Datasource 0CO_PC_PCP_03 not returning Aux Costcomp str Data

Hi
We are using datasource 0CO_PC_PCP_03 to exctract itemised product costing details to BW. We observe datasource is not transfering rows with the cost component structure of data of the auxiliary costcomponent split.Can we apply note 423270 to fix this issue ( As this note is addressing the same issue, but not for above datasource)
Your reply will be highly appreciable
Thanks & Regards

Hello,
Have you tried running the datasource in your source system using RSA3 yet? I would run it in debug mode to see why it is not picking up the records you think it should.
Cheers! Bill

Similar Messages

DataSource is not able to extract the data

I am trying to extract data from R3. but 2LIS_03_BF DataSource is not able to extract the data, even though Goods is Issued in R/3 and is able to view the issued goods in MB5B report.
Please provide some ideas , on how to resolve this issue.

2LIS_03_BF datasource is the Inventory datasource.1st of all you have to check it in the Delta queue(RSA7) if the Delta is available or not..After that you have check the data in RSA3 transaction.soetimes it happens that the delta data is not showing into the RSA3 transaction.Try to load the data delta load into the BW system.

Read Historical Trend VIs do not return all of the data between start and stop.

My Main.vi manually writes data to Memory tags in DSC. If my Main is running, calls to Read Historical Trend.vi and Read Historical Trends.vi sometimes take a very long time (~60 seconds in some cases). In addition, most of the time the last data point from that time period is missing.
For example, I have a discrete tag that is False before the start time, and goes True and then False again before the stop time. I know that this happens because I can see it in the Tag Monitor. However, when I call Read Historical Trend.vi, only 2 data are returned: a 0 with a timestamp from before the start time, and a 1 with a timestamp just after the start time. There is no 0 with a timestamp befor
e the stop time, but there should be. If I wait for several and then try again, sometimes the data will be correct. But if I stop Main.vi and try again with the same exact timestamps, the data are returned immediately and nothing is missing.
I also occasionally get Error -1967390704 occurred at CIT_ReadStringTrace.vi. I'm not sure what causes that, because it doesn't happen every time.
I am using Labview 6.0.2, DSC 6.0.2 with the fixes, and the latest Logos (4.4).

Jake,
We have identified the issue and developed a potential workaround. Please create an email (not discussion forum) request so we can contact you on this.
Regards,
Michael Shasteen
Applications Engineering
National Instruments
www.ni.com/ask
1-866-ASK-MY-NI

Table exist in a datasource or not...

Hi Gurus,
I`d like to ask what the best solution is for getting know whether a table (or view) is extracted by a datasource or not?
Thanks

Hi ,
1.All data source extractors basically work on tables only .However some extractors are based on table or view directly.
2.To check this you can go to R/3 TCODE RSA2 and here can give datasource name .
3.In Extraction tab you will find Extraction Method .
V is for transperent table or DB view .
Here you will find the details about all extractors extraction method.
Hope this will be helpful.
Regards,
Jaya Tiwari

