Dataguard connection
Hi all,
i configured dataguard in high protection mode. Now all the users are connecting to primary database.
Primary netservice name is prim and standby netservice name is stand,
Now if we switch over this primary database to standby and standby to primary to which database users are going to connect. how they connect to current primary database (previously it was standby).
How application will connect to the primary database (previously it was standby). all the applications will be using prim netservice name right...? what would be stuff from dba's end.
Please let me know.
Thank you!
i configured dataguard in high protection mode. Now all the users are connecting to primary database.
Primary netservice name is prim and standby netservice name is stand,
Now if we switch over this primary database to standby and standby to primary to which database users are going to connect. how they connect to current primary database (previously it was standby).
How application will connect to the primary database (previously it was standby). all the applications will be using prim netservice name right...? what would be stuff from dba's end.When you perform switchover, then you have to update your TNS entries to all the client machine as they should point it to new Primary database(old standby)
Answer:- Update TNS entries.
There is another option with observer, in case if you configure FSFO if primary goes down according to the service configured it will connects to standby in case of falivoer. Client connections will be automatically connected to standby. Its an option of observer(fsfo/broker)
further if any queries related to Dataguard, please post in Oracle Discussion Forums » High Availability » Data Guard its an dedicated forum for High Availability/Data Guard.
Thanks.
Edited by: CKPT on Jun 12, 2012 11:05 AM
Similar Messages
-
Oracle 10g dataguard Connect-time failover Parameter 15 minutes
Hello,
we running a system with DataGuard in Maximum Availability protection mode and one physical Standby Database. There are two connections between primary and standby. I configured listener and tnsnames to perform a Connect-time failover in case one connection is down. In first place it seemed to work fine but since it has happened that the primary always hangs for exactly 15 minutes until the failover is performed. (ALL redologs need archiving)
I think this must be the default value of a Parameter but reading docs for hours I can't find it.
Can anybody help me?
Best regards
FritzIt's like this. The connection failover I'm talking about is only between the primary database and standby database. I have two connections between them. That makes two addresses for the service (servicetostandby) specified in the log_archive_dest used by dataguard. In my case the log_archive_dest Paramater looks like this:
log_archive_dest_3 = 'SERVICE servicetostandby OPTIONAL LGWR SY
NC AFFIRM VALID_FOR=(ONLINE_LO
GFILES,PRIMARY_ROLE) DB_UNIQUE
NAME=standby REOPEN=10 NETTIME
OUT=9'
The tnsnames.ora entry looks like this:
servicetostandby =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = address1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = address2)(PORT = 1521))
(FAILOVER=true)
(LOAD_BALANCE=false)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = standby)
So if either address1 or address2 is down dataguard should use the other address to connect to the standby database.
Maybe because of the Maximum Availability protection mode the primary database does not perform if the standby database is not available. I'm not sure about that. But fact is that if I power off the standby database, the primary database hangs only for 9 seconds. That's specified in the net_time_out attribut of the log_archive_dest Parameter. So I'm quite sure that something in the oracle net service causes the problem.
With the "primary hangs" I mean: After the used connection (say address1) went down the redologfiles of the primary database get filled and then it stops for 15 minutes. The messages in the alert.log:
Thread 1 cannot allocate new log, sequence 1304
All online logs needed archiving
After 15 minutes the connection via address2 is established and everything works fine.
I hope I made myself clear this time and didn't confuse you totally.
Edited by: user633694 on Apr 14, 2009 8:13 AM -
Having dataguard connect to the open database.
Does any have docs on setting up teh listener and tnsnames so when a switch over occurs teh client is bounced to the correct server? This information is very elusive.. here is what I have
10GR2 on RH linux 4.3
I have dgmgrl able to switch back and forth easily. I have PROD and PROD_s
My question is - what is the correct client tnsnames entry and server listeners? If I have switched
PROD over to Linux2- using the stanza below, my client connection will connect
to PROD_s in mounted state.
PROD=
(DESCRIPTION=
(ADDRESS_LIST=
(LOAD_BALANCE=off)
(FAILOVER=ON)
(ADDRESS=(PROTO =tcp)(HOST=Linux1)(PORT=1521))
(ADDRESS=(PROTO =tcp)(HOST=Linux2)(PORT=1521)))
(CONNECT_DATA=(SERVICE_NAME=PROD)))
I need to know- how the client request can detect the db is in mounted state,
and then failover to the alternate server with the active database is.
Essentially I need the correct failover client tns stanza. Having two separate
net service names will not work in an environment with hundreds of users. I
have checked all the documentation and the net service configuration is sketchy
at best.
I appreciate your help in getting the right configuration.
A few more details – on both servers my PMON process is broadcasting PROD. I
have the db_unique_name being prod on one -- and prod_s for the standby
thanks
BobPROD over to Linux2- using the stanza below, my
client connection will connect
to PROD_s in mounted state.what version? could be helpful.
I need to know- how the client request can detect the
db is in mounted state,
and then failover to the alternate server with the
active database is.he can't. TAF doesn't apply in this case because the client gets a connect but no login.
fortunately there's a solution, see below.
Essentially I need the correct failover client tns
stanza. Having two separate
net service names will not work in an environment
with hundreds of users. Iuse service_names. create a service for your application and start the service only on the primary.
a switchover sequence is then as follows:
1. stop service_name on all nodes
2. switchover
3. start service on primary
if you want it nice and pretty you can create a database startup trigger which checks v$database.database_role and issues 'alter system set service_name ...' only if database_role is primary. a database shutdown trigger could be used to stop the service but it's not absolutely necessary.
it's easy to implement and works very well.
A few more details – on both servers my PMON process
is broadcasting PROD. I
have the db_unique_name being prod on one -- and
prod_s for the standbythat's ok, primary and standby have the same dbname, only db_unique_name differs.
regards,
-ap -
How to configure oracle dataguard for connecting to the second nic.
hi
i want deploy my oracle dataguard on a remote site on a separate lease line
and on the second nic of the primary. i just have a concern that what
configurations should be made in the primary or standby to make sure the replication can work as the first nic is connected to receive the general database
data and the second nic is being planned for replication only.
so how standby will come to know that it has to pick which one of then.
waiting for an early reply
manish lall
[email protected]thanks for the reply
does that mean nothing is to be needed to configure for oracle standby as such.
can you give me some idea of how this ip routing configuration will be done -
Dataguard switch over connection
Hi all,
suppose we configured dataguard in high protection mode. Now all the users are connecting to primary database.
Primary netservice name is prim and standby netservice name is stand,
Now if we switch over this primary database to standby and standby to primary to which database users are going to connect. how they connect to current primary database (previously it was standby).
How application will connect to the primary database (previously it was standby). all the applications will be using prim netservice name right...? what would be stuff from dba's end.
Please let me know.
Thank you!Hi;
There is seeded dg forum site. For your future issue i suggest close your thread here as changing thread status to answered and move it to Oracle Discussion Forums » High Availability » Data Guard which you can get more quick response
Regard
Helios -
What kind of net connection should I have for a DataGuard system?
I want to construct a DataGuard system on 3 PCs( all with the RHEL5.0 OS and just for test purpose). But I don't know what kind of connection should I make between the 3 PCs? Shoud I use a router?
Thank you for any answer.You don't really need a router for this testing.
a simple back to back connection would work.
or a hub even.
routers tend to get more expensive.
jason.
http://jarneil.wordpress.com -
Ora-12514 connect to SCAN listener in dataguard RAC environment
I have two rac nodes datase on linux and two rac standby database also.
Here are what I got when I try to connect to scan listener from client. It connects to vip/or scan ip addresses without any problem.
sqlplus system/password@wxcy
SQL*Plus: Release 10.2.0.3.0 - Production on Wed Mar 14 18:42:42 2012
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
But when I log in to the ip address of the scan listener, it worked:
sqlplus system/[email protected]:1521/wxcy
SQL*Plus: Release 10.2.0.3.0 - Production on Wed Mar 14 18:43:12 2012
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options
SQL>
Here is the tnsnames.ora on the client:
wxcy =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)
(HOST = scan.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = wxcy)
Here are listener.ora and tnsnames.ora on the server:
LISTENER=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))) # line added by Agent
LISTENER_SCAN3=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN3)))) # line added by Agent
LISTENER_SCAN2=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN2)))) # line added by Agent
LISTENER_SCAN1=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN1)))) # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN2=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN3=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER=ON # line added by Agent
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = wxcy_DGMGRL)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = wxcy1)
SID_LIST_LISTENER_SCAN1 =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = wxcy)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = wxcy1)
SID_LIST_LISTENER_SCAN3 =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = wxcy)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = wxcy1)
INBOUND_CONNECT_TIMEOUT_LISTENER = 120
~
tnsnames.ora:
wxcy =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = scan.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = wxcy)
wxcy_DGMGRL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = scan.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = wxcy_DGMGRL)
wxcy1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = scan.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)(SERVICE_NAME = wxcy)
(INSTANCE_NAME = wxcy1)
wxcy2 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = scan.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)(SERVICE_NAME = wxcy)
(INSTANCE_NAME = wxcy2)
From node 2:
LISTENER_SCAN2=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN2)))) # line added by Agent
LISTENER_SCAN3=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN3)))) # line added by Agent
LISTENER=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))) # line added by Agent
LISTENER_SCAN1=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN1)))) # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN3=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN2=ON # line added by Agent
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = wxcy_DGMGRL)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = wxcy1)
SID_LIST_LISTENER_SCAN2 =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = wxcy)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = wxcy2)
SID_LIST_LISTENER_SCAN3 =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = wxcy)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = wxcy2)
I wonder why I can connect to the ip addresses of those scan listener but not the scan name.
