Database starting failure
Hi........I've a serious problem with the my database -->one day I was starting database (oracle I on win98) then the power goes down then when I tried to start it there after I received (ORA-322 cannot open database) error message then I read many forums here and on the web to recover the database but I was stuck with changing the current log (cause it may be corrupted) to a new one (cause I can't do so when the database isn't open) I need only to restore the database scheme and the procedure there and I've no idea about recovery management in oracle so please help....
Observe the control_files parameter in init.ora
example
control_files=('c:\oracle\oradata\orcl\control01.ctl',
'c:\oracle\oradata\orcl\control02.ctl',
'c:\oracle\oradata\orcl\control03.ctl')
If you have 2 or more files then you have multiplexed them.
For muliplexing....
After your database is up and running normally. Shutdown the database. copy one controlfile to another location. Say you copied control01.ctl to d:\oracle\oradata\orcl. after copy rename to control02.ctl. Include the complete path of newly created controlfile in control_files parameter of init.ora. Now oracle will write to both control01.ctl and control02.ctl files. Thus you have multiplexed them.
-aijaz
Similar Messages
-
Testdrive N4S with Fedora 8 - Database Start failure
Hello,
I installed the System N4S successfully on a Fedora 8, kernel 2.6.23, but Database start ends up with failure.
Message from startdb.log:
Starting XServer
12916 XSERVER Found other running x_server with version 'X64/LINUX 7.6.00 Build 018-123-119-055'
12902 XSERVER started, 'already...'
So 30. Dez 19:01:41 CET 2007
Starting database
Starting Database Instance...
Error! XUser not found!
Opening Database...
Error! XUser not found!
DB-log Files indicate some missing crypt-libs:
trc file: "/sapdb/data/wrk/niserver_machine64.trace", trc level: 1, release: "700"
Sun Dec 30 18:13:50 2007
ERROR => DlLoadLib: dlopen()= /sapdb/programs/lib/libsapcrypto.so: cannot open shared object file: No such file or directory -> DLENOACCESS (0,Success) [dlux.c 314]
ERROR => CDKLoadSAPCryptModule: Loading of /sapdb/programs/lib/libsapcrypto.so failed! [cdkapi.c 204]
This library was obviously not included in the testdrive.
However this seems to result only in a warning and to be not the real problem.
I saw somewhere already a comment advising an upgrade of the database-version because of some library conflicts with an other problem:
https://forums.sdn.sap.com/click.jspa?searchID=7692305&messageID=3719866
Can somebody advise on that topic?
Thank you and kind regards,
AxelDear Axel,
having no XUSERs (needed for database connection) makes an automated database start impossible. Can you check, if you have a XUSER file in the home directory of n4sadm?
$> su - n4sadm
#> cd
#> ls -la .XUSER.62
-rw------- 1 n4sadm sapsys 1724 Apr 20 2007 .XUSER.62
If it is there, but you can't connect to the database, it should make a copy of the old one with:
mv -a .XUSER.62 .XUSER.62.org
and create a new one, which you should do if the file isn't there as well:
/sapdb/programs/bin/xuser -U DEFAULT -u sapn4s,sapn4sadm -d N4S -n n4shost -S SAPR3 -t 0 -I 0 set
/sapdb/programs/bin/xuser -U c -u control,sapn4sadm -d N4S -n n4shost -S SAPR3 -t 0 -I 0 set
/sapdb/programs/bin/xuser -U c_J2EE -u control,sapn4sadm -d N4S -n n4shost -S SAPR3 -t 0 -I 0 set
/sapdb/programs/bin/xuser -U w -u superdba,sapn4sadm -d N4S -n n4shost -S SAPR3 -t 0 -I 0 set
After executing the 4 commands, a new .XUSER.62 file will be there, which allows you to start the database.
Thanks,
Hannes -
After upgrading to Yosemite (I don't have iPhoto anymore, only PHOTOS) my pictures will not import from my iPad or iPhone 5s or any picture from web, it shows "Database Error: failured to persist version". Any help will be greatly appreciated.
Sorry,
Yes, the error message is exactly like that ("Database error: failured to persist version")
No photos will import at all. I use USB to import from iPhone 5s or iPad 2.
About the difference? iPhoto and Photos . Are there two softwares?
I also will like to merge and/or synchronize all my photos I had saved to iCloud backups, Macbook Pro, iPhone 5s and iPad hard drives using iPhoto. It's call iPhoto library. At one point I turned off streaming.
Thanks again Larry HN. -
Database Started In Restricted Mode...
Dear Exports,
We are using Oracle 10gR2 on Windows server 2008. My database size is approximately 2tb. Now we are going to setup Dataguard for our primary. We started the database with the changer parameters for dataguard and create spfile from pfile. And started the database with Spfile. But after some time i noticed that the database started automatically in Restricted mode. As in our database Previously dataguard was configured, due to the some problem that setup is not working and the logs are not applied in Standby server. I thought may be for this reason database going to restricted mode automatically so i set the log_archive_dest_state_2='DEFFER' and Now I scanned the whore alert.log file and found the same situation of restricted is happening from Jan 2010. Please Suggest some solution how i can over come the problem.
The alertlog when i started the database recently...
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Fri Apr 12 19:12:39 2013
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Autotune of undo retention is turned on.
