Database starting error
hi all
i am using oracle 10g and when i want to start the enterprise manager it gives me the error below
Dictionary and Library Cache Statistics error
please help me with that
Thanks
Edited by: khalidoracleit on Apr 14, 2010 4:28 AM
Hi,
Can you provide the exact oracle error code.
- Pavan Kumar N
- ORACLE OCP - 9i/10g
https://www.oracleinternals.blogspot.com
Similar Messages
-
Database Connection Error:BAPI Error #0
I have a problem when I preview a report in Crystal Reports 2008 using BW MDX Query I had recieved the following messages:
1.Failed to retrieve data from database
and then when I click ok
2.Database Connection Error:BAPI Error #0
Error occurred when starting the parser:timeout during allocate / CPIC-CALL'ThSAPCMRCV'
I copied the query of crystal report and I execute it inside the transaction of mdxtest
SELECT NON EMPTY EXCEPT([0CALMONTH].MEMBERS, {[0CALMONTH].[All]}) ON ROWS FROM [USD_SD_C0/RPT_1] SAP VARIABLES [!V000001] INCLUDING [0CALMONTH].[200401]
I found the debugger had stopped in the line Break when I click on F8
I recieve the following error
Error occurred when starting the parser: timeout
during allocate / CPIC-CALL: 'ThSAPCMRCV'
Please anybody can help meDear Ingo
I had read this note
I applied the following:
1.I didn't found the lrfc32.dll in the windows/system32 in my BW server so I asked my basis administrator to upgrade the kernel
2.after this step I didn't find it again so I had copied the file from the new kernel and copied it to system32 and sysWow
3.I register successfuly the lrfc32.dll using the commanf regsvr c:/windows/system32/lfrc32.dll
(note: this step didn't succeed until I had installed SAP GUI in BW server because as I observed that there is a need for C++ compiler which is installed by default when you install GUI)
after all of this I cannot run any crystal report based on any BW query
So Please anyboday can help -
Hello,
We have crystal reports published on the BOBJ system and the datasource is SAP BI system . The reports were working fine
untill last monday when they started giving error " Database Connection Error " .
This is what happening, when we run the crystal report , it will come up with a pop up for selection and upon giving the selection and click on execute , it is giving error.
To start we have this issue in BOBJ dev system , but now we have the same issue in QA and Prod as well. I suspected
this has to do with license keys, but my BOBJ Admin *** basis team thinks otherwise.
I couldnt think of would have gone wrong or missing . Any ideas will be appreciated.
Thanks,
Ravi.Ingo,
I tested the reports using the crystal designer, and they ran fine without issues . The same report when we run on BOBJ/infoview it is giving data base connection error. The same is happening across all the 3 systems( Dev, QA and Prod ).
I also tested the verify database on the crystal designer and it say " data is up to date".
As the client level integration seems to be working fine, I'm thinking there is a issue with server level integration.
Can you through some insight into the checks we can do get to the bottom?
Thanks,
Raju. -
Unexpected database connector error, when data sent from POJO.. Plz Help Me
Hi, Please Help me about this, I have started learning to develop a crystal report with java swing in crystal report integrated eclipse IDE 3.5 but when i am trying to send data from pojo to report file its giving error like "Unexpected database connector error" and Error code:-2147215349 Error code name:docNotReady.... please hlep me... i uploaded my program and the link to download my file is :
http://www.4shared.com/file/mz8O4iQi/SimplePojoReport.html
and i am not using any database just setting the data in the pojo...
i wrote my problem here before, but nobody replied me... so this time i uploaded my project.. please help me...
thanks...Hell Ted Ueda,
Thanks for your reply, and did you downloaded my project files ? if not then please download it first.. because i retrieving data from the POJO not from any database.. from database its working fine but in case of POJO its not, because i wanna retrieve data dynamically from directly fields to report, means that user will fill all the information in the text box (Swing) and when he click on the button then the data from the text box should be pushed to report file and also should have to saved in the database.. so please download my project file... and help me...
link : http://www.4shared.com/file/mz8O4iQi/SimplePojoReport.html
thanking you..
Arun... -
Database Started In Restricted Mode...
Dear Exports,
We are using Oracle 10gR2 on Windows server 2008. My database size is approximately 2tb. Now we are going to setup Dataguard for our primary. We started the database with the changer parameters for dataguard and create spfile from pfile. And started the database with Spfile. But after some time i noticed that the database started automatically in Restricted mode. As in our database Previously dataguard was configured, due to the some problem that setup is not working and the logs are not applied in Standby server. I thought may be for this reason database going to restricted mode automatically so i set the log_archive_dest_state_2='DEFFER' and Now I scanned the whore alert.log file and found the same situation of restricted is happening from Jan 2010. Please Suggest some solution how i can over come the problem.
The alertlog when i started the database recently...
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Fri Apr 12 19:12:39 2013
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Autotune of undo retention is turned on.
IMODE=BR
ILAT =97
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.4.0.
System parameters with non-default values:
processes = 800
sessions = 885
sga_max_size = 10737418240
__shared_pool_size = 1325400064
__large_pool_size = 16777216
__java_pool_size = 16777216
__streams_pool_size = 0
sga_target = 8589934592
control_files = G:\ORADATA\CONTROL01.CTL, G:\ORADATA\CONTROL02.CTL, G:\ORADATA\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 7214202880
compatible = 10.2.0.3.0
log_archive_config = DG_CONFIG=(orcl,stdby)
log_archive_dest_1 = LOCATION=I:\archive_log VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=orcl
log_archive_dest_2 = SERVICE=stdby NOAFFIRM ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=stdby
log_archive_dest_state_1 = enable
log_archive_max_processes= 30
log_archive_format = ARC%D_%s_%R.%T
fal_client = orcl
fal_server = stdby
db_file_multiblock_read_count= 16
db_recovery_file_dest = D:\oracle\product\10.2.0\flash_recovery_area
db_recovery_file_dest_size= 2147483648
standby_file_management = AUTO
undo_management = AUTO
undo_tablespace = UNDOTBS1
undo_retention = 5400
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=orclXDB)
local_listener = (ADDRESS=(PROTOCOL=TCP)(HOST=192.168.12.86)(PORT=1521))
job_queue_processes = 10
audit_file_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\ADUMP
background_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\BDUMP
user_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\UDUMP
core_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\CDUMP
db_name = orcl
open_cursors = 500
pga_aggregate_target = 10737418240
PMON started with pid=2, OS id=14328
PSP0 started with pid=3, OS id=15420
MMAN started with pid=4, OS id=9092
DBW0 started with pid=5, OS id=12360
DBW1 started with pid=6, OS id=18112
LGWR started with pid=7, OS id=18360
CKPT started with pid=8, OS id=18448
SMON started with pid=9, OS id=17160
RECO started with pid=10, OS id=18512
CJQ0 started with pid=11, OS id=19324
MMON started with pid=12, OS id=14380
Fri Apr 12 19:12:40 2013
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=13, OS id=2996
Fri Apr 12 19:12:40 2013
starting up 1 shared server(s) ...
