Database shutdown taking more time, is listener process a problem??
Dear all,
though its a general process to stop the listener before shutting down the database for cold backup. but is it so that if you don't stop the listener before giving shutdown immediate command, the shutdown process takes long time than normal expected time?
because as per my understanding, the listener process is used just for the connection and when we give shutdown command the database automatically rejects any new connections. your valuable comments are required.
No version, as usual, and the answer is version specific.
Why is it so difficult to include those 4 digits?
Dear all,
though its a general process to stop the listener
before shutting down the database for cold backup.
but is it so that if you don't stop the listener
before giving shutdown immediate command, the
shutdown process takes long time than normal expected
time? No. Must be a fairy tale without proof.
You might need set job_queue_processes to 0 and aq_tm_processes to 0, but that has nothing to do with the listener.
>
because as per my understanding, the listener process
is used just for the connection and when we give
shutdown command the database automatically rejects
any new connections. your valuable comments are
required.--
Sybrand Bakker
Senior Oracle DBA
Similar Messages
-
Recover Database is taking more time for first archived redo log file
Hai,
Environment Used :
Hardware : IBM p570 machine with P6 processor Lpar of .5 CPU and 2.5 GB Ram
OS : AIX 5.3 ML 07
Cluster: HACMP 5.4.1.2
Oracle Version: 9.2.0.4 RAC
SAN : DS8100 from IBM
I have used flash copy option to copy the database from production to test machine. Then tried to recover the database to an consistent state using the command "recover automatic database until cancel". System is taking long time and after viewing the alert log it was found that, for the first time, if it is reading all the datafiles and it is taking 3 seconds for each datafile. Since i have more than 500 datafiles, it is nearly taking 25 mins for applying the first archived redo log file. All other log files are applied immeidately without any delay. Any suggession to improve the speed will be highly appreciated.
Regards
SridharAfter chaning the LPAR settings with 2 CPU and 5GB RAM, the problem solved.
-
One database user taking more time to connect
Hi All,
I have a question,
I have a database say 500GB and I have around 50 schemas in this database.But there is one User that takes more than normal time to connect to the database.
What can be the reason for this and what should be my apprach to look for the problem where it could possibly be.
Regards,
Sphinxyes, check for online trigger if none there put your own on logon trigger on a normal user and your issue user. do a 10046, examine the trace files, everything the user is doing will be in it.
CREATE OR REPLACE TRIGGER SYS.set_trace
AFTER LOGON ON DATABASE
WHEN (USER in 'GOODUSER','BADUSER')
DECLARE
lcommand varchar(200);
BEGIN
EXECUTE IMMEDIATE 'alter session set statistics_level=ALL';
EXECUTE IMMEDIATE 'alter session set max_dump_file_size=UNLIMITED';
EXECUTE IMMEDIATE 'alter session set events ''10046 trace name context forever, level 12''';
END set_trace;
/tkprof the trace files, whats the difference between good and bad.
moneys on a trigger though. -
Sub VI to enter database data taking more time when calling from main VI
Hi All,
I created a sub vi to enter data to a new database, after reading from another database. when i executed that sub vi alone, it took only 2 minutes to enter 20000 records. But when i called that sub VI from my main VI, its taking 35 minutes to enter 20000 records.
my maiin vi has another while loop running parallelly which will perform some other operations. How to handle memory in this case? i mean when i call my sub vi from main vi, i need to give complete processor memory for that sub vi. is it possible?
please help. thanks in advance.
SoorajHi Oliver,
in your example the numeric data is passed from sub-vi to main only when sub-vi terminates, this is what it's supposed to be when you fetch the data from the connector output of a sub-vi.
You can use queues function to exchange data between sub-vi and main.vi; take a look at the example Message Logging with Named Queue.vi.
An alternative method is passing to sub-vi a reference of an indicator (or control) and update its value on the fly.
See example.
Alberto
Attachments:
passing_data_from_sub-vi.llb 35 KB -
Query in timesten taking more time than query in oracle database
Hi,
Can anyone please explain me why query in timesten taking more time
than query in oracle database.
I am mentioning in detail what are my settings and what have I done
step by step.........
1.This is the table I created in Oracle datababase
(Oracle Database 10g Enterprise Edition Release 10.2.0.1.0)...
CREATE TABLE student (
id NUMBER(9) primary keY ,
first_name VARCHAR2(10),
last_name VARCHAR2(10)
2.THIS IS THE ANONYMOUS BLOCK I USE TO
POPULATE THE STUDENT TABLE(TOTAL 2599999 ROWS)...
declare
firstname varchar2(12);
lastname varchar2(12);
catt number(9);
begin
for cntr in 1..2599999 loop
firstname:=(cntr+8)||'f';
lastname:=(cntr+2)||'l';
if cntr like '%9999' then
dbms_output.put_line(cntr);
end if;
insert into student values(cntr,firstname, lastname);
end loop;
end;
3. MY DSN IS SET THE FOLLWING WAY..
DATA STORE PATH- G:\dipesh3repo\db
LOG DIRECTORY- G:\dipesh3repo\log
PERM DATA SIZE-1000
TEMP DATA SIZE-1000
MY TIMESTEN VERSION-
C:\Documents and Settings\dipesh>ttversion
TimesTen Release 7.0.3.0.0 (32 bit NT) (tt70_32:17000) 2007-09-19T16:04:16Z
Instance admin: dipesh
Instance home directory: G:\TimestTen\TT70_32
Daemon home directory: G:\TimestTen\TT70_32\srv\info
THEN I CONNECT TO THE TIMESTEN DATABASE
C:\Documents and Settings\dipesh> ttisql
command>connect "dsn=dipesh3;oraclepwd=tiger";
4. THEN I START THE AGENT
call ttCacheUidPwdSet('SCOTT','TIGER');
Command> CALL ttCacheStart();
5.THEN I CREATE THE READ ONLY CACHE GROUP AND LOAD IT
create readonly cache group rc_student autorefresh
interval 5 seconds from student
(id int not null primary key, first_name varchar2(10), last_name varchar2(10));
load cache group rc_student commit every 100 rows;
6.NOW I CAN ACCESS THE TABLES FROM TIMESTEN AND PERFORM THE QUERY
I SET THE TIMING..
command>TIMING 1;
consider this query now..
Command> select * from student where first_name='2155666f';
< 2155658, 2155666f, 2155660l >
1 row found.
Execution time (SQLExecute + Fetch Loop) = 0.668822 seconds.
another query-
Command> SELECT * FROM STUDENTS WHERE FIRST_NAME='2340009f';
2206: Table SCOTT.STUDENTS not found
Execution time (SQLPrepare) = 0.074964 seconds.
The command failed.
