskgroup
SQL> /
NAME STATE COMPATIBILITY DATABASE_COMPAT
ORCL_DATA1 MOUNTED 11.2.0.0.0 10.1.0.0.0
ORA_DATA MOUNTED 10.1.0.0.0 10.1.0.0.0
3. in 10gR2 database
sqlplus /
SQL*Plus: Release 10.2.0.3.0 - Production on Tue Oct 19 12:12:31 2010
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning and Data Mining options
SQL> select * from v$asm_diskgroup;
no rows selected
4. pin the node into css
# /u01/app/product/11.2.0/grid/bin/crsctl pin css -n mynodename
CRS-4000: Command Pin failed, or completed with errors.
Question: 10gR2 database can not see the 11gR2 ASM diskgroup?
please help
Thanks
Scott

What is the output of
olsnodes -t -n
Also, see unix error log and ohasd error log if you find anything in that

Database is not starting after RAC installation

Hi All,
I have installed 10g R2 2-node RAC on RHEL4 without any problem. But after the installation the database is not starting and i'm not able to connect. It is showing the below error..
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Can anybody help what might be the problem?
Thanks,
Praveen

Hi,
I'm giving the contents of alter log file from the first node...
Mon Feb 19 16:45:59 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 eth1 10.250.90.0 configured from OCR for use as a cluster interconnect
Interface type 1 eth0 10.250.90.0 configured from OCR for use as a public interface
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
IMODE=BR
ILAT =36
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 300
sessions = 335
sga_max_size = 1073741824
sga_target = 1073741824
db_block_size = 8192
compatible = 10.2.0.2.0
log_archive_dest_1 = LOCATION=+BSA_DATA1/bsaprod/
log_archive_format = %t_%s_%r.dbf
db_file_multiblock_read_count= 16
cluster_database_instances= 1
db_create_file_dest = +ORCL_DATA1
instance_number = 1
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=bsaprodXDB)
remote_listener = LISTENERS_BSAPROD
job_queue_processes = 10
background_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/bdump
user_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/udump
core_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/cdump
audit_file_dest = /u01/app/oracle/oracle/admin/bsaprod/adump
db_name = bsaprod
open_cursors = 300
pga_aggregate_target = 262144000
Cluster communication is configured to use the following interface(s) for this instance
10.250.90.107
Mon Feb 19 16:46:00 2007
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=31282
DIAG started with pid=3, OS id=31284
PSP0 started with pid=4, OS id=31286
LMON started with pid=5, OS id=31300
LMD0 started with pid=6, OS id=31315
MMAN started with pid=7, OS id=31317
DBW0 started with pid=8, OS id=31319
LGWR started with pid=9, OS id=31321
CKPT started with pid=10, OS id=31323
SMON started with pid=11, OS id=31325
RECO started with pid=12, OS id=31327
CJQ0 started with pid=13, OS id=31329
MMON started with pid=14, OS id=31331
Mon Feb 19 16:46:00 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=15, OS id=31333
Mon Feb 19 16:46:00 2007
starting up 1 shared server(s) ...
Mon Feb 19 16:46:00 2007
lmon registered with NM - instance id 1 (internal mem no 0)
Mon Feb 19 16:46:01 2007
Reconfiguration started (old inc 0, new inc 2)
List of nodes:
0
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Resources and enqueues cleaned out
Resources remastered 0
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Post SMON to start 1st pass IR
Submitted all GCS remote-cache requests
Post SMON to start 1st pass IR
Reconfiguration complete
Mon Feb 19 16:46:01 2007
CREATE DATABASE "bsaprod"
MAXINSTANCES 32
MAXLOGHISTORY 1
MAXLOGFILES 192
MAXLOGMEMBERS 3
MAXDATAFILES 1024
DATAFILE SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL
SYSAUX DATAFILE SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
SMALLFILE DEFAULT TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
SMALLFILE UNDO TABLESPACE "UNDOTBS1" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
CHARACTER SET WE8ISO8859P1
NATIONAL CHARACTER SET AL16UTF16
LOGFILE GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K
USER SYS IDENTIFIED BY *USER SYSTEM IDENTIFIED BY
Mon Feb 19 16:46:01 2007
Starting background process ASMB
ASMB started with pid=19, OS id=31365
Starting background process RBAL
RBAL started with pid=20, OS id=31369
Loaded ASM Library - Generic Linux, version 2.0.2 (KABI_V2) library for asmlib interface
Mon Feb 19 16:46:05 2007
SUCCESS: diskgroup ORCL_DATA1 was mounted
SUCCESS: diskgroup ORCL_DATA1 was dismounted
Mon Feb 19 16:46:06 2007
SUCCESS: diskgroup ORCL_DATA1 was mounted
Mon Feb 19 16:46:06 2007
Database mounted in Exclusive Mode
Mon Feb 19 16:46:09 2007
Successful mount of redo thread 1, with mount id 3309011657
Assigning activation ID 3309011657 (0xc53b82c9)
Thread 1 opened at log sequence 1
Current log# 1 seq# 1 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Successful open of redo thread 1
Mon Feb 19 16:46:09 2007
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Feb 19 16:46:09 2007
SMON: enabling cache recovery
Mon Feb 19 16:46:09 2007
create tablespace SYSTEM datafile SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL online