IMODE=BR
ILAT =97
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.4.0.
System parameters with non-default values:
processes = 800
sessions = 885
sga_max_size = 10737418240
__shared_pool_size = 1325400064
__large_pool_size = 16777216
__java_pool_size = 16777216
__streams_pool_size = 0
sga_target = 8589934592
control_files = G:\ORADATA\CONTROL01.CTL, G:\ORADATA\CONTROL02.CTL, G:\ORADATA\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 7214202880
compatible = 10.2.0.3.0
log_archive_config = DG_CONFIG=(orcl,stdby)
log_archive_dest_1 = LOCATION=I:\archive_log VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=orcl
log_archive_dest_2 = SERVICE=stdby NOAFFIRM ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=stdby
log_archive_dest_state_1 = enable
log_archive_max_processes= 30
log_archive_format = ARC%D_%s_%R.%T
fal_client = orcl
fal_server = stdby
db_file_multiblock_read_count= 16
db_recovery_file_dest = D:\oracle\product\10.2.0\flash_recovery_area
db_recovery_file_dest_size= 2147483648
standby_file_management = AUTO
undo_management = AUTO
undo_tablespace = UNDOTBS1
undo_retention = 5400
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=orclXDB)
local_listener = (ADDRESS=(PROTOCOL=TCP)(HOST=192.168.12.86)(PORT=1521))
job_queue_processes = 10
audit_file_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\ADUMP
background_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\BDUMP
user_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\UDUMP
core_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\CDUMP
db_name = orcl
open_cursors = 500
pga_aggregate_target = 10737418240
PMON started with pid=2, OS id=14328
PSP0 started with pid=3, OS id=15420
MMAN started with pid=4, OS id=9092
DBW0 started with pid=5, OS id=12360
DBW1 started with pid=6, OS id=18112
LGWR started with pid=7, OS id=18360
CKPT started with pid=8, OS id=18448
SMON started with pid=9, OS id=17160
RECO started with pid=10, OS id=18512
CJQ0 started with pid=11, OS id=19324
MMON started with pid=12, OS id=14380
Fri Apr 12 19:12:40 2013
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=13, OS id=2996
Fri Apr 12 19:12:40 2013
starting up 1 shared server(s) ...
Fri Apr 12 19:12:41 2013
ALTER DATABASE MOUNT
Fri Apr 12 19:12:45 2013
Setting recovery target incarnation to 2
Fri Apr 12 19:12:45 2013
Successful mount of redo thread 1, with mount id 1340307369
Fri Apr 12 19:12:45 2013
Allocated 15937344 bytes in shared pool for flashback generation buffer
Starting background process RVWR
RVWR started with pid=17, OS id=5524
Fri Apr 12 19:12:45 2013
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Fri Apr 12 19:12:46 2013
ALTER DATABASE OPEN
Fri Apr 12 19:12:46 2013
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=18, OS id=11964
ARC1 started with pid=19, OS id=13472
ARC2 started with pid=20, OS id=17960
ARC3 started with pid=21, OS id=18548
ARC4 started with pid=22, OS id=15660
ARC5 started with pid=23, OS id=15548
ARC6 started with pid=24, OS id=14720
ARC7 started with pid=25, OS id=15780
ARC8 started with pid=26, OS id=17992
ARC9 started with pid=27, OS id=17988
ARCa started with pid=28, OS id=19436
ARCb started with pid=29, OS id=16104
ARCc started with pid=30, OS id=6656
ARCd started with pid=31, OS id=6900
ARCe started with pid=32, OS id=10568
ARCf started with pid=33, OS id=16992
ARCg started with pid=34, OS id=14372
ARCh started with pid=35, OS id=18084
ARCi started with pid=36, OS id=5788
ARCj started with pid=37, OS id=4940
ARCk started with pid=38, OS id=18816
ARCl started with pid=39, OS id=14588
ARCm started with pid=40, OS id=16820
ARCn started with pid=41, OS id=8068
ARCo started with pid=42, OS id=18736
ARCp started with pid=43, OS id=8316
ARCq started with pid=44, OS id=5952
ARCr started with pid=45, OS id=16304
ARCs started with pid=46, OS id=14884
Fri Apr 12 19:12:46 2013
ARC0: Archival started
ARCt started with pid=47, OS id=19408
Fri Apr 12 19:12:46 2013
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
Thread 1 opened at log sequence 117446
Current log# 10 seq# 117446 mem# 0: G:\ORADATA\REDO10A.LOG
Current log# 10 seq# 117446 mem# 1: H:\ORADATA\REDO10B.LOG
Fri Apr 12 19:12:46 2013
ARC0: Becoming the 'no FAL' ARCH
Fri Apr 12 19:12:46 2013
ARC0: Becoming the 'no SRL' ARCH
Fri Apr 12 19:12:46 2013
ARC8: Becoming the heartbeat ARCH
Fri Apr 12 19:12:47 2013
Successful open of redo thread 1
Fri Apr 12 19:12:47 2013
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Fri Apr 12 19:12:47 2013
SMON: enabling cache recovery
Fri Apr 12 19:12:48 2013
Successfully onlined Undo Tablespace 1.
