DOCUMENT SETTING that ALLOW FUTURE POSTING DATE does not work in PL34
Hi Expert,
I am now using SAP B1 2005B (7.40.252) sp:00 pl:34 and realised that the ALLOW Future Posting Date was not working.
I still can remember while I was using pl:11 at B1 2005A, there is no such problem and wish to know when can the bug fix up? in which sp/pl?
Wish to hear goods news ASAP .
Thank you.
Joan.
Basically can you please clarrify your requirement as to what you want to change ..what I understand you would need to change the code for ABAP - RFEBBE00
Value Date code in the above abap
IF PAR_VALD = 'X'.
MOVE C2-VALDT TO HLP_VALDT. " VALUE DATE
write hlp_valdt to umsatz-budat dd/mm/yy.
ELSE.
MOVE C8-BALDT TO HLP_BALDT.
MOVE HLP_BALDT TO HLP_VALDT.
write hlp_valdt to umsatz-budat dd/mm/yy.
ENDIF.
MOVE HLP_VALDT(2) TO UMSATZ-BUDAT.
MOVE HLP_VALDT2(2) TO UMSATZ-BUDAT3.
MOVE HLP_VALDT4(2) TO UMSATZ-BUDAT6.
Regards
Anurag
Message was edited by: Anurag Bankley
Similar Messages
-
Hi all,
I am new to Flex so I try some stuff to get myself into
AS/Flex in a good way (I hope :)).
I wrote a small class that encapsulates the HTTPService class
using AS. Then I tried to send some data and I get a response from
my server but the POST-Data I try to send does not come up.
Everything else seems to wokr in my class...
Code attached!!!
Anyone knows why there is no POST-Data sent to my PHP? When I
alert the contents of my _objPostData.objPostData I get the Data I
entered in my edtLoginUsername/edtLoginPassword. So what goes
Wrong???
Thx
polysign"polysign.lu" <[email protected]> wrote in
message
news:gc7dga$ise$[email protected]..
> Hi all,
>
> I am new to Flex so I try some stuff to get myself into
AS/Flex in a good
> way
> (I hope :)).
> I wrote a small class that encapsulates the HTTPService
class using AS.
> Then I
> tried to send some data and I get a response from my
server but the
> POST-Data I
> try to send does not come up. Everything else seems to
wokr in my class...
>
> Code attached!!!
>
> Anyone knows why there is no POST-Data sent to my PHP?
When I alert the
> contents of my _objPostData.objPostData I get the Data I
entered in my
> edtLoginUsername/edtLoginPassword. So what goes Wrong???
Are you SURE you're sure that no post data is getting sent?
To me it just
looks like you're not actually WAITING for the result by
attaching an event
listener to the result event. Instead, you're trying to read
the result
event immediately.
HTH;
Amy -
The Restriction option to NOT ALLOW CHANGES to Mobile or Cellular data does not work why is this ?
The Restriction option to NOT ALLOW CHANGES to Mobile or Cellular data does not work why is this ?
Hi there,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
Additionally, you may want to try completely disabling and re-enabling restrictions.
-Griff W. -
The Software that came with my book does not work. CISCO CCENT / CCNA ICND1 by wendell odom
Hello this is my first post on cisco support and hope I can get some help. I recently purchased the book CISCO CCENT / CCNA ICND1 by wendell odom and when I used the CD to install the Pearson Practice exams, it does not work. I tried everything! It even asks for a activation code, which on the CD It says "Refer to the Activation Code Included in the DVD Sleeve when Registering Pearson IT Certification Practice Test Software"I don't see anything related to a Activation Code anywhere on the CD OR on the sleeve! So now I can't use that.
The Network simulator Wendell odom uses in his videos is already outdated it seems and I can't get mine to work. Why? Because I bought this book in hopes of this being a beginner book and praying the person won't skip information to actually set up the book. So now the videos are useless because I can't connect because I have no idea how...
The Network Simulator lite, wow 3/3 When giving me software to use. The Prompt command does not work, Only the enter key will work but when I try to put in a password I can't hit anything else but enter.
I hope I can get help from a more official member as to seeing how I bought this book and I can read but whats really the point if I don't have the hands on training?Keunepete,
When I ordered my books for the ICND1 and ICND2, they came with a CD in the back pocket (sleeve) of the book. Along with the CD was a thick piece of paper that had the activation code on it. It was a white, square piece of paper with big black print on it. Did you buy your book used? Was the CD sealed in the back pocket?