Function Module - E_T_DATA does not return data

Hi
I am trying to create a fuction module Generic extraction, the code belwo dosen't return any data.
when i debug YBW_MAT_STAT does have but after E_T_DATA = YBW_MAT_STAT it dose not return any data
can you help?
Ramesh
FUNCTION YBW_FM_ACTIVE_MATERIAL.
""Local Interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*"     VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*"     VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*"     VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*"      I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*"      E_T_DATA STRUCTURE YBW_MAT_STAT OPTIONAL
*" EXCEPTIONS
*"      NO_MORE_DATA
*"      ERROR_PASSED_TO_MESS_HANDLER
Example: DataSource for table SFLIGHT
TABLES: YBW_MAT_STAT.
Auxiliary Selection criteria structure
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
   DATA : YBW_MAT_STAT type YBW_MAT_STAT occurs 0 with header line.
Maximum number of lines for DB table
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
counter
          S_COUNTER_DATAPAKID LIKE SY-TABIX,
cursor
          S_CURSOR TYPE CURSOR.
Select ranges
Comment copy code
RANGES: L_R_CARRID FOR SFLIGHT-CARRID,
         L_R_CONNID FOR SFLIGHT-CONNID.
DATA: begin of t_marc occurs 0,
ZMATNR type MATNR,
ZWERKS type WERKS,
end of t_marc.
DATA: begin of t_ytmd_mat_ref occurs 0,
ZMATNR type MATNR,
ZYNA_MATNR_ST type YNA_MATNR_ST,
ZYEAME_MATNR_ST type YEAME_MATNR_ST,
ZYFIN_MATNR_ST type YFIN_MATNR_ST,
end of t_ytmd_mat_ref.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
Initialization: check input parameters
                buffer input parameters
                prepare data selection
Check DataSource validity
    CASE I_DSOURCE.
      WHEN 'ZAINV_MAT_STATUS'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE E009(R3). ENDIF.
this is a typical log call. Please write every error message like this
        LOG_WRITE 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  I_DSOURCE   "message variable 1
                  ' '.                 "message variable 2
        RAISE ERROR_PASSED_TO_MESS_HANDLER.
    ENDCASE.
    APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
Fill parameter buffer for data extraction calls
    S_S_IF-REQUNR    = I_REQUNR.
    S_S_IF-DSOURCE = I_DSOURCE.
    S_S_IF-MAXSIZE   = I_MAXSIZE.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
    APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE.                 "Initialization mode or data extraction ?
Data transfer: First Call      OPEN CURSOR + FETCH
               Following Calls FETCH only
First data package -> OPEN CURSOR
    IF S_COUNTER_DATAPAKID = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
      SELECT MATNR WERKS FROM MARC into table t_marc where MATNR BETWEEN '4233940M1' and '4233950M1'.
      loop at t_marc.
        SELECT MATNR YNA_MATNR_ST YEAME_MATNR_ST FROM YTMD_MAT_REF into table t_ytmd_mat_ref where MATNR = t_marc-zmatnr.
          loop at t_ytmd_mat_ref.
            if t_marc-zwerks = 'GB71' AND t_ytmd_mat_ref-ZYEAME_MATNR_ST = 'A'.
              read table t_ytmd_mat_ref with key zmatnr = t_marc-zmatnr.
              YBW_MAT_STAT-matnr = t_marc-zmatnr.
              YBW_MAT_STAT-plant = t_marc-zwerks.
            append YBW_MAT_STAT.
            clear YBW_MAT_STAT.
            endif.
           endloop.
      endloop.
    ENDIF.                             "First data package ?
     clear E_T_DATA.
     refresh E_T_DATA.
     E_T_DATA = YBW_MAT_STAT.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.              "Initialization mode or data extraction ?
ENDFUNCTION.

Hi
I have a question,
With the above code i have all my records (450000+) in a single data package.
how do i break this in multiple data packages
regards
Ramesh

0EC_PCA_3 does not return data in RSA3 if the target system is entered

Hello all,
Datasource 0EC_PCA_3 is not transferring data to the BW 7.0 system. In the ECC 6.0 system datasource 0EC_PCA_3 does not return data in RSA3 if the target system (BWDCLNT100) is entered in the selection fields. When omitting the target system all expected data is returned.
Datasource 0EC_PCA_1 works fine for the same target system.
There is one thread dealing with the same problem but the person does not provide the solution he found.
Does anyone know what the issue is?
Regards and thanks,
József.

The problem was solved by removing the datasource in both BW and R/3 and activating everything from scratch again. We didn't find out what was the cause of the problem, but at least it is working now.

Payroll extractor 0HR_PY_1 do not return any data in RSA3 in full mode

Hi,
I have activated Payroll extractor 0HR_PY_1.
I use RSA3 to check the extractor.
It does not return any data(0 records) in full mode.
Do i need to do activate any other object, apart from the datasource?
Thanks in advance for your help.
Regards,
Suresh.

Hi Suresh,
HR extractors need additional authorizations. When the extractor is run, there would be a check if the user is authorized to extract data. Check SAP notes 672514 & 397208. Also find my previous post on this.
Re: Extractor 0HR_PY_1 does not return data to BW
Best Regards,
Murali.

