Database upgrade error

Hi Hussein,
I am upgrading database in test environment from 9.2.0.6 to 9.2.0.8. Which is on applicaitons 11i. and O/S is AIX 5.3
I did not run
#slibclean (section 5.10 in readme of 4547809) because prod and test are on same machine. And to run this no oracle instances should be up. (Stupid me i did not care). Now i am encoutering errors like "file cannot move or read file (coz they are locked by lib files)". And i skipped for some files which i should'nt have done.
Now i have got two doubts
1). If i click cancel now(the upgrade which is asking questions like retry,ignore,cancel), do i need to restore backup from before starting upgrade.
2). If i run slibclean (after shutting prod down) will it make my production never usable.
Regards
Taher

Hi,
DOC>#######################################################################
DOC>#######################################################################
DOC> The following statement may cause an
DOC> ORA-29554: unhandled Java out of memory condition
DOC> error.
DOC> If so, this is because there is insufficient system tablespace,
DOC> shared or java pool size, or some other resource value is too small.
DOC> An additional message describing the problem will be output by
DOC> the statement.
DOC>#######################################################################
DOC>#######################################################################
DOC>*/
PL/SQL procedure successfully completed.
Hangs here. But as per doc ORA-29554 during 'Postinstallation Tasks' of patch set installation. [ID 453751.1]
This is not an error so skipped.
My test db is not in archive log mode.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
SQL> archive log list;
Database log mode No Archive Mode
Automatic archival Disabled
Archive destination /test/oracle/testdb/9.2.0/dbs/arch
Oldest online log sequence 902
Current log sequence 904
No errors in the alert log file. But the last message was
Completed: ALTER DATABASE OPEN MIGRATE
Sat Mar 27 23:03:39 2010
Beginning log switch checkpoint up to RBA [0x387.2.10], SCN: 0x0000.3cb49b84
Thread 1 advanced to log sequence 903
Current log# 2 seq# 903 mem# 0: /test/oracle/testdata/log02a.dbf
Current log# 2 seq# 903 mem# 1: /test/oracle/testdata/log02b.dbf
Sat Mar 27 23:05:16 2010
Completed checkpoint up to RBA [0x387.2.10], SCN: 0x0000.3cb49b84
Sat Mar 27 23:07:52 2010
Beginning log switch checkpoint up to RBA [0x388.2.10], SCN: 0x0000.3cb4f70a
Thread 1 advanced to log sequence 904
Current log# 3 seq# 904 mem# 0: /test/oracle/testdata/log03a.dbf
Current log# 3 seq# 904 mem# 1: /test/oracle/testdata/log03b.dbf
Sat Mar 27 23:10:04 2010
Completed checkpoint up to RBA [0x388.2.10], SCN: 0x0000.3cb4f70a
Thenx for the documents. But i already increased java_pool_size from 70MB to 150mb.
Regards
Taher

Similar Messages

  • Unexpected database connector error when upgraded to the JRC 12.2.208

    Hi,
         My reports were working fine when using the CR viewers 11 SDK. In order to use print from the server functionality, I upgraded to JRC 12.2.208. Since then I am getting the following exception. Please help. Thanks!
    Line: -
    Exception Trace =
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Unexpected database connector error---- Error code:-2147467259 Error code name:failed
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:2285)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:2305)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:737)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:167)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:529)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:527)
         at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(SourceFile:102)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(SourceFile:525)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(SourceFile:424)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(SourceFile:352)
         at com.businessobjects.sdk.erom.jrc.a.a(SourceFile:54)
         at com.businessobjects.sdk.erom.jrc.a.execute(SourceFile:67)
         at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(SourceFile:716)
         at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(SourceFile:125)
         at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:537)
    Line: -
    CrystalReport logs:
    2010-10-07 09:15:18,390 [http-80-1] DEBUG com.crystaldecisions.reports.dataengine.DataEngineCommand.VerifyDatabaseCommand  - VerifyDatabaseCommand,0,Enter CreateCommand,<document=ReportDocument:<report=main><reportPath=C:\ICTS-10-6\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\ICTSWeb\reports\rptICERejection.rpt>>;<isFirstVerify=false>;
    2010-10-07 09:15:18,390 [http-80-1] DEBUG com.crystaldecisions.reports.dataengine.DataEngineCommand.VerifyDatabaseCommand  - VerifyDatabaseCommand,30823955,Exit CreateCommand,<document=ReportDocument:<report=main><reportPath=C:\ICTS-10-6\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\ICTSWeb\reports\rptICERejection.rpt>>;
    2010-10-07 09:15:18,390 [http-80-1] DEBUG com.crystaldecisions.reports.common.commandmanager  - command SETUP: VerifyDatabaseCommand
    2010-10-07 09:15:18,390 [http-80-1] DEBUG com.crystaldecisions.reports.common.commandmanager  - command PERFORM: VerifyDatabaseCommand
    2010-10-07 09:15:18,390 [http-80-1] DEBUG com.crystaldecisions.reports.dataengine.DataEngineCommand.VerifyDatabaseCommand  - VerifyDatabaseCommand,30823955,Enter perform,<document=ReportDocument:<report=main><reportPath=C:\ICTS-10-6\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\ICTSWeb\reports\rptICERejection.rpt>>;
    2010-10-07 09:15:18,390 [http-80-1] INFO  com.crystaldecisions.reports.dataengine.DataEngineCommand.VerifyDatabaseCommand  - Verifying database
    2010-10-07 09:15:18,390 [http-80-1] INFO  com.crystaldecisions.reports.reportdefinition.ReportCommand.CheckDatabaseCommand  - CheckDatabaseCommand,0,Enter CreateCommand,<document=ReportDocument:<report=main><reportPath=C:\ICTS-10-6\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\ICTSWeb\reports\rptICERejection.rpt>>;
    2010-10-07 09:15:18,390 [http-80-1] INFO  com.crystaldecisions.reports.reportdefinition.ReportCommand.CheckDatabaseCommand  - CheckDatabaseCommand,5205942,Exit CreateCommand,<document=ReportDocument:<report=main><reportPath=C:\ICTS-10-6\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\ICTSWeb\reports\rptICERejection.rpt>>;
    2010-10-07 09:15:18,390 [http-80-1] DEBUG com.crystaldecisions.reports.common.commandmanager  - command SETUP: CheckDatabaseCommand
    2010-10-07 09:15:18,406 [http-80-1] DEBUG com.crystaldecisions.reports.common.commandmanager  - command PERFORM: CheckDatabaseCommand
    2010-10-07 09:15:18,406 [http-80-1] INFO  com.crystaldecisions.reports.reportdefinition.ReportCommand.CheckDatabaseCommand  - CheckDatabaseCommand,5205942,Enter perform,<document=ReportDocument:<report=main><reportPath=C:\ICTS-10-6\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\ICTSWeb\reports\rptICERejection.rpt>>;
    2010-10-07 09:15:18,406 [http-80-1] INFO  com.crystaldecisions.reports.queryengine  - Connection logon:PreQEServerName=s(DOCSQLDEV01);Provider=s(SQLOLEDB.1);Integrated Security=s(SSPI);Initial Catalog=s(ICTS_DEV);Data Source=s(DOCSQLDEV01);Use Procedure for Prepare=s(1);Auto Translate=s(True);Packet Size=s(4096);Workstation ID=s(DOCCAPWKS708);PreQEServerType=s(Active Data (ADO));Database DLL=s(crdb_javabeans.dll);Java ResultSet=
    2010-10-07 09:15:18,406 [http-80-1] INFO  com.crystaldecisions.reports.queryengine  - Connection logon successfully
    2010-10-07 09:15:18,437 [http-80-1] INFO  com.crystaldecisions.reports.queryengine  - Rowset restart: moveToStart true
    2010-10-07 09:15:18,437 [http-80-1] INFO  com.crystaldecisions.reports.queryengine  - Rowset execute
    2010-10-07 09:15:18,437 [http-80-1] DEBUG com.crystaldecisions.reports.common.commandmanager  - command SETUP: NotUndoableCommand
    2010-10-07 09:15:18,437 [http-80-1] DEBUG com.crystaldecisions.reports.common.commandmanager  - command PERFORM: NotUndoableCommand
    2010-10-07 09:15:18,437 [http-80-1] DEBUG com.crystaldecisions.reports.common.commandmanager  - -- command is NOT UNDOABLE -> purge undo stack
    2010-10-07 09:15:18,453 [http-80-1] DEBUG com.crystaldecisions.reports.common.commandmanager  - command SETUP: NotUndoableCommand
    2010-10-07 09:15:18,453 [http-80-1] DEBUG com.crystaldecisions.reports.common.commandmanager  - command PERFORM: NotUndoableCommand
    2010-10-07 09:15:18,453 [http-80-1] DEBUG com.crystaldecisions.reports.common.commandmanager  - -- command is NOT UNDOABLE -> purge undo stack
         at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.if(SourceFile:605)
         at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.a(SourceFile:1688)
         at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.new(SourceFile:2650)
         at com.crystaldecisions.sdk.occa.report.application.b9.onDataSourceChanged(SourceFile:301)
         at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(SourceFile:962)
         at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(SourceFile:2834)
         at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setDataSource(SourceFile:2557)
         at com.crystaldecisions.reports.sdk.DatabaseController.setDataSource(SourceFile:87)

