Table "StoredProcedure" not found when changing Database location in VS 2005.

I'm having a problem changing the datasource location when generating a report using the report viewer in VS2005. If the table is a stored procedure, I get the message "Table (StoredProcedureName) not found", but if the report references tables rather than a stored procedure the location is changed and the report runs successfully. The same problem was reported in earlier versions of Crystal Reports and was fixed in a service pack, but I couldn't find any documentation on the VS2005 version. Does anybody know how to fix this problem? I am using CrystalDecisions.CrystalReports.Engine.dll version 10.2.3600.0 and SQL Server 2000.

Peggy, I wonder if getting the latest SP for CR 10.2 will be better for now. SP 1 can be downloaded from here:
https://smpdl.sap-ag.de/~sapidp/012002523100006007872008E/crvs05sp1.exe
I\Let us know if that does not resolve the issue and we'll take a closer look before going all the way to CR XI.
With regards,
Ludek

Similar Messages

Not working. Change database location trough VB 6

Hi,
I just finished two reports in Crystal 10 using an Access Database (database location and query are hardcoded in the reports.
I made a small vb 6 application to launch the reports. Now I need to change database location for the reports trough VB 6. I have the following code, but it is not working. The reports do not show any data and I do not get any error. I think the problem is with the hardcoded query. The report is designed on this query and the field reference on the reports are like Command.Field1
I just want tho change database location in VB, but I want the report take the query that is in it.
I have the following code. How can I make them work.? Is there a better way to do it?
Dim Report As New CR2 'set up the report
Dim conn3 As New ADODB.Connection 'ADO connection
Dim rs As New ADODB.Recordset      'rs connection
Function F_ViewReport()
'On Error GoTo End_FormLoad
    Dim sSQL2 As String
    gsRootJob = "4850"
    Dim sSQL2 As String
    gsRootJob = "4850"
"SELECT Material.Job, Material.Indicator, PO_Detail.Order, Source.Act_Qty, Vendor.Name, PO_Header.PO, PO_Detail.Due_Date FROM (((Material LEFT JOIN Source ON Material.Material_Req = Source.Material_Req) LEFT JOIN PO_Detail ON Source.PO_Detail = PO_Detail.PO_Detail) LEFT JOIN PO_Header ON PO_Detail.PO = PO_Header.PO) LEFT JOIN Vendor ON PO_Header.Vendor = Vendor.Vendor WHERE (((Material.Job) Like '" & gsRootJob & "*')) ORDER BY Material.Job, PO_Header.PO, PO_Detail.Line;"
    Report.DiscardSavedData
    Set conn3 = New ADODB.Connection
    conn3.Open "provider=Microsoft.jet.OLEDB.4.0; Data Source=" & App.Path & "\Data tables.mdb"
    Set rs = New ADODB.Recordset
    rs.Open sSQL2, conn3, adOpenKeyset, adLockReadOnly
    Report.Database.SetDataSource rs, , 1
    CRViewer2.ReportSource = Report
    CRViewer2.DisplayTabs = False
    CRViewer2.ViewReport
    CRViewer2.Zoom 1
    Screen.MousePointer = vbHourglass
Please help!
cc

Hi Cris,
It seems that you are having issue with SDK's.
Post your question in SDK forum.
[SAP Crystal Reports, version for Visual Studio;
You can download samples from here:
[https://www.sdn.sap.com/irj/boc/samples]
That forum is monitored by qualified technicians and you will get a faster response there. Also, all SDK queries remain in one place and thus can be easily searched in one place.
Thank you for your understanding,
Regards,
Shweta

Database Table cannot be found when Verify Database

Post Author: brentlaw
CA Forum: Other
I have been using CRW 7 for many years. I recently upgraded to XI (I have current version). I can open existing reports and create new reports fine. The problem is when I Verify Database I get an error message "The Database table <tablename here> cannot be found. Remove this table from the report".
This happens to all existing and new created reports. The data fills correctly when previewing. The problem only occurs when Verifying Database.
I thought it might be an ODBC driver problem so I upgraded my driver to v 3.525.1117. At least I think I upgraded it I did not check the version before I installed SQL 2005 SP2. After installing SP2 it seemed to be fine but a week later the problem came back. Mysterious eh?
I am trying to launch a report from VB6 using RDC and rpt file. I get logged in correctly but at .viewreport I get a generic error message. I am assuming the problem is related the the issue I raise in this forum post.

Post Author: brentlaw
CA Forum: Other
I fixed the problem. In CR XI Developer Designer window I opened up Database-SetDataSourceLocation. I noticed that in "Properties" the last item "Use DSN Default Properties": was set to True. I changed this value to False. Now this problem is solved.
I am Not using Windows Authentication I am using SQLServer authentication. In my code I was passing SQLServer Authentication credentials.
I opened up all of my CR 7 reports in CR XI and changed this setting on both the Main and the Subreort property in the SetDataSourceLocation dialog box and now all my reports work. I am a happy camper.
I don't know if this is a CR 7 conversion to CR XI only situation or not. Hope this information helps someone else.

Workflow not found when changing QTY on PO

Hello, I am on SRM 5.5 Extended Classic.
I have a problem with approval workflow for PO.
I have activated WS14000075 (without approval) for both event SAVED and Save Change Version. This works fine when I create and save PO. But when I change the QTY on an exisiting PO, I get message "No workflow found".
I do not understand this as I have activated both the mentioned WFs (and the value change lower than the limit in Purchase Order.Total Value Diff).
How can I find out which event this change triggers, and any suggestion on how I should solve this?