Fri Apr 12 19:12:41 2013
ALTER DATABASE MOUNT
Fri Apr 12 19:12:45 2013
Setting recovery target incarnation to 2
Fri Apr 12 19:12:45 2013
Successful mount of redo thread 1, with mount id 1340307369
Fri Apr 12 19:12:45 2013
Allocated 15937344 bytes in shared pool for flashback generation buffer
Starting background process RVWR
RVWR started with pid=17, OS id=5524
Fri Apr 12 19:12:45 2013
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Fri Apr 12 19:12:46 2013
ALTER DATABASE OPEN
Fri Apr 12 19:12:46 2013
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=18, OS id=11964
ARC1 started with pid=19, OS id=13472
ARC2 started with pid=20, OS id=17960
ARC3 started with pid=21, OS id=18548
ARC4 started with pid=22, OS id=15660
ARC5 started with pid=23, OS id=15548
ARC6 started with pid=24, OS id=14720
ARC7 started with pid=25, OS id=15780
ARC8 started with pid=26, OS id=17992
ARC9 started with pid=27, OS id=17988
ARCa started with pid=28, OS id=19436
ARCb started with pid=29, OS id=16104
ARCc started with pid=30, OS id=6656
ARCd started with pid=31, OS id=6900
ARCe started with pid=32, OS id=10568
ARCf started with pid=33, OS id=16992
ARCg started with pid=34, OS id=14372
ARCh started with pid=35, OS id=18084
ARCi started with pid=36, OS id=5788
ARCj started with pid=37, OS id=4940
ARCk started with pid=38, OS id=18816
ARCl started with pid=39, OS id=14588
ARCm started with pid=40, OS id=16820
ARCn started with pid=41, OS id=8068
ARCo started with pid=42, OS id=18736
ARCp started with pid=43, OS id=8316
ARCq started with pid=44, OS id=5952
ARCr started with pid=45, OS id=16304
ARCs started with pid=46, OS id=14884
Fri Apr 12 19:12:46 2013
ARC0: Archival started
ARCt started with pid=47, OS id=19408
Fri Apr 12 19:12:46 2013
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
Thread 1 opened at log sequence 117446
Current log# 10 seq# 117446 mem# 0: G:\ORADATA\REDO10A.LOG
Current log# 10 seq# 117446 mem# 1: H:\ORADATA\REDO10B.LOG
Fri Apr 12 19:12:46 2013
ARC0: Becoming the 'no FAL' ARCH
Fri Apr 12 19:12:46 2013
ARC0: Becoming the 'no SRL' ARCH
Fri Apr 12 19:12:46 2013
ARC8: Becoming the heartbeat ARCH
Fri Apr 12 19:12:47 2013
Successful open of redo thread 1
Fri Apr 12 19:12:47 2013
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Fri Apr 12 19:12:47 2013
SMON: enabling cache recovery
Fri Apr 12 19:12:48 2013
Successfully onlined Undo Tablespace 1.
Fri Apr 12 19:12:48 2013
SMON: enabling tx recovery
Fri Apr 12 19:12:48 2013
Database Characterset is WE8MSWIN1252
Opening with internal Resource Manager plan
where NUMA PG = 1, CPUs = 16
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=48, OS id=10048
Fri Apr 12 19:12:51 2013
Completed: ALTER DATABASE OPEN
Fri Apr 12 19:12:51 2013
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_mmon_14380.trc:
ORA-19815: WARNING: db_recovery_file_dest_size of 2147483648 bytes is 99.56% used, and has 9486336 remaining bytes available.
Fri Apr 12 19:12:51 2013
You have following choices to free up space from flash recovery area:
1. Consider changing RMAN RETENTION POLICY. If you are using Data Guard,
then consider changing RMAN ARCHIVELOG DELETION POLICY.
2. Back up files to tertiary device such as tape using RMAN
BACKUP RECOVERY AREA command.
3. Add disk space and increase db_recovery_file_dest_size parameter to
reflect the new space.
4. Delete unnecessary files using RMAN DELETE command. If an operating
system command was used to delete files, then use RMAN CROSSCHECK and
DELETE EXPIRED commands.
Dump file d:\oracle\product\10.2.0\admin\orcl\bdump\alert_orcl.log
Fri Apr 12 19:13:26 2013
ORACLE V10.2.0.4.0 - 64bit Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V6.0 Service Pack 1
CPU : 16 - type 8664, 16 Physical Cores
Process Affinity : 0x0000000000000000
Memory (Avail/Total): Ph:55999M/65533M, Ph+PgF:183151M/193356M
Fri Apr 12 19:13:26 2013
Starting ORACLE instance (restrict)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Autotune of undo retention is turned on.
IMODE=BR
ILAT =97
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.4.0.
System parameters with non-default values:
processes = 800
sessions = 885
sga_max_size = 10737418240
__shared_pool_size = 1325400064
__large_pool_size = 16777216
__java_pool_size = 16777216
__streams_pool_size = 0
sga_target = 8589934592
control_files = G:\ORADATA\CONTROL01.CTL, G:\ORADATA\CONTROL02.CTL, G:\ORADATA\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 7214202880
compatible = 10.2.0.3.0
log_archive_config = DG_CONFIG=(orcl,stdby)
log_archive_dest_1 = LOCATION=I:\archive_log VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=orcl
log_archive_dest_2 = SERVICE=stdby NOAFFIRM ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=stdby
log_archive_dest_state_1 = enable
log_archive_max_processes= 30
log_archive_format = ARC%D_%s_%R.%T
fal_client = orcl
fal_server = stdby
db_file_multiblock_read_count= 16
db_recovery_file_dest = D:\oracle\product\10.2.0\flash_recovery_area
db_recovery_file_dest_size= 2147483648
standby_file_management = AUTO
undo_management = AUTO
undo_tablespace = UNDOTBS1
undo_retention = 5400
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=orclXDB)
local_listener = (ADDRESS=(PROTOCOL=TCP)(HOST=192.168.12.86)(PORT=1521))
job_queue_processes = 10
audit_file_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\ADUMP
background_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\BDUMP
user_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\UDUMP
core_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\CDUMP
db_name = orcl
open_cursors = 500
pga_aggregate_target = 10737418240
PMON started with pid=2, OS id=18668
PSP0 started with pid=3, OS id=17668
MMAN started with pid=4, OS id=16896
DBW0 started with pid=5, OS id=18204
DBW1 started with pid=6, OS id=16976
LGWR started with pid=7, OS id=14552
CKPT started with pid=8, OS id=4480
SMON started with pid=9, OS id=10236
RECO started with pid=10, OS id=11832
CJQ0 started with pid=11, OS id=18844
MMON started with pid=12, OS id=15320
Fri Apr 12 19:13:27 2013
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=13, OS id=14944
Fri Apr 12 19:13:27 2013
starting up 1 shared server(s) ...