Command> SELECT * FROM STUDENT where first_name='2093434f';
< 2093426, 2093434f, 2093428l >
1 row found.
Execution time (SQLExecute + Fetch Loop) = 0.585897 seconds.
Command>
7.NOW I PERFORM THE SIMILAR QUERIES FROM SQLPLUS...
SQL> SELECT * FROM STUDENT WHERE FIRST_NAME='1498671f';
ID FIRST_NAME LAST_NAME
1498663 1498671f 1498665l
Elapsed: 00:00:00.15
Can anyone please explain me why query in timesten taking more time
that query in oracle database.
Message was edited by: Dipesh Majumdar
user542575
Message was edited by:
user542575TimesTen
Hardware: Windows Server 2003 R2 Enterprise x64; 8 x Dual-core AMD 8216 2.41GHz processors; 32 GB RAM
Version: 7.0.4.0.0 64 bit
Schema:
create usermanaged cache group factCache from
MV_US_DATAMART
ORDER_DATE DATE,
IF_SYSTEM VARCHAR2(32) NOT NULL,
GROUPING_ID TT_BIGINT,
TIME_DIM_ID TT_INTEGER NOT NULL,
BUSINESS_DIM_ID TT_INTEGER NOT NULL,
ACCOUNT_DIM_ID TT_INTEGER NOT NULL,
ORDERTYPE_DIM_ID TT_INTEGER NOT NULL,
INSTR_DIM_ID TT_INTEGER NOT NULL,
EXECUTION_DIM_ID TT_INTEGER NOT NULL,
EXEC_EXCHANGE_DIM_ID TT_INTEGER NOT NULL,
NO_ORDERS TT_BIGINT,
FILLED_QUANTITY TT_BIGINT,
CNT_FILLED_QUANTITY TT_BIGINT,
QUANTITY TT_BIGINT,
CNT_QUANTITY TT_BIGINT,
COMMISSION BINARY_FLOAT,
CNT_COMMISSION TT_BIGINT,
FILLS_NUMBER TT_BIGINT,
CNT_FILLS_NUMBER TT_BIGINT,
AGGRESSIVE_FILLS TT_BIGINT,
CNT_AGGRESSIVE_FILLS TT_BIGINT,
NOTIONAL BINARY_FLOAT,
CNT_NOTIONAL TT_BIGINT,
TOTAL_PRICE BINARY_FLOAT,
CNT_TOTAL_PRICE TT_BIGINT,
CANCELLED_ORDERS_COUNT TT_BIGINT,
CNT_CANCELLED_ORDERS_COUNT TT_BIGINT,
ROUTED_ORDERS_NO TT_BIGINT,
CNT_ROUTED_ORDERS_NO TT_BIGINT,
ROUTED_LIQUIDITY_QTY TT_BIGINT,
CNT_ROUTED_LIQUIDITY_QTY TT_BIGINT,
REMOVED_LIQUIDITY_QTY TT_BIGINT,
CNT_REMOVED_LIQUIDITY_QTY TT_BIGINT,
ADDED_LIQUIDITY_QTY TT_BIGINT,
CNT_ADDED_LIQUIDITY_QTY TT_BIGINT,
AGENT_CHARGES BINARY_FLOAT,
CNT_AGENT_CHARGES TT_BIGINT,
CLEARING_CHARGES BINARY_FLOAT,
CNT_CLEARING_CHARGES TT_BIGINT,
EXECUTION_CHARGES BINARY_FLOAT,
CNT_EXECUTION_CHARGES TT_BIGINT,
TRANSACTION_CHARGES BINARY_FLOAT,
CNT_TRANSACTION_CHARGES TT_BIGINT,
ORDER_MANAGEMENT BINARY_FLOAT,
CNT_ORDER_MANAGEMENT TT_BIGINT,
SETTLEMENT_CHARGES BINARY_FLOAT,
CNT_SETTLEMENT_CHARGES TT_BIGINT,
RECOVERED_AGENT BINARY_FLOAT,
CNT_RECOVERED_AGENT TT_BIGINT,
RECOVERED_CLEARING BINARY_FLOAT,
CNT_RECOVERED_CLEARING TT_BIGINT,
RECOVERED_EXECUTION BINARY_FLOAT,
CNT_RECOVERED_EXECUTION TT_BIGINT,
RECOVERED_TRANSACTION BINARY_FLOAT,
CNT_RECOVERED_TRANSACTION TT_BIGINT,
RECOVERED_ORD_MGT BINARY_FLOAT,
CNT_RECOVERED_ORD_MGT TT_BIGINT,
RECOVERED_SETTLEMENT BINARY_FLOAT,
CNT_RECOVERED_SETTLEMENT TT_BIGINT,
CLIENT_AGENT BINARY_FLOAT,
CNT_CLIENT_AGENT TT_BIGINT,
CLIENT_ORDER_MGT BINARY_FLOAT,
CNT_CLIENT_ORDER_MGT TT_BIGINT,
CLIENT_EXEC BINARY_FLOAT,
CNT_CLIENT_EXEC TT_BIGINT,
CLIENT_TRANS BINARY_FLOAT,
CNT_CLIENT_TRANS TT_BIGINT,
CLIENT_CLEARING BINARY_FLOAT,
CNT_CLIENT_CLEARING TT_BIGINT,
CLIENT_SETTLE BINARY_FLOAT,
CNT_CLIENT_SETTLE TT_BIGINT,
CHARGEABLE_TAXES BINARY_FLOAT,
CNT_CHARGEABLE_TAXES TT_BIGINT,
VENDOR_CHARGE BINARY_FLOAT,
CNT_VENDOR_CHARGE TT_BIGINT,
ROUTING_CHARGES BINARY_FLOAT,
CNT_ROUTING_CHARGES TT_BIGINT,
RECOVERED_ROUTING BINARY_FLOAT,
CNT_RECOVERED_ROUTING TT_BIGINT,
CLIENT_ROUTING BINARY_FLOAT,
CNT_CLIENT_ROUTING TT_BIGINT,
TICKET_CHARGES BINARY_FLOAT,
CNT_TICKET_CHARGES TT_BIGINT,
RECOVERED_TICKET_CHARGES BINARY_FLOAT,
CNT_RECOVERED_TICKET_CHARGES TT_BIGINT,
PRIMARY KEY(ORDER_DATE, TIME_DIM_ID, BUSINESS_DIM_ID, ACCOUNT_DIM_ID, ORDERTYPE_DIM_ID, INSTR_DIM_ID, EXECUTION_DIM_ID,EXEC_EXCHANGE_DIM_ID),
READONLY);
No of rows: 2228558
Config:
< CkptFrequency, 600 >
< CkptLogVolume, 0 >
< CkptRate, 0 >
< ConnectionCharacterSet, US7ASCII >
< ConnectionName, tt_us_dma >
< Connections, 64 >
< DataBaseCharacterSet, AL32UTF8 >
< DataStore, e:\andrew\datacache\usDMA >
< DurableCommits, 0 >
< GroupRestrict, <NULL> >
< LockLevel, 0 >
< LockWait, 10 >
< LogBuffSize, 65536 >
< LogDir, e:\andrew\datacache\ >
< LogFileSize, 64 >
< LogFlushMethod, 1 >
< LogPurge, 0 >
< Logging, 1 >
< MemoryLock, 0 >
< NLS_LENGTH_SEMANTICS, BYTE >
< NLS_NCHAR_CONV_EXCP, 0 >
< NLS_SORT, BINARY >
< OracleID, NYCATP1 >
< PassThrough, 0 >
< PermSize, 4000 >
< PermWarnThreshold, 90 >
< PrivateCommands, 0 >
< Preallocate, 0 >
< QueryThreshold, 0 >
< RACCallback, 0 >
< SQLQueryTimeout, 0 >
< TempSize, 514 >
< TempWarnThreshold, 90 >
< Temporary, 1 >
< TransparentLoad, 0 >
< TypeMode, 0 >
< UID, OS_OWNER >
ORACLE:
Hardware: Sunos 5.10; 24x1.8Ghz (unsure of type); 82 GB RAM
Version 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
Schema:
CREATE MATERIALIZED VIEW OS_OWNER.MV_US_DATAMART
TABLESPACE TS_OS
PARTITION BY RANGE (ORDER_DATE)