    I find in the SAP notes that this is a reported bug in the JRC application. 
    SAP Note 1416845 - JRC application throws "Unexpected database connector" error
    http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap%28bd1lbizjptawmq==%29/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433313336333833343335%7D.do
    My question is - Does anyone know when is this bug scheduled to be fixed and released?
    Thanks,
    Travis

  • Unexpected database connector error when upgraded to the JRC 12.2.209

    Hi all,
    my reports were working fine when using the Java Reporting component version 11.8.4.1094 within a web application.
    I upgraded to JRC version 12.2.209.1094 Since then I am getting the following exception:
    16:44:33,546 ERROR [JRCCommunicationAdapter]  detected an exception: Unexpected database connector error
         at com.crystaldecisions.reports.datafoundation.DFQuery.for(SourceFile:632)
         at com.crystaldecisions.reports.datalayer.a.do(SourceFile:1621)
         at com.crystaldecisions.reports.datalayer.a.a(SourceFile:1404)
         at com.crystaldecisions.reports.dataengine.m.b(SourceFile:334)
         at com.crystaldecisions.reports.dataengine.j.b(SourceFile:515)
         at com.crystaldecisions.reports.dataengine.m.o(SourceFile:408)
         at com.crystaldecisions.reports.dataengine.m.a(SourceFile:173)
         at com.crystaldecisions.reports.dataengine.ContextNode.a(SourceFile:114)
         at com.crystaldecisions.reports.dataengine.ContextNode.a(SourceFile:95)
         at com.crystaldecisions.reports.dataengine.j.case(SourceFile:1080)
         at com.crystaldecisions.reports.dataengine.h.<init>(SourceFile:108)
         at com.crystaldecisions.reports.dataengine.DataContext.a(SourceFile:254)
         at com.crystaldecisions.reports.dataengine.DataProcessor2.a(SourceFile:4660)
         at com.crystaldecisions.reports.dataengine.DataProcessor2.a(SourceFile:4574)
         at com.crystaldecisions.reports.dataengine.DataProcessor2.new(SourceFile:2652)
         at com.crystaldecisions.reports.dataengine.DataProcessor2.byte(SourceFile:2610)
         at com.crystaldecisions.reports.dataengine.DataProcessor2.try(SourceFile:2282)
         at com.crystaldecisions.reports.dataengine.DataProcessor2.int(SourceFile:2442)
         at com.crystaldecisions.reports.dataengine.DataProcessor2.I(SourceFile:1013)
         at com.crystaldecisions.reports.formatter.formatter.objectformatter.ObjectFormatter.fo(SourceFile:526)
         at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.if(SourceFile:613)
         at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.a(SourceFile:578)
         at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.X(SourceFile:387)
         at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.moveToPageN(SourceFile:339)
         at com.crystaldecisions.reports.formatter.export2.a.a(SourceFile:78)
         at com.crystaldecisions.reports.formatter.export2.a.a(SourceFile:247)
         at com.crystaldecisions.reports.formatter.export2.ExportSupervisorEx.if(SourceFile:642)
         at com.crystaldecisions.reports.formatter.export2.ExportSupervisorEx.a(SourceFile:586)
         at com.businessobjects.reports.sdk.requesthandler.ReportViewingRequestHandler.a(SourceFile:636)
         at com.businessobjects.reports.sdk.requesthandler.ReportViewingRequestHandler.int(SourceFile:672)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(SourceFile:1944)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:661)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:167)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:529)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:527)
         at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(SourceFile:102)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(SourceFile:525)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(SourceFile:424)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(SourceFile:352)
         at com.businessobjects.sdk.erom.jrc.a.a(SourceFile:54)
         at com.businessobjects.sdk.erom.jrc.a.execute(SourceFile:67)
         at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(SourceFile:716)
         at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(SourceFile:125)
         at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:537)
         at com.crystaldecisions.sdk.occa.report.application.ds.a(SourceFile:186)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(SourceFile:1558)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(SourceFile:337)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(SourceFile:286)
         at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(SourceFile:209)
         at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(SourceFile:249)
         at com.businessobjects.report.web.event.bh.a(SourceFile:158)
         at com.businessobjects.report.web.event.o.a(SourceFile:146)
         at com.businessobjects.report.web.event.bw.broadcast(SourceFile:93)
         at com.businessobjects.report.web.event.am.a(SourceFile:53)
         at com.businessobjects.report.web.a.t.if(SourceFile:2104)
         at com.businessobjects.report.web.e.a(SourceFile:300)
         at com.businessobjects.report.web.e.a(SourceFile:202)
         at com.businessobjects.report.web.e.a(SourceFile:135)
         at com.crystaldecisions.report.web.ServerControl.a(SourceFile:607)
         at com.crystaldecisions.report.web.viewer.ReportExportControl.a(SourceFile:124)
         at com.crystaldecisions.report.web.ServerControl.a(SourceFile:131)
         at com.crystaldecisions.report.web.ServerControl.getHtmlContent(SourceFile:119)
         at it.xxxx.xxx.servlet.xxxx.xxxx.xxxxx(xxxxx.java:338)
    16:44:33,656 ERROR [STDERR] Caused by: java.sql.SQLException: ORA-00936: missing expression
    16:44:33,656 ERROR [STDERR]      at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:74)
    16:44:33,656 ERROR [STDERR]      at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:131)
    16:44:33,656 ERROR [STDERR]      at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:204)
    16:44:33,656 ERROR [STDERR]      at oracle.jdbc.driver.T2CConnection.checkError(T2CConnection.java:693)
    16:44:33,656 ERROR [STDERR]      at oracle.jdbc.driver.T2CConnection.checkError(T2CConnection.java:617)
    16:44:33,656 ERROR [STDERR]      at oracle.jdbc.driver.T2CStatement.executeForDescribe(T2CStatement.java:766)
    16:44:33,656 ERROR [STDERR]      at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1077)
    16:44:33,656 ERROR [STDERR]      at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1186)
    16:44:33,656 ERROR [STDERR]      at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:1770)
    16:44:33,656 ERROR [STDERR]      at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:1739)
    16:44:33,656 ERROR [STDERR]      at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:299)
    16:44:33,656 ERROR [STDERR]      at org.jboss.resource.adapter.jdbc.WrappedStatement.execute(WrappedStatement.java:91)
    16:44:33,656 ERROR [STDERR]      ... 99 more
    From the Eclipse's console I recovered the query being executed and I have noticed that in the query missing one parameter and some parameters are set up incorrectly to zero. With the old version the parameters were passed correctly to the query and the reports work fine.
    Please help. Thanks!
    Edited by: Francesco83 on Jan 13, 2011 5:27 PM
    Edited by: Francesco83 on Jan 13, 2011 5:29 PM
    Edited by: Francesco83 on Jan 14, 2011 12:57 PM

    I find in the SAP notes that this is a reported bug in the JRC application. 
    SAP Note 1416845 - JRC application throws "Unexpected database connector" error
    http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap%28bd1lbizjptawmq==%29/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433313336333833343335%7D.do
    My question is - Does anyone know when is this bug scheduled to be fixed and released?
    Thanks,
    Travis

  • Database connecting error after kernel upgrade

    Hi Gurus
    I am tring to upgrade my system kernel from 144 to 179, the system based on AIX 6.1 and DB2 B9.5.2,
    After upgrading kernel SAP is not starting and I found database connection error because which Database is not activated. The startdb command completed successfully. I found I/O error while trying to make db connection.
    I am also tring make SAP up by using old kernel (backup) but getting same error for backup kernel also. Now my system is totaly down.
    So please help me out if you have any idea for this error in db2 database. The start db logs are as given below.
    Wed Jan 21 08:56:07 GMT+05:30 2009
    LOGFILE FOR STARTING DB6 (DB2 UDB)
    Wed Jan 21 08:56:07 GMT+05:30 2009
    checking required environment variables
    DB2INSTANCE  is >db2d11<
    INSTHOME     is >/db2/db2d11<
    DB2DBDFT     is >D11<
    Wed Jan 21 08:56:07 GMT+05:30 2009
    starting database manager
    01/21/2009 08:56:07     0   0   SQL1026N  The database manager is already active.
    SQL1026N  The database manager is already active.
    Database Manager started
    SQL1036C  An I/O error occurred while accessing the database.  SQLSTATE=58030
    Activate database failed
    Wed Jan 21 08:56:08 GMT+05:30 2009
    R3trans connect to the database
    R3trans check finished with return code: 12
    R3trans connect failed
    Notify your SAP/database administrator
    Wed Jan 21 08:56:08 GMT+05:30 2009
    /usr/sap/D11/SYS/exe/run/startdb: Terminating with error code 2
    Please help me out.
    Regards,
    Jayesh.