Hi
Please go through this ->
In the workflow builder (SWDD) we use the navigation Area to check every workflow. I mean we did double click in each step, if the step had a subworkflow, then we open the subworhflow, checked it, and if it appeared the same error we have used the function module for the subworkflow. In this way you might solve the problem.
Also Use the Transaction code OOCU - Task customising overview.
Then SRM-EBP --> SRM-EBP-WFL then active event linking.
Other related links ->
Re: No approval workflow found error while processing the Bid Invitation
Error in WS14000075: Workflow definition '' not in version ''
Problem with WS14000075
Err "No workflow found" while creating bid
Do let me know.
Regards
- Atul

Error oracle.sql.* and oracle.jdbc.driver.* not found when using oracle as a database

I am using oracle as database and weblogic 4.5. I have copied the classes12.zip file in lib directory of weblogic. I am getting the error that oracle.sql.* and oracle.jdbc.driver.* not found when i am importing these packages in a jsp file. what i need to do to import oracle driver packages?I put it in the classpath also.
Please Advice!
Thanks in advance
AnuPama

Hi Anupama,
First of all I would be surprised if you would not like to use the connection pooling feature of weblogic (in which case you might not be needing the import the classes directly), and would like to open direct connections to your database. Anyways for doing that I would recommend you to check out the readme doc that ships
along with the jdbc oracle (classes12.zip etc). I am giving an excerpt over here:
These are a few simple things that you should do in your JDBC program:
1. Import the necessary JDBC classes in your programs that use JDBC.
For example:
import java.sql.*;
import java.math.*;
2. Register the Oracle driver before before calling other JDBC APIs.
(This is not needed if you are using the JDBC Server-side Internal
Driver because registration is done automatically in the server.)
To register the Oracle driver, make sure the following statement
is executed at least once in your Java session:
DriverManager.registerDriver(
new oracle.jdbc.driver.OracleDriver());
3. Open a connection to the database with the getConnection call.
Different connection URLs should be used for different JDBC
drivers. The following examples demonstrate the different URLs.
For the JDBC OCI8 Driver:
Connection conn = DriverManager.getConnection(
"jdbc:oracle:oci8:@<database>",
"scott", "tiger");
where <database> is either an entry in tnsnames.ora or a SQL*net
name-value pair.
For the JDBC Thin Driver, or Server-side Thin Driver:
Connection conn = DriverManager.getConnection(
"jdbc:oracle:thin:@<database>",
"scott", "tiger");
where <database> is either a string of the form
<host>:<port>:<sid> or a SQL*net name-value pair.
For the JDBC Server-side Internal Driver:
Connection conn = DriverManager.getConnection(
"jdbc:oracle:kprb:");
Note that the trailing ':' character is necessary. When you use
the Server-side Internal Driver, you always connect to the
database you are executing in. You can also do this:
Connection conn
= new oracle.jdbc.driver.OracleDriver().defaultConnection();
Hope this helps,
Thanks,
Anupama wrote:
I am using oracle as database and weblogic 4.5. I have copied the classes12.zip file in lib directory of weblogic. I am getting the error that oracle.sql.* and oracle.jdbc.driver.* not found when i am importing these packages in a jsp file. what i need to do to import oracle driver packages?I put it in the classpath also.
Please Advice!
Thanks in advance
AnuPama--
Apurb Kumar

Issue with changing database location at runtime

I am having a similar issue to:
Re: Issue with changing database location at runtime
where I am using Crystal Reports 2008 SP 3 fix pack 3.3 and a OLE DB connection to a SQL 2008 R2 server. Running on a computer on the network where the report can see the original development server is fast, other computers where that server is not available are hanging 20 seconds before coming up.
I am using the same code from the Crystal Sample app to change the connection on each table. I found that the slowness comes the first time the ReportDocument object is accessed to get the collection of database tables, before the connection info is set.
Fix pack 3.4 was mentioned in that post. Does fix pack 3.4 fix that issue? I don't see fix pack 3.4 on the downloads page (https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/bobj_download/main.htm)

I just found on the reports that were having the issue there was a SQL Expression. Per this thread:
Re: Report load is slow after changing database servers
There was an issue with that and the fix is not out til the end of Feb so I found a way not to use the SQL Expression and the speed is much better.
However, your information provided led me to this post:
Cannot Change Table Location, but Only for One Report
And I am also experiencing an issue where the table location is not changing on one subreport and I will look into that as a possible solution.
Thanks so much for your help.

SSO : krb_error 6 Client not found in Kerberos Database

Hi All,
We are trying to configure SSO for Win AD user to login to infoView
OS - Windows 2003 SP2
Machine - 64 Bit
BOE - XI 3.1 + SP2 + FP2.4 (32 Bit)
CMS Database - SQL 2005 Server
Domain Controller - Not sure if is 2003 or 2008 (awaiting information from client)
While executing the kinit
kinit BOSSO/<service accont name with FQDN> <password>
its throwing a "krb_error 6 Client not found in kerberos Database."
However Manual AD is working fine.
What could be the issue here.
Thanks and Regards
Ranjit Krishnan
Edited by: Ranjit Krishnan on Mar 24, 2010 2:56 PM

client not found in kerberos DB means the KDC was located but the username was not found. There are many reasons for this
1) typo in the username or when ktpass was run
2) duplicate UPN (caused by running ktpass on 2 or more accounts)
3) ktpass was not run on the account or not successfully so the username was never changed
4) there is a bug in AD with 2008 DC's when the UPN does not = the samaccountname which will throw this message (search SAP KB's for 2008 client not found in kerberos database and you'll find the link to the Microsoft article to patch it)
Regards,
Tim

