Unable to resync dataguard

Hi everybody!
I have a problem. Some weeks ago I opened a post related to this issue. We have two dataguards with dataguard broker. One of them is resync (thanks to mseberg and this forum) and now I have problems with the other.
Once I have learned how to configure and start/stop dataguard broker, I have a more basic problem, which is to resync it. I follow a process, where I backup the primary with RMAN, I copy the rman files to the other server with the controlfile, at once, I recover with rman again.
The problem is that it is too big, 2 hours for backing it up more or less, and when I restore it, no archivelog list appears being syncronized.
I have followed the same process than the other one and I can't resync it. I think there is something at my params or something new at 11g version...
SQL> show parameters
NAME TYPE VALUE
O7_DICTIONARY_ACCESSIBILITY boolean FALSE
active_instance_count integer
aq_tm_processes integer 0
archive_lag_target integer 0
asm_diskgroups string
asm_diskstring string
asm_power_limit integer 1
asm_preferred_read_failure_groups string
audit_file_dest string /opt/oracle/admin/MN122010P/ad
ump
audit_sys_operations boolean FALSE
audit_syslog_level string
audit_trail string DB
background_core_dump string partial
background_dump_dest string /opt/oracle/diag/rdbms/mn12201
0p/MN122010P/trace
backup_tape_io_slaves boolean FALSE
bitmap_merge_area_size integer 1048576
blank_trimming boolean FALSE
buffer_pool_keep string
buffer_pool_recycle string
cell_offload_compaction string ADAPTIVE
cell_offload_parameters string
cell_offload_plan_display string AUTO
cell_offload_processing boolean TRUE
cell_partition_large_extents string DEFAULT
circuits integer
client_result_cache_lag big integer 3000
client_result_cache_size big integer 0
cluster_database boolean FALSE
cluster_database_instances integer 1
cluster_interconnects string
commit_logging string
commit_point_strength integer 1
commit_wait string
commit_write string
compatible string 11.1.0.0.0
control_file_record_keep_time integer 7
control_files string /opt/oracle/oradata/MN122010P/
controlfile/control01.ctl, /op
t/oracle/oradata1/MN122010P/co
ntrolfile/control02.ctl
control_management_pack_access string DIAGNOSTIC+TUNING
core_dump_dest string /opt/oracle/diag/rdbms/mn12201
0p/MN122010P/cdump
cpu_count integer 4
create_bitmap_area_size integer 8388608
create_stored_outlines string
cursor_sharing string EXACT
cursor_space_for_time boolean FALSE
db_16k_cache_size big integer 0
db_2k_cache_size big integer 0
db_32k_cache_size big integer 0
db_4k_cache_size big integer 0
db_8k_cache_size big integer 0
db_block_buffers integer 0
db_block_checking string FALSE
db_block_checksum string TYPICAL
db_block_size integer 8192
db_cache_advice string ON
db_cache_size big integer 0
db_create_file_dest string /opt/oracle/oradata
db_create_online_log_dest_1 string /opt/oracle/oradata
db_create_online_log_dest_2 string /opt/oracle/oradata1
db_create_online_log_dest_3 string
db_create_online_log_dest_4 string
db_create_online_log_dest_5 string
db_domain string domain.es
db_file_multiblock_read_count integer 69
db_file_name_convert string
db_files integer 200
db_flashback_retention_target integer 1440
db_keep_cache_size big integer 0
db_lost_write_protect string NONE
db_name string MN122010
db_recovery_file_dest string /opt/oracle/oradata/flash_reco
very_area
db_recovery_file_dest_size big integer 100G
db_recycle_cache_size big integer 0
db_securefile string PERMITTED
db_ultra_safe string OFF
db_unique_name string MN122010P
db_writer_processes integer 1
dbwr_io_slaves integer 0
ddl_lock_timeout integer 0
dg_broker_config_file1 string /opt/oracle/product/db111/dbs/
dr1MN122010P.dat
dg_broker_config_file2 string /opt/oracle/product/db111/dbs/
dr2MN122010P.dat
dg_broker_start boolean FALSE
diagnostic_dest string /opt/oracle
disk_asynch_io boolean TRUE
dispatchers string (PROTOCOL=TCP) (SERVICE=MN1220
10PXDB)
distributed_lock_timeout integer 60
dml_locks integer 844
drs_start boolean FALSE
enable_ddl_logging boolean FALSE
event string
fal_client string
fal_server string
fast_start_io_target integer 0
fast_start_mttr_target integer 0
fast_start_parallel_rollback string LOW
file_mapping boolean FALSE
fileio_network_adapters string
filesystemio_options string none
fixed_date string
gc_files_to_locks string
gcs_server_processes integer 0
global_context_pool_size string
global_names boolean FALSE
global_txn_processes integer 1
hash_area_size integer 131072
hi_shared_memory_address integer 0
hs_autoregister boolean TRUE
ifile file
instance_groups string
instance_name string MN122010P
instance_number integer 0
instance_type string RDBMS
java_jit_enabled boolean TRUE
java_max_sessionspace_size integer 0
java_pool_size big integer 0
java_soft_sessionspace_limit integer 0
job_queue_processes integer 1000
large_pool_size big integer 0
ldap_directory_access string NONE
ldap_directory_sysauth string no
license_max_sessions integer 0
license_max_users integer 0
license_sessions_warning integer 0
local_listener string LISTENER_MN122010P
lock_name_space string
lock_sga boolean FALSE
log_archive_config string dg_config=(MN122010P,MN122010R
,MN12201R)
log_archive_dest string
log_archive_dest_1 string location="USE_DB_RECOVERY_FILE
_DEST", valid_for=(ALL_LOGFIL
ES,ALL_ROLES)
log_archive_dest_10 string
log_archive_dest_2 string service=MN12201R, LGWR SYNC AF
FIRM delay=0 OPTIONAL compress
ion=DISABLE max_failure=0 max_
connections=1 reopen=300 db_
unique_name=MN12201R net_timeo
ut=30 valid_for=(online_logfi
le,primary_role)
log_archive_dest_3 string
log_archive_dest_4 string
log_archive_dest_5 string
log_archive_dest_6 string
log_archive_dest_7 string
log_archive_dest_8 string
log_archive_dest_9 string
log_archive_dest_state_1 string ENABLE
log_archive_dest_state_10 string enable
log_archive_dest_state_2 string ENABLE
log_archive_dest_state_3 string ENABLE
log_archive_dest_state_4 string enable
log_archive_dest_state_5 string enable
log_archive_dest_state_6 string enable
log_archive_dest_state_7 string enable
log_archive_dest_state_8 string enable
log_archive_dest_state_9 string enable
log_archive_duplex_dest string
log_archive_format string %t_%s_%r.dbf
log_archive_local_first boolean TRUE
log_archive_max_processes integer 4
log_archive_min_succeed_dest integer 1
log_archive_start boolean FALSE
log_archive_trace integer 0
log_buffer integer 7668736
log_checkpoint_interval integer 0
log_checkpoint_timeout integer 1800
log_checkpoints_to_alert boolean FALSE
log_file_name_convert string
max_commit_propagation_delay integer 0
max_dispatchers integer
max_dump_file_size string unlimited
max_enabled_roles integer 150
max_shared_servers integer
memory_max_target big integer 512M
memory_target big integer 512M
nls_calendar string
nls_comp string BINARY
nls_currency string
nls_date_format string
nls_date_language string
nls_dual_currency string
nls_iso_currency string
nls_language string AMERICAN
nls_length_semantics string BYTE
nls_nchar_conv_excp string FALSE
nls_numeric_characters string
nls_sort string
nls_territory string AMERICA
nls_time_format string
nls_time_tz_format string
nls_timestamp_format string
nls_timestamp_tz_format string
object_cache_max_size_percent integer 10
object_cache_optimal_size integer 102400
olap_page_pool_size big integer 0
open_cursors integer 300
open_links integer 4
open_links_per_instance integer 4
optimizer_capture_sql_plan_baselines boolean FALSE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 11.1.0.7
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
optimizer_secure_view_merging boolean TRUE
optimizer_use_invisible_indexes boolean FALSE
optimizer_use_pending_statistics boolean FALSE
optimizer_use_sql_plan_baselines boolean TRUE
os_authent_prefix string ops$
os_roles boolean FALSE
parallel_adaptive_multi_user boolean TRUE
parallel_automatic_tuning boolean FALSE
parallel_execution_message_size integer 2152
parallel_instance_group string
parallel_io_cap_enabled boolean FALSE
parallel_max_servers integer 40
parallel_min_percent integer 0
parallel_min_servers integer 0
parallel_server boolean FALSE
parallel_server_instances integer 1
parallel_threads_per_cpu integer 2
pga_aggregate_target big integer 0
plscope_settings string IDENTIFIERS:NONE
plsql_ccflags string
plsql_code_type string INTERPRETED
plsql_debug boolean FALSE
plsql_native_library_dir string
plsql_native_library_subdir_count integer 0
plsql_optimize_level integer 2
plsql_v2_compatibility boolean FALSE
plsql_warnings string DISABLE:ALL
pre_page_sga boolean FALSE
processes integer 170
query_rewrite_enabled string TRUE
query_rewrite_integrity string enforced
rdbms_server_dn string
read_only_open_delayed boolean FALSE
recovery_parallelism integer 0
recyclebin string on
redo_transport_user string
remote_dependencies_mode string TIMESTAMP
remote_listener string
remote_login_passwordfile string EXCLUSIVE
remote_os_authent boolean FALSE
remote_os_roles boolean FALSE
replication_dependency_tracking boolean TRUE
resource_limit boolean FALSE
resource_manager_cpu_allocation integer 4
resource_manager_plan string
result_cache_max_result integer 5
result_cache_max_size big integer 1312K