Fri Apr 12 19:12:48 2013
SMON: enabling tx recovery
Fri Apr 12 19:12:48 2013
Database Characterset is WE8MSWIN1252
Opening with internal Resource Manager plan
where NUMA PG = 1, CPUs = 16
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=48, OS id=10048
Fri Apr 12 19:12:51 2013
Completed: ALTER DATABASE OPEN
Fri Apr 12 19:12:51 2013
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_mmon_14380.trc:
ORA-19815: WARNING: db_recovery_file_dest_size of 2147483648 bytes is 99.56% used, and has 9486336 remaining bytes available.
Fri Apr 12 19:12:51 2013
You have following choices to free up space from flash recovery area:
1. Consider changing RMAN RETENTION POLICY. If you are using Data Guard,
then consider changing RMAN ARCHIVELOG DELETION POLICY.
2. Back up files to tertiary device such as tape using RMAN
BACKUP RECOVERY AREA command.
3. Add disk space and increase db_recovery_file_dest_size parameter to
reflect the new space.
4. Delete unnecessary files using RMAN DELETE command. If an operating
system command was used to delete files, then use RMAN CROSSCHECK and
DELETE EXPIRED commands.
Dump file d:\oracle\product\10.2.0\admin\orcl\bdump\alert_orcl.log
Fri Apr 12 19:13:26 2013
ORACLE V10.2.0.4.0 - 64bit Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows NT Version V6.0 Service Pack 1
CPU : 16 - type 8664, 16 Physical Cores
Process Affinity : 0x0000000000000000
Memory (Avail/Total): Ph:55999M/65533M, Ph+PgF:183151M/193356M
Fri Apr 12 19:13:26 2013
Starting ORACLE instance (restrict)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Autotune of undo retention is turned on.
IMODE=BR
ILAT =97
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.4.0.
System parameters with non-default values:
processes = 800
sessions = 885
sga_max_size = 10737418240
__shared_pool_size = 1325400064
__large_pool_size = 16777216
__java_pool_size = 16777216
__streams_pool_size = 0
sga_target = 8589934592
control_files = G:\ORADATA\CONTROL01.CTL, G:\ORADATA\CONTROL02.CTL, G:\ORADATA\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 7214202880
compatible = 10.2.0.3.0
log_archive_config = DG_CONFIG=(orcl,stdby)
log_archive_dest_1 = LOCATION=I:\archive_log VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=orcl
log_archive_dest_2 = SERVICE=stdby NOAFFIRM ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=stdby
log_archive_dest_state_1 = enable
log_archive_max_processes= 30
log_archive_format = ARC%D_%s_%R.%T
fal_client = orcl
fal_server = stdby
db_file_multiblock_read_count= 16
db_recovery_file_dest = D:\oracle\product\10.2.0\flash_recovery_area
db_recovery_file_dest_size= 2147483648
standby_file_management = AUTO
undo_management = AUTO
undo_tablespace = UNDOTBS1
undo_retention = 5400
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=orclXDB)
local_listener = (ADDRESS=(PROTOCOL=TCP)(HOST=192.168.12.86)(PORT=1521))
job_queue_processes = 10
audit_file_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\ADUMP
background_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\BDUMP
user_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\UDUMP
core_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\ORCL\CDUMP
db_name = orcl
open_cursors = 500
pga_aggregate_target = 10737418240
PMON started with pid=2, OS id=18668
PSP0 started with pid=3, OS id=17668
MMAN started with pid=4, OS id=16896
DBW0 started with pid=5, OS id=18204
DBW1 started with pid=6, OS id=16976
LGWR started with pid=7, OS id=14552
CKPT started with pid=8, OS id=4480
SMON started with pid=9, OS id=10236
RECO started with pid=10, OS id=11832
CJQ0 started with pid=11, OS id=18844
MMON started with pid=12, OS id=15320
Fri Apr 12 19:13:27 2013
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=13, OS id=14944
Fri Apr 12 19:13:27 2013
starting up 1 shared server(s) ...
