Database upgrade process and step

Hi,
I am trying to do as following:
I have old server with 10.2.0.3 32 bits on Linux.
We are trying to have RH Linux 5.4 64 bits and oracle 10.2.0.3 64 bits.
How can i restore from 10.2.0.3 32 bits cold backup to new server?
Thanks
Pat
Edited by: user12020966 on Feb 4, 2010 10:49 AM

Pl see your other post - Re: step to upgrade 10.2.0.3 to on new server 10.2.0.4
Srini

Similar Messages

PROCESS AND STEPS OF CONFIG FOR IMPORT MATERIAL RECEIVED AND SALE TO CUSTOM

Hi,
We have plan to develop new process is import the material at plant then repack the material in different size and sale
the material to customer.
I am not fully aware of entire process of MM/FI/SD integration part and process steps.
Can anybady help me to provide Entire process and steps of transaction and config process ?
Thanks in advance
Regards
Tarunkumar

You are asking almost the entire configuration of MM/SD/FI which is not possible. Please describe your process where you need to answer for the following:-
a) whether the import material would be sold to domestic customer
b) whether the import material would further be processed in a plant
c) whether the import material would be cleared at domestic customs
For each and every above question, you need to follow a different configuration in SAP. Also first search the forum based on your current scenario and wherever you are unable to proceed further, please post that issue only instead asking for entire configuration.
thanks
G. Lakshmipathi

Siebel 7.8 -- 8 upgrade process and environments

Hi,
I'm new to Siebel Upgrade and I'm trying to figure out the upgrade process searching on the bookshelf and white papers (best practices).
I still can't comprehend the upgrade architecture and where the new Siebel sw (for ex. Siebel 8 in my case) has to be installed:
Let's suppose to have 3 starting environments: development (7.8), test/production replication (7.8) and production (7.8).
According to the bookshelf there's an initial phase (and this is valid for development environment too) called "upgrade infrastructure" in which they talk about "upgrading" the server, gateway, SWSE, etc. and about installing Siebel software.
For example at pag. 26 in Upgrade Guide version 8.1, during the development environment upgrade explanation, you can read:
"...Upgrade the Gateway Name Server, Siebel Servers, and Siebel Web Server Extension (SWSE).
For information upgrading these Siebel Enterprise components, see Siebel Installation Guide for the operating system you are using.
3 - Install the Siebel Database Server files on the Siebel Server you will use to perform the upgrade.
You only need to install the database server files for the database type that you are upgrading.
4 Install language packs for your currently deployed languages and any new languages...."
Now, starting with a 7.8 development environment, what do they mean: Do I need to install on the same development box (where the 7.8 already resides) also a new 8 development environment (server, gateway, etc.) in order to execute the development upgrade process?
And then, should I install another new 8 environment on the Production/Test machine, in order to perform the production/test environment?
Finally, should I use the test machine (once all is tested as the new production environment?
Probably I'm a bit confused. Can you help me?
Thank you,
Best Regards

Your upgrade process depends on how you want to carry out.
For a Inplace upgrade, whicih means you will be using the existing hardware where earlier version exists, you need to uninstall the earlier version install the new version and the kick of your siebel database upgrade.
The other process is where you obtain new hardware, in this case install new version of siebel software as per requirements and then start your siebel database upgrade. For this you may need to replicate your existing siebel database.
This process applies to all the environments.

Standby database upgrade process

Hi
I have a 11gR1 database with dataguard setup.I have successfully upgraded the primary database to 11gR2 using dbua.
Although 11gR2 software is installed on standby server,I realized archivelogs were not shipped to standby server during the database upgrade.
When I switch logfile in primary, I see below errors in standby alertlog:
RFS: 'Attach' request version mismatchWhat is the best way to sort out standby database regarding database upgrade ?
Do I need to manually add oratab entry, new pfile, etc in standby server ?
or
Do I have to rebuild DR ?

Both primary and standby compatible parameter is 11.1.0.0.0
However, rman is giving this error:
rman target sys/sys@orcl auxiliary sys/sys@orcl_std
Recovery Manager: Release 11.2.0.3.0 - Production on Sun Dec 11 08:53:34 2011
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
connected to target database: ORCL (DBID=1297219823)
Recovery Manager incompatible with AUXILIARY database: RMAN 8.0.4.0 to 11.1.0.7 required
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-06429: AUXILIARY database is not compatible with this version of RMANLike I said, after the database upgrade pirmary became 11.2.0.3, standby is still 11.1
I upgraded primary with dbua.
Do I need to mount standby from new 11.2 home , copy pwd file, add oratab entry etc ?
These were done automatically on primary via dbua