-Zach -
Some websites need Western ISO 8859-1 character set to run properly and you have taken it away in favour of "other(including Western)", now the site does not work properly. Why did you take it out and can you please put it back.
ISO-8859-1 and Windows-1252 should be equivalent. Can you provide an example of a page that doesn't display properly?
If you have to manually select a character encoding to view the page correctly, then the site is broken and you should notify its owner that it needs be fixed. Websites specify the character encoding in one of two ways:
* [http://www.w3.org/International/tutorials/tutorial-char-enc/ Handling character encodings in HTML and CSS | W3C]
# The ''Content-Type'' response header.
# The ''meta'' tag in the page source.
''Henri Sivonen (:hsivonen) wrote:''
<blockquote>We are in the process of implementing http://encoding.spec.whatwg.org/ . The process involves removing support for legacy character decoders that aren’t really necessary for supporting existing Web content.</blockquote> -
Hello,
After the latest upgrade to Mozilla 32 a previously recorded imacros scirpt in which the data was being imported into mozilla from a csv file keeps erroring out. This same problem occurred with the with the upgrade to Mozilla 30 and was fixed when Mozilla was upgraded to 31. Can you please advise on how to correct the problem so that csv files can be used in conjunction with imacros scripts. I would like to point out that imacros still works without the use of csv files, but when you introduce a csv to the script the imacros does not work.
Thank you,
Eugenehello eugene, please directly contact the imacros extension developers through the means provided at their [http://forum.iopus.com/viewforum.php?f=11 forum] - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon for new firefox versions. thank you...
-
Calling test sequence from CVI DLL that use ATL COM object does not work
I am trying to call some DLL function writen in CVI from teststand. The CVI DLL is using ATL COM object(Written by me).
The ATL COM object making instance of several ATL COM object inside it (including two controls that contains dialog). If I use a client writen in VC++ 6 and use the ATL COM (writen by me) works perfectly. But if I try to use it from CVI DLL it does not work any more.
What is wrong? The client is passing an IUnknow interface to my component. Can anybody explain me what is wrong?It is not clear from your question as to what is specifically failing. If possible, one option would be to remove TestStand from the picture and see if the problem still occurs using a CVI EXE that invokes the CVI DLL.
Scott Richardson - NI
Scott Richardson
National Instruments -
I just bought an Iphone 4 from straight talk. My camera does not work. The shutter does not open and when it does open there is a black screen. I am very upset. I have wanted this phone for awhile. I want the issue fixed.
ThanksTake the iPhone to an Apple store genius bar for testing, and if it is defective and under warranty they will replace. Since you say iPhone 4, was this a used or refurbished iPhone?
-
HT2534 Why does my password change after it was set and then 10 min latter does not work
Can you conirm why my login to Itune now does not work with any od the store purchase, I want to BUY but it does not work
Do we have to have two password for the same email address Stor and Ituns?The same password should work whether it's authorising the account on your computer's iTunes, signing in to view the account, or buying/re-downloading items from the store with it. What happens when you try to buy something ? Have you tried signing out (Store > Sign Out menu option) and signing back in and seeing if it then works ?
-
Posting date = Value date does not work
hi,
this is the problem given by them,
symptom:
When the parameter 'Posting date is value date' is active, the posting date of all movements of a bank statement is the bank statement date and not the value date of the individual movements of the bank statement.
other terms:
RFEBBE00,CODA,Belgian Bank statement,PAR_VALD,FEBPDO-BEVALD,FEBBEVALD
Reason & Prerequisites:
The program converts the belgian bank statement format to the Multicash format.The multicash format uses the bank statement date as the posting date.
I want to know how the logic is done so that we will get the posting date = value date and in which user exit is it written?
Plz help me.
Regards,
ShaliniBasically can you please clarrify your requirement as to what you want to change ..what I understand you would need to change the code for ABAP - RFEBBE00
Value Date code in the above abap
IF PAR_VALD = 'X'.
MOVE C2-VALDT TO HLP_VALDT. " VALUE DATE
write hlp_valdt to umsatz-budat dd/mm/yy.
ELSE.
MOVE C8-BALDT TO HLP_BALDT.
MOVE HLP_BALDT TO HLP_VALDT.
write hlp_valdt to umsatz-budat dd/mm/yy.
ENDIF.
MOVE HLP_VALDT(2) TO UMSATZ-BUDAT.