PARTITION MV_US_DATAMART_MINVAL VALUES LESS THAN (TO_DATE(' 2007-11-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_NOV_D1 VALUES LESS THAN (TO_DATE(' 2007-11-11 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_NOV_D2 VALUES LESS THAN (TO_DATE(' 2007-11-21 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_NOV_D3 VALUES LESS THAN (TO_DATE(' 2007-12-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_DEC_D1 VALUES LESS THAN (TO_DATE(' 2007-12-11 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_DEC_D2 VALUES LESS THAN (TO_DATE(' 2007-12-21 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_DEC_D3 VALUES LESS THAN (TO_DATE(' 2008-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_08_JAN_D1 VALUES LESS THAN (TO_DATE(' 2008-01-11 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_08_JAN_D2 VALUES LESS THAN (TO_DATE(' 2008-01-21 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_08_JAN_D3 VALUES LESS THAN (TO_DATE(' 2008-02-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_MAXVAL VALUES LESS THAN (MAXVALUE)
LOGGING
NOCOMPRESS
TABLESPACE TS_OS
NOCACHE
NOCOMPRESS
NOPARALLEL
BUILD DEFERRED
USING INDEX
TABLESPACE TS_OS_INDEX
REFRESH FAST ON DEMAND
WITH PRIMARY KEY
ENABLE QUERY REWRITE
AS
SELECT order_date, if_system,
GROUPING_ID (order_date,
if_system,
business_dim_id,
time_dim_id,
account_dim_id,
ordertype_dim_id,
instr_dim_id,
execution_dim_id,
exec_exchange_dim_id
) GROUPING_ID,
/* ============ DIMENSIONS ============ */
time_dim_id, business_dim_id, account_dim_id, ordertype_dim_id,
instr_dim_id, execution_dim_id, exec_exchange_dim_id,
/* ============ MEASURES ============ */
-- o.FX_RATE /* FX_RATE */,
COUNT (*) no_orders,
-- SUM(NO_ORDERS) NO_ORDERS,
-- COUNT(NO_ORDERS) CNT_NO_ORDERS,
SUM (filled_quantity) filled_quantity,
COUNT (filled_quantity) cnt_filled_quantity, SUM (quantity) quantity,
COUNT (quantity) cnt_quantity, SUM (commission) commission,
COUNT (commission) cnt_commission, SUM (fills_number) fills_number,
COUNT (fills_number) cnt_fills_number,
SUM (aggressive_fills) aggressive_fills,
COUNT (aggressive_fills) cnt_aggressive_fills,
SUM (fx_rate * filled_quantity * average_price) notional,
COUNT (fx_rate * filled_quantity * average_price) cnt_notional,
SUM (fx_rate * fills_number * average_price) total_price,
COUNT (fx_rate * fills_number * average_price) cnt_total_price,
SUM (CASE
WHEN order_status = 'C'
THEN 1
ELSE 0
END) cancelled_orders_count,
COUNT (CASE
WHEN order_status = 'C'
THEN 1
ELSE 0
END
) cnt_cancelled_orders_count,
-- SUM(t.FX_RATE*t.NO_FILLS*t.AVG_PRICE) AVERAGE_PRICE,
-- SUM(FILLS_NUMBER*AVERAGE_PRICE) STAGING_AVERAGE_PRICE,
-- COUNT(FILLS_NUMBER*AVERAGE_PRICE) CNT_STAGING_AVERAGE_PRICE,
SUM (routed_orders_no) routed_orders_no,
COUNT (routed_orders_no) cnt_routed_orders_no,
SUM (routed_liquidity_qty) routed_liquidity_qty,
COUNT (routed_liquidity_qty) cnt_routed_liquidity_qty,
SUM (removed_liquidity_qty) removed_liquidity_qty,
COUNT (removed_liquidity_qty) cnt_removed_liquidity_qty,
SUM (added_liquidity_qty) added_liquidity_qty,
COUNT (added_liquidity_qty) cnt_added_liquidity_qty,
SUM (agent_charges) agent_charges,
COUNT (agent_charges) cnt_agent_charges,
SUM (clearing_charges) clearing_charges,
COUNT (clearing_charges) cnt_clearing_charges,
SUM (execution_charges) execution_charges,
COUNT (execution_charges) cnt_execution_charges,
SUM (transaction_charges) transaction_charges,
COUNT (transaction_charges) cnt_transaction_charges,
SUM (order_management) order_management,
COUNT (order_management) cnt_order_management,
SUM (settlement_charges) settlement_charges,
COUNT (settlement_charges) cnt_settlement_charges,
SUM (recovered_agent) recovered_agent,
COUNT (recovered_agent) cnt_recovered_agent,
SUM (recovered_clearing) recovered_clearing,
COUNT (recovered_clearing) cnt_recovered_clearing,
SUM (recovered_execution) recovered_execution,
COUNT (recovered_execution) cnt_recovered_execution,
SUM (recovered_transaction) recovered_transaction,
COUNT (recovered_transaction) cnt_recovered_transaction,
SUM (recovered_ord_mgt) recovered_ord_mgt,
COUNT (recovered_ord_mgt) cnt_recovered_ord_mgt,
SUM (recovered_settlement) recovered_settlement,
COUNT (recovered_settlement) cnt_recovered_settlement,
SUM (client_agent) client_agent,
COUNT (client_agent) cnt_client_agent,
SUM (client_order_mgt) client_order_mgt,
COUNT (client_order_mgt) cnt_client_order_mgt,
SUM (client_exec) client_exec, COUNT (client_exec) cnt_client_exec,
SUM (client_trans) client_trans,
COUNT (client_trans) cnt_client_trans,
SUM (client_clearing) client_clearing,
COUNT (client_clearing) cnt_client_clearing,
SUM (client_settle) client_settle,
COUNT (client_settle) cnt_client_settle,
SUM (chargeable_taxes) chargeable_taxes,
COUNT (chargeable_taxes) cnt_chargeable_taxes,
SUM (vendor_charge) vendor_charge,
COUNT (vendor_charge) cnt_vendor_charge,
SUM (routing_charges) routing_charges,
COUNT (routing_charges) cnt_routing_charges,
SUM (recovered_routing) recovered_routing,
COUNT (recovered_routing) cnt_recovered_routing,
SUM (client_routing) client_routing,
COUNT (client_routing) cnt_client_routing,
SUM (ticket_charges) ticket_charges,
COUNT (ticket_charges) cnt_ticket_charges,
SUM (recovered_ticket_charges) recovered_ticket_charges,
COUNT (recovered_ticket_charges) cnt_recovered_ticket_charges
FROM us_datamart_raw
GROUP BY order_date,
if_system,
business_dim_id,
time_dim_id,
account_dim_id,
ordertype_dim_id,
instr_dim_id,
execution_dim_id,
exec_exchange_dim_id;
-- Note: Index I_SNAP$_MV_US_DATAMART will be created automatically
-- by Oracle with the associated materialized view.