Mon Feb 19 16:46:20 2007
Completed: create tablespace SYSTEM datafile SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL online
Mon Feb 19 16:46:20 2007
create rollback segment SYSTEM tablespace SYSTEM
storage (initial 50K next 50K)
Completed: create rollback segment SYSTEM tablespace SYSTEM
storage (initial 50K next 50K)
Mon Feb 19 16:46:24 2007
CREATE SMALLFILE UNDO TABLESPACE UNDOTBS1 DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
Mon Feb 19 16:46:31 2007
Successfully onlined Undo Tablespace 1.
Completed: CREATE SMALLFILE UNDO TABLESPACE UNDOTBS1 DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
Mon Feb 19 16:46:31 2007
create tablespace SYSAUX datafile SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO online
Completed: create tablespace SYSAUX datafile SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO online
Mon Feb 19 16:46:36 2007
CREATE SMALLFILE TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
Completed: CREATE SMALLFILE TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
Mon Feb 19 16:46:36 2007
ALTER DATABASE DEFAULT TEMPORARY TABLESPACE TEMP
Completed: ALTER DATABASE DEFAULT TEMPORARY TABLESPACE TEMP
Mon Feb 19 16:46:36 2007
ALTER DATABASE DEFAULT TABLESPACE SYSTEM
Completed: ALTER DATABASE DEFAULT TABLESPACE SYSTEM
Mon Feb 19 16:46:38 2007
SMON: enabling tx recovery
Mon Feb 19 16:46:39 2007
Threshold validation cannot be done before catproc is loaded.
Threshold validation cannot be done before catproc is loaded.
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=22, OS id=32303
Mon Feb 19 16:46:39 2007
Completed: CREATE DATABASE "bsaprod"
MAXINSTANCES 32
MAXLOGHISTORY 1
MAXLOGFILES 192
MAXLOGMEMBERS 3
MAXDATAFILES 1024
DATAFILE SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL
SYSAUX DATAFILE SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
SMALLFILE DEFAULT TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
SMALLFILE UNDO TABLESPACE "UNDOTBS1" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
CHARACTER SET WE8ISO8859P1
NATIONAL CHARACTER SET AL16UTF16
LOGFILE GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K
USER SYS IDENTIFIED BY *USER SYSTEM IDENTIFIED BY
Mon Feb 19 16:46:39 2007
CREATE SMALLFILE UNDO TABLESPACE "UNDOTBS2" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
Completed: CREATE SMALLFILE UNDO TABLESPACE "UNDOTBS2" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
Mon Feb 19 16:46:46 2007
CREATE SMALLFILE TABLESPACE "USERS" LOGGING DATAFILE SIZE 5M AUTOEXTEND ON NEXT 1280K MAXSIZE UNLIMITED EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO
Completed: CREATE SMALLFILE TABLESPACE "USERS" LOGGING DATAFILE SIZE 5M AUTOEXTEND ON NEXT 1280K MAXSIZE UNLIMITED EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO
Mon Feb 19 16:46:46 2007
ALTER DATABASE DEFAULT TABLESPACE "USERS"
Completed: ALTER DATABASE DEFAULT TABLESPACE "USERS"
Mon Feb 19 16:47:05 2007
Thread 1 advanced to log sequence 2
Current log# 2 seq# 2 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:47:34 2007
Thread 1 cannot allocate new log, sequence 3
Checkpoint not complete
Current log# 2 seq# 2 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 3
Current log# 1 seq# 3 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:48:10 2007
Thread 1 cannot allocate new log, sequence 4
Checkpoint not complete
Current log# 1 seq# 3 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 4
Current log# 2 seq# 4 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:49:05 2007
Thread 1 cannot allocate new log, sequence 5
Checkpoint not complete
Current log# 2 seq# 4 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 5
Current log# 1 seq# 5 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:50:19 2007
Thread 1 cannot allocate new log, sequence 6
Checkpoint not complete
Current log# 1 seq# 5 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 6
Current log# 2 seq# 6 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:51:00 2007
Thread 1 cannot allocate new log, sequence 7
Checkpoint not complete
Current log# 2 seq# 6 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 7
Current log# 1 seq# 7 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:51:54 2007
Thread 1 cannot allocate new log, sequence 8
Checkpoint not complete
Current log# 1 seq# 7 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 8
Current log# 2 seq# 8 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:55:32 2007
Thread 1 cannot allocate new log, sequence 9
Checkpoint not complete
Current log# 2 seq# 8 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 9
Current log# 1 seq# 9 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:56:35 2007
Thread 1 cannot allocate new log, sequence 10
Checkpoint not complete
Current log# 1 seq# 9 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 10
Current log# 2 seq# 10 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:56:52 2007
Thread 1 cannot allocate new log, sequence 11
Checkpoint not complete
Current log# 2 seq# 10 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 11