    Hi Jayesh,
    from your description I would guess that the IO error is not related to the kernel change at all.
    Please have a look at db2diag.log for the real cause of the problem.
    You should be able to reproduce the error with
    db2 activate database <dbname>
    Regards
                   Frank

  • Database upgrade to 10.2.0.4 error - oracle RAC status showing Invalid

    Hi all,
    I am getting this error during database upgrade to 10.2.0.4 error - "oracle real application clusters status invalid. "
    I am getting the above error after running catupgrd
    and checking the status SELECT COMP_NAME, VERSION, STATUS FROM SYS.DBA_REGISTRY;
    This is not a RAC database and this is the only components which shows INVALID.
    Is it normal? Please advice me the action/steps to take to rectify ASAP as it is urgent ... Thanks & Regards, Deepak Gupta

    Probably database was 9i and it was upgraded to 10g?
    It can be normal situation.
    Please check metalink note 312071.1
    If database is not rac, then simply ignore this status as workaround is quite difficult and definetely it's not worth to go for it.

  • Database Connection Error:BAPI Error #0

    I have a problem when I preview a report in Crystal Reports 2008 using BW MDX Query I had recieved the following messages:
    1.Failed to retrieve data from database
    and then when I click ok
    2.Database Connection Error:BAPI Error #0
    Error occurred  when starting the parser:timeout during allocate / CPIC-CALL'ThSAPCMRCV'
    I copied the query of crystal report and I execute it inside the transaction of mdxtest
    SELECT  NON EMPTY EXCEPT([0CALMONTH].MEMBERS, {[0CALMONTH].[All]}) ON ROWS FROM [USD_SD_C0/RPT_1] SAP VARIABLES [!V000001] INCLUDING [0CALMONTH].[200401]
    I found the debugger had stopped in the line Break when I click on F8
    I recieve the following error
    Error occurred when starting the parser: timeout
    during allocate / CPIC-CALL: 'ThSAPCMRCV'
    Please anybody can help me

    Dear Ingo
    I had read this note
    I applied the following:
    1.I didn't found the lrfc32.dll in the windows/system32 in my BW server so I asked my basis administrator to upgrade the kernel
    2.after this step I didn't find it again so I had copied the file from the new kernel and copied it to system32 and sysWow
    3.I register successfuly the lrfc32.dll using the commanf regsvr c:/windows/system32/lfrc32.dll
    (note: this step didn't succeed until I had installed SAP GUI in BW server because as I observed that there is a need for C++ compiler which is installed by default when you install GUI)
    after all of this I cannot run any crystal report based on any BW query
    So Please anyboday can help

  • Unexpected database connector error---- Error code:-2147467259

    Hi, I am using Crystal Report for Eclipse 12.2.208).
    My rpt file contains a command with a simple sql query
    In eclipse I used this rpt and generated the Jsp file to export the report to Pdf format
    But exception is thrown in the following line of Jsp
    //Push the Java ResultSet into the report (this will then be the datasource of the report)
    CRJavaHelper.passResultSet(clientDoc, fetchResultSet(driverName, connectStr, userName, password, query), tableAlias, "");
    CRJavaHelper.java
    clientDoc.getDatabaseController().setDataSource(rs, tableAlias,tableAlias);
    While replacing the result set I am getting the following error.... Please help me on this.
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Unexpected database connector error---- Error code:-2147467259 Error code name:failed at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:2285) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:2305) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:737) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:167) at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:529) at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:527) at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(SourceFile:102) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(SourceFile:525) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(SourceFile:424) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(SourceFile:352) at com.businessobjects.sdk.erom.jrc.a.a(SourceFile:54) at com.businessobjects.sdk.erom.jrc.a.execute(SourceFile:67) at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(SourceFile:716) at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(SourceFile:125) at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:537) at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.if(SourceFile:605) at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.a(SourceFile:1688) at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.new(SourceFile:2650) at com.crystaldecisions.sdk.occa.report.application.b9.onDataSourceChanged(SourceFile:301) at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(SourceFile:962) at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(SourceFile:2834) at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setDataSource(SourceFile:2557) at com.businessobjects.samples.CRJavaHelper.passResultSet(CRJavaHelper.java:263) at org.apache.jsp.Report2008_002dviewer_jsp._jspService(Report2008_002dviewer_jsp.java:120) at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70) at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:377) at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:313) at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:260) at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:857) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489) at java.lang.Thread.run(Unknown Source) Caused by: com.crystaldecisions.reports.common.QueryEngineException: Unexpected database connector error at com.crystaldecisions.reports.queryengine.Connection.bf(SourceFile:2962) at com.crystaldecisions.reports.queryengine.Rowset.z3(SourceFile:944) at com.crystaldecisions.reports.queryengine.Rowset.bL(SourceFile:533) at com.crystaldecisions.reports.queryengine.Rowset.zM(SourceFile:245) at com.crystaldecisions.reports.queryengine.Connection.a(SourceFile:776) at com.crystaldecisions.reports.queryengine.Table.a(SourceFile:2234) at com.crystaldecisions.reports.queryengine.Table.if(SourceFile:2161) at com.crystaldecisions.reports.queryengine.Table.try(SourceFile:1525) at com.crystaldecisions.reports.queryengine.Table.a(SourceFile:568) at com.crystaldecisions.reports.queryengine.Table.u7(SourceFile:2405) at com.crystaldecisions.reports.datafoundation.DataFoundation.a(SourceFile:1234) at com.crystaldecisions.reports.dataengine.dfadapter.DFAdapter.a(SourceFile:344) at com.crystaldecisions.reports.dataengine.dfadapter.CheckDatabaseHelper.a(SourceFile:66) at com.crystaldecisions.reports.dataengine.datafoundation.CheckDatabaseCommand.new(SourceFile:100) at com.crystaldecisions.reports.common.CommandManager.a(SourceFile:71) at com.crystaldecisions.reports.common.Document.a(SourceFile:203) at com.crystaldecisions.reports.dataengine.VerifyDatabaseCommand.new(SourceFile:76) at com.crystaldecisions.reports.common.CommandManager.a(SourceFile:71) at com.crystaldecisions.reports.common.Document.a(SourceFile:203) at com.businessobjects.reports.sdk.requesthandler.f.a(SourceFile:175) at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.a(SourceFile:373) at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.if(SourceFile:352) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(SourceFile:1291) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:661)

    Please ensure that you have upgraded to Service Pack 4.  There was a bug related to Unexpected Database Connector error that was resolved in the latest service pack release this February.