result_cache_mode string MANUAL
result_cache_remote_expiration integer 0
resumable_timeout integer 0
rollback_segments string
sec_case_sensitive_logon boolean TRUE
sec_max_failed_login_attempts integer 10
sec_protocol_error_further_action string CONTINUE
sec_protocol_error_trace_action string TRACE
sec_return_server_release_banner boolean FALSE
serial_reuse string disable
service_names string MN122010P.domain.es
session_cached_cursors integer 50
session_max_open_files integer 10
sessions integer 192
sga_max_size big integer 512M
sga_target big integer 0
shadow_core_dump string partial
shared_memory_address integer 0
shared_pool_reserved_size big integer 10066329
shared_pool_size big integer 0
shared_server_sessions integer
shared_servers integer 1
skip_unusable_indexes boolean TRUE
smtp_out_server string
sort_area_retained_size integer 0
sort_area_size integer 65536
spfile string /opt/oracle/product/db111/dbs/
spfileMN122010P.ora
sql92_security boolean FALSE
sql_trace boolean FALSE
sql_version string NATIVE
sqltune_category string DEFAULT
standby_archive_dest string ?/dbs/arch
standby_file_management string AUTO
star_transformation_enabled string FALSE
statistics_level string TYPICAL
streams_pool_size big integer 0
tape_asynch_io boolean TRUE
thread integer 0
timed_os_statistics integer 0
timed_statistics boolean TRUE
trace_enabled boolean TRUE
tracefile_identifier string
transactions integer 211
transactions_per_rollback_segment integer 5
undo_management string AUTO
undo_retention integer 900
undo_tablespace string UNDOTBS1
use_indirect_data_buffers boolean FALSE
user_dump_dest string /opt/oracle/diag/rdbms/mn12201
0p/MN122010P/trace
utl_file_dir string
workarea_size_policy string AUTO
xml_db_events string enable
I have tested the connectivity between them and it's ok, I recreated the password file
[oracle@servername01 MN122010P]$ sqlplus "sys/[email protected] as sysdba"
SQL> select * from v$instance;
INSTANCE_NUMBER INSTANCE_NAME
HOST_NAME
VERSION STARTUP_T STATUS PAR THREAD# ARCHIVE LOG_SWITCH_WAIT
LOGINS SHU DATABASE_STATUS INSTANCE_ROLE ACTIVE_ST BLO
1 MN122010P
servername01
11.1.0.7.0 09-OCT-11 OPEN NO 1 STARTED
ALLOWED NO ACTIVE PRIMARY_INSTANCE NORMAL NO
[oracle@servername01 MN122010P]$ sqlplus "sys/[email protected] as sysdba"
SQL> select * from v$instance;
INSTANCE_NUMBER INSTANCE_NAME
HOST_NAME
VERSION STARTUP_T STATUS PAR THREAD# ARCHIVE LOG_SWITCH_WAIT
LOGINS SHU DATABASE_STATUS INSTANCE_ROLE ACTIVE_ST BLO
1 MN12201R
servername02
11.1.0.7.0 28-NOV-11 MOUNTED NO 1 STARTED
ALLOWED NO ACTIVE PRIMARY_INSTANCE NORMAL NO
Recovery Manager: Release 11.1.0.7.0 - Production on Thu Dec 1 10:16:23 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN> connect target /
connected to target database: MN122010 (DBID=2440111267)
RMAN> run{
ALLOCATE CHANNEL d1 DEVICE TYPE DISK FORMAT '/opt/oracle/oradata/BACKUPS_01/MN122010P/backup_%d_t%t_s%s_p%p';
BACKUP DATABASE PLUS ARCHIVELOG;
2> 3> 4>
using target database control file instead of recovery catalog
allocated channel: d1
channel d1: SID=140 device type=DISK
Starting backup at 01-DEC-11
current log archived
channel d1: starting archived log backup set
channel d1: specifying archived log(s) in backup set
input archived log thread=1 sequence=4117 RECID=7260 STAMP=766935608
input archived log thread=1 sequence=4118 RECID=7261 STAMP=766935619
input archived log thread=1 sequence=4119 RECID=7262 STAMP=766935630
input archived log thread=1 sequence=4120 RECID=7263 STAMP=766935635
....List of archives....
Starting backup at 01-DEC-11
channel d1: starting full datafile backup set
channel d1: specifying datafile(s) in backup set
input datafile file number=00010 name=/opt/oracle/oradata/MN122010P/TBCESPANDM_01.DBF
input datafile file number=00009 name=/opt/oracle/oradata/MN122010P/CESPAROUTING_01.DBF
input datafile file number=00007 name=/opt/oracle/oradata/MN122010P/TBCESPACALLEJERO_01.DBF
input datafile file number=00008 name=/opt/oracle/oradata/MN122010P/CESPAGEOCODER_01.DBF
input datafile file number=00001 name=/opt/oracle/oradata/MN122010P/system01.dbf
input datafile file number=00002 name=/opt/oracle/oradata/MN122010P/sysaux01.dbf
input datafile file number=00003 name=/opt/oracle/oradata/MN122010P/undotbs01.dbf
input datafile file number=00006 name=/opt/oracle/oradata/MN122010P/TBCESPAFONDO_01.DBF
input datafile file number=00005 name=/opt/oracle/oradata/MN122010P/TBCESPAPOIS_01.DBF
input datafile file number=00004 name=/opt/oracle/oradata/MN122010P/users01.dbf
channel d1: starting piece 1 at 01-DEC-11
channel d1: finished piece 1 at 01-DEC-11
piece handle=/opt/oracle/oradata/BACKUPS_01/MN122010P/backup_MN122010_t768739341_s768_p1 tag=TAG20111201T104221 comment=NONE
channel d1: backup set complete, elapsed time: 00:39:26
Finished backup at 01-DEC-11
Starting backup at 01-DEC-11
current log archived
channel d1: starting archived log backup set
channel d1: specifying archived log(s) in backup set
input archived log thread=1 sequence=4256 RECID=7399 STAMP=768741707
channel d1: starting piece 1 at 01-DEC-11
channel d1: finished piece 1 at 01-DEC-11
piece handle=/opt/oracle/oradata/BACKUPS_01/MN122010P/backup_MN122010_t768741708_s769_p1 tag=TAG20111201T112148 comment=NONE
channel d1: backup set complete, elapsed time: 00:00:01
Finished backup at 01-DEC-11
Starting Control File and SPFILE Autobackup at 01-DEC-11
piece handle=/opt/oracle/product/db111/dbs/c-2440111267-20111201-00 comment=NONE
Finished Control File and SPFILE Autobackup at 01-DEC-11
released channel: d1
I made a alter database create standby controlfile as at Primary and at Standby:
SQL> shutdown immediate;
ORA-01109: base de datos sin abrir
Base de datos desmontada.
Instancia ORACLE cerrada.
SQL> startup nomount;
Instancia ORACLE iniciada.
Total System Global Area 2937555928 bytes
Fixed Size 744408 bytes
Variable Size 1862270976 bytes
Database Buffers 1073741824 bytes
Redo Buffers 798720 bytes
copy the controlfile to standby controlfile locations
startup standby
ALTER DATABASE MOUNT STANDBY DATABASE;
And restoring with rman
Restoring
List of Archived Logs in backup set 616
Thrd Seq Low SCN Low Time Next SCN Next Time
1 4256 27049296 01-DEC-11 27052551 01-DEC-11
RMAN> run{
2> allocate channel c1 type disk format '/opt/oracle/oradata/BACKUPS_01/MN122010P/backup_%d_t%t_s%s_p%p';
3> restore database;
4> recover database until sequence 4256 thread 1;
5> sql 'alter database recover managed standby database disconnect from session';
6> release channel c1;
7> }
allocated channel: c1
channel c1: SID=164 device type=DISK
Starting restore at 01-DEC-11
Starting implicit crosscheck backup at 01-DEC-11
Crosschecked 115 objects
Finished implicit crosscheck backup at 01-DEC-11
Starting implicit crosscheck copy at 01-DEC-11
Crosschecked 24 objects
Finished implicit crosscheck copy at 01-DEC-11
searching for all files in the recovery area
cataloging files...
no files cataloged
channel c1: starting datafile backup set restore
channel c1: specifying datafile(s) to restore from backup set
channel c1: restoring datafile 00001 to /opt/oracle/oradata/MN122010P/system01.dbf
channel c1: restoring datafile 00002 to /opt/oracle/oradata/MN122010P/sysaux01.dbf
channel c1: restoring datafile 00003 to /opt/oracle/oradata/MN122010P/undotbs01.dbf
channel c1: restoring datafile 00004 to /opt/oracle/oradata/MN122010P/users01.dbf
channel c1: restoring datafile 00005 to /opt/oracle/oradata/MN122010P/TBCESPAPOIS_01.DBF
channel c1: restoring datafile 00006 to /opt/oracle/oradata/MN122010P/TBCESPAFONDO_01.DBF
channel c1: restoring datafile 00007 to /opt/oracle/oradata/MN122010P/TBCESPACALLEJERO_01.DBF
channel c1: restoring datafile 00008 to /opt/oracle/oradata/MN122010P/CESPAGEOCODER_01.DBF
channel c1: restoring datafile 00009 to /opt/oracle/oradata/MN122010P/CESPAROUTING_01.DBF
channel c1: restoring datafile 00010 to /opt/oracle/oradata/MN122010P/TBCESPANDM_01.DBF
channel c1: reading from backup piece /opt/oracle/oradata/BACKUPS_01/MN122010P/backup_MN122010_t768739341_s768_p1
After the restoring I found at standby that no archives have been applied:
SQL> SELECT SEQUENCE#, FIRST_TIME, NEXT_TIME,APPLIED
FROM V$ARCHIVED_LOG ORDER BY SEQUENCE#
/ 2 3
no rows selected
SQL> select * from v$Instance;
INSTANCE_NUMBER INSTANCE_NAME
HOST_NAME
VERSION STARTUP_T STATUS PAR THREAD# ARCHIVE LOG_SWITCH_WAIT
LOGINS SHU DATABASE_STATUS INSTANCE_ROLE ACTIVE_ST BLO
1 MN12201R
server02
11.1.0.7.0 01-DEC-11 MOUNTED NO 1 STARTED
ALLOWED NO ACTIVE PRIMARY_INSTANCE NORMAL NO
SQL> select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
7 rows selected.
On primary
MESSAGE
ARC3: Beginning to archive thread 1 sequence 4258 (27056314-27064244)
ARC3: Completed archiving thread 1 sequence 4258 (27056314-27064244)
ARC0: Beginning to archive thread 1 sequence 4259 (27064244-27064251)
ARC0: Completed archiving thread 1 sequence 4259 (27064244-27064251)
ARC2: Beginning to archive thread 1 sequence 4260 (27064251-27064328)
ARC2: Completed archiving thread 1 sequence 4260 (27064251-27064328)
ARC3: Beginning to archive thread 1 sequence 4261 (27064328-27064654)
ARC3: Completed archiving thread 1 sequence 4261 (27064328-27064654)
Edited by: user8898355 on 01-dic-2011 7:02