Fri Apr 12 19:13:27 2013
alter database orcl mount exclusive
Fri Apr 12 19:13:31 2013
Setting recovery target incarnation to 2
Fri Apr 12 19:13:31 2013
Successful mount of redo thread 1, with mount id 1340305111
Fri Apr 12 19:13:31 2013
Allocated 15937344 bytes in shared pool for flashback generation buffer
Starting background process RVWR
RVWR started with pid=17, OS id=12880
Fri Apr 12 19:13:31 2013
Database mounted in Exclusive Mode
Completed: alter database orcl mount exclusive
Fri Apr 12 19:13:31 2013
alter database open
Fri Apr 12 19:13:31 2013
Beginning crash recovery of 1 threads
parallel recovery started with 15 processes
Fri Apr 12 19:13:31 2013
Started redo scan
Fri Apr 12 19:13:31 2013
Completed redo scan
735 redo blocks read, 211 data blocks need recovery
Fri Apr 12 19:13:31 2013
Started redo application at
Thread 1: logseq 117446, block 97761
Fri Apr 12 19:13:31 2013
Recovery of Online Redo Log: Thread 1 Group 10 Seq 117446 Reading mem 0
Mem# 0: G:\ORADATA\REDO10A.LOG
Mem# 1: H:\ORADATA\REDO10B.LOG
Fri Apr 12 19:13:31 2013
Completed redo application
Fri Apr 12 19:13:32 2013
Completed crash recovery at
Thread 1: logseq 117446, block 98496, scn 7310601900
211 data blocks read, 211 data blocks written, 735 redo blocks read
Fri Apr 12 19:13:33 2013
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=33, OS id=18508
ARC1 started with pid=34, OS id=14692
ARC2 started with pid=35, OS id=17728
ARC3 started with pid=36, OS id=12476
ARC4 started with pid=37, OS id=19228
ARC5 started with pid=38, OS id=11552
ARC6 started with pid=39, OS id=7576
ARC7 started with pid=40, OS id=6244
ARC8 started with pid=41, OS id=18468
ARC9 started with pid=42, OS id=18492
ARCa started with pid=43, OS id=10352
ARCb started with pid=44, OS id=15516
ARCc started with pid=45, OS id=18216
ARCd started with pid=46, OS id=5660
ARCe started with pid=47, OS id=18756
ARCf started with pid=48, OS id=17828
ARCg started with pid=49, OS id=8696
ARCh started with pid=50, OS id=17736
ARCi started with pid=51, OS id=16736
ARCj started with pid=52, OS id=13208
ARCk started with pid=53, OS id=12012
ARCl started with pid=54, OS id=19180
ARCm started with pid=55, OS id=16632
ARCn started with pid=56, OS id=17588
ARCo started with pid=57, OS id=11948
ARCp started with pid=58, OS id=18416
ARCq started with pid=59, OS id=17888
ARCr started with pid=60, OS id=2144
ARCs started with pid=61, OS id=14392
Fri Apr 12 19:13:33 2013
ARC0: Archival started
ARCt started with pid=62, OS id=19264
Fri Apr 12 19:13:33 2013
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
Fri Apr 12 19:13:33 2013
Thread 1 advanced to log sequence 117447 (thread open)
Thread 1 opened at log sequence 117447
Current log# 8 seq# 117447 mem# 0: G:\ORADATA\REDO08A.LOG
Current log# 8 seq# 117447 mem# 1: H:\ORADATA\REDO08B.LOG
Successful open of redo thread 1
Fri Apr 12 19:13:33 2013
ARC3: Becoming the 'no FAL' ARCH
Fri Apr 12 19:13:33 2013
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Fri Apr 12 19:13:33 2013
ARC3: Becoming the 'no SRL' ARCH
Fri Apr 12 19:13:33 2013
ARCr: Becoming the heartbeat ARCH
Fri Apr 12 19:13:33 2013
SMON: enabling cache recovery
Fri Apr 12 19:13:33 2013
Successfully onlined Undo Tablespace 1.
Fri Apr 12 19:13:33 2013
SMON: enabling tx recovery
Fri Apr 12 19:13:33 2013
Database Characterset is WE8MSWIN1252
Opening with internal Resource Manager plan
where NUMA PG = 1, CPUs = 16
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=63, OS id=14896
Fri Apr 12 19:13:34 2013
Completed: alter database open
Fri Apr 12 19:13:34 2013
ALTER SYSTEM disable restricted session;
Fri Apr 12 19:13:35 2013
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_mmon_15320.trc:
ORA-19815: WARNING: db_recovery_file_dest_size of 2147483648 bytes is 99.56% used, and has 9486336 remaining bytes available.
Fri Apr 12 19:13:35 2013
You have following choices to free up space from flash recovery area:
1. Consider changing RMAN RETENTION POLICY. If you are using Data Guard,
then consider changing RMAN ARCHIVELOG DELETION POLICY.
2. Back up files to tertiary device such as tape using RMAN
BACKUP RECOVERY AREA command.
3. Add disk space and increase db_recovery_file_dest_size parameter to
reflect the new space.
4. Delete unnecessary files using RMAN DELETE command. If an operating
system command was used to delete files, then use RMAN CROSSCHECK and
DELETE EXPIRED commands.
Fri Apr 12 19:13:36 2013
Error 12514 received logging on to the standby
Fri Apr 12 19:13:36 2013
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arc0_18508.trc:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
FAL[server, ARC0]: Error 12514 creating remote archivelog file 'stdby'
FAL[server, ARC0]: FAL archive failed, see trace file.
Fri Apr 12 19:13:36 2013
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arc0_18508.trc:
ORA-16055: FAL request rejected
ARCH: FAL archive failed. Archiver continuing
Fri Apr 12 19:19:33 2013
Error 12514 received logging on to the standby
Fri Apr 12 19:19:33 2013
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arcr_2144.trc:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
PING[ARCr]: Heartbeat failed to connect to standby 'stdby'. Error is 12514.
Fri Apr 12 19:22:52 2013
PING[ARCr]: Heartbeat failed to connect to standby 'stdby'. Error is 12514.
Fri Apr 12 20:09:34 2013
Error 12514 received logging on to the standby
Fri Apr 12 20:09:34 2013
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arcr_2144.trc:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
PING[ARCr]: Heartbeat failed to connect to standby 'stdby'. Error is 12514.
Fri Apr 12 20:13:50 2013
Sat Apr 13 01:54:52 2013
Error 12514 received logging on to the standby
Sat Apr 13 01:54:52 2013
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arcr_2144.trc:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
PING[ARCr]: Heartbeat failed to connect to standby 'stdby'. Error is 12514.