  • Solve oracle multimedia post upgrade errors

    Hello,
    I performed and out of place upgrade from oracle 10.2.0.4 to 11.2.0.4.
    when I run the postupgrade script i have issues on oracle multimedia that i cannot solve.. it is about shared memory. I followed all the recommendations suggested on the pre-upgrade script.
    SQL>  @/oracle/product/11.2.0.4/dbhome_1/rdbms/admin/utlu112s.sql
    Oracle Database 11.2 Post-Upgrade Status Tool           10-03-2014 15:06:57
    Component                               Current      Version     Elapsed Time
    Name                                    Status       Number      HH:MM:SS
    Oracle Server
    .                                         VALID      11.2.0.4.0  00:14:07
    JServer JAVA Virtual Machine
    .                                         VALID      11.2.0.4.0  00:11:08
    Oracle Workspace Manager
    .                                         VALID      11.2.0.4.0  00:00:48
    Oracle Enterprise Manager
    .                                         VALID      11.2.0.4.0  00:09:58
    Oracle XDK
    .                                         VALID      11.2.0.4.0  00:02:48
    Oracle Text
    .                                         VALID      11.2.0.4.0  00:00:59
    Oracle XML Database
    .                                         VALID      11.2.0.4.0  00:05:45
    Oracle Database Java Packages
    .                                         VALID      11.2.0.4.0  00:00:20
    Oracle Multimedia
    .   ORA-00604: error occurred at recursive SQL level 1 ORA-04031: unable to
    allocate 32 bytes of shared memory ("shared pool","select col#, grantee#,
    privi...","KGLH0^34b96f2","kglHeapInitialize:temp")
    ORA-06512: at
    "SYS.DBMS_JAVA", line 655
    ORA-06512: at line 1
    .   ORA-04031: unable to allocate 32 bytes of shared memory ("shared
    pool","select col#, grantee#,
    privi...","KGLH0^34b96f2","kglHeapInitialize:temp")
    ORA-06512: at
    "SYS.DBMS_JAVA", line 655
    ORA-06512: at line 1
    .   col#, grantee#, privi...","KGLH0^34b96f2","kglHeapInitialize:temp")
    ORA-06512: at "SYS.DBMS_JAVA", line 655
    ORA-06512: at line 1
    .   ORA-06512: at "SYS.DBMS_JAVA", line 655 ORA-06512: at line 1
    .   ORA-06512: at line 1
    .   ORA-00604: error occurred at recursive SQL level 1 ORA-04031: unable to
    allocate 136 bytes of shared memory ("shared pool","select
    i.obj#,i.ts#,i.file#,...","KGLH0^4006e26c","wds: qksmmGetWorkArea")
    ORA-06512:
    at "SYS.DBMS_JAVA", line 655
    ORA-06512: at line 1
    .   ORA-04031: unable to allocate 136 bytes of shared memory ("shared
    pool","select i.obj#,i.ts#,i.file#,...","KGLH0^4006e26c","wds:
    qksmmGetWorkArea")
    ORA-06512: at "SYS.DBMS_JAVA", line 655
    ORA-06512: at line 1
    .   i.obj#,i.ts#,i.file#,...","KGLH0^4006e26c","wds: qksmmGetWorkArea")
    ORA-06512: at "SYS.DBMS_JAVA", line 655
    ORA-06512: at line 1
    .   ORA-06512: at "SYS.DBMS_JAVA", line 655 ORA-06512: at line 1
    .   ORA-06512: at line 1
    .   ORA-04045: errors during recompilation/revalidation of
    ORDSYS./f87ac59f_DicomEngine
    ORA-04031: unable to allocate 32 bytes of shared
    memory ("shared pool","ALTER JAVA CLASS
    "ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
    ORA-06512: at
    "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
    ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
    line 276
    ORA-06512: at line 1
    .   ORDSYS./f87ac59f_DicomEngine ORA-04031: unable to allocate 32 bytes of
    shared memory ("shared pool","ALTER JAVA CLASS
    "ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
    ORA-06512: at
    "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
    ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
    line 276
    ORA-06512: at line 1
    .   ORA-04031: unable to allocate 32 bytes of shared memory ("shared
    pool","ALTER JAVA CLASS
    "ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
    ORA-06512: at
    "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
    ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
    line 276
    ORA-06512: at line 1
    .   JAVA CLASS "ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
    ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
    ORA-06512: at
    "ORDSYS.ORD_DICOM_ADMIN", line 276
    ORA-06512: at line 1
    .   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945 ORA-06512: at
    "ORDSYS.ORD_DICOM_ADMIN", line 276
    ORA-06512: at line 1
    .   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 276 ORA-06512: at line 1
    .   ORA-06512: at line 1
    .   ORA-53051: no editDataModel session found ORA-06512: at
    "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306
    ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
    line 125
    ORA-06512: at line 14805
    .   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306 ORA-06512: at
    "ORDSYS.ORD_DICOM_ADMIN", line 125
    ORA-06512: at line 14805
    .   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 125 ORA-06512: at line 14805
    .   ORA-06512: at line 14805
    .   ORA-53051: no editDataModel session found ORA-06512: at
    "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306
    ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
    line 125
    ORA-06512: at line 67
    .   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306 ORA-06512: at
    "ORDSYS.ORD_DICOM_ADMIN", line 125
    ORA-06512: at line 67
    .   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 125 ORA-06512: at line 67
    .                                       INVALID      11.2.0.4.0  00:55:05
    Spatial
    .                                    OPTION OFF      10.2.0.4.0  00:00:00
    Oracle Expression Filter
    .                                         VALID      11.2.0.4.0  00:00:16
    Oracle Rules Manager
    .                                         VALID      11.2.0.4.0  00:00:14
    Final Actions
    .                                                                00:01:34
    Total Upgrade Time: 01:43:11
    PL/SQL procedure successfully completed.
    thank you
    Mario.

    I explicity set up the sga_target to 668MB as suggested by the pre-upgrade script.
    see  the output of preugrade tool:
    SQL> @/oracle/utlu112i.sql
    Oracle Database 11.2 Pre-Upgrade Information Tool 10-02-2014 17:24:25
    Script Version: 11.2.0.4.0 Build: 001
    Database:
    --> name:          FUELPLUS
    --> version:       10.2.0.4.0
    --> compatible:    10.2.0.3.0
    --> blocksize:     8192
    --> platform:      Solaris Operating System (x86-64)
    --> timezone file: V4
    Tablespaces: [make adjustments in the current environment]
    --> SYSTEM tablespace is adequate for the upgrade.
    .... minimum required size: 1071 MB
    --> UNDOTBS1 tablespace is adequate for the upgrade.
    .... minimum required size: 400 MB
    --> SYSAUX tablespace is adequate for the upgrade.
    .... minimum required size: 804 MB
    --> TEMP tablespace is adequate for the upgrade.
    .... minimum required size: 60 MB
    Flashback: OFF
    Update Parameters: [Update Oracle Database 11.2 init.ora or spfile]
    Note: Pre-upgrade tool was run on a lower version 64-bit database.
    --> If Target Oracle is 32-Bit, refer here for Update Parameters:
    WARNING: --> "sga_target" needs to be increased to at least 484 MB
    --> If Target Oracle is 64-Bit, refer here for Update Parameters:
    WARNING: --> "sga_target" needs to be increased to at least 668 MB
    Renamed Parameters: [Update Oracle Database 11.2 init.ora or spfile]
    -- No renamed parameters found. No changes are required.
    Obsolete/Deprecated Parameters: [Update Oracle Database 11.2 init.ora or spfile]
    --> cursor_space_for_time        11.1       DEPRECATED
    --> background_dump_dest         11.1       DEPRECATED   replaced by  "diagnostic_dest"
    --> user_dump_dest               11.1       DEPRECATED   replaced by  "diagnostic_dest"
    --> cursor_space_for_time        11.2       DEPRECATED
    Components: [The following database components will be upgraded or installed]
    --> Oracle Catalog Views         [upgrade]  VALID
    --> Oracle Packages and Types    [upgrade]  VALID
    --> JServer JAVA Virtual Machine [upgrade]  VALID
    --> Oracle XDK for Java          [upgrade]  VALID
    --> Oracle Workspace Manager     [upgrade]  VALID
    --> EM Repository                [upgrade]  VALID
    --> Oracle Text                  [upgrade]  VALID
    --> Oracle XML Database          [upgrade]  VALID
    --> Oracle Java Packages         [upgrade]  VALID
    --> Oracle interMedia            [upgrade]  VALID
    --> Spatial                      [upgrade]  VALID
    --> Data Mining                  [upgrade]  VALID
    --> Expression Filter            [upgrade]  VALID
    --> Rule Manager                 [upgrade]  VALID
    Miscellaneous Warnings
    WARNING: --> Database is using a timezone file older than version 14.
    .... After the release migration, it is recommended that DBMS_DST package
    .... be used to upgrade the 10.2.0.4.0 database timezone version
    .... to the latest version which comes with the new release.
    WARNING: --> Database contains INVALID objects prior to upgrade.
    .... The list of invalid SYS/SYSTEM objects was written to
    .... registry$sys_inv_objs.
    .... The list of non-SYS/SYSTEM objects was written to
    .... registry$nonsys_inv_objs.
    .... Use utluiobj.sql after the upgrade to identify any new invalid
    .... objects due to the upgrade.
    .... USER PUBLIC has 1 INVALID objects.
    WARNING: --> EM Database Control Repository exists in the database.
    .... Direct downgrade of EM Database Control is not supported. Refer to the
    .... Upgrade Guide for instructions to save the EM data prior to upgrade.
    WARNING: --> Your recycle bin is turned on and currently contains no objects.
    .... Because it is REQUIRED that the recycle bin be empty prior to upgrading
    .... and your recycle bin is turned on, you may need to execute the command:
            PURGE DBA_RECYCLEBIN
    .... prior to executing your upgrade to confirm the recycle bin is empty.
    WARNING: --> JOB_QUEUE_PROCESS value must be updated
    .... Your current setting of "10" is too low.
    .... Starting with Oracle Database 11g Release 2 (11.2), setting
    .... JOB_QUEUE_PROCESSES to 0 causes both DBMS_SCHEDULER and
    .... DBMS_JOB jobs to not run. Previously, setting JOB_QUEUE_PROCESSES
    .... to 0 caused DBMS_JOB jobs to not run, but DBMS_SCHEDULER jobs were
    .... unaffected and would still run. This parameter must be updated to
    .... a value greater than 48  (default value is 1000) prior to upgrade.
    .... Not doing so will affect the running of utlrp.sql after the upgrade
    Recommendations
    Oracle recommends gathering dictionary statistics prior to
    upgrading the database.
    To gather dictionary statistics execute the following command
    while connected as SYSDBA:
        EXECUTE dbms_stats.gather_dictionary_stats;
    Oracle recommends reviewing any defined events prior to upgrading.
    To view existing non-default events execute the following commands
    while connected AS SYSDBA:
      Events:
        SELECT (translate(value,chr(13)||chr(10),' ')) FROM sys.v$parameter2
          WHERE  UPPER(name) ='EVENT' AND  isdefault='FALSE'
      Trace Events:
        SELECT (translate(value,chr(13)||chr(10),' ')) from sys.v$parameter2
          WHERE UPPER(name) = '_TRACE_EVENTS' AND isdefault='FALSE'
    Changes will need to be made in the init.ora or spfile.
    SQL> SPOOL OFF
    here are the last 100 lines of upgrade.log
    ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
    line 276
    ORA-06512: at line 1
    .   JAVA CLASS "ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
    ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
    ORA-06512: at
    "ORDSYS.ORD_DICOM_ADMIN", line 276
    ORA-06512: at line 1
    .   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945 ORA-06512: at
    "ORDSYS.ORD_DICOM_ADMIN", line 276
    ORA-06512: at line 1
    .   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 276 ORA-06512: at line 1
    .   ORA-06512: at line 1
    .   ORA-53051: no editDataModel session found ORA-06512: at
    "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306
    ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
    line 125
    ORA-06512: at line 14805
    .   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306 ORA-06512: at
    "ORDSYS.ORD_DICOM_ADMIN", line 125
    ORA-06512: at line 14805
    .   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 125 ORA-06512: at line 14805
    .   ORA-06512: at line 14805
    .   ORA-53051: no editDataModel session found ORA-06512: at
    "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306
    ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
    line 125
    ORA-06512: at line 67
    .   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306 ORA-06512: at
    "ORDSYS.ORD_DICOM_ADMIN", line 125
    ORA-06512: at line 67
    .   ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 125 ORA-06512: at line 67
    .                                       INVALID      11.2.0.4.0  00:55:05
    Spatial
    .                                    OPTION OFF      10.2.0.4.0  00:00:00
    Oracle Expression Filter
    .                                         VALID      11.2.0.4.0  00:00:16
    Oracle Rules Manager
    .                                         VALID      11.2.0.4.0  00:00:14
    Final Actions
    .                                                                00:01:34
    Total Upgrade Time: 01:43:11
    PL/SQL procedure successfully completed.
    SQL>
    SQL> SET SERVEROUTPUT OFF
    SQL> SET VERIFY ON
    SQL> commit;
    Commit complete.
    SQL>
    SQL> shutdown immediate;
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    SQL>
    SQL>
    SQL>
    SQL> DOC
    DOC>#######################################################################
    DOC>#######################################################################
    DOC>
    DOC>   The above sql script is the final step of the upgrade. Please
    DOC>   review any errors in the spool log file. If there are any errors in
    DOC>   the spool file, consult the Oracle Database Upgrade Guide for
    DOC>   troubleshooting recommendations.
    DOC>
    DOC>   Next restart for normal operation, and then run utlrp.sql to
    DOC>   recompile any invalid application objects.
    DOC>
    DOC>   If the source database had an older time zone version prior to
    DOC>   upgrade, then please run the DBMS_DST package.  DBMS_DST will upgrade
    DOC>   TIMESTAMP WITH TIME ZONE data to use the latest time zone file shipped
    DOC>   with Oracle.
    DOC>
    DOC>#######################################################################
    DOC>#######################################################################
    DOC>#
    SQL>
    SQL> Rem Set errorlogging off
    SQL> SET ERRORLOGGING OFF;
    SQL>
    SQL> REM END OF CATUPGRD.SQL
    SQL>
    SQL> REM bug 12337546 - Exit current sqlplus session at end of catupgrd.sql.
    SQL> REM                This forces user to start a new sqlplus session in order
    SQL> REM                to connect to the upgraded db.
    SQL> exit