I'm seeing those errors at primary
LNSb started with pid=20, OS id=30141
LGWR: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (16086)
LGWR: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
trace file:
*** 2011-12-02 09:52:17.164
*** SESSION ID:(183.1) 2011-12-02 09:52:17.164
*** CLIENT ID:() 2011-12-02 09:52:17.164
*** SERVICE NAME:(SYS$BACKGROUND) 2011-12-02 09:52:17.164
*** MODULE NAME:() 2011-12-02 09:52:17.164
*** ACTION NAME:() 2011-12-02 09:52:17.164
*** TRACE FILE RECREATED AFTER BEING REMOVED ***
*** 2011-12-02 09:52:17.164 6465 krsu.c
Initializing NetServer[LNSb] for dest=MN12201R.domain.es mode SYNC
LNSb is not running anymore.
New SYNC LNSb needs to be started
Waiting for subscriber count on LGWR-LNSb channel to go to zero
Subscriber count went to zero - time now is <12/02/2011 09:52:17>
Starting LNSb ...
Waiting for LNSb [pid 30141] to initialize itself
*** TRACE FILE RECREATED AFTER BEING REMOVED ***
*** 2011-12-02 09:52:17.164 6465 krsu.c
Initializing NetServer[LNSb] for dest=MN12201R.domain.es mode SYNC
LNSb is not running anymore.
New SYNC LNSb needs to be started
Waiting for subscriber count on LGWR-LNSb channel to go to zero
Subscriber count went to zero - time now is <12/02/2011 09:52:17>
Starting LNSb ...
Waiting for LNSb [pid 30141] to initialize itself
*** 2011-12-02 09:52:20.185
*** 2011-12-02 09:52:20.185 6828 krsu.c
Netserver LNSb [pid 30141] for mode SYNC has been initialized
Performing a channel reset to ignore previous responses
Successfully started LNSb [pid 30141] for dest MN12201R.domain.es mode SYNC ocis=0x2ba2cb1fece8
*** 2011-12-02 09:52:20.185 2880 krsu.c
Making upiahm request to LNSb [pid 30141]: Begin Time is <12/02/2011 09:52:17>. NET_TIMEOUT = <30> seconds
Waiting for LNSb to respond to upiahm
*** 2011-12-02 09:52:20.262 3044 krsu.c
upiahm connect done status is 0
Receiving message from LNSb
Receiving message from LNSb
LGWR: Failed
rfsp: 0x2ba2ca55c328
rfsmod: 2
rfsver: 3
rfsflag: 0x24882

