Database recover fail

Hi Gurus
When I was starting my database I found it failed and asked for media recovery , I did it despite that not able to recover
My database oracle 10.2.0.3
OS : AIX
Error is as under :
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: '/oradata/pblprod/system01.dbf'
SQL> recover datafile 1;
ORA-00279: change 68423924625 generated at 03/09/2012 13:24:30 needed for thread 1
ORA-00289: suggestion : /archivefs/pblprod/pblprod_arch_1_50365_687531539.arc
ORA-00280: change 68423924625 for thread 1 is in sequence #50365
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
/archivefs/pblprod/pblprod_arch_1_50365_687531539.arc
ORA-00283: recovery session canceled due to errors
ORA-00368: checksum error in redo log block
ORA-00353: log corruption near block 9379976 change 68425552562 time 03/09/2012 16:02:25
ORA-00334: archived log: '/archivefs/pblprod/pblprod_arch_1_50365_687531539.arc'
ORA-01112: media recovery not started
SQL>
Regards
Rabi

Hi,
What you want to show from the thread .... I didn't get ...
>
SQL> startup mount
ORACLE instance started.
Total System Global Area 368263168 bytes
Fixed Size 1374668 bytes
Variable Size 230688308 bytes
Database Buffers 130023424 bytes
Redo Buffers 6176768 bytes
Database mounted.
SQL> alter system switch logfile;
alter system switch logfile
ERROR at line 1:
ORA-01109: database not open
>
--neeraj

Similar Messages

Database Refresh Failed

Hi All,
I am working on a database refresh and it failed with the following errors
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 04/15/2011 16:27:41
RMAN-03015: error occurred in stored script Memory Script
ORA-00283: recovery session canceled due to errors
RMAN-11003: failure during parse/execution of SQL statement: alter database recover logfile '/srv/database/arch2/1_65508_689972797.dbf'
ORA-00283: recovery session canceled due to errors
ORA-00368: checksum error in redo log block
ORA-00353: log corruption near block 256 change 43879018791 time 04/12/2011 04:30:54
ORA-00334: archived log: '/srv/database/arch2/1_65508_689972797.dbf'
Do you have any idea of how to solve this error.
Please help.

Hi;
What is your OS? If its solaris than please see:
Duplicate Fails with Corruption Errors on Solaris QFS Filesystem [ID 764113.1]
Regard
Helios

CR XI R2 "Database Login Failed" Recycled application pool and now it works

Hello,
I have a web application using CR XI R2 that has several reports which are pushed a dataset. These reports have been runing fine until today when I received an error stating "Database login failed." "Object reference not set to an instance of an object" in the report viewer control.
I recycled the application pool and the reports started working again.
My questions are:
What could be the cause of this and how can it be avoided?
Why does recycling the application pool correct the problem?
Regards.

Hi Tom,
Recycling keeps problematic applications running smoothly, especially when it is not feasible to modify the application code. Recycling helps ensure that problematic applications do not cause other applications to fail, and that system resources can be recovered from unhealthy applications.
Recycling an application pool causes the WWW service to shut down all running worker processes that are serving the application pool, and then start new worker processes. Whether the WWW service starts the new worker processes before it stops the existing one depends on the DisallowOverlappingRotation property in the metabase. Recycling an application pool does not alter any state in HTTP.sys or change any configuration in the metabase.
Note:
When an application pool is serviced by more than one worker process, the recycle operation is staggered in some scenarios. Only when a worker process is recycled on demand or when all of the worker processes hit their memory limits at the same time would they be restarted simultaneously.
For more info regarding this have a look to this [article|http://blogs.msdn.com/david.wang/archive/2006/01/26/Thoughts-on-Application-Pool-Recycling-and-Application-Availability.aspx]
Regards,
Shweta

Exchange Add Mailbox Database Copy fails.

I'm recovering from a server failure on my Exchange System and while I've been able to rebuild the server an integrate it into the Exchange System and the DAG. When I attempt to replicate any of the databases, it fails. It creates a directory on the new Exchange server in the right place, but the database isn't there and I get the following error:--------------------------------------------Summary: 1 item(s). 0 succeeded, 1 failed.Elapsed time: 00:00:23AM.ScottFailedError:A source-side operation failed. Error An error occurred while performing the seed operation. Error: Failed to open a log truncation context to source server 'FRANKLIN2.domain.com'. Hresult: 0x80070057. Error: An unexpected error occurred. Error (0x80070057).. [Database: AM.Scott, Server: FRANKLIN0C.domain.com]Failed to open a log truncation context to source server...
This topic first appeared in the Spiceworks Community

Hi Belinda,
Thanks for the response. I am holding off on using Eseutil or Isinteg for now as I may have finally found the problem.
I was reading another forum yesterday where someone else was getting many of the same errors and everyone responding was telling them the same thing, to check the database as it seemed to have some corruption. Then there was one post at the very bottom where
a guy said he had the same problems but found it was an incompatibility with Exchange 2010 and the Windows Serve Backup Command-line Tools for Server 2008. He removed the Command-line Tools and the problem was resolved. Since we do not use the Windows Serve
Backup, we use Backup Exec, I decided to give it a try. I removed the Command-line Tools and reseeded the database. It has been running since about 12:30 PM yesterday with no errors at all. I'm not claiming victory yet as I stated in my original post that
it has at times run for up to 5 days before failing. I will monitor it for the next week and keep my fingers crossed that the issue has been resolved. I will report back if it fails before then and if not I will consider the issue resolved and post to
the thread.
If this does in fact turn out to be the solution it is just another instance of Microsoft dropping the ball as I was only able to find this mentioned once on their website in a thread about Exchange logs not truncating. I would find it rather annoying their
Server backup software is incompatible with their Mail program and even more annoying that they have not acknowledged the issue. I have been fighting this for months and only found the solution by a stroke of luck. I will update accordingly.
Many thanks,
Gerard

Creating new Data Source Error - Database connection Failed

Successfully installed and configured 11.1.1.3.0. Planning and Essbase dev.
Went to Workspace > Administer > Classing Planning Administration > Manage Data Sources > Create Data Source.
Entered all info about the application database , etc. Getting error "The database connection failed" (I was able to connect with no problem during the install)
SQL server 2005 is on the same physical server.
The diagnostic tool shows database connection passed for planning. A new database was created for the new application.
The server event viewer shows these errors.
"Login failed for user 'xxx-hyperion'. The user is not associated with a trusted SQL Server connection."
Group Policy Error "The client-side extension could not apply computer policy settings for 'Default Domain Policy {xxx}' because it failed with error code '0x80070003 The system cannot find the path specified.' See trace file for more details. "
The Group Policy client-side extension Group Policy Services failed to execute. Please look for any errors reported earlier by that extension.
Any help is appreciated.