  • SCCM 2012 R2 SQL Database Upgrade Fails : Setup cannot upgrade the ConfigMgr database. Contact your SQL administrator.

    Hi Friends,
    We have planned to upgrade our SCCM 2012 SP1 infrastructure to SCCM 2012 R2 so we have setup test environment to test SQL database upgrade before doing same in production.
    But while testing SQL database upgrade on test machine, it is getting failed with below error.
    ConfigMgrSetupWizard.log
    ConfigMgrSetupWizard Verbose: 1 : Scripted setup failure handling callback called. Failure: 29.
    ConfigMgrSetupWizard Verbose: 1 : Received error [Setup cannot upgrade the ConfigMgr database. Contact your SQL administrator.] from native code.
    ConfigMgrSetup.log
    ERROR: SQL Server error: [23000][2627][Microsoft][SQL Server Native Client 11.0][SQL Server]Violation of PRIMARY KEY constraint 'ContentDistribution_PK'. Cannot insert duplicate key in object 'dbo.ContentDistribution'. The duplicate key value is (921). :
    tr_ContentDistributionNotification_insert
    ERROR: Failed to execute SQL Server command:  ~-- ~-- Rebuild ContentDistribution tables ~-- ~IF (EXISTS(SELECT TOP 1 1 FROM dbo.SMSData WHERE SMSBuildNumber <=  7900) AND dbo.fnIsSecondary() != 1) ~BEGIN ~    exec spRebuildContentDistribution
    @TruncateTables=0 ~END
    Failed to create process of SetupWpf.exe.
    Can anyone please help to get this resolved.
    Thanks. 

    We found out that there were duplicate entries in the PkgStatus_G and the PkgServers_G tables in the SCCM DB.  We identified them, deleted them , and then we were able to run the /TESTDBUPGRADE command and it went through fine.  We performed
    all of this on a COPY of the PROD DB and then moved the changes in PROD.  Hope this helps someone.
    - Dave

  • Upgrade Error when starting the DB   ora-00201 control file version

    Hi Experts,
    While Upgrading R12.1.1 Vision database version from 11.1.0.7 to 11gR2on RHEL 6 64bit Plateform the following patches 've been applied successfully on apps tier
    According to note ID: 1058763.1
    Patch 7303030 , 9062910 , 8919489 - Oracle E-Business Suite Techstack 12.1.3 Product Release Update Pack ANd 9868229 - 10163753 - 11071569 -
    9738085 - 9852070 - 12686610 - 6400501 Applied without any Issue.
    On DB tier i.e 11.1.0.7 these patches are applied successfully According to metalink Note *[ID 1058763.1]*
    Oracle Database Upgrade Guide 11g Release 2 (11.2) And Complete Checklist for Manual Upgrades to 11gR2 *[ID 837570.1]*
    *7695070 - Change In The Timezone File Format*, And 13417321 -14112098 DST Changes For DSTV18 -7695070
    Than we 've. Downloaded the 11.2.0.3 x86_64 software (of patch 10404530) Installed 11.2.0.3 on this Location /u01/oracle/VIS/db/tech_st/11.2.0.3
    the Old ORACLE_HOME is /u01/oracle/VIS/db/tech_st/11.1.0.7
    AND after that
    On 11.2.0.3 home, applied these additional 11.2.0.3 RDBMS patches successfully according to metalink Nots Mentioned above :
    *4247037 , 9858539, 3) 12942119 ,12960302 ,12985184 ,13001379,13004894 ,13258936 , 13366268,*
    Now Need to Run utlu112i.sql on existing 11.1.0.7 oracle database.. for that started the listener But when i tried
    to startup DB from sqlplus prompt. got this ora-00201 control file version error,
    We Unable to start the Database in order to run the utlu112i.sql on existing 11.1.0.7 oracle database..
    Please advise. we are doing manual upgrade.
    Thanks
    Priya

    Please verify the value of COMPATIBLE initialization parameter.
    Troubleshooting ORA-201 ORA-202 [ID 948710.1]
    OERR: ORA 201 control file version <num> incompatible with Oracle version <nu [ID 18286.1]
    Thanks,
    Hussein