MOVE HLP_VALDT2(2) TO UMSATZ-BUDAT3.
MOVE HLP_VALDT4(2) TO UMSATZ-BUDAT6.
Regards
Anurag
Message was edited by: Anurag Bankley -
My iPad does not recognize my Apple ID. I have completed a reset several times (as requested).
The re-set is shown as successful but then doesn't work..I'm locked out of everything!!!To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. When you do this you may find that the password for your old ID isn't accepted. If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
I have 2 sets of playlists in the sidebar of itunes. I have recently upgraded to 10.6.1.7 but this condition remains the same
The top list refers to greyed out listings and does not function
The list below works fine
How do I get rid of the "false" list?I think the greyed out playlists must be listed from your device which is set up to mirror your library. Because the device is synced you can't edit content directly on the device. From the top of the left-hand column do you have?
Library > Music, Movies...
Store > iTunes Store, iTunes Match...
Devices > <Your Device> > Music, Movies, and all the other "dummy" lists...
Genius > Genius, Genius Mixes...
Playlists > iTunes DJ, and then all your playlist folders and playlists...
If so then that is perfectly normal when your device is connected, either directly or over wi-fi and you have the lists expanded. Simply click the small triangle to the left of the device name to hide all the playlists.
tt2 -
Servlet sample "navimage.png.java" from CQ5-Docu "How to get fully featured Website" does not work.
When working on the sample described in "How to create a fully featured Website", I got an error in the part "Creating the Top Navigation Component". I have discussed this at the page itself (see the comments there) and in the sling mailing list. I was told, this forum would be the best place to find a solution. So I will ask the remaining question here:
The sample uses a servlet "navimage.png.java" to create dynamically top navigation buttons with a meaningful text displayed.
We have got a node "/content/mywebsite/en/products" (there are more, but it is easier to explain when focusing on one of them) with jcr:primaryType=cq:Page with childnode jcr:content with the property sling:resourceType=mywebsite/components/contentpage.
The path "/apps/mywebsite/components/contentpage" contains a node body.jsp. The request http://localhost:4502//content/mywebsite/en/products.html renders the node /apps/mywebsite/components/contentpage/body.jsp.
The body.jsp includes another jsp "topnav.jsp" which refers to /content/mywebsite/en/products.navimage.png by the expression "src="<%= child.getPath() %>.navimage.png"></a><%".
The servlet "navimage.png.java" has been placed to /apps/mywebsite/components/contentpage/navimage.png.java. See inserted screenshot for the layout.
When issuing the request, none of the expected buttons is displayed. The "Recent Requests"-tab at the OSGi-Console shows a whole bunch of message requests.
The "GET customers.navimage.png", "GET services.navimage.png" and "GET products.navimage.png" tell me, that the request has been resolved (excerpt from the messages):
10 (2013-02-01 15:45:18) LOG Including resource JcrNodeResource, type=mywebsite/components/contentpage, superType=null, path=/content/mywebsite/en/products/jcr:content (SlingRequestPathInfo: path='/content/mywebsite/en/products/jcr:content', selectorString='navimage', extension='png', suffix='null')
10 (2013-02-01 15:45:18) TIMER_START{resolveServlet(JcrNodeResource, type=mywebsite/components/contentpage, superType=null, path=/content/mywebsite/en/products/jcr:content)}
10 (2013-02-01 15:45:18) TIMER_END{0,resolveServlet(JcrNodeResource, type=mywebsite/components/contentpage, superType=null, path=/content/mywebsite/en/products/jcr:content)} Using servlet /apps/mywebsite/components/contentpage/navimage.png.java
10 (2013-02-01 15:45:18) LOG Applying Includefilters
But the "GET navimage.png" does not find anything:
10 (2013-02-01 16:08:06) TIMER_END{10,ResourceResolution} URI=/apps/mywebsite/components/contentpage/navimage.png resolves to Resource=NonExistingResource, path=/apps/mywebsite/components/contentpage/navimage.png
10 (2013-02-01 16:08:06) LOG Resource Path Info: SlingRequestPathInfo: path='/apps/mywebsite/components/contentpage/navimage.png', selectorString='null', extension='png', suffix='null'
10 (2013-02-01 16:08:06) TIMER_START{ServletResolution}
10 (2013-02-01 16:08:06) TIMER_START{resolveServlet(NonExistingResource, path=/apps/mywebsite/components/contentpage/navimage.png)}
10 (2013-02-01 16:08:06) LOG {0}: no servlet found
So the servlet has been detected. Why isn't it displayed. When I place a real picture in the path (navimage.png) the sample works fine.
