Date field not working in Query definition

Hello Experts ,
I am trying to prepare one report which will pull some fields ( extended fields ) from Rfx header page and display in the report . For this I have made one query definition and written SQL query . Now all fields except the date fields are successfully fetched and displayed by the query . Only when I am adding the date field inside "result field" tab , the query is throwing error like -
" ORA-00904: "EFFECTIVE_START_DATE": invalid identifier "
but this field name is correct .
Any formatting needs for this field ?
Regards
Sudipta

Hi Sudipta,
Thanks for your reply.
Actually I have created a diferent extension field and want to add that field in Results fields of particular Query Definition. But when I use it Tablename.Extension_Field_Name, its giving below exception
ORA-00904: "t"."fieldname": invalid identifier
Any idea what needs to be taken care of while using extension fields in Queries.
Thanks,
Saloni

Similar Messages

Date field not working like a date field

We have quite a few date objects in the Universe but only some seem to function as a date field whereas some do not.
The easiest way to tell whether a date field is functioning as a date field seems to be to add the date fields as a filter in a query. If it is a proper date field a Calendar option appears. If it is not, no Calendar option appears.
In the screenshot below, the Latest Approved Date functions like a proper date object and shows a calendar option. The other field does not even though it is a date field too.
I'm checking with this forum as the Universe designer didn't have any answer for this.

HI Vivek,
Go to Universe Designer
click on object (Latest Approved Date)
click on definition
go to TYPE scroll down and select type as DATE
and export now check the filter it will work
try once
Regards,
Ranjeet

IDoc string field to JDBC date field - Not working

Hello everyone,
Once again I must ask you something that is keeping me..
I had a interface type RFC ASync to JDBC SQL Server, it was working fine. Then, I was asked to change to a type iDoc ASync to JDBC SQL Server.
At first, it was not a problem, just manual work. But them, I am getting an error.
In the RFC, I had a date field, that was directly related to the date field on the JDBC destination, so the mapping was pretty much straight forward. The SQL INSERT command was working fine on this cenario.
Now, in iDoc, this field was automatically converted to a string, and somehow, PI is not understanding that string has to be mapped to a date field in the JDBC.
Is there any 'workaround' for me to do this?
Thanks!
Ricardo Sancio Lóra
Brazil

The issue here is that somehow, the same SQL insert command that was working, does not work anymore.
This is the SQL command took from RWB log monitor:
INSERT INTO aniversariantes_sap (matricula, nome, nascimento, unidade) VALUES (00000070, 'Ricardo Lora', '19851216', 00000000)
If I run this query on my DB it works.
But, in PI, it's not, here is the error:
Could not execute statement for table/stored proc. "aniversariantes_sap" (structure "ANIVERSARIANTES_SAP") due to com.microsoft.sqlserver.jdbc.SQLServerException: Syntax error converting datetime from character string.
I´ve tried cast() and convert() using mapping 'habilities', but also, does not work. Work if I run in the DB, but not if PI runs it.
Wierd..
Ricardo

Help for date field not working after upgrade

hi experts,
In our BSP application for a page we had an inputfield (date).
Onvaluehelp for input field we were calling the saphelpdate function.
however after upgrade this functionality is not working properly as no pop up comes after clicking on the icon.
we have upgraded to SPS 16 recently.
please help me.
regards,
Arvind.