Fri Apr 12 19:13:27 2013
alter database orcl mount exclusive
Fri Apr 12 19:13:31 2013
Setting recovery target incarnation to 2
Fri Apr 12 19:13:31 2013
Successful mount of redo thread 1, with mount id 1340305111
Fri Apr 12 19:13:31 2013
Allocated 15937344 bytes in shared pool for flashback generation buffer
Starting background process RVWR
RVWR started with pid=17, OS id=12880
Fri Apr 12 19:13:31 2013
Database mounted in Exclusive Mode
Completed: alter database orcl mount exclusive
Fri Apr 12 19:13:31 2013
alter database open
Fri Apr 12 19:13:31 2013
Beginning crash recovery of 1 threads
parallel recovery started with 15 processes
Fri Apr 12 19:13:31 2013
Started redo scan
Fri Apr 12 19:13:31 2013
Completed redo scan
735 redo blocks read, 211 data blocks need recovery
Fri Apr 12 19:13:31 2013
Started redo application at
Thread 1: logseq 117446, block 97761
Fri Apr 12 19:13:31 2013
Recovery of Online Redo Log: Thread 1 Group 10 Seq 117446 Reading mem 0
Mem# 0: G:\ORADATA\REDO10A.LOG
Mem# 1: H:\ORADATA\REDO10B.LOG
Fri Apr 12 19:13:31 2013
Completed redo application
Fri Apr 12 19:13:32 2013
Completed crash recovery at
Thread 1: logseq 117446, block 98496, scn 7310601900
211 data blocks read, 211 data blocks written, 735 redo blocks read
Fri Apr 12 19:13:33 2013
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=33, OS id=18508
ARC1 started with pid=34, OS id=14692
ARC2 started with pid=35, OS id=17728
ARC3 started with pid=36, OS id=12476
ARC4 started with pid=37, OS id=19228
ARC5 started with pid=38, OS id=11552
ARC6 started with pid=39, OS id=7576
ARC7 started with pid=40, OS id=6244
ARC8 started with pid=41, OS id=18468
ARC9 started with pid=42, OS id=18492
ARCa started with pid=43, OS id=10352
ARCb started with pid=44, OS id=15516
ARCc started with pid=45, OS id=18216
ARCd started with pid=46, OS id=5660
ARCe started with pid=47, OS id=18756
ARCf started with pid=48, OS id=17828
ARCg started with pid=49, OS id=8696
ARCh started with pid=50, OS id=17736
ARCi started with pid=51, OS id=16736
ARCj started with pid=52, OS id=13208
ARCk started with pid=53, OS id=12012
ARCl started with pid=54, OS id=19180
ARCm started with pid=55, OS id=16632
ARCn started with pid=56, OS id=17588
ARCo started with pid=57, OS id=11948
ARCp started with pid=58, OS id=18416
ARCq started with pid=59, OS id=17888
ARCr started with pid=60, OS id=2144
ARCs started with pid=61, OS id=14392
Fri Apr 12 19:13:33 2013
ARC0: Archival started
ARCt started with pid=62, OS id=19264
Fri Apr 12 19:13:33 2013
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
Fri Apr 12 19:13:33 2013
Thread 1 advanced to log sequence 117447 (thread open)
Thread 1 opened at log sequence 117447
Current log# 8 seq# 117447 mem# 0: G:\ORADATA\REDO08A.LOG
Current log# 8 seq# 117447 mem# 1: H:\ORADATA\REDO08B.LOG
Successful open of redo thread 1
Fri Apr 12 19:13:33 2013
ARC3: Becoming the 'no FAL' ARCH
Fri Apr 12 19:13:33 2013
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Fri Apr 12 19:13:33 2013
ARC3: Becoming the 'no SRL' ARCH
Fri Apr 12 19:13:33 2013
ARCr: Becoming the heartbeat ARCH
Fri Apr 12 19:13:33 2013
SMON: enabling cache recovery
Fri Apr 12 19:13:33 2013
Successfully onlined Undo Tablespace 1.
Fri Apr 12 19:13:33 2013
SMON: enabling tx recovery
Fri Apr 12 19:13:33 2013
Database Characterset is WE8MSWIN1252
Opening with internal Resource Manager plan
where NUMA PG = 1, CPUs = 16
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=63, OS id=14896
Fri Apr 12 19:13:34 2013
Completed: alter database open
Fri Apr 12 19:13:34 2013
ALTER SYSTEM disable restricted session;
Fri Apr 12 19:13:35 2013
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_mmon_15320.trc:
ORA-19815: WARNING: db_recovery_file_dest_size of 2147483648 bytes is 99.56% used, and has 9486336 remaining bytes available.
Fri Apr 12 19:13:35 2013
You have following choices to free up space from flash recovery area:
1. Consider changing RMAN RETENTION POLICY. If you are using Data Guard,
then consider changing RMAN ARCHIVELOG DELETION POLICY.
2. Back up files to tertiary device such as tape using RMAN
BACKUP RECOVERY AREA command.
3. Add disk space and increase db_recovery_file_dest_size parameter to
reflect the new space.
4. Delete unnecessary files using RMAN DELETE command. If an operating
system command was used to delete files, then use RMAN CROSSCHECK and
DELETE EXPIRED commands.
Fri Apr 12 19:13:36 2013
Error 12514 received logging on to the standby
Fri Apr 12 19:13:36 2013
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arc0_18508.trc:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
FAL[server, ARC0]: Error 12514 creating remote archivelog file 'stdby'
FAL[server, ARC0]: FAL archive failed, see trace file.
Fri Apr 12 19:13:36 2013
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arc0_18508.trc:
ORA-16055: FAL request rejected
ARCH: FAL archive failed. Archiver continuing
Fri Apr 12 19:19:33 2013
Error 12514 received logging on to the standby
Fri Apr 12 19:19:33 2013
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arcr_2144.trc:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
PING[ARCr]: Heartbeat failed to connect to standby 'stdby'. Error is 12514.
Fri Apr 12 19:22:52 2013
PING[ARCr]: Heartbeat failed to connect to standby 'stdby'. Error is 12514.
Fri Apr 12 20:09:34 2013
Error 12514 received logging on to the standby
Fri Apr 12 20:09:34 2013
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arcr_2144.trc:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
PING[ARCr]: Heartbeat failed to connect to standby 'stdby'. Error is 12514.
Fri Apr 12 20:13:50 2013
Sat Apr 13 01:54:52 2013
Error 12514 received logging on to the standby
Sat Apr 13 01:54:52 2013
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arcr_2144.trc:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
PING[ARCr]: Heartbeat failed to connect to standby 'stdby'. Error is 12514.
Sat Apr 13 12:35:12 2013
Error 12514 received logging on to the standby
Sat Apr 13 12:35:12 2013
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arcr_2144.trc:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
PING[ARCr]: Heartbeat failed to connect to standby 'stdby'. Error is 12514.
Sat Apr 13 12:37:01 2013
ALTER SYSTEM SET log_archive_dest_state_2='DEFER' SCOPE=MEMORY;
Sat Apr 13 12:38:23 2013
Unable to allocate flashback log of 1946 blocks from
current recovery area of size 2147483648 bytes.
Current Flashback database retention is less than target
because of insufficient space in the flash recovery area.
Flashback will continue to use available space, but the
size of the flash recovery area must be increased to meet
the Flashback database retention target
Use ALTER SYSTEM SET db_recovery_file_dest_size command
to add space. DO NOT manually remove flashback log files
to create space.
Sat Apr 13 12:38:41 2013
ALTER SYSTEM SET db_recovery_file_dest_size='5G' SCOPE=MEMORY;
Sat Apr 13 12:38:41 2013
db_recovery_file_dest_size of 5120 MB is 39.82% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Sat Apr 13 15:42:21 2013
ORA-01555 caused by SQL statement below (SQL ID: 2zb70pwz9p06q, Query Duration=1365847941 sec, SCN: 0x0001.b3c0f735):
Sat Apr 13 15:42:21 2013
SELECT * FROM RELATIONAL("ORISSA_TRANSACTION"."SELLER_BIOMETRICS_TBL")
Sat Apr 13 15:48:37 2013
Thread 1 advanced to log sequence 117452 (LGWR switch)
Current log# 10 seq# 117452 mem# 0: G:\ORADATA\REDO10A.LOG
Current log# 10 seq# 117452 mem# 1: H:\ORADATA\REDO10B.LOG
Sat Apr 13 20:31:00 2013
The value (30) of MAXTRANS parameter ignored.
kupprdp: master process DM00 started with pid=31, OS id=16196
to execute - SYS.KUPM$MCP.MAIN('SYS_EXPORT_SCHEMA_30', 'ORISSA_TRANSACTION', 'KUPC$C_1_20130413203100', 'KUPC$S_1_20130413203100', 0);
kupprdp: worker process DW01 started with worker id=1, pid=66, OS id=16200
to execute - SYS.KUPW$WORKER.MAIN('SYS_EXPORT_SCHEMA_30', 'ORISSA_TRANSACTION');
Sun Apr 14 00:00:11 2013
Thread 1 advanced to log sequence 117453 (LGWR switch)
Current log# 8 seq# 117453 mem# 0: G:\ORADATA\REDO08A.LOG
Current log# 8 seq# 117453 mem# 1: H:\ORADATA\REDO08B.LOG
Sun Apr 14 00:00:52 2013
Thread 1 advanced to log sequence 117454 (LGWR switch)
Current log# 9 seq# 117454 mem# 0: G:\ORADATA\REDO09A.LOG
Current log# 9 seq# 117454 mem# 1: H:\ORADATA\REDO09B.LOGlike you show in the alert.log:
PROBLEM
Unable to allocate flashback log of 1946 blocks from
current recovery area of size 2147483648 bytes.