BC4J - ViewObject not returning latest data

BC4J - ViewObject not returning latest data. Some kind of EO/VO Cache Latency Issue.
I have an edit page that presents a drop-down list which is suppose to display * un-assigned * messages, but does not. The drop-down list is using an <jbo:InputSelect> tag that gets values from a ViewObject (UnAssignedMessageView ) which issues the query listed below. Note, the ViewObject is not based on an Entity Object.
(Query in UnAssignedMessageView)
select      message.message_desc_short, message.message_id
from     fmm.message
where      message.message_id not in (select cardmessage.message_id from fmm.card_message)
and message.message_id != 0
(from the edit.jsp)
<jbo:ApplicationModule id="am" configname="com.maxmcbyte.fmm.model.ModelModule.ModelModuleLocal" releasemode="Reserved" />
<jbo:DataSource id="ds" appid="am" viewobject="CardMessageView1" />           <<****** The VO where the inserts/updates are recorded.
<jbo:DataSource id="ds2" appid="am" viewobject="MessageUnAssignedView" />     <<****** The VO for the unassigned message drop-down-list.
The problem is at step 3.
Starting with 3 Unassigned Messages.
Step 1: enter new record AND select a MESSAGE_ID from the drop-down list.
Step 2: commit the transaction.
Step 3: enter another record AND select a MESSAGE_ID from the drop-down list.     <<****** the list should now be displaying 2 unassigned messages but is displaying 3.
Note, if I check the database after step 3 using the same query as in the UnAssignedMessageView I get the correct result. I guess I'm not understanding how BC4J ViewObject Caching is working. It is strange that even after I commit the record that the cache is not updated.
I have read the docs and will have to re-read them again * but * it would be REAL NICE to see an illustration of "A DAY IN THE LIFETIME OF DATA IN BC4J" for dummies like me.
Can anyone tell me what I'm missing here AND what specifically needs to be done?
Thanks All,
Bill G...

Well, I figured it out * BUT * this is the sort of thing that I'll bet stumps a lot of new users * AND * should be posted to a "Gotch-Ya" list.
I'd still like to see an illustration of "A DAY IN THE LIFE OF DATA IN BC4J"
Bill G...
<jbo:ApplicationModule id="am" configname="com.maxmcbyte.fmm.model.ModelModule.ModelModuleLocal" releasemode="Reserved" />
<jbo:DataSource id="ds1" appid="am" viewobject="CardMessageView1" />
<jbo:DataSource id="ds2" appid="am" viewobject="MessageUnAssignedView" />
<%-- adding this did the trick --%>
<%
ViewObject view2 = ds2.getRowSet().getViewObject();
view2.executeQuery();
view2.first();
%>

Read from sql task and send to data flow task - [OLE DB Source [1]] Error: A rowset based on the SQL command was not returned by the OLE DB provider.

I have created a execut sql task -
In that, i have a created a 'empidvar' variable of string type and put sqlstatement = 'select distinct empid from emp'
Resultset=resultname=0 and variablename=empidvar
I have added data flow task of ole db type and I put this sql statement under sql command - exec emp_sp @empidvar=?
I am getting an error.
[OLE DB Source [1]] Error: A rowset based on the SQL command was not returned by the OLE DB provider.
[SSIS.Pipeline] Error: component "OLE DB Source" (1) failed the pre-execute phase and returned error code 0xC02092B4.

shouldnt setting be Result
Set=Full Resultset as your query returns a resultset? also i think variable to be mapped should be of object type.
Then for data flow task also you need to put it inside a ForEachLoop based on ADO.NET recordset and map your earlier variable inside it so as to iterate for every value the sql task returns.
Also if using SP in oledb source make sure you read this
http://consultingblogs.emc.com/jamiethomson/archive/2006/12/20/SSIS_3A00_-Using-stored-procedures-inside-an-OLE-DB-Source-component.aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Very Very Urgent Issue: Restricted Key Figure does not return any data