Loaded dump from 12.5.4 to 15.7, Error 622 & Tables/Views not found

Hi all,
I am getting desperate trying to fix that issue. I had to import a dump from an ASE 12.5.4 into a new database on an ASE 15.7. I therefore enabled the compatibility mode server-wide and then proceeded to the load which seems to have performed correctly. The database seems well imported, and I can access most of the tables/views/procedures (from my C# application), but a procedure is giving me troubles.
I am getting this error while executing a given procedure :
Error: 622, Severity: 20, State: 1
Opentable was passed a varno of 52. Object 'temp worktable' in database 'tempdb' already has that session descriptor in use. This occured while opening object id -1245236 in database id 2.
I realised this was caused by a view which is used in this procedure but which is weird is that the error is not thrown when running the SQL code itself, out of the procedure context.
I am using Toad for Sybase as a client, and realised I cannot access the data tab of the concerned view, Toad gives me the same error. So I cannot execute this view while it performs without any trouble on the original server (production server which runs ASE 12.5.4).
I also realised, when trying to execute some pieces of the query individually that I get warnings about unfound tables (and that I should use sp_help to fix the problem). Although, the tables actually exists and I can access their data.
I have tried so many things and still cannot fix this problem. I've used 'upgrade_object', 'sp_recompile' on all tables, 'dbcc reindex' on all tables.
Would you have any idea where the problem could come from? Thank you very much

Thank you for your reply.
Good to know that enabling compatibility mode before or after loading the load doesn't have any effect.
I didn't drop/recreate all the SP and views but I can tell you I recreated a similar view and it causes the same issue.
I had a look at your link yes. I have run 'dbcc upgrade_object' several times already, on the view and the procedures calling the view, and it won't solve anything.
I've seen a similar post about the problem I have when executing the code itself of the view in a "normal" adhoc query (errors saying the tables are not found) : SAP Sybase Forums - ASE - Backup and Recovery - PRoblem after restore - Object does not exist.
Could it be the same problem for me?
Although I've tried splitting the SQL query and executing the parts individually and it works without any trouble. Problem is when the 2 parts of the view are put together. It may be something that was possible with ASE 12.5.4 but not with 15.7 and that compatiblity mode doesn't solve. My view consists of an union a two selects where both have left joins, case when then else, not in and a final group by (adding an order by doesn't help, as I tried).
PS : I don't have access to the production server where the dump is actually from (but I could if it is really necessary)