Sat Apr 13 12:35:12 2013
Error 12514 received logging on to the standby
Sat Apr 13 12:35:12 2013
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arcr_2144.trc:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
PING[ARCr]: Heartbeat failed to connect to standby 'stdby'. Error is 12514.
Sat Apr 13 12:37:01 2013
ALTER SYSTEM SET log_archive_dest_state_2='DEFER' SCOPE=MEMORY;
Sat Apr 13 12:38:23 2013
Unable to allocate flashback log of 1946 blocks from
current recovery area of size 2147483648 bytes.
Current Flashback database retention is less than target
because of insufficient space in the flash recovery area.
Flashback will continue to use available space, but the
size of the flash recovery area must be increased to meet
the Flashback database retention target
Use ALTER SYSTEM SET db_recovery_file_dest_size command
to add space. DO NOT manually remove flashback log files
to create space.
Sat Apr 13 12:38:41 2013
ALTER SYSTEM SET db_recovery_file_dest_size='5G' SCOPE=MEMORY;
Sat Apr 13 12:38:41 2013
db_recovery_file_dest_size of 5120 MB is 39.82% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Sat Apr 13 15:42:21 2013
ORA-01555 caused by SQL statement below (SQL ID: 2zb70pwz9p06q, Query Duration=1365847941 sec, SCN: 0x0001.b3c0f735):
Sat Apr 13 15:42:21 2013
SELECT * FROM RELATIONAL("ORISSA_TRANSACTION"."SELLER_BIOMETRICS_TBL")
Sat Apr 13 15:48:37 2013
Thread 1 advanced to log sequence 117452 (LGWR switch)
Current log# 10 seq# 117452 mem# 0: G:\ORADATA\REDO10A.LOG
Current log# 10 seq# 117452 mem# 1: H:\ORADATA\REDO10B.LOG
Sat Apr 13 20:31:00 2013
The value (30) of MAXTRANS parameter ignored.
kupprdp: master process DM00 started with pid=31, OS id=16196
to execute - SYS.KUPM$MCP.MAIN('SYS_EXPORT_SCHEMA_30', 'ORISSA_TRANSACTION', 'KUPC$C_1_20130413203100', 'KUPC$S_1_20130413203100', 0);
kupprdp: worker process DW01 started with worker id=1, pid=66, OS id=16200
to execute - SYS.KUPW$WORKER.MAIN('SYS_EXPORT_SCHEMA_30', 'ORISSA_TRANSACTION');
Sun Apr 14 00:00:11 2013
Thread 1 advanced to log sequence 117453 (LGWR switch)
Current log# 8 seq# 117453 mem# 0: G:\ORADATA\REDO08A.LOG
Current log# 8 seq# 117453 mem# 1: H:\ORADATA\REDO08B.LOG
Sun Apr 14 00:00:52 2013
Thread 1 advanced to log sequence 117454 (LGWR switch)
Current log# 9 seq# 117454 mem# 0: G:\ORADATA\REDO09A.LOG
Current log# 9 seq# 117454 mem# 1: H:\ORADATA\REDO09B.LOGlike you show in the alert.log:
PROBLEM
Unable to allocate flashback log of 1946 blocks from
current recovery area of size 2147483648 bytes.
Current Flashback database retention is less than target
because of insufficient space in the flash recovery area.
Flashback will continue to use available space, but the
size of the flash recovery area must be increased to meet
the Flashback database retention target
Use ALTER SYSTEM SET db_recovery_file_dest_size command
to add space. DO NOT manually remove flashback log files
to create space.
SOLUTION
Fri Apr 12 19:12:51 2013
You have following choices to free up space from flash recovery area:
1. Consider changing RMAN RETENTION POLICY. If you are using Data Guard,
then consider changing RMAN ARCHIVELOG DELETION POLICY.
2. Back up files to tertiary device such as tape using RMAN
BACKUP RECOVERY AREA command.
3. Add disk space and increase db_recovery_file_dest_size parameter to
reflect the new space.
4. Delete unnecessary files using RMAN DELETE command. If an operating
system command was used to delete files, then use RMAN CROSSCHECK and
DELETE EXPIRED commands.
************************************************************************choose one and try again. Post if you have more issues. -
Did you have Cloud start failures or a missing health monitor?
Calling all CQ Cloud'ers.
Hi, My name is Gary Gilchrist. I work with the engineering team for Adobe CQ Cloud.
Today I was running some diagnostics on our site. I see that there are a lot of you out there who have got as far as starting your own CQ Cloud. Congratulations!
But I also see a number of Clouds that have been attempted to be started by different tenants (that's you :)) and never made it as far as the "running" state. There are sometimes good reasons for this, sometimes related to configuration of your Amazon AWS key information. But we're still in Beta and I must admit, we know of a few bugs we still need to iron out.
I also see that some Clouds were started successfully, yet I do not see the automatic health monitoring that we record for your Cloud. We do that after a Cloud starts so that you can see the CPU, Memory and Disk health of your CQ instances running in your Cloud. You should see this as little green bars in your Cloud detail page.
I have two questions:
Did you attempt to start a Cloud (and you believe your AWS credential is valid) yet it failed to completely start up?
