Database Polling Strategy: Time portion of Date/Time not propogated to BPEL

Hi,
I have a simple BPEL process that uses a last update date polling strategy using a helper table. The table I'm going against is a simple, three column table, as defined below:
CREATE TABLE XXSI_TEST_PRODUCTS
ID VARCHAR2 (32) NOT NULL,
DESCRIPTION VARCHAR2 (32),
LAST_UPDATED DATE
The helper table is as follows:
CREATE TABLE XXSI_PRODUCT_SEQUENCING
TABLE_NAME VARCHAR2 (32),
LAST_UPDATED DATE
The issue I am having is when the adapter picks up the updated rows from the XXSI_TEST_PRODUCTS, that it picks up the date portion of the date datatype fine. (i.e., I can see the value in the audit flow of the BPEL console) However, the time portion of the datatype is always 00:00:00.
Could anyone suggest what the issue is here?
Thanks
Aashish

To add to this earlier note. I can get this to work with the olite database connection, but not Oracle (JDBC) thin driver. Should I be using the Type 2 OCI driver? If so, what should I use?

Similar Messages

UTC Date Time and Normal Date Time

Hi All,
1. How UTC date time and Normal date time differs in siebel.
2. If legacy data needed to be loaded into siebel, in siebel few fields are date time and UTC date time fields. what would happen if we load both normal date time and UTC date time without considering them techinically?
3. UTC date time holds any specific format in physical database? If we want to load legacy data to UTC date time format what is the query to manipulate it?
Thankyou
Sean

Sean,
Please check document below, I believe it has most of the answers to the questions you have:
http://download.oracle.com/docs/cd/E14004_01/books/GlobDep/GlobDepUTC.html
Hope it helps,
Wilson

Error when converting time stamp in date time time zone CST in IC

Hi Experts,
We have recently upgraded from CRM 5.0 to CRM 2007. We are using IC WEB Employee interaction center.
so when agent create service ticket in interaction center and close the ticket on same day we are getting an error saying Error when converting time stamp in date time time zone CST.
we thought there may be problem while installing SAP CRM by basis team in time zone, but we did not find any problem.
So please advice how to resolve this issue.
Regards,
Teja

Hi Teja,
I saw a similar message, and it was resolved by adding a timezone to the user profile defaults tab in SU3. I believe the system has been configured to convert between users' timezone and the system timezone, therefore it needs to know each users' timezone.
Regards,
Simon.

Select Records between Begin Date/Time and End Date/Time

Hi, I need to select records from table GLPCA where the CPUDT and CPUTM are between a START DATE/TIME and END DATE/TIME.
I have the below logic from an SAP Solution, but it doesn't seem to be working right in my opinion. It is picking up records earlier than the date ranges. Can anyone tell me how I might be able to accomplish this? I'm hoping this is an easy one for the ABAPPERs...
Thanks,
START DATE 20091022
START TIME 125736
END DATE 20091022
END TIME 135044
CPUDT 20091022
CPUTM 100257
      SELECT * FROM GLPCA
         WHERE ( CPUDT >= STARTDATE AND ( CPUTM >= STARTTIME OR ( CPUDT <= ENDDATE AND CPUTM <= ENDTIME ) ) ).

Thank you all! I ended up using the following:
SELECT * FROM GLPCA
          WHERE RYEAR IN L_R_RYEAR
            AND ( ( CPUDT = STARTDATE AND CPUTM >= STARTTIME ) OR CPUDT > STARTDATE )
            AND ( ( CPUDT = ENDDATE   AND CPUTM <= ENDTIME )   OR CPUDT < ENDDATE ).
This child was born from the following thread that was found:
update date and time of client record

Convert labview date/time to excel date/time

How do I convert the "seconds since 1904" from the function "Get Date/Time in Seconds" to an MS Excel date/time format? The application runs in the Solaris environment.

hi, I am not sure about Solaris env.
Maybe this will help in one way or another.
Regards
ian.f
Sg/My
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com
Attachments:
GetDatenTime_to_File.vi ‏48 KB

Automatically displaying date and time in a date/time field on form initialize

Good day all;
I am trying to have the current date and time automatically be generated in a “date/time” field when the form is opened.
I went through the forum and found an entry from Srini “ xfa.host.messageBox("" + Date());” . Of course this brought up a system message box with the date and time.
I then tried “DateTimeField1.rawValue = (“”+date())… This also gave me a system message box with the date and time…
Please let me know where I am going wrong
Chomp

Found the answer... And yes... in was in the "help" section... What can I say I was making it a lot more crazy than I needed to.
You can use a date/time field to automatically show the current date by using the Runtime Property option in the Value tab of the Object palette.
When using a current date field, the date updates to reflect the system’s current date each time a user opens the form.
1.
In the Library palette, click the Standard category and drag a Date/Time Field object onto the form design.
2.
In the Object palette, click the Value tab and select Calculated - Read Only from the Type list.
3.
Select the Runtime Property option.
4.
View the form in the Preview PDF tab.