Thanks.Hello;
This note may help :
How to Troubleshoot Connectivity Issue with 11gR2 SCAN Name [ID 975457.1]
Also I would check my DNS ( OK double check ) and each listener service as follows :
lsnrctl service LISTENER_SCAN1
( and so on )
Also
Make sure a password file exists on on that node. ( A copy - Create new with Oracle 11 DG does not work )
Best Regards
mseberg
Edited by: mseberg on Mar 14, 2012 5:10 PM -
Error in Creation of Dataguard for RAC
My pfile of RAC looks like:
RACDB2.__large_pool_size=4194304
RACDB1.__large_pool_size=4194304
RACDB2.__shared_pool_size=92274688
RACDB1.__shared_pool_size=92274688
RACDB2.__streams_pool_size=0
RACDB1.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/RACDB/adump'
*.background_dump_dest='/u01/app/oracle/admin/RACDB/bdump'
*.cluster_database_instances=2
*.cluster_database=true
*.compatible='10.2.0.1.0'
*.control_files='+DATA/racdb/controlfile/current.260.627905745','+FLASH/racdb/controlfile/current.256.627905753'
*.core_dump_dest='/u01/app/oracle/admin/RACDB/cdump'
*.db_block_size=8192
*.db_create_file_dest='+DATA'
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='+DATA/RACDB','+DATADG/RACDG'
*.db_name='RACDB'
*.db_recovery_file_dest='+FLASH'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=RACDBXDB)'
*.fal_client='RACDB'
*.fal_server='RACDG'
RACDB1.instance_number=1
RACDB2.instance_number=2
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(RACDB,RACDG)'
*.log_archive_dest_1='LOCATION=+FLASH/RACDB/ VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=RACDB'
*.log_archive_dest_2='SERVICE=RACDG VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=RACDG'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='DEFER'
*.log_archive_format='%t_%s_%r.arc'
*.log_file_name_convert='+DATA/RACDB','+DATADG/RACDG'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_listener='LISTENERS_RACDB'
*.remote_login_passwordfile='exclusive'
*.service_names='RACDB'
*.sga_target=167772160
*.standby_file_management='AUTO'
RACDB2.thread=2
RACDB1.thread=1
*.undo_management='AUTO'
RACDB2.undo_tablespace='UNDOTBS2'
RACDB1.undo_tablespace='UNDOTBS1'
*.user_dump_dest='/u01/app/oracle/admin/RACDB/udump'
My pfile of Dataguard Instance in nomount state looks like:
RACDG.__db_cache_size=58720256
RACDG.__java_pool_size=4194304
RACDG.__large_pool_size=4194304
RACDG.__shared_pool_size=96468992
RACDG.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/RACDG/adump'
*.background_dump_dest='/u01/app/oracle/admin/RACDG/bdump'
##*.cluster_database_instances=2
##*.cluster_database=true
*.compatible='10.2.0.1.0'
##*.control_files='+DATA/RACDG/controlfile/current.260.627905745','+FLASH/RACDG/controlfile/current.256.627905753'
*.core_dump_dest='/u01/app/oracle/admin/RACDG/cdump'
*.db_block_size=8192
*.db_create_file_dest='+DATADG'
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='+DATADG/RACDG','+DATA/RACDB'
*.db_name='RACDB'
*.db_recovery_file_dest='+FLASHDG'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=RACDGXDB)'
*.FAL_CLIENT='RACDG'
*.FAL_SERVER='RACDB'
*.job_queue_processes=10
*.LOG_ARCHIVE_CONFIG='DG_CONFIG=(RACDB,RACDG)'
*.log_archive_dest_1='LOCATION=+FLASHDG/RACDG/ VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=RACDG'
*.log_archive_dest_2='SERVICE=RACDB VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=RACDB'
*.LOG_ARCHIVE_DEST_STATE_1='ENABLE'
*.LOG_ARCHIVE_DEST_STATE_2='ENABLE'
*.log_archive_format='%t_%s_%r.arc'
*.log_file_name_convert='+DATADG/RACDG','+DATA/RACDB'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
##*.remote_listener='LISTENERS_RACDG'
*.remote_login_passwordfile='exclusive'
SERVICE_NAMES='RACDG'
sga_target=167772160
standby_file_management='auto'
undo_management='AUTO'
undo_tablespace='UNDOTBS1'
user_dump_dest='/u01/app/oracle/admin/RACDG/udump'
DB_UNIQUE_NAME=RACDG
and here is what I am doing on the standby location:
[oracle@dg01 ~]$ echo $ORACLE_SID
RACDG
[oracle@dg01 ~]$ rman
Recovery Manager: Release 10.2.0.1.0 - Production on Tue Jul 17 21:19:21 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN> connect auxiliary /
connected to auxiliary database: RACDG (not mounted)
RMAN> connect target sys/xxxxxxx@RACDB
connected to target database: RACDB (DBID=625522512)
RMAN> duplicate target database for standby;
Starting Duplicate Db at 2007-07-17 22:27:08
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: sid=156 devtype=DISK
contents of Memory Script:
restore clone standby controlfile;
sql clone 'alter database mount standby database';
executing Memory Script
Starting restore at 2007-07-17 22:27:10
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backupset restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /software/backup/ctl4.ctl
channel ORA_AUX_DISK_1: restored backup piece 1
piece handle=/software/backup/ctl4.ctl tag=TAG20070717T201921
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:23
output filename=+DATADG/racdg/controlfile/current.275.628208075
output filename=+FLASHDG/racdg/controlfile/backup.268.628208079
Finished restore at 2007-07-17 22:27:34
sql statement: alter database mount standby database
released channel: ORA_AUX_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/17/2007 22:27:43
RMAN-05501: aborting duplication of target database
RMAN-05001: auxiliary filename +DATA/racdb/datafile/undotbs2.265.627906771 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +DATA/racdb/datafile/example.264.627905917 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +DATA/racdb/datafile/users.259.627905395 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +DATA/racdb/datafile/sysaux.257.627905385 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +DATA/racdb/datafile/undotbs1.258.627905395 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +DATA/racdb/datafile/system.256.627905375 conflicts with a file used by the target database
RMAN>
Any help to clear this error will be apprecited.......
Message was edited by:
Bal
nullHi
Thanks everybody for helping me on this issue...........
As suggested, I had taken the parameter log_file_name_convert and db_file_name_convert out of my RAC primary database but still I am getting the same error.
Any help will be appriciated..............
SQL> show parameter convert
NAME TYPE VALUE
db_file_name_convert string
log_file_name_convert string
SQL>
oracle@dg01<3>:/u01/app/oracle> rman
Recovery Manager: Release 10.2.0.1.0 - Production on Wed Jul 18 17:07:49 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN> connect auxiliary /
connected to auxiliary database: RACDB (not mounted)
RMAN> connect target sys/xxx@RACDB
connected to target database: RACDB (DBID=625522512)
RMAN> duplicate target database for standby;
Starting Duplicate Db at 2007-07-18 17:10:53
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: sid=156 devtype=DISK
contents of Memory Script:
restore clone standby controlfile;
sql clone 'alter database mount standby database';
executing Memory Script
Starting restore at 2007-07-18 17:10:54
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backupset restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /software/backup/ctl5.ctr
channel ORA_AUX_DISK_1: restored backup piece 1
piece handle=/software/backup/ctl5.ctr tag=TAG20070718T170529
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:33
output filename=+DATADG/racdg/controlfile/current.275.628208075
output filename=+FLASHDG/racdg/controlfile/backup.268.628208079
Finished restore at 2007-07-18 17:11:31
sql statement: alter database mount standby database
released channel: ORA_AUX_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/18/2007 17:11:43
RMAN-05501: aborting duplication of target database
RMAN-05001: auxiliary filename +DATA/racdb/datafile/undotbs2.265.627906771 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +DATA/racdb/datafile/example.264.627905917 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +DATA/racdb/datafile/users.259.627905395 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +DATA/racdb/datafile/sysaux.257.627905385 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +DATA/racdb/datafile/undotbs1.258.627905395 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +DATA/racdb/datafile/system.256.627905375 conflicts with a file used by the target database -
Hi everybody!
I have a problem. Some weeks ago I opened a post related to this issue. We have two dataguards with dataguard broker. One of them is resync (thanks to mseberg and this forum) and now I have problems with the other.
Once I have learned how to configure and start/stop dataguard broker, I have a more basic problem, which is to resync it. I follow a process, where I backup the primary with RMAN, I copy the rman files to the other server with the controlfile, at once, I recover with rman again.
The problem is that it is too big, 2 hours for backing it up more or less, and when I restore it, no archivelog list appears being syncronized.
I have followed the same process than the other one and I can't resync it. I think there is something at my params or something new at 11g version...
SQL> show parameters
NAME TYPE VALUE
O7_DICTIONARY_ACCESSIBILITY boolean FALSE
active_instance_count integer
aq_tm_processes integer 0
archive_lag_target integer 0
asm_diskgroups string
asm_diskstring string
asm_power_limit integer 1
asm_preferred_read_failure_groups string
audit_file_dest string /opt/oracle/admin/MN122010P/ad
ump
audit_sys_operations boolean FALSE
audit_syslog_level string
audit_trail string DB
background_core_dump string partial
background_dump_dest string /opt/oracle/diag/rdbms/mn12201
0p/MN122010P/trace
backup_tape_io_slaves boolean FALSE
bitmap_merge_area_size integer 1048576
blank_trimming boolean FALSE
buffer_pool_keep string
buffer_pool_recycle string
cell_offload_compaction string ADAPTIVE
cell_offload_parameters string
cell_offload_plan_display string AUTO
cell_offload_processing boolean TRUE
cell_partition_large_extents string DEFAULT
circuits integer
client_result_cache_lag big integer 3000
client_result_cache_size big integer 0
cluster_database boolean FALSE
cluster_database_instances integer 1
cluster_interconnects string
commit_logging string
commit_point_strength integer 1
commit_wait string
commit_write string
compatible string 11.1.0.0.0
control_file_record_keep_time integer 7
control_files string /opt/oracle/oradata/MN122010P/
controlfile/control01.ctl, /op
t/oracle/oradata1/MN122010P/co
ntrolfile/control02.ctl
control_management_pack_access string DIAGNOSTIC+TUNING
core_dump_dest string /opt/oracle/diag/rdbms/mn12201
0p/MN122010P/cdump
cpu_count integer 4
create_bitmap_area_size integer 8388608
create_stored_outlines string
cursor_sharing string EXACT
cursor_space_for_time boolean FALSE
db_16k_cache_size big integer 0
db_2k_cache_size big integer 0
db_32k_cache_size big integer 0
db_4k_cache_size big integer 0
db_8k_cache_size big integer 0
db_block_buffers integer 0
db_block_checking string FALSE
db_block_checksum string TYPICAL
db_block_size integer 8192
db_cache_advice string ON
db_cache_size big integer 0
db_create_file_dest string /opt/oracle/oradata
db_create_online_log_dest_1 string /opt/oracle/oradata
db_create_online_log_dest_2 string /opt/oracle/oradata1
db_create_online_log_dest_3 string
db_create_online_log_dest_4 string
db_create_online_log_dest_5 string
db_domain string domain.es
db_file_multiblock_read_count integer 69
db_file_name_convert string
db_files integer 200
db_flashback_retention_target integer 1440
db_keep_cache_size big integer 0
db_lost_write_protect string NONE
db_name string MN122010
db_recovery_file_dest string /opt/oracle/oradata/flash_reco
very_area
db_recovery_file_dest_size big integer 100G
db_recycle_cache_size big integer 0
db_securefile string PERMITTED
db_ultra_safe string OFF
db_unique_name string MN122010P
db_writer_processes integer 1
dbwr_io_slaves integer 0
ddl_lock_timeout integer 0
dg_broker_config_file1 string /opt/oracle/product/db111/dbs/
dr1MN122010P.dat
dg_broker_config_file2 string /opt/oracle/product/db111/dbs/
dr2MN122010P.dat
dg_broker_start boolean FALSE
diagnostic_dest string /opt/oracle
disk_asynch_io boolean TRUE
dispatchers string (PROTOCOL=TCP) (SERVICE=MN1220
10PXDB)
distributed_lock_timeout integer 60
dml_locks integer 844
drs_start boolean FALSE
enable_ddl_logging boolean FALSE
event string
fal_client string
fal_server string
fast_start_io_target integer 0
fast_start_mttr_target integer 0
fast_start_parallel_rollback string LOW
file_mapping boolean FALSE
fileio_network_adapters string
filesystemio_options string none
fixed_date string
gc_files_to_locks string
gcs_server_processes integer 0
global_context_pool_size string
global_names boolean FALSE
global_txn_processes integer 1
hash_area_size integer 131072
hi_shared_memory_address integer 0
hs_autoregister boolean TRUE
ifile file
instance_groups string
instance_name string MN122010P
instance_number integer 0
instance_type string RDBMS
java_jit_enabled boolean TRUE
java_max_sessionspace_size integer 0