Did you start a Cloud successfully, yet you continued to see "unavailable" (gray bar) as the heath status for ALL the CQ instances in your Cloud? (please note that health monitoring for the Dispatcher is not working. It will fixed with our next update to the site, coming shortly).
If you did encounter 1 or 2 above please drop a reply on this thread giving only the name of your Cloud (no other personal information necessary) plus anything else you think is useful. We would like to look into it.
Thanks from the whole team here at Adobe for trying out CQ Cloud!
Gary.1. Cloud start failure, cloud name: cf
I attached more details about the failure in thread Unable to start the cloud -
ALTER DATABASE START LOGICAL STANDBY APPLY INITIAL
I am using oracle 9.2.0.8 db version. I am trying to configure logical standby database. When I issue "ALTER DATABASE START LOGICAL STANDBY APPLY INITIAL" i get following error.
ERROR at line 1:
ORA-01427: single-row subquery returns more than one row
ORA-06512: at line 1Hello,
Please, have a look on the Alert log fille, and post the error message if any.
May be you'll have more information about the offending subquery.
Best regards,
Jean-Valentin -
How to automate the Oracle database start and shutdown process
How we can automate and oracle database start and stop procees with Linux start/shutdown process.
I want to automatically start the oracle database at the time linux server and shutdown the database on shutdown linux server.Hi,
I can share my scripts:
1) /home/oracle/start_oracle.sh
#Script should be ran as Oracle user
cd /tmp
export ORACLE_SID=orcl
export ORACLE_HOME=/oracle/ora9i
lsnrctl start
sqlplus -S /nolog <<ENDSQL
connect / as sysdba
startup
exit
ENDSQL
emctl start dbconsole
isqlplusctl start
NOTE: emctl and isqlplus are optional
2) /home/oracle/stop_oracle.sh
#Script should be ran as Oracle user
cd /tmp
export ORACLE_SID=orcl
export ORACLE_HOME=/oracle/ora9i
isqlplusctl stop
emctl stop dbconsole
sqlplus -S /nolog <<ENDSQL
connect / as sysdba
shutdown immediate
exit
ENDSQL
lsnrctl stop
NOTE: emctl and isqlplus are optional
Then what you need:
1) K91oracle_stop (put it in the desired run level)
#!/bin/bash
# description: Stop Oracle before reboots
su - oracle -c "/home/oracle/stop_oracle.sh" >> /home/oracle/stoporacle.log
2) S91oracle_start (put it in the desired run level)
#!/bin/bash
# description: Start Oracle after reboots
su - oracle -c "/home/oracle/start_oracle.sh" >> /home/oracle/startoracle.log
Bye. -
[SOLVED]X start failure after upgrade: dri3,present modules missing
I start X with ~.xinitrc from console, which won"t work after last upgrade --first in two weeks.
(EE) Server terminated with error (1).Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
Xorg.log.0 :
[51:778] (EE) intel: Failed to load module "dri3" (module does not exist, 0)
[51:779] (EE) intel: Failed to load module "present" (module does not exist, 0)
Installed packages (EDIT: completed):
xf86-video-intel-2.99.{914-4,916-1}-i686 and also tried with xf86-video-intel-git, with "SNA" acceleration.
intel-dri 10-2.7-3
dri2proto 2.8-2
dri3proto 1.0-1
xf86driproto 2.1.1-3
Linux 3.15.5-2-ARCH i686
Linux CK Atom 3.16.2-1
Issue occurred after upgrading from v2.99.912-1 to v2.99.914+. I was going to try downgrade xf86-video-intel to v2.99.912-1 (as in the first thread in Refs) but went in a dependency conflict, with the older intel driver requiring glamor-egl which conflicts with xorg-server ':-|
Atom netbook
lspci:
00:02.0 VGA compatible controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
Some refs :
» [SOLVED] X start failure after upgrade https://bbs.archlinux.org/viewtopic.php?pid=1426837
» [Solved] xf86-video-Intel-2.99.912-1 breaks xorg https://bbs.archlinux.org/viewtopic.php?id=182932
Last edited by kozaki (2014-09-12 09:45:53)The issue occurred after upgrading from xf86-video-intel-v2.99.912-1 to v2.99.914+ and xorg-server-1.15.2-1 to 1.16.0-6 (and -devel).
same issue if:
- Switching accelaration method to "UXA" as per https://bugs.archlinux.org/task/40860
- Adding Option "DRI" "False"
Digged a bit:
- same modules errors but appears to be a Gnome bug (X starts): https://bbs.archlinux.org/viewtopic.php?pid=1441716
- same modules errors but X starts up without problems http://www.linuxquestions.org/questions … 175511372/
makes me doubt if this issue is related to the modules not found. Which is the single indication I found so far x-/
Any light on where can the issue comes from? hardware is pretty much standard even if getting a bit old. Never had Xorg related issue so far on this pancake.
Last edited by kozaki (2014-09-11 11:05:42) -
Hi All,
I have found that the Jco connections got affected for the EP7 system, the reason of which was SLD server failure. I have found that the SLD server was stopped.
I have started it anyway, but wanted to know why it stopped. The following are the logs found. Can anybody help in getting the reason.
#2 11/09/2007 04:32:23.259 [SAPEngine_Application_Thread[impl:3]_5] WARNING com.sap.lcr.sagent.DataSupplierServlet: Request ignored! Received data for SLD bridge from 163.243.220.221. Bridge not started.