Current log# 1 seq# 11 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:57:04 2007
Thread 1 cannot allocate new log, sequence 12
Checkpoint not complete
Current log# 1 seq# 11 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 12
Current log# 2 seq# 12 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:57:14 2007
Thread 1 cannot allocate new log, sequence 13
Checkpoint not complete
Current log# 2 seq# 12 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 13
Current log# 1 seq# 13 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:57:31 2007
Thread 1 cannot allocate new log, sequence 14
Checkpoint not complete
Current log# 1 seq# 13 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 14
Current log# 2 seq# 14 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:58:13 2007
Thread 1 cannot allocate new log, sequence 15
Checkpoint not complete
Current log# 2 seq# 14 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 15
Current log# 1 seq# 15 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:59:42 2007
Thread 1 cannot allocate new log, sequence 16
Checkpoint not complete
Current log# 1 seq# 15 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 16
Current log# 2 seq# 16 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:00:33 2007
Thread 1 cannot allocate new log, sequence 17
Checkpoint not complete
Current log# 2 seq# 16 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 17
Current log# 1 seq# 17 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:01:49 2007
Thread 1 cannot allocate new log, sequence 18
Checkpoint not complete
Current log# 1 seq# 17 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 18
Current log# 2 seq# 18 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:02:23 2007
Thread 1 cannot allocate new log, sequence 19
Checkpoint not complete
Current log# 2 seq# 18 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 19
Current log# 1 seq# 19 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:04:06 2007
Thread 1 cannot allocate new log, sequence 20
Checkpoint not complete
Current log# 1 seq# 19 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 20
Current log# 2 seq# 20 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:05:22 2007
Thread 1 cannot allocate new log, sequence 21
Checkpoint not complete
Current log# 2 seq# 20 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 21
Current log# 1 seq# 21 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:06:22 2007
Thread 1 cannot allocate new log, sequence 22
Checkpoint not complete
Current log# 1 seq# 21 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 22
Current log# 2 seq# 22 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:08:42 2007
Thread 1 cannot allocate new log, sequence 23
Checkpoint not complete
Current log# 2 seq# 22 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 23
Current log# 1 seq# 23 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:09:43 2007
Thread 1 cannot allocate new log, sequence 24
Checkpoint not complete
Current log# 1 seq# 23 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 24
Current log# 2 seq# 24 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:10:42 2007
Thread 1 cannot allocate new log, sequence 25
Checkpoint not complete
Current log# 2 seq# 24 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 25
Current log# 1 seq# 25 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:11:31 2007
Thread 1 cannot allocate new log, sequence 26
Checkpoint not complete
Current log# 1 seq# 25 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 26
Current log# 2 seq# 26 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:12:01 2007
Thread 1 cannot allocate new log, sequence 27
Checkpoint not complete
Current log# 2 seq# 26 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 27
Current log# 1 seq# 27 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:13:12 2007
Thread 1 cannot allocate new log, sequence 28
Checkpoint not complete
Current log# 1 seq# 27 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 28
Current log# 2 seq# 28 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:14:05 2007
Thread 1 cannot allocate new log, sequence 29
Checkpoint not complete
Current log# 2 seq# 28 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 29
Current log# 1 seq# 29 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:14:57 2007
Thread 1 cannot allocate new log, sequence 30
Checkpoint not complete
Current log# 1 seq# 29 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 30
Current log# 2 seq# 30 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:16:29 2007
Thread 1 cannot allocate new log, sequence 31
Checkpoint not complete
Current log# 2 seq# 30 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 31
Current log# 1 seq# 31 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:17:54 2007
Starting background process EMN0
EMN0 started with pid=25, OS id=15651
Mon Feb 19 17:17:54 2007
Shutting down instance: further logons disabled
Mon Feb 19 17:17:55 2007
Stopping background process QMNC
Mon Feb 19 17:17:55 2007
Stopping background process CJQ0
Mon Feb 19 17:17:57 2007
Stopping background process MMNL
