DataSource for 0SD_C02 doesn't exist in Source System

Hi Friends,
I think the title explain all the problem.
I want to load the 0SD_C02 infocube and I know that I have to do it with the infosource 2LIS_01_S005, but when I go to R/3 to search for it, the system tells me that it doesn't exist.
I've proved with the Tcode RSA3 to verify the extractor and it gives me the same answer "Infosource 2LIS_01_S005 doesn't exist in Source System".
Does anybody know how to load this infocube?
Thanks in advance.
Francis.
Following with the same problem.
I want to load data on 0SD_C02, 0SD_C03 & 0SD_C05. C03 & C05 has datasources named like 2LIS_11/2/3... I have these ones in R/3, but the datasources named like 2LIS_01_* aren't exist in R/3,
How can I load data in these infocubes?
Thanks in advance,
Francis.
Message was edited by:
        Francis Estevez

I think you have to install it via RSA5 transaction in your source system...
Hope it helps!
Bye,
Roberto

Similar Messages

  • DataSource 2LIS_11_VAHDR does not exist in source system ECDCLNT100 of vers

    Hi iam working on BI 7 and ECC 6 system. When i try to install the transfer rules for 2 lis_11_vahdr in BI7 business content, it gave a message that "<b>DataSource 2LIS_11_VAHDR does not exist in source system ECDCLNT100 of version A".</b> i have done an enhancement for this.I activated them from rsa5,  activated both in LBWE as well as activated thier structures too after enhancing. I replicated and did all possible steps still iam unable to find.
    Can anybody help me who has faced similar issue.
    Regards,
    Neil

    Hi Niel,
           Could you chek the RFC Connection of particular client.
    Thanks,
    Ram

  • DataSource 80SD_O03 does not exist in source system of version A

    Hi,
              While Activating the Standard DSOs i'm getting this "DataSource 80SD_O03 does not exist in source system of version A".
    Regards,
    Devi.

    Hi,
    Hope you followed the same in R/3
    Datasource:        Rsa5->RSA6
    BI Side:
    Rsa1->BI Content->Select Datasource->Installation->Replicating/Activating the DS
    And same procedure for Infoprovider too.
    Please analyze closely about the procedure, some where you are missing something.
    Regards,
    Suman

  • DataSource ***** does not exist in source system ***** of version A

    dear masters,
    i m new to BI i m creating one report in BI. for that i m taking the data from Excel file. for that i have created the source system
    and data source i saved and activated the data source. in data source preview i checked the data its coming properly as i given in
    excel sheet. after that i m creating the infopackage while creating it i m getting the error DataSource ***** does not exist in source system ***** of version A. i checked data source in RSA2 but in this it is showing The DataSource DS_PO85 does not exist in version A also i checked in RSA3 its showing The DataSource DS_PO85 does not exist in version A.
    pls help me how to overcome this problem.... where i m missing which setttings...
    regards,
    vicky

    Hi Vicky,
    Go to RSA1--> Data Source --> Find the data source (for which the load is getting failed)
    Now Change and activate the data source again.
    Both the status and version should be activated green.
    Also you can use the check button to check the DS.
    Thanks,
    Naween

  • Adding an element with an attribute to destination schema that doesn't exist on source schema

    I have source schema which looks something like below:
    source schema
     name                    //attribute
     address1                //attribute
     address2                //attribute
     city                       //attribute
    I need to map it to a destination schema which looks like below:
    destination schema
    employee                  //record (repeating element)
      fieldname                //attribute
      type                       //attribute
    After mapping, the xml would look like below: 
    <employee fieldname= 'name' type='string'>
    <employee fieldname= 'address1' type ='string'>
    <employee fieldname= 'address2' type ='string'>
    <employee fieldname= 'city' type ='string'>
    (fieldname exists in source schema, but 'type'  doesn't. basing on the fieldname, I add it on the destination schema using ValueMapping functoid )And I am able to do it successfully, but my question is, I need to add a field called 'salary'
    of type 'double' to the destination schema similar to the other values
    <employee fieldname= 'salary' type ='double'>
    But salary doesn't exist in 'source' schema,  and it needs to be there in destination schema associated with the attribute 'type='dcouble''   How can I accomplish this? Appreciate any help. thanks!!