java_pool_size big integer 0
java_soft_sessionspace_limit integer 0
job_queue_processes integer 1000
large_pool_size big integer 0
ldap_directory_access string NONE
ldap_directory_sysauth string no
license_max_sessions integer 0
license_max_users integer 0
license_sessions_warning integer 0
local_listener string LISTENER_MN122010P
lock_name_space string
lock_sga boolean FALSE
log_archive_config string dg_config=(MN122010P,MN122010R
,MN12201R)
log_archive_dest string
log_archive_dest_1 string location="USE_DB_RECOVERY_FILE
_DEST", valid_for=(ALL_LOGFIL
ES,ALL_ROLES)
log_archive_dest_10 string
log_archive_dest_2 string service=MN12201R, LGWR SYNC AF
FIRM delay=0 OPTIONAL compress
ion=DISABLE max_failure=0 max_
connections=1 reopen=300 db_
unique_name=MN12201R net_timeo
ut=30 valid_for=(online_logfi
le,primary_role)
log_archive_dest_3 string
log_archive_dest_4 string
log_archive_dest_5 string
log_archive_dest_6 string
log_archive_dest_7 string
log_archive_dest_8 string
log_archive_dest_9 string
log_archive_dest_state_1 string ENABLE
log_archive_dest_state_10 string enable
log_archive_dest_state_2 string ENABLE
log_archive_dest_state_3 string ENABLE
log_archive_dest_state_4 string enable
log_archive_dest_state_5 string enable
log_archive_dest_state_6 string enable
log_archive_dest_state_7 string enable
log_archive_dest_state_8 string enable
log_archive_dest_state_9 string enable
log_archive_duplex_dest string
log_archive_format string %t_%s_%r.dbf
log_archive_local_first boolean TRUE
log_archive_max_processes integer 4
log_archive_min_succeed_dest integer 1
log_archive_start boolean FALSE
log_archive_trace integer 0
log_buffer integer 7668736
log_checkpoint_interval integer 0
log_checkpoint_timeout integer 1800
log_checkpoints_to_alert boolean FALSE
log_file_name_convert string
max_commit_propagation_delay integer 0
max_dispatchers integer
max_dump_file_size string unlimited
max_enabled_roles integer 150
max_shared_servers integer
memory_max_target big integer 512M
memory_target big integer 512M
nls_calendar string
nls_comp string BINARY
nls_currency string
nls_date_format string
nls_date_language string
nls_dual_currency string
nls_iso_currency string
nls_language string AMERICAN
nls_length_semantics string BYTE
nls_nchar_conv_excp string FALSE
nls_numeric_characters string
nls_sort string
nls_territory string AMERICA
nls_time_format string
nls_time_tz_format string
nls_timestamp_format string
nls_timestamp_tz_format string
object_cache_max_size_percent integer 10
object_cache_optimal_size integer 102400
olap_page_pool_size big integer 0
open_cursors integer 300
open_links integer 4
open_links_per_instance integer 4
optimizer_capture_sql_plan_baselines boolean FALSE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 11.1.0.7
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
optimizer_secure_view_merging boolean TRUE
optimizer_use_invisible_indexes boolean FALSE
optimizer_use_pending_statistics boolean FALSE
optimizer_use_sql_plan_baselines boolean TRUE
os_authent_prefix string ops$
os_roles boolean FALSE
parallel_adaptive_multi_user boolean TRUE
parallel_automatic_tuning boolean FALSE
parallel_execution_message_size integer 2152
parallel_instance_group string
parallel_io_cap_enabled boolean FALSE
parallel_max_servers integer 40
parallel_min_percent integer 0
parallel_min_servers integer 0
parallel_server boolean FALSE
parallel_server_instances integer 1
parallel_threads_per_cpu integer 2
pga_aggregate_target big integer 0
plscope_settings string IDENTIFIERS:NONE
plsql_ccflags string
plsql_code_type string INTERPRETED
plsql_debug boolean FALSE
plsql_native_library_dir string
plsql_native_library_subdir_count integer 0
plsql_optimize_level integer 2
plsql_v2_compatibility boolean FALSE
plsql_warnings string DISABLE:ALL
pre_page_sga boolean FALSE
processes integer 170
query_rewrite_enabled string TRUE
query_rewrite_integrity string enforced
rdbms_server_dn string
read_only_open_delayed boolean FALSE
recovery_parallelism integer 0
recyclebin string on
redo_transport_user string
remote_dependencies_mode string TIMESTAMP
remote_listener string
remote_login_passwordfile string EXCLUSIVE
remote_os_authent boolean FALSE
remote_os_roles boolean FALSE
replication_dependency_tracking boolean TRUE
resource_limit boolean FALSE
resource_manager_cpu_allocation integer 4
resource_manager_plan string
result_cache_max_result integer 5
result_cache_max_size big integer 1312K
result_cache_mode string MANUAL
result_cache_remote_expiration integer 0
resumable_timeout integer 0
rollback_segments string
sec_case_sensitive_logon boolean TRUE
sec_max_failed_login_attempts integer 10
sec_protocol_error_further_action string CONTINUE
sec_protocol_error_trace_action string TRACE
sec_return_server_release_banner boolean FALSE
serial_reuse string disable
service_names string MN122010P.domain.es
session_cached_cursors integer 50
session_max_open_files integer 10
sessions integer 192
sga_max_size big integer 512M
sga_target big integer 0
shadow_core_dump string partial
shared_memory_address integer 0
shared_pool_reserved_size big integer 10066329
shared_pool_size big integer 0
shared_server_sessions integer
shared_servers integer 1
skip_unusable_indexes boolean TRUE
smtp_out_server string
sort_area_retained_size integer 0
sort_area_size integer 65536
spfile string /opt/oracle/product/db111/dbs/
spfileMN122010P.ora
sql92_security boolean FALSE
sql_trace boolean FALSE
sql_version string NATIVE
sqltune_category string DEFAULT
standby_archive_dest string ?/dbs/arch
standby_file_management string AUTO
star_transformation_enabled string FALSE
statistics_level string TYPICAL
streams_pool_size big integer 0
tape_asynch_io boolean TRUE
thread integer 0
timed_os_statistics integer 0
timed_statistics boolean TRUE
trace_enabled boolean TRUE
tracefile_identifier string
transactions integer 211
transactions_per_rollback_segment integer 5
undo_management string AUTO
undo_retention integer 900
undo_tablespace string UNDOTBS1
use_indirect_data_buffers boolean FALSE
user_dump_dest string /opt/oracle/diag/rdbms/mn12201
0p/MN122010P/trace
utl_file_dir string
workarea_size_policy string AUTO
xml_db_events string enable
I have tested the connectivity between them and it's ok, I recreated the password file
[oracle@servername01 MN122010P]$ sqlplus "sys/[email protected] as sysdba"
SQL> select * from v$instance;
INSTANCE_NUMBER INSTANCE_NAME
HOST_NAME
VERSION STARTUP_T STATUS PAR THREAD# ARCHIVE LOG_SWITCH_WAIT
LOGINS SHU DATABASE_STATUS INSTANCE_ROLE ACTIVE_ST BLO
1 MN122010P
servername01
11.1.0.7.0 09-OCT-11 OPEN NO 1 STARTED
ALLOWED NO ACTIVE PRIMARY_INSTANCE NORMAL NO
[oracle@servername01 MN122010P]$ sqlplus "sys/[email protected] as sysdba"
SQL> select * from v$instance;
INSTANCE_NUMBER INSTANCE_NAME
HOST_NAME
VERSION STARTUP_T STATUS PAR THREAD# ARCHIVE LOG_SWITCH_WAIT
LOGINS SHU DATABASE_STATUS INSTANCE_ROLE ACTIVE_ST BLO
1 MN12201R
servername02
11.1.0.7.0 28-NOV-11 MOUNTED NO 1 STARTED
ALLOWED NO ACTIVE PRIMARY_INSTANCE NORMAL NO
Recovery Manager: Release 11.1.0.7.0 - Production on Thu Dec 1 10:16:23 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN> connect target /
connected to target database: MN122010 (DBID=2440111267)
RMAN> run{
ALLOCATE CHANNEL d1 DEVICE TYPE DISK FORMAT '/opt/oracle/oradata/BACKUPS_01/MN122010P/backup_%d_t%t_s%s_p%p';
BACKUP DATABASE PLUS ARCHIVELOG;
2> 3> 4>
using target database control file instead of recovery catalog
allocated channel: d1
channel d1: SID=140 device type=DISK
Starting backup at 01-DEC-11
current log archived
channel d1: starting archived log backup set
channel d1: specifying archived log(s) in backup set
input archived log thread=1 sequence=4117 RECID=7260 STAMP=766935608
input archived log thread=1 sequence=4118 RECID=7261 STAMP=766935619
input archived log thread=1 sequence=4119 RECID=7262 STAMP=766935630
input archived log thread=1 sequence=4120 RECID=7263 STAMP=766935635
....List of archives....
Starting backup at 01-DEC-11
channel d1: starting full datafile backup set
channel d1: specifying datafile(s) in backup set
input datafile file number=00010 name=/opt/oracle/oradata/MN122010P/TBCESPANDM_01.DBF
input datafile file number=00009 name=/opt/oracle/oradata/MN122010P/CESPAROUTING_01.DBF
input datafile file number=00007 name=/opt/oracle/oradata/MN122010P/TBCESPACALLEJERO_01.DBF
input datafile file number=00008 name=/opt/oracle/oradata/MN122010P/CESPAGEOCODER_01.DBF
input datafile file number=00001 name=/opt/oracle/oradata/MN122010P/system01.dbf
input datafile file number=00002 name=/opt/oracle/oradata/MN122010P/sysaux01.dbf
input datafile file number=00003 name=/opt/oracle/oradata/MN122010P/undotbs01.dbf
input datafile file number=00006 name=/opt/oracle/oradata/MN122010P/TBCESPAFONDO_01.DBF
input datafile file number=00005 name=/opt/oracle/oradata/MN122010P/TBCESPAPOIS_01.DBF
input datafile file number=00004 name=/opt/oracle/oradata/MN122010P/users01.dbf
channel d1: starting piece 1 at 01-DEC-11
channel d1: finished piece 1 at 01-DEC-11
piece handle=/opt/oracle/oradata/BACKUPS_01/MN122010P/backup_MN122010_t768739341_s768_p1 tag=TAG20111201T104221 comment=NONE
channel d1: backup set complete, elapsed time: 00:39:26
Finished backup at 01-DEC-11
Starting backup at 01-DEC-11
current log archived
channel d1: starting archived log backup set
channel d1: specifying archived log(s) in backup set
input archived log thread=1 sequence=4256 RECID=7399 STAMP=768741707
channel d1: starting piece 1 at 01-DEC-11
channel d1: finished piece 1 at 01-DEC-11
piece handle=/opt/oracle/oradata/BACKUPS_01/MN122010P/backup_MN122010_t768741708_s769_p1 tag=TAG20111201T112148 comment=NONE
channel d1: backup set complete, elapsed time: 00:00:01
Finished backup at 01-DEC-11
Starting Control File and SPFILE Autobackup at 01-DEC-11
piece handle=/opt/oracle/product/db111/dbs/c-2440111267-20111201-00 comment=NONE
Finished Control File and SPFILE Autobackup at 01-DEC-11
released channel: d1
I made a alter database create standby controlfile as at Primary and at Standby:
SQL> shutdown immediate;
ORA-01109: base de datos sin abrir
Base de datos desmontada.
Instancia ORACLE cerrada.
SQL> startup nomount;
Instancia ORACLE iniciada.
Total System Global Area 2937555928 bytes
Fixed Size 744408 bytes
Variable Size 1862270976 bytes
Database Buffers 1073741824 bytes
Redo Buffers 798720 bytes
copy the controlfile to standby controlfile locations
startup standby
ALTER DATABASE MOUNT STANDBY DATABASE;
And restoring with rman
Restoring
List of Archived Logs in backup set 616
Thrd Seq Low SCN Low Time Next SCN Next Time
1 4256 27049296 01-DEC-11 27052551 01-DEC-11
RMAN> run{
2> allocate channel c1 type disk format '/opt/oracle/oradata/BACKUPS_01/MN122010P/backup_%d_t%t_s%s_p%p';
3> restore database;
4> recover database until sequence 4256 thread 1;
5> sql 'alter database recover managed standby database disconnect from session';
6> release channel c1;
7> }
allocated channel: c1
channel c1: SID=164 device type=DISK
Starting restore at 01-DEC-11
Starting implicit crosscheck backup at 01-DEC-11
Crosschecked 115 objects
Finished implicit crosscheck backup at 01-DEC-11
Starting implicit crosscheck copy at 01-DEC-11
Crosschecked 24 objects
Finished implicit crosscheck copy at 01-DEC-11
searching for all files in the recovery area
cataloging files...
no files cataloged
channel c1: starting datafile backup set restore
channel c1: specifying datafile(s) to restore from backup set
channel c1: restoring datafile 00001 to /opt/oracle/oradata/MN122010P/system01.dbf
channel c1: restoring datafile 00002 to /opt/oracle/oradata/MN122010P/sysaux01.dbf
channel c1: restoring datafile 00003 to /opt/oracle/oradata/MN122010P/undotbs01.dbf
channel c1: restoring datafile 00004 to /opt/oracle/oradata/MN122010P/users01.dbf
channel c1: restoring datafile 00005 to /opt/oracle/oradata/MN122010P/TBCESPAPOIS_01.DBF
channel c1: restoring datafile 00006 to /opt/oracle/oradata/MN122010P/TBCESPAFONDO_01.DBF
channel c1: restoring datafile 00007 to /opt/oracle/oradata/MN122010P/TBCESPACALLEJERO_01.DBF
channel c1: restoring datafile 00008 to /opt/oracle/oradata/MN122010P/CESPAGEOCODER_01.DBF
channel c1: restoring datafile 00009 to /opt/oracle/oradata/MN122010P/CESPAROUTING_01.DBF
channel c1: restoring datafile 00010 to /opt/oracle/oradata/MN122010P/TBCESPANDM_01.DBF
channel c1: reading from backup piece /opt/oracle/oradata/BACKUPS_01/MN122010P/backup_MN122010_t768739341_s768_p1
After the restoring I found at standby that no archives have been applied:
SQL> SELECT SEQUENCE#, FIRST_TIME, NEXT_TIME,APPLIED
FROM V$ARCHIVED_LOG ORDER BY SEQUENCE#
/ 2 3
no rows selected
SQL> select * from v$Instance;
INSTANCE_NUMBER INSTANCE_NAME
HOST_NAME
VERSION STARTUP_T STATUS PAR THREAD# ARCHIVE LOG_SWITCH_WAIT
LOGINS SHU DATABASE_STATUS INSTANCE_ROLE ACTIVE_ST BLO
1 MN12201R
server02
11.1.0.7.0 01-DEC-11 MOUNTED NO 1 STARTED
ALLOWED NO ACTIVE PRIMARY_INSTANCE NORMAL NO
SQL> select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
7 rows selected.