Mon Feb 19 17:17:58 2007
Stopping background process MMON
Mon Feb 19 17:17:59 2007
Shutting down instance (immediate)
License high water mark = 1
Mon Feb 19 17:17:59 2007
Stopping Job queue slave processes
Mon Feb 19 17:17:59 2007
Job queue slave processes stopped
All dispatchers and shared servers shutdown
Mon Feb 19 17:18:01 2007
ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:18:01 2007
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Feb 19 17:18:03 2007
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Thread 1 closed at log sequence 31
Successful close of redo thread 1
Mon Feb 19 17:18:04 2007
Completed: ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:18:04 2007
ALTER DATABASE DISMOUNT
Mon Feb 19 17:18:04 2007
SUCCESS: diskgroup ORCL_DATA1 was dismounted
Mon Feb 19 17:18:04 2007
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Feb 19 17:18:09 2007
freeing rdom 0
Mon Feb 19 17:18:12 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 eth1 10.250.90.0 configured from OCR for use as a cluster interconnect
Interface type 1 eth0 10.250.90.0 configured from OCR for use as a public interface
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
IMODE=BR
ILAT =36
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 300
sessions = 335
sga_max_size = 1073741824
sga_target = 1073741824
control_files = +ORCL_DATA1/bsaprod/controlfile/current.256.614969167
db_block_size = 8192
compatible = 10.2.0.2.0
log_archive_dest_1 = LOCATION=+BSA_DATA1/bsaprod/
log_archive_format = %t_%s_%r.dbf
db_file_multiblock_read_count= 16
cluster_database_instances= 1
db_create_file_dest = +ORCL_DATA1
instance_number = 1
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=bsaprodXDB)
remote_listener = LISTENERS_BSAPROD
job_queue_processes = 10
background_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/bdump
user_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/udump
core_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/cdump
audit_file_dest = /u01/app/oracle/oracle/admin/bsaprod/adump
db_name = bsaprod
open_cursors = 300
pga_aggregate_target = 262144000
Cluster communication is configured to use the following interface(s) for this instance
10.250.90.107
Mon Feb 19 17:18:13 2007
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=16124
DIAG started with pid=3, OS id=16126
PSP0 started with pid=4, OS id=16128
LMON started with pid=5, OS id=16130
LMD0 started with pid=6, OS id=16132
MMAN started with pid=7, OS id=16134
DBW0 started with pid=8, OS id=16136
LGWR started with pid=9, OS id=16138
CKPT started with pid=10, OS id=16140
SMON started with pid=11, OS id=16142
RECO started with pid=12, OS id=16144
CJQ0 started with pid=13, OS id=16146
MMON started with pid=14, OS id=16148
Mon Feb 19 17:18:13 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=15, OS id=16150
Mon Feb 19 17:18:13 2007
starting up 1 shared server(s) ...
Mon Feb 19 17:18:13 2007
lmon registered with NM - instance id 1 (internal mem no 0)
Mon Feb 19 17:18:14 2007
Reconfiguration started (old inc 0, new inc 2)
List of nodes:
0
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Resources and enqueues cleaned out
Resources remastered 0
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Post SMON to start 1st pass IR
Submitted all GCS remote-cache requests
Post SMON to start 1st pass IR
Reconfiguration complete
Mon Feb 19 17:18:14 2007
ALTER DATABASE MOUNT
Mon Feb 19 17:18:14 2007
Starting background process ASMB
ASMB started with pid=19, OS id=16182
Starting background process RBAL
RBAL started with pid=20, OS id=16186
Loaded ASM Library - Generic Linux, version 2.0.2 (KABI_V2) library for asmlib interface
Mon Feb 19 17:18:18 2007
SUCCESS: diskgroup ORCL_DATA1 was mounted
Mon Feb 19 17:18:23 2007
Setting recovery target incarnation to 1
Mon Feb 19 17:18:23 2007
Successful mount of redo thread 1, with mount id 3309012054
Mon Feb 19 17:18:23 2007
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Mon Feb 19 17:18:23 2007
alter database archivelog
Completed: alter database archivelog
Mon Feb 19 17:18:23 2007
alter database open
Mon Feb 19 17:18:23 2007
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=22, OS id=16393
Mon Feb 19 17:18:23 2007
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=23, OS id=16395
Mon Feb 19 17:18:23 2007
Thread 1 opened at log sequence 31
Current log# 1 seq# 31 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Successful open of redo thread 1
Mon Feb 19 17:18:23 2007
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Feb 19 17:18:23 2007
SMON: enabling cache recovery
Mon Feb 19 17:18:23 2007
ARC0: STARTING ARCH PROCESSES
Mon Feb 19 17:18:23 2007
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
Mon Feb 19 17:18:23 2007
ARC2: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
ARC0: Becoming the heartbeat ARCH
ARC2 started with pid=24, OS id=16422
Mon Feb 19 17:18:23 2007
Successfully onlined Undo Tablespace 1.
Mon Feb 19 17:18:23 2007
SMON: enabling tx recovery
Mon Feb 19 17:18:23 2007
Database Characterset is WE8ISO8859P1
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=25, OS id=16449