  • Directory ORACLE_HOME doesn't exist. in Database Upgrade 11.2.0.2

    Hi all,
    I am following the below document for database upgrade on EBS 12.1.3 database from 11.1.0.7 to 11.2.0.2.
    "Interoperability Notes EBS R12 with Database 11gR2 [ID 1058763.1]"
    We have completed upto
    6.     Install Oracle Database 11g Products from the 11g Examples CD
    but not "3.Update application tier context file with new database listener port number (conditional) "
    as it was conditional
    Old home:-F:\oracle\PROD\db\tech_st\11.1.0
    New Home:-F:\app\mocppd\product\11.2.0\dbhome_1
    set ORACLE_HOME=F:\app\mocppd\product\11.2.0\dbhome_1
    set ORACLE_BASE=F:\app\mocppd
    set LD_LIBRARY_PATH=F:\app\mocppd\product\11.2.0\dbhome_1\LIB
    set PERL5LIB=F:\app\mocppd\product\11.2.0\dbhome_1\perl\libcd F:\app\mocppd\product\11.2.0\dbhome_1\nls\data\old
    perl cr9idata.pl
    Got error on
    "7.Create nls/data/9idata directory" as
    perl cr9idata.pl
    F:\app\mocppd\product\11.2.0\dbhome_1\nls\data\old>perl cr9idata.pl
    cygwin warning:
      MS-DOS style path detected: F:/app/mocppd/product/11.2.0/dbhome_1
      Preferred POSIX equivalent is: /cygdrive/f/app/mocppd/product/11.2.0/dbhome_1
      CYGWIN environment variable option "nodosfilewarning" turns off this warning.
      Consult the user's guide for more details about POSIX paths:
        http://cygwin.com/cygwin-ug-net/using.html#using-pathnames
    Directory /F:/app/mocppd/product/11.2.0/dbhome_1/nls/data doesn't exist. Can't p
    roceed.I didnot understand why the "Directory /F:/app/mocppd/product/11.2.0/dbhome_1/nls/data doesn't exist" has '/'
    in starting of the path
    Thanks
    Nawneet

    but why it taking /usr/bin/perl. we are in windows .This is an expected output since you use Cygwin.
    Please set perl to the one you have under RDBMS %ORACLE_HOME% and try again (%ORACLE_HOME%\appsutil\perl).
    Thanks,
    Hussein