Current Flashback database retention is less than target
because of insufficient space in the flash recovery area.
Flashback will continue to use available space, but the
size of the flash recovery area must be increased to meet
the Flashback database retention target
Use ALTER SYSTEM SET db_recovery_file_dest_size command
to add space. DO NOT manually remove flashback log files
to create space.
SOLUTION
Fri Apr 12 19:12:51 2013
You have following choices to free up space from flash recovery area:
1. Consider changing RMAN RETENTION POLICY. If you are using Data Guard,
then consider changing RMAN ARCHIVELOG DELETION POLICY.
2. Back up files to tertiary device such as tape using RMAN
BACKUP RECOVERY AREA command.
3. Add disk space and increase db_recovery_file_dest_size parameter to
reflect the new space.
4. Delete unnecessary files using RMAN DELETE command. If an operating
system command was used to delete files, then use RMAN CROSSCHECK and
DELETE EXPIRED commands.
************************************************************************choose one and try again. Post if you have more issues. -
Hello guys!
After installation of SAP, I am with problems in hours of the start of sap. Below the Log:
b8aix10:qasadm 8> startsap
Checking DB6 db Database
ABAP Database is not available via R3trans
Checking DB6 db Database
Starting SAP-Collector Daemon
15:57:05 23.07.2008 LOG: Effective User Id is root
This is Saposcol Version COLL 20.90 640 - AIX v6.55 5L-64 bit 060323
Usage: saposcol -l: Start OS Collector
saposcol -k: Stop OS Collector
saposcol -d: OS Collector Dialog Mode
saposcol -s: OS Collector Status
The OS Collector (PID 25906) is already running .....
saposcol already running
Running /usr/sap/QAS/SYS/exe/run/startdb
R3trans connect failed
DB startup failed
In executing the command R3trans -x , appears the following error:
b8aix10:qasadm 9> R3trans -x
This is R3trans version 6.13 (release 640 - 25.07.06 - 17:34:00).
2EETW169 no connect possible: "DBMS = DB6 --- DB2DBDFT = 'QAS'"
R3trans finished (0012).
In the log of trans.log, the following message:
b8aix10:qasadm 11> cat trans.log
4 ETW000 R3trans version 6.13 (release 640 - 25.07.06 - 17:34:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 23.07.2008 - 15:58:04
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -x
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Jul 23 15:58:04 2008 84 0.000084
4 ETW000 [dev trc ,00000] db_con_init called 18 0.000102
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 54 0.000156
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/QAS/SYS/exe/run/dbdb6slib.o' ...
4 ETW000 63 0.000219
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/QAS/SYS/exe/run/dbdb6slib.o), hdl 0
4 ETW000 1433 0.001652
4 ETW000 [dev trc ,00000] Library '/usr/sap/QAS/SYS/exe/run/dbdb6slib.o' loaded
4 ETW000 30 0.001682
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/QAS/SYS/exe/run/dbdb6slib.o
4 ETW000 55 0.001737
4 ETW000 [dev trc ,00000] Version of '/usr/sap/QAS/SYS/exe/run/dbdb6slib.o' is "640.00", patchlevel (0.150)
4 ETW000 654 0.002391
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/QAS/SYS/exe/run/dbdb6slib.o
4 ETW000 32 0.002423
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/QAS/SYS/exe/run/dbdb6slib.o
4 ETW000 30 0.002453
4 ETW000 [dev trc ,00000] New connection 0 created 26 0.002479
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255,
occ = NO
4 ETW000 35 0.002514
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 53 0.002567
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 71 0.002638
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255,
occ = NO
4 ETW000 33 0.002671
4 ETW000 [dev trc ,00000] *** ERROR in DbSlConnectDB6[dbsldb6.c, 1129] (BEGIN)
4 ETW000 284 0.002955
4 ETW000 [dev trc ,00000] &+ DbSlConnectDB6: unable to open file: '/usr/sap/QAS/SYS/global/dscdb6.conf'
4 ETW000 52 0.003007
4 ETW000 [dev trc ,00000] &+
4 ETW000 32 0.003039
4 ETW000 [dev trc ,00000] &+
4 ETW000 32 0.003071
4 ETW000 [dev trc ,00000] &+
4 ETW000 31 0.003102
4 ETW000 [dev trc ,00000] *** ERROR in DbSlConnectDB6[dbsldb6.c, 1129] (END)
4 ETW000 48 0.003150
2EETW169 no connect possible: "DBMS = DB6 --- DBHi Ademir,
I'm wondering how you have loaded your database when there is no dscdb6.conf file. But it is easy to create a new one. Just execute the following:
> dscdb6up -create <connect user password> <sidadm password>
connect user is the user used for database connections. Normally it is sapxyz for SID XYZ. But you should check your environment. The name could be found in variable dbs_db6_schema. You should have supplied the password during installation. If you don't remember or you want to choose a different password, change it and then create or recreate dscdb6.conf with the above command.
Regards
Ralph -
Content Database Status Error in SharePoint 2010 Central Administration
Hi,
I am having a new problem with SharePoint 2010 on Windows Server 2008 R2. I have SQL Server 2008 R2 as SharePoint Database on Windows Server 2008 R2. I have total no. of
Seven Content Databases for one Web Application. I found
two of my Content Databases showing Error under the
Database Status column in Manage Content Database section in
Central Administration. Five Content Databases are showing
Started.
Would someone please guide how to resolve it and whats wrong is going on?
Thanks in advance.What is the output of:
$db = Get-SPContentDatabase <error'ed db name>
$db.Status
And can you set it to Started?
$db = Get-SPContentDatabase <error'ed db name>
$db.Status = "Online"
$db.Update()
Trevor Seward, MCC
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
ALTER DATABASE START LOGICAL STANDBY APPLY INITIAL
I am using oracle 9.2.0.8 db version. I am trying to configure logical standby database. When I issue "ALTER DATABASE START LOGICAL STANDBY APPLY INITIAL" i get following error.
ERROR at line 1:
ORA-01427: single-row subquery returns more than one row
ORA-06512: at line 1Hello,
Please, have a look on the Alert log fille, and post the error message if any.
May be you'll have more information about the offending subquery.
Best regards,
Jean-Valentin -
HI,
We have Installed OBI Apps V796. Below are the details.
OBI Apps V796
OBIEE 10.1.3.4.1
DAC 10.1.3.4.1
Informatica 8.6.0
We are getting the below error for the task "SDE_ORA_PartyPersonDimension_Customer" when we run the execution plan related to supply chain and order management analytics.
Severity Timestamp Node Thread Message Code Message
ERROR 6/23/2009 8:25:54 PM node01_obiee WRITER_1_*_1 WRT_8229 Database errors occurred:
Database driver error...
Function Name : Execute Multiple
SQL Stmt : INSERT INTO W_PARTY_PER_DS(PARTY_TYPE,FST_NAME,FULL_NAME,MID_NAME,LAST_NAME,DEPARTMENT_NAME,CONTACT_ID,CONTACT_TYPE,FAX_PH_NUM,PAGER_NUM,MOBILE_NUM,WORK_PHONE,SEX_MF_CD,ETHNICITY_CD,MARITAL_STAT_CD,BIRTH_DT,BIRTH_PLACE,DEATH_DT,ST_ADDRESS,CITY,STATE,ZIPCODE,COUNTRY,EMAIL_ADDR,JOB_TITLE,ANNL_INCOME,SUPPRESS_EMAIL_FLG,PROF_TITLE,STATUS_CD,ST_ADDRESS2,ST_ADDRESS3,ST_ADDRESS4,CREATED_BY_ID,CHANGED_BY_ID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,DELETE_FLG,DATASOURCE_NUM_ID,INTEGRATION_ID,TENANT_ID,X_CUSTOM,CUSTOMER_NUM) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?) ".