CREATE UNIQUE INDEX OS_OWNER.MV_US_DATAMART_UDX ON OS_OWNER.MV_US_DATAMART
(ORDER_DATE, TIME_DIM_ID, BUSINESS_DIM_ID, ACCOUNT_DIM_ID, ORDERTYPE_DIM_ID,
INSTR_DIM_ID, EXECUTION_DIM_ID, EXEC_EXCHANGE_DIM_ID)
NOLOGGING
NOPARALLEL
COMPRESS 7;
No of rows: 2228558
The query (taken Mondrian) I run against each of them is:
select sum("MV_US_DATAMART"."NOTIONAL") as "m0"
--, sum("MV_US_DATAMART"."FILLED_QUANTITY") as "m1"
--, sum("MV_US_DATAMART"."AGENT_CHARGES") as "m2"
--, sum("MV_US_DATAMART"."CLEARING_CHARGES") as "m3"
--, sum("MV_US_DATAMART"."EXECUTION_CHARGES") as "m4"
--, sum("MV_US_DATAMART"."TRANSACTION_CHARGES") as "m5"
--, sum("MV_US_DATAMART"."ROUTING_CHARGES") as "m6"
--, sum("MV_US_DATAMART"."ORDER_MANAGEMENT") as "m7"
--, sum("MV_US_DATAMART"."SETTLEMENT_CHARGES") as "m8"
--, sum("MV_US_DATAMART"."COMMISSION") as "m9"
--, sum("MV_US_DATAMART"."RECOVERED_AGENT") as "m10"
--, sum("MV_US_DATAMART"."RECOVERED_CLEARING") as "m11"
--,sum("MV_US_DATAMART"."RECOVERED_EXECUTION") as "m12"
--,sum("MV_US_DATAMART"."RECOVERED_TRANSACTION") as "m13"
--, sum("MV_US_DATAMART"."RECOVERED_ROUTING") as "m14"
--, sum("MV_US_DATAMART"."RECOVERED_ORD_MGT") as "m15"
--, sum("MV_US_DATAMART"."RECOVERED_SETTLEMENT") as "m16"
--, sum("MV_US_DATAMART"."RECOVERED_TICKET_CHARGES") as "m17"
--,sum("MV_US_DATAMART"."TICKET_CHARGES") as "m18"
--, sum("MV_US_DATAMART"."VENDOR_CHARGE") as "m19"
from "OS_OWNER"."MV_US_DATAMART" "MV_US_DATAMART"
where I uncomment a column at a time and rerun. I improved the TimesTen results since my first post, by retyping the NUMBER columns to BINARY_FLOAT. The results I got were:
No Columns ORACLE TimesTen
1 1.05 0.94
2 1.07 1.47
3 2.04 1.8
4 2.06 2.08
5 2.09 2.4
6 3.01 2.67
7 4.02 3.06
8 4.03 3.37
9 4.04 3.62
10 4.06 4.02
11 4.08 4.31
12 4.09 4.61
13 5.01 4.76
14 5.02 5.06
15 5.04 5.25
16 5.05 5.48
17 5.08 5.84
18 6 6.21
19 6.02 6.34
20 6.04 6.75 -
Create index is taking more time
Hi,
One of the concurrent program is taking more time , We generate the trace file and found that the create index is taking more time.
Below is from the trace file and such type of index creation is happening lot of time in Oracle standard program.
Can somebody let me know why there is a big difference between cpu and elapse time.
We are seeing the PX Deq: Execute Reply Event as well.look idle time for database.
Please let me know which parameter of the database is affecting this.
CREATE INDEX ITEM_CATEGORIES_N2_BD9 ON ITEM_CATEGORIES_BD9(CATEGORY_SET_ID,
SR_CATEGORY_ID,ORGANIZATION_ID,SR_INSTANCE_ID) PARALLEL TABLESPACE MSCX
STORAGE( INITIAL 40960 NEXT 33554432 PCTINCREASE 0) PCTFREE 10 INITRANS 11
MAXTRANS 255
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 3 0 0
Execute 1 0.35 364.82 131168 117945 60324 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.35 364.83 131168 117948 60324 0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 80 (recursive depth: 2)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
reliable message 1 0.00 0.00
enq: KO - fast object checkpoint 1 0.01 0.01
PX Deq: Join ACK 6 0.00 0.00
PX Deq Credit: send blkd 112 0.00 0.01
PX qref latch 7 0.00 0.00
PX Deq: Parse Reply 3 0.00 0.00
PX Deq: Execute Reply 604 1.96 364.42
log file sync 1 0.00 0.00
PX Deq: Signal ACK 1 0.00 0.00
latch: session allocation 2 0.00 0.00
Regards,user12121524 wrote:
CREATE INDEX ITEM_CATEGORIES_N2_BD9 ON ITEM_CATEGORIES_BD9(CATEGORY_SET_ID,
SR_CATEGORY_ID,ORGANIZATION_ID,SR_INSTANCE_ID) PARALLEL TABLESPACE MSCX
STORAGE( INITIAL 40960 NEXT 33554432 PCTINCREASE 0) PCTFREE 10 INITRANS 11
MAXTRANS 255
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 3 0 0
Execute 1 0.35 364.82 131168 117945 60324 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.35 364.83 131168 117948 60324 0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 80 (recursive depth: 2)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
reliable message 1 0.00 0.00
enq: KO - fast object checkpoint 1 0.01 0.01
PX Deq: Join ACK 6 0.00 0.00
PX Deq Credit: send blkd 112 0.00 0.01
PX qref latch 7 0.00 0.00
PX Deq: Parse Reply 3 0.00 0.00
PX Deq: Execute Reply 604 1.96 364.42
log file sync 1 0.00 0.00
PX Deq: Signal ACK 1 0.00 0.00
latch: session allocation 2 0.00 0.00
What you've given us is the query co-ordinator trace, which basically tells us that the the coordinator waited 364 seconds for the PX slaves to tell it that they had completed their tasks ("PX Deq: Execute Reply" time). You need to look at the slave traces to find out where they spent their time - and that's probably not going to be easy if there are lots of parallel pieces of processing going on.