Hi, I try upper case but nothing happen. This is all my code by far, I hope you can help me:
DATA: BEGIN OF T_PCONT OCCURS 0,
      PCONT LIKE ZPSPERMISOS-PSOBKEY,
END OF T_PCONT.
DATA: BEGIN OF T_FIELDS OCCURS 0.
        INCLUDE STRUCTURE help_value.
DATA END OF T_FIELDS.
DATA: BEGIN OF T_VALUES OCCURS 0,
      VALUE(60) TYPE c.
DATA: END OF T_VALUES.
DATA: N TYPE i.
SELECTION-SCREEN BEGIN OF BLOCK b20 WITH FRAME TITLE text-b02.
SELECT-OPTIONS:
    P_CONT FOR ZPSPERMISOSH-PSOBKEY OBLIGATORY NO-EXTENSION NO INTERVALS,
    P_INT FOR ZPSPERMISOSH-PARTNER OBLIGATORY NO-EXTENSION NO INTERVALS,
    P_FEC FOR ZPSPERMISOSH-ZFINICN NO-EXTENSION NO INTERVALS,
    P_RAZ FOR ZPSPERMISOSH-ZRAZONFINIC NO-EXTENSION NO INTERVALS.
SELECTION-SCREEN END OF BLOCK b20.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_CONT-LOW.
PERFORM P_HELP_P_CONT USING P_CONT-LOW.
*&      Form P_HELP_P_CONT
FORM P_HELP_P_CONT USING P_P_CONT.
DESCRIBE TABLE T_PCONT LINES N.
IF N EQ 0.
    T_FIELDS-FIELDNAME = 'PSOBKEY'.
    T_FIELDS-TABNAME    = 'ZPSPERMISOS'.
    T_FIELDS-SELECTFLAG = 'X'.
    APPEND T_FIELDS.
    CLEAR T_FIELDS.
    SELECT PSOBKEY FROM ZPSPERMISOS
    INTO TABLE T_PCONT.
    SORT T_PCONT BY PCONT.
CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE'
    EXPORTING
      CUCOL        = 10
      CUROW        = 1
      TABNAME      = 'T_PCONT'
      FIELDNAME    = 'PCONT'
    IMPORTING
      SELECT_VALUE = P_P_CONT
    TABLES
      FIELDS       = T_FIELDS
      VALUETAB     = T_VALUES.
ENDFORM.                    " P_HELP_P_CONT
Edited by: J. Garibaldi on Nov 25, 2009 11:14 AM
Edited by: J. Garibaldi on Nov 25, 2009 11:16 AM

Select-a-date field not working on iPhone

I'm having trouble getting this form to work on a mobile device: www.centralparkpetretreat.com/contact-us
There are 2 select-a-date fields on this form (drop-off date and pick-up date). The first one works and the second one doesn't. It seems to only be a problem on an iPhone. Has anyone else encountered this problem? Any ideas?
Thanks!

HI Vivek,
Go to Universe Designer
click on object (Latest Approved Date)
click on definition
go to TYPE scroll down and select type as DATE
and export now check the filter it will work
try once
Regards,
Ranjeet

Dense_Rank() over order by date fields not working properly

Hi,
i have a pl/sql statement which looks like this:
WITH OrderedByDateTable     AS
     SELECT     gsp.*, DENSE_RANK () OVER (ORDER BY A_varChar_col1,
decode(upper('COMPLIANCETICKSDATE'),'TASKNBR',TASK_NBR,
'DESCRIPTION', DESCRIPTION,
'PARTNBR', PART_NBR,
'PARTSERIALNBR', PART_SERIAL_NBR,
'SORTDATE', TO_DATE(MIN_EST_DUE_DATE),
'COMPLIANCETICKSDATE', COMPLIANCE_DATE,
TASK_NBR
)DESC NULLS LAST,task_nbr,description,enrtask_id)     AS r_num
     FROM     GT_STATUS_PAGING gsp
SELECT     *
FROM     OrderedByDateTable
The result that i am expecting is that the dense_rank should order the compliance_date column in desc order and finally gives ranks to the rows.
But i am getting the resultset in some order all the time, but it is neither ASC or DESC.
But if for debugging purposes, lets say if i replace the COMPLIANCE_DATE column with DESCRIPTION column again it works perfectly fine giving me the descriptions in DESC order along with the ranks. But for both the date fields above it doesnt work.
Can anyone please help me on how to solve this?