On primary
MESSAGE
ARC3: Beginning to archive thread 1 sequence 4258 (27056314-27064244)
ARC3: Completed archiving thread 1 sequence 4258 (27056314-27064244)
ARC0: Beginning to archive thread 1 sequence 4259 (27064244-27064251)
ARC0: Completed archiving thread 1 sequence 4259 (27064244-27064251)
ARC2: Beginning to archive thread 1 sequence 4260 (27064251-27064328)
ARC2: Completed archiving thread 1 sequence 4260 (27064251-27064328)
ARC3: Beginning to archive thread 1 sequence 4261 (27064328-27064654)
ARC3: Completed archiving thread 1 sequence 4261 (27064328-27064654)
Edited by: user8898355 on 01-dic-2011 7:02I'm seeing those errors at primary
LNSb started with pid=20, OS id=30141
LGWR: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (16086)
LGWR: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
trace file:
*** 2011-12-02 09:52:17.164
*** SESSION ID:(183.1) 2011-12-02 09:52:17.164
*** CLIENT ID:() 2011-12-02 09:52:17.164
*** SERVICE NAME:(SYS$BACKGROUND) 2011-12-02 09:52:17.164
*** MODULE NAME:() 2011-12-02 09:52:17.164
*** ACTION NAME:() 2011-12-02 09:52:17.164
*** TRACE FILE RECREATED AFTER BEING REMOVED ***
*** 2011-12-02 09:52:17.164 6465 krsu.c
Initializing NetServer[LNSb] for dest=MN12201R.domain.es mode SYNC
LNSb is not running anymore.
New SYNC LNSb needs to be started
Waiting for subscriber count on LGWR-LNSb channel to go to zero
Subscriber count went to zero - time now is <12/02/2011 09:52:17>
Starting LNSb ...
Waiting for LNSb [pid 30141] to initialize itself
*** TRACE FILE RECREATED AFTER BEING REMOVED ***
*** 2011-12-02 09:52:17.164 6465 krsu.c
Initializing NetServer[LNSb] for dest=MN12201R.domain.es mode SYNC
LNSb is not running anymore.
New SYNC LNSb needs to be started
Waiting for subscriber count on LGWR-LNSb channel to go to zero
Subscriber count went to zero - time now is <12/02/2011 09:52:17>
Starting LNSb ...
Waiting for LNSb [pid 30141] to initialize itself
*** 2011-12-02 09:52:20.185
*** 2011-12-02 09:52:20.185 6828 krsu.c
Netserver LNSb [pid 30141] for mode SYNC has been initialized
Performing a channel reset to ignore previous responses
Successfully started LNSb [pid 30141] for dest MN12201R.domain.es mode SYNC ocis=0x2ba2cb1fece8
*** 2011-12-02 09:52:20.185 2880 krsu.c
Making upiahm request to LNSb [pid 30141]: Begin Time is <12/02/2011 09:52:17>. NET_TIMEOUT = <30> seconds
Waiting for LNSb to respond to upiahm
*** 2011-12-02 09:52:20.262 3044 krsu.c
upiahm connect done status is 0
Receiving message from LNSb
Receiving message from LNSb
LGWR: Failed
rfsp: 0x2ba2ca55c328
rfsmod: 2
rfsver: 3
rfsflag: 0x24882 -
DataGuard Standby 環境で db が open できない.
DataGuard Standby 環境で db が open できなくて困っています。
詳しい方いれば、原因と対処方法を教えていただきたいと思います。
create した spfile が正確に読み込まれていないことが原因のようなのですが。。
なぜ読み込めないのかが分からない状態です。
pfile を読み込んだ起動は可能ですが、spfile を読み込んだ起動の前提条件とは、
何なのでしょうか。単に整合性が取れていないだけなのか、それとも、、。
[grid@osaka1 shell]$ asmcmd
ASMCMD> ls
DATA/
FRA/
ASMCMD> cd data
ASMCMD> ls
ASM/
WEST/
ASMCMD> ls -l
Type Redund Striped Time Sys Name
Y ASM/
N WEST/
ASMCMD>
ASMCMD> cd west
ASMCMD> ls
CONTROLFILE/
DATAFILE/
ONLINELOG/
PARAMETERFILE/
TEMPFILE/
spfilewest.ora
ASMCMD> ls -l
Type Redund Striped Time Sys Name
N CONTROLFILE/
N DATAFILE/
N ONLINELOG/
N PARAMETERFILE/
N TEMPFILE/
N spfilewest.ora => +DATA/WEST/PARAMETERFILE/spfile.257.824236121
ASMCMD> pwd
+data/west
ASMCMD>
ASMCMD> cd para*
ASMCMD> ls -l
Type Redund Striped Time Sys Name
PARAMETERFILE MIRROR COARSE AUG 23 18:00:00 Y spfile.257.824236121
ASMCMD>
ASMCMD> pwd
+data/west/PARAMETERFILE
ASMCMD> quit
[grid@osaka1 shell]$
[oracle@osaka1 dbs]$ more initHPYMUSIC.ora
SPFILE='+DATA/west/spfilewest.ora'
[oracle@osaka1 dbs]$
よろしくお願い致します。
ps.
ORA-12154 は整合性の問題であるので、それを合わせれば消えると思っています。
そもそも RAC を前提としていたのですが、それを standalone に置き換えて検証始めた結果、
こうなってしまっています。
open できない原因が ORA-12154 だったりして。。
■ プライマリの場合
○ open するほうは、シンプルに以下だけで open することが確認できる。
が、db_name を変更した関係で
「ORA-12154: TNS: 指定された接続識別子を解決できませんでした」
が出続けている。
ORA-12154 は db が open できない原因とは無関係かもしれない。
srvctl stop database -d east -f
srvctl start database -d east -o open
srvctl config database -d east
srvctl status database -d east
○ 参考出力
set linesize 500 pages 0
col value for a90
col name for a50
select name, value
from v$parameter
where name in ('db_name','db_unique_name','log_archive_config', 'log_archive_dest_1','log_archive_dest_2',
'log_archive_dest_state_1','log_archive_dest_state_2', 'remote_login_passwordfile',
'log_archive_format','log_archive_max_processes','fal_server','db_file_name_convert',
'log_file_name_convert', 'standby_file_management');
SQL>
db_file_name_convert
log_file_name_convert
log_archive_dest_1
log_archive_dest_2 SERVICE=HPYMUSIC SYNC NOAFFIRM VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=west
log_archive_dest_state_1 enable
log_archive_dest_state_2 enable
fal_server
log_archive_config
log_archive_format %t_%s_%r.dbf
log_archive_max_processes 4
standby_file_management AUTO
remote_login_passwordfile EXCLUSIVE
db_name HPYMUSIC
db_unique_name HPYMUSIC ← ▼ db_name だけを変更したつもりが db_unique_name も変更されていた
14行が選択されました。
[oracle@tokyo1 shell]$ srvctl stop database -d east -f
[oracle@tokyo1 shell]$ /u01/app/11.2.0/grid/bin/crsctl status resource -t
NAME TARGET STATE SERVER STATE_DETAILS
Cluster Resources
ora.east.db
1 OFFLINE OFFLINE Instance Shutdown
[oracle@tokyo1 shell]$ srvctl start database -d east -o open
[oracle@tokyo1 shell]$ /u01/app/11.2.0/grid/bin/crsctl status resource -t
NAME TARGET STATE SERVER STATE_DETAILS
Local Resources
ora.DATA.dg
ONLINE ONLINE tokyo1
ora.FRA.dg
ONLINE ONLINE tokyo1
ora.LISTENER.lsnr
ONLINE ONLINE tokyo1
ora.asm
ONLINE ONLINE tokyo1 Started
Cluster Resources
ora.cssd
1 ONLINE ONLINE tokyo1
ora.diskmon
1 ONLINE ONLINE tokyo1
ora.east.db
1 ONLINE ONLINE tokyo1 Open ← ▼
[oracle@tokyo1 shell]$
[oracle@tokyo1 shell]$ srvctl config database -d east
一意のデータベース名: east
データベース名: east
Oracleホーム: /u01/app/oracle/product/11.2.0/dbhome_1
Oracleユーザー: grid
spfile: +DATA/east/spfileeast.ora
ドメイン:
開始オプション: open
停止オプション: immediate
データベース・ロール: PRIMARY
管理ポリシー: AUTOMATIC
ディスク・グループ: DATA,FRA
サービス:
[oracle@tokyo1 shell]$ srvctl status database -d east
データベースは実行中です。
Fri Aug 23 19:44:10 2013
Error 12154 received logging on to the standby
Errors in file /u01/app/oracle/diag/rdbms/hpymusic/HPYMUSIC/trace/HPYMUSIC_arc2_7579.trc:
ORA-12154: TNS: 指定された接続識別子を解決できませんでした
PING[ARC2]: Heartbeat failed to connect to standby 'HPYMUSIC'. Error is 12154.
[oracle@tokyo1 dbs]$ pwd
/u01/app/oracle/product/11.2.0/dbhome_1/dbs
[oracle@tokyo1 dbs]$
[oracle@tokyo1 dbs]$
[oracle@tokyo1 dbs]$ more 2013.08.23_east_pfile.txt
HPYMUSIC.__db_cache_size=301989888
HPYMUSIC.__java_pool_size=4194304
HPYMUSIC.__large_pool_size=8388608
HPYMUSIC.__pga_aggregate_target=339738624
HPYMUSIC.__sga_target=503316480
HPYMUSIC.__shared_io_pool_size=0
HPYMUSIC.__shared_pool_size=176160768
HPYMUSIC.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/east/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='+DATA/east/controlfile/current.270.823277705','+FRA/east/controlfile/current.
260.823277707'
*.db_block_checking='TRUE'
*.db_block_checksum='TRUE'
*.db_block_size=8192
*.db_create_file_dest='+DATA'
*.db_domain=''
*.db_name='HPYMUSIC'
*.db_recovery_file_dest='+FRA'
*.db_recovery_file_dest_size=3038773248
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=HPYMUSICXDB)'
*.log_archive_format='%t_%s_%r.dbf'
*.memory_target=842006528
*.nls_language='JAPANESE'
*.nls_territory='JAPAN'
*.open_cursors=300
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.standby_file_management='AUTO'
*.undo_tablespace='UNDOTBS1'
Fri Aug 23 19:49:38 2013
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
ARCH: Warning; less destinations available than specified
by LOG_ARCHIVE_MIN_SUCCEED_DEST init.ora parameter
Autotune of undo retention is turned on.
IMODE=BR
ILAT =27
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Using parameter settings in server-side spfile /u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfileHPYMUSIC.ora
System parameters with non-default values:
processes = 150
nls_language = "JAPANESE"
nls_territory = "JAPAN"
memory_target = 804M
control_files = "+DATA/east/controlfile/current.270.823277705"
control_files = "+FRA/east/controlfile/current.260.823277707"
db_block_checksum = "TRUE"
db_block_size = 8192
compatible = "11.2.0.0.0"
log_archive_dest_2 = "SERVICE=HPYMUSIC SYNC NOAFFIRM VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=west"
log_archive_format = "%t_%s_%r.dbf"
db_create_file_dest = "+DATA"
db_recovery_file_dest = "+FRA"
db_recovery_file_dest_size= 2898M
standby_file_management = "AUTO"
undo_tablespace = "UNDOTBS1"
db_block_checking = "TRUE"
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=HPYMUSICXDB)"
audit_file_dest = "/u01/app/oracle/admin/east/adump"
audit_trail = "DB"
db_name = "HPYMUSIC"
open_cursors = 300
diagnostic_dest = "/u01/app/oracle"
Fri Aug 23 19:49:39 2013
PMON started with pid=2, OS id=8442
Fri Aug 23 19:49:39 2013
VKTM started with pid=3, OS id=8444 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Fri Aug 23 19:49:39 2013
GEN0 started with pid=4, OS id=8448
Fri Aug 23 19:49:39 2013
DIAG started with pid=5, OS id=8450
Fri Aug 23 19:49:39 2013
DBRM started with pid=6, OS id=8452
Fri Aug 23 19:49:39 2013
PSP0 started with pid=7, OS id=8454
Fri Aug 23 19:49:39 2013
DIA0 started with pid=8, OS id=8456
Fri Aug 23 19:49:39 2013
MMAN started with pid=9, OS id=8458
Fri Aug 23 19:49:39 2013
DBW0 started with pid=10, OS id=8460
Fri Aug 23 19:49:39 2013
LGWR started with pid=11, OS id=8462
Fri Aug 23 19:49:39 2013
CKPT started with pid=12, OS id=8464
Fri Aug 23 19:49:39 2013
SMON started with pid=13, OS id=8466
Fri Aug 23 19:49:39 2013
RECO started with pid=14, OS id=8468
Fri Aug 23 19:49:39 2013
RBAL started with pid=15, OS id=8470
Fri Aug 23 19:49:39 2013
ASMB started with pid=16, OS id=8472
Fri Aug 23 19:49:39 2013
MMON started with pid=17, OS id=8474
Fri Aug 23 19:49:39 2013
MMNL started with pid=18, OS id=8478
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
NOTE: initiating MARK startup
starting up 1 shared server(s) ...