Similar Messages

HT204120 i deleted the photos from the location on my pc after i got them on my iphone so i am unable to deselect and remove them as per you helped me ?? what can i do further

i was somewhat helped. but still i am getting problem to delete my photos that i synced last night via itunes on my pc. problem is i deleted the photos from the location on pc after getting them on my device, so i am unable to resync them, deselect and remove them as per i was helped by this communities i am new to use apple products so please help me as it has taken lot of memory in my device/

you say:- You need to keep the photos on the computer, since the ones that are synced to the iPhone are of reduced resolution and cannot be moved anywhere else. You can always remove the other folder if you do not want it.
BUT I DONT HAVE THE PHOTOS ON MY DEVICE(MY PC) I DELETED THEM.
further i tried this:-If you do not have another folder of photos that you can sync, then create an empty folder on the computer and sync that folder. That will delete the photos from the iPhone, then you can go back to iTunes, remove the checkmark by the empty folder and sync again, removing that folder from the iPhone.
Trying this it just removed the checkmark nothing else it did
i think i have no other option rather than to keep those synced photos on my device>

ORA-29275: partial multibyte character

Hi,
We have a database having three instances dev,stage and prod. We need to fetch data from other remote DB respective instances. for eg dev instance on our DB fetches data from dev instance of remote DB. But I am getting ORA-29275: partial multibyte character for one particular query in prod instance only.
Please advice.
Thanks,
Sanchita

Hi;
What is DB version? What is OS? Is there any error message in alert log?
Please see below notes:
Unable to resync due to ORA-29275: partial multibyte character [ID 394166.1]
Bug 6268409 - ORA-29275 error when querying the sql_redo/undo columns of V$LOGMNR_CONTENTS [ID 6268409.8]
ORA-29275 When Querying V$LOGMNR_CONTENTS [ID 562991.1]
Regard
Helios

SSL / TLS problem connet to iTunes?