Datasource for the application.
I have created a sql db for this planning application (my datasource). See my first message for more details.
When you create a new planning application, you need to associate it with a data source. Since this is a new install, I don't have any data sources available yet.
So, "To create, edit or delete data sources, click Manage Data Source."
This page lets you validate your connection to the database and essbase server. My essbase server connection validates! The database connection does not validate after I enter all the relevant information.
SCREEN INFO BELOW
Fields displayed with an asterisk (*) are mandatory.
Data Source Name *:
Data Source Description:
Select Database Platform
Microsoft SQL Server
Application Database
Server * :
Port * :
Database *:
User *:
Password *:
Click "Validate Database Connection"
ERROR ---> Database connection failed.
So it does not let me create a data source for my new planning application, so I cannot create a new planning application.
Thanks in advance.

JDBC Adapter - Established database connection failed

Hi Guys,
we have installed the JDBC Adapter based on the How To Guide and we checked after the installation the Libaries :Cluster --> Server --> Libraries --> com.sap.aii.af.jmsproviderlib and the box Box "JARs Contained" was filled.
So in my point of view we have done everything right during the installation.
Now the developer tested theJDBC Adapter and he comes back with following Error:
Attempt to establish database connection failed with SQL error com.sap.aii.adapter.jdbc.sql.DriverManagementException: Cannot establish connection to URL "jdbc:microsoft:sqlserver://xxx.x.xx.xxx:1433; databaseName=CZZ03;":ClassNot FoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver
Do you have any ideas?
Regards
Markus

Hello Markus,
To install JDBC driver follow the how to guide.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
Configuration of JDBC Adapter for SQL Server
JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
UserID and Password.
If the connection is not working find the correct port number.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Thanks,
Satya Kumar
Reward Points If it is Useful..

Database Logon Failed after first report

I have a Windows Server 2003 x86 server running IIS6 and ASP.NET. On this server, I have two different web forms set up to export Crystal Reports to PDF.
My problem is that only one of these reports can run. For example, I open report 1 and can then reopen (generate PDF of) report1 as many times as I want. I cannot open report 2 - I get a "Database Logon Failed" error message. If I restart the server, I can generate a PDF of report 2 successfully and as many times as I want but report 1 will get a "Database Logon Failed" error message.
Has anyone seen this behavior before? My code is very concise and manually closes the report document (and forces the garbage collection to run) once the PDF has been generated. However, for some reason, the report is staying in memory and is trying to run again even though it has been closed. It is driving me crazy.
Thanks in advance for any assistance you can offer.

Let's get the server confusion out of the way.
A "server" runtime install is an msi file called CrystalReports11_5_NET_2005.msi.
The msi is in a download called Crystal Reports XI Release 2 - FP x.x .NET Server Install (where x.x refers to SP or FP version (e.g.; Crystal Reports XI Release 2 - FP 5.6 .NET Server Install)
So, this gives you an easy way of installing the CR runtime on a server (e.g.. Win 2003 server). No CR server (RAS) implication here. To install the runtime, all you have to do is run the msi, provide the keycode when prompted and the runtime is installed. You should see the directory C:\Program Files\Business Objects\Common\3.5\bin created. No pretty interface, etc. If you want a pretty interface, you create your own setup project or msi using the CR msm files.
Hopefully this clears up the "server" confusion.
To the actual issue on hand.
You say this works with older "Crystal Reports viewers" installed on a WIN 2003 64 bit server. My question is; does this CR XI r2 based app work anywhere? Your dev box? Staging server?
Ludek

Crystal reports "Database login failed" when using push method

I have a web application (ASP.NET, .NET v3.5), that pushes data to a CR 2008 report. On two servers one of the three reports returns a "Database login failed" error. I am stumped since there is no login, it's push not pull; in addition the problem is hard to debug since it works fine from my developers workstation. I have "updated" the xsd in that report, reinstalled the app, etc., non of which helped. If anyone has a solution or even ideas I'd appreciate the help.

What about following the troubleshooting steps as described in the blog;
Create an XML file off of your dataset. Make sure this is done just before you set the dataset to the report:
rpt.Load(rptPath)
myDataset.WriteXml(xmlPath, XmlWriteMode.WriteSchema)
rpt.SetDataSource(myDataset)
Copy the above created XML to your development system
Open the problem report in the Crystal Reports designer
In the Desigger, go to the Database menu and select u201CSet Datasource Locationu201D
In the u201CReplace with:u201D pane, expand the u201CCreate New Connectionu201D folder.
Double click the u201CADO .NET (XML)u201D icon
Browse to the location of the XML file you created in step (1)
Click on the path to the XML. The <Update> button should enable
Click on the <Update> button
Typically, either of the following will happen:
You will get a u201CMap Fieldsu201D dialog. This indicates that the XML written off of your dataset does not match what the report is expecting. This may be due to incorrect fields name, incorrect field type, etc. You will now need eliminate the difference.
Incorrect data or no data. There is an issue with your dataset and you need to determine why the data is not present in your dataset. Looking at the XML may be a good place to start.
Ludek