    Hi Anne,
    For your requirement, all you need is Table Looping functiod and Table Extractor functiod.
    In this example, I am not using the value mapping functiod (you can also use it, but I prefer to make this sample easier for you to understand) so using a “string” as constant.
    When you mean by you want
    <employee fieldname= 'name' type='string'>
    <employee fieldname= 'address1' type ='string'>
    <employee fieldname= 'address2' type ='string'> <employee fieldname= 'city' type ='string'>
    I assume you’re looking for something like this
    <employee fieldname= 'ValueOfName' type='string'>
    <employee fieldname= 'ValueOfAddress1' type ='string'>
    <employee fieldname= 'ValueOfAddress2' type ='string'>
    <employee fieldname= 'ValueOfCity' type ='string'>
    Or if you just need field names not the value of the fields, you can still do what you want with the way you do now but using Table Looping functiod and Table Extractor
    functiod.
    Let me explain this.
    Use Table Looping functiod with following parameters:
    5 = You need 5 records in output i.e. name, address1,address2,city and salary.
    2 = you need 2 columns. i.e. fieldname and type.
    Link from 'name' in source schema. Here I have just linked the 'name' from source schema, so this will have VALUE-of-Name element/attribute. Or if you can want just the
    field name, you can use the way you’re using to get the field name.
    Repeat the above step for all the rest of the fields. I have linked address1, address2 and city.
    7<sup>th</sup> parameter is “string” as constant, which I will be passing to “type” attribute in destination. Again you can use value mapping functiod as you
    do. If you use value mapping functiod, then rest of the parameter shall be value mapping functiod.
    Then I add last two paraters “salary” and “double” as constants, which I will be using to add the new record. Below image show the parameters for Table looping functiond:
    Now select the “Configure Table Looping grid” property and map as shown. Give a closer look to the way how this grid has been mapped. Last record in the grid shows the
    additional record which you want to add with “salary” and “double”
    Now add “Table Extractor functiod”, set its first parameter to “Table looping” and second parameter as “1”
    Now another “Table Extractor functiod”, set its first parameter to “Table looping” and second parameter as “2”. Below image show the Table Txtrator functiods parameters:
    Now link the Table Looping functiod to “employee” record in destination schema.
    Use the above you will get the output as you wanted. Following is the output, note: as mentioned in the fieldName attribute I have the value of the source fields/attributes
    since I have used the direct link from soruce in Table Looping functiod parameters, you can use the link which is producing the value for you now for fieldname:
    <employee fieldName="name_0" type="string"></employee>
    <employee fieldName="address1_1" type="string"></employee>
    <employee fieldName="address2_2" type="string"></employee>
    <employee fieldName="city_3" type="string"></employee>
    <employee fieldName="salary" type="double"></employee>
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Data source 80BP_ID does not exists in source system

    Hi All,
    I have just started with standard content for SD module.
    I activated my datasources 2lis_11_vaitm and 2lis_12_vcitm in my R3 system.
    After replicating these data sources in my BI system i went to BI Content to activate my Info sources.
    While installing info sources 2lis_11_vaitm and 2lis_12_vcitm i got  errors  namely
    Data source 80BP_ID does not exists in source system
    Datasource 80BP_REL not maintained.
    Can somebody pls suggest a way out.
    Thanks in advance..
    Regards,
    Rohit

    Hi Rohit,
    When ever you try to install the SD related Standard business content then it will automatically pick up the CRM related data. the 0BP_ID, these are related to the CRM.
    Please uncheck the unrelated objects while installing the STD content.
    you can select the option in the grouping as ONLY NECESSARY OBJECTS.
    Regards,
    Ravi Kanth