As a work around we tried by changing the Target load type option to normal(previously it is bulk) and still the task failed. Also tried by enabling the Constraint based loading option and still the tas got failed.
Any suggestions............
As
Regards
Venkatesh.Exactly same problem I'm also facing. The log is not showing any exact error information for the cause. And the surprise thing is when i'm running the debugger its inserting all the records. But when i run the task it is failing. Here is the log.
DIRECTOR> VAR_27028 Use override value [DataWarehouse] for session parameter:[$DBConnection_OLAP].
DIRECTOR> VAR_27028 Use override value [ORA_11_5_10] for session parameter:[$DBConnection_OLTP].
DIRECTOR> VAR_27028 Use override value [ORA_11_5_10.DATAWAREHOUSE.SDE_ORA11510_Adaptor.SDE_ORA_PartyPersonDimension_Customer_Full.log] for session parameter:[$PMSessionLogFile].
DIRECTOR> VAR_27028 Use override value [4] for mapping parameter:[$$DATASOURCE_NUM_ID].
DIRECTOR> VAR_27027 Use default value [] for mapping parameter:[mplt_BC_ORA_PartyPersonDimension.$$Hint1].
DIRECTOR> VAR_27027 Use default value [] for mapping parameter:[mplt_BC_ORA_PartyPersonDimension.$$Hint2].
DIRECTOR> VAR_27027 Use default value [] for mapping parameter:[mplt_BC_ORA_PartyPersonDimension.$$LAST_EXTRACT_DATE].
DIRECTOR> VAR_27028 Use override value [DEFAULT] for mapping parameter:[$$TENANT_ID].
DIRECTOR> TM_6014 Initializing session [SDE_ORA_PartyPersonDimension_Customer_Full] at [Mon Dec 28 19:10:26 2009].
DIRECTOR> TM_6683 Repository Name: [AA_REPOSITORY_SERVICE]
DIRECTOR> TM_6684 Server Name: [AA_INTEGRATION_SERVICE]
DIRECTOR> TM_6686 Folder: [SDE_ORA11510_Adaptor]
DIRECTOR> TM_6685 Workflow: [SDE_ORA_PartyPersonDimension_Customer_Full] Run Instance Name: [] Run Id: [1371]
DIRECTOR> TM_6101 Mapping name: SDE_ORA_PartyPersonDimension_Customer [version 1].
DIRECTOR> TM_6963 Pre 85 Timestamp Compatibility is Enabled
DIRECTOR> TM_6964 Date format for the Session is [MM/DD/YYYY HH24:MI:SS]
DIRECTOR> TM_6703 Session [SDE_ORA_PartyPersonDimension_Customer_Full] is run by 32-bit Integration Service [node01_obiee], version [8.6.1 HotFix6], build [0622].
MANAGER> PETL_24058 Running Partition Group [1].
MANAGER> PETL_24000 Parallel Pipeline Engine initializing.
MANAGER> PETL_24001 Parallel Pipeline Engine running.
MANAGER> PETL_24003 Initializing session run.
MAPPING> CMN_1569 Server Mode: [UNICODE]
MAPPING> CMN_1570 Server Code page: [UTF-8 encoding of Unicode]
MAPPING> TM_6151 The session sort order is [Binary].
MAPPING> TM_6185 Warning. Code page validation is disabled in this session.
MAPPING> TM_6156 Using low precision processing.
MAPPING> TM_6180 Deadlock retry logic will not be implemented.
MAPPING> TM_6307 DTM error log disabled.
MAPPING> TE_7022 TShmWriter: Initialized
MAPPING> DBG_21075 Connecting to database [BIDB], user [AABAW]
MAPPING> CMN_1716 Lookup [Lkp_W_ORA_PARTY_CONTACT_PS] uses database connection [Relational:DataWarehouse] in code page [MS Windows Latin 1 (ANSI), superset of Latin1]
MAPPING> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:26 2009]
MAPPING> TE_7004 Transformation Parse Warning [IIF(ISNULL(CONTACT_PARTY_ID||DATASOURCE_NUM_ID), '', 'Contact')]; transformation continues...
MAPPING> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:26 2009]
MAPPING> TE_7004 Transformation Parse Warning [<<PM Parse Warning>> [||]: operand converted to a string
... IIF(ISNULL(CONTACT_PARTY_ID||>>>>DATASOURCE_NUM_ID<<<<), '', 'Contact')]; transformation continues...
MAPPING> TM_6007 DTM initialized successfully for session [SDE_ORA_PartyPersonDimension_Customer_Full]
DIRECTOR> PETL_24033 All DTM Connection Info: [<NONE>].
MANAGER> PETL_24004 Starting pre-session tasks. : (Mon Dec 28 19:10:26 2009)
MANAGER> PETL_24027 Pre-session task completed successfully. : (Mon Dec 28 19:10:26 2009)
DIRECTOR> PETL_24006 Starting data movement.
MAPPING> TM_6660 Total Buffer Pool size is 12582912 bytes and Block size is 128000 bytes.
READER_1_1_1> DBG_21438 Reader: Source is [DEV01], user [apps]
READER_1_1_1> BLKR_16051 Source database connection [ORA_11_5_10] code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
READER_1_1_1> BLKR_16003 Initialization completed successfully.
WRITER_1_*_1> WRT_8146 Writer: Target is database [BIDB], user [AABAW], bulk mode [ON]
WRITER_1_*_1> WRT_8106 Warning! Bulk Mode session - recovery is not guaranteed.
WRITER_1_*_1> WRT_8221 Target database connection [DataWarehouse] code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
WRITER_1_*_1> WRT_8124 Target Table W_PARTY_PER_DS :SQL INSERT statement:
INSERT INTO W_PARTY_PER_DS(PARTY_TYPE,FST_NAME,FULL_NAME,MID_NAME,LAST_NAME,DEPARTMENT_NAME,CONTACT_ID,CONTACT_TYPE,FAX_PH_NUM,PAGER_NUM,MOBILE_NUM,WORK_PHONE,SEX_MF_CD,ETHNICITY_CD,MARITAL_STAT_CD,BIRTH_DT,BIRTH_PLACE,DEATH_DT,ST_ADDRESS,CITY,STATE,ZIPCODE,COUNTRY,EMAIL_ADDR,JOB_TITLE,ANNL_INCOME,CON_ACTIVE_FLG1,SUPPRESS_EMAIL_FLG,PROF_TITLE,STATUS_CD,ST_ADDRESS2,ST_ADDRESS3,ST_ADDRESS4,CREATED_BY_ID,CHANGED_BY_ID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,DELETE_FLG,DATASOURCE_NUM_ID,INTEGRATION_ID,TENANT_ID,X_CUSTOM,CUSTOMER_NUM) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
WRITER_1_*_1> WRT_8124 Target Table W_PARTY_PER_DS :SQL UPDATE statement:
UPDATE W_PARTY_PER_DS SET PARTY_TYPE = ?, FST_NAME = ?, FULL_NAME = ?, MID_NAME = ?, LAST_NAME = ?, DEPARTMENT_NAME = ?, CONTACT_ID = ?, CONTACT_TYPE = ?, FAX_PH_NUM = ?, PAGER_NUM = ?, MOBILE_NUM = ?, WORK_PHONE = ?, SEX_MF_CD = ?, ETHNICITY_CD = ?, MARITAL_STAT_CD = ?, BIRTH_DT = ?, BIRTH_PLACE = ?, DEATH_DT = ?, ST_ADDRESS = ?, CITY = ?, STATE = ?, ZIPCODE = ?, COUNTRY = ?, EMAIL_ADDR = ?, JOB_TITLE = ?, ANNL_INCOME = ?, CON_ACTIVE_FLG1 = ?, SUPPRESS_EMAIL_FLG = ?, PROF_TITLE = ?, STATUS_CD = ?, ST_ADDRESS2 = ?, ST_ADDRESS3 = ?, ST_ADDRESS4 = ?, CREATED_BY_ID = ?, CHANGED_BY_ID = ?, CREATED_ON_DT = ?, CHANGED_ON_DT = ?, AUX1_CHANGED_ON_DT = ?, AUX2_CHANGED_ON_DT = ?, AUX3_CHANGED_ON_DT = ?, AUX4_CHANGED_ON_DT = ?, SRC_EFF_TO_DT = ?, DELETE_FLG = ?, TENANT_ID = ?, X_CUSTOM = ?, CUSTOMER_NUM = ? WHERE SRC_EFF_FROM_DT = ? AND DATASOURCE_NUM_ID = ? AND INTEGRATION_ID = ?