Database logon failed. Database Vendor Error Code: 0

Hi all,
I'm running a java web application and use crystal report XI.
It works normally. One thing is : i would like to change the "Connection URL" when runtime.
These are my config:
_CRConfig.xml :
<?xml version="1.0" encoding="utf-8"?><CrystalReportEngine-configuration>
    <reportlocation>../..</reportlocation>
    <timeout>10</timeout>
    <ExternalFunctionLibraryClassNames>
          <classname> </classname>
          <classname> </classname>
    </ExternalFunctionLibraryClassNames>
<keycode>B6W60-01CS200-00GEGC0-0EX1</keycode>
<Javaserver-configuration>
<DataDriverCommon>
     <JavaDir>C:\Business Objects\j2sdk1.4.2_08\bin</JavaDir>
    <Classpath>C:\Business Objects\Common\3.5\java/lib/crlovmanifest.jar;C:\Business Objects\Common\3.5\java/lib/CRLOVExternal.jar;C:\Business Objects\Common\3.5\java/lib/CRDBJavaServerCommon.jar;C:\Business Objects\Common\3.5\java/lib/CRDBJavaServer.jar;C:\Business Objects\Common\3.5\java/lib/CRDBJDBCServer.jar;C:\Business Objects\Common\3.5\java/lib/CRDBXMLServer.jar;C:\Business Objects\Common\3.5\java/lib/CRDBJavaBeansServer.jar;C:\Business Objects\Common\3.5\java/lib/external/CRDBXMLExternal.jar;C:\Business Objects\Common\3.5\java/lib/external/log4j.jar;C:\Business Objects\Common\3.5\java/lib/cecore.jar;C:\Business Objects\Common\3.5\java/lib/celib.jar;C:\Business Objects\Common\3.5\java/lib/ebus405.jar;C:\Business Objects\Common\3.5\java/lib/corbaidl.jar;C:\Business Objects\Common\3.5\java/lib/external/freessl201.jar;C:\Business Objects\Common\3.5\java/lib/external/asn1.jar;C:\Business Objects\Common\3.5\java/lib/external/certj.jar;C:\Program Files\Business Objects\Common\3.5\java/lib/external/jsafe.jar;C:\Business Objects\Common\3.5\java/lib/external/sslj.jar;C:\tomcat\common\lib\oracle-driver.jar${CLASSPATH}</Classpath>
     <IORFileLocation>${TEMP}</IORFileLocation>
     <JavaServerTimeout>1800</JavaServerTimeout>
     <JVMMaxHeap>256000000</JVMMaxHeap>
     <JVMMinHeap>32000000</JVMMinHeap>
     <NumberOfThreads>100</NumberOfThreads>
</DataDriverCommon>
<JDBC>
     <CacheRowSetSize>100</CacheRowSetSize>
     <JDBCURL>jdbc:mysql://Komodo-vmw:3306/warcraft</JDBCURL>
     <JDBCClassName>com.mysql.jdbc.Driver</JDBCClassName>
     <JDBCUserName>root</JDBCUserName>
     <JNDIURL></JNDIURL>
     <JNDIConnectionFactory></JNDIConnectionFactory>
     <JNDIInitContext>/</JNDIInitContext>
     <JNDIUserName>weblogic</JNDIUserName>
     <GenericJDBCDriver>
          <Default>
               <ServerType>UNKNOWN</ServerType>
               <QuoteIdentifierOnOff>ON</QuoteIdentifierOnOff>
               <StoredProcType>Standard</StoredProcType>
               <LogonStyle>Standard</LogonStyle>
          </Default>
          <Sybase>
               <ServerType>SYBASE</ServerType>
               <QuoteIdentifierOnOff>OFF</QuoteIdentifierOnOff>
               <DriverClassName>com.sybase.jdbc2.jdbc.SybDriver</DriverClassName>
               <StoredProcType>Standard</StoredProcType>
               <LogonStyle>MySQL</LogonStyle>
          </Sybase>
     </GenericJDBCDriver>
</JDBC>
<XML>
     <CacheRowSetSize>100</CacheRowSetSize>
     <PreReadNBytes>4096</PreReadNBytes>
     <XMLLocalURL></XMLLocalURL>
     <SchemaLocalURL></SchemaLocalURL>
     <XMLHttpURL></XMLHttpURL>
     <SchemaHttpURL></SchemaHttpURL>
</XML>
<JavaBeans>
    <CacheRowSetSize>100</CacheRowSetSize>
     <JavaBeansClassPath></JavaBeansClassPath>
</JavaBeans>
</Javaserver-configuration>
</CrystalReportEngine-configuration>
_JSP file :
public ConnectionInfos setLogon() {
          String dbUser = "root";
          String dbPassword ="root";
          ConnectionInfos oConnectionInfos=null;
           try
                //Create a new ConnectionInfos and ConnectionInfo object;
                oConnectionInfos = new ConnectionInfos();
              ConnectionInfo oConnectionInfo = new ConnectionInfo();
              //Set username and password for the report's database
              oConnectionInfo.setUserName(dbUser);
              oConnectionInfo.setPassword(dbPassword);
          PropertyBag pro = new PropertyBag();
              Map<String, String> bag = new HashMap<String, String>();
               bag.put("Connection URL", "jdbc:mysql://Komodo-vmw:3306/warcraft");
               bag.put("Server Type", "JDBC (JNDI)");
               bag.put("Database DLL", "crdb_jdbc.dll");
               bag.put("Database Class Name", "com.mysql.jdbc.Driver");
              oConnectionInfo.setAttributes(new PropertyBag(bag));
              //Add object to collection
              oConnectionInfos.add(oConnectionInfo);
          } catch(Exception se) {
               se.printStackTrace();
               System.out.println("[error in setLogon ]");
          return oConnectionInfos;
And i got error every times i run the report :
Database logon failed. Database Vendor Error Code: 0
Please help me.Thank you so much!

Hi quang.
can u tell me how to solve this issue? on trying to open a report am facing this issue!
TIA

Xcelsius - Database logon failed. (LO 26603)

Hi Expert,
I have a error when run .swf file.
The first, I create new query from SAP toolbar integration in Crystal Report 2008. The Crystal Query is called from a BW Query . The query have not variables, the data get directly from BW Query.
I saved Crystal Report file into BOE (File -->Save -->Enterprise, not save on BW).
In Infoview, I setup schedule for this .rpt file with information database logon below (default as inform in Set Database Location of Crystal Report):
- Database server: xxx.xxx.xxx.xxx (BW server)
- User name: User in BW
- Password: Password in BW
In Xcelsius, I use Live Office to get data from crystal on BOE to Excel sheet on Xcelsius.
In data-->Connection, I changed <server:8080> by <IP BOE System:8080>.
When I preview or export to swf file, a message box appear require input user name and password of BW server (Database logon). After I input correct password, a message box User Identification appear, I input System, User name, Password on BOE server and chose Authentication Enterprise. And final, I get error message " Database logon failed. (LO 26603)".
I try opening Crystal Report file on Infoview and Refresh data, I also input database logon by BW User, the data refresh correctly.
Why do crystal report file update data from BW correct, while .swf file is not and return error Database Logon failed.
Please explain for me what step I missed to get data through Live Office.
Thanks

Hi Priya,
Thanks for your support.
I have set the default credentials in database configuration.
But my dashboard still can't work. When I preview dashboard, A prompt for database logon information appear, I can logon sucess and refresh data. But after I logon username and password on BOE for BOE User Identification with Authentication Enterprise, I still get error " Database logon failed".
Who can explain for me what steps I miss.
Thanks