user12270778 wrote:
Hi,
i have a pl/sql statement which looks like this:
The result that i am expecting is that the dense_rank should order the compliance_date column in desc order and finally gives ranks to the rows.
But i am getting the resultset in some order all the time, but it is neither ASC or DESC.
Can anyone please help me on how to solve this?The problem is an implicit date conversion that takes place.
Because the first parameters of your decode are strings, the COMPLIANCE_DATE column is also converted into a string. This string is then sorted alphanumerically. The default format mask is often DD-MON-RR. Therefore your date column would be sorted by day, then by the name of the month and so on.
Fast solution would be to do an explicit conversion from date into strings that match the ordering.
WITH OrderedByDateTable     AS
        (     SELECT     gsp.*, DENSE_RANK () OVER (ORDER BY A_varChar_col1,
                     decode(upper('COMPLIANCETICKSDATE'),
                               'TASKNBR',TASK_NBR,
                               'DESCRIPTION', DESCRIPTION,
                               'PARTNBR', PART_NBR,
                               'PARTSERIALNBR', PART_SERIAL_NBR,
                               'SORTDATE', TO_DATE(MIN_EST_DUE_DATE),
                               'COMPLIANCETICKSDATE', to_char(COMPLIANCE_DATE,'YYYYMMDD HH24:MI:SS'), /* this is the important bit */
                               TASK_NBR
                               ) DESC NULLS LAST,task_nbr,description,enrtask_id)     AS r_num
                    FROM     GT_STATUS_PAGING gsp
SELECT     *
FROM     OrderedByDateTable     You should be careful, because the same problem also happens with your SORTDATE column MIN_EST_DUE_DATE.
Edited by: Sven W. on Oct 25, 2012 6:53 PM

Bug (?) - TP3 - Date popup not work in query panel

Steps:
1. In the data control pallette, expand a view object that has a date attribute
2. Drop the "All Queriable Attributes" named criteria onto a page and choose "Query -> ADF Query Panel With Table"
3. Run the page. Click on the icon next to the date field in the query panel to launch the date picker. Notice that nothing pops up
I tried this both in IE7 and FF2 with the same results

Hi Scott,
The error is present in the TP3 release but I couldn't replicate it in one of the latest build so this is fixed for upcoming releases.
Juan C.

Selection screen field not working in Query

Hi Gurus!
I have a small problem with one of my query that I just created for finding status of our customers. I have a code section which handles it all . The problem is that I ahve a user field called "Check date" which I ahve used in selection screen as well as the layout, when I put a value in this field in the selection screen the report dosent give any output " NO data to display" but when I leave it open it does give me the out put with the saem check date as I ahd entered earlier in my selection screen.
I am not sure where my selection code is working wrong . Could anyone please help me out please.
DATA: ls_vakpa LIKE vakpa.
DATA old_date LIKE sy-datum.
old_date = key_date - num_days.
status = 'ACTIVE'.
check_date = old_date.
* (If I entere this field (check_date) with any date
* and run it does not give me output and without
* entry it dioes give output.
SELECT SINGLE * FROM vakpa INTO ls_vakpa
      WHERE kunde = kna1-kunnr
   AND audat > old_date.
      IF sy-subrc <> 0.
    SELECT SINGLE * FROM vakpa INTO ls_vakpa
        WHERE kunde = kna1-kunnr
      AND audat < old_date.
      IF sy-subrc = 0.
      ls_audat = ls_vakpa-audat.
      ls_vbeln = ls_vakpa-vbeln.
    ELSE.
      CLEAR ls_audat.
      clear ls_vbeln.
    ENDIF.
    status = 'INACTIVE'.
ELSE.
    ls_audat = ls_vakpa-audat.
    ls_vbeln = ls_vakpa-vbeln.
ENDIF.
Edited by: Rob Burbank on Apr 7, 2010 12:08 PM

DATA: ls_vakpa LIKE vakpa.
DATA old_date LIKE sy-datum.
old_date = key_date - num_days.
status = 'ACTIVE'.
check_date = old_date.
if old_date is initial.
   old_date = key_date - num_days.
   check_date = old_date.
endif.
SELECT SINGLE * FROM vakpa INTO ls_vakpa
      WHERE kunde = kna1-kunnr
*      AND audat > old_date.
    AND audat > check_date.
IF sy-subrc <> 0.
    SELECT SINGLE * FROM vakpa INTO ls_vakpa
        WHERE kunde = kna1-kunnr
*        AND audat < old_date.
      AND audat < check_date.
    IF sy-subrc = 0.
      ls_audat = ls_vakpa-audat.
      ls_vbeln = ls_vakpa-vbeln.
    ELSE.
      CLEAR ls_audat.
      clear ls_vbeln.
    ENDIF.
    status = 'INACTIVE'.
ELSE.
    ls_audat = ls_vakpa-audat.
    ls_vbeln = ls_vakpa-vbeln.
ENDIF.