#1 11/07/2007 21:25:06.469 [SAPEngine_Application_Thread[impl:3]_10] WARNING com.sap.lcr.sagent.DataSupplierServlet: Request ignored! Received data for SLD bridge from 163.243.220.221. Bridge not started.
#0 11/07/2007 16:44:47.705 [SAPEngine_Application_Thread[impl:3]_24] FATAL com.sap.lcr.start.StartDirector: SLD start failure, profile parameter ObjectManager.BufferInstances must be set to FALSE in J2EE cluster environment. Change the SLD profile and start the application again.
Thanks,
VR.Hi Vera,
From SLD manual; qoute "On an SAP J2EE Engine cluster with more. than one node, you must set the parameter BufferInstances to "false""
Page 19 from the manual below,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fd876513-0a01-0010-65ad-a63701bedd8d
Regards
Juan -
I have installed the NW4-Testdrive on a SuSE Linux 9.0 System. All installation processes have been finished very well. After I typed 'sapstart' (in user context of nw4adm, as described) the saposcol starts up all right. But starting the database failed.
The error message in /sapmnt/home/nw4adm/startdb.log is:
dbmcli: connect check finished with return code: 0
Starting Database Instance...
OK
Opening Database...
ERR
-24894,ERR_SHUTDOWN: shutdown of database occured
-71,connection broken server state 6
Connect to the database to verify the database is now open
dbmcli check finished with return code: 0
Database start failed
What can I do to get started??Hallo Ralf,
please look into MaxDB/SAP DB independend data directory for the file /<indep_data>/wrk/<DBID>/knldiag . The reason must be traced there. The note must be placed before the token 'current write position'. It would be enough if you search using just 'current' token. Check additionally whether the xserver is running. As <sid>adm user just enter the shell command: x_server -U.
greetings,
Alexander -
ANN: Database Starter Kits available
WebAssist is proud to announce the release of the Database
Starter Kit. Each
Database Starter Kit includes three example databases,
working files and
several hours of self-paced training to teach you how to
build
database-driven sites in Dreamweaver. There are currently two
Database
Starter Kits available:
For ASP with Access and SQL Server:
http://www.webassist.com/professional/products/productdetails.asp?PID=121
For PHP with MySQL:
http://www.webassist.com/professional/products/productdetails.asp?PID=122
Each Database Starter Kit is only $9.99.
Best - Joe
Joseph Lowery
Vice President of Marketing, WebAssist
Author, Dreamweaver 8 BibleGood thing you didn't price them @ $8.95.
Walt
"Joseph Lowery" <[email protected]> wrote in
message
news:eq0670$a04$[email protected]..
> Yeah, these new products are running out the door and
we're getting
> slammed. Our IT guys are on it, but it may be a bit
before the flood
> subsides.
>
> - Joe
>
>
> "Ken Binney" <[email protected]>
wrote in message
> news:eq03ce$6nk$[email protected]..
>> Joe, your server is crawling ar 2:24 PM EST
>>
>> "Joseph Lowery" <[email protected]> wrote
in message
>> news:epvv4g$1ns$[email protected]..
>>> WebAssist is proud to announce the release of
the Database Starter Kit.
>>> Each
>>> Database Starter Kit includes three example
databases, working files and
>>> several hours of self-paced training to teach
you how to build
>>> database-driven sites in Dreamweaver. There are
currently two Database
>>> Starter Kits available:
>>>
>>> For ASP with Access and SQL Server:
>>>
http://www.webassist.com/professional/products/productdetails.asp?PID=121
>>>
>>> For PHP with MySQL:
>>>
http://www.webassist.com/professional/products/productdetails.asp?PID=122
>>>
>>> Each Database Starter Kit is only $9.99.
>>>
>>>
>>> --
>>> Best - Joe
>>> Joseph Lowery
>>> Vice President of Marketing, WebAssist
>>> Author, Dreamweaver 8 Bible
>>>
>>
>>
>
> -
PDB doesn't take underscore parameters during database start
Hello
All underscore parameters which are set on a PDB level are ignored during database start.
An underscore parameter is set on a PDB level in memory and spfile. After restarting database the parameter is still in pfile but not anymore in memory.
SQL&gt; show pdbs
CON_ID CON_NAME OPEN MODE RESTRICTED
2 PDB$SEED READ ONLY NO
3 Q00A READ WRITE NO
SQL&gt; alter session set container=Q00A;
SQL&gt; alter system set -_push_join_union_view-=FALSE scope=both sid=&#39;*&#39;;
SQL&gt; show parameter -_push_join_union_view-
NAME TYPE VALUE
_push_join_union_view boolean FALSE
SQL&gt; show spparameter -_push_join_union_view-
SID NAME TYPE VALUE
* _push_join_union_view boolean FALSE
srvctl stop db -d cdbq00r; srvctl start db -d cdbq00r
SQL&gt; show parameter -_push_join_union_view-
no rows
SQL&gt; show spparameter -_push_join_union_view-
SID NAME TYPE VALUE
* _push_join_union_view boolean FALSE
Thanks
VenkatIn the future please post multitenant questions in the Multitenant forum
Multitenant
Based on what you posted we can NOT tell WHAT database/PDB that last command is showing data for or what DBs are being started and opened.