Hi all,
Please help me solving this urgent issue.
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Also in RSRT the SQl generated when these are included in RKF is not
correct.
I debugged and know they are getting populated. As when included in RKF
I can also see the values of customer exit variables from information
tab.
I also know that there is data in cube for those restrictions.
I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
Thanks
SAP BW
**Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any data

Hi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW

Binocular search for Cost Center is not returning any data

Hi Gurus,
When clicking on the SRM-Shooping Cart-Cost Assignment- Account Assignment Overview- Cost center Binocular search icon, it is not returning any data. However, when drilling down in the Account Assignment Overview, you will see another Binocular search icon for Cost Center which is working fine.
Any idea of how you troubleshoot it.
Thanks in advace for your help.
HA

Not sure about the cost assignment drill down, but after we applied SP13 to SRM server 550 the binoculars for cost center stopped working. the following note corrected this.
Note 1259735 - Search help of generic account does not work
If it has never worked, then probably need to setup a RFC dialog user for the F4 search help, Multiple threads on here around the dialog user for F4 with details on configuration and use.
JF

Column not returning any data

Hello,
For some reason, the result set returned from the following query will not return one of the columns, and I am stumped. Any help would be appreciated. The column that is returning NULL, even though all the other columns return data is CHQ.CHECK_NO (Note: CHQ.CHECK_DATE is returning data just fine). CHQ.CHECK_NO is defined as Number 15,0
SELECT INV.INVOICE_DATE, INV.VENDORNO, INV.INVOICE_NO, INV.INVOICE_AMOUNT, INV.DUE_DATE, CHQ.CHECK_NO, CHQ.CHECK_DATE, SPAY.COUNT1
FROM APINVOICE INV, CHEQUE_DETAIL CHQDTL, CHEQUE CHQ,
(SELECT VENDORNO, INVOICE_NO, COUNT(*) AS COUNT1
FROM VISPAYMAS
WHERE COMP_CODE_ACCT = 'M'
GROUP BY VENDORNO, INVOICE_NO) SPAY
WHERE INV.ID = CHQDTL.APINVOICE_ID (+) AND CHQDTL.CHEQUE_ID = CHQ.ID (+) AND INV.VENDORNO = SPAY.VENDORNO (+) AND
INV.INVOICE_NO = SPAY.INVOICE_NO (+) AND (INV.VENDORNO = 'AV603') AND (INV.INVOICE_DATE <= '25-JUL-06') AND
(INV.INVOICE_DATE >= '25-JUL-05')
ORDER BY INV.INVOICE_DATE DESC

After further checking, it appears that indeed all the CHECK_NO data is actually NULL for the result set I am querying. The fact that the CHECK_DATE was returning data lead me to believe that there would have to be a corresponding CHECK_NO.... guess NOT! :) Ugh, I just happened to get stuck with a really odd test result set. Thanks for the help! On trying a different VENDOR_NO in the query, it is returning CHECK_NO data. I'll have to inquire as to why there would be CHECK_DATE data and not a CHECK_NO... hmm.
I did add the TO_DATE() function into my query, thanks for the tip.

Ibots not returning any data

Hi,
I have some ibots that I scheduled to run on a daily basis and which were working perfectly.
Suddenly the same ibots, they run but the content of the attachment says "The specified criteria did not return any data".
I checked the log files and could not see any relavant error.
If I go back in the report that I am sending through the ibot, it runs without any problem.
I tried to send it in different formats and run as different users, but the results are still the same!
Any idea what else I could check?
Type: Warning
Severity: 50
Time: Wed May 15 14:10:19 2013
File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 199
Properties: RptPath-/shared/MICROS/giuliano/cube_build_verification;SID-btilnnapkfo2omg91a71b9m6n2;bindID-1;connID-31;ThreadID-4640;statementID-364;RSP-o:go~r:report
Location:
     saw.odbc.statement.fetch
     saw.subsystem.portal.pdf
     saw.delivers.rpc.getDeviceContent
     saw.rpc.server.responder
     saw.rpc.server
     saw.rpc.server.handleConnection
     saw.rpc.server.dispatch
     saw.threadPool
     saw.threads
SQLFetchScroll returned code SQL_NO_DATA_FOUND