Date Variable not working on Query

I have a query that is working just fine and returns the correct values. The problem is that no matter what dates I put in, it always returns all records, not the ones from the variable. Can anyone take a look and see what it is I am doing wrong, or why is it that the date variable has no meaning when I run this.
Here is the query I am using:
SELECT '00001' AS 'Co', T0.CardName AS 'Customer', T0.CardCode AS 'Customer #', T0.Address2 AS 'Ship To Address', T3.City AS 'Ship To City', T3.State, T3.ZipCode, T3.Country, T0.DocNum AS 'Invoice Number', SUM(T1.LineTotal * (100 - T0.DiscPrcnt) / 100) + CASE WHEN SUM(T1.VATSum) <> 0 THEN SUM(T1.VATSum) ELSE 0 END AS 'Invoiced amount', SUM(T1.LineTotal * (100 - T0.DiscPrcnt) / 100) AS 'Sale', CASE WHEN (T1.TAXCODE LIKE ('%EX')) THEN SUM(T1.LineTotal * (100 - T0.DiscPrcnt) / 100) ELSE 0 END AS 'Exempt Sales', CASE WHEN (T1.TAXCODE NOT LIKE ('%EX') AND T1.VatPrcnt = 0) THEN SUM(T1.LineTotal * (100 - T0.DiscPrcnt) / 100) ELSE 0 END AS 'Not Taxed', CASE WHEN SUM(T1.VATSum) <> 0 THEN SUM(T1.LineTotal * (100 - T0.DiscPrcnt) / 100) ELSE 0 END AS 'Tax Base', CASE WHEN SUM(T1.VATSum)
<> 0 THEN SUM(T1.VATSum) ELSE 0 END AS 'Tax', T1.VatPrcnt AS 'Rate', T1.TaxCode AS 'Tax Rate/Area', T2.Name AS 'Tax Area Description', T0.DocDate AS 'GL Date', T0.TaxDate AS 'Document Date',T3.AdresType
FROM OINV T0
Inner Join INV1 T1 on T0.DocEntry = T1.DocEntry
Inner Join OSTC T2 on T1.TaxCode = T2.Code
Left Outer Join CRD1 T3 on T0.CardCode = T3.CardCode and T0.ShipToCode = T3.address
Where (T3.AdresType <> 'b') OR (T0.ShipToCode = ' ') AND (T0.DocDate >= '[%01]' or isnull('[%01]','')='')
and (T0.DocDate <= '[%02]' or isnull('[%02]','')='')
Group By T0.DocNum, T0.CardCode, T0.CardName, T0.Address2, T1.TaxCode, T0.DocDate, T0.TaxDate, T2.Name, T3.ZipCode, T3.City, T3.State, T3.Country, T1.VATPrcnt, T3.AdresType
Order By T1.TaxCode, T0.CardName, T3.AdresType
For Browse

Hi,
Try:
SELECT '00001' AS 'Co',
T0.CardName AS 'Customer',
T0.CardCode AS 'Customer #',
T0.Address2 AS 'Ship To Address',
T3.City AS 'Ship To City',
T3.State, T3.ZipCode,
T3.Country, T0.DocNum AS 'Invoice Number',
SUM(T1.LineTotal * (100 - T0.DiscPrcnt) / 100) + CASE WHEN SUM(T1.VATSum)!= 0 THEN SUM(T1.VATSum) ELSE 0 END AS 'Invoiced amount',
SUM(T1.LineTotal * (100 - T0.DiscPrcnt) / 100) AS 'Sale',
CASE WHEN (T1.TAXCODE LIKE ('%EX')) THEN SUM(T1.LineTotal * (100 - T0.DiscPrcnt) / 100) ELSE 0 END AS 'Exempt Sales',
CASE WHEN (T1.TAXCODE NOT LIKE ('%EX') AND T1.VatPrcnt = 0) THEN SUM(T1.LineTotal * (100 - T0.DiscPrcnt) / 100) ELSE 0 END AS 'Not Taxed',
CASE WHEN SUM(T1.VATSum) !=0 THEN SUM(T1.LineTotal * (100 - T0.DiscPrcnt) / 100) ELSE 0 END AS 'Tax Base',
CASE WHEN SUM(T1.VATSum) !=0 THEN SUM(T1.VATSum) ELSE 0 END AS 'Tax',
T1.VatPrcnt AS 'Rate',
T1.TaxCode AS 'Tax Rate/Area',
T2.Name AS 'Tax Area Description',
T0.DocDate AS 'GL Date',
T0.TaxDate AS 'Document Date',
T3.AdresType
FROM OINV T0
Inner Join INV1 T1 on T0.DocEntry = T1.DocEntry
Inner Join OSTC T2 on T1.TaxCode = T2.Code
Left Join CRD1 T3 on T0.CardCode = T3.CardCode and T0.ShipToCode = T3.address
Where ((T3.AdresType != 'b') OR (T0.ShipToCode = ' ')) AND (T0.DocDate >= '[%01\]' or isnull('[%01\]','')='')
and (T0.DocDate <= '[%02\]' or isnull('[%02\]','')='')
Group By T0.DocNum, T0.CardCode, T0.CardName, T0.Address2, T1.TaxCode, T0.DocDate, T0.TaxDate, T2.Name, T3.ZipCode, T3.City, T3.State, T3.Country, T1.VATPrcnt, T3.AdresType
Order By T1.TaxCode, T0.CardName, T3.AdresType
For Browse
Thanks,
Gordon