- What can I do to detect the cause of the error
- When becomes the servlet compiled and where is the class-file stored?
Thank you for your support.
UlrichI almost found it now. The reason was, that I had not copied (puposely!) the images-folder to the design-folder (/etc/design/mywebsite). The servlet itself requires a node from this folder
line 64: "String imgPath = new String(dg.getDesignPath(currentPage)+"/images/navimage_bg.jpg");"
line 65: "Layer bg = ImageHelper.createLayer(ctx.resolver.resolve(imgPath));"
The servlet must have failed and this is why I didn't see any buttons o my page.
I say, I have not supplied the images purposely, because I don't like to introduce too much stuff without knowing what it is meant for. I prefer to cause an error. Learning by researching errors is most of the time more effective than having something run without exactly to understand the prerequisites.
At the end this is also true for this case. I had many discussions on several platforms, read a lot of documents to go this short step.
Thank you.
Ulrich -
Foreign Exchange - Posting date - updation - Not Working Properly
Hi Friends,
At the time of posting the Purchase invoice in Transaction Code MIRO, the system is picking the Exchange rates form the table based on our posting date in the Invoice screen.
System is not updating the exchange rate, if we change the Posting date just before posting.
Example:
Transaction code MIRO
Posting date 21.01.2010; Exchange rate picked by system - 46.67 (USD and INR) Maintained in Table - 21.01.2010 - Rs.46.67
before posting we are changing the posting date from 21.01.2010 to 22.01.2010
Posting date 22.01.2010; Exchange rate picked by system - 46.67 (USD and INR) maintained in Tabl - 22.01.2010 - Rs.46.99
To bring the correct exchange rate into effect, We are coming out of the Transaction code and Re-entering the correct posting date.
Is there is any solution to make the system pick the exchage rate whenever we change the posting date?
Thanks in advance friends and colleguesThanks for Quick reply
I have a separte Exchange rate in PO (purchase Order) and I have not activated the fixed Exchage rate in the Purchase Order
If I have activated the Fixed Exchange rate in Purchase order - then the system will not accept other Exchange rates in Transaction Code MIRO (booking LIV)
I have not activated the Fixed Exchange rate in Purchase order (Please have a look at the Purchase Order - A check box for maintaining the Fixed Exchange rate through out the P2P Cycle.
If the fixed exchange rate is notactivated in PO, the system will pick the Posting Date in the Transaction Code MIRO (LIV) for calculating the Exchange rate.
Now my query is why the system is not changing the Exchange rate automatically when I change the Posting date in Transaction Code MIRO. Please also let me know what should be done from our side so that whenever I change the posting date in Transaction Code MIRO, the system should pick the Exchange Rate according to the Posting Date in Transaction Code MIRO.
Thanks for showing Interest
Thak you and Kindest Rgeards
Srikaanth -
Setting transient VO attributes defaut value does not work
Hi,
I try to set default values to transient attributes but it dowes not work the value retuened after the executequery() is null.
Please help.
Thnaks
JOTransient attributes will be cleared on VO requery
what is your requirement ?
Thanks
Tapash
Maybe you are looking for
-
How to find the frequently updated columns in a table
Hi , I need to find out all the columns of a tables which are frequently getting updated. is there any way that I can achieve this ? I am not sure if any meta data information for DML operations exist in Oracle 9 i. Any input is welcome. Thanks in Ad
-
Why is -100% saturation still yielding faint colors?
When working in "develop" - "basic", using adjustment brush at -100% saturation is still leaving my image with faint colors..... why would this happen and what am I missing to make this process work correctly? Thanks..
-
Cannot create HTTP client Exception in Http -- XI -- RFC scenario
Hi, We are testing Http --> XI --> RFC scenario While testing this scenario from RWB we are getting following error message in the SXMB_MONI logs: <?xml version="1.0" encoding="UTF-8" standalone="yes" ?> - <!-- Call Adapter --> - <SAP:Error xmln
-
Validation Error You must correct the following error(s) before proceeding: Failed to authenticate the SAML response. If this keeps happening, please contact the administrator.
-
Multiple runtime armature scenes
I am having multiple armatures that allow the user to interact with it. when I test the scene (2) with the armature it works fine but when i am in scene (1) and go to scene two it does not move? here is the following code for my scene 1 - stop(); sce