Issue while installing WCS using omii.ini: Database ping failed

Hi,
I am trying to install WCS on local linux VM. I am following the document 'Oracle WebCenter Sites: Installing on Oracle WebLogic Application Server".
Following are the things I have been able to do successfully:
Install Oracle DB, create a database and then create a user for this database
Install WebLogic server, create domain, create admin server, managed server, and finally create a datasource. THe datasource connection to the DB created in step 1 above is successfull.
I downloaded the WCS installer from Oracle Website 'WebCenterSites_11.1.1.6_bp1'. I am installing using silent installer using omii.ini file.
During installation, on receiving the prompt to install CS and CAS applications, I installed them successfully via WebLogic console.
I tested the URL 'http://localhost:7001/cs/HelloCS' and it showed me the Oracle WCS 11g page.
Now, when I go back to the wcs installation terminal and hit Enter, it gives following error:
[2013-07-11 01:32:21.861][CS.INSTALL][INFO] 1. If your platform requires you to manually deploy the Sites application, deploy Sites now. Otherwise, continue with step 2 2. Restart your application server. 3. Test the URL http:////HelloCS to see if application is deployed successfully 4. If the test is successful, press ENTER. URL http://localhost:7001/cs/HelloCS [2013-07-11 01:41:16.841][CS.INSTALL][INFO] CSSetupEngine.testConnectionAction: Testing user configuration and database connectivity. [2013-07-11 01:41:17.118][CS.INSTALL][INFO] CSSetupEngine.postURL: PostURL success for http://localhost:7001/cs/HelloCS [2013-07-11 01:41:17.118][CS.INSTALL][INFO] CSSetupEngine.testConnectionAction: Web Server and Application Server Configuration test finished successfully. [2013-07-11 01:41:17.118][CS.INSTALL][INFO] CSSetupEngine.testConnectionAction: Attempting to Ping the Database. [2013-07-11 01:41:17.459][CS.INSTALL][ERROR] CSSetupEngine.doPing: Database Ping Failed. Make sure your application server and web server are running. Response received = HTTP/1.1 200 OK HOST_SERVICE: FutureTenseContentServer:11.1.1.6.1 Transfer-Encoding: chunked Date: Wed, 10 Jul 2013 20:11:17 GMT Set-Cookie: JSESSIONID=vpMNRd1Fwb1NJyb5NH1pXx5dfmPhzzyJL2S3yYry3FwQqL8hFVJ6!1994306862; path=/; HttpOnly Content-Type: text/html; charset=UTF-8 X-Powered-By: Servlet/2.5 JSP/2.1 [2013-07-11 01:41:17.459][CS.INSTALL][ERROR] CSSetupEngine.doPing: Database Ping Failed. Make sure your application server and web server are running. Response received = HTTP/1.1 200 OK HOST_SERVICE: FutureTenseContentServer:11.1.1.6.1 Transfer-Encoding: chunked Date: Wed, 10 Jul 2013 20:11:17 GMT Set-Cookie: JSESSIONID=vpMNRd1Fwb1NJyb5NH1pXx5dfmPhzzyJL2S3yYry3FwQqL8hFVJ6!1994306862; path=/; HttpOnly Content-Type: text/html; charset=UTF-8 X-Powered-By: Servlet/2.5 JSP/2.1 [2013-07-11 01:41:17.460][CS.INSTALL][ERROR] CSSetupEngine.testConnectionAction: Database Ping was attempted with WCSDataSource as the DSN. The URL that was passed in = http://localhost:7001/cs/CatalogManager. Please Check your connection and property files settings. [2013-07-11 01:41:17.460][CS.INSTALL][ERROR] CSSetupEngine.testConnectionAction: Install was unable to ping the database. Installation has halted. [2013-07-11 01:41:17.461][CS.INSTALL][ERROR] Worker.run. Install failed. Please check log file. Click Yes to modify your install choices and re-try install. Click No to terminate application.
It looks like DB ping is getting failed.
But I am not sure how to resolve this error.
Please help. I am pasting the content of my bea_omii.ini file that I have used. (Please view as HTML, as formatting is getting lost on this page.)
Do let me know if any other information is required from my end.
bea_omii.ini:
#ContentServer install properties #Thu Apr 17 12:03:27 IST 2008 # Content Server Information # Specify the directory where you want to install Content Server i.e on windows C\:/csinstall on unix /opt/csinstall CSInstallDirectory=/home/oracle/WCS # Path to the Shared Directory i.e on windows C\:/csinstall/Shared on unix /opt/csinstall/Shared CSInstallSharedDirectory=/home/oracle/WCS/Shared # For delivery installation set Development to false Development=true # CSInstallType single/upgrade/cluster default is single only needed for upgrade or cluster #CSInstallType=single # This is to select APPSERVER Note: PORTALSERVER is not supported CSInstallPlatformType=APPSERVER # Set the application/portal server you want to install # Possible options are: wls92 for ( weblogic server), websphere60 (for webshpere), tomcat5 (for tomcat) CSInstallAppServerType=wls92 # Set the path to the server directory ex. For weblogic, on windows CSInstallAppServerPath=C\:\\bea\\wlserver_10.3 # on unix CSInstallAppServerPath=/u01/software/bea/wlserver_10.3 CSInstallAppServerPath=/home/oracle/Oracle/Middleware/wlserver_10.3 # [WEBLOGIC ONLY] Set the path to the weblogic domain i.e. on windows CSInstallWLDomainPath=C\:/bea/user_projects/domains/base_domain # on unix CSInstallWLDomainPath=/u01/software/bea/user_projects/domains/base_domain CSInstallWLDomainPath=/home/oracle/Oracle/Middleware/user_projects/domains/WCSDomain # [WEBLOGIC ONLY] Set the weblogic domain name i.e. base_domain name from path C\:/bea/user_projects/domains/base_domain CSInstallAdminDomainName=WCSDomain # Option for manual deployment (Should always be set to true) CSInstallbManual=true #Manual deployment needs to set the path where installer has to explode the war CSManualDeployPath=/home/oracle/WCS/deployment # Set the context path for your web application for example /cs/ sCgiPath=/cs/ # Set the database type Possible options #CSInstallDatabaseType= [SQL Server, DB2, Oracle10] CSInstallDatabaseType=Oracle10 # Set the data source name CSInstallDBDSN=WCSDataSource # By default it is installed as a primary cluster member. To install as cluster member make CSInstallType=cluster. CSInstallType=single #WEM installation IsWEMInstall=TRUE #hostname where cs is installed CASHostName=localhost # port number of cs installation CASPortNumber=7003 #Server HostName of internally accessible CAS CASHostNameLocal=localhost #Server PortNumber of internally accessible CAS CASPortNumberLocal=7003 #Server HostName where CAS is actually deployed CASHostNameActual=localhost # Select the default logger name (possible values com.fatwire.cs.core.logging.StandardLog, com.fatwire.cs.core.logging.TraditionalLog # com.fatwire.cs.core.logging.StandardTraditionalLog , org.apache.commons.logging.impl.Log4JLogger LoggerName=org.apache.commons.logging.impl.Log4JLogger # Set the host name where the application will be running CSInstallWebServerAddress=localhost # Set the port number where the application will be running CSInstallWebServerPort=7001 # Set this property to true if you are installing Spark CSInstallSpark=false # Sample Sites Information # Set this true if you want to install Avisports sample site. Avisports=true # CS-Direct and CS-Direct Advantage properties. Please don't touch them ContentCentre=true CatalogCentre=true # Set this true if you want to install CS Engage otherwise false MarketingStudio=true # Set this to true if you want to install Commerce Connectors CommerceConnector=true # Set this to true to install Structure and Navigation for FS2 this is only installed if this is development mode FSCore=true # Set this to true to install Engage Extensions for Structure and Navigation. This depends on Development and FSCore FSEngageCore=true # Set this to true to install Store Schema. This depends on Development and FSCore FSStoreSchema=true # Set this to true to install Engage Extensions for Store Schema. This depends on Development, CommereceConnector and FSEngageCore FSEngageStoreSchema=true # Set this to true to install Document Schema. This depends on Development and FSCore FSDocSchema=true # Set this to true to install Sample Visitors. This depends on Development and FSCore FSLocalUser=true # Set this to true to install Pretty URL Package. This depends on Development and FSCore FSPrettyURL=true # Set this to true to install Store Demo Data. This depends on Development and FSStoreSchema FSStoreDemoData=true # Set this to true to install Document Demo Data. This depends on Development and FSDocSchema FSDocDemoData=true # Set this to true to install Engage Store Data. This depends on Development,FSStoreDemoData,FSEngageStoreSchema and FSStoreSchema FSEngageStoreDemoData=true # If you want to install First Site II Site View set it true otherwise false. This depends on Development and FSStoreSchema FSSiteView=true # Set this to true to install Analytics. This depends on Development,FSCore,FSEngageCore,FSStoreSchema,CommerceConnector and CatalogCentre FSAnalytics=true # Set this to true to install Legacy (core) asset types (Article, Linkset). This depends on Development and ContentCentre CCSampleAssets=true # Set this to true to install Burlington Financial asset types. This depends on Development and ContentCentre CCSampleAssetsBF=true # Set this to true to install Engage and Analytics extensions for Burlington Financial. This depends on Development,MarketingStudio and ContentCentre MSSampleAssetsBF=true # Set this to true to install HelloAssetWorld asset types. This depends on Development and ContentCentre CCSampleAssetsHW=true # Set this to true to install GE Lighting asset types. This depends on Development and ContentCentre CatCSampleAssets=true # Set this to true to install Hello World sample site. This depends on Development and ContentCentre CCSampleSiteHW=true # Set this to true to install Burlington Financial sample site. This depends on CCSampleAssets and CCSampleAssetsBF CCSampleSiteBF=true # Set this to true to install Burlington Financial Extensions sample site. MSSampleSiteBF=true # Set this to true to install GE Lighting sample site. MSSampleSiteGE=true # Spark sample site components # Set this to true to install Document Management sample asset types DMSampleAssets=false # Set this to true to install Content Management sample asset types WCMSampleAssets=false # Set this to true to install Base Components SparkSampleSite=false # Set this to true to install Sample Data SparkSampleData=false # Set this to true to install Sample Portlets. Set this true if this is a portal server SparkSamplePortlets=false