Regarding "Data does not match the job definition; job terminated"

Dear Friends,
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid?

Hi dharmendra
Good Day
How are you
I am facing the same problem which you have posted
By any chance have you got the soultion for this
If so please let me know the solution for this.
Thanks in advance.
Cheers
Vallabhaneni

Time/Date Field Not Returned in PDF

I have created a very simple form in LiveCycle Designer 8.0. The form enables the user to input data into columns labeled "name," "change type," and "change date." I used the date/time object for the "change date" row fields.
When my testers (using Acrobat 7.0) email the saved form back to me, all of the fields are populated with the information they entered, except the "change date" column fields. I asked if they used the flyout calendar or typed in the date manually, and all used the calendar.
Is this a compatibility issue, or is there something I need to do to bind the chose value to the field when the form is saved?

The issue with the time portion of date field not displaying in Data tab of a Table window has been posted before - see date format while browsing data
I still get the problem in v1215 connecting to either 9i or 10g databases. Note that this problem does not happen in the SQL Worksheet results area, so simply querying the table data with a select doesn't test this.
As for Ctrl-C, Ctrl-V changing the date format to MM/DD/YYYY HH24:MI:SS when copying data out of the SQL Worksheet Results - I also still get this in v1215.

AT END OF for char field not working

Hi all,
AT END OF (char field) not working,
I sorted the itab and also avoid the stars(*) problem also, but its not working.
Thanks in advance.
Edited by: Vijay Babu Dudla on Jan 28, 2009 11:01 PM