  • Zen 4 - Zen 6.5 Inventory database upgrade fails

    Hi all,
    Have installed Zen 6.5 over a Zen 4 server (nw65) running inventory.
    Database is on a seperate oracle server.
    When I start inventory, it starts the database upgrade and then fails
    with a java exception part way through, and then says "stopping the
    upgrade service".
    Following is the log. Anyone know which bit is falling over and why?
    There's a few errors in the log and I don't know which are cosmetic/non
    critical. Either way, I've researched each and can't find any fixes
    anyway.
    cheers
    Dave
    [12/8/05 14:58:40.307] ZENInv - Server Config: The severconfig service
    start is pending...
    [12/8/05 14:58:40.464] ZENInv - Server Config: Getting Cascade INit
    time
    [12/8/05 14:58:41.462] ZENInv - Server Config: Database Location
    Policy DN is CN=Server Package - DAN02:General:ZENworks
    Database.OU=POLICIES.OU=APPLICATIONS.O=CHISHOLM
    [12/8/05 14:58:43.573] ZENInv - Server Config: The severconfig service
    is started...
    [12/8/05 14:58:43.707] ZenInv - Upgrade Service: Info : Read
    zenInvComponentStatus = 6.5 12 0
    [12/8/05 14:58:43.707] ZenInv - Upgrade Service: Inventory Server
    zenInvComponentStatus = 6.5 12 0
    [12/8/05 14:58:43.720] Service Manager: start(ServiceDataAccessor,
    String[]) not found in
    'com.novell.zenworks.desktop.inventory.storer.Stor erServiceInit'
    [12/8/05 14:58:43.740] ZENInv - Storer: Start with
    'ServiceStatusChangeListener' invoked
    [12/8/05 14:58:44.824] ZenInv - Upgrade Service: Unzipping the file
    migrate.zip
    [12/8/05 14:58:46.718] ZenInv - Upgrade Service: Transforming the
    Migration SQL files...
    [12/8/05 14:58:51.768] ZENInv - Storer: zenworks.isClosed =true
    [12/8/05 14:58:53.699] ZENInv - Storer: The current NDS tree=CIT
    [12/8/05 14:58:53.724] ZENInv - Storer: Storer from dblocation user:
    MW_DBA driver: oracle.jdbc.driver.OracleDriver protocol: jdbc:oracle:
    subname: thin:@ port: 1522
    [12/8/05 14:58:53.728] ZENInv - Storer: url[From DBObject]:
    jdbc:oracle:thin:@ora01a.chisholm.vic.edu.au:1522: dw
    [12/8/05 14:58:53.756] ZENInv - Storer: wsdn:
    CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLMi = 0
    [12/8/05 14:58:53.973] ZENInv - Storer: Loading Storer test properties
    file
    [12/8/05 14:58:54.053] Service Manager: start(ServiceDataAccessor,
    String[]) not found in
    'com.novell.zenworks.desktop.inventory.strconverte r.STRConverterServiceInit'
    [12/8/05 14:58:54.059] ZENInv - STRConverter: Start with
    'ServiceStatusChangeListener' invoked
    [12/8/05 14:58:54.755] ZENInv - Status Reporting: Messages are written
    into XML file for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:58:54.914] ZENInv - Status Reporting: Number of records to
    add are: 1 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:58:55.012] ZENInv - Status Reporting: Adding record 0 for
    DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:58:55.729] ZENInv - Status Reporting: Number of modified
    records are: 0 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:58:55.780] ZENInv - Storer: Database is not
    initialized..will retry after 300 seconds
    [12/8/05 14:58:55.787] ZENInv - Storer: Storer: Database not
    initialized as it is being upgraded ...will retry after 300 seconds.
    [12/8/05 14:58:55.788] ZENInv - Status Reporting: Messages are written
    into XML file for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:58:55.826] ZENInv - Status Reporting: Number of records to
    add are: 1 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:58:55.860] ZENInv - Status Reporting: Adding record 0 for
    DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:58:57.439] ZENInv - Status Reporting: Number of modified
    records are: 0 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:59:04.100] ZENInv - STRConverter: Loading STRConverter test
    properties file
    [12/8/05 14:59:04.201] Service Manager: start(ServiceDataAccessor,
    String[]) not found in
    'com.novell.zenworks.desktop.inventory.senderrecei ver.control.ReceiverServiceInit'
    [12/8/05 14:59:15.618] ZENInv - SendRec Common: entPushDir =
    SYS:\ZENworks\Inv\ScanDir\EntPushDir
    [12/8/05 14:59:15.618] ZENInv - SendRec Common: entMergeDirD =
    SYS:\ZENworks\Inv\ScanDir\EntMergeDir
    [12/8/05 14:59:15.618] ZENInv - SendRec Common: dbDirD =
    SYS:\ZENworks\Inv\ScanDir\DbDir
    [12/8/05 14:59:15.625] ZENInv - SendRec Common: serverName = DAN02
    [12/8/05 14:59:15.626] ZENInv - SendRec Common: serviceDN =
    CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:59:15.626] ZENInv - SendRec Common: treeName = CIT
    [12/8/05 14:59:15.626] ZENInv - SendRec Common: hasSSD = false
    [12/8/05 14:59:15.626] ZENInv - SendRec Common: hasISD = false
    [12/8/05 14:59:15.626] ZENInv - SendRec Common: hasESD = true
    [12/8/05 14:59:15.632] ZENInv - SendRec Common: hasDB = true
    [12/8/05 14:59:15.633] ZENInv - SendRec Common: securityDir =
    SYS:\PUBLIC\ZENWORKS\WMINV\PROPERTIES
    [12/8/05 14:59:15.661] Service Manager: start(ServiceDataAccessor,
    String[]) not found in
    'com.novell.zenworks3x.desktop.inventory.senderrec eiver.control.ReceiverServiceInit'
    [12/8/05 14:59:15.882] ZENInv - CascadedBaseTime Server:
    zenInvCascadeBaseTimeService: CBTServiceController: Startup Properties:
    {basetime=Thu Jan 01 10:00:00 EST 1970,
    servicename=zenInvCascadeBaseTimeService, portnumber=0}
    [12/8/05 14:59:16.367] ZENInv - IFS Server: zeninvReceiverService:
    FileServiceController: Startup Properties: {chunksize=4096,
    transfers=100,
    rootdirectory=SYS:\ZENworks\Inv\ScanDir\EntPushDir \ZipDir,
    timeout=60000, servicename=zeninvReceiverService, portnumber=0}
    [12/8/05 14:59:25.771] ZENInv - TCPReceiver: cascadingBaseTime = 0
    [12/8/05 14:59:25.771] ZENInv - TCPReceiver: entPushDir =
    SYS:\ZENworks\Inv\ScanDir\EntPushDir
    [12/8/05 14:59:25.777] ZENInv - TCPReceiver: serverName = DAN02
    [12/8/05 14:59:25.777] ZENInv - TCPReceiver: serviceDN =
    CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:59:25.777] ZENInv - TCPReceiver: treeName = CIT
    [12/8/05 14:59:25.778] ZENInv - TCPReceiver: hasDB = true
    [12/8/05 14:59:25.971] Service Manager: start(ServiceDataAccessor,
    String[]) not found in
    'com.novell.zenworks.common.inventory.dictionaryup date.provider.DictProvider'
    [12/8/05 14:59:26.005] ZENInv - TCPReceiver: Receiver Started without
    CLUSTER
    [12/8/05 14:59:26.006] ZENInv - TCPReceiver: Receiver Binds to Port
    Number : 65432
    [12/8/05 14:59:26.073] ZENInv - IFS Server: zenInvDictProvider:
    FileServiceController: Startup Properties: {chunksize=4096,
    transfers=100, rootdirectory=SYS:\ZENworks\Inv\server\DictDir,
    timeout=60000, servicename=zenInvDictProvider, portnumber=0}
    [12/8/05 14:59:26.183] Service Manager: start(ServiceDataAccessor,
    String[]) not found in
    'com.novell.zenworks.common.inventory.dictionaryup date.consumer.DictConsumer'
    [12/8/05 14:59:28.918] ZENInv - Dictionary Consumer:
    DictConsumerUtility::getUpdatePolicyDN: getDictionaryUpdatePolicy
    returned attribs.returnValue = 0
    [12/8/05 14:59:28.919] ZENInv - Dictionary Consumer:
    DictConsumerService::DictDownloadThread::run:
    UpdatePolicyNotFoundException.
    com.novell.zenworks.common.inventory.dictionaryupd ate.consumer.UpdatePolicyNotFoundException
    at
    com.novell.zenworks.common.inventory.dictionaryupd ate.consumer.DictConsumerUtility.getUpdatePolicyDN (DictConsumerUtility.java:237)
    at
    com.novell.zenworks.common.inventory.dictionaryupd ate.consumer.DictConsumerService$DictDownloadThrea d.setUpdatePolicyAttribs(DictConsumerService.java: 688)
    at
    com.novell.zenworks.common.inventory.dictionaryupd ate.consumer.DictConsumerService$DictDownloadThrea d.getFileClientProperties(DictConsumerService.java :616)
    at
    com.novell.zenworks.common.inventory.dictionaryupd ate.consumer.DictConsumerService$DictDownloadThrea d.transferFiles(DictConsumerService.java:429)
    at
    com.novell.zenworks.common.inventory.dictionaryupd ate.consumer.DictConsumerService$DictDownloadThrea d.run(DictConsumerService.java:211)
    [12/8/05 14:59:28.921] ZENInv - Status Reporting: Messages are written
    into XML file for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:59:28.953] ZENInv - Status Reporting: Number of records to
    add are: 1 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:59:28.986] ZENInv - Status Reporting: Adding record 0 for
    DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:59:29.326] ZENInv - Status Reporting: Number of modified
    records are: 0 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:59:29.326] ZENInv - Dictionary Consumer:
    DictConsumerService::FileDownloadListener::downloa dFailed.
    [12/8/05 14:59:59.680] ZenInv - Upgrade Service: Starting Schema
    Migration
    [12/8/05 14:59:59.751] ZenInv - Upgrade Service: mw_dba->alter
    tablespace cim3 default storage (maxextents unlimited) is being
    executed
    [12/8/05 14:59:59.752] ZenInv - Upgrade Service: Could not do the
    operation. details:ORA-25143: default storage clause is not compatible
    with allocation policy
    ErrorCode:25143
    [12/8/05 14:59:59.752] ZenInv - Upgrade Service: Totaltime taken for
    Schema Migration : 38
    [12/8/05 14:59:59.851] ZENInv - Storer: cim.isClosed =true
    [12/8/05 14:59:59.937] ZENInv - Status Reporting: Messages are written
    into XML file for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 14:59:59.970] ZENInv - Status Reporting: Number of records to
    add are: 1 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 15:00:00.133] ZENInv - Status Reporting: Adding record 0 for
    DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 15:00:00.277] ZENInv - Status Reporting: Number of modified
    records are: 0 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 15:00:00.719] ZenInv - Upgrade Service: migrateDbToMidas(true)
    failed in AlterProcedure
    [12/8/05 15:00:00.728] ZENInv - Status Reporting: Messages are written
    into XML file for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 15:00:00.761] ZENInv - Status Reporting: Number of records to
    add are: 1 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 15:00:00.795] ZENInv - Status Reporting: Adding record 0 for
    DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 15:00:00.964] ZENInv - Status Reporting: Number of modified
    records are: 0 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 15:00:00.966] ZenInv - Upgrade Service: Upgrade database to
    ZENworks 6.5 failed. Reinstall ZENworks 6.5 and start the inventory
    server again
    [12/8/05 15:00:00.967] ZENInv - Status Reporting: Messages are written
    into XML file for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 15:00:01.000] ZENInv - Status Reporting: Number of records to
    add are: 1 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 15:00:01.038] ZENInv - Status Reporting: Adding record 0 for
    DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 15:00:01.188] ZENInv - Status Reporting: Number of modified
    records are: 0 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
    [12/8/05 15:00:01.237] ZenInv - Upgrade Service: [EnumModifier]
    modifyEnumTables, Running EnumModifier in integrated mode with
    upgradeService
    [12/8/05 15:00:01.237] ZenInv - Upgrade Service: [EnumModifier]
    modifyEnumTables, dbDriver:oracle.jdbc.driver.OracleDriver
    [12/8/05 15:00:01.237] ZenInv - Upgrade Service: [EnumModifier]
    modifyEnumTables,
    dbURL:jdbc:oracle:thin:@ora01a.chisholm.vic.edu.au :1522:dw
    [12/8/05 15:00:01.239] ZenInv - Upgrade Service: [EnumModifier]
    modifyEnumTables, dbType:1
    [12/8/05 15:00:01.239] ZenInv - Upgrade Service: [EnumModifier]
    modifyEnumTables, dbUser:MW_DBA
    [12/8/05 15:00:01.239] ZenInv - Upgrade Service: [EnumModifier]
    modifyEnumTables, dbPasswd:novell
    [12/8/05 15:00:01.248] ZenInv - Upgrade Service: [EnumModifier] Product
    Version: ZFD 4
    [12/8/05 15:00:01.298] ZenInv - Upgrade Service: [EnumModifier]
    checkConditions(), Executing check 'Statements':5
    [12/8/05 15:00:01.298] ZenInv - Upgrade Service: [EnumModifier]
    DatabaseEnumsModifier::checkResult(), query: insert into
    cim.upgrademethod_en_US Values (13, 'Socket 423')
    [12/8/05 15:00:01.311] ZenInv - Upgrade Service: [EnumModifier]
    checkResult, errorcode:1
    [12/8/05 15:00:01.311] ZenInv - Upgrade Service: [EnumModifier]
    checkResult, Non-fatal error:1
    [12/8/05 15:00:01.312] ZenInv - Upgrade Service: [EnumModifier]
    DatabaseEnumsModifier::checkResult(), query: insert into
    cim.upgrademethod_en_US Values (14, 'Socket A (Socket 462)')
    [12/8/05 15:00:01.316] ZenInv - Upgrade Service: [EnumModifier]
    checkResult, errorcode:1
    [12/8/05 15:00:01.316] ZenInv - Upgrade Service: [EnumModifier]
    checkResult, Non-fatal error:1
    [12/8/05 15:00:01.317] ZenInv - Upgrade Service: [EnumModifier]
    DatabaseEnumsModifier::checkResult(), query: insert into
    cim.upgrademethod_en_US Values (15, 'Socket 478')
    [12/8/05 15:00:01.321] ZenInv - Upgrade Service: [EnumModifier]
    checkResult, errorcode:1
    [12/8/05 15:00:01.322] ZenInv - Upgrade Service: [EnumModifier]
    checkResult, Non-fatal error:1
    [12/8/05 15:00:01.322] ZenInv - Upgrade Service: [EnumModifier] Da