Starting background process MARK
Fri Aug 23 19:49:39 2013
MARK started with pid=20, OS id=8482
NOTE: MARK has subscribed
ORACLE_BASE not set in environment. It is recommended
that ORACLE_BASE be set in the environment
Reusing ORACLE_BASE from an earlier startup = /u01/app/oracle
Fri Aug 23 19:49:39 2013
ALTER DATABASE MOUNT
NOTE: Loaded library: System
SUCCESS: diskgroup DATA was mounted
ERROR: failed to establish dependency between database HPYMUSIC and diskgroup resource ora.DATA.dg
SUCCESS: diskgroup FRA was mounted
ERROR: failed to establish dependency between database HPYMUSIC and diskgroup resource ora.FRA.dg
Fri Aug 23 19:49:46 2013
NSS2 started with pid=24, OS id=8572
Successful mount of redo thread 1, with mount id 2951868947
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: ALTER DATABASE MOUNT
ALTER DATABASE OPEN
LGWR: STARTING ARCH PROCESSES
Fri Aug 23 19:49:47 2013
ARC0 started with pid=26, OS id=8574
ARC0: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC0: STARTING ARCH PROCESSES
Fri Aug 23 19:49:48 2013
ARC1 started with pid=27, OS id=8576
Fri Aug 23 19:49:48 2013
ARC2 started with pid=28, OS id=8578
ARC1: Archival started
ARC2: Archival started
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
ARC2: Becoming the heartbeat ARCH
Fri Aug 23 19:49:48 2013
ARC3 started with pid=29, OS id=8580
LGWR: Setting 'active' archival for destination LOG_ARCHIVE_DEST_2
ARC3: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
Error 12154 received logging on to the standby
Fri Aug 23 19:49:51 2013
Errors in file /u01/app/oracle/diag/rdbms/hpymusic/HPYMUSIC/trace/HPYMUSIC_lgwr_8462.trc:
ORA-12154: TNS: ?????????????????????
Error 12154 for archive log file 2 to 'HPYMUSIC'
LGWR: Failed to archive log 2 thread 1 sequence 8 (12154)
Thread 1 advanced to log sequence 8 (thread open)
Thread 1 opened at log sequence 8
Current log# 2 seq# 8 mem# 0: +DATA/hpymusic/onlinelog/group_2.272.824213887
Current log# 2 seq# 8 mem# 1: +FRA/hpymusic/onlinelog/group_2.262.824213889
Successful open of redo thread 1
Fri Aug 23 19:49:51 2013
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Fri Aug 23 19:49:51 2013
SMON: enabling cache recovery
Error 12154 received logging on to the standby
Errors in file /u01/app/oracle/diag/rdbms/hpymusic/HPYMUSIC/trace/HPYMUSIC_arc2_8578.trc:
ORA-12154: TNS: 指定された接続識別子を解決できませんでした
PING[ARC2]: Heartbeat failed to connect to standby 'HPYMUSIC'. Error is 12154.
Archived Log entry 7 added for thread 1 sequence 7 ID 0xaff1210d dest 1:
Error 12154 received logging on to the standby
Errors in file /u01/app/oracle/diag/rdbms/hpymusic/HPYMUSIC/trace/HPYMUSIC_arc3_8580.trc:
ORA-12154: TNS: 指定された接続識別子を解決できませんでした
FAL[server, ARC3]: Error 12154 creating remote archivelog file 'HPYMUSIC'
FAL[server, ARC3]: FAL archive failed, see trace file.
Errors in file /u01/app/oracle/diag/rdbms/hpymusic/HPYMUSIC/trace/HPYMUSIC_arc3_8580.trc:
ORA-16055: FALリクエストが拒否されました。
ARCH: FAL archive failed. Archiver continuing
ORACLE Instance HPYMUSIC - Archival Error. Archiver continuing.
Successfully onlined Undo Tablespace 2.
Verifying file header compatibility for 11g tablespace encryption..
Verifying 11g file header compatibility for tablespace encryption completed
SMON: enabling tx recovery
Database Characterset is AL32UTF8
No Resource Manager plan active
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
Fri Aug 23 19:49:55 2013
QMNC started with pid=32, OS id=8590
Completed: ALTER DATABASE OPEN
Fri Aug 23 19:49:59 2013
Starting background process CJQ0
Fri Aug 23 19:49:59 2013
CJQ0 started with pid=33, OS id=8609
Fri Aug 23 19:49:59 2013
db_recovery_file_dest_size of 2898 MB is 6.38% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
[root@tokyo1 app]#
[root@tokyo1 app]# more /u01/app/oracle/diag/rdbms/hpymusic/HPYMUSIC/trace/HPYMUSIC_arc2_8578.trc
Trace file /u01/app/oracle/diag/rdbms/hpymusic/HPYMUSIC/trace/HPYMUSIC_arc2_8578.trc
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, Automatic Storage Management, OLAP, Data Mining
and Real Application Testing options
ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1
System name: Linux
Node name: tokyo1.oracle11g.jp
Release: 2.6.18-348.12.1.el5
Version: #1 SMP Wed Jul 10 05:28:41 EDT 2013
Machine: x86_64
Instance name: HPYMUSIC
Redo thread mounted by this instance: 1
Oracle process number: 28
Unix process pid: 8578, image: [email protected] (ARC2)
*** 2013-08-23 19:49:51.707
*** SESSION ID:(15.1) 2013-08-23 19:49:51.707
*** CLIENT ID:() 2013-08-23 19:49:51.707
*** SERVICE NAME:() 2013-08-23 19:49:51.707
*** MODULE NAME:() 2013-08-23 19:49:51.707
*** ACTION NAME:() 2013-08-23 19:49:51.707
Redo shipping client performing standby login
OCIServerAttach failed -1
.. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
OCIServerAttach failed -1
.. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
OCIServerAttach failed -1
.. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
*** 2013-08-23 19:49:51.972 4132 krsh.c
Error 12154 received logging on to the standby
*** 2013-08-23 19:49:51.972 869 krsu.c
Error 12154 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'HPYMUSIC'
Error 12154 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'HPYMUSIC'
ORA-12154: TNS: 指定された接続識別子を解決できませんでした
*** 2013-08-23 19:49:51.973 4132 krsh.c
PING[ARC2]: Heartbeat failed to connect to standby 'HPYMUSIC'. Error is 12154.
*** 2013-08-23 19:49:51.973 2747 krsi.c
krsi_dst_fail: dest:2 err:12154 force:0 blast:1
*** 2013-08-23 19:50:49.816
Redo shipping client performing standby login
OCIServerAttach failed -1
.. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
OCIServerAttach failed -1
.. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
OCIServerAttach failed -1
.. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
*** 2013-08-23 19:50:50.070 4132 krsh.c
Error 12154 received logging on to the standby
*** 2013-08-23 19:50:50.070 869 krsu.c
Error 12154 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'HPYMUSIC'
Error 12154 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'HPYMUSIC'
ORA-12154: TNS: 指定された接続識別子を解決できませんでした
*** 2013-08-23 19:50:50.070 4132 krsh.c
PING[ARC2]: Heartbeat failed to connect to standby 'HPYMUSIC'. Error is 12154.
*** 2013-08-23 19:50:50.070 2747 krsi.c
krsi_dst_fail: dest:2 err:12154 force:0 blast:1
*** 2013-08-23 19:51:51.147
Redo shipping client performing standby login
OCIServerAttach failed -1
.. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
OCIServerAttach failed -1
.. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
OCIServerAttach failed -1
.. Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS: 指定された接続識別子を解決できませんでした
*** 2013-08-23 19:51:51.403 4132 krsh.c
Error 12154 received logging on to the standby
*** 2013-08-23 19:51:51.403 869 krsu.c
Error 12154 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'HPYMUSIC'
Error 12154 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'HPYMUSIC'
ORA-12154: TNS: 指定された接続識別子を解決できませんでした
*** 2013-08-23 19:51:51.403 4132 krsh.c
PING[ARC2]: Heartbeat failed to connect to standby 'HPYMUSIC'. Error is 12154.