SLA Pre- upgrade programs and process and SLA Post upgrade

Hi Guys
Can anybody please let me know what are the SLA Pre- upgrade programs and process we have to run and SLA Post upgrade process and programs.
Thanks
Ajeesh

Pl post details of OS and EBS versions. Pl see if MOS Doc 604893.1 (R12: FAQ for the SLA Upgrade: SLA Pre-Upgrade, Post-Upgrade, and Hot Patch) can help
HTH
Srini

Database Upgrade to 10.2.0.4

Using Windows 2003 64-bit, 10.2.0.3 Standard Edition.
I clone the database to a spare server, shut it down immediate, and stopped all Oracle services. I installed the 10.2.0.4 patchset into the original Oracle Home without a problem. I then ran the Database Upgrade Assistant and it ran through to completion. However, it did declare a series of errors when upgrading the 'Data Mining' component:
Error ignored: ORA-29831: operator binding not found ORA-06553: PLS-306: wrong number or types of arguments in call to 'SDO_FILTER'
...and others like it. The report at the end of the process is saying the Oracle Server component is 'Successful *' -and the asterisk links to a list of the errors that I clicked 'ignore' to during the process. The one for 'data mining' says 'Skipped'.
I don't think I mind the errors about Data Mining, because as far as I know, we don't use that (are we even allowed to on an SE license?) When I look in V$OPTION, for example, we get:
OLAP Window Functions TRUE
Block Media Recovery FALSE
Fine-grained Auditing FALSE
Application Role FALSE
Enterprise User Security FALSE
Oracle Data Guard FALSE
Oracle Label Security FALSE
OLAP FALSE
Table compression FALSE
Join index FALSE
Trial Recovery FALSE
Data Mining                                                      FALSE
Online Redefinition FALSE
Streams Capture FALSE
File Mapping FALSE
So my question is: did the upgrade work properly or not?! Should I mind that the errors appeared when upgrading a component that doesn't even exist, as far as I know? Is there some way of knowing that all is as it should be?
I have logged onto the database after the upgrade and all looks fine, with queries working as expected and so on. But I just have a nagging doubt...

SQL> SELECT owner, object_type, COUNT(*)
2 FROM dba_objects
3 WHERE status = 'INVALID'
4 GROUP BY owner, object_type;
OWNER                          OBJECT_TYPE           COUNT(*)
MDSYS                          PACKAGE BODY                 1
ACC_GLOBAL                     PACKAGE BODY                 1The ACC_GLOBAL invalid is a known issue: I don't have the tnsnames.ora with the right alias for the resolution of a database link that package contains. MDSYS is not a schema we use, I think, and the package that's invalid is SDO_3GL which is the package I expected to be wrong as a result of the error messages received during the upgrade.
As for your second query:
COMP_NAME                                VERSION                        STATUS
Oracle interMedia                        10.2.0.4.0                     VALID
Oracle XML Database                      10.2.0.4.0                     VALID
Oracle Text                              10.2.0.4.0                     VALID
Oracle Data Mining                       10.2.0.3.0                     OPTION OFF
Oracle Expression Filter                 10.2.0.4.0                     VALID
Oracle Rule Manager                      10.2.0.4.0                     VALID
Oracle Workspace Manager                 10.2.0.4.3                     VALID
Oracle Database Catalog Views            10.2.0.4.0                     VALID
Oracle Database Packages and Types       10.2.0.4.0                     VALID
JServer JAVA Virtual Machine             10.2.0.4.0                     VALID
Oracle XDK                               10.2.0.4.0                     VALID
Oracle Database Java Packages            10.2.0.4.0                     VALIDDoesn't look a miserable failure to me, really. Data Mining doesn't look right, but we knew that already because of those error messages during the upgrade. Fact remains, we don't use it, it's not an option we've installed, etc etc.

IDSM-2 upgrade process questions.

Hello,
I started a new job and have been tasked with looking into what we can do with the IDSM-2 module we have in our 6509. The company has not been using the module so it hasn't been updating in a few years. I do not have a current license so I know I cannot install new signature updates, but what I would like to do is upgrade the software to version 7.0(5a)E4. Once I have it upgraded I would like to configure it in our environment and then see about getting a signature license.
I have a few questions regarding the upgrade process, and could use some assistance.
First the IDSM is currently running version 5.1(3)S256.0. From what I have read I don't believe I can go directly to 7.0(5a)E4 so my Planned Upgrade Path is: 5.1(3)S256.0 -> 5.1(8)E3 -> 7.0(5a)E4.
Am I able to upgrade this way or is there another recommended way that I should do this upgrade?
The files I have for this are below, will they be enough or am I missing any?
Do I apply them in the order listed?
Can I apply all of these files from the IDM GUI?
IPS-K9-5.1-8-E3.pkg
IPS-engine-E3-req-5.1-8.pkg <--- Is this included in the above file?
IPS-K9-r-1.1-a-5.1-8-E3.pkg
IPS-K9-7.0-5a-E4.pkg
IPS-K9-r-1.1-a-7.0-5a-E4.pkg
I plan on backing up my configuration first just in case, but should this process have any affect on the configuration?
I also saw that the upgrade will convert the configuration, so should I back it up a second time between the 5.1(8)E3 and 7.0(5a)E4 step?
Will there be any effect on network traffic or downtime during this process?
Is there any thing else I need to be aware of or that I'm missing?
Thanks in advance,
Will

