Date format in Table Editor

I am using Oracle 8.1.7. I tried to set the date format by setting the NLS_DATE_FORMAT variable, but it worked for sqlplus only. How can I set it for the Enterprise Manager's Table Editor? Thanks

I guess you have to change that parameter in init.ora file of the database. According to what I know you can not set that format in OEM.
Joel P�rez

Similar Messages

Date format in table TCURR

In table TCURR the Value from field holds the date in the following format 79909771. What does this mean in normal date format?

99999999 - 79909771 = 20090228 = 28/02/2009

4.0EA1 Entering date values in table editor

Hello out there,
I don't know if that has been reported already. So I'm doing it again.
I have a table containing a date column and set my NLS_DATE_FORMAT to 'DD.MM.YYYY HH24:MI:SS'.
In version 3.2, I could enter date values just by giving a date without time e.g. 29.08.2013. In the table editor of version 4.0, I'm forced to enter 29.08.2013 00:00:00 otherwise the field is cleared after leving it by pressing TAB.
Is there some new preference setting for that? I'm having another table where I want to enter date values with time though...
If that matters, I'm using SQL*Developer 4.0.0.12.27 with JDK 7.0_17 64bit on OpenSuse Linux 12.3 and connecting to Oracle 12.1.0.1.0 on Solaris 10 Sparc64.
As I'm writing the JDK version, could it be that a newer JDK solves that issue? I'll try that.
Regards,
dhale

I'm thinking that it should assume all zeros for the time portion in this scenario, since that's how sqlplus (and, I believe, previous SQL Developer releases) handles it. For example:
SQL> alter session set nls_date_format='YYYY-MM-DD HH24:MI:SS';
Session altered.
SQL> select to_date('2013-09-10') from dual;
TO_DATE('2013-09-10
2013-09-10 00:00:00

Date format in table

incorrect date format saved thru transaction spro>General settings>Currencies>Enter Exchange rates. date format entered is 98.98.9898 now the system wont allow you to maintain exchange rates without specifying correct date format for the entries. in tables TCURR i cannot get the entries as they are stored in nines compliment. how then can i delete the entries with abap script??

Hi,
use delete statement on TCURR table.
ex:
delete from TCURR where KURST = <your exchange rate type>.
commit work.
Reward points for helpful answers,
Satish
Message was edited by:
Satish Panakala

SQL* Loader to load data format into tables??????

Hi,
Hai I am very much new to Oracle. I am trying to load data into a table using SQL*Loader and i getting error while it is using the data format.
the format used in data file is "Sep 6 2001 12:00:00:000AM"
and when i used to_date( :accountDate, 'YYYY-MM-DD HH:MI:SS AM or PM') function it throws me an exception like
"ORA-01821: date format not recognized". so anybody can help me to insert data with out changing the data file, whould be really helpfull
thanks
vijay

Also it looks like you need to change your date format mask.
If your data is formatted as "Sep 6 2001 12:00:00:000AM"
then you should use to_date( :accountDate, 'Mon DD YYYY HH:MI:SSAM')
This will work with a two digit second field, but not a three digit second field.

Convert Creationtime column to date format in table cwsys.cw_workspaces_tab

How to convert the creationtime column value to date in the table cwsys.cw_workspaces_table using sql or otherwise.
-Tarun

I'm pretty interested in this one as several reports can be created using this field, any inside help??

Change date format in table?

Hi all,
I'm trying to make my first VB.NET iview and I need some help! I can already display the results of a RFC in a databound table, but now the dates are displayed in YYYMMDD format. How can I change this to a .NET date (DD/MM/YYYY)?
Thanks!
Liesbeth

What you want to do is a kind of fomating the data in the cells. One possible way is to subscribe to the ItemDatabound event of the Table and format the contents of the cell accordingly:
Private Function ReformatDate(ByVal format As String)
    Return format.Substring(6, 2) + "/" + format.Substring(4, 2) + "/" + format.Substring(0, 4)
End Function
Private Sub Table1_ItemDatabound(ByVal sender As Object, ByVal e As SAP.Web.UI.Controls.Table.ItemEventArgs) Handles Table1.ItemDatabound
    Dim dateView As TextView = CType(e.Item.Cells(DateColumnIndex).TableCellContent, TextView)
    dateView.Text = ReformatDate(dateView.Text)
End Sub
DateColumnIndex is the index of the column that has the date field.
There is an even easier tricky way to do it: If you databind the table at design-time, the framwork creates databinding expressions for the TextViews in the cells that look like
Text='<%# DataBinder.Eval(Container.Parent, "DataSourceRow.DataItem.Fldate") %>'
You can change this to contain your formatting function, e.g.
Text='<%# ReformatDate(CType(DataBinder.Eval(Container.Parent, "DataSourceRow.DataItem.Fldate"), string) %>'
You can change the expression either in HTML view or usign the DataBindings property editor of the cell's TextView. In this case of cause you don't need the Table1_ItemDatabound event handler.

SSRS date format in Expression Editor issue

Hi,
In the SSRS Report I am using a date field in the expression(=Fields!StartDate.Value), it returns the values in 'mm:dd:yyyy hh:mm:ss'. I dont want the hh:mm:ss part, I want only mm:dd:yyyy. is it possible using the expression editor with the built in SSRS functions?
Thanks,

Hi Mahasweta,
Thanks a lot again ......=formatdatetime(Fields!StartDate.Value,2) works .......
Please Note : While using format(Fields!StartDate.Value,"mm/dd/yyyy"), i didnt get the 'mm' part, there was '00', rest dd and yyyy works file. Where as =formatdatetime(Fields!StartDate.Value,2) works perfectly.
In the =formatdatetime(Fields!StartDate.Value,2) expression, what does this '2' stands for? where shall i get more information....

Helps on date format

Hi all,
I got the column in table A where the date format is dd/mm/yyyy ( 01/03/2005), and another table B where the date format is dd/mm/yyyy HH24:MI:SS. So in order to let the two table to talk to each other, I hv the following query
B.transaction_date >= TO_DATE(A.start_date , 'DD-MON-RRRR HH24:MI:SS')
B.transaction_date <= TO_DATE(A.end_date, 'DD-MON-RRRR HH24:MI:SS')
I hv problem with the end result b'cos of the date format in table A is dd/mm/yyyy whereas the transaction_date in table B has the format with time. How can I format or convert the date in the table B to be in defaulted time such as A.start_date 00:00:00 and b.end_date 23:59:59 ??
How to format this ? please helps. Thanks
Rgds
Lim

Hello
Are the transaction_date, start_date and end_date columns all DATE data types?
If so, all DATE columns have the time component but it may be truncated i.e. set to 00:00:00. To do a date range in your case you could do something like:
B.transaction_date >= A.start_date
AND
B.transaction_date < A.end_date + 1By using this construct you are forming a range between today at midnight and tonight at 23:59:59, so you don't have to worry about setting the time component on your end_date.
HTH

Data Format Issues

I have 2 tables
1) Test_Date with varchar2(30) as Data type
2) Update_date with date format
create table test_date
(dt_maintained varchar2(30),
dt_updated    varchar2(30))
INSERT INTO (DT_MAINTAINED,DT_UPDATED)
VALUES('07/02/200901:07:24','