Hi, Niranjan
Test the following Sample Code it will solve out your Problem,
" This is not working properly right now.
TYPES: BEGIN OF t_name,
name1(10), " if You Change Cut the Name2 from the 2nd line and past it up to the Name one will work fine
name2(10),
amount1 TYPE p,
amount2 TYPE p,
END OF t_name.
DATA: it1_sum TYPE STANDARD TABLE OF t_name WITH HEADER LINE,
      wa_it1_sum TYPE t_name,
      it2_sum TYPE STANDARD TABLE OF t_name WITH HEADER LINE,
      wa_it2_sum TYPE t_name.
wa_it1_sum-name1 = 'AAAAAA'.
wa_it1_sum-name2 = 'AAAAAA'.
wa_it1_sum-amount1 = 500.
wa_it1_sum-amount2 = 200.
APPEND wa_it1_sum TO it1_sum.
wa_it1_sum-name1 = 'AAAAAA'.
wa_it1_sum-name2 = 'AAAAAA'.
wa_it1_sum-amount1 = 500.
wa_it1_sum-amount2 = 200.
APPEND wa_it1_sum TO it1_sum.
wa_it1_sum-name1 = 'BBBBBB'.
wa_it1_sum-name2 = 'AAAAAA'.
wa_it1_sum-amount1 = 100.
wa_it1_sum-amount2 = 200.
APPEND wa_it1_sum TO it1_sum.
wa_it1_sum-name1 = 'AAAAAA'.
wa_it1_sum-name2 = 'AAAAAA'.
wa_it1_sum-amount1 = 500.
wa_it1_sum-amount2 = 10000.
APPEND wa_it1_sum TO it1_sum.
wa_it1_sum-name1 = 'BBBBBB'.
wa_it1_sum-name2 = 'AAAAAA'.
wa_it1_sum-amount1 = 105000.
wa_it1_sum-amount2 = 20500.
APPEND wa_it1_sum TO it1_sum.
wa_it1_sum-name1 = 'BBBBBB'.
wa_it1_sum-name2 = 'AAAAAA'.
wa_it1_sum-amount1 = 21000.
wa_it1_sum-amount2 = 22000.
APPEND wa_it1_sum TO it1_sum.
SORT it1_sum BY name1 name2.
LOOP AT it1_sum INTO wa_it1_sum.
APPEND wa_it1_sum TO it2_sum.
AT END OF name2. " When you will use this in this Condition it will give you wrong Because this row is on number two and
                   " it is not changing but the Row one is Changing so it will work fine if LEFT MOST
    SUM.
    wa_it1_sum-name1 = 'End Name 2'.
    wa_it1_sum-name2 = 'End Name 2'.
    APPEND wa_it1_sum TO it2_sum.
ENDAT.
AT LAST.
    SUM.
    wa_it1_sum-name1 = 'At Last'.
    APPEND wa_it1_sum TO it2_sum.
ENDAT.
ENDLOOP.
Please Reply if need more help about it.
Kind Regards,
Faisal

Background Job cancelling with error Data does not match the job definition

Dear Team,
Background Job is getting cancelled when I run a Job on periodically but the same Job is executing perfectly when I run it manually(repeat scheduling) .
Let me describe the problem clearly.
We have a program which picks up files from an FTP server and posts the documents into SAP. We are scheduling this program as a background Job daily. This Job is running perfectly if the files contain no data. But if the file contains data the JOb is getting cancelled with the following messages.
And also the same Job is getting executed perfectly when repeat scheduling is done ( even for files with data).
Time     Message text                                                                       Message class Message no. Message type
03:46:08 Job PREPAID_OCT_APPS2_11: Data does not match the job definition; job terminated        BD           078          E
03:46:08 Job cancelled after system exception ERROR_MESSAGE                                      00           564          A
Please help me in resolving this issue.
Thanks in advance,
Sai.

hi,
If you have any GUI function modules used in the program of job
you cannot run it in background mode.

DOCUMENT SETTING that ALLOW FUTURE POSTING DATE does not work in PL34

Hi Expert,
I am now using SAP B1 2005B (7.40.252) sp:00 pl:34 and realised that the ALLOW Future Posting Date was not working.
I still can remember while I was using pl:11 at B1 2005A, there is no such problem and wish to know when can the bug fix up? in which sp/pl?
Wish to hear goods news ASAP .
Thank you.
Joan.

Basically can you please clarrify your requirement as to what you want to change ..what I understand you would need to change the code for ABAP - RFEBBE00
Value Date code in the above abap
        IF PAR_VALD = 'X'.
          MOVE C2-VALDT TO HLP_VALDT. " VALUE DATE
         write hlp_valdt to umsatz-budat dd/mm/yy.
        ELSE.
          MOVE C8-BALDT TO HLP_BALDT.
          MOVE HLP_BALDT TO HLP_VALDT.
        write hlp_valdt to umsatz-budat dd/mm/yy.
        ENDIF.
           MOVE HLP_VALDT(2) TO UMSATZ-BUDAT.
           MOVE HLP_VALDT2(2) TO UMSATZ-BUDAT3.
           MOVE HLP_VALDT4(2) TO UMSATZ-BUDAT6.
Regards
Anurag
Message was edited by: Anurag Bankley

The Restriction option to NOT ALLOW CHANGES to Mobile or Cellular data does not work why is this ?

The Restriction option to NOT ALLOW CHANGES to Mobile or Cellular data does not work why is this ?

Hi there,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
Additionally, you may want to try completely disabling and re-enabling restrictions.
-Griff W.

Date field not working in Query definition

Similar Messages

Maybe you are looking for