Mon Feb 19 17:18:25 2007
Completed: alter database open
Mon Feb 19 17:18:25 2007
ALTER DATABASE ADD LOGFILE THREAD 2 GROUP 3 SIZE 51200K,
GROUP 4 SIZE 51200K
Completed: ALTER DATABASE ADD LOGFILE THREAD 2 GROUP 3 SIZE 51200K,
GROUP 4 SIZE 51200K
Mon Feb 19 17:18:28 2007
ALTER DATABASE ENABLE PUBLIC THREAD 2
Completed: ALTER DATABASE ENABLE PUBLIC THREAD 2
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
Mon Feb 19 17:18:29 2007
Starting background process EMN0
EMN0 started with pid=26, OS id=16564
Mon Feb 19 17:18:29 2007
Shutting down instance: further logons disabled
Mon Feb 19 17:18:29 2007
Stopping background process QMNC
Mon Feb 19 17:18:29 2007
Stopping background process CJQ0
Mon Feb 19 17:18:30 2007
Stopping background process MMNL
Mon Feb 19 17:18:31 2007
Stopping background process MMON
Mon Feb 19 17:18:32 2007
Shutting down instance (immediate)
License high water mark = 3
Mon Feb 19 17:18:32 2007
Stopping Job queue slave processes
Mon Feb 19 17:18:32 2007
Job queue slave processes stopped
All dispatchers and shared servers shutdown
Mon Feb 19 17:18:34 2007
ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:18:34 2007
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Feb 19 17:18:34 2007
Shutting down archive processes
Archiving is disabled
Mon Feb 19 17:18:39 2007
ARCH shutting down
ARC2: Archival stopped
Mon Feb 19 17:18:44 2007
ARCH shutting down
ARC1: Archival stopped
Mon Feb 19 17:18:49 2007
ARCH shutting down
ARC0: Archival stopped
Mon Feb 19 17:18:50 2007
Thread 1 closed at log sequence 31
Successful close of redo thread 1
Mon Feb 19 17:18:51 2007
Completed: ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:18:51 2007
ALTER DATABASE DISMOUNT
Mon Feb 19 17:18:51 2007
SUCCESS: diskgroup ORCL_DATA1 was dismounted
Mon Feb 19 17:18:51 2007
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Feb 19 17:18:56 2007
freeing rdom 0
Mon Feb 19 17:18:59 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 eth1 10.250.90.0 configured from OCR for use as a cluster interconnect
Interface type 1 eth0 10.250.90.0 configured from OCR for use as a public interface
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 300
sessions = 335
sga_max_size = 1073741824
spfile = +BSA_DATA1/bsaprod/spfilebsaprod.ora
sga_target = 1073741824
control_files = +ORCL_DATA1/bsaprod/controlfile/current.256.614969167
db_block_size = 8192
compatible = 10.2.0.2.0
log_archive_dest_1 = LOCATION=+BSA_DATA1/bsaprod/
log_archive_format = %t_%s_%r.dbf
db_file_multiblock_read_count= 16
cluster_database = TRUE
cluster_database_instances= 2
db_create_file_dest = +ORCL_DATA1
thread = 1
instance_number = 1
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=bsaprodXDB)
remote_listener = LISTENERS_BSAPROD
job_queue_processes = 10
background_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/bdump
user_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/udump
core_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/cdump
audit_file_dest = /u01/app/oracle/oracle/admin/bsaprod/adump
db_name = bsaprod
open_cursors = 300
pga_aggregate_target = 262144000
Cluster communication is configured to use the following interface(s) for this instance
10.250.90.107
Mon Feb 19 17:19:00 2007
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=17373
DIAG started with pid=3, OS id=17375
PSP0 started with pid=4, OS id=17377
LMON started with pid=5, OS id=17379
LMD0 started with pid=6, OS id=17381
LMS0 started with pid=7, OS id=17383
LMS1 started with pid=8, OS id=17387
MMAN started with pid=9, OS id=17391
DBW0 started with pid=10, OS id=17393
LGWR started with pid=11, OS id=17395
CKPT started with pid=12, OS id=17397
SMON started with pid=13, OS id=17399
RECO started with pid=14, OS id=17412
CJQ0 started with pid=15, OS id=17428
MMON started with pid=16, OS id=17430
Mon Feb 19 17:19:00 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=17, OS id=17432
Mon Feb 19 17:19:00 2007
starting up 1 shared server(s) ...
Mon Feb 19 17:19:01 2007
lmon registered with NM - instance id 1 (internal mem no 0)
Mon Feb 19 17:19:01 2007
Reconfiguration started (old inc 0, new inc 2)
List of nodes:
0
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Mon Feb 19 17:19:01 2007
LMS 1: 0 GCS shadows cancelled, 0 closed
Mon Feb 19 17:19:01 2007
LMS 0: 0 GCS shadows cancelled, 0 closed
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Post SMON to start 1st pass IR
Mon Feb 19 17:19:01 2007
LMS 1: 0 GCS shadows traversed, 0 replayed
Mon Feb 19 17:19:01 2007
LMS 0: 0 GCS shadows traversed, 0 replayed
Mon Feb 19 17:19:01 2007
Submitted all GCS remote-cache requests
Post SMON to start 1st pass IR
Fix write in gcs resources
Reconfiguration complete
LCK0 started with pid=20, OS id=17460
Mon Feb 19 17:19:02 2007
ALTER DATABASE MOUNT
Mon Feb 19 17:19:02 2007
This instance was first to mount
Mon Feb 19 17:19:02 2007
Starting background process ASMB
ASMB started with pid=22, OS id=17466
Starting background process RBAL
RBAL started with pid=23, OS id=17470
Loaded ASM Library - Generic Linux, version 2.0.2 (KABI_V2) library for asmlib interface
Mon Feb 19 17:19:06 2007