Drive not found in library database

Greetings.
I'm new to OSB and am having tape drive, volume problems.
File system backups only complete successfully when drive (IBM4_0_0_1_1) is used. When OSB attempts to use other drives in the library it logs the following errors listed in "Transcript".
I'm running OSB (10.4.0.3.0) on a Linux server (Oracle Linux Server release 6.0) with a SL500 library controller by a ACSLS(8.3.0) server.
Please advise.
Transcript:
2014/04/23.11:44:01 ______________________________________________________________________
2014/04/23.11:44:01
2014/04/23.11:44:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:44:01
2014/04/23.11:44:01 ---
2014/04/23.11:44:01 No volume could be found in SL500 (for drive HP6_0_0_3_1) to use for job admin/83.1.
2014/04/23.11:44:01 The problem using HP6_0_0_3_1 and the volume it contains, if any, is
2014/04/23.11:44:01 drive not found in library database (library manager)
2014/04/23.11:45:01 ______________________________________________________________________
2014/04/23.11:45:01
2014/04/23.11:45:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:45:01
2014/04/23.11:45:01 ---
2014/04/23.11:45:01 No volume could be found in SL500 (for drive HP5_0_0_2_4) to use for job admin/83.1.
2014/04/23.11:45:01 The problem using HP5_0_0_2_4 and the volume it contains, if any, is
2014/04/23.11:45:01 drive not found in library database (library manager)
2014/04/23.11:46:01 ______________________________________________________________________
2014/04/23.11:46:01
2014/04/23.11:46:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:46:01
2014/04/23.11:46:01 ---
2014/04/23.11:46:01 No volume could be found in SL500 (for drive IBM5_0_0_1_2) to use for job admin/83.1.
2014/04/23.11:46:01 The problem using IBM5_0_0_1_2 and the volume it contains, if any, is
2014/04/23.11:46:01 drive not found in library database (library manager)
2014/04/23.11:48:01 ______________________________________________________________________
2014/04/23.11:48:01
2014/04/23.11:48:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:48:01
2014/04/23.11:48:01 ---
2014/04/23.11:48:01 No volume could be found in SL500 (for drive HP4_0_0_2_2) to use for job admin/83.1.
2014/04/23.11:48:01 The problem using HP4_0_0_2_2 and the volume it contains, if any, is
2014/04/23.11:48:01 drive not found in library database (library manager)
2014/04/23.11:49:01 ______________________________________________________________________
2014/04/23.11:49:01
2014/04/23.11:49:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:49:01
2014/04/23.11:49:01 ---
2014/04/23.11:49:01 No volume could be found in SL500 (for drive IBM5_0_0_2_1) to use for job admin/83.1.
2014/04/23.11:49:01 The problem using IBM5_0_0_2_1 and the volume it contains, if any, is
2014/04/23.11:49:01 drive not found in library database (library manager)
2014/04/23.11:50:01 ______________________________________________________________________
2014/04/23.11:50:01
2014/04/23.11:50:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:50:01
2014/04/23.11:50:01 ---
2014/04/23.11:50:01 No volume could be found in SL500 (for drive HP5_0_0_2_3) to use for job admin/83.1.
2014/04/23.11:50:01 The problem using HP5_0_0_2_3 and the volume it contains, if any, is
2014/04/23.11:50:01 drive not found in library database (library manager)
2014/04/23.12:00:01 ______________________________________________________________________
2014/04/23.12:00:01
2014/04/23.12:00:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:00:01
2014/04/23.12:00:01 ---
2014/04/23.12:00:01 No volume could be found in SL500 (for drive HP6_0_0_3_1) to use for job admin/83.1.
2014/04/23.12:00:01 The problem using HP6_0_0_3_1 and the volume it contains, if any, is
2014/04/23.12:00:01 drive not found in library database (library manager)
2014/04/23.12:01:01 ______________________________________________________________________
2014/04/23.12:01:01
2014/04/23.12:01:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:01:01
2014/04/23.12:01:01 ---
2014/04/23.12:01:01 No volume could be found in SL500 (for drive HP5_0_0_2_4) to use for job admin/83.1.
2014/04/23.12:01:01 The problem using HP5_0_0_2_4 and the volume it contains, if any, is
2014/04/23.12:01:01 drive not found in library database (library manager)
2014/04/23.12:01:24 ______________________________________________________________________
2014/04/23.12:01:24
2014/04/23.12:01:24 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:01:24
2014/04/23.12:01:25 ---
2014/04/23.12:01:25 No volume could be found in SL500 (for drive IBM5_0_0_1_2) to use for job admin/83.1.
2014/04/23.12:01:25 The problem using IBM5_0_0_1_2 and the volume it contains, if any, is
2014/04/23.12:01:25 drive not found in library database (library manager)
2014/04/23.12:04:01 ______________________________________________________________________
2014/04/23.12:04:01
2014/04/23.12:04:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:04:01
2014/04/23.12:04:01 ---
2014/04/23.12:04:01 No volume could be found in SL500 (for drive HP4_0_0_2_2) to use for job admin/83.1.
2014/04/23.12:04:01 The problem using HP4_0_0_2_2 and the volume it contains, if any, is
2014/04/23.12:04:01 drive not found in library database (library manager)
2014/04/23.12:05:01 ______________________________________________________________________
2014/04/23.12:05:01
2014/04/23.12:05:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:05:01
2014/04/23.12:05:01 ---
2014/04/23.12:05:01 No volume could be found in SL500 (for drive IBM5_0_0_2_1) to use for job admin/83.1.
2014/04/23.12:05:01 The problem using IBM5_0_0_2_1 and the volume it contains, if any, is
2014/04/23.12:05:01 drive not found in library database (library manager)
2014/04/23.12:05:21 ______________________________________________________________________
2014/04/23.12:05:21
2014/04/23.12:05:21 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:05:21
Backup started on Wed Apr 23 2014 at 12:05:51
Volume label:
Volume tag: LEV018
Volume UUID: 203f144a-ad72-1031-9e4c-002128001bbe
Volume ID: mf_2min-000025
Volume sequence: 1
Volume set owner: root
Volume set created: Wed Apr 23 12:05:51 2014
Volume set expires: Wed Apr 23 12:07:51 2014
Media family: mf_2min
Original UUID: 203f144a-ad72-1031-9e4c-002128001bbe
Archive label:
File number: 1
File section: 1
Owner: root
Client host: x4440a
Backup level: 0
S/w compression: no
Archive created: Wed Apr 23 12:05:51 2014
Encryption: off
Dumping all files in /etc
Backup complete on Wed Apr 23 2014 at 12:06:03
Backup statistics:
status 0
devices IBM4_0_0_1_1
devices 1
volumes mf_2min-000025
voltags LEV018
file 1
host x4440a
encryption off
start_time Wed Apr 23 2014 at 12:05:51 (1398276351)
end_time Wed Apr 23 2014 at 12:06:06 (1398276366)
backup_time Wed Apr 23 2014 at 12:05:51 (1398276351)
entries_scanned 3373
kbytes_scanned 40556
entries_excluded 0
entries_skipped 0
mount_points_skipped 0
files 2047
directories 315
hardlinks 0
symlinks 1011
sparse_files 0
filesys_errors 0
unknown_type 0
file_kbytes 39264
dev_kbytes 35977
dev_iosecs 2
dev_iorate 18.4 MB/S
wrt_iosecs 15
wrt_iorate 2.5 MB/S
physical_blks_written 1102
write_errors 0
physical_blks_read 2
read_errors 0
error_rate 0%
path /etc completed, status 0
[root@x4440a backup]# obtool lsdev -lvg
SL500:
     Device type:            library (ACSLS)
     In service:             yes
     Debug mode:             no
     Barcode reader:         yes
     Barcodes required:      yes
     Unload required:        yes
     Ejection type:          auto
     Min writable volumes:   0
     UUID:                   e0b58224-a1a4-1031-8c0f-002128001bbe
     Attachment 1:
         Host:               x4440a
         ACSLS server:       v215f
         ACSLS port:         0
         ACS id:             0
         ACSLS access id:    acsss
     Reservation 1:
         Component:          obacslibd
         Host:               x4440a
         Process:            32195
     Element counts / addresses:
        10 mte: 1 - 10
       281 se : 1 - 281
         1 iee: 1
         1 dte: 1
     Moves:
        From mte, to: mte 0   se 0   iee 0   dte 0
        From se, to: mte 0   se 0   iee 1   dte 1
        From iee, to: mte 0   se 0   iee 0   dte 0
        From dte, to: mte 0   se 1   iee 0   dte 0
     Ok_ops: move=1, reserve=1 sense_dev=1, sense_ele=0, unload_any=1, sense_dev_range=0
     State of barcode reader: enabled
IBM4_0_0_1_1:
     Device type:            tape (ACSLS)
     In service:             yes
     Library:                SL500
     LSM:                    0
     Panel:                  1
     Drive:                  1
     Automount:              yes
     Error rate:             8
     Query frequency:        131072KB (134217728 bytes) (from driver)
     Debug mode:             no
     Blocking factor:        (default)
     Max blocking factor:    (default)
     Current tape:           [unknown]
     Drive usage:            14 minutes, 58 seconds
     UUID:                   179eb954-a1a5-1031-8c0f-002128001bbe
     Attachment 1:
         Host:               x4440a
         Raw device:         /dev/sg18
     Connection type:        SCSI
     Inquiry data:
         Vendor:             IBM
         Product:            ULTRIUM-TD4
         Firmware:           C7Q0
         Serial number:      1310127325
     Tape state:             offline
     Hardware compression:   on
     Last read was:          uncompressed
     Hardware encryption:    available
     Maximum block size:     2097152
IBM5_0_0_2_1:
     Device type:            tape (ACSLS)
     In service:             yes
     Library:                SL500
     LSM:                    0
     Panel:                  2
     Drive:                  1
     Automount:              yes
     Error rate:             8
     Query frequency:        131072KB (134217728 bytes) (from driver)
     Debug mode:             no
     Blocking factor:        (default)
     Max blocking factor:    (default)
     Current tape:           [unknown]
     Drive usage:            [not set]
     UUID:                   7498ff66-a1a5-1031-8c0f-002128001bbe
     Attachment 1:
         Host:               x4440a
         Raw device:         /dev/sg16
     Connection type:        SCSI
     Inquiry data:
         Vendor:             IBM
         Product:            ULTRIUM-TD5
         Firmware:           D8D4
         Serial number:      1168002114
     Tape state:             offline
     Hardware compression:   on
     Last read was:          uncompressed
     Hardware encryption:    available
     Maximum block size:     2097152
HP6_0_0_3_1:
     Device type:            tape (ACSLS)
     In service:             yes
     Library:                SL500
     LSM:                    0
     Panel:                  3
     Drive:                  1
     Automount:              yes
     Error rate:             8
     Query frequency:        131072KB (134217728 bytes) (from driver)
     Debug mode:             no
     Blocking factor:        (default)
     Max blocking factor:    (default)
     Current tape:           [unknown]
     Drive usage:            [not set]
     UUID:                   cd20d3fc-a1a5-1031-8c0f-002128001bbe
     Attachment 1:
         Host:               x4440a
         Raw device:         /dev/sg21
     Connection type:        SCSI
     Inquiry data:
         Vendor:             HP
         Product:            Ultrium 6-SCSI
         Firmware:           J39S
         Serial number:      HU1233PPNN
     Tape state:             offline
     Hardware compression:   on
     Last read was:          uncompressed
     Hardware encryption:    available
     Maximum block size:     2097152
IBM5_0_0_1_2:
     Device type:            tape (ACSLS)
     In service:             yes
     Library:                SL500
     LSM:                    0
     Panel:                  1
     Drive:                  2
     Automount:              yes
     Error rate:             8
     Query frequency:        131072KB (134217728 bytes) (from driver)
     Debug mode:             no
     Blocking factor:        (default)
     Max blocking factor:    (default)
     Current tape:           [unknown]
     Drive usage:            [not set]
     UUID:                   5b6cf420-a1a5-1031-8c0f-002128001bbe
     Attachment 1:
         Host:               x4440a
         Raw device:         /dev/sg15
     Connection type:        SCSI
     Inquiry data:
         Vendor:             IBM
         Product:            ULTRIUM-TD5
         Firmware:           D8D4
         Serial number:      1068002447
     Tape state:             offline
     Hardware compression:   on
     Last read was:          uncompressed
     Hardware encryption:    available
     Maximum block size:     2097152
HP4_0_0_2_2:
     Device type:            tape (ACSLS)
     In service:             yes
     Library:                SL500
     LSM:                    0
     Panel:                  2
     Drive:                  2
     Automount:              yes
     Error rate:             8
     Query frequency:        131072KB (134217728 bytes) (from driver)
     Debug mode:             no
     Blocking factor:        (default)
     Max blocking factor:    (default)
     Current tape:           [unknown]
     Drive usage:            [not set]
     UUID:                   8bd3659a-a1a5-1031-8c0f-002128001bbe
     Attachment 1:
         Host:               x4440a
         Raw device:         /dev/sg13
     Connection type:        SCSI
     Inquiry data:
         Vendor:             HP
         Product:            Ultrium 4-SCSI
         Firmware:           H64S
         Serial number:      HU1803168E
     Tape state:             offline
     Hardware compression:   on
     Last read was:          uncompressed
     Hardware encryption:    not available
     Maximum block size:     2097152
HP5_0_0_2_3:
     Device type:            tape (ACSLS)
     In service:             yes
     Library:                SL500
     LSM:                    0
     Panel:                  2
     Drive:                  3
     Automount:              yes
     Error rate:             8
     Query frequency:        131072KB (134217728 bytes) (from driver)
     Debug mode:             no
     Blocking factor:        (default)
     Max blocking factor:    (default)
     Current tape:           [unknown]
     Drive usage:            [not set]
     UUID:                   9ee7dbd4-a1a5-1031-8c0f-002128001bbe
     Attachment 1:
         Host:               x4440a
         Raw device:         /dev/sg23
     Connection type:        SCSI
     Inquiry data:
         Vendor:             HP
         Product:            Ultrium 5-SCSI
         Firmware:           I67S
         Serial number:      HU19477NFE
     Tape state:             offline
     Hardware compression:   on
     Last read was:          uncompressed
     Hardware encryption:    not available
     Maximum block size:     2097152
HP5_0_0_2_4:
     Device type:            tape (ACSLS)
     In service:             yes
     Library:                SL500
     LSM:                    0
     Panel:                  2
     Drive:                  4
     Automount:              yes
     Error rate:             8
     Query frequency:        131072KB (134217728 bytes) (from driver)
     Debug mode:             no
     Blocking factor:        (default)
     Max blocking factor:    (default)
     Current tape:           [unknown]
     Drive usage:            [not set]
     UUID:                   b45b889e-a1a5-1031-8c0f-002128001bbe
     Attachment 1:
         Host:               x4440a
         Raw device:         /dev/sg24
     Connection type:        SCSI
     Inquiry data:
         Vendor:             HP
         Product:            Ultrium 5-SCSI
         Firmware:           I67S
         Serial number:      HU19477NBF
     Tape state:             offline
     Hardware compression:   on
     Last read was:          uncompressed
     Hardware encryption:    available
     Maximum block size:     2097152
[root@x4440a backup]#
[root@x4440a backup]# obtool lsvol -L SL500 -l
Inventory of library SL500:
     in    1:             barcode F50216, oid 100
     in    2:             barcode I50116, oid 101
     in    3:             barcode LEV008, oid 102, mediainfo hw encryptable
     in    4:             barcode LEV010, oid 103, mediainfo hw encryptable
     in    5:             barcode LEV017, oid 104, mediainfo hw encryptable
     in    6:             volume mf_2min-000025, barcode LEV018, oid 155, 781232128 kb remaining, expired, mediainfo hw encryptable
     in    7:             barcode LEV049, oid 106
     in    8:             barcode LEV058, oid 107
     in    9:             barcode PQ4196, oid 108
     in    10:            barcode PQ4883, oid 109
     in    11:            barcode S50282, oid 110
     in    12:            barcode S50290, oid 111
     in    13:            barcode S50291, oid 112
     in    14:            barcode S50292, oid 113
     in    15:            barcode S50300, oid 114
     in    16:            barcode S60111, oid 115
     in    17:            barcode S60113, oid 116
     in    18:            barcode SF6410, oid 117
     in    19:            barcode SF6411, oid 118
     in    20:            barcode SF6412, oid 119
     in    21:            barcode SF6413, oid 120
     in    22:            barcode SF6414, oid 121
     in    23:            barcode SF6416, oid 122
     in    24:            barcode SF6417, oid 123
     in    25:            barcode SF6418, oid 124
     in    26:            barcode SF6419, oid 125
     in    27:            vacant
     in    28:            vacant
     in    29:            vacant
     in    30:            vacant
     in    31:            vacant
     in    274:           vacant
     in    275:           vacant
     in    276:           vacant
     in    277:           vacant
     in    278:           vacant
     in    279:           vacant
     in    280:           vacant
     in    281:           vacant
     in    iee:           vacant
     in    dte:           vacant
[root@x4440a backup]#