If you want to do some debugging (in general) one option is to add a query against V$pq_tqstat after each piece of parallel processing and log the results to a named file, or write them to a table with a tag, as this will tell you how many slaves were involved, how, and what the distribution of work and time was.
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
http://www.jlcomp.demon.co.uk
To post code, statspack/AWR report, execution plans or trace files, start and end the section with the tag {noformat}{noformat} (lowercase, curly brackets, no spaces) so that the text appears in fixed format.
"Science is more than a body of knowledge; it is a way of thinking"
Carl Sagan -
Expdp taking more time to start export
Hi Gurus
my database oracle 10.2.0.3 in AIX
I have started expdp to export selective around 130 tables but it is taking more time to start , almost 20 min passed since it start.
$ expdp system/*** parfile=parfile.par
Export: Release 10.2.0.3.0 - 64bit Production on Friday, 22 June, 2012 17:21:26
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
Starting "SYSTEM"."SYS_EXPORT_TABLE_02": system/******** parfile=parfile.par
Estimate in progress using BLOCKS method...
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
If share me tips and let me know the reason
Regards
Rabiuser623166 wrote:
Hi Gurus
my database oracle 10.2.0.3 in AIX
I have started expdp to export selective around 130 tables but it is taking more time to start , almost 20 min passed since it start.
$ expdp system/*** parfile=parfile.par
Export: Release 10.2.0.3.0 - 64bit Production on Friday, 22 June, 2012 17:21:26
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
Starting "SYSTEM"."SYS_EXPORT_TABLE_02": system/******** parfile=parfile.par
Estimate in progress using BLOCKS method...
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
I am not sure that this is enough information for us to suggest something. For starters, can you try selecting less tables than 120 and see what's going on?
Aman.... -
Currency translation taking more time at first time in the report
Hi All,
Here is an issue regarding the currency translation in the report. when we click on the currency translation from the contaxt menu on the report, its taking more time for the first time to get the selection options. But it is fast from the second time onwards. It will be not user friendly if its takes more time for the first time. Is there any way to fast up the processing time for the first time when i go for the "currency translation" option at report level for the first time.
let me know why it takes more time for the first time when we go for this option at report level.
Thanks,
JackOnce again from the top.
This is undoubtedly not a database issue.
I doubt you can fix it in the database.
You can, however, spend a lot of hours asking questions and poking around if you are a consultant paid by the hour.
But as long as you are looking for something to do here are some that won't fix the problem but may be worth a few minutes of your time.
WHERE 1 = 1Are you kidding? Drop this nonsense. The Oracle optimizer is not brain dead. If it were my database I would also drop the parallel hint like a bad habit.
/*+ parallel(rp1, 8) */Again the Oracle optimizer is not brain dead. Ask for parallel threads that don't exist and the database will just queue your SQL and let it sit there until sufficient resources become available. -
hi all,
i am using Forms [32 Bit] Version 6.0.8.24.1 (Production)
i am ultimate task is to read the data from excel and insert into the table. if any duplication of records then stop the process and tell the user that which records are repating..
i have used ole2 package to read data from excel.
i have two pl/sql table for further process.
one table is to inser whatever the data come from excel. 2nd table is to check for the existance of current record with the previously inserted record and 3rd table is do store the duplicated records.
i am inserting each record as it is to the table1. in the table 2 checking for the existance of the record. if current record match with the previous record then store that record into the 3 record.
at the end if the error_table(3rd table) row count is 0 then no duplication then write the 1st table data into the forms and save,else display the table 3(error table) data into the form and say to the user that these records are duplicating.
but its taking more time time.
can anybody tell me the logic which reduces the time consuption(better performance)
Thanks..hi,
i don't think its a sql issue because if i entered manually(not through the excel upload) its just working fine. the form is database block. so i have not written any sql.
what i am duing is upload data from excel to plsql table check for the duplication if any duplication found display the error_plsql table else display the first table as i mentioned earlier. the 2nd table is to check for the existance of the current record(since i am reading from excel record by record).
Thanks.. -
Which statement is taking more time in a block?
Hi,
I have a plsql block with thousands of sql statements in it, line by line.
My query is how can i know which particular sql statement is taking more time.
Thanks,
VInod910575 wrote:
This is not the answer i expected.Having a 1000 SQLs statements in a single PL/SQL does not make any sense. Fact.
This is not how one modularise software. And modularisation is a critically important fundamental.
Each SQL means I/O. I/O is the single most expensive database operation. More I/O means slower performance.
So why is a 1000+ SQL statements needed? Do these pull data into PL/SQL? If so, why? What does PL/SQL do with the data returned by these SQLs? Do the SQLs use bind variables? Can the SQLs be combined? What are the business requirements that need to be met?
I just want to find which sql statement is taking more time in a procedure/bock.Not the correct approach. Performance need to look at the COMPLETE process. Not a single step in the process.
Performance is a result of a sound design and proper implementation of this design into programming language code. It is not focusing on a single line of code and saying that is the problem and need to be fixed. The problem can be in the design. Can be in how that was written. And not in a single line of code.
And seeing that you have 1000+ SQL statements in a single PL/SQL block - that IS an indication of a basic design flaw. -
LCM utility taking more time to start
Hi All,
In Hyperion System 9.3.1 when running the LCMUtility.bat file in Hyperion Home\BIPLUS\bin folder it is taking nearly 8-10 minutes to start up the process. The shared services, IR, Core services are in the single box. Even though it is taking time to initialize, it ends with success.
Could anyone please let me know what could be the possible reason why it is taking 8-10 minutes of time to start the process?