SUCCESS: diskgroup ORCL_DATA1 was mounted
Mon Feb 19 17:19:09 2007
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
Mon Feb 19 17:19:10 2007
Setting recovery target incarnation to 1
Mon Feb 19 17:19:10 2007
Successful mount of redo thread 1, with mount id 3308997510
Mon Feb 19 17:19:10 2007
Database mounted in Shared Mode (CLUSTER_DATABASE=TRUE)
Completed: ALTER DATABASE MOUNT
Mon Feb 19 17:19:11 2007
ALTER DATABASE OPEN
This instance was first to open
Picked broadcast on commit scheme to generate SCNs
Mon Feb 19 17:19:11 2007
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=26, OS id=17679
Mon Feb 19 17:19:11 2007
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=27, OS id=17706
Mon Feb 19 17:19:11 2007
Thread 1 opened at log sequence 31
Current log# 1 seq# 31 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Successful open of redo thread 1
Mon Feb 19 17:19:11 2007
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Feb 19 17:19:11 2007
ARC0: STARTING ARCH PROCESSES
Mon Feb 19 17:19:11 2007
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
Mon Feb 19 17:19:11 2007
SMON: enabling cache recovery
Mon Feb 19 17:19:11 2007
ARC2: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
ARC0: Becoming the heartbeat ARCH
ARC2 started with pid=28, OS id=17708
Mon Feb 19 17:19:11 2007
Successfully onlined Undo Tablespace 1.
Mon Feb 19 17:19:11 2007
SMON: enabling tx recovery
Mon Feb 19 17:19:11 2007
Database Characterset is WE8ISO8859P1
Mon Feb 19 17:19:11 2007
Instance recovery: looking for dead threads
Instance recovery: lock domain invalid but no dead threads
Mon Feb 19 17:19:12 2007
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
Mon Feb 19 17:19:12 2007
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=29, OS id=17735
Mon Feb 19 17:19:13 2007
Completed: ALTER DATABASE OPEN
Mon Feb 19 17:20:11 2007
Shutting down archive processes
Mon Feb 19 17:20:16 2007
ARCH shutting down
ARC2: Archival stopped
Mon Feb 19 17:23:35 2007
Starting background process EMN0
EMN0 started with pid=74, OS id=28350
Mon Feb 19 17:23:35 2007
Shutting down instance: further logons disabled
Mon Feb 19 17:23:36 2007
Stopping background process QMNC
Mon Feb 19 17:23:36 2007
Stopping background process CJQ0
Mon Feb 19 17:23:38 2007
Stopping background process MMNL
Mon Feb 19 17:23:39 2007
Stopping background process MMON
Mon Feb 19 17:23:40 2007
Shutting down instance (immediate)
License high water mark = 34
Mon Feb 19 17:23:40 2007
Stopping Job queue slave processes
Mon Feb 19 17:23:40 2007
Job queue slave processes stopped
All dispatchers and shared servers shutdown
Mon Feb 19 17:24:07 2007
ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:24:07 2007
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Feb 19 17:24:08 2007
Shutting down archive processes
Archiving is disabled
Mon Feb 19 17:24:18 2007
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
ARC1: Archiving disabled
ARCH shutting down
Mon Feb 19 17:24:18 2007
ARC1: Archival stopped
Mon Feb 19 17:24:18 2007
ARC0: Becoming the heartbeat ARCH
Mon Feb 19 17:24:18 2007
ARC0: Archiving disabled
ARCH shutting down
ARC0: Archival stopped
Mon Feb 19 17:24:19 2007
Thread 1 closed at log sequence 31
Successful close of redo thread 1
Mon Feb 19 17:24:19 2007
Completed: ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:24:19 2007
ALTER DATABASE DISMOUNT
Mon Feb 19 17:24:19 2007
SUCCESS: diskgroup ORCL_DATA1 was dismounted
Mon Feb 19 17:24:19 2007
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Feb 19 17:24:25 2007
freeing rdom 0
Mon Feb 19 17:24:35 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 eth1 10.250.90.0 configured from OCR for use as a cluster interconnect
Interface type 1 eth0 10.250.90.0 configured from OCR for use as a public interface
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 300
sessions = 335
sga_max_size = 1073741824
__shared_pool_size = 255852544
__large_pool_size = 4194304
__java_pool_size = 4194304
__streams_pool_size = 0
spfile = +BSA_DATA1/bsaprod/spfilebsaprod.ora
sga_target = 1073741824
control_files = +ORCL_DATA1/bsaprod/controlfile/current.256.614969167
db_block_size = 8192
__db_cache_size = 801112064
compatible = 10.2.0.2.0
log_archive_dest_1 = LOCATION=+BSA_DATA1/bsaprod/
log_archive_format = %t_%s_%r.dbf
db_file_multiblock_read_count= 16
cluster_database = TRUE
cluster_database_instances= 2
db_create_file_dest = +ORCL_DATA1
thread = 1
instance_number = 1
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=bsaprodXDB)
remote_listener = LISTENERS_BSAPROD
job_queue_processes = 10
background_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/bdump
user_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/udump
core_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/cdump
audit_file_dest = /u01/app/oracle/oracle/admin/bsaprod/adump
db_name = bsaprod
open_cursors = 300
pga_aggregate_target = 262144000
Cluster communication is configured to use the following interface(s) for this instance
10.250.90.107
Mon Feb 19 17:24:35 2007
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=29950
DIAG started with pid=3, OS id=29952