Rich
Thanks for your response.
ACSLS is part of the configuration requirements I need to have in this OBS environment.
I'm going to re install OBS just to see if anything changes.
Thanks again.
Update:
When configuring devices in OSB that are ACSLS in nature it is a requirement to restart the obacslibd after mkdev or certain chdev commands are preformed.
After the daemon was restarted I was able to use the attached tape drives.

XML File as Datasource - The table is not found in file

Hi,
I am trying to use a xml file as datasource and want to map those columns to the existing DWH. Actually, it is additional data which should be combined with the existing DWH data. Therefore I am using the fragmentation option.
I did it already on my privat pc and it works, but as soon as I implement it to the DEV environment it doesn' t work at all :( I am getting the following error:
Status: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 64002] The table is not found in file C:\Ist.xml loaded. (HY000)
Could somebody help me??
Thanks

If you changed environments make sure that the XML file actually exists in the location specified at C:\ist.xml.
Also be sure that the information in the properties section of the XML data source match your DEV environment. If you used any session variables be sure that you have also modified those in the DEV environment to reflect the DEV environment.
Did you switch from a same OS environment, i.e.: Linux to Linux or Windows to Windows? Or did you go from a Windows to Linux OS?

This procedure name is not found in the database: wwv_flow.show

I created an interactive report, which works fine in the APEX developer, using the Application Express Authentication scheme.
To add it to our Self-Service web system, I change the authentication scheme to a custom scheme that has been working fine for other applications, although I don't know of any other interactive reports using this scheme in Self-Service.
Anyway, the interactive report is displayed in our Self-Service system using the custom authentication scheme, but if I display the Action menu and click on one of the options (Filter, Sort, Compute...), a pop-up window is displayed saying:
This procedure name is not found in the database:
wwv_flow.show
That error is also displayed when I try to edit the displayed filters.
Does anyone know why I might be getting that error or have suggestions on things to try to track it down?
Thanks,
Laura

Laura,
To add it to our Self-Service web systemWhat does that mean? What did it entail?
I'm thinking maybe you embedded some relative links into a menu system in which the base href was not appropriate, ... or something.
Scott

When changing database directory in lk6.5, no alarms are logged anymore.