Integration with Outlook - how to increment end date and time from start date/time

Hi,
I want to add a variable amount of time to an appointment start date and time in outlook, through vba in access. Code below shows what I've done:
======================================
Dim olApp As New Outlook.Application
Dim olAppointment As AppointmentItem
Dim myRequiredAttendee As Outlook.Recipient
Set olAppointment = olApp.CreateItem(olAppointmentItem)
With olAppointment
.Start = DateValue(strStartDate) + TimeValue(strStartTime)
.Duration = intDuration
.End = DateValue(strStartDate) + ????????
=======================================
What do I replace the ????? with so that it increments the start time by any duration I decide in minutes? Using the duration doesn't seem to work and I also want to be able to have the appointment span a number of days, e.g. could start at 930am on
Monday and end at 10am on Weds, but want to set the end time relative to the start time.
Thanks,
Chris.
_________________________________________________________ Every day is a school day!

I've tried that, but it throws out a datatype mismatch error :(
It would be helpful if you posted the exact code you tried. In my tests, setting teh .Duration property appears to work. However, if you want to set the .End property to a specific number of minutes after the date/time of the .Start property,
this works for me:
With olAppointment
.start = DateValue(strStartDate) + TimeValue(strStartTime)
.End = .start + TimeSerial(0, intDuration, 0)
End With
Assuming, that is, that intDuration contains the number of minutes the appointment should last.
Dirk Goldgar, MS Access MVP
Access tips: www.datagnostics.com/tips.html

About My Time Zone in Date & Time Settings?

My iMac in System Preferences where they have The Date & Time, well My Time Zone can't Determine My Current Location ever since last night when I they had there Security Update, what do I Do? or is Apple have Problems right now?

it sometimes happens that it cannot determine the location. but it remembers the last location it got, so if you don't move between time zones all the time it doesn't really matter if it can determine your location right now.
also, make sure you are connected to the internet when attempting to determine the location.

Sorting photos by date/time taken, when date/time created is not an option?

I'm so sorry if this has been answered elsewhere, but I can't find it on Google or in the forums...
I need to sort wedding photos from multiple photographers by date taken so I can sort through the wedding as a full event. Sorting by the date/time the file was created will not suffice because I had to convert all photos from one of my photogs from NEF to DNG (D610 files not compatible with CS5), so the 'date created' for those DNG file is days later than all the other images. Thus, sorting by "date created' batches all the photos from one of my photogs together at the end.
Is there any option in Bridge that will actually read the metadata and sort by the shoot time of the image?
Thanks for any help!

There has been a known bug in PSE9 although only affecting raw images and caused by the Camera Raw 6.4 update. The timestamp gets changed by one hour each time an image is modified. I don’t know if your issue is related but the work around is to revert to ACR 6.3
http://kb2.adobe.com/cps/915/cpsid_91582.html
The only other work around is to temporarily switch to folder location view, if your images were imported from a single folder. Click on the display button (near top right in Organizer) to change the browser view. If you click on the folder in the left hand pane the files will normally be in sequential file name order which usually mirrors the date/time taken. From the folder location it’s possible to create an instant album, which can then be used as the basis of a slideshow.

Function module for converting German Data/Time to Indian Date/Time

Dear All,
My requirement is to convert German date and time to Indian date and time. Is there any function module available or any way we can get it?
Thanks and regards,
Atanu

hi,
first get the timezone of that country
CALL FUNCTION 'TZON_LOCATION_TIMEZONE'
      EXPORTING
        if_country        = p_it_userid-zcountry
      IMPORTING
        ef_timezone       = l_tzone
      EXCEPTIONS
        no_timezone_found = 1
        OTHERS            = 2.
then use the below statements
-- Convert from server time to GMT
      CLEAR l_tstmp.
      CONVERT DATE l_datum
              TIME l_ctime
         INTO TIME STAMP l_tstmp TIME ZONE sy-zonlo.
*-- Convert from GMT to user backup time
      CONVERT TIME STAMP l_tstmp TIME ZONE it_usr_timezone-ztzone
        INTO DATE it_usr_timezone-zdate
             TIME it_usr_timezone-ztime.