  • Transport Error - DS does not exist in Source system

    Dear All,
    I am getting below Error while transporting the DSO from DEV to Quality.
    DataSource  8ZM_ALT  does not exist in source system  DCQCLI041 of version A.
    I have checked the dataosource is active and available in Development system.  But Its giving error while importing.
    As per the dataflow the data of this DSO is updated to Cube.
    Has anyone solved this issue, because i have checked in SDN but there are no suitable answers.
    Regards
    Sankar

    Hi,
    Your right I am transporting ZM_ALT Dso .  The following log of the error we are getting.
    DataSource 8ZM_ALT does not exist in source system DCQCLI041 of version A
    Mapping between data source 8ZM_ALT and source system DCQCLI041 is inconsistent
    DataSource 8ZM_ALT does not exist in source system DCQCLI041 of version A
    Field /BIC/ZM_AA will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_APPL will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_BEM will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_MOD will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_NCDS will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_NDESC will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_NES1 will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_NES2 will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_NIN will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_NPCS will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Field /BIC/ZM_NPN will not be delivered from DataSource 8ZM_ALT in source system DCQCLI041
    Regards
    Sankar

  • DataSource 0HR_ATT is not defined in the source system

    Hi Gurus,
    When I am trying load data for HR Master data Attribute it is not loading any anything. I checked that datasource in Rsa3 at R/3 side there it is showing
    "DataSource 0HR_xx_attr is not defined in the source system", can anybody give me the solution.
    I will assign full points.
    Thanks in advance.

    Hi Sergio,
    I have replicated the datasource in BW. Still It is showing the same.
    Kindly advice.
    Maruthi

  • DataSource 2LIS_11_VAHDR is not defined in the source system

    I have a problem when I had activated the Data Source called 2LIS_11_VAHDR in ERP DEV and then put it in a request to be transfered to ERP Prod
    Then I am using RSA3 I receive the following error
    DataSource 2LIS_11_VAHDR is not defined in the source system
    I tried to activate this data source several times in ERP Dev and send it to production without any success

    I am sure you would have done these steps, but just a double-check.
    1. RSA5 - Install the data source
    2. RSA6 - Activate the data source
    Check in LBWE if the data source is available.
    All this will be captured in a transport request(s) - you may may have a Workbench request & a Customizing request.
    Also, before transporting, please check in your target system whether the datasource is available or not (RSA5).
    Further to the above, do a check in Dev for the following.
    After activating it in RSA6, fill the setup tables for 2LIS_11_VAHDR - i.e. thru' transaction OLI7BW.
    And check the data in RSA3.

  • DataSource 0HR_PA_PA_1 is not defined in the source system

    Hi All,
    DataSource 0HR_PA_PA_1 is not defined in the source system Error is coming when I am trying to activate the datasource in source system (In RSA5-Data source is not available in source system)in order to pull data to HeadCount InfoCube in SAP Hr module.
    Can anybody please help me in this regards.
    I searched in sdn but no luck.
    Thanks
    Mohan

    HI Mohan,
    0HR_PA_PA_1 is a datamart datasource , It will be available in the BI system and not in the HR system
    The extractor takes the data from the master data tables in the BW system. (check SAP note 336229 )
    Check the SAP help
    http://help.sap.com/saphelp_nw70/helpdata/en/29/02b43947f80c74e10000000a114084/frameset.htm
    Regards,
    Sathya

  • Customized delta data source for deleting data record in the source system.

    Hello Gurus,
           there is a customized delta data source,  how to implement delta function for deleting data record in the source system?
    I mean if there is record deleted in the source sytem, how to notify SAP BW system for this deleting change by this customized delta
    data source?
    Many thanks.