    ok putting inv into "ALL" debug mode, it told me it was running
    init_sl_0.sql
    I found this file contained in migrate.zip under the wminv\properties
    directory.
    So I extracted the migrate.zip file, edited init_sl_0.sql and removed
    the alter tablespace lines. Why they're wanting to do alter tablespace
    I have no idea - applications shouldn't expect to be able to do that...
    it's up to the organisation and the DBA to manage the tablespaces, not
    the application.
    I then re-zipped all the files using Winzip and named the file
    migrate.zip and placed it in the properties directory.
    Now, when the upgrade runs I get a java exception when it tries to
    unzip migrate.zip and the upgrade bombs.
    I also tried just opening the migrate.zip file with Winzip and directly
    editing the file from within Winzip, which does allow for this. However
    it appears the files inside the archive are flagged read-only, so
    Winzip can't rewrite the edited file back into the same folder location
    within the archive.
    Here's the java exception:
    ***12/21/05 16:24:40.789] ZenInv - Upgrade Service: Unzipping the file
    migrate.zip
    [12/21/05 16:24:40.827] ZenInv - Upgrade Service:
    [12/21/05 16:24:40.827] ZenInv - Upgrade Service: Exception while
    unzipping the migration zip file
    java.lang.NullPointerException
    at
    com.novell.zenworks.desktop.inventory.upgradeServi ce.MigUnzip.unZipFile(AlterProcedure.java:4557)
    at
    com.novell.zenworks.desktop.inventory.upgradeServi ce.MigUnzip.unzip(AlterProcedure.java:4522)
    at
    com.novell.zenworks.desktop.inventory.upgradeServi ce.AlterProcedure.unzipMigrateZipFile(AlterProcedu re.java:1983)
    at
    com.novell.zenworks.desktop.inventory.upgradeServi ce.AlterProcedure.unzipMigrateZipFile(AlterProcedu re.java:1975)
    at
    com.novell.zenworks.desktop.inventory.upgradeServi ce.UpgradeServiceController.aInitMigration(Upgrade ServiceController.java:218)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Nativ e Method)
    at
    sun.reflect.NativeMethodAccessorImpl.invoke(Native MethodAccessorImpl.java:39)
    at
    sun.reflect.DelegatingMethodAccessorImpl.invoke(De legatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at
    com.novell.zenworks.desktop.inventory.senderreceiv er.statemachine.StateMachine.execute(StateMachine. java:68)
    at
    com.novell.zenworks.desktop.inventory.upgradeServi ce.UpgradeServiceController.init(UpgradeServiceCon troller.java:113)
    at
    com.novell.zenworks.desktop.inventory.upgradeServi ce.UpgradeServiceThread.run(UpgradeServiceThread.j ava:81)
    [12/21/05 16:24:40.828] ZenInv - Upgrade Service: unzipMigrateZipFile()
    failed in AlterProcedure
    [12/21/05 16:24:40.829] ZenInv - Upgrade Service: in aLogError() method
    [12/21/05 16:24:40.830] ZenInv - Upgrade Service: Upgrade database to
    ZENworks 6.5 failed. Reinstall ZENworks 6.5 and start the inventory
    server again
    Ok.. what am I doing wrong ? :) It shouldn't be this hard....
    cheers
    Dave

  • Database Upgrade 10.1.0.4 to 10.2.0.4

    Newbie here.
    So I am starting to use OEM on Windows XP workstation and have upgraded it to 10.2.0.4 and also wanted to upgrade the repository to 10.2.0.4 as well.
    So this is what I have done so far.
    I have installed 10.2.0.1 into a new home. I have patch it to 10.2.0.4. I am using DBUA to upgrade the database and have set my ORACLE_HOME to the new home and started DBUA. Everything is working just fine until the new OracleService is created and is trying to start. I received a message that it is unable to start service. If i click on continue I received the ORA-12560 TNS error. I have tried multiple times to get this to work and it always fails on this part..
    Also to let you know that when I connect to SQLPlus before upgrade I have to connect using sysplus sysman/xxxxx@emrep with out emrep it won't connect. I have also set TNS_ADMIN to the original homes network/admin directory.
    I have research the documentation on upgrading, but maybe I am missing a step or someone has run into the same issue.
    Any help you can lend me would be appreciated.

    The database files won't be copied over. As general practice, databases aren't stored under Oracle Homes. You could always fix that by moving the database, backup the control file to trace, and edit it with new file locations. I wouldn't worry about that right now.
    Did you run the prerequisite script before trying to upgrade?
    <10.2 HOME>/rdbms/admin/utlu102i.sql
    Once a database is opened upgrade, you won't be able to open it with the old binaries.
    Was the listener up when you tried to connect to it with 10.1? Were there any errors?
    The manual process of upgrading the database is to export the 10.2 env, open the database upgrade, upgrade the data dictionary <10.2HOME>/rdbms/admin/catupgrd.sql, startup the database normally, and Compile all the invalid objects <10.2HOME>/rdbms/admin/utlrp.sql. I would make sure to go over the sql that executes prerequisite checks and read through the upgrade docs. I would also take a backup before doing anything.

  • EBS Upgrade Error

    I received an error during an EBS database upgrade from 9.2.0.5 to 10.2 using DBUA. The error was due to my UNDO tablespace size being too small. According to the Database Upgrade Guide, if you receive this error during upgrading your should:
    1. increase the size of the undo tablespace
    2. "shutdown abort" the database
    3. "startup upgrade" the database
    4. restart the dbua
    When restarting the DBUA I received the error message: ORA-903 Invalid Identifier PVR_VERSION.
    So, instead I simply logged into sqlplus as sysdba and started the catupgrd.sql script. Will this work? Will I be able to continue my upgrade using the manual procedures even though I started it using dbua?
    Thanks

    plz check step 11 and 12 of the db upgrade guid
    11. Run utlu102s.sql to display the results of the upgrade:
    SQL> @utlu102s.sql
    The Post-upgrade Status Tool displays the status of the database components in
    the upgraded database and the time required to complete each component
    upgrade. The Upgrade Status Tool displays output similar to the following:
    Oracle Database 10.2 Upgrade Status Utility 04-20-2005 05:18:40
    Component Status Version HH:MM:SS
    Oracle Database Server VALID 10.2.0.1.0 00:11:37
    JServer JAVA Virtual Machine VALID 10.2.0.1.0 00:02:47
    Oracle XDK VALID 10.2.0.1.0 00:02:15
    Oracle Database Java Packages VALID 10.2.0.1.0 00:00:48
    Oracle Text VALID 10.2.0.1.0 00:00:28
    Oracle XML Database VALID 10.2.0.1.0 00:01:27
    Oracle Workspace Manager VALID 10.2.0.1.0 00:00:35
    Oracle Data Mining VALID 10.2.0.1.0 00:15:56
    Messaging Gateway VALID 10.2.0.1.0 00:00:11
    OLAP Analytic Workspace VALID 10.2.0.1.0 00:00:28
    OLAP Catalog VALID 10.2.0.1.0 00:00:59
    Oracle OLAP API VALID 10.2.0.1.0 00:00:53
    Oracle interMedia VALID 10.2.0.1.0 00:08:03
    Spatial VALID 10.2.0.1.0 00:05:37
    Oracle Ultra Search VALID 10.2.0.1.0 00:00:46
    Oracle Label Security VALID 10.2.0.1.0 00:00:14
    Oracle Expression Filter VALID 10.2.0.1.0 00:00:16
    Oracle Enterprise Manager VALID 10.2.0.1.0 00:00:58
    Total Upgrade Time: 00:56:09
    12. Turn off the spooling of script results to the log file:
    SQL> SPOOL OFF
    Then, check the spool file and verify that the packages and procedures compiled
    successfully. You named the spool file in Step 9; the suggested name was
    upgrade.log. Correct any problems you find in this file (see "Troubleshoot the
    Upgrade" on page 3-22) and rerun the catupgrd.sql script, if necessary. You can
    rerun any of the scripts described in this chapter as many times as necessary. (If
    you have JAVAVM in your database, but you did not install the companion Oracle
    Database 10g Products, you will most likely receive error message ORA-29558.)
    fadi hasweh
    http://oracle-magic.blogspot.com

  • CR XI Database Connector Error 220 Out of Range with Remedy AR System

    Post Author: schilders
    CA Forum: Data Connectivity and SQL
    Good Afternoon,
    We just upgraded to CR XI and I'm now attempting to refresh a report based on our Action Request System.  I received the database connector error 220 out of range and cannot refresh the report.  Has anyone else experienced this issue?  If so, how did you fix it?
    Thanks,
    Sid

    Post Author: Alleda
    CA Forum: Data Connectivity and SQL
    Hi
    I have a similar problem, have you found any solution?
    Dan

Maybe you are looking for

  • Creating a new project in imovie

    I have a project that is having a lot of issues playing back in full screen...iMovie 11'...it is running over an hour, I have a suspicion it is the audio (voiceovers and such)...how do I save, finalize, or move half the movie so that i can create 2 h

  • Searchable database in Dreamweaver CS4

    I want to create a page where a list our stores that would be searchable by State or Country. I have a very simple Excle file with all the information for the stores including phone numbers and addresses. I want fileds on the page that will allow a u

  • Compton + Dwm: Shadow as semi-transparent border?

    Hi! http://i.imgur.com/XQME18jl.png I ran into this image while derping on the internet and I've been trying to get borders/shadows like in that picture for a some time. I know that this is achieved using Compton and Dwm, but I can't find a way how t

  • Game Board on Pogo Games is partially hidden

    For some reason the game board on my Pogo games has slid or moved over under the chat area.  I cannot get it to move back.  I can enlarge the outside screen but the game board doesn't move.  Their support services have been unable to resolve the prob

  • Aperture will not recognize photos after failed import?

    Hi, I'm running a 13.3" MacBook Pro circa fall 2010 with 10.6.8.  I was uploading photos from an SD card I use with my camera.  I accidentally pressed "import all", and Aperture began to import everything on the card.  I did not want this, so I stopp