*** 2013-08-23 19:51:51.403 2747 krsi.c
krsi_dst_fail: dest:2 err:12154 force:0 blast:1
[root@tokyo1 app]#
[grid@tokyo1 shell]$ ./grid_info_east-x.sh
+ export ORACLE_SID=+ASM
+ ORACLE_SID=+ASM
+ LOGDIR=/home/grid/log
+ PRIMARYDB=east_DGMGRL
+ STANDBYDB=
+ PASSWORD=dataguard
+ mkdir -p /home/grid/log
++ date +%y%m%d,%H%M%S
+ echo 'asm info,130823,195709'
+ sqlplus / as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on 金 8月 23 19:57:09 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Automatic Storage Management option
に接続されました。
SQL> SQL>
SYSDATE
13-08-23
SQL> SQL> SQL>
NAME TYPE VALUE
asm_diskgroups string FRA
asm_diskstring string /dev/sd*1
asm_power_limit integer 1
asm_preferred_read_failure_groups string
audit_file_dest string /u01/app/11.2.0/grid/rdbms/audit
audit_sys_operations boolean FALSE
audit_syslog_level string
background_core_dump string partial
background_dump_dest string /u01/app/grid/diag/asm/+asm/+ASM/trace
cluster_database boolean FALSE
cluster_database_instances integer 1
cluster_interconnects string
core_dump_dest string /u01/app/grid/diag/asm/+asm/+ASM/cdump
db_cache_size big integer 0
db_ultra_safe string OFF
db_unique_name string +ASM
diagnostic_dest string /u01/app/grid
event string
file_mapping boolean FALSE
filesystemio_options string none
ifile file
instance_name string +ASM
instance_number integer 1
instance_type string asm
large_pool_size big integer 12M
ldap_directory_sysauth string no
listener_networks string
local_listener string
lock_name_space string
lock_sga boolean FALSE
max_dump_file_size string unlimited
memory_max_target big integer 272M
memory_target big integer 272M
nls_calendar string
nls_comp string BINARY
nls_currency string
nls_date_format string
nls_date_language string
nls_dual_currency string
nls_iso_currency string
nls_language string AMERICAN
nls_length_semantics string BYTE
nls_nchar_conv_excp string FALSE
nls_numeric_characters string
nls_sort string
nls_territory string AMERICA
nls_time_format string
nls_time_tz_format string
nls_timestamp_format string
nls_timestamp_tz_format string
os_authent_prefix string ops$
os_roles boolean FALSE
pga_aggregate_target big integer 0
processes integer 100
remote_listener string
remote_login_passwordfile string EXCLUSIVE
remote_os_authent boolean FALSE
remote_os_roles boolean FALSE
service_names string +ASM
sessions integer 172
sga_max_size big integer 272M
sga_target big integer 0
shadow_core_dump string partial
shared_pool_reserved_size big integer 6081740
shared_pool_size big integer 0
sort_area_size integer 65536
spfile string +DATA/asm/asmparameterfile/registry.253.823204697
sql_trace boolean FALSE
statistics_level string TYPICAL
timed_os_statistics integer 0
timed_statistics boolean TRUE
trace_enabled boolean TRUE
user_dump_dest string /u01/app/grid/diag/asm/+asm/+ASM/trace
workarea_size_policy string AUTO
++ date +%y%m%d,%H%M%S
+ echo 'asmcmd info,130823,195709'
+ asmcmd ls -l
State Type Rebal Name
MOUNTED NORMAL N DATA/
MOUNTED NORMAL N FRA/
+ asmcmd ls -l 'data/asm/*'
Type Redund Striped Time Sys Name
ASMPARAMETERFILE MIRROR COARSE AUG 11 19:00:00 Y REGISTRY.253.823204697
+ asmcmd ls -l 'data/east/*'
Type Redund Striped Time Sys Name
+data/east/CONTROLFILE/:
CONTROLFILE HIGH FINE AUG 12 15:00:00 Y Current.260.823276231
CONTROLFILE HIGH FINE AUG 23 19:00:00 Y Current.270.823277705
+data/east/DATAFILE/:
DATAFILE MIRROR COARSE AUG 12 15:00:00 Y SYSAUX.257.823276133
DATAFILE MIRROR COARSE AUG 23 19:00:00 Y SYSAUX.267.823277615
DATAFILE MIRROR COARSE AUG 12 15:00:00 Y SYSTEM.256.823276131
DATAFILE MIRROR COARSE AUG 23 19:00:00 Y SYSTEM.266.823277615
DATAFILE MIRROR COARSE AUG 12 15:00:00 Y UNDOTBS1.258.823276133
DATAFILE MIRROR COARSE AUG 23 19:00:00 Y UNDOTBS1.268.823277615
DATAFILE MIRROR COARSE AUG 12 15:00:00 Y USERS.259.823276133
DATAFILE MIRROR COARSE AUG 23 19:00:00 Y USERS.269.823277615
+data/east/ONLINELOG/:
ONLINELOG MIRROR COARSE AUG 12 15:00:00 Y group_1.261.823276235
ONLINELOG MIRROR COARSE AUG 12 15:00:00 Y group_2.262.823276241
ONLINELOG MIRROR COARSE AUG 12 15:00:00 Y group_3.263.823276247
+data/east/PARAMETERFILE/:
PARAMETERFILE MIRROR COARSE AUG 23 12:00:00 Y spfile.265.823277967
+data/east/TEMPFILE/:
TEMPFILE MIRROR COARSE AUG 12 15:00:00 Y TEMP.264.823276263
TEMPFILE MIRROR COARSE AUG 23 19:00:00 Y TEMP.274.823277733
N spfileeast.ora => +DATA/EAST/PARAMETERFILE/spfile.265.823277967
+ asmcmd ls -l 'fra/east/*'
Type Redund Striped Time Sys Name
+fra/east/ARCHIVELOG/:
Y 2013_08_12/
Y 2013_08_15/
Y 2013_08_19/
Y 2013_08_22/
Y 2013_08_23/
+fra/east/CONTROLFILE/:
CONTROLFILE HIGH FINE AUG 12 15:00:00 Y Current.256.823276231
CONTROLFILE HIGH FINE AUG 23 19:00:00 Y Current.260.823277707
+fra/east/ONLINELOG/:
ONLINELOG MIRROR COARSE AUG 12 15:00:00 Y group_1.257.823276237
ONLINELOG MIRROR COARSE AUG 23 19:00:00 Y group_10.272.823535727
ONLINELOG MIRROR COARSE AUG 23 19:00:00 Y group_11.273.823535737
ONLINELOG MIRROR COARSE AUG 23 19:00:00 Y group_12.274.823535745
ONLINELOG MIRROR COARSE AUG 23 19:00:00 Y group_13.275.823535757
ONLINELOG MIRROR COARSE AUG 23 19:00:00 Y group_14.276.823535763
ONLINELOG MIRROR COARSE AUG 23 19:00:00 Y group_15.277.823535771
ONLINELOG MIRROR COARSE AUG 12 15:00:00 Y group_2.258.823276245
ONLINELOG MIRROR COARSE AUG 12 15:00:00 Y group_3.259.823276251
ONLINELOG MIRROR COARSE AUG 23 19:00:00 Y group_7.269.823535685
ONLINELOG MIRROR COARSE AUG 23 19:00:00 Y group_8.270.823535695
ONLINELOG MIRROR COARSE AUG 23 19:00:00 Y group_9.271.823535703
+fra/east/STANDBYLOG/:
N standby_group_07.log => +FRA/EAST/ONLINELOG/group_7.269.823535685
N standby_group_08.log => +FRA/EAST/ONLINELOG/group_8.270.823535695
N standby_group_09.log => +FRA/EAST/ONLINELOG/group_9.271.823535703
N standby_group_10.log => +FRA/EAST/ONLINELOG/group_10.272.823535727
N standby_group_11.log => +FRA/EAST/ONLINELOG/group_11.273.823535737
N standby_group_12.log => +FRA/EAST/ONLINELOG/group_12.274.823535745
N standby_group_13.log => +FRA/EAST/ONLINELOG/group_13.275.823535757
N standby_group_14.log => +FRA/EAST/ONLINELOG/group_14.276.823535763
N standby_group_15.log => +FRA/EAST/ONLINELOG/group_15.277.823535771
+ asmcmd find +data 'group*'
+data/EAST/ONLINELOG/group_1.261.823276235
+data/EAST/ONLINELOG/group_2.262.823276241
+data/EAST/ONLINELOG/group_3.263.823276247
+data/HPYMUSIC/ONLINELOG/group_1.271.824213881
+data/HPYMUSIC/ONLINELOG/group_2.272.824213887
+data/HPYMUSIC/ONLINELOG/group_3.273.824213895
+ asmcmd find +data 'spf*'
+data/EAST/PARAMETERFILE/spfile.265.823277967
+data/EAST/spfileeast.ora
+ asmcmd ls -l data/east/CONTROLFILE
Type Redund Striped Time Sys Name
CONTROLFILE HIGH FINE AUG 12 15:00:00 Y Current.260.823276231
CONTROLFILE HIGH FINE AUG 23 19:00:00 Y Current.270.823277705
+ asmcmd find +fra 'group*'
+fra/EAST/ONLINELOG/group_1.257.823276237
+fra/EAST/ONLINELOG/group_10.272.823535727
+fra/EAST/ONLINELOG/group_11.273.823535737
+fra/EAST/ONLINELOG/group_12.274.823535745
+fra/EAST/ONLINELOG/group_13.275.823535757
+fra/EAST/ONLINELOG/group_14.276.823535763
+fra/EAST/ONLINELOG/group_15.277.823535771
+fra/EAST/ONLINELOG/group_2.258.823276245
+fra/EAST/ONLINELOG/group_3.259.823276251
+fra/EAST/ONLINELOG/group_7.269.823535685
+fra/EAST/ONLINELOG/group_8.270.823535695
+fra/EAST/ONLINELOG/group_9.271.823535703
+fra/HPYMUSIC/ONLINELOG/group_1.261.824213883
+fra/HPYMUSIC/ONLINELOG/group_2.262.824213889
+fra/HPYMUSIC/ONLINELOG/group_3.263.824213897
+ asmcmd find +fra 'spf*'
+ asmcmd ls -l fra/east/CONTROLFILE
Type Redund Striped Time Sys Name
CONTROLFILE HIGH FINE AUG 12 15:00:00 Y Current.256.823276231
CONTROLFILE HIGH FINE AUG 23 19:00:00 Y Current.260.823277707
++ date +%y%m%d,%H%M%S
+ echo END,130823,195712
[grid@tokyo1 shell]$
■ 以下、スタンバイ側 ■ ■ ■ ■ ■ ■ ■
export ORACLE_SID=HPYMUSIC
sqlplus / as sysdba
startup nomount pfile='/u01/app/oracle/product/11.2.0/dbhome_1/dbs/pfile_for_standby_HPYMUSIC.txt'
create spfile='+data/west/spfilewest.ora' from pfile='/u01/app/oracle/product/11.2.0/dbhome_1/dbs/pfile_for_standby_HPYMUSIC.txt';
srvctl stop database -d west -f
srvctl start database -d west -o open
srvctl start database -d west -o mount
srvctl start database -d west
startup mount pfile='/u01/app/oracle/product/11.2.0/dbhome_1/dbs/pfile_for_standby_HPYMUSIC.txt'
srvctl start database -d west -o open
srvctl config database -d west
srvctl status database -d west
alter database recover managed standby database disconnect from session;
select name, database_role, open_mode from gv$database;
srvctl modify database -d west -s open
○ spfile を作成する
export ORACLE_SID=HPYMUSIC
sqlplus / as sysdba
startup nomount pfile='/u01/app/oracle/product/11.2.0/dbhome_1/dbs/pfile_for_standby_HPYMUSIC.txt'
create spfile='+data/west/spfilewest.ora' from pfile='/u01/app/oracle/product/11.2.0/dbhome_1/dbs/pfile_for_standby_HPYMUSIC.txt';
○ 落とす
srvctl stop database -d west -f
○ open したいが起動しない（ Mounted (Closed) 状態で起動することもある）。
srvctl start database -d west -o open
PRCR-1079 : リソースora.west.dbの起動に失敗しました
CRS-2674: Start of 'ora.west.db' on 'osaka1' failed
○ open したいが起動しない（ Mounted (Closed) 状態で起動することもある）。
srvctl start database -d west -o mount
PRCR-1079 : リソースora.west.dbの起動に失敗しました
CRS-2674: Start of 'ora.west.db' on 'osaka1' failed
○ open したいが起動しない（ Mounted (Closed) 状態で起動することもある）。
srvctl start database -d west
PRCR-1079 : リソースora.west.dbの起動に失敗しました
CRS-2674: Start of 'ora.west.db' on 'osaka1' failed
○ 起動するがエラーあり（ alert_HPYMUSIC.log ）
startup mount pfile='/u01/app/oracle/product/11.2.0/dbhome_1/dbs/pfile_for_standby_HPYMUSIC.txt'
[oracle@osaka1 dbs]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on 金 8月 23 19:05:35 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
アイドル・インスタンスに接続しました。
SQL> startup mount pfile='/u01/app/oracle/product/11.2.0/dbhome_1/dbs/pfile_for_standby_HPYMUSIC.txt'
ORACLEインスタンスが起動しました。
Total System Global Area 839282688 bytes
Fixed Size 2217992 bytes
Variable Size 515901432 bytes
Database Buffers 314572800 bytes
Redo Buffers 6590464 bytes
データベースがマウントされました。
Error 12154 received logging on to the standby
FAL[client, ARC3]: Error 12154 connecting to HPYMUSIC for fetching gap sequence
Errors in file /u01/app/oracle/diag/rdbms/west/HPYMUSIC/trace/HPYMUSIC_arc3_25690.trc:
ORA-12154: TNS: 指定された接続識別子を解決できませんでした
Errors in file /u01/app/oracle/diag/rdbms/west/HPYMUSIC/trace/HPYMUSIC_arc3_25690.trc:
ORA-12154: TNS: 指定された接続識別子を解決できませんでした
○ open にならず Mounted (Closed) としかなってくれない。
srvctl start database -d west -o open
[oracle@osaka1 dbs]$ srvctl start database -d west -o open
[oracle@osaka1 dbs]$ /u01/app/11.2.0/grid/bin/crsctl status resource -t
NAME TARGET STATE SERVER STATE_DETAILS
Local Resources
ora.DATA.dg
ONLINE ONLINE osaka1
ora.FRA.dg
ONLINE ONLINE osaka1
ora.LISTENER.lsnr
ONLINE ONLINE osaka1
ora.asm
ONLINE ONLINE osaka1 Started
Cluster Resources
ora.cssd
1 ONLINE ONLINE osaka1
ora.diskmon
1 ONLINE ONLINE osaka1
ora.west.db
1 ONLINE INTERMEDIATE osaka1 Mounted (Closed)
○
srvctl config database -d west
srvctl status database -d west
[oracle@osaka1 dbs]$ srvctl config database -d west
一意のデータベース名: west
データベース名: HPYMUSIC
Oracleホーム: /u01/app/oracle/product/11.2.0/dbhome_1
Oracleユーザー: grid
spfile: +data/west/spfilewest.ora
ドメイン:
開始オプション: open
停止オプション: immediate
データベース・ロール: physical_standby
管理ポリシー: AUTOMATIC
ディスク・グループ: DATA,FRA
サービス:
[oracle@osaka1 dbs]$ srvctl status database -d west
データベースは実行中です。
○ mrp プロセスが起動するが、Read Only ではない。
alter database recover managed standby database disconnect from session;
select name, database_role, open_mode from gv$database;
[oracle@osaka1 dbs]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on 金 8月 23 19:33:08 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, Automatic Storage Management, OLAP, Data Mining
and Real Application Testing options
に接続されました。
SQL>
SQL> alter database recover managed standby database disconnect from session;
データベースが変更されました。
SQL> select name, database_role, open_mode from gv$database;
NAME DATABASE_ROLE
OPEN_MODE
HPYMUSIC PHYSICAL STANDBY
MOUNTED
[root@osaka1 app]# ps -ef |egrep -i mrp
oracle 26269 1 0 19:33 ? 00:00:00 ora_mrp0_HPYMUSIC
○ modify しても open にならない。
srvctl modify database -d west -s open
[oracle@osaka1 dbs]$ srvctl modify database -d west -s open
[oracle@osaka1 dbs]$ /u01/app/11.2.0/grid/bin/crsctl status resource -t
NAME TARGET STATE SERVER STATE_DETAILS
Local Resources
ora.DATA.dg
ONLINE ONLINE osaka1
ora.FRA.dg
ONLINE ONLINE osaka1
ora.LISTENER.lsnr
ONLINE ONLINE osaka1
ora.asm
ONLINE ONLINE osaka1 Started
Cluster Resources
ora.cssd
1 ONLINE ONLINE osaka1
ora.diskmon
1 ONLINE ONLINE osaka1
ora.west.db
1 ONLINE INTERMEDIATE osaka1 Mounted (Closed)standby 側に、アーカイブログファイルを少し適用すれば open できそうに感じます。
これを解決するためには、以下のエラーを解決するのがよいと思います。
・ORA-12154: TNS: 指定された接続識別子を解決できませんでした
両ノードの tnsnames.ora を確認させて貰えますか？
この推測が間違えていたら再検討しましょう。 -
5 Dataguard questions on implementation and maintainence
I have created Oracle10g Dataguard Physical standby. Everything seems to working properly. I switch a log@primary and i see it applied at standby. In OEM the Primary instance is shown as "Primary" and Dataguard Normal.