WRITER_1_*_1> WRT_8124 Target Table W_PARTY_PER_DS :SQL DELETE statement:
DELETE FROM W_PARTY_PER_DS WHERE SRC_EFF_FROM_DT = ? AND DATASOURCE_NUM_ID = ? AND INTEGRATION_ID = ?
WRITER_1_*_1> WRT_8270 Target connection group #1 consists of target(s) [W_PARTY_PER_DS]
WRITER_1_*_1> WRT_8003 Writer initialization complete.
READER_1_1_1> BLKR_16007 Reader run started.
READER_1_1_1> RR_4029 SQ Instance [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY] User specified SQL Query [SELECT b1.party_id, b1.party_type, b1.person_name, b1.person_first_name, b1.person_middle_name, b1.person_last_name, b1.status, b1.phone_area_code, b1.phone_number, b1.address1, b1.address2, b1.address3, b1.address4, b1.postal_code, b1.city, b1.state, b1.country, b1.email_address, b1.date_of_birth, b1.place_of_birth, b1.date_of_death, b1.gender, b1.declared_ethnicity, b1.marital_status, b1.person_title, b1.personal_income, b1.do_not_mail_flag, b1.created_by, b1.creation_date, b1.last_updated_by, b1.last_update_date1 last_update_date, b1.last_update_date2 last_update_date, b1.last_update_date3 last_update_date, b1.party_number, b1.ACCNT_FLG FROM (SELECT per.party_id, pty.party_type, per.person_name, per.person_first_name, per.person_middle_name, per.person_last_name, pty.status, cnp.phone_area_code, cnp.phone_number, pty.address1, pty.address2, pty.address3, pty.address4, pty.postal_code, pty.city, pty.state, pty.country, pty.email_address, per.date_of_birth, per.place_of_birth, per.date_of_death, per.gender, per.declared_ethnicity, per.marital_status, per.person_title, per.personal_income, pty.do_not_mail_flag, per.created_by, per.creation_date, per.last_updated_by, per.last_update_date last_update_date1, pty.last_update_date last_update_date2, cnp.last_update_date last_update_date3, pty.party_number, (CASE WHEN acct.PARTY_ID IS NOT NULL THEN 'Y' END) ACCNT_FLG, MAX (per.person_profile_id) OVER (PARTITION BY per.party_id) max_person_profile_id, per.person_profile_id FROM hz_person_profiles per, hz_parties pty, hz_contact_points cnp, (SELECT a1.party_id, COUNT (1) cnt FROM (SELECT per.party_id FROM hz_person_profiles per UNION ALL SELECT pty.party_id FROM hz_parties pty UNION ALL SELECT --/*+ use_hash(pty cnp) index_ffs(pty, hz_parties_u1)*/ pty.party_id FROM hz_parties pty, hz_contact_points cnp WHERE pty.party_id = cnp.owner_table_id ) a1 GROUP BY party_id) TEMP, hz_cust_accounts acct WHERE per.party_id = TEMP.party_id AND per.party_id = pty.party_id AND pty.party_id = cnp.owner_table_id(+) AND cnp.owner_table_name(+) = 'HZ_PARTIES' AND cnp.contact_point_type(+) = 'PHONE' AND cnp.primary_flag(+) = 'Y' AND acct.PARTY_ID(+) = pty.PARTY_ID) b1 WHERE b1.person_profile_id = b1.max_person_profile_id HAVING COUNT (1) >= 0 GROUP BY b1.party_id, b1.party_type, b1.person_name, b1.person_first_name, b1.person_middle_name, b1.person_last_name, b1.status, b1.phone_area_code, b1.phone_number, b1.address1, b1.address2, b1.address3, b1.address4, b1.postal_code, b1.city, b1.state, b1.country, b1.email_address, b1.date_of_birth, b1.place_of_birth, b1.date_of_death, b1.gender, b1.declared_ethnicity, b1.marital_status, b1.person_title, b1.personal_income, b1.do_not_mail_flag, b1.created_by, b1.creation_date, b1.last_updated_by, b1.last_update_date1, b1.last_update_date2, b1.last_update_date3, b1.party_number, b1.ACCNT_FLG]
READER_1_1_1> RR_4049 SQL Query issued to database : (Mon Dec 28 19:10:26 2009)
WRITER_1_*_1> WRT_8005 Writer run started.
WRITER_1_*_1> WRT_8158
*****START LOAD SESSION*****
Load Start Time: Mon Dec 28 19:10:26 2009
Target tables:
W_PARTY_PER_DS
READER_1_1_1> RR_4050 First row returned from database to reader : (Mon Dec 28 19:10:29 2009)
LKPDP_1> DBG_21312 Lookup Transformation [Lkp_W_ORA_PARTY_CONTACT_PS]: Lookup override sql to create cache: SELECT W_ORA_PARTY_CONTACT_PS.DEPARTMENT AS DEPARTMENT, W_ORA_PARTY_CONTACT_PS.ORG_CONTACT_ID AS ORG_CONTACT_ID, W_ORA_PARTY_CONTACT_PS.CONTACT_NUMBER AS CONTACT_NUMBER, W_ORA_PARTY_CONTACT_PS.JOB_TITLE AS JOB_TITLE, W_ORA_PARTY_CONTACT_PS.DATASOURCE_NUM_ID AS DATASOURCE_NUM_ID, W_ORA_PARTY_CONTACT_PS.CONTACT_PARTY_ID AS CONTACT_PARTY_ID FROM W_ORA_PARTY_CONTACT_PS WHERE CUST_ACCOUNT_ROLE_ID=0 ORDER BY DATASOURCE_NUM_ID,CONTACT_PARTY_ID,DEPARTMENT,ORG_CONTACT_ID,CONTACT_NUMBER,JOB_TITLE
LKPDP_1> TE_7212 Increasing [Index Cache] size for transformation [Lkp_W_ORA_PARTY_CONTACT_PS] from [1048576] to [1392640].
LKPDP_1> TM_6660 Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
LKPDP_1:READER_1_1> DBG_21438 Reader: Source is [BIDB], user [AABAW]
LKPDP_1:READER_1_1> BLKR_16051 Source database connection [DataWarehouse] code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
LKPDP_1:READER_1_1> BLKR_16003 Initialization completed successfully.
LKPDP_1:READER_1_1> BLKR_16007 Reader run started.
LKPDP_1:READER_1_1> RR_4049 SQL Query issued to database : (Mon Dec 28 19:10:29 2009)
LKPDP_1:READER_1_1> RR_4050 First row returned from database to reader : (Mon Dec 28 19:10:30 2009)
LKPDP_1:TRANSF_1_1> DBG_21079 Creating Lookup Cache : (Mon Dec 28 19:10:30 2009)
LKPDP_1:READER_1_1> BLKR_16008 Reader run completed.
LKPDP_1:TRANSF_1_1> DBG_21682 Lookup table row count : 3247
LKPDP_1:TRANSF_1_1> DBG_21297 Lookup cache row count : 3238
LKPDP_1:TRANSF_1_1> DBG_21294 Lookup cache creation completed : (Mon Dec 28 19:10:30 2009)
LKPDP_1:TRANSF_1_1> CMN_1671 Created new cache files PMLKUP16713_5_0_1371W32.[dat/idx] in directory E:\Informatica\PowerCenter861\server\infa_shared\Cache for Lookup [Lkp_W_ORA_PARTY_CONTACT_PS].