Thanks,
Sreeuser623166 wrote:
Hi Gurus
my database oracle 10.2.0.3 in AIX
I have started expdp to export selective around 130 tables but it is taking more time to start , almost 20 min passed since it start.
$ expdp system/*** parfile=parfile.par
Export: Release 10.2.0.3.0 - 64bit Production on Friday, 22 June, 2012 17:21:26
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
Starting "SYSTEM"."SYS_EXPORT_TABLE_02": system/******** parfile=parfile.par
Estimate in progress using BLOCKS method...
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
I am not sure that this is enough information for us to suggest something. For starters, can you try selecting less tables than 120 and see what's going on?
Aman.... -
Admin server taking more time to start
Hi All,
I installed OIM 11g R2 in windows server2008 ,
while starting the admin server it is taking the more time, .
Steps i have done.
changed memory parameters for setSOADomainEnv, setOIMDomainEnv, oimenv.bat files.
while starting the admin server it is showing the memory parameters are Xms768m.....xms1024m like that.
can anyone please suggest what changes needs to do to run fast
Thanks,
Valliuser623166 wrote:
Hi Gurus
my database oracle 10.2.0.3 in AIX
I have started expdp to export selective around 130 tables but it is taking more time to start , almost 20 min passed since it start.
$ expdp system/*** parfile=parfile.par
Export: Release 10.2.0.3.0 - 64bit Production on Friday, 22 June, 2012 17:21:26
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
Starting "SYSTEM"."SYS_EXPORT_TABLE_02": system/******** parfile=parfile.par
Estimate in progress using BLOCKS method...
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
I am not sure that this is enough information for us to suggest something. For starters, can you try selecting less tables than 120 and see what's going on?
Aman.... -
Custom Report taking more time to complete Normat
Hi All,
Custom report(Aging Report) in oracle is taking more time to complete Normal.
In one instance, the same report is taking 5 min and the other instance this is taking 40-50 min to complete.
We have enabled the trace and checked the trace file, but all the queries are working fine.
Could you please suggest me regarding this issue.
Thanks in advance!!TKPROF: Release 10.1.0.5.0 - Production on Tue Jun 5 10:49:32 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Sort options: prsela exeela fchela
count = number of times OCI procedure was executed
cpu = cpu time in seconds executing
elapsed = elapsed time in seconds executing
disk = number of physical reads of buffers from disk
query = number of buffers gotten for consistent read
current = number of buffers gotten in current mode (usually for update)
rows = number of rows processed by the fetch or execute call
Error in CREATE TABLE of EXPLAIN PLAN table: APPS.prof$plan_table
ORA-00922: missing or invalid option
parse error offset: 1049
EXPLAIN PLAN option disabled.
SELECT DISTINCT OU.ORGANIZATION_ID , OU.BUSINESS_GROUP_ID
FROM
HR_OPERATING_UNITS OU WHERE OU.SET_OF_BOOKS_ID =:B1
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 1 0.00 0.05 11 22 0 3
total 3 0.00 0.05 11 22 0 3
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173 (recursive depth: 1)
Rows Row Source Operation
3 HASH UNIQUE (cr=22 pr=11 pw=0 time=52023 us cost=10 size=66 card=1)
3 NESTED LOOPS (cr=22 pr=11 pw=0 time=61722 us)
3 NESTED LOOPS (cr=20 pr=11 pw=0 time=61672 us cost=9 size=66 card=1)
3 NESTED LOOPS (cr=18 pr=11 pw=0 time=61591 us cost=7 size=37 card=1)
3 NESTED LOOPS (cr=16 pr=11 pw=0 time=61531 us cost=7 size=30 card=1)
3 TABLE ACCESS BY INDEX ROWID HR_ORGANIZATION_INFORMATION (cr=11 pr=9 pw=0 time=37751 us cost=6 size=22 card=1)
18 INDEX RANGE SCAN HR_ORGANIZATION_INFORMATIO_FK1 (cr=1 pr=1 pw=0 time=17135 us cost=1 size=0 card=18)(object id 43610)
3 TABLE ACCESS BY INDEX ROWID HR_ALL_ORGANIZATION_UNITS (cr=5 pr=2 pw=0 time=18820 us cost=1 size=8 card=1)
3 INDEX UNIQUE SCAN HR_ORGANIZATION_UNITS_PK (cr=2 pr=0 pw=0 time=26 us cost=0 size=0 card=1)(object id 43657)
3 INDEX UNIQUE SCAN HR_ALL_ORGANIZATION_UNTS_TL_PK (cr=2 pr=0 pw=0 time=32 us cost=0 size=7 card=1)(object id 44020)
3 INDEX RANGE SCAN HR_ORGANIZATION_INFORMATIO_FK2 (cr=2 pr=0 pw=0 time=52 us cost=1 size=0 card=1)(object id 330960)
3 TABLE ACCESS BY INDEX ROWID HR_ORGANIZATION_INFORMATION (cr=2 pr=0 pw=0 time=26 us cost=2 size=29 card=1)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 11 0.01 0.05
asynch descriptor resize 2 0.00 0.00
INSERT INTO FND_LOG_MESSAGES ( ECID_ID, ECID_SEQ, CALLSTACK, ERRORSTACK,
MODULE, LOG_LEVEL, MESSAGE_TEXT, SESSION_ID, USER_ID, TIMESTAMP,
LOG_SEQUENCE, ENCODED, NODE, NODE_IP_ADDRESS, PROCESS_ID, JVM_ID, THREAD_ID,
AUDSID, DB_INSTANCE, TRANSACTION_CONTEXT_ID )
VALUES
( SYS_CONTEXT('USERENV', 'ECID_ID'), SYS_CONTEXT('USERENV', 'ECID_SEQ'),
:B16 , :B15 , SUBSTRB(:B14 ,1,255), :B13 , SUBSTRB(:B12 , 1, 4000), :B11 ,
NVL(:B10 , -1), SYSDATE, FND_LOG_MESSAGES_S.NEXTVAL, :B9 , SUBSTRB(:B8 ,1,
60), SUBSTRB(:B7 ,1,30), SUBSTRB(:B6 ,1,120), SUBSTRB(:B5 ,1,120),
SUBSTRB(:B4 ,1,120), :B3 , :B2 , :B1 ) RETURNING LOG_SEQUENCE INTO :O0
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 20 0.00 0.03 4 1 304 20
Fetch 0 0.00 0.00 0 0 0 0
total 21 0.00 0.03 4 1 304 20
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173 (recursive depth: 1)
Rows Row Source Operation
1 LOAD TABLE CONVENTIONAL (cr=1 pr=4 pw=0 time=36498 us)
1 SEQUENCE FND_LOG_MESSAGES_S (cr=0 pr=0 pw=0 time=24 us)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 4 0.01 0.03
SELECT MESSAGE_TEXT, MESSAGE_NUMBER, TYPE, FND_LOG_SEVERITY, CATEGORY,
SEVERITY
FROM
FND_NEW_MESSAGES M, FND_APPLICATION A WHERE :B3 = M.MESSAGE_NAME AND :B2 =
M.LANGUAGE_CODE AND :B1 = A.APPLICATION_SHORT_NAME AND M.APPLICATION_ID =
A.APPLICATION_ID
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 2 0.00 0.00 0 0 0 0
Fetch 2 0.00 0.03 4 12 0 2
total 5 0.00 0.03 4 12 0 2
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173 (recursive depth: 1)