Questions
=======
1.I used cold backup to create physical standby where i copied just the datafiles. I DID NOT copy the online logfiles from primary DB . Is this ok?
Reason i am asking is, I am seeing this in alertlog (Please see in Bold below). Could this message in alert be ignored?
Fri Mar 14 16:11:55 2008
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[5]: Assigned to RFS process 9652
RFS[5]: Identified database type as 'physical standby'
Fri Mar 14 16:11:57 2008
Media Recovery Waiting for thread 1 sequence 140 (in transit)
Fri Mar 14 16:12:09 2008
RFS[4]: Archived Log: '/b03/archive/PRI/arch1_140_649240729.arc'
Primary database is in MAXIMUM PERFORMANCE mode
RFS[4]: No standby redo logfiles created
Fri Mar 14 16:12:12 2008
Media Recovery Log /b03/archive/PRI/arch1_140_649240729.arc
Media Recovery Waiting for thread 1 sequence 141 (in transit)
Fri Mar 14 16:12:58 2008
2. Physical standby was created in default mode " MAX PERFORMANCE" but i followed the manual and i realize i created standby redo logs at primary DB.
Is it true we do not need standby redo logs for MAX PERFORMANCE mode?
3. What is the quickest way to create a physical standby taking into consideration the downtime of the primary database.
4. Can we setup Dataguard for a live running production database (assuming prod is all set with prepare steps as laid out in manual) without downtime.
5. I hear dataguard management involves lot of shell scripting for log shipping, failover, switchover etc. Looking at 10g manual all these appear to be handled automatically if configured. Is it true that all the Dataguard functionality is auto and does not need shell scripting?
These are the things came up to mind. Please list any others you can think of for a Dataguard implementation. Any help greatly appreciated.
Thanks and have a great time.
S~My question is , I havent created either online logfiles or standby log files on the secondary database, then how is RFS process applying the logs to the standby database?
If you do not create standby log files on the secondary database, then RFS process will apply logs from primary DB's archieved redo logs, refer 5.1 Introduction to Redo Transport Services.(http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/log_transport.htm)
Also i see entries in v$log@standby, since i haven't created log files@standby where is this info getting from?
It will be through the entry in Stndby DB parameter file "LOG_FILE_NAME_CONVERT=
'/arch1/chicago/','/arch1/boston/','/arch2/chicago/','/arch2/boston/'
Thanks -
Configuring Active Dataguard- Error comes while taking rman backup
Hi All,
I'm following this( http://wiki.oracle.com/page/11gR2+Data+Guard+Setup+project+Part5 ) article to configure a active dataguard. And i have successfully completed lot of steps up to now.
But im getting an error when i'm trying to complete the step 10 under chapter 5 (creating stand by)
step 10
10- OK, here we go, log into RMAN and run the following script. This script will create the standby database
At the command prompt type in rman
when rman launches connect to the target and auxiliary databases
connect target sys/michael@MS112DGP
connect auxiliary sys/michael@MS112DGS
here is my one... my primary db is called as dgp and my stand by is dgs
this is the error im getting... :(
[oracle@dgs ~]$ rman
Recovery Manager: Release 11.2.0.1.0 - Production on Sat Apr 23 09:54:40 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN> connect target sys/oracle@dgp
connected to target database: DGP (DBID=1555810211)
RMAN> connect auxiliary sys/oracle@dgs
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-04006: error from auxiliary database: ORA-12528: TNS:listener: all appropriate instances are blocking new connections
RMAN>
can anybody please help me to sort this out. once i solved this i can complete my first dataguard :)
Thanks in advance
MaxHello Sb,
[oracle@dgs admin]$ lsnrctl stop
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 23-APR-2011 21:28:02
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
The command completed successfully
[oracle@dgs admin]$ mv listener.ora listener.ora_bkp
[oracle@dgs admin]$ ll
total 16
-rw-r--r-- 1 oracle oinstall 471 Apr 17 09:25 listener.ora_bkp
drwxr-xr-x 2 oracle oinstall 4096 Apr 15 14:18 samples
-rw-r--r-- 1 oracle oinstall 187 May 9 2007 shrept.lst
-rw-r--r-- 1 oracle oinstall 506 Apr 17 09:07 tnsnames.ora
[oracle@dgs admin]$ lsnrctl start
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 23-APR-2011 21:28:26
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Starting /u01/app/oracle/product/11.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Log messages written to /u01/app/oracle/diag/tnslsnr/dgs/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=dgs.oracle.com)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 23-APR-2011 21:28:26
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File /u01/app/oracle/diag/tnslsnr/dgs/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=dgs.oracle.com)(PORT=1521)))
The listener supports no services
The command completed successfully
[oracle@dgs admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 23-APR-2011 21:28:37
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 23-APR-2011 21:28:26
Uptime 0 days 0 hr. 0 min. 10 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File /u01/app/oracle/diag/tnslsnr/dgs/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=dgs.oracle.com)(PORT=1521)))
The listener supports no services
The command completed successfully
[oracle@dgs admin]$
Thanks,
Max -
Hi all,
I have prepared a logical dataguard on two local systems. My oracle version is 9i and linux version is Entreprise Linux 3.0.
Today when i tried to execute spcreate.sql on the primary database it had thrown some errors in my secondary database.
Kindly look at the following output from my secondary database:-
SQL> select applied_scn,newest_scn from dba_logstdby_progress;
APPLIED_SCN NEWEST_SCN
270084 272644
SQL> SELECT XIDUSN, XIDSLT, XIDSQN FROM DBA_LOGSTDBY_EVENTS
2 WHERE EVENT_TIME = (SELECT MAX(EVENT_TIME) FROM DBA_LOGSTDBY_EVENTS);
XIDUSN XIDSLT XIDSQN
6 1 114
SQL> EXECUTE DBMS_LOGSTDBY.SKIP_TRANSACTION(6,1,114);
PL/SQL procedure successfully completed.
SQL> ALTER DATABASE START LOGICAL STANDBY APPLY;
Database altered.
SQL> select applied_scn,newest_scn from dba_logstdby_progress;
APPLIED_SCN NEWEST_SCN
270087 272644
SQL> SELECT * FROM DBA_LOGSTDBY_EVENTS;
EVENT_TIM CURRENT_SCN COMMIT_SCN XIDUSN XIDSLT XIDSQN
EVENT
STATUS_CODE
STATUS
grant select on STATS$V_$SQLXS to PERFSTAT
942
ORA-00942: table or view does not exist
from the above errors i have found out that a particular transaction is unable to replicate in my standby database and i skipped the transaction. But still after skipping the transaction applied_scn in the dba_logstdby_progress is moving only by 3 each time I skip a transaction . So it won'' t be possible for me to skip each and every transaction.
Kindly let me another way of skipping the rest of transactions which are causing halt in the replication.
Also I am unable to find out how the script executed from the sys user can be replicated on logical database as sys comes in unsupported users in logical datagurad.
Is there any way I can execute a script on primary database which won't reflect on secondary database.
thanks in advance.Hi Yoann,
Commands you provided for skipping perfstat schema worked on logical database .
Now i m executing spcreate.sql on secondary database it gives following errors after i have specified the perfstat password,default tablespace for perfstat as 'perfstat' and temporary tablespace for perfstat as 'temp' and datafile contained in perfstat tablespace is 150 MB in size.
spcreate worked fine on primary but is giving errors in the end in secondary.Any suggestions about this:-
Specifying the SYSTEM tablespace will result in the installation
FAILING, as using SYSTEM for performance data is not supported.
TABLESPACE_NAME CONTENTS
LOGMNRTS PERMANENT
PERFSTAT PERMANENT
TEMP TEMPORARY
UNDOTBS1 UNDO
Specify PERFSTAT user's default tablespace
Enter value for default_tablespace: perfstat
Using perfstat for the default tablespace
PL/SQL procedure successfully completed.
User altered.
User altered.
Choose the PERFSTAT user's temporary tablespace.
Specifying the SYSTEM tablespace will result in the installation
FAILING, as using SYSTEM for the temporary tablespace is not recommended.
Specify PERFSTAT user's temporary tablespace.
Enter value for temporary_tablespace: temp
Using temp for the temporary tablespace
PL/SQL procedure successfully completed.
User altered.
NOTE:
SPCUSR complete. Please check spcusr.lis for any errors.
SQL>
SQL> --
SQL> -- Build the tables and synonyms
SQL> connect perfstat/&&perfstat_password
Connected.
SQL> @@spctab
SQL> Rem
SQL> Rem $Header: spctab.sql 16-apr-2002.14:54:46 vbarrier Exp $
SQL> Rem
SQL> Rem spctab.sql
SQL> Rem
SQL> Rem Copyright (c) 1999, 2002, Oracle Corporation. All rights reserved.
SQL> Rem
SQL> Rem NAME
SQL> Rem spctab.sql
SQL> Rem
SQL> Rem DESCRIPTION
SQL> Rem SQL*PLUS command file to create tables to hold
SQL> Rem start and end "snapshot" statistical information
SQL> Rem
SQL> Rem NOTES
SQL> Rem Should be run as STATSPACK user, PERFSTAT
SQL> Rem
SQL> Rem MODIFIED (MM/DD/YY)
SQL> Rem vbarrier 03/20/02 - 2143634
SQL> Rem vbarrier 03/05/02 - Segment Statistics
SQL> Rem cdialeri 02/07/02 - 2218573
SQL> Rem cdialeri 01/30/02 - 2184717
SQL> Rem cdialeri 01/11/02 - 9.2 - features 2
SQL> Rem cdialeri 11/30/01 - 9.2 - features 1
SQL> Rem cdialeri 04/22/01 - Undostat changes
SQL> Rem cdialeri 03/02/01 - 9.0
SQL> Rem cdialeri 09/12/00 - sp_1404195
SQL> Rem cdialeri 04/07/00 - 1261813
SQL> Rem cdialeri 03/20/00 - Support for purge
SQL> Rem cdialeri 02/16/00 - 1191805
SQL> Rem cdialeri 01/26/00 - 1169401
SQL> Rem cdialeri 11/01/99 - Enhance, 1059172
SQL> Rem cmlim 07/17/97 - Added STATS$SQLAREA to store top sql stmts
SQL> Rem gwood 10/16/95 - Version to run as sys without using many view s
SQL> Rem cellis.uk 11/15/89 - Created
SQL> Rem
SQL>
SQL> set showmode off echo off;
If this script is automatically called from spcreate (which is
the supported method), all STATSPACK segments will be created in
the PERFSTAT user's default tablespace.
Using perfstat tablespace to store Statspack objects
... Creating STATS$SNAPSHOT_ID Sequence
create sequence STATS$SNAPSHOT_ID
ERROR at line 1:
ORA-01031: insufficient privileges
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production -
Hello All,
I have the below question concerning Oracle 11gR2 with Dataguard.
I have one primary database and one Logical standby database.