A STARTUP command only starts/opens the root/CDB by default. It does NOT open ANY PDBs.
If you want PDBs to be opened at startup you need to create an AFTER STARTUP trigger to open them.
The code you posted shows a startup but does NOT show if the PDB is open and does NOT show that the current container is the PDB when you check that parameter.
Rerun your test and post ALL of the info needed that shows:
1. the PDB is actually being opened,
2. the current container is set to the PDB
3. the value of the parameter for that PDB
That is, AFTER you stop/restart the database use EXACTLY the same commands you used at the start: show the pdbs, change the container to the PDB and then show the parameter value.
Post the FULL results of doing ALL of that. -
Hal start failure,relogin gdm,and cant see gnome desktop
Hal start failure,relogin gdm,and cant see gnome desktop
When system start ,I can see gdm. When you enter a user and name password to login the desktop, the screen flash, immediately logout from the desktop,Back to the login interface.
manual start hal ,failure.
Thanks.
Last edited by wevol (2009-12-18 14:12:35)I had a similar issue with HAL on my netbook (Lenovo S10e) running arch i686 kernelversion 2.6.32. When typing as root
$ /etc/rc.d/hal start
it failed.
I then killed the hald process via
$ killall hald
and now it starts fine.
Don't know what caused the problem, has there been a hal update recently? -
Database initialisation failure
Hi all, i put this question to all you solaris heads out there. I installed Solaris 10 on a HP ML-110, and installation was a success, however upon booting into Solaris i am greeted with the above mentioned error; database initialisation failure svc.configd exited with status 102. I am only a newbie and wondering if someone can help me to create or restore one of these database repositories which it needs to successfully startup?
Any help is greatly appreciated.
Cheers, AndrewHi Deepali,
In case you are using g6 and above, try running the diagnostics to see all 15 tasks are complete with OK status. Then
1)check for the port your database server is using for SQL. Its by default 1433 but in case its an instance, you would need to check from the registry to see what is the exact port being used by the instance. The test would actually show you "database found" result for the default port but that might be wrong
2)make sure you run the database scripts in correct order.
Hope this helps -
Require database start shut script
Dear Gurus
I need a script of automatic startup and shutdown of database on ibm - aix
rgds#!/bin/bash
#Oracle Start/Stop the Oracle Enterprise Manager Database11g.
#Start Sequence:
#1. Start Listeners <= Start all the listeners
#2. Start database <= start the database
#3. Start EM <= This will start EM.
#Stoping Grid Control 11g.
#Stop Sequence:
#1. Stop EM
#2. Stop database
#3. Stop Listeners
export ORA_OWNER=oracle
export ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
# Source function library.
. /etc/init.d/functions
RETVAL=0
# See how we were called.
start() {
echo -n "Starting Enterprise Manager Database 11g:"
# Starting of Database Listener
su - $ORA_OWNER -c "$ORACLE_HOME/bin/lsnrctl start"
# Starting Database
su - $ORA_OWNER -c "$ORACLE_HOME/bin/dbstart"
# Starting EM (Start EM)
su - $ORA_OWNER -c "$ORACLE_HOME/bin/emctl start dbconsole"
return $RETVAL
stop() {
echo -n "Stopping Oracle Enterprise Manager Database 11g"
# Stoping OMS (Stop Webtier and OMS)
su - $ORA_OWNER -c "$ORACLE_HOME/bin/emctl stop dbconsole"
#Stoping Database
su - $ORA_OWNER -c "$ORACLE_HOME/bin/dbshut"
#Stoping of Database Listener
su - $ORA_OWNER -c "$ORACLE_HOME/bin/lsnrctl stop listener"
return $RETVAL
restart() {
stop
start
case "$1" in
start)
start
stop)
stop
restart)
restart
echo $"Usage: $0 {start|stop|restart}"
RETVAL=1
esac
exit $RETVAL
above is the script which is doing the database start stop.
i also want to stop start the middleware(weblogic)
and
frontend forms and report
please do share if someone knows as its going away from database.
thanks in advance
Maybe you are looking for
-
How can I get my music files back when they are no longer on the computer?
So the problem I am having is that I cannot play songs on the playlist because "the file cannot be located" error. I checked the iTunes media folder and they weren't there. I searched my whole computer and they still could not be found. The story be
-
Do I have to delete all of my itunes?!
I got my iPod last christmas and I had over 500 songs on itunes, some of which i bought but most i put on from my cd's. My computer recently crashed and I had to send it in to get fixed, when I got my computer back, i had to reinstall itunes (this ha
-
How can I get rid of the playlist bar in the music player?
Hello everyone! I want to know if I can get rid of the transparent playlist bar which shows over the cover artwork in the music player (ios 6) or Lagu. When I play one song alone, the artwork shows fully and that's how I would like it to be when play
-
Can you Export Flash Movie files to other formats?? Don see an Export to other File options. Would like to Export a Flash Movie or SWF file to a Quicktime or IPOD MPEG File. Anyone know where to do this? Do not see an Export to File option to that Fo
-
XML Driven Video Gallery with Playlist
Hi, I have put together a XML Driven Video Player with auto thumbnail detection but there is a problem.The Video plays but, The thumbs will not show. I think my thumbnail function is not reaching the correct node in my XML.Can someone take a look at