Thanks for your reply Yct.
I got the ping issue resolved today, there was an issue in the data source. Finally I was able to complete the installation successfully.
But there is one more issue now. After completing the installation, I am trying to access the URL to get to the WCS login page, but with no success.
Below, I am mentioning few URLs that I tried, and the outcome:
http://localhost:7001/cs/HelloCS , This URL gives me a page with some static content messages like 'Welcome to Oracle WebCenter Sites 11gR1'. Then there are some text lines in blue color. I think this page is working as expected.
http://localhost:7001/cs/login , this URL automatically gets redirected to the URL 'http://localhost:7003/cas/login?service=http%3A%2F%2Flocalhost%3A7001%2Fcs%2Fwem%2Ffatwire%2Fwem%2FWelcome' and I get an error message 'Firefox can't establish a connection to the server at localhost:7003.'
http://localhost:7001/cas/login, this takes me to login page, where when I enter fwadmin@xceladmin credentials, I am taken to JASIG Central Authentication Service page, which is again static, and I can't do anything on this page
http://localhost:7001/cs/Satellite?c=Page&cid=1327351719456&pagename=avisports%2FPage%2FHomeLayout1 , this takes me to the Avisports site, which is functional
http://localhost:7001/cs/Satellite?c=Page&childpagename=FirstSiteII%2FFSIILayout&cid=1124747609916&pagename=FSIIWrapper, this takes me to he FirstSit page, which is again functional
Issue: I am not getting the main login page, where I would get 3 sites(Avisports/FirstsiteII) in the dropdown.
Looks like there is something wrong going on.
Following I am pasting my omii.ini file, if it helps:
#ContentServer install properties
#Thu Apr 17 12:03:27 IST 2008
# Content Server Information
# Specify the directory where you want to install Content Server i.e on windows C\:/csinstall on unix /opt/csinstall
CSInstallDirectory=/home/oracle/WCS
# Path to the Shared Directory i.e on windows C\:/csinstall/Shared on unix /opt/csinstall/Shared
CSInstallSharedDirectory=/home/oracle/WCS/Shared
# For delivery installation set Development to false
Development=true
# CSInstallType single/upgrade/cluster default is single only needed for upgrade or cluster
#CSInstallType=single
# This is to select APPSERVER Note: PORTALSERVER is not supported
CSInstallPlatformType=APPSERVER
# Set the application/portal server you want to install
# Possible options are: wls92 for ( weblogic server), websphere60 (for webshpere), tomcat5 (for tomcat)
CSInstallAppServerType=wls92
# Set the path to the server directory ex. For weblogic, on windows CSInstallAppServerPath=C\:\\bea\\wlserver_10.3
# on unix CSInstallAppServerPath=/u01/software/bea/wlserver_10.3
CSInstallAppServerPath=/home/oracle/Oracle/Middleware/wlserver_10.3
# [WEBLOGIC ONLY] Set the path to the weblogic domain i.e. on windows CSInstallWLDomainPath=C\:/bea/user_projects/domains/base_domain
# on unix CSInstallWLDomainPath=/u01/software/bea/user_projects/domains/base_domain
CSInstallWLDomainPath=/home/oracle/Oracle/Middleware/user_projects/domains/WCSDomain
# [WEBLOGIC ONLY] Set the weblogic domain name i.e. base_domain name from path C\:/bea/user_projects/domains/base_domain
CSInstallAdminDomainName=WCSDomain
# Option for manual deployment (Should always be set to true)
CSInstallbManual=true
#Manual deployment needs to set the path where installer has to explode the war
CSManualDeployPath=/home/oracle/WCS/deployment
# Set the context path for your web application for example /cs/
sCgiPath=/cs/
# Set the database type Possible options
#CSInstallDatabaseType= [SQL Server, DB2, Oracle10]
CSInstallDatabaseType=Oracle10
# Set the data source name
CSInstallDBDSN=WCSDataSource
# By default it is installed as a primary cluster member. To install as cluster member make CSInstallType=cluster.
CSInstallType=single
#WEM installation
IsWEMInstall=TRUE
#hostname where cs is installed
CASHostName=localhost
# port number of cs installation
CASPortNumber=7003
#Server HostName of internally accessible CAS
CASHostNameLocal=localhost
#Server PortNumber of internally accessible CAS
CASPortNumberLocal=7003
#Server HostName where CAS is actually deployed
CASHostNameActual=localhost
# Select the default logger name (possible values com.fatwire.cs.core.logging.StandardLog, com.fatwire.cs.core.logging.TraditionalLog
# com.fatwire.cs.core.logging.StandardTraditionalLog , org.apache.commons.logging.impl.Log4JLogger
LoggerName=org.apache.commons.logging.impl.Log4JLogger
# Set the host name where the application will be running
CSInstallWebServerAddress=localhost
# Set the port number where the application will be running
CSInstallWebServerPort=7001
# Set this property to true if you are installing Spark
CSInstallSpark=false
# Sample Sites Information
# Set this true if you want to install Avisports sample site.
Avisports=true
# CS-Direct and CS-Direct Advantage properties. Please don't touch them
ContentCentre=true
CatalogCentre=true
# Set this true if you want to install CS Engage otherwise false
MarketingStudio=true
# Set this to true if you want to install Commerce Connectors
CommerceConnector=true
# Set this to true to install Structure and Navigation for FS2 this is only installed if this is development mode
FSCore=true
# Set this to true to install Engage Extensions for Structure and Navigation. This depends on Development and FSCore
FSEngageCore=true
# Set this to true to install Store Schema. This depends on Development and FSCore
FSStoreSchema=true
# Set this to true to install Engage Extensions for Store Schema. This depends on Development, CommereceConnector and FSEngageCore
FSEngageStoreSchema=true
# Set this to true to install Document Schema. This depends on Development and FSCore
FSDocSchema=true
# Set this to true to install Sample Visitors. This depends on Development and FSCore
FSLocalUser=true
# Set this to true to install Pretty URL Package. This depends on Development and FSCore
FSPrettyURL=true
# Set this to true to install Store Demo Data. This depends on Development and FSStoreSchema
FSStoreDemoData=true
# Set this to true to install Document Demo Data. This depends on Development and FSDocSchema
FSDocDemoData=true
# Set this to true to install Engage Store Data. This depends on Development,FSStoreDemoData,FSEngageStoreSchema and FSStoreSchema
FSEngageStoreDemoData=true
# If you want to install First Site II Site View set it true otherwise false. This depends on Development and FSStoreSchema
FSSiteView=true
# Set this to true to install Analytics. This depends on Development,FSCore,FSEngageCore,FSStoreSchema,CommerceConnector and CatalogCentre
FSAnalytics=true
# Set this to true to install Legacy (core) asset types (Article, Linkset). This depends on Development and ContentCentre
CCSampleAssets=true
# Set this to true to install Burlington Financial asset types. This depends on Development and ContentCentre
CCSampleAssetsBF=true
# Set this to true to install Engage and Analytics extensions for Burlington Financial. This depends on Development,MarketingStudio and ContentCentre
MSSampleAssetsBF=true
# Set this to true to install HelloAssetWorld asset types. This depends on Development and ContentCentre
CCSampleAssetsHW=true
# Set this to true to install GE Lighting asset types. This depends on Development and ContentCentre
CatCSampleAssets=true
# Set this to true to install Hello World sample site. This depends on Development and ContentCentre
CCSampleSiteHW=true
# Set this to true to install Burlington Financial sample site. This depends on CCSampleAssets and CCSampleAssetsBF
CCSampleSiteBF=true
# Set this to true to install Burlington Financial Extensions sample site.
MSSampleSiteBF=true
# Set this to true to install GE Lighting sample site.
MSSampleSiteGE=true
# Spark sample site components
# Set this to true to install Document Management sample asset types
DMSampleAssets=false
# Set this to true to install Content Management sample asset types
WCMSampleAssets=false
# Set this to true to install Base Components
SparkSampleSite=false
# Set this to true to install Sample Data
SparkSampleData=false
# Set this to true to install Sample Portlets. Set this true if this is a portal server
SparkSamplePortlets=false