LKPDP_1:TRANSF_1_1> DBG_21641 Lkp_W_ORA_PARTY_CONTACT_PS: Index cache size = [1392640], Data cache size = [2097152]
WRITER_1_*_1> WRT_8167 Start loading table [W_PARTY_PER_DS] at: Mon Dec 28 19:10:29 2009
WRITER_1_*_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
WRITER_1_*_1> WRT_8229 Database errors occurred:
Database driver error...
Function Name : Execute Multiple
SQL Stmt : INSERT INTO W_PARTY_PER_DS(PARTY_TYPE,FST_NAME,FULL_NAME,MID_NAME,LAST_NAME,DEPARTMENT_NAME,CONTACT_ID,CONTACT_TYPE,FAX_PH_NUM,PAGER_NUM,MOBILE_NUM,WORK_PHONE,SEX_MF_CD,ETHNICITY_CD,MARITAL_STAT_CD,BIRTH_DT,BIRTH_PLACE,DEATH_DT,ST_ADDRESS,CITY,STATE,ZIPCODE,COUNTRY,EMAIL_ADDR,JOB_TITLE,ANNL_INCOME,CON_ACTIVE_FLG1,SUPPRESS_EMAIL_FLG,PROF_TITLE,STATUS_CD,ST_ADDRESS2,ST_ADDRESS3,ST_ADDRESS4,CREATED_BY_ID,CHANGED_BY_ID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,DELETE_FLG,DATASOURCE_NUM_ID,INTEGRATION_ID,TENANT_ID,X_CUSTOM,CUSTOMER_NUM) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
WRITER_1_*_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
WRITER_1_*_1> WRT_8425 ERROR: Writer execution failed.
WRITER_1_*_1> WRT_8333 Rolling back all the targets due to fatal session error.
WRITER_1_*_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
WRITER_1_*_1> CMN_1022 Database driver error...
CMN_1022 []
WRITER_1_*_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
WRITER_1_*_1> WRT_8183 Rollback failed for the target [W_PARTY_PER_DS]
WRITER_1_*_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
WRITER_1_*_1> WRT_8081 Writer run terminated. [Error in loading data to target table [W_PARTY_PER_DS]]
WRITER_1_*_1> WRT_8168 End loading table [W_PARTY_PER_DS] at: Mon Dec 28 19:10:30 2009
WRITER_1_*_1> WRT_8035 Load complete time: Mon Dec 28 19:10:30 2009
LOAD SUMMARY
============
WRT_8036 Target: W_PARTY_PER_DS (Instance Name: [W_PARTY_PER_DS])
WRT_8038 Inserted rows - Requested: 1568 Applied: 1552 Rejected: 0 Affected: 1552
WRITER_1__1> WRT_8043 ****END LOAD SESSION*****
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [W_PARTY_PER_DS], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_SA_ORA_PartyPersonDimension.EXP_PARTY_PERSON], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_SA_ORA_PartyPersonDimension.EXP_PARTY_PERSON], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_BC_ORA_PartyPersonDimension.EXP_PER_PARTY], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_BC_ORA_PartyPersonDimension.EXP_PER_PARTY], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY], and the session is terminating.
TRANSF_1_1_1> DBG_21511 TE: Fatal Transformation Error.
MANAGER> PETL_24031
***** RUN INFO FOR TGT LOAD ORDER GROUP [1], CONCURRENT SET [1] *****
Thread [READER_1_1_1] created for [the read stage] of partition point [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY] has completed.
Total Run Time = [3.765415] secs
Total Idle Time = [0.781122] secs
Busy Percentage = [79.255350]
Thread [TRANSF_1_1_1] created for [the transformation stage] of partition point [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY] has completed.
Total Run Time = [1.001440] secs
Total Idle Time = [0.690994] secs
Busy Percentage = [30.999937]
Transformation-specific statistics for this thread were not accurate enough to report.
Thread [WRITER_1_*_1] created for [the write stage] of partition point [W_PARTY_PER_DS] has completed. The total run time was insufficient for any meaningful statistics.
MAPPING> CMN_1793 The index cache size that would hold [3238] rows in the lookup table for [Lkp_W_ORA_PARTY_CONTACT_PS], in memory, is [696320] bytes
MAPPING> CMN_1792 The data cache size that would hold [3238] rows in the lookup table for [Lkp_W_ORA_PARTY_CONTACT_PS], in memory, is [1908736] bytes
MANAGER> PETL_24005 Starting post-session tasks. : (Mon Dec 28 19:10:30 2009)
MANAGER> PETL_24029 Post-session task completed successfully. : (Mon Dec 28 19:10:30 2009)
MAPPING> TE_7216 Deleting cache files [PMLKUP16713_5_0_1371W32] for transformation [Lkp_W_ORA_PARTY_CONTACT_PS].
MAPPING> TM_6018 The session completed with [0] row transformation errors.
MANAGER> PETL_24002 Parallel Pipeline Engine finished.
DIRECTOR> PETL_24013 Session run completed with failure.
DIRECTOR> TM_6022
SESSION LOAD SUMMARY
================================================
DIRECTOR> TM_6252 Source Load Summary.
DIRECTOR> CMN_1740 Table: [SQ_HZ_PERSON_PARTY] (Instance Name: [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY])
Output Rows [1788], Affected Rows [1788], Applied Rows [1788], Rejected Rows [0]
DIRECTOR> TM_6253 Target Load Summary.
DIRECTOR> CMN_1740 Table: [W_PARTY_PER_DS] (Instance Name: [W_PARTY_PER_DS])
Output Rows [1552], Affected Rows [1552], Applied Rows [1552], Rejected Rows [0]
DIRECTOR> TM_6023
===================================================
DIRECTOR> TM_6020 Session [SDE_ORA_PartyPersonDimension_Customer_Full] completed at [Mon Dec 28 19:10:31 2009]. -
Hi All,
I have one client who is using VPN to login into the system.I have to devlope some crystal report .
I have installed Business Object Edge series, Crystal Report 2008, Integration kit. and connected successfully.
when i try to run the report it shows the error
"Database Connected Error : Bapi Error #:0"
"Error Occured When Starting Parser : Timeout during allocate / CPIC-CALL: 'thSAPCMRCV".
Regards,
Komik ShahHi
The usual cause for this error is that the MDX parser in SAP is failing.
If you run MDXTest do you get similar problems? Generally this can be fixed by having your BASIS people recreate the MDX parser.
Hope this helps!!!
Regards
Sourashree -
Database connecting error after kernel upgrade
Hi Gurus
I am tring to upgrade my system kernel from 144 to 179, the system based on AIX 6.1 and DB2 B9.5.2,
After upgrading kernel SAP is not starting and I found database connection error because which Database is not activated. The startdb command completed successfully. I found I/O error while trying to make db connection.
I am also tring make SAP up by using old kernel (backup) but getting same error for backup kernel also. Now my system is totaly down.
So please help me out if you have any idea for this error in db2 database. The start db logs are as given below.
Wed Jan 21 08:56:07 GMT+05:30 2009
LOGFILE FOR STARTING DB6 (DB2 UDB)
Wed Jan 21 08:56:07 GMT+05:30 2009
checking required environment variables
DB2INSTANCE is >db2d11<
INSTHOME is >/db2/db2d11<
DB2DBDFT is >D11<
Wed Jan 21 08:56:07 GMT+05:30 2009
starting database manager
01/21/2009 08:56:07 0 0 SQL1026N The database manager is already active.
SQL1026N The database manager is already active.