I have a question about the below scenario:
In case the primary database failed I will apply the below steps:
1. Failover to the logical standby database. Now it is reacting as a primary database.
2. I restored and recovered the failed primary database and I want to build it as a Logical standby database.
My question is, in that specific step when I restored and recovered my failed primary database, the restore and recovery process may take me two days for example, and the primary database is restored to a certain SCN, but the clients are connected to another database (the new primary) and they are modifying the data on the new primary database while i am recover my failed primary database, so when i convert my failed primary database to a Logical stand by database.
SQL Apply will automatically know from which SCN should start applying redo logs ?
These logs are applied from both archive logs of the new primary database and from the standby redo logs? since some redo logs may have been archived before overwriting.
And same question when i first create any logical standby database, i will create it from a backup copy of the primary database, so based on what the SQL apply will start applying the redo logs ?
how it can indicate that it should start applying redo logs from a certain point (or SCN)?
One more question:
During switch over: both primary and standby databases will be started up in restricted mode?
Hope my questions are clear.
Regards.
Edited by: NB on Oct 24, 2011 3:17 PM
Edited by: NB on Oct 24, 2011 3:18 PMthe result of your query is below :
Know that i used: WHERE DEST_ID = 3
is that because i defined my parameters as below?
on primary:
log_archive_dest_1 = "LOCATION=C:\app\oracle\oradata\windb\LOG_ARCHIVE_DEST_1 VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=windb"
log_archive_dest_2 = "LOCATION=USE_DB_RECOVERY_FILE_DEST VALID_FOR=(STANDBY_LOGFILE,STANDBY_ROLE)"
log_archive_dest_3 = "SERVICE=dgwindb ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=dgwindb"on standby:
log_archive_dest_1 = "LOCATION=C:\app\oracle\oradata\dgwindb\LOG_ARCHIVE_DEST_1 VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=dgwindb"
log_archive_dest_2 = "LOCATION=USE_DB_RECOVERY_FILE_DEST VALID_FOR=(STANDBY_LOGFILE,STANDBY_ROLE)"
log_archive_dest_3 = "SERVICE=windb ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=windb"
STAND_BY, SEQUENCE#, APPLIED, COMPLETION_TIME
dgwindb 130 YES 10/26/2011 5:47:28 PM
dgwindb 131 YES 10/26/2011 5:47:35 PM
dgwindb 132 YES 10/27/2011 1:11:51 PM
dgwindb 133 YES 10/27/2011 1:11:52 PM
dgwindb 134 YES 10/27/2011 1:11:52 PM
dgwindb 135 YES 10/27/2011 1:11:52 PM
dgwindb 136 YES 10/27/2011 1:11:52 PM
dgwindb 137 YES 10/27/2011 1:11:52 PM
dgwindb 138 YES 10/26/2011 6:28:09 PM
dgwindb 139 YES 10/26/2011 6:35:11 PM
DGWINDB 140 YES 10/27/2011 1:12:48 PM
DGWINDB 141 YES 10/27/2011 1:12:49 PM
DGWINDB 142 YES 10/27/2011 1:12:49 PM
DGWINDB 143 YES 10/27/2011 1:12:49 PM
dgwindb 144 YES 10/26/2011 7:03:21 PM
dgwindb 145 YES 10/26/2011 7:09:22 PM
dgwindb 146 YES 10/26/2011 7:14:24 PM
dgwindb 147 YES 10/27/2011 1:12:57 PM
dgwindb 148 YES 10/27/2011 1:12:57 PM
dgwindb 149 YES 10/26/2011 7:32:29 PM
dgwindb 150 YES 10/26/2011 7:39:31 PM
dgwindb 151 YES 10/26/2011 7:45:34 PM
dgwindb 152 YES 10/27/2011 1:13:07 PM
dgwindb 153 YES 10/27/2011 1:13:07 PM
dgwindb 154 YES 10/26/2011 8:03:39 PM
dgwindb 155 YES 10/26/2011 8:10:41 PM
dgwindb 156 YES 10/27/2011 1:13:23 PM
dgwindb 157 YES 10/27/2011 1:13:23 PM
dgwindb 158 YES 10/27/2011 1:13:23 PM
dgwindb 159 YES 10/27/2011 1:13:24 PM
dgwindb 160 YES 10/27/2011 1:13:23 PM
dgwindb 161 YES 10/27/2011 1:13:24 PM
dgwindb 162 YES 10/27/2011 1:13:23 PM
dgwindb 163 YES 10/27/2011 1:13:23 PM
dgwindb 164 YES 10/26/2011 8:57:55 PM
dgwindb 165 YES 10/26/2011 9:04:10 PM
dgwindb 166 YES 10/27/2011 1:13:35 PM
dgwindb 167 YES 10/27/2011 1:13:35 PM
dgwindb 168 YES 10/26/2011 9:21:12 PM
dgwindb 169 YES 10/26/2011 9:28:16 PM
dgwindb 170 YES 10/27/2011 1:13:43 PM
dgwindb 171 YES 10/27/2011 1:13:43 PM
dgwindb 172 YES 10/27/2011 1:13:43 PM
dgwindb 173 YES 10/27/2011 12:36:29 PM
dgwindb 174 YES 10/27/2011 12:41:41 PM
dgwindb 175 YES 10/27/2011 1:13:52 PM
dgwindb 176 YES 10/27/2011 1:13:52 PM
dgwindb 177 YES 10/27/2011 1:13:52 PM
dgwindb 178 YES 10/27/2011 1:13:52 PM
dgwindb 179 YES 10/27/2011 1:11:44 PM
dgwindb 180 YES 10/27/2011 1:21:19 PM -
Hello. I set up a new dataguard and am receiving errors when I try to start it on my primary. I looked at support note 172779.1 and it says the DB_UNIQUE_NAME needs to match from the log_archive_dest_2 to the db_unique_name of the standby. I think it looks okay but I'm missing something.
10.2.0.5 on Linux RH 5
On primary -
log_archive_dest_1 string location=USE_DB_RECOVERY_FILE_
DEST valid_for=(ALL_LOGFILES,A
LL_ROLES) DB_UNIQUE_NAME=bcso
log_archive_dest_2 string SERVICE=BCSTDBY_40 reopen=60 V
ALID_FOR=(ONLINE_LOGFILES,PRIM
ARY_ROLE) DB_UNIQUE_NAME=stdby
From standby
SQL> show parameter db_name
NAME TYPE VALUE
db_name string bcso
SQL> show parameter db_uniq
NAME TYPE VALUE
db_unique_name string stdby
error on primary
ORA-16047: DGID mismatch between destination setting and standby
Wed Mar 20 16:32:49 GMT 2013
PING[ARC1]: Heartbeat failed to connect to standby 'BCSTDBY_40'. Error is 16047.
Wed Mar 20 16:33:20 GMT 2013
Using STANDBY_ARCHIVE_DEST parameter default value as USE_DB_RECOVERY_FILE_DEST
tnsping BCSTDBY_40
TNS Ping Utility for Linux: Version 10.2.0.5.0 - Production on 20-MAR-2013 16:50:26
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/10.2.0_64/Db_1/network/admin/sqlnet.ora
From primary -
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xxx.40)(PORT = 1611)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = stdby)))
OK (0 msec)
From stdby
tnsping BCSTDBY_39
TNS Ping Utility for Linux: Version 10.2.0.5.0 - Production on 20-MAR-2013 16:52:45
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/10.2.0_64/Db_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xxx.39)(PORT = 1611)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = bcso)))
OK (0 msec)
Edited by: 990192 on Mar 20, 2013 9:55 AMI assume you wanted the spfile contents :) Thanks for helping.
*.AUDIT_SYS_OPERATIONS=TRUE
*.audit_trail='NONE'
*.background_dump_dest='/u01/app/oracle/admin/bcso/bdump'
*.compatible='10.2.0.5.0'
*.control_files='/u01/app/oracle/oradata/bcso/control01.ctl','/u02/oradata/bcso/control02.ctl','/u03/oradata/bcso/control03.ctl'#Restore Controlfile
*.core_dump_dest='/u01/app/oracle/admin/bcso/cdump'
*.db_16k_cache_size=314572800
*.db_2k_cache_size=16777216
*.db_4k_cache_size=16777216
*.db_block_size=8192
*.db_cache_size=1258291200
*.db_domain='world'
*.db_file_multiblock_read_count=16
*.db_name='bcso'
*.db_recovery_file_dest='/u04/flash_recovery_area'
*.db_recovery_file_dest_size=375809638400
*.db_unique_name='stdby'
*.db_writer_processes=3
*.fal_client='stdby'
*.fal_server='bcso'
*.filesystemio_options='setall'
*.GLOBAL_NAMES=TRUE
*.job_queue_processes=0
*.log_archive_config='DG_CONFIG=(bcsst,stdby)'
*.log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=stdby'
*.log_archive_dest_2='SERVICE=BCSTDBY_39 VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=bcso'
*.LOG_ARCHIVE_DEST_STATE_1='ENABLE'
*.LOG_ARCHIVE_DEST_STATE_2='ENABLE'
*.LOG_ARCHIVE_FORMAT='log%t_%s_%r.arc'
*.open_cursors=300
*.os_authent_prefix='BCS3USR$'
*.parallel_execution_message_size=65535
*.pga_aggregate_target=1500M
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.RESOURCE_LIMIT=TRUE
*.sga_target=2000M
*.SQL92_SECURITY=TRUE
*.standby_file_management='auto'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBLS1'
*.user_dump_dest='/u01/app/oracle/admin/bcso/udump'
*.AUDIT_SYS_OPERATIONS=TRUE
*.audit_trail='db'
*.background_dump_dest='/u01/app/oracle/admin/bcso/bdump'
*.compatible='10.2.0.5.0'
*.control_files='/u01/app/oracle/oradata/bcso/control01.ctl','/u02/oradata/bcso/control02.ctl','/u03/oradata/bcso/control03.ctl'
*.core_dump_dest='/u01/app/oracle/admin/bcso/cdump'
*.db_16k_cache_size=335544320
*.db_2k_cache_size=16777216
*.db_4k_cache_size=16777216
*.db_block_size=8192
*.db_cache_size=4G
*.db_domain='world'
*.db_file_multiblock_read_count=16
*.db_name='bcso'
*.db_recovery_file_dest='/u04/flash_recovery_area'
*.db_recovery_file_dest_size=536870912000
*.db_unique_name='BCSO'
*.db_writer_processes=3
*.dbwr_io_slaves=1
*.fal_client='BCSO'
*.fal_server='STDBY'
*.filesystemio_options='SETALL'
*.GLOBAL_NAMES=FALSE
*.job_queue_processes=20
*.log_archive_config='DG_CONFIG=(bcso,stdby)'
*.log_archive_dest_1='location=USE_DB_RECOVERY_FILE_DEST valid_for=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=bcso'
*.log_archive_dest_2='SERVICE=BCSTDBY_40 reopen=60 VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=stdby'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=4
*.open_cursors=300
*.os_authent_prefix='BCS3USR$'
*.parallel_max_servers=100
*.pga_aggregate_target=3336568832
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.RESOURCE_LIMIT=TRUE
*.session_max_open_files=20
*.sga_max_size=9663676416
*.sga_target=10737418240
*.SQL92_SECURITY=TRUE
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS2'
*.user_dump_dest='/u01/app/oracle/admin/bcso/udump'
Maybe you are looking for
-
How can i remove my number from imessage without a iPhone
i lost my iphone so i upgraded and got a galaxy s5. Now when my friends text me from there iphones my number is still registered to imessage. i need to turn off my imessage settings, but i dont have a iphone to do this. i went to the shop and he said
-
Error while rebuilding InterMedia index
While executing "alter index ABC.SAMPLE_INTERMEDIA_INDEX rebuild online parameters( 'sync memory 45M' );", we encounter the following error: java.sql.SQLException: ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine ORA-20000: inter
-
Error: method invokemethod Class not found
To execute vo we have added the following code in my page class files. 1.Vo created name as "MyViewObj" 2.Add code under the AM class as mentioned public void setEmployeeData(){ OAViewObject vo = getMyViewObj(); vo.executeQuery(); 3.Call Method under
-
Mapping of KNA1-BRAN1-5 to CRM
Hello, in ERP you have the Industry Codes 1 - 5 which have each their own field in the table KNA1. So if you enter s.th. in the Industry Code 2 (w/o entering data in Industry Code 1)it is saved in the field KNA1-BRAN2 and it will stay in this field.
-
On my iTunes page it keeps telling me there are updates available but there are not.
In my iTunes account it tells me i have updates available however when i go to do the updates there is nothing to update. Finding this really annoying and would like to get this fixed. Anyone got any tips?