Im not able to sync my iPhone
every time it opens in itunes says WE COULD NOT COMPLETE YOUR ITUNES STORE REQUEST A SECURE NETWORK CONNECTION COULD NOT BE ESTABLISHED. MAKE SURE SSL 3.0 OR TLS 1.0 IS ENABLED IN THE INTERNET THEN TRY AGAIN
I Use Windows VIsta, and DDL3 and TLS 1.0 are activaded...
Bug in Vista?
Anyone know how to solve?
I would be very greatful i cant wait to use have my music and pictures on my iphone
Johan

I have the exact same issue as Johanlondon. However I use Windows XP. My iPhone synced orginally and I had no issues. And then b/c of an issue with my iPhone (not being able to type text messages) I tried to restore my iphone. Upon doing so i was unable to resync. I got the message, "WE COULD NOT COMPLETE YOUR ITUNES STORE REQUEST A SECURE NETWORK CONNECTION COULD NOT BE ESTABLISHED. MAKE SURE SSL 3.0 OR TLS 1.0 IS ENABLED IN THE INTERNET THEN TRY AGAIN". I made sure that SSL 3.0 and TLS 1.0 were activaded in internet explorer. I even tried my wifes iPhone and it still syncs. I've reinstalled everything (Internet explorer/iTunes). I even uninstalled IE and loaded Safari 3.0 for windows. Still nothing works. So thought it must be the phone. I returned my iPhone to the Apple store (to be fixed) and when I brought my loaner phone home it would not sync either. What the he11 is going on?

Sync-around

Hello,
I had to reconfig my computer yesterday and I am now unable to sync my iPod to my newly downloaded iTunes even though it is on the same computer. I was unable to backup my info. before the reconfig. I don't understand how you can sync your iPod to multiple computers yet I am unable to resync to my newly reconfigured computer. Help! I've got over 2000 songs on my iPod and nowhere to sync! :o(
Right now I only had my iPod syncing to my home computer. Would it be possible to download iTunes at work, sync my iPod and then go back to my home computer, clear the iPod as it suggests, go back to work and sync everything back to my iPod and then sync again at home? blah blah blah. I just want my music back on my home computer???
Any info would be great appreciated.
PS. I thought the iPod was its own little hard drive. Why is it so difficult to start a fresh sync to the same users library?

i'm not sure from your post whether or not you actually saved the music that was on your computer when you "reconfigured" it. I presume by reconfigure you mean you reinstalled Windows. If your iTunes is now blank try this:
1). Connect your iPod to your computer. If it is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod.
2). When your iPod appears in the iTunes source list change the update setting to manual, that will let you use our iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default: Managing content manually on iPod and iPhone
3). Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. There are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can read reviews and comparisons of some of them here:
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
TuneJack Windows Only (iPhone and iPod Touch compatible)
SharePod Windows Only (iPhone and iPod Touch compatible)
iPod2PC Windows Only
iDump Windows Only
iPodRip Mac & Windows
YamiPod Mac and Windows
Music Rescue Mac & Windows
iPod Music Liberator Mac & Windows
Floola Mac & Windows
iGadget Mac & Windows (iPhone and iPod Touch compatible)
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
If you have any iTunes Music Store purchases the transfer of purchased content only from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
4). Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync.
5). I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay: Back up your iTunes library by copying to an external hard drive

AS Guard switchover failed.

OS : hpux B11.11
Oracle AS infrastructure 10.1.2.0.0
ASG toolkit 10.1.2.0.2
Situation: Infrastructure installed on both production and standby machines, the ASG relation can be built. Then I use the following command to try the switchover:
==============================================
$ asgctl.sh
Application Server Guard: Release 10.1.2.0.2
(c) Copyright 2004, 2005 Oracle Corporation. All rights reserved.
ASGCTL> connect asg production ias_admin/password
Successfully connected to localhost:7890
ASGCTL> set primary database sys/password@infradb
ASGCTL> switchover topology to [standby]
==============================================
The AS config and the database can be Synchronized. Then
the opmn services start on standby machince, error existed.
==============================================
customs2:7890 (home /as_db/app/oracle/product/10.1.0/infradev)
Starting each instance in the topology
Starting component OID
Starting component dcm-daemon
Configuring the backup script
Executing restore_config -F DCM-resyncforce option in bkp_restore.pl script
customs2: -->ASG_IAS-15701: Failed to restore configuration with the DCM-resyncforce option for instance "infradev.customs2.is.customs.hksarg"
customs2: -->ASG_IAS-15690: Error running the restore script
customs2: -->ASG_DUF-4040: Error executing the external program or script. The error code is "255"
customs2: -->ASG_SYSTEM-100: Problem running command (Returned 1)
customs2: -->ASG_SYSTEM-100: /as_db/app/oracle/product/10.1.0/infradev/dcm/bin/dcmctl resyncinstance -script -force
customs2: -->ASG_SYSTEM-100: Unable to resync the instance using dcmctl !!!
customs2: -->ASG_SYSTEM-100: Failure: restore_config failed
customs2: -->ASG_SYSTEM-100: See /as_db/app/oracle/product/10.1.0/infradev/dsa/backup/log/2007-01-29_16-32-05_restore_config.log for more info.
customs2: -->ASG_SYSTEM-100: Use of uninitialized value in split at /as_db/app/oracle/product/10.1.0/infradev/perl/lib/5.6.1/Cwd.pm line 103.
Executing opmnctl startall command
==============================================
I check the opmn log ($ORACLE_HOME/opmn/logs/opmn.log) and find the following messages:
==============================================
OPMN worker process exited with status 4. Restarting
In line 2 of $ORACLE_HOME/opmn/conf/opmn.xml:
LPX-00224: multiple occurrences of attribute "xmlns" found
XML parse failed: error 224.
==============================================
I fixed the file $ORACLE_HOME/opmn/conf/opmn.xml and run the command
$ORACLE_HOME/dcm/bin/dcmctl resyncinstance -script -force
but the error still exists, the command create a new opmn.xml every time.
Any ideas about this problem? Help greatly appreciated.

Hi John,
Please let me know the post install you did to get Standalone ASG working. I installed standalone ASG for the first time so I was confused with the workaround given in 429530.1. How can I rename jazn.xml to original name as this is the first installation of ASG and not an upgrade... I got following error after performing workaround as per 429530.1.
ASGCTL> connect asg d-4148.kpit.com ias_admin/********
d-4148: -->ASG_DUF-4950: An error occurred on host "d-4148" with IP "10.10.24.74
" and port "7891"
d-4148: -->ASG_DUF-3020: Failed to authenticate user "ias_admin". Please enter the correct user name and password.
[email protected]

Internet gone down.