Thanks it solved the issue.
But One more thing Now I have placed the parameters in the where clause of the query
Query-
select field1,field2,field3,field4,field5,job_name,candidate_name,interview_date from etc.ethr_irc_int_details
where field1 is not null
and job_name = :1
and candidate_name = :2
and interview_date = :3
in the VO I am executing
public void iniQuery(String S1, String S2,String S3)
System.out.println("insdie ini query of the VO");
System.out.println("S1 "+S1);
System.out.println("S2 "+S2);
System.out.println("S3 "+S3);
this.setWhereClauseParams(null);
this.setWhereClauseParam(0,S1);
this.setWhereClauseParam(1,S2);
this.setWhereClauseParam(2,S2);
executeQuery();
and in AM
ETHRIntDetailsVOImpl IDVO = (ETHRIntDetailsVOImpl)this.getETHRIntDetailsVO();
// IDVO.executeQuery();
// OAViewObject IDVO = (OAViewObject)findViewObject("ETHRIntDetailsVO");
IDVO.iniQuery(S1,S2,S3);
Row row = IDVO.first();
again I am not getting any data in the row??
Any idea if I am doing any thing wrong..
Please help urgently.
Thanks
Ashish

Custom reports in R12 not returning any data

I'm seeing an issue of custom reports in R12 not returning any data. So far what I've been able to dig into is that the report query itself is referring to APPS synonyms that are secured under MOAC. What I am able to do is run the query in SQL Developer after having run mo_global.set_policy_context and I receive the data I'm looking for. This is not the case when running the report through the concurrent programs request.
Secondly, I've also configured the concurrent program request to run as single operating unit mode. This aided in fixing any issues with LOVs on the parameter form. However, still no results from the report itself. I've also searched around quite extensively and added a P_CONC_PROGRAM_ID user parameter in reports developer, as well as adding SRW.USER_EXIT('FND SRWINIT') to the before report trigger and SRW.USER_EXIT('FND SRWEXIT') to the after report trigger as well. No luck. I've also tried running mo_global.set_policy_context on the before report trigger and no such luck.
Has anyone seen similar issues with this and could shed some light? At this point, the workaround I would see is to just change the query to use respective all tables and match up against the orgid, but I'd rather not do that.

I am facing exactly the same issue with 2 of my custom Reports in R12.1.3. We did our level best to find out the issue. It was always a hit and trial fix.
But the following were our observations and workarounds
0) The reports Conc Prog were in MOAC - Single mode. Both the reports had SRW INIT, EXIT and P_CONC_REQUEST_ID
1) The reports which caused the issues[NO data fetched for MOAC] had multiple Queries in the data model and one Query fetches data and the 2nd one doesnt. Both the queries when run from SQL developer after setting the org gave results.
Workaround for Report1
a) We deleted the data link connecting the 2 columns in both the queries and added a bind variable instead in the 2nd /child query to refer to the column in the parent query and linked the 2 groups.
Workaround for Report 2
a) In report 2 the queries were not linked to each other. Only one query used to return results and the 2nd one returned 0 rows. The workaround was to use the "where" conditions as lexical parameters after having set the value for the same in before report trigger.
Both the work around looks illogical. Still It worked..!
Thanks
Biju Radhakrishnan

Fetching Form Data... does not return form's field list to edit

I have a Portal Form based on a view. It works fine if I run it.
Suddenly I am unable to edit the form field properties:
1) In the application list, I do not get run option for the form.
2) If I go to manage and edit, "Fetching Form Data..." does not return the list of fields, so I am unable to change field properties.
3) I can still run the form.
Please help, I need to fix this within hours.
Thanks in advance.

I think I know what causes the error. Whenever I use HTML tags inside the Display Options/label text box I get this error.
I have tried <p align="right">xyz</p> and <h4 align="right">xyz</h4>. In both cases I can run the form the first time and the label appears right justified, but when you try to edit the form, bottom left shows "error on page" and field data does not show up.
To fix this I had to go to the version before I added the HTML tags to the label.
Thank you for your help.

Datasource 0CO_PC_PCP_03 not returning Aux Costcomp str Data

Similar Messages

Maybe you are looking for