Hi Will. Since you indicated that this sensor has not been in-use, it would be quickest/easiest to simply re-image it directly to the desired version (7.0(5a)E4). Additional benefits of doing this are that the sensor's filesystem will be created clean, OS/binaries cleanly installed, no potential config conversion issues, etc.
Step-by-step instructions for doing this can be found here.
And, the System Recovery Image file you will need ('IPS-IDSM2-K9-sys-1.1-a-7.0-5a-E4.bin.gz') can be downloaded here.
Will there be any effect on network traffic or downtime during this process?
That depends on whether the sensor is configured in Promiscuous Mode or Inline [VLAN Pair] Mode. You can determine this from the Catalyst config. If the sensor is installed in Inline [VLAN Pair] Mode, then certainly the re-image (and even just upgrade) could be traffic-impacting (if there is no alternative/backup path for traffic to take), as in both scenarios, the sensor is rebooted and not available for ~10 minutes (during which time, it would not be forwarding traffic (if it were installed Inline)). Additionally, since re-imaging results in a clean/default config, if the sensor were configured Inline, that portion of the config would have to be re-input post-reimage so that the sensor would know to forward traffic accordingly again. Details about the modes can be found here.

How do I update Adobe as per my previous question. I have followed the 3 step process. Step one and Two fine but step 3 just directs me to purchase and application. I want the "Free" upgrade. How do I get It. ????????

How do I update Adobe as per my previous question. I have followed the 3 step process. Step one and Two fine but step 3 just directs me to purchase and application. I want the "Free" upgrade. How do I get It. ????????

YouTube does not use Adobe Reader. Videos do not use Adobe Reader.
Adobe Reader is used only to show files in a special format called "PDF".
What you are having problems with is probably Adobe Flash Player.
So, if you are trying to solve problems with Adobe Flash Player by downloading Adobe Reader, or even Adobe Acrobat, it isn't going to help you in the end. Is that what is happening (we can't really tell without screen pictures, but it seems a likely guess).

11.5.10.2 12.1.1 and 10g 11g database upgrade at same time

I have just started an 11.5.10.2 > 12.1.1 upgrade and have created a project in MWIZ 2.15 for it.
I would also like to upgrade the 10.2.0.2 database to 11.1.0.7 as part of the same upgrade and create an MWIZ project for that.
I have a couple of questions that the MWIZ FAQ does not address:
1. At what point in the 11.5.10.2 > 12.1.1 upgrade should I do the database upgrade?
MWIZ has two points when it can be done based on apps/database versions. One is at the end of the 'Prep for Upgrade' category and the other is during the 'Upg to Rel 12.1.1' category. The MWIZ step notes cover upgrading to the latest 10g or 11g patch version but not upgrading from 10g to 11g so I am unsure which category to go for.
2. When I create the database upgrade project which 'Destination Version' should I choose?
The two options are 'RDBMS 11.1 and E-Business Suite 11.5' and 'RDBMS 11.1 and E-Business Suite 12'.
As I haven't upgraded to R12 yet and am still at the pre-upgrade stage should I pick 11.5? Or should I go with R12 because I am upgrading Apps and the database at the same time?
Any help and advice gratefully received.
Thanks

Answer to above question not required now as:
Having read the 24th December update of note 761570.1 - 'Database Preparation Guidelines for an Oracle E-Business Suite Release 12.1.1 Upgrade' I have decided to upgrade the database to 11.2.0.x by following the Path C option.
Unfortunately as the 11.2.0.x upgrade isn't covered by MWIZ yet I will have to follow the manual steps.