Hello, I'm writing via phone as of late last night my net suddenly went down. At the time I was playing an online game when I lost connection and haven't been able to reconnect since. I checked cables all fine, went through the troubleshooting process to no success. Tried resetting the home hub 3 etc nothing. Gave up and hoped it would fix its self this morning.
Sadly not, rang the area check number no faults in my area(Plymouth) I'm lost, hoping to get help online before having to deal with India.
Here's exactly what happened, in online game when broadband light goes off and flashes orange, does not reconnect. Attemp to troubleshoot and fail, from this point broadband light is off completely as well as lan1 light on modem also off. Checked cable by plugging directly into pc and lan1 light comes on, plug back into hub3 no lan light no broadband light.
Any ideas please ? There are 3 of us which use the internet so getting it back up asap is important to me.
Sorry for writing using phone. Thanks.

You probably had a burst of noise that dropped sync and made DLM decide to put you on interleaved. Not at all sure why the modem was unable to resync without a reset: no machine/firmware is perfect. If there was a modem malfunction, that might even have caused the problem seen by DLM.
Is the modem vertical and in a well ventilated place. They can get quite warm and that could cause malfunction.
Assuming all goes well from now on, DLM should see your line as good and put you back on fastpath eventually. It can take quite a long time though. 2 to 3 weeks is typical for getting full speed back again; I guess removing interleaving will be a similar timescale.
The advice never to touch the modem generally remains correct; though obvioulsy not in your case. It's difficult to know when to make the exception though. The modem LAN1 behaviour you saw is very odd; but does (incorrectly) point more to the HomeHub being the problem than the modem.

11gr2 Dataguard Active Standby - Unable to get Real-Time apply working

As above, I am unable to get real time apply to work WITHOUT it switching my standby back to MOUNT state. There does not seem to be anyting obvious from the broker, or alert logs.
On the Standby:
SQL> alter database recover managed standby database cancel;
Database altered.
SQL> alter database open read only;
Database altered.
SQL> select open_mode from v$database;
OPEN_MODE
READ ONLY
SQL> alter database recover managed standby database using current logfile disconnect;
Database altered.
SQL> select open_mode from v$database;
OPEN_MODE
MOUNTED
Primary:-
SQL> SELECT status, recovery_mode FROM v$archive_dest_status where dest_name = 'LOG_ARCHIVE_DEST_2';
STATUS RECOVERY_MODE
VALID MANAGED REAL TIME APPLY
Edited by: Imran on Apr 17, 2012 10:56 PM

Hello;
This is expected.
Works the same exact way on my system. How Redo Data is applied is set when the database is MOUNTED.
See - 6 Redo Apply Services
Data Guard Concepts and Administration 11g Release 2 (11.2) E10700-0
The document is vague on this at best, but think about the error you get if you try to start apply twice.
Data Guard Real-Time Apply FAQ [ID 828274.1]
Best Regards
mseberg
Edited by: mseberg on Apr 17, 2012 10:04 AM
h1. Test
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> alter database recover managed standby database cancel;
Database altered.
SQL> alter database open read only;
Database altered.
SQL> alter database recover managed standby database using current logfile disconnect;
Database altered.
SQL> select open_mode from v$database;
OPEN_MODE
READ ONLY WITH APPLY
SQL> So I get different results ??
Edited by: mseberg on Apr 17, 2012 10:40 AM
h2. Still more
I would like to change my answer. Based on my test and queries as shown below I believe REAL TIME apply is working. Note the last log says NO because its in progress.
Checking last sequence in v$archived_log
STANDBY               SEQUENCE# APPLIED    COMPLETIO
STANDBY                     343 YES        16-APR-12
STANDBY                     344 YES        16-APR-12
STANDBY                     345 YES        16-APR-12
STANDBY                     346 YES        16-APR-12
STANDBY                     347 YES        17-APR-12
STANDBY                     348 NO         17-APR-12
6 rows selected.
----------------Last log on Primary--------------------------------------|
MAX(SEQUENCE#)
           348
1 row selected.Yes, I doubled check and it works on mine. I guess I read what I wanted to read.
All my Standby redo are setup correctly ( size and numbers )
READ ONLY WITH APPLYYour answer my be the Uwe answer at the end of this thread :
Enabling the Active Dataguard and Real Time Apply
Best Regards
mseberg
Edited by: mseberg on Apr 17, 2012 10:50 AM

RMAN catalog resync in Dataguard environment

Hello,
I have a quick question regarding the resync of the recovery Catalog in a 10g Dataguard environment...
I plan to perform the backups from the physical standby side. (Backups of DB and archives).
If I want to restore/recover a datafile on the primary side, do I automatically see the backup information once i am connected to the catalog DB, or do I have to perform a "resync catalog;" statement to resync the control file of the primary side with the actual backup information from the catalog?
Thanks in advance,
Boris...

But what is the effect, if I perform this statement on the primary side? Do I loose backup information if I perform a resync of the catalog because the backups were made from standby side? If I perform all backups from standby side the control file on the primary side does not know about the backups.
I am asking because I want to know if I have to adjust the backupscripts. They perform a resync of catalog per default.
Thx, Boris..

Dataguard Error in logs Unable to post result to client, status = ORA-16531

Hi,
we are getting the following error message in the data guard logs:
===================================================================
DG 2012-01-23-17:39:44 0 2 0 DMON: Failed to publish large message. Error is 0xffffff81
DG 2012-01-23-17:39:44 0 2 0 Status = ORA-00000
DG 2012-01-23-17:39:44 0 2 0 Severity = ORA-00000
DG 2012-01-23-17:39:44 1000 2 771584732 Unable to post result to client, status = ORA-16531
DG 2012-01-23-17:39:45 0 2 0 DMON: Failed to publish large message. Error is 0xffffff81
DG 2012-01-23-17:39:45 0 2 0 Status = ORA-00000
DG 2012-01-23-17:39:45 0 2 0 Severity = ORA-00000
DG 2012-01-23-17:39:45 1000 2 771584747 Unable to post result to client, status = ORA-16531
DG 2012-01-23-17:39:45 0 2 0 DMON: Failed to publish large message. Error is 0xffffff81
DG 2012-01-23-17:39:45 0 2 0 Status = ORA-00000
DG 2012-01-23-17:39:45 0 2 0 Severity = ORA-00000
DG 2012-01-23-17:39:45 1000 2 771584756 Unable to post result to client, status = ORA-16531
===============================================================================
This is the LIVE system working properly, but i saw this error message in the logs and when i searched lot of sites for the ORA-16531,i got the reply as "COntact Oracle".
COuld you please anyone incase faced this error in data gurad server, share your experience here?
Server : Sun SOlaris SParc Netra -T2000
Database : Oracle 10g
# FDSCluster info
Cluster: vs2b
Member: Member1
User: fdsuser
Data Path: /var/opt/fds
Status: Running
# srvctl status asm -n `hostname`
ASM instance +ASM2 is running on node vs2b.
Guys please gimme some clue why iam getting this error mesage and what need to be done?
Regards,
Deeban