Database Logon Failed which created by Crystal Report 2008

this time i meet the famous error again which is database logon failed.
i created a crystal report 2008 starting from blank report, then connect with odbc
i use 2008 method
objRpt.SetDatabaseLogon(db_username, db_password, odbc_name, database_name);
2008 method will get database logon failed even set database location and verify database again
then i use 8.5 method and try again for 2008 report. it said field name is unknown for one of formula
then i drag field again for formula and set database location and verify database again
it said the same error.
then i uninstall 8.5 crytal report software in window 7 deployment machine, and do above again, it said the same error
//'Create a new Stored Procedure Table to replace the reports current table.
        CrystalDecisions.ReportAppServer.DataDefModel.Procedure boTable = new CrystalDecisions.ReportAppServer.DataDefModel.Procedure();
        //'boMainPropertyBag: These hold the attributes of the tables ConnectionInfo object
        PropertyBag boMainPropertyBag = new PropertyBag();
        //'boInnerPropertyBag: These hold the attributes for the QE_LogonProperties
        //'In the main property bag (boMainPropertyBag)
        PropertyBag boInnerPropertyBag = new PropertyBag();
        //'Set the attributes for the boInnerPropertyBag
        boInnerPropertyBag.Add("Connect Timeout", "15");
        //boInnerPropertyBag.Add("Data Source", "MyDataSource");
        boInnerPropertyBag.Add("Data Source", "10.1.1.191");
        boInnerPropertyBag.Add("DataTypeCompatibility", "0");
        boInnerPropertyBag.Add("General Timeout", "0");
        //boInnerPropertyBag.Add("Initial Catalog", "MyCatalog");
        boInnerPropertyBag.Add("Initial Catalog", database_name);
        boInnerPropertyBag.Add("Integrated Security", "False");
        boInnerPropertyBag.Add("Locale Identifier", "1033");
        boInnerPropertyBag.Add("MARS Connection", "0");
        //boInnerPropertyBag.Add("OLE DB Services", "-5");
        //boInnerPropertyBag.Add("ODBC", "-5");
        boInnerPropertyBag.Add("ODBC", "Cheque");
        boInnerPropertyBag.Add("Provider", "SQLNCLI");
        boInnerPropertyBag.Add("Tag with column collation when possible", "0");
        boInnerPropertyBag.Add("Trust Server Certificate", "0");
        boInnerPropertyBag.Add("Use Encryption for Data", "0");
        //'Set the attributes for the boMainPropertyBag
        boMainPropertyBag.Add("Database DLL", "crdb_ado.dll");
        //boMainPropertyBag.Add("Database DLL", "p2sodbc.dll");
        //boMainPropertyBag.Add("QE_DatabaseName", "VEPILOT");
        boMainPropertyBag.Add("QE_DatabaseName", database_name);
        //boMainPropertyBag.Add("QE_DatabaseType", "OLE DB (ADO)");
        boMainPropertyBag.Add("QE_DatabaseType", "ODBC");
        //'Add the QE_LogonProperties we set in the boInnerPropertyBag Object
        boMainPropertyBag.Add("QE_LogonProperties", boInnerPropertyBag);
        boMainPropertyBag.Add("QE_ServerDescription", "MyServer");
        boMainPropertyBag.Add("QE_SQLDB", "True");
        boMainPropertyBag.Add("SSO Enabled", "False");
        //'Create a new ConnectionInfo object
        CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo boConnectionInfo = new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo();
        //'Pass the database properties to a connection info object
        boConnectionInfo.Attributes = boMainPropertyBag;
        //'Set the connection kind
        boConnectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;
        //'*EDIT* Set the User Name and Password if required.
        boConnectionInfo.UserName = db_username;
        boConnectionInfo.Password = db_password;
        //'Pass the connection information to the table
        boTable.ConnectionInfo = boConnectionInfo;
CrystalDecisions.ReportAppServer.DataDefModel.Tables boTables = objRpt.ReportClientDocument.DatabaseController.Database.Tables;
            CrystalDecisions.CrystalReports.Engine.Tables tables = objRpt.Database.Tables;
            foreach (CrystalDecisions.CrystalReports.Engine.Table table in tables)
                if (!string.IsNullOrEmpty(table.Name))
                    //boTable.Name = table.Name;
                    //boTable.QualifiedName = database_name + ".dbo." + table.Name;
                    //boTable.Alias = table.Name;
                    boTable.Name = "sp_ChequeIssueDetRpt";
                    boTable.QualifiedName = database_name + ".dbo.sp_ChequeIssueDetRpt";
                    boTable.Alias = "sp_ChequeIssueDetRpt";
                    objRpt.ReportClientDocument.DatabaseController.SetTableLocation(boTables[0], boTable);
            objRpt.VerifyDatabase();
http://sourceforge.net/projects/aspchequesprint/files/ChequeIssueDet.rpt/download