When changing database directory in lk6.5, no alarms are logged anymore. Traces are running ok, only any query in MAX concerning alarms, will result in an empty response

Hi Ryan,
I tried many ways. First as you described. Second; delete all databases (with MAX) and start lookout, hoping lk would make al necessary settings.
I tried short path name, long path name. All the same results; database will be made (or manually with Max or automatically by lk), all traces works, only NOT the Alarm logging. (database isn't corrupted, while a query done in MAX don't result in an error, just empty result).
I the meantime I found something;
C:\Documents and Settings\my name\my documents\Databse --> traces works, alarms not
C:\Program Files\National Instruments\Lookout 6.5\Database --> all works
So it seams that specificly "my documents" does'nt work for alarms, just for traces (????)
I also found the following message when trying to export the alarms; "The given Citadel database is not currently configured to log alarms to a relational database." Does this ring a bell?

Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11

Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11. I can see the tables and views in the database tab, but no stored procedures. If I connect to a data source created in ColdFusion Server 6 I am able to see the stored procedures.

Ben thanks for the reply!
Yes that is the process I am following:
In Dreamweaver, open the page that will run the stored procedure.
In the Bindings panel (Window > Bindings), click the Plus button, and then select Stored Procedure.
In the Data Source pop‑up menu, select a connection to the database containing the stored procedure
Enter the ColdFusion Data Source user name and password.
At this point in the procedure drop down I would get a message that said No Stored Procedure Found.
Right now it appears to be working, I had to create a new site that pointed to the older CF 6 server's data source and create a page following the process above, then when I went back to the CF 11 site the stored procedures were now populated. I need to make sure it is pulling from the correct server but right now it appears to be working.
Thanks
Dwight

Kinit: Client not found in Kerberos database while getting initial credentials

Hi all,
I am trying to configure application which uses Kerberos authentication.
Error message:
kinit: Client not found in Kerberos database while getting initial credentials
I use Windows Server 2003 domain controller as LDAP server, Tomcat application (on Linux) and IIS application as client, and apache load balancer.
There is multidomain environment: russia.domain.net, europa.domain.net, asia.domain.net;
Tomcat and IIS servers works behind a proxy server (Apache on Linux).
For applications created two DNS records type A. all DNS use IP address of Apache proxy server:
application-sandbox.russia.domain.net
applicationweb-sandbox.russia.domain.net
To confiure kerberos authentication i have performed the following steps:
1. Create user account in EUROPA domain and configure delegation for this:
EUROPE\application_sandbox
2. Register SPN for this account:
setspn -A HTTP/application-sandbox.russia.domain.net EUROPE\application_sandbox
setspn -A HTTP/application-sandbox EUROPE\application_sandbox
3. After i verified registered SPN for this account:
setspn.exe -L EUROPE\application_sandbox
Registered ServicePrincipalNames for CN=kxxb999,OU=Users,DC=europe,DC=domain,DC=net:
HTTP/application-sandbox
HTTP/application-sandbox.russia.domain.net
3. After i generate a keytab file:
ktpass /princ HTTP/application-sandbox.russia.domain.net:@RUSSIA.DOMAIN.NET /ptype krb5_nt_principal /crypto rc4-hmac-nt /mapuser EUROPE\application_sandbox /out application_sandbox.keytab -kvno 0 /pass Pa$$w0rd
4. Properties of account looks like the following:
Get-ADUser -Identity appication_sandbox -Properties CN, ServicePrincipalNames, UserPrincipalName
CN : kxxb999
DistinguishedName : CN=kxxb999,OU=Users,DC=europe,DC=domain,DC=net
Enabled : True
GivenName :
Name : kxxb999
ObjectClass : user
SamAccountName : application_sandbox
ServicePrincipalNames : {HTTP/application-sandbox, HTTP/application-sandbox.russia.domain.net}
Surname : application_sandbox
UserPrincipalName : HTTP/[email protected]
4.Note that CN and User logon name are different. SPN registered for DNS record.
There are no computer in domain with name application-sandbox.russia.domain.net. this is a DNS record for application.
5. Then i copy keytab file to Linux machine, configure krb5.conf file and trying to get TGT for registered principal name.
krb5.conf file:
[libdefaults]
default_realm = EUROPE.DOMAIN.NET
dns_lookup_realm = false
dns_lookup_kdc = false
default_tkt_enctypes = rc4-hmac
default_tgs_enctypes = rc4-hmac
[realms]
RUSSIA.DOMAIN.NET = {
kdc = dc01.russia.domain.net
admin_server = dc01.russia.domain.net
default_domain = russia.domain.net
EUROPE.DOMAIN.NET = {
kdc = dc01.europe.domain.net
admin_server = dc01.europe.domain.net
default_domain = europe.domain.net
[domain_realm]
europe.domain.net = EUROPE.DOMAIN.NET
.europe.domain.net = EUROPE.DOMAIN.NET
russia.domain.net = RUSSIA.DOMAIN.NET
.russia.domain.net = RUSSIA.DOMAIN.NET
[appdefaults]
autologin = true
forward = true
forwardable = true
encrypt = true
Then i verified created keytab file:
klist -e -k -t application_sandbox.keytab
Keytab name: FILE:application_sandbox.keytab
KVNO Timestamp Principal
0 01/01/70 01:00:00 HTTP/[email protected] (arcfour-hmac)
And trying to get TGT ticket:
kinit -V -k -t application_sandbox.keytab HTTP/[email protected]
Using default cache: /tmp/krb5cc_0
Using principal: HTTP/[email protected]
Using keytab: application_sandbox.keytab
kinit: Client not found in Kerberos database while getting initial credentials
But if i use SamAccountName name with kinit commant then i can aquire TGT ticket:
[root@localhost security]# kinit application_sandbox
Password for [email protected]:
[root@localhost security]# klist
Ticket cache: FILE:/tmp/krb5cc_0
Default principal: [email protected]
Valid starting Expires Service principal
06/30/14 16:37:41 07/01/14 02:37:38 krbtgt/[email protected]
renew until 07/01/14 16:37:41
I'm in trouble. can anyone faced this problem?
Thank you