SAPINST failed step "Install Oracle Database (post processing)"

i will install ep6.0 with oracle database 9.2.0.4 on sun solaris.
the SAPINST failed at the step "Install Oracle Database (post processing) with follow error.
the oui - installer (runinstaller) finished sucessfully.
ERROR 2004-08-31 16:05:17
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-01501: CREATE DATABASE failedORA-01101: database being created currently mounted by some other instance
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
With the Partitioning optionJServer Release 9.2.0.4.0 - Production. SOLUTION: See ora_sql_results.log and the Oracle documentation for details.
no user is logged on the Database. Database is not running (is shutdowned and unmounted). No Oracle process is running.
pleas help.
thanks
armin hadersbeck

Hi Armin,
We're going to install EP 6 stack3 with Oracle 9.2.0.4 and Solaris 9. We have exactly the same error as you during sapinst.
How do you solved that ?
Thanks a lot for your help,
Regards from Mexico,
Diego

When I open iTunes , iTunes Match started to process step 1. Always same process and never ending

When I open iTunes , iTunes Match started to process step 1. Always same process and never ending...
I tried some suggestions but I cant fix my problem. Do you have any knowladge about this problem?

For the past few months, and several iTunes upgrades, iTunes Match spends some time in Step 1 "Gathering" and sending information to Apple. Then Step 2 runs through the first 2092 of 2094 pretty quickly. Jumps to 2094. And then immediatly back to Step 1 again.
Repeat every 5 minutes or so until Match is manually turned off.

After upgrading my iPhone, I lost all my contacts..... and they were replaced with my wife's contacts even though she upgraded after I did. I did a time machine backup before I started the upgrade process, how do I get that saved data back to my phone?

After upgrading my iPhone, I lost all my contacts and they were replaced with my wife's contacts even though she upgraded after I did. I did a time machine backup before I started the upgrade process, how do I get that saved data back to my phone?

Hi bluegrandpanash,
Thanks for visiting Apple Support Communities.
If you backed up your iPhone to iCloud before updating the software, first try the steps under "Restore from an iCloud backup" in this article to recover your data:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Best Regards,
Jeremy

How can I determine what sites are being referenced within Central Admin Upgrade and Migration Manage Databases Upgrade Status?

When I go to Central Admin > Upgrade and Migration > Manage Databases Upgrade Status, I have 2 content databases which have the status:
Database is up to date, but some sites are not completely upgraded.
How can I determine which sites are not completely upgraded?

Manage Databases Upgrade Status will provide you all active and offline DB details, you can get same result
using below PowerShell cmdlet.
Get-SPDatabase and Get-SPContentDatabase will provide all active database/Content DB in Farm which include Service application db, central admin DB.
Get-SPDatabase | Format-Table Name, ID
Coming back to your question, if you find that there are some site are not completely upgraded then run below command and understand the cause if issue on specific DB.
Test-SPContentDatabase WSS_ContentDB_Name
If you find any missing file issue in DB then resolve these issue to upgrade content database.
(verify all customizations referenced within the content database are also installed in the web application. This cmdlet can be issued
against a content database currently attached to the farm, or a content database that is not connected to the farm )
Use the Upgrade-SPContentDatabase cmdlet
to resume a failed database upgrade or begin a build-to-build database upgrade against a SharePoint content database
Upgrade-SPContentDatabase WSS_Content
reference:
http://technet.microsoft.com/en-us/library/ff607813(v=office.15).aspx
http://technet.microsoft.com/en-us/library/ff607941(v=office.15).aspx
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP)

Error in process Chain at 'AND' Step

Hi,
I have a Process chain which has different process which are activating different DSO's plus a loading data to a DSO in same level of Process chain. Now the next process is AND step, which will be executed if all the above process are successful.
Now all the activation step are sucess and also loading the DSO, but still there is a error in AND step. Error message is 'Job cancelled after system exception ERROR_MESSAGE'. And one more thing is the previous step of DSO loading data loaded successfully, but in details tab, Last step is showing the message as 'Process Chains: Errors Occured'. But the data is transferred and added in the target.
Please suggest what will be the cause for this error.
Regards,
Vishnu
Edited by: Vishnuvadhan K on May 9, 2008 9:12 AM

Hi,
you are talking about monitor details tab or process chain details tab?
'Process Chain: errors occured". you will get this msg at monitor details tab bcoz data has been loaded to ODS through process chian, even the load is successful but the chain is not yet completed successfully. so once the chain is success this msg will trun to green. try to figure about the error and rectify it.
did you repeate the AND process to execute next process in process chian.
if you didnt get repeate option you can try with RSPC_PROCESS_FINISH in SE37.

I am syncing my iPhone now, and step 6 of 6 is taking significantly longer than it usually does. Is there a way to tell how long it will take, or complete the process?

I am syncing my iPhone now, and step 6 of 6 is taking significantly longer than it usually does. Is there a way to tell how long it will take, or complete the process?

Warp Stabilising is a two part process.
Analysis and Stabilising.
Both have a banner across the Program Monitor during the process ( unless you have turned that off.
Analysis start automatically on forst application...but you can rock in there and start adjusting the parameters.
You may need to hit "Analyse" Button again.
You should see the number of frames and the estimated duration during this process.

Database upgrade process and step

Similar Messages

Maybe you are looking for