PSP0 started with pid=4, OS id=29954
LMON started with pid=5, OS id=29956
LMD0 started with pid=6, OS id=29958
LMS0 started with pid=7, OS id=29960
LMS1 started with pid=8, OS id=29964
MMAN started with pid=9, OS id=29968
DBW0 started with pid=10, OS id=29970
LGWR started with pid=11, OS id=29972
CKPT started with pid=12, OS id=29974
SMON started with pid=13, OS id=29976
RECO started with pid=14, OS id=29978
CJQ0 started with pid=15, OS id=29980
MMON started with pid=16, OS id=29982
Mon Feb 19 17:24:36 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=17, OS id=29984
Mon Feb 19 17:24:36 2007
starting up 1 shared server(s) ...
Mon Feb 19 17:24:36 2007
lmon registered with NM - instance id 1 (internal mem no 0)
Mon Feb 19 17:24:39 2007
Reconfiguration started (old inc 0, new inc 4)
List of nodes:
0 1
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
* domain 0 not valid according to instance 1
* domain 0 valid = 0 according to instance 1
Mon Feb 19 17:24:39 2007
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Mon Feb 19 17:24:39 2007
LMS 1: 0 GCS shadows cancelled, 0 closed
Mon Feb 19 17:24:39 2007
LMS 0: 0 GCS shadows cancelled, 0 closed
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Mon Feb 19 17:24:39 2007
LMS 0: 0 GCS shadows traversed, 0 replayed
Mon Feb 19 17:24:39 2007
LMS 1: 0 GCS shadows traversed, 0 replayed
Mon Feb 19 17:24:39 2007
Submitted all GCS remote-cache requests
Post SMON to start 1st pass IR
Fix write in gcs resources
Reconfiguration complete
LCK0 started with pid=20, OS id=30069
Mon Feb 19 17:24:40 2007
ALTER DATABASE MOUNT
Mon Feb 19 17:24:41 2007
Starting background process ASMB
ASMB started with pid=22, OS id=30121
Starting background process RBAL
RBAL started with pid=23, OS id=30125
Loaded ASM Library - Generic Linux, version 2.0.2 (KABI_V2) library for asmlib interface
Mon Feb 19 17:24:45 2007
SUCCESS: diskgroup ORCL_DATA1 was mounted
Mon Feb 19 17:24:49 2007
Setting recovery target incarnation to 1
Mon Feb 19 17:24:49 2007
Successful mount of redo thread 1, with mount id 3309017062
Mon Feb 19 17:24:49 2007
Database mounted in Shared Mode (CLUSTER_DATABASE=TRUE)
Mon Feb 19 17:24:51 2007
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
Mon Feb 19 17:24:52 2007
Completed: ALTER DATABASE MOUNT
Mon Feb 19 17:24:52 2007
ALTER DATABASE OPEN
Picked broadcast on commit scheme to generate SCNs
Mon Feb 19 17:24:52 2007
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=25, OS id=30406
Mon Feb 19 17:24:53 2007
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=26, OS id=30422
Mon Feb 19 17:24:53 2007
Thread 1 opened at log sequence 31
Current log# 1 seq# 31 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Successful open of redo thread 1
Mon Feb 19 17:24:53 2007
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Feb 19 17:24:53 2007
ARC0: STARTING ARCH PROCESSES
Mon Feb 19 17:24:53 2007
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
Mon Feb 19 17:24:53 2007
SMON: enabling cache recovery
Mon Feb 19 17:24:53 2007
ARC2: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
ARC0: Becoming the heartbeat ARCH
ARC2 started with pid=27, OS id=30436
Mon Feb 19 17:25:07 2007
Successfully onlined Undo Tablespace 1.
Mon Feb 19 17:25:07 2007
SMON: enabling tx recovery
Mon Feb 19 17:25:07 2007
Database Characterset is WE8ISO8859P1
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=29, OS id=30882
Mon Feb 19 17:26:31 2007
Completed: ALTER DATABASE OPEN
Mon Feb 19 17:26:38 2007
ALTER SYSTEM SET service_names='bsaprod','bsatest' SCOPE=MEMORY SID='bsaprod1';
Mon Feb 19 17:26:53 2007
Shutting down archive processes
Mon Feb 19 17:26:58 2007
ARCH shutting down
ARC2: Archival stopped
Mon Feb 19 17:32:16 2007
Error: KGXGN aborts the instance (6)
Mon Feb 19 17:32:16 2007
Errors in file /u01/app/oracle/oracle/admin/bsaprod/bdump/bsaprod1_lmon_29956.trc:
ORA-29702: error occurred in Cluster Group Service operation
LMON: terminating instance due to error 29702
Mon Feb 19 17:32:17 2007
System state dump is made for local instance
System State dumped to trace file /u01/app/oracle/oracle/admin/bsaprod/bdump/bsaprod1_diag_29952.trc
Mon Feb 19 17:32:18 2007
Trace dumping is performing id=[cdmp_20070219173217]
Mon Feb 19 17:32:21 2007
Instance terminated by LMON, pid = 29956
and also the output of crs_stat -t in first node is....
Name Type Target State Host
ora....d1.inst application ONLINE OFFLINE
ora....d2.inst application ONLINE OFFLINE
ora....od1.srv application ONLINE OFFLINE
ora....od2.srv application ONLINE OFFLINE
ora....test.cs application ONLINE OFFLINE
ora.bsaprod.db application ONLINE OFFLINE
ora....SM1.asm application ONLINE UNKNOWN dsrvbd003
ora....ER.lsnr application ONLINE UNKNOWN dsrvbd003
ora....03.lsnr application ONLINE UNKNOWN dsrvbd003
ora....003.gsd application ONLINE UNKNOWN dsrvbd003
ora....003.ons application ONLINE UNKNOWN dsrvbd003
ora....003.vip application ONLINE ONLINE dsrvbd003
ora....SM2.asm application ONLINE OFFLINE
ora....04.lsnr application ONLINE OFFLINE
ora....004.gsd application ONLINE OFFLINE
ora....004.ons application ONLINE OFFLINE
ora....004.vip application ONLINE OFFLINE