ABAP statement for converting UTC date/ time to local date/time

Hi
Is there any abap statement or any function module in BW which converts UTC date and UTC
time into local date and local time according to specific country.
Regards,
Kate

Hi,
and to convert the country to a timezone first use: TZ_LOCATION_TIMEZONE
/manfred

Convert Date Time field to Date & Time

Post Author: Smita
CA Forum: Crystal Reports
I am new to Crystal XI . I need to convert DateTime ("2007/04/04/04 09:49:05:00") format to Date and Time and then group a months data first by date and then by Time ( per Hour ).
If someone can help ?
Thanks

Post Author: newcruser
CA Forum: Crystal Reports
Thanks
This is easy...second group based on the second formula 'for each hour'.
How you group by 15 minutes?.
i want to group by every 15 minutes starting from 9 AM to 5 PM.
First i need to create a time range and then use that time range to group?. Or any other simple and best way to solve this?. Please help
How to create time range from 9 AM to 5 PM?

Convert date time to file date time

Hi,
I have standard delphi function which conver datetime to filedatetime here is the description
function DateTimeToFileDate(DateTime: TDateTime): Integer;
Description
Use DateTimeToFileDate to convert a TDateTime value, which is the representation of date-and-time values used by the VCL, to a DOS date-and-time value.
For example, use DateTimeToFileDate to convert a TDateTime value to a
format that can be used as the Age parameter of FileSetDate. You may
also need to use DateTimeToFileDate to convert a TDateTime so that it
is compatible with the Time field of the TSearchRec record used by the FindFirst
and FindNext functions.
Lo returns the low-order Byte of the argument X as an unsigned value. X is an expression of type Integer.
Use Hi to obtain the high-order byte of an expression of type Word or Integer.
Note: Hi treats Integer as a 16-bit value, even if it is 32-bit.
This is the delphi code that convert the date
year=2003
month=5
day=28
sec=57
min=45
hr=13
msec=107
LongRec(Result).Lo := (Sec shr 1) or (Min shl 5) or (Hour shl 11);
LongRec(Result).Hi := Day or (Month shl 5) or ((Year - 1980) shl 9);
output Result is --> 784100796
Any help will be highly appreciated.
Thanks.

You use the java.util.GregorianCalendar to extract month, day, etc from a date.
Then you use the shift operator ('<<') to construct the number.

How do it force a user to enter a time in a date time field??

I am new to live cycle, not to acrobat pro. I must say live cycle is pretty cool and i may just switch to live cycle forever...
But i can not figure this out. I have a HR form. I need to make the time of occurence field, required, validate and wont let you move on until you enter a time.
Right now it functions as required, it shows a custom message, but the user can enter garbage text and skip through. How do i set up this field where the user can only enter a time and not skip through??
I am sure this is rather easy, i just dont know where to start.. Thanks in Advance

Hi Paul:
That completely makes sense... Only problem what would or could the javascript be??
I have already inserted some for the save as and print buttons sucessfully
BTW in my form the time/date field is selected and to format to show time only. In my other date fields is does show a calendar after you hit the little arrow and the user can still insert garbage.
What i would ultimately want is for the user not to insert garbage and forcing them to insert a time in the time field.
It is possible that i forgot or missed a step being as im new to Live Cycle.

I want to run SSIS package every time based on last time job processed data time.........

Hi all,
i have SSIS package ..its needs run every day .for that we were schedule a job for ssis..
but we need when package going to run that time we have to take data, besed on last time processed date..for that am using msdb data base to get process date ..but am not yet schedule a job am going to do 1st time..
insde the package am using this query using execte sql task
SELECT CASE WHEN DateDiff(Day, CONVERT(DATETIME, LEFT(MAX(H.run_date), 8)), GetDate()) = 0 THEN 30 ELSE DateDiff(Day, CONVERT(DATETIME, LEFT(MAX(H.run_date), 8)), GetDate()) END AS Dates
FROM dbo.sysjobhistory AS H INNER JOIN
dbo.sysjobs AS J ON H.job_id = J.job_id
WHERE (H.run_status = 1) ..
if job already ran means its was working fine.if job not yet scheduled means its giving error...
pandiyan

Try this one on:
SELECT COALESCE(dates,fallBack) AS dates, name
FROM (
SELECT 30 AS fallBack
) b
LEFT OUTER JOIN (
SELECT CASE WHEN DateDiff(Day, CONVERT(DATETIME, LEFT(MAX(H.run_date), 8)), GetDate()) = 0 THEN 30
ELSE DateDiff(Day, CONVERT(DATETIME, LEFT(MAX(H.run_date), 8)), GetDate())
END AS Dates,
j.name
FROM dbo.sysjobhistory AS H
INNER JOIN dbo.sysjobs AS J
ON H.job_id = J.job_id
WHERE H.run_status = 1
GROUP by j.name
) a
ON b.fallBack = b.fallBack
You might want to consider filtering on j.name or j.job_id to get the info for the specific job.

Database Polling Strategy: Time portion of Date/Time not propogated to BPEL

Similar Messages

Maybe you are looking for