    Hi,
    when ever record deleted we need to write the code to insert the record in  Z table load this records into BW in a cube with similar structure.while loading into this cube multiply the Keyfigure by -1.
    add this cube in the Multi Provider.The union of the records in the orginal cube and the cube having deleted records will result in zero vale and will not be displayed in report .
    Regards,

  • ODS Activation Failure due to Number range object for char doesn't exist

    Hi
    I am having problem regarding ODS actvatn, My oDS is gttng fail due to number range for char object doesn't exist.
    error when checking sid for ODS.
    I have made all tests in RSRV for dat Infoobject
    can any one suggest me ...........
    points will be assigned
    kindly mail me 2      [email protected]

    Hi,
    chk tis blog.. hope it clears wat buffering is
    /people/vikash.agrawal/blog/2006/04/05/load-lots-of-data-147faster148-with-buffering-number-range
    What is buffering number range:
    “Buffer the Numbers ( which system picks up from database -in case of Master Data – SIDs & in case of Transaction Data Dimension Ids) and use these buffered numbers rather than hitting the database (for each new master data records or for each new combination of SIDs to create a new Dimension Ids). So the concept is –
    “SID Number Range can be Buffered Instead of Accessing the Database for Each SID”
    Hope its clear!

  • ECC6.0 upgrade and BW steps for mapping the new ECC6.0 source system

    Hello gurus
    We are upgrading from R3 4.6C to ECC6.0. We use BW 7.0 SP 18. We will create the new ECC6.0 source system in BW, replicate metadata and everything. The question is how do we copy or reassign the existing objects pointing to our current 4.6c dev system (transfer rules, transformations, infopackages, process chains) to point to the new ECC6.0 dev system ? As a note,  we also need to keep the current 4.6c source system objects until go-live o ECC6.0.
    What is the common practice in such a case ? I am sure we are not unique...
    A prompt response would be appreciated.
    Thank you all.

    So the plan is to copy dev R3 and upgrade that - then Q r3 copied and upgrade that - then upgrade directly prod R3?
    If so - then if it were me - I would firstly prove all this in a sandbox environment where BW dev points at an upgraded sandbox R3 ecc
    ie same logical system
    Then once that is proved I would organise downtime of BW development for a few months whilst the d-q-p ecc happens
    Then when they copy dev r43 to ecc r3 i would then just point BW dev at the new ecc box and go from there (ie clear the deltas - change the logical system name to the new ecc box - replicate meta data - transtru all the datasources - run the process chains nothign to worry about)
    However if you cant afford the down time - you may have to have an alternative transport route - ie copy dev BW to a another dev bw box and have an alternative path to production for issues
    Then once everything is upgraded redo the changes through d-q-p to get the transports back in line (thats what we did)

  • Datasource is not active in BI though source system has active DS

    Hi,
    I have three datasources which are active  in source system.
    i had replicated all these three datasources into BI system...
    But even after replication for all the three datasources M version is different from A version..
    I cannot activate manually all these datasource in production system as it is allowed only for display purposes..
    how can i make these datasources active?

    Hi Srini,
    The worrying point is i had never done that like before..
    I always transport datasource in R/3 side first and then replicate to BI systems and using directly..
    since the source systems assigned to it are different ( In BI Dev system R/3 source system and in BI production source system is ofcourse is R/3 production..)
    Is it Ok even if the dataasources had different source systems? when transporting from dev to prodution?

  • SLT Replication for the same table from Multiple Source Systems

    Hello,
    With HANA 1.0 SP03, it is now possible to connect multiple source systems to the same SLT Replication server and from there on to the same schema in SAP HANA - does this mean same table as well? Or will it be different tables?
    My doubt:
    Consider i am replicating the information from KNA1 from 2 Source Systems - say SourceA and SourceB.
    If I have different records in SourceA.KNA1 and SourceB.KNA1, i believe the records will be added during the replication and as a result, the final table has 2 different records.
    Now, if the same record appears in the KNA1 tables from both the sources, the final table should hold only 1 record.
    Also, if the same Customer's record is posted in both the systems with different values, it should add the records.
    How does HANA have a check in this situation?
    Please throw some light on this.

    Hi Vishal,
    i suggest you to take a look to SAP HANA SPS03 Master Guide. There is a comparison table for the three replication technologies available (see page 25).
    For Multi-System Support, there are these values:
    - Trigger-Based Replication (SLT Replication): Multiple source systems to multiple SAP  HANA instances (one  source system can be connected to one SAP HANA schema only)
    So i think that in your case you should consider BO Data Services (losing real-time analytics capabilities of course).
    Regards
    Leopoldo Capasso

Maybe you are looking for