Rows Row Source Operation
1 NESTED LOOPS (cr=6 pr=2 pw=0 time=15724 us cost=3 size=134 card=1)
1 TABLE ACCESS BY INDEX ROWID FND_APPLICATION (cr=2 pr=0 pw=0 time=20 us cost=1 size=9 card=1)
1 INDEX UNIQUE SCAN FND_APPLICATION_U3 (cr=1 pr=0 pw=0 time=9 us cost=0 size=0 card=1)(object id 33993)
1 TABLE ACCESS BY INDEX ROWID FND_NEW_MESSAGES (cr=4 pr=2 pw=0 time=15693 us cost=2 size=125 card=1)
1 INDEX UNIQUE SCAN FND_NEW_MESSAGES_PK (cr=3 pr=1 pw=0 time=6386 us cost=1 size=0 card=1)(object id 34367)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 4 0.00 0.03
DELETE FROM MO_GLOB_ORG_ACCESS_TMP
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.02 3 4 4 1
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.02 3 4 4 1
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173 (recursive depth: 1)
Rows Row Source Operation
0 DELETE MO_GLOB_ORG_ACCESS_TMP (cr=4 pr=3 pw=0 time=29161 us)
1 TABLE ACCESS FULL MO_GLOB_ORG_ACCESS_TMP (cr=3 pr=2 pw=0 time=18165 us cost=2 size=13 card=1)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 3 0.01 0.02
SET TRANSACTION READ ONLY
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.01 0 0 0 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.01 0 0 0 0
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 1 0.00 0.00
SQL*Net message from client 1 0.00 0.00
begin Fnd_Concurrent.Init_Request; end;
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 148 0 1
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.00 0 148 0 1
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
log file sync 1 0.01 0.01
SQL*Net message to client 1 0.00 0.00
SQL*Net message from client 1 0.00 0.00
declare X0rv BOOLEAN; begin X0rv := FND_INSTALLATION.GET(:APPL_ID,
:DEP_APPL_ID, :STATUS, :INDUSTRY); :X0 := sys.diutil.bool_to_int(X0rv);
end;
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 9 0 1
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.00 0 9 0 1
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 8 0.00 0.00
SQL*Net message from client 8 0.00 0.00
begin fnd_global.bless_next_init('FND_PERMIT_0000');
fnd_global.initialize(:session_id, :user_id, :resp_id, :resp_appl_id,
:security_group_id, :site_id, :login_id, :conc_login_id, :prog_appl_id,
:conc_program_id, :conc_request_id, :conc_priority_request, :form_id,
:form_application_id, :conc_process_id, :conc_queue_id, :queue_appl_id,
:server_id); fnd_profile.put('ORG_ID', :org_id);
fnd_profile.put('MFG_ORGANIZATION_ID', :mfg_org_id);
fnd_profile.put('MFG_CHART_OF_ACCOUNTS_ID', :coa);
fnd_profile.put('APPS_MAINTENANCE_MODE', :amm); end;
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 8 0 1
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.00 0 8 0 1
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 1 0.00 0.00
SQL*Net message from client 1 0.00 0.00
SELECT FPI.STATUS, FPI.INDUSTRY, FPI.PRODUCT_VERSION, FOU.ORACLE_USERNAME,
FPI.TABLESPACE, FPI.INDEX_TABLESPACE, FPI.TEMPORARY_TABLESPACE,
FPI.SIZING_FACTOR
FROM
FND_PRODUCT_INSTALLATIONS FPI, FND_ORACLE_USERID FOU, FND_APPLICATION FA
WHERE FPI.APPLICATION_ID = FA.APPLICATION_ID AND FPI.ORACLE_ID =
FOU.ORACLE_ID AND FA.APPLICATION_SHORT_NAME = :B1
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 2 0.00 0.00 0 7 0 1
total 4 0.00 0.00 0 7 0 1
Misses in library cache during parse: 1
Misses in library cache during execute: 1
Optimizer mode: ALL_ROWS
Parsing user id: 173 (recursive depth: 1)
Rows Row Source Operation
1 NESTED LOOPS (cr=7 pr=0 pw=0 time=89 us)
1 NESTED LOOPS (cr=6 pr=0 pw=0 time=93 us cost=4 size=76 card=1)
1 NESTED LOOPS (cr=5 pr=0 pw=0 time=77 us cost=3 size=67 card=1)
1 TABLE ACCESS BY INDEX ROWID FND_APPLICATION (cr=2 pr=0 pw=0 time=19 us cost=1 size=9 card=1)
1 INDEX UNIQUE SCAN FND_APPLICATION_U3 (cr=1 pr=0 pw=0 time=9 us cost=0 size=0 card=1)(object id 33993)
1 TABLE ACCESS BY INDEX ROWID FND_PRODUCT_INSTALLATIONS (cr=3 pr=0 pw=0 time=51 us cost=2 size=58 card=1)
1 INDEX RANGE SCAN FND_PRODUCT_INSTALLATIONS_PK (cr=2 pr=0 pw=0 time=27 us cost=1 size=0 card=1)(object id 22583)
1 INDEX UNIQUE SCAN FND_ORACLE_USERID_U1 (cr=1 pr=0 pw=0 time=7 us cost=0 size=0 card=1)(object id 22597)
1 TABLE ACCESS BY INDEX ROWID FND_ORACLE_USERID (cr=1 pr=0 pw=0 time=7 us cost=1 size=9 card=1)
SELECT P.PID, P.SPID, AUDSID, PROCESS, SUBSTR(USERENV('LANGUAGE'), INSTR(
USERENV('LANGUAGE'), '.') + 1)
FROM
V$SESSION S, V$PROCESS P WHERE P.ADDR = S.PADDR AND S.AUDSID =
USERENV('SESSIONID')
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 1 0.00 0.00 0 0 0 1
total 3 0.00 0.00 0 0 0 1
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173 (recursive depth: 1)
Rows Row Source Operation
1 NESTED LOOPS (cr=0 pr=0 pw=0 time=1883 us cost=1 size=108 card=2)
1 HASH JOIN (cr=0 pr=0 pw=0 time=1869 us cost=1 size=100 card=2)
1 NESTED LOOPS (cr=0 pr=0 pw=0 time=1059 us cost=0 size=58 card=2)
182 FIXED TABLE FULL X$KSLWT (cr=0 pr=0 pw=0 time=285 us cost=0 size=1288 card=161)
1 FIXED TABLE FIXED INDEX X$KSUSE (ind:1) (cr=0 pr=0 pw=0 time=617 us cost=0 size=21 card=1)
181 FIXED TABLE FULL X$KSUPR (cr=0 pr=0 pw=0 time=187 us cost=0 size=10500 card=500)
1 FIXED TABLE FIXED INDEX X$KSLED (ind:2) (cr=0 pr=0 pw=0 time=4 us cost=0 size=4 card=1)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
asynch descriptor resize 2 0.00 0.00
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 6 0.00 0.00 0 0 0 0
Execute 6 0.01 0.02 0 165 0 4
Fetch 1 0.00 0.00 0 0 0 1
total 13 0.01 0.02 0 165 0 5
Misses in library cache during parse: 0
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 37 0.00 0.00
SQL*Net message from client 37 1.21 2.19
log file sync 1 0.01 0.01
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 49 0.00 0.00 0 0 0 0
Execute 89 0.01 0.07 7 38 336 24
Fetch 29 0.00 0.09 15 168 0 27
total 167 0.02 0.16 22 206 336 51
Misses in library cache during parse: 3
Misses in library cache during execute: 1
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
asynch descriptor resize 6 0.00 0.00
db file sequential read 22 0.01 0.14
48 user SQL statements in session.
