Custom Table Entry not in Sync between Different Environment

Hi All,
we have different environment like Dev System, Quality system, performance testing system etc... these are all environment customs table entry not in syn .. Table entry should be syn. How to make it syn all the entry between all environment without do any manual work. Kindly help on this.
Thanks

Hello Mohammed,
It depends on what type of tables you are referring to. If you have a table of type 'Customizing', you have to transport your table entries across different environments and they will be in Sync.
If you are referring to tables of type 'Master Data', they have to be maintained in all environments.
Table of type 'Transaction Data' by default have different records based on your day to day transactions.
You cannot have all custom tables with same data in all environments. Hope this helps.
Rgds,
Vijay.

Similar Messages

  • Custom table entry if transaction fails

    hey ppl,
    One doubt. I am using a exit in sales order and the requirement is that once the exit is triggered,few values must be updated on the custom table that i have created. My question s that, i am able to modify my custom table but if for some reason ,after my exit if the transaction fails :
    1. would the custom table entry be reversed back automatically?
    2. Else, is it our responsibility to reverse the entry in the custom table?If yes, can you please guide me how to do it?
    Thanks in advance.

    1. would the custom table entry be reversed back automatically? Can't be sure on this. the entry will be updated to table once the Current LUW is updated.
    2. Else, is it our responsibility to reverse the entry in the custom table?If yes, can you please guide me how to do it?
    Yes. If entry is there you wll require to DELETE it otherwise you can just to ROLLBACK WORK.

  • Reagrding transporting of custom table entries from D to Q.

    Hi,
    I am trying to transport couple of entries which I did using table maintainence in SM30. But when I go to Maintain option -> Table View -> Transport, I see the Transport option inactive.
    Can someone tell me how to activate that option or how to move custom table entries from one system to other ?
    Regards,
    Rajesh.

    Hi rajesh,
    1. For this purpose, the delivery class of that table should be C = Customizing.
      (at present it would be A =  Application)
    2. This is done in se11 transaction.
    3. After changing the delivery class, we have to RE-GENERATE
       the table maintenance.
    4. Then, whenever we do SM30, it will automatically ask for a request number.
    regards,
    amit m.

  • How to sync to different environment (Devlopment & Test)

    Hi,
    I would like to know more about, how to sync two different environment (includes metadata changes and data if applicable).
    using LCM of version 11.1.2.1 (for Planning, Essbase and FR).
    Regards
    Kumar

    There are so many posts and blogs on LCM, a little research and I am sure you will be able to get to grips with using LCM, for example - http://www.oracle.com/webfolder/technetwork/tutorials/obe/hyp/PLN11.1.2_LCM/index.html
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How to find out the changes made to the customized table entries

    Hi Team
    i want to know the changes made to the customized table. i have a 'Z' table in my production system, in that table i would like to know whether any table entry is deleted or not. if at all there is any deletion happened, i want to know who had done it.
    So i request you to please let me know the procedure for the same.
    Thanks
    Raj

    Hi Nagaraju,
                       Go to Table Maintenance (SM30)- Display mode-- Utilities-- change Logs. Give the Date range. before giving the date range click on display status , this will show you If the display is active or not. Kindly please let me know If you need any more information on this.
    Regards
    Ram Pedarla

  • SM30 table entries not to be transported

    Hi,
    I am trying to maintain entires using SM30 transaction for a Z custom table. Every time I create a new entry and save it a transport request is asked for.
    Is it possible that the transport request not be asked?
    Because entries a maintained by end user in each environment seperately.
    Thanks in Advance,
    Rohan.

    Hi,
    In the table maintenace genartor,
    Select the radio Button , NO RECORDING ROUTINES.
    This will serve the purpose.
    Revrt back if any issues,
    Regards,
    Naveen

  • Transport of a Custom Table Entries

    Hi Forum,
    I need some information as to how do we transport changes made to a custom table. We have created new entries in the Table and we need to transport those entries to QA. System did not ask for a TR No while we were creating the entries. Is there a way we can achieve it?
    Any Inout on this would be of great help. And Rewards gurranted.
    Thanks and Regards,
    - Prasenjit

    Hi
      Try to change the Delivery Class to C in se11, Delivery and Maintenance tab.
    Other option:
    go to SE10 and create request.
    in that give,
    Program ID : R3TR
    Obj : TABU
    Object name : you table name.
    double click on the table name and give key filed values. If you want to transport entire table entries
    give * .
    Regards.
    Manuel

  • Custom table entries suddenly deleted

    We have a custom table in our production system that had 14000+ entries last Friday.  Now, they're all gone.  Production system is not modifiable, no one has authorization to SE16 or SM30 for deletions.  No program that deletes the data has been run in this timeframe (based on ST03 data).   What other ways could this data have been deleted?  We're puzzled.

    Kirsten,
    you may want to check two things:
    1.) Is there a delete or clean-up report for your custom table (check via the where-used list)? If yes it is very likely that someone ran it...
    2.) It could also be that something happened directly on DB level. The admin accidentally dropped the wrong table, etc. This is not very likely but I have seen that happening before. Maybe the DB admins can even tell you at which time the table got deleted...
    Tim

  • Custom table entries transportable / maintainable in production environment

    Hi,
    I have a custom table with table maintenance generator (automatic transport of table entries). I would also like to maintain the table entires in the production environment (i.e. using SM30 transaction, rather than transporting the entries from Quality). I hope there is a cofiguration to do this.
    Could any one help me on this.
    Thanks in advance.