Database is not created in SQL server for Persistant Chat

Hi All,
We were deploying the Persistant Chat Lync 2013 Role. We have created the topology and published it. Then the Lync 2013 deployment is done on the Persistant Chat servers, while upgrading the cumulative servers soon after the deployment we are getting the
error as :
Test-CsDatabase : Cannot open database "mgc" requested by the login. The login
failed.
Login failed for user 'domain\username'.
At line:1 char:1
+ Test-CsDatabase -ConfiguredDatabases -SqlServerFqdn
SQL Server ...
Get-MirrorState also was not giving the proper result. Then when I checked in the SQL server, we found that both mgc and mgccomp databases itself not created.
Could someone assist how we can install the database now?? I googled but confused a bit. Servers are already LYNC deployed, so which command and procedure we need to follow to install the DB on SQL servers and also in mirror server.
Never giveup till you get what to want.

Please share Test-CsDatabase -verbose
And Get-MirrorState
in details
PLEASE REMEMBER, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answered"

CRVS2010 beta - Date field from database does not display in report

Hi there - can someone please help?!
I am getting a problem where a date field from the database does not display in the report viewer (It displays on my dev machine, but not on the client machines...details given below)
I upgraded to VS 2010
I am using the CRVS2010 Beta
My development machine is Windows 7 - and so is my fellow developer's
We are using Microsoft SQL Server 2000
We run the queries within VS and then we send the data table to VS using .SetDataSource
We have a few reports which display the date on our dev machines (whether we run the EXE or from within Visual Studio)
When we roll out to the client machines (running Windows XP SP3) then everything works, except that the date does not display (on quite a few reports)
This is the only real issue I have had - a show stopper for me
The rest works well - any input will be greatly appreciated
Regards,
Ridwan

Hi Ridwan,
After much testing I have it all working now using CRDB_adoplus.dll as a data source ( XML )
Alter your Config file to look like this:
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0"/>
</startup>
Then using the code below, and CR requires the Schema to be able to read the date format.
private void SetToXML_Click(object sender, EventArgs e)
CrystalDecisions.CrystalReports.Engine.ReportDocument rpt = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
ISCDReportClientDocument rcd;
rcd = rptClientDoc;
string connString = "Provider=SQLOLEDB;Data Source=dwcb12003;Database=xtreme;User ID=sb;Password=password";
string sqlString = "Select * From Orders";
OleDbConnection oleConn = new OleDbConnection(connString);
OleDbDataAdapter oleAdapter = new OleDbDataAdapter(sqlString, oleConn);
//OleDbDataAdapter oleAdapter2 = new OleDbDataAdapter(sqlString2, oleConn);
DataTable dt1 = new DataTable("Orders");
oleAdapter.Fill(dt1);
System.Data.DataSet ds = new System.Data.DataSet();
// We need the schema to get the data formats
ds.WriteXml("c:
sc.xml", XmlWriteMode.WriteSchema);
//Create a new Database Table to replace the reports current table.
CrystalDecisions.ReportAppServer.DataDefModel.Table boTable = new CrystalDecisions.ReportAppServer.DataDefModel.Table();
//boMainPropertyBag: These hold the attributes of the tables ConnectionInfo object
PropertyBag boMainPropertyBag = new PropertyBag();
//boInnerPropertyBag: These hold the attributes for the QE_LogonProperties
//In the main property bag (boMainPropertyBag)
PropertyBag boInnerPropertyBag = new PropertyBag();
//Set the attributes for the boInnerPropertyBag
boInnerPropertyBag.Add("File Path ", @"C:\sc.xml");
boInnerPropertyBag.Add("Internal Connection ID", "{680eee31-a16e-4f48-8efa-8765193dccdd}");
//Set the attributes for the boMainPropertyBag
boMainPropertyBag.Add("Database DLL", "crdb_adoplus.dll");
boMainPropertyBag.Add("QE_DatabaseName", "");
boMainPropertyBag.Add("QE_DatabaseType", "");
//Add the QE_LogonProperties we set in the boInnerPropertyBag Object
boMainPropertyBag.Add("QE_LogonProperties", boInnerPropertyBag);
boMainPropertyBag.Add("QE_ServerDescription", "NewDataSet");
boMainPropertyBag.Add("QE_SQLDB", "False");
boMainPropertyBag.Add("SSO Enabled", "False");
//Create a new ConnectionInfo object
CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo boConnectionInfo =
new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo();
//Pass the database properties to a connection info object
boConnectionInfo.Attributes = boMainPropertyBag;
//Set the connection kind
boConnectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;
//*EDIT* Set the User Name and Password if required.
boConnectionInfo.UserName = "";
boConnectionInfo.Password = "";
//Pass the connection information to the table
boTable.ConnectionInfo = boConnectionInfo;
//Get the Database Tables Collection for your report
CrystalDecisions.ReportAppServer.DataDefModel.Tables boTables;
boTables = rptClientDoc.DatabaseController.Database.Tables;
//For each table in the report:
// - Set the Table Name properties.
// - Set the table location in the report to use the new modified table
boTable.Name = "Orders";
boTable.QualifiedName = "Orders";
boTable.Alias = "Orders";
rptClientDoc.DatabaseController.SetTableLocation(boTables[0], boTable);
//Verify the database after adding substituting the new table.
//To ensure that the table updates properly when adding Command tables or Stored Procedures.
rptClientDoc.VerifyDatabase();
MessageBox.Show("Data Source Set", "RAS", MessageBoxButtons.OK, MessageBoxIcon.Information);
Thanks again
Don

Database does not exist in the specified path

Just bought a USB 6009 DAQ and for some reason I now keep getting this error: "Database does not exist in the specified path" in VI Logger 2.0.1 it was working. Can anyone help??

Jared,
It sounds like VI Logger somehow lost its association with its
database. Please open MAX and check out the "Historical
Data"->"Citadel 5 Universe" entry. Under "My Computer" in the
right-hand pane, you should have a database called "VI Logger Data". It
must be spelled, spaced, and capitalized the exact same way. If you do
not have this database (which I suspect you do not), right click on "My
Computer" and select "Create/Attach Database..." The default database
path (if you want to have access to your old data) is C:\Documents and
Settings\All Users\Application Data\National Instruments\VI Logger,
with the database name as "VI Logger Data". If you want to create a new
database, then specify a new path.
If "VI Logger Data" does appear, a possible fix is to detach and
reattach it. Right click on "VI Logger Data," select
"Detach/Delete...," and chose the "Detach" option. Finally, reattach
the database as described above.
Hope this helps,
Ryan Verret
Product Marketing Engineer
Signal Generators
National Instruments

Database is not discovered.

Similar Messages

Maybe you are looking for