1 internal SQL statements in session.
49 SQL statements in session.
0 statements EXPLAINed in this session.
Trace file compatibility: 10.01.00
Sort options: prsela exeela fchela
1 session in tracefile.
48 user SQL statements in trace file.
1 internal SQL statements in trace file.
49 SQL statements in trace file.
48 unique SQL statements in trace file.
928 lines in trace file.
1338833753 elapsed seconds in trace file. -
INSTR() function is taking more time
im using the below query select query in my procedure.
select distinct SUPPLIER_CIRCUIT_ID from SUPPLIER_DATA
where INSTR(i.SYSTEM_CIRCUIT_ID,SUPPLIER_CIRCUIT_ID) > 0;
I am taking SYSTEM_CIRCUIT_ID in cursor.
This query is taking more time. Is that possiblt to create function based index and speed up the query?Hi,
Welcome to the forum!
993620 wrote:
im using the below query select query in my procedure.
select distinct SUPPLIER_CIRCUIT_ID from SUPPLIER_DATA
where INSTR(i.SYSTEM_CIRCUIT_ID,SUPPLIER_CIRCUIT_ID) > 0;
I am taking SYSTEM_CIRCUIT_ID in cursor.Show exactly what you're doing.
Whenever you have a problem, post a complete test script that people can run to re-create the problem and test their ideas.
See te forum FAQ {message:id=9360002}
This query is taking more time. Is that possiblt to create function based index and speed up the query?Sorry, unless you doing something very specific (such as alwyas looking for the same sub-string) then a function-based index won't help.
Oracle sells a separate product, called Oracle Text, for this kind of searching.
You might try LIKE:
WHERE i.SYSTEM_CIRCUIT_ID LIKE '%' || SUPPLIER_CIRCUIT_ID || '%'If you're using a cursor, then that's probably slowing the process down much more than the part you're showing. -
Hi all,
db:oracle 9i
I am facing below query prob.
prob is that query is taking more time 45 min than earliar (10 sec).
please any one suggest me .....
SQL> SELECT MAX (tdar1.ID) ID, tdar1.request_id, tdar1.lolm_transaction_id,
2 tdar1.transaction_version
3 FROM transaction_data_arc tdar1
4 WHERE tdar1.transaction_name ='O96U '
5 AND tdar1.transaction_type = 'REQUEST'
6 AND tdar1.message_type_code ='PCN'
7 AND NOT EXISTS (
8 SELECT NULL
9 FROM transaction_data_arc tdar2
10 WHERE tdar2.request_id = tdar1.request_id
11 AND tdar2.lolm_transaction_id != tdar1.lolm_transaction_id
12 AND tdar2.ID > tdar1.ID)
13 GROUP BY tdar1.request_id,
14 tdar1.lolm_transaction_id,
15 tdar1.transaction_version;
Execution Plan
0 SELECT STATEMENT Optimizer=CHOOSE (Cost=17 Card=1 Bytes=42)
1 0 SORT (GROUP BY) (Cost=12 Card=1 Bytes=42)
2 1 FILTER
3 2 TABLE ACCESS (BY INDEX ROWID) OF 'TRANSACTION_DATA_ARC
' (Cost=1 Card=1 Bytes=42)
4 3 INDEX (RANGE SCAN) OF 'NK_TDAR_2' (NON-UNIQUE) (Cost
=3 Card=1)
5 2 TABLE ACCESS (BY INDEX ROWID) OF 'TRANSACTION_DATA_ARC
' (Cost=5 Card=918 Bytes=20196)
6 5 INDEX (RANGE SCAN) OF 'NK_TDAR_7' (NON-UNIQUE) (Cost
=8 Card=4760)prob is that query is taking more time 45 min than earliar (10 sec).Then something must have changed (data growth/stale statistics/...?).
You should post as much details as possible, how and what it is described in the FAQ, see:
*3. How to improve the performance of my query? / My query is running slow*.
When your query takes too long...
How to post a SQL statement tuning request
SQL and PL/SQL FAQ
Also, given your database version, using NOT IN instead of NOT EXISTS might make a difference (but they're not the same).
See: SQL and PL/SQL FAQ
Maybe you are looking for
-
Issue in creating sales order using process_header API (web service)
Hi All, I am trying to create sales order header using web service call to OE_ORDER_PUB.Process_header API. When I pass the inputs and test the service,I get output with return_status='S'. But no record falls at the OE_ORDER_HEADER_ALL table. I cant
-
I think I should just reinstall everything nothing works how do I do iy?
-
I am using a mac mini. I want to change the file size in iMovie to MPEG so I can burn the movie to a disc. There is no "Save As" that I can find. What do I do?
-
JDBC Lookup with BPM (no operation mapping)
HI, In my scenario i have to use JDBC lookup to get the data ,but here i do not have operation mapping ( this part i am doing in BPM).. to select JDBC Look up communication channel. In BPM i am facing issue to select lookup parameters. -->In
-
I have a G5 imac 3 1/2 years old and where do I find what card is installed from the factory? 802 n or 802 g or what the card is. Thank You Dcik