    Adding to what others have suggested, it is not advisable to give SM30 access to your users. Its better to create a parameter transaction for the maintainance dialog and give the user access to that transaction. Other way of restricting the access is using authorization group selection while creation of maintainance dialog (&NC& will give access to every one). Check the below link to see how to create a parameter transaction for sm30.
    [Parameter transaction for sm30|http://www.divulgesap.com/blog.php?p=MTg=]
    Cheers,
    Ravikiran

  • Table entries not getting displayed in desired format

    Hi All,
    In my adobe layout I created a table . I used data format Align Right and align middle for the table entries. In the Output  some entries of the table are not displaying in align right and align middle.
    Output:In the below output the first row data is not in desired format .
    Thanks in Advance,
    Suneel.Uggina.

    That is pretty to much information to help you.
    You need to share your technical setting. How did you create the table? Subforms, Table-assistent... what are the values in? Format, what happens when you also pass more than 1 digit to the numbers in the first row, does it show up correct?
    So please share more details and explain exact what you have tried to fix the issue. The community is able to help you, but not meant to suggest enaything you could have done.
    ~Florian

  • Add a new field in custom table but not show on SM30

    I add a new field in a custom table, did Table Maintenance generator and SE93.  But that field did not show on SM30 screen.  How to make it show on the SM30?
    Thanks
    Helen

    Hi,
    I think its the Problem with TMG.
    Go to TMG screen delete the old TMG and regenerate the new TMG
    Hope it helps
    regards
    Prasanth

  • Customized table could not maintain in PRD

    Hi all,
    I have created a table ZTABCUST with table maintenance as below.
    Delivery Class : C (Customizing table, maintenance only by cust., not SAP import)
    Data Browser/Table View Maint. :  X Display/Maintenance Allowed
    Table Maintenance Dialog
    Authorization Group : &NC&  (w/o auth. group)
    Authorization object : S_TABU_DIS
    Function Group : ZGAA004
    Package : ZSD
    Maintenance type : one step
    Maint.Sceen No :  Overview screen : 1
    Dialog Data transport Details
    Recording routine : Standard recording routine
    Compare Flag : Automatically Adjustable
    I have transported this into Production.
    But when i try to update my customized table in PRD using SM30/SM31, the system show message
    "Client 300 has status 'not modifiable' ".
    and I couldnt update my customized table.
    How and what should I do in order to make my customized table to be modifiable in Production?
    I need this to be solved urgently.Points rewarded.

    Please do the following.
    goto"Delivery and maintaince" tab. Then make the Data browser/Table view maint.  as
    X Display/ Maintenance allowed. then activate it . then create the table maintenance generator again..

  • How to get customizing table entries in to dropdown list

    Hello All,
    I have field in my screen from customizing table. How do i get values in this field when the presses drop down button?
    I know that we can do it by entering fixed values to that field and also when we create a check table we will get values.
    Is there any other way to get the values?
    Can any one help me.
    Regards,
    Lisa.

    Hi,
    I have 2 solutions for your post, one go for DROP DOWN BOX if you are having fixed input values.
    And two go for search help if you want multiple entries has to be displayed in your field form your customized table.
    If you want procedure decide your option and revert me i will send you.
    Good Luck
    Thks

  • Unlock custom table entries after user exits using /n

    Hello,
    I want to lock a record in a custom table at the beginning when users execute a transaction. Users do various activities and save the change then the lock can be released. My issue here is after I lock when the user execute the transaction, if the user does not save or come out using exit keys, for example press /n or just close the session, I need to still unlock the record. Could any one pls suggest what is the best approach. How does sap handles when we use VA02 and just close the session?
    Many thanks
    Ramesh

    Ramesh,
    You need to check for the other actions besides save.  Perform the same unlock for other action as you currently do for a save. 
    If SAVE.
    unlock.
    Else
    unlock
    endif.
    Bruce

  • Transporting Custom table entries

    Dear Experts,
    I have to add some values to the fields in my customizing table(Delivery class C).
    Iam doing it through SM30.
    I dont want to add any new entries but change the values in some fields.Can I make these changes and put it under a change Request and transport it to the Q and productive systems so that only these changes are made there and the other rows remains unaffected...
    The reason why Iam asking this when I try to edit the table with SM30,I get a message
    "Individual entries cannot be put in ChangeRequest"
    Regards
    K
    Edited by: Kohinoor72 on Jan 4, 2012 3:57 PM

    Make the table contents transportable by creating a "table maintenance generator" in SE11 under Utilities -> Table maintenance generator.
    In that screen for the section "Dialog data transport Details" the "Standard Recording Routine" option should be selected.
    Then only will the system ask for Transport request when entering data through the generated maintenance view in SM30.
    If you already generated table maintenance and now setting the Standard Recording Routine attribute, you need to regenerate the table maintenance by clicking the change button and selecting all check boxes. Remember that if you created any custom events / screen modification, they need to be put back after regeneration.
    Also change the "delivery class' in the SE11 table attributes to 'C' - Customizing table

Maybe you are looking for