This is the LIVE system working properly, but i saw this error message in the logs and when i searched lot of sites for the ORA-16531,i got the reply as "COntact Oracle".Please log a SR.
Thanks,
Hussein

RMAN: Unable to register database

Hi all,
I have just renamed the db_name, dbid and SID of a database using the DBNEWID Utility.
When I satrt up the database, it seems to start without any errors.
I need to take a backup of this database using RMAN.
But when I try to register the database, I get an error -
RMAN> register database;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of register command at 06/22/2009 15:26:39
RMAN-03014: implicit resync of recovery catalog failed
RMAN-03009: failure of full resync command on default channel at 06/22/2009 15:26:39
ORA-01587: error during control file backup file copy
ORA-27091: unable to queue I/O
ORA-27072: File I/O error
Linux Error: 2: No such file or directory
Additional information: 4
Additional information: 323
Additional information: 1036288
Could anyone please help me resolve this problem?

How do I find out, what path exact path is it trying to access?
When I do a SHOW ALL, all that RMAN does is show the error again.
This is what I get -
RMAN> SHOW ALL;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of show command at 06/23/2009 08:16:28
RMAN-03014: implicit resync of recovery catalog failed
RMAN-03009: failure of full resync command on default channel at 06/23/2009 08:16:28
ORA-01587: error during control file backup file copy
ORA-27091: unable to queue I/O
ORA-27072: File I/O error
Linux Error: 2: No such file or directory
Additional information: 4
Additional information: 323
Additional information: 602112
Edited by: user10882764 on Jun 23, 2009 5:21 AM
Edited by: user10882764 on Jun 23, 2009 5:22 AM

Not able to get data of primary in standby database (configured dataguard)

Hi all, I configured dataguard in my local system, i ve a few qsns (as i am new, ve patience)
1) scn differs wrt primary in standby (i checked, 1day difference), how to make scn same?
2)i created a table in primary, its not refelecting in standby, (below i ve pasted alertlog entries)
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 2 - see DBWR trace file
ORA-01110: data file 2: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\SYSAUX01.DBF'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 3 - see DBWR trace file
ORA-01110: data file 3: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\UNDOTBS01.DBF'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 4 - see DBWR trace file
ORA-01110: data file 4: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\USERS01.DBF'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 5 - see DBWR trace file
ORA-01110: data file 5: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\EXAMPLE01.DBF'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 6 - see DBWR trace file
ORA-01110: data file 6: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\STREAM_TBS.DBF'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 7 - see DBWR trace file
ORA-01110: data file 7: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\DATA01.DBF'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-16004 signalled during: alter database open read only...
3)wen i try to open standby database in read only mode gives below error..how do i solve it?
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1:
'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\SYSTEM01.DBF'

971424 wrote:
Hi all, I configured dataguard in my local system, i ve a few qsns (as i am new, ve patience)
1) scn differs wrt primary in standby (i checked, 1day difference), how to make scn same?Please do not use IM language here, instead of "qsns" use questions.
SCN can be differ in standby and it can be behind to primary based on the backup you have restored. Of course by performing recovery you can synchronize standby with primary database. You can use incremental backups for standby using link http://www.oracle-ckpt.com/rman-incremental-backups-to-roll-forward-a-physical-standby-database-2/
2)i created a table in primary, its not refelecting in standby, (below i ve pasted alertlog entries)
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 2 - see DBWR trace file
ORA-01110: data file 2: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\SYSAUX01.DBF'
ORA-27041: unable to open fileFirst check whether those files are exist in that location or not and if file names are different other than primary then rename file locations. Also check the permissions on the folder/files.

Ok, when i try to sync my new ipod touch to my computer, it says unable to connect for unknown reasons, and as a benefit, it shows the songs as faded in the list and therefore unplayable. how do i fix this problem?

as stated in the title, i when i try to sync my new ipod touch to my computer it says its unable to connect due to unkown reasons. the music is listed on my touch as there, but faded (minus a selected few songs) and therefore are unplayable. i have no idea where to start, i figured downloading the newest itunes update, however, it no longer shows up when i start it up. confused.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reboot the computer
- Try another cable and USB port
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Logical dataguard problem

Hi all,
I have prepared a logical dataguard on two local systems. My oracle version is 9i and linux version is Entreprise Linux 3.0.
Today when i tried to execute spcreate.sql on the primary database it had thrown some errors in my secondary database.
Kindly look at the following output from my secondary database:-
SQL> select applied_scn,newest_scn from dba_logstdby_progress;
APPLIED_SCN NEWEST_SCN
270084 272644
SQL> SELECT XIDUSN, XIDSLT, XIDSQN FROM DBA_LOGSTDBY_EVENTS
2 WHERE EVENT_TIME = (SELECT MAX(EVENT_TIME) FROM DBA_LOGSTDBY_EVENTS);
XIDUSN XIDSLT XIDSQN
6 1 114
SQL> EXECUTE DBMS_LOGSTDBY.SKIP_TRANSACTION(6,1,114);
PL/SQL procedure successfully completed.
SQL> ALTER DATABASE START LOGICAL STANDBY APPLY;
Database altered.
SQL> select applied_scn,newest_scn from dba_logstdby_progress;
APPLIED_SCN NEWEST_SCN
270087 272644
SQL> SELECT * FROM DBA_LOGSTDBY_EVENTS;
EVENT_TIM CURRENT_SCN COMMIT_SCN XIDUSN XIDSLT XIDSQN
EVENT
STATUS_CODE
STATUS
grant select on STATS$V_$SQLXS to PERFSTAT
942
ORA-00942: table or view does not exist
from the above errors i have found out that a particular transaction is unable to replicate in my standby database and i skipped the transaction. But still after skipping the transaction applied_scn in the dba_logstdby_progress is moving only by 3 each time I skip a transaction . So it won'' t be possible for me to skip each and every transaction.
Kindly let me another way of skipping the rest of transactions which are causing halt in the replication.
Also I am unable to find out how the script executed from the sys user can be replicated on logical database as sys comes in unsupported users in logical datagurad.
Is there any way I can execute a script on primary database which won't reflect on secondary database.
thanks in advance.