No subreport, only a stored procedure with final two lines are
print @m_sql
exec (@m_sql)
After use generated code in the link above
Error at boReportDocument.VerifyDatabase();
Inner Exception : no error
Message "Logon failed"
ErrorID : CrystalDecisions.CrystalReports.Engine.EngineExceptionErrorID.LogOnFailed
HelpLink : null
stacktrace : CrystalDecisions.CrystalReports.Engine.ReportDocument.VerifyDatabase()\r\n   at viewReport.Page_Load(Object sender, EventArgs e) 於 d:
Data
My Documents
Visual Studio 2008
WebSites
Cheques
viewReport.aspx.cs: row 1302\r\n   at System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e)\r\n   at System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e)\r\n   at System.Web.UI.Control.OnLoad(EventArgs e)\r\n   at System.Web.UI.Control.LoadRecursive()\r\n   於 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
TargetSite : {Void VerifyDatabase()}
string reportPath = report_path + "ChequeIssueDet.rpt";
            boReportDocument = new ReportDocument();
            //**EDIT** Change the path and report name to the report you want to change.
            boReportDocument.Load(reportPath, OpenReportMethod.OpenReportByTempCopy);
            //Create a new Stored Procedure Table to replace the reports current table.
            CrystalDecisions.ReportAppServer.DataDefModel.Procedure boTable =
            new CrystalDecisions.ReportAppServer.DataDefModel.Procedure();
            //boMainPropertyBag: These hold the attributes of the tables ConnectionInfo object
            PropertyBag boMainPropertyBag = new PropertyBag();
            //boInnerPropertyBag: These hold the attributes for the QE_LogonProperties
            //In the main property bag (boMainPropertyBag)
            PropertyBag boInnerPropertyBag = new PropertyBag();
            //Set the attributes for the boInnerPropertyBag
            boInnerPropertyBag.Add("Database", database_name);
            boInnerPropertyBag.Add("DSN", "Cheque");
            boInnerPropertyBag.Add("UseDSNProperties", "False");
            //Set the attributes for the boMainPropertyBag
            boMainPropertyBag.Add("Database DLL", "crdb_odbc.dll");
            boMainPropertyBag.Add("QE_DatabaseName", database_name);
            boMainPropertyBag.Add("QE_DatabaseType", "ODBC (RDO)");
            //Add the QE_LogonProperties we set in the boInnerPropertyBag Object
            boMainPropertyBag.Add("QE_LogonProperties", boInnerPropertyBag);
            boMainPropertyBag.Add("QE_ServerDescription", "Cheque");
            boMainPropertyBag.Add("QE_SQLDB", "True");
            boMainPropertyBag.Add("SSO Enabled", "False");
            //Create a new ConnectionInfo object
            CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo boConnectionInfo =
            new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo();
            //Pass the database properties to a connection info object
            boConnectionInfo.Attributes = boMainPropertyBag;
            //Set the connection kind
            boConnectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;
            //**EDIT** Set the User Name and Password if required.
            boConnectionInfo.UserName = db_username;
            boConnectionInfo.Password = db_password;
            //Pass the connection information to the table
            boTable.ConnectionInfo = boConnectionInfo;
            //Get the Database Tables Collection for your report
            CrystalDecisions.ReportAppServer.DataDefModel.Tables boTables;
            boTables = boReportDocument.ReportClientDocument.DatabaseController.Database.Tables;
            //For each table in the report:
            // - Set the Table Name properties.
            // - Set the table location in the report to use the new modified table
            boTable.Name = "sp_ChequeIssueDetRpt;1";
            boTable.QualifiedName = database_name+".dbo.sp_ChequeIssueDetRpt;1";
            boTable.Alias = "sp_ChequeIssueDetRpt;1";
            boReportDocument.ReportClientDocument.DatabaseController.SetTableLocation(boTables[0], boTable);
            //Verify the database after adding substituting the new table.
            //To ensure that the table updates properly when adding Command tables or Stored Procedures.
            boReportDocument.VerifyDatabase();
            //**EDIT** Set the value for the Stored Procedure parameters.
            string m_curUser = "";
            int spid = Convert.ToInt32(Request.Cookies["login_cookie"]["spid"]);
            queryString = "select * from v_All_Session where SPID=" + spid.ToString();
            //string _connectionString = ConfigurationManager.ConnectionStrings["ChequeConnectionString"].ConnectionString;
            using (SqlConnection connection = new SqlConnection(_connectionString))
                SqlCommand command = connection.CreateCommand();
                command.CommandText = queryString;
                connection.Open();
                using (SqlDataReader datareader = command.ExecuteReader())
                    if (datareader.HasRows == true)
                        while (datareader.Read())
                            if (datareader["UserID"] != System.DBNull.Value)
                                m_curUser = datareader["UserID"].ToString();
                    datareader.Close();
                connection.Close();
            boReportDocument.SetParameterValue("@UserID", m_curUser);
            if (string.IsNullOrEmpty(Session["fm_CoCode"].ToString()))
                boReportDocument.SetParameterValue("@fm_CoCode", Session["fm_CoCode"].ToString());
            if (string.IsNullOrEmpty(Session["to_CoCode"].ToString()))
                boReportDocument.SetParameterValue("@to_CoCode", Session["to_CoCode"].ToString());
            if (string.IsNullOrEmpty(Session["fm_BankACNo"].ToString()))
                boReportDocument.SetParameterValue("@fm_BankACNo", Session["fm_BankACNo"].ToString());
            if (string.IsNullOrEmpty(Session["to_BankACNo"].ToString()))
                boReportDocument.SetParameterValue("@to_BankACNo", Session["to_BankACNo"].ToString());
            if (string.IsNullOrEmpty(Session["fm_BatchNo"].ToString()))
                boReportDocument.SetParameterValue("@fm_BatchNo", Session["fm_BatchNo"].ToString());
            if (string.IsNullOrEmpty(Session["to_BatchNo"].ToString()))
                boReportDocument.SetParameterValue("@to_BatchNo", Session["to_BatchNo"].ToString());
Edited by: Mathew_666 on Jul 19, 2011 4:27 AM
Edited by: Mathew_666 on Jul 19, 2011 4:28 AM