Database Manager started
SQL1036C An I/O error occurred while accessing the database. SQLSTATE=58030
Activate database failed
Wed Jan 21 08:56:08 GMT+05:30 2009
R3trans connect to the database
R3trans check finished with return code: 12
R3trans connect failed
Notify your SAP/database administrator
Wed Jan 21 08:56:08 GMT+05:30 2009
/usr/sap/D11/SYS/exe/run/startdb: Terminating with error code 2
Please help me out.
Regards,
Jayesh.Hi Jayesh,
from your description I would guess that the IO error is not related to the kernel change at all.
Please have a look at db2diag.log for the real cause of the problem.
You should be able to reproduce the error with
db2 activate database <dbname>
Regards
Frank -
CR: Error in File ~tmp2be86bbf9f5e260.rpt: Database Connector Error
dear all, this has finally got the better of me.
i have been successfully scheduling a set of reports each month, until now. they all come back with the following error, each with a different ~tmp.rpt file
Error in File ~tmp2be86bbf9f5e260.rpt: Database Connector Error
each report communicates with an SAP ECC system. the user is fine, i have even tried my username to connect to sap, and same error occurs.
no runtime errors in sap.
the actual reports can be opened with crystal reports, and refreshed to show data without any problem.
could this be an integration issue. i checked by removing the sap role, and adding it back without any issues.
i have also cloned the CrystalReportsJobServer and tried to schedule with this one, same thing happens
here are the instance details
Title: Inv Count Cars
Document Type: Crystal Report
Status Failed
External Destination: None
Owner: ABC~400/GSMITH
Server Used: ABSAP02.CrystalReportsJobServer
PID: 11240
Folder Path: Reports/
Remote Instance: No
Creation Time: 1/09/2011 14:59
Expiry: 1/09/2021 14:59
Start Time: 1/09/2011 14:59
End Time: 1/09/2011 14:59
Printer: None
Formats: Crystal Reports
Parameters: null; chrysler
Error Message: Error in File ~tmp2be86bbf9f5e260.rpt: Database Connector Error
could this be an integration ?
i would very much appreciate anyones help
thanks
g
Edited by: Glen Spalding on Sep 1, 2011 7:27 AMall servers up and running without any problems
ODBC database connection works fine
here a list i have made, so i can remember what i have done
the issue is on the production box, and the dev box works fine.
1. checked sap user, ok
2. checked individual reports, ok
3. checked dev environment, ok
4. checked production IFRS & OFRS, ok
5. checked production report on dev environment, ok
6. checked working dev report on production environment, failed
7. u201Crepairu201D of installation kit
8. CRYSTALREPORTJBBSERVER failing
9. cloned server, server failed
10. tried rogue sap user/password on dev environment, returned different error
11. bounced production, same problem, failed
12. checked OBDC connection
13. checked new SIA with new Job Server, still same thing, failed
14. No Windows Events
15. SAP note raised (0000724225 2011)
16. BOBI Server Trace files nothing obvious
17. tried with report sample to different backend, and CrystalReportsJobServer, ok
18. brand new crystal reports with different user, failed
19. noticed in trace file error 707 with JobScheduleChild process -
Hello:
I have recently started getting this error when trying to Hot Sync my device:
An error occurred while attempting to initialize the Borland Database Engine (error $2108)
The device is a Symbol scanner with Palm OS v4.17. It is connected to my computer with a serial cable. The only relatively recent changes I can think of to my system are:
1. Installed a Borland software product (StarTeam) that is newer than my Palm software.
2. Installed MS Office 2007.
Please let me know if you need any more information.
Thanks!
Post relates to: NoneI would have to recommend you contact your vender where you got the scanner from. If a device got this error that we support we would hard reset the device and rename the backup folder under the username for hotsync. With this device I wouldn't know where to start.
-
Database Connector Error when publishing
We are publishing a report to multiple recipients, when publishing to any single recipient it works but as soon as a second recipient is added it gives a "Database Connector Error" The installation is XI3.1 on AIX. The publication worked for a list of 2000 recipients last week, now it only works for a single ricipient at a time. I realise something must have changed but basis say nothing has changed and on the reports a small format change was made. Where can I start looking.
Edited by: Johann Cornelius on Sep 18, 2009 1:06 PMHi,
there are sevaral SAP Notes for your problem. Can you specify the databaseof the source?
i.e. MS SQL Server -> Note 1212769
dbase -> Note 1209347
regards
-Phil -
Testdrive N4S with Fedora 8 - Database Start failure
Hello,
I installed the System N4S successfully on a Fedora 8, kernel 2.6.23, but Database start ends up with failure.
Message from startdb.log:
Starting XServer
12916 XSERVER Found other running x_server with version 'X64/LINUX 7.6.00 Build 018-123-119-055'
12902 XSERVER started, 'already...'
So 30. Dez 19:01:41 CET 2007
Starting database
Starting Database Instance...
Error! XUser not found!
Opening Database...
Error! XUser not found!
DB-log Files indicate some missing crypt-libs:
trc file: "/sapdb/data/wrk/niserver_machine64.trace", trc level: 1, release: "700"
Sun Dec 30 18:13:50 2007
ERROR => DlLoadLib: dlopen()= /sapdb/programs/lib/libsapcrypto.so: cannot open shared object file: No such file or directory -> DLENOACCESS (0,Success) [dlux.c 314]
ERROR => CDKLoadSAPCryptModule: Loading of /sapdb/programs/lib/libsapcrypto.so failed! [cdkapi.c 204]
This library was obviously not included in the testdrive.
However this seems to result only in a warning and to be not the real problem.
I saw somewhere already a comment advising an upgrade of the database-version because of some library conflicts with an other problem:
https://forums.sdn.sap.com/click.jspa?searchID=7692305&messageID=3719866
Can somebody advise on that topic?
Thank you and kind regards,
AxelDear Axel,
having no XUSERs (needed for database connection) makes an automated database start impossible. Can you check, if you have a XUSER file in the home directory of n4sadm?
$> su - n4sadm
#> cd
#> ls -la .XUSER.62
-rw------- 1 n4sadm sapsys 1724 Apr 20 2007 .XUSER.62
If it is there, but you can't connect to the database, it should make a copy of the old one with:
mv -a .XUSER.62 .XUSER.62.org
and create a new one, which you should do if the file isn't there as well:
/sapdb/programs/bin/xuser -U DEFAULT -u sapn4s,sapn4sadm -d N4S -n n4shost -S SAPR3 -t 0 -I 0 set
/sapdb/programs/bin/xuser -U c -u control,sapn4sadm -d N4S -n n4shost -S SAPR3 -t 0 -I 0 set
/sapdb/programs/bin/xuser -U c_J2EE -u control,sapn4sadm -d N4S -n n4shost -S SAPR3 -t 0 -I 0 set
/sapdb/programs/bin/xuser -U w -u superdba,sapn4sadm -d N4S -n n4shost -S SAPR3 -t 0 -I 0 set
After executing the 4 commands, a new .XUSER.62 file will be there, which allows you to start the database.
Thanks,
Hannes
Maybe you are looking for
-
Itunes 10.4 won't install on 10.6.8 via software update
everything is in the titel, won't update via software update and regular download on the apple website
-
PSE 7 with windows 7 cannot get edited pics just not back in Org ?
Since installinng windows 7 I have not been able to edit pictures and have them back in Organizer just have a blank icon this happend after installing windows photo gallery. went to default tried to put defalt as Adobe photoshop elements organizer bu
-
i'm looking for simple example of alv with class (this is OO) and with events thanks
-
Hello, In our XI production system, some times there many messages in sxmb_moni fails with the error "HTTP_RESP_STATUS_CODE_NOT_OK", when we restart the message it getting processed . I am not sure what is the cause for this. however there is job RSX
-
Hi, We're using NW 6sp5, ZFD6.5sp2 & nwclient 4.91sp3. We have a Windows Terminal 2003 server setup, Novell Client, Zen Agent and have created a User Policy to run DLU for our users. DLU is being ignored in this policy for the server but all other it