Hi all,
according to Amy answer I thought, how user principal could not be found in Kerberos database, e.g AD domain.
My HTTP service works in RUSSIA domain, but user principal created in EUROPE domain.
Next, i have checked my ktpass command:
ktpass /princ HTTP/[email protected] /ptype krb5_nt_principal /crypto rc4-hmac-nt /mapuser EUROPE\application_sandbox /out application_sandbox.keytab -kvno 0 /pass
Pa$$w0rd
especially the following parameters:
/princ HTTP/[email protected]
/mapuser EUROPE\application_sandbox
When generating keytab it changes userlogon name to HTTP/application-sandbox.russia.domain.net and set domain domain to RUSSIA.DOMAIN.NET
But no user principal with name application_sandbox in RUSSIA.DOMAIN.NET domain (e.g. Kerberos realm)
So solution is change RUSSIA.DOMAIN.NET to EUROPE.DOMAIN.NAME in ktpass command.
After that i am able to get TGT and authenticate in domain.

Parent key 1393696 not found when adding child 1393727.

By posting, I received this :
An error in the system has occurred. Please contact the system administrator if the problem persists.
type: java.lang.IllegalArgumentException
java.lang.IllegalArgumentException: Parent key 1393696 not found when adding child 1393726.
at com.jivesoftware.util.LongTree.addChild(LongTree.java:99)
at com.jivesoftware.forum.database.DbTreeWalker.addChild(DbTreeWalker.java:233)
at com.jivesoftware.forum.database.DbForumThread.addMessage(DbForumThread.java:617)
at com.jivesoftware.forum.proxy.ForumThreadProxy.addMessage(ForumThreadProxy.java:145)
at com.jivesoftware.forum.action.PostAction.createMessage(PostAction.java:1083)
at com.jivesoftware.forum.action.PostAction.execute(PostAction.java:946)
at com.jivesoftware.forum.action.PostAction.doPost(PostAction.java:666)
at sun.reflect.GeneratedMethodAccessor110.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.opensymphony.xwork.DefaultActionInvocation.invokeAction(DefaultActionInvocation.java:300)
at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:166)
at com.opensymphony.xwork.interceptor.AroundInterceptor.intercept(AroundInterceptor.java:35)
at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:164)
at com.opensymphony.xwork.interceptor.AroundInterceptor.intercept(AroundInterceptor.java:35)
at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:164)
at com.opensymphony.xwork.interceptor.AroundInterceptor.intercept(AroundInterceptor.java:35)
at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:164)
at com.jivesoftware.forum.action.JiveExceptionInterceptor.intercept(JiveExceptionInterceptor.java:63)
at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:164)
at com.jivesoftware.base.action.JiveObjectLoaderInterceptor.intercept(JiveObjectLoaderInterceptor.java:56)
at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:164)
at com.opensymphony.xwork.interceptor.AroundInterceptor.intercept(AroundInterceptor.java:35)
at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:164)
at oracle.wocapps.forum.action.OracleLocaleInterceptor.intercept(OracleLocaleInterceptor.java:74)
at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:164)
at com.opensymphony.xwork.interceptor.AroundInterceptor.intercept(AroundInterceptor.java:35)
at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:164)
at com.opensymphony.webwork.interceptor.FileUploadInterceptor.intercept(FileUploadInterceptor.java:71)
at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:164)
at com.opensymphony.xwork.interceptor.AroundInterceptor.intercept(AroundInterceptor.java:35)
at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:164)
at com.opensymphony.xwork.interceptor.AroundInterceptor.intercept(AroundInterceptor.java:35)
at com.opensymphony.xwork.DefaultActionInvocation.invoke(DefaultActionInvocation.java:164)
at com.opensymphony.xwork.DefaultActionProxy.execute(DefaultActionProxy.java:116)
at com.opensymphony.webwork.dispatcher.ServletDispatcher.serviceAction(ServletDispatcher.java:272)
at com.jivesoftware.base.util.JiveWebWorkServlet.service(JiveWebWorkServlet.java:62)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at com.jivesoftware.util.SetResponseCharacterEncodingFilter.doFilter(SetResponseCharacterEncodingFilter.java:53)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at com.opensymphony.module.sitemesh.filter.PageFilter.parsePage(PageFilter.java:118)
at com.opensymphony.module.sitemesh.filter.PageFilter.doFilter(PageFilter.java:52)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at com.jivesoftware.util.SetRequestCharacterEncodingFilter.doFilter(SetRequestCharacterEncodingFilter.java:48)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)

Check the adapter that is attached to the child table , compile it again and try adding .
BTW which connector you are using and paste the error trace from log files
Thanks
Suren

Table "StoredProcedure" not found when changing Database location in VS 2005.

Similar Messages

Maybe you are looking for