Creation of uninitialized database 87684942 failed

Hello,
we get this "Error Creation of uninitialized database 87684942 failed" if we try to make a Setup-Package under MI 7.0 SP 15 with MaxDB for Client persistance.
Our System is WebAS is NW 7.0 SP15 with usage type MI and AS ABAP and AS Java. MI is 7.0 SP 15. All on Win 2003 32-Bit with Oracle DB.
The MaxDB is 7.6 the newest Version. The Generation-Process function well till it tries to create the DB. We've changed a lot of things in Visual Admin for MaxDB without any better result.
Any suggestions?
Thanks in advance.

Hi Oliver,
thank you.
Maybe i have another Documentation, but this is written in the Docu:
Installing SAP MI on the Mobile Device
-Mobile Device Installation using Setup Packages
--Installing MaxDB for Setup Package Creation
---Installing MaxDB on a system where a different version is installed
---Installing MaxDB on a system with no MaxDB installation
I spend times on Installation and Setup that MI, cause the Help, Guides and Notes are so dramatically inconsistent. We can't download the DB2e from SAP nor either from IBM. Every Link is broken. If you be able to send me the DB2e we are very happy.
For a little explanation: This is my first time i use SAP MI. All work is for my diploma. So that is too much time consuming.
Thank you.
Regards

Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 537, state 3, severity 16

Hello,
I've encountered issue during installation of SP1 to SQL Server 2012. After upgrade I'm getting this error in Event Log:
Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 537, state 3, severity 16. This is a serious error condition which might interfere with regular operation and the database will be taken offline.
If the error happened during upgrade of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective actions and re-start the database so that the script
upgrade steps run to completion.
Can someone point me direction how I can fix it? This is a production server and currently only way to make it working is to use T902 flag in SQL Server startup params. I've found some suggestions to check Data path if it exists but it does so this is not
the issue here. Any ideas?
I've found also here
http://www.sqlservercentral.com/Forums/Topic1377073-1550-1.aspx#bm1378279
suggestions for similar issue with SQL Server 2008 which that I should do:
Via ssms:
From msdb:
Delete:
dc_admin role
Dc_operator role
Dc_proxy role
UlitityCMRReader role
UtilityIMRReader role
UtilityIMRWriter role
but for not I didn't tried it yet. This is standalone SQL Server instance.
Any help really appreciated.
Regards

Script returns the same error.
System databases:
1   1   760   -1   10   1048578   0   1   master       C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\master.mdf
2   0   12768   -1   10   1048642   0   1   mastlog       C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
1   1   1024   -1   10   1048578   0   2   tempdev       C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\tempdb.mdf
2   0   64   -1   10   1048642   0   2   templog       C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\templog.ldf
1   1   288   -1   128   2   0   3   modeldev   C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\model.mdf
2   0   4464   -1   10   1048642   0   3   modellog   C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\modellog.ldf
1   1   28936   -1   10   1048578   0   4   MSDBData   C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBData.mdf
2   0   3352   268435456   10   1048642   0   4   MSDBLog   C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBLog.ldf
are all in place where path shows.
Before sending my message I've searched update script for "FROM master.sys.master_files" and I found script which you are showing me. I've made some digging and when I runned:
       SELECT physical_name
       FROM master.sys.master_files
       WHERE (name = N'master')
it returned also path to one my customers database name which has filename set correctly but it's Logical DB name is master and mastlog. I'm running shared hosting company and I allow my customers to restore their DBs from .bak files but I have no idea why
this customers logical name is set to master and mastlog. Probably when I change this names update script will work as it should. On the other hand in my opinion there should be some kind of fail safe mechanism for situations like this one.
EDIT: After changing logical name for DB and log for mentioned DB your script runned fine so probably now when I remove T902 flag and restart my SQL Server update will run correctly. Big thanks for resolving this issue.

How to "roll back" the model if a database update fails

I'd like to know if there's a way to "roll back" the model (the values in the managed beans) if a service call to a database fails during the Invoke Application phase. My understanding of the JSF lifecycle is that the values in the model are updated before a service call to a database would happen. If the database update operation fails, it seems to me that the data in the model and the database would be inconsistent.
For example, say I have a ridiculously simple application that updates a names database. The fields are id, last name, first name. The application has a simple view that allows the user to update a name in the database. The user updates the last name field for a particular record from "Doe" to "Smith" and clicks "submit". The request goes through the lifecycle, the model values are updated from the web form during the Update Model Values phase, then the call to update the database fails during the Invoke Applications phase (the database connection failed). When the Render Response phase completes, the UI would display an error message where I put <h:messages> but the last name value in the UI would show "Smith" instead of "Doe". Is there something I can do to roll the model value back to "Doe" if the database call fails?
I know that I could redirect to a technical error page, but I'd like to avoid it unless it is the best thing to do.
I'd appreciate any advice you can offer.
Thanks.
- Luke

I'd like to know if there's a way to "roll back" the model (the values in the managed beans) if a service call to a database fails during the Invoke Application phase. My understanding of the JSF lifecycle is that the values in the model are updated before a service call to a database would happen. If the database update operation fails, it seems to me that the data in the model and the database would be inconsistent.
For example, say I have a ridiculously simple application that updates a names database. The fields are id, last name, first name. The application has a simple view that allows the user to update a name in the database. The user updates the last name field for a particular record from "Doe" to "Smith" and clicks "submit". The request goes through the lifecycle, the model values are updated from the web form during the Update Model Values phase, then the call to update the database fails during the Invoke Applications phase (the database connection failed). When the Render Response phase completes, the UI would display an error message where I put <h:messages> but the last name value in the UI would show "Smith" instead of "Doe". Is there something I can do to roll the model value back to "Doe" if the database call fails?
I know that I could redirect to a technical error page, but I'd like to avoid it unless it is the best thing to do.
I'd appreciate any advice you can offer.
Thanks.
- Luke

Database recover fail

Similar Messages

Maybe you are looking for