Hi Yoann,
Commands you provided for skipping perfstat schema worked on logical database .
Now i m executing spcreate.sql on secondary database it gives following errors after i have specified the perfstat password,default tablespace for perfstat as 'perfstat' and temporary tablespace for perfstat as 'temp' and datafile contained in perfstat tablespace is 150 MB in size.
spcreate worked fine on primary but is giving errors in the end in secondary.Any suggestions about this:-
Specifying the SYSTEM tablespace will result in the installation
FAILING, as using SYSTEM for performance data is not supported.
TABLESPACE_NAME CONTENTS
LOGMNRTS PERMANENT
PERFSTAT PERMANENT
TEMP TEMPORARY
UNDOTBS1 UNDO
Specify PERFSTAT user's default tablespace
Enter value for default_tablespace: perfstat
Using perfstat for the default tablespace
PL/SQL procedure successfully completed.
User altered.
User altered.
Choose the PERFSTAT user's temporary tablespace.
Specifying the SYSTEM tablespace will result in the installation
FAILING, as using SYSTEM for the temporary tablespace is not recommended.
Specify PERFSTAT user's temporary tablespace.
Enter value for temporary_tablespace: temp
Using temp for the temporary tablespace
PL/SQL procedure successfully completed.
User altered.
NOTE:
SPCUSR complete. Please check spcusr.lis for any errors.
SQL>
SQL> --
SQL> -- Build the tables and synonyms
SQL> connect perfstat/&&perfstat_password
Connected.
SQL> @@spctab
SQL> Rem
SQL> Rem $Header: spctab.sql 16-apr-2002.14:54:46 vbarrier Exp $
SQL> Rem
SQL> Rem spctab.sql
SQL> Rem
SQL> Rem Copyright (c) 1999, 2002, Oracle Corporation. All rights reserved.
SQL> Rem
SQL> Rem NAME
SQL> Rem spctab.sql
SQL> Rem
SQL> Rem DESCRIPTION
SQL> Rem SQL*PLUS command file to create tables to hold
SQL> Rem start and end "snapshot" statistical information
SQL> Rem
SQL> Rem NOTES
SQL> Rem Should be run as STATSPACK user, PERFSTAT
SQL> Rem
SQL> Rem MODIFIED (MM/DD/YY)
SQL> Rem vbarrier 03/20/02 - 2143634
SQL> Rem vbarrier 03/05/02 - Segment Statistics
SQL> Rem cdialeri 02/07/02 - 2218573
SQL> Rem cdialeri 01/30/02 - 2184717
SQL> Rem cdialeri 01/11/02 - 9.2 - features 2
SQL> Rem cdialeri 11/30/01 - 9.2 - features 1
SQL> Rem cdialeri 04/22/01 - Undostat changes
SQL> Rem cdialeri 03/02/01 - 9.0
SQL> Rem cdialeri 09/12/00 - sp_1404195
SQL> Rem cdialeri 04/07/00 - 1261813
SQL> Rem cdialeri 03/20/00 - Support for purge
SQL> Rem cdialeri 02/16/00 - 1191805
SQL> Rem cdialeri 01/26/00 - 1169401
SQL> Rem cdialeri 11/01/99 - Enhance, 1059172
SQL> Rem cmlim 07/17/97 - Added STATS$SQLAREA to store top sql stmts
SQL> Rem gwood 10/16/95 - Version to run as sys without using many view s
SQL> Rem cellis.uk 11/15/89 - Created
SQL> Rem
SQL>
SQL> set showmode off echo off;
If this script is automatically called from spcreate (which is
the supported method), all STATSPACK segments will be created in
the PERFSTAT user's default tablespace.
Using perfstat tablespace to store Statspack objects
... Creating STATS$SNAPSHOT_ID Sequence
create sequence STATS$SNAPSHOT_ID
ERROR at line 1:
ORA-01031: insufficient privileges
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production

Unable to see files in iTunes File Sharing

I'm using the latest version of iTunes, and have both an iPad and iPad2, both fully upto date with the latest version of IOS. Everything I now write about applies to both iPads.
Basically, I'm unable to see files that are sent to iTunes from the iPad. The ipad is connected to the PC, I select the file I want to send from the appropriate app, and then "send to iTunes". The file never appears under the app that sent if from the file sharing section of the device in iTunes. Even forcing another sync doesn't help either.
Here's the strange thing, if I unplug the iPad, then reconnect it, go back to file sharing page in iTunes, and click on the appropriate app, the files show. However, if I click onto another app in the file sharing list and back to the original one, the files have disappeared.
By way of example:
I connect my iPad to iTunes, after it automatically syncs, I select the iPad, choose the apps menu and scroll down to the file sharing window.
On my iPad, I open Pages, select a document and send it to iTunes.
Back on my PC, the file doesn't show under the Pages app in the file sharing window.
I resync the iPad, still no change.
I disconnect the iPad, reconnect and let it automatically sync again.
I navigate back to the file sharing section and click on the Pages app. Low and behold, the file is now showing.
I click onto any other app that is listed in the file sharing section, then click back to the Pages app. The file no longer shows.
It will remain like that until I unplug the ipad, and connect/sync again.
Exactly the same thing will happen regardless of which app I choose that supports file sending to iTunes.
Finally, just to confuse matters further, the reverse is also true. Adding a file to the file sharing section doesn't appear in the list, and the iPad can't see it - until I unplug and reconnect again. After that, same issues happen as already described.
Any assistance would be appreciated.

This is a bug in the Windows version of iTunes which I reported to Apple nearly a year ago (back when iTunes 10 came out), but they refuse to fix. I see the problem with my iPhone 3GS and iPad 2.
Basically file sharing stops working if you click on more than two or three apps in the file sharing list. The work around is to disconnect the iOS device and reconnect it. Then make sure to click only the app you want to transfer to/from. If the document list goes blank, disconnect and reconnect again.
It's really annoying and I wish Apple would fix it. Supposedly it was also broken for the Mac version of iTunes and was quickly fixed there, but not for Windows.

Unable to resync dataguard

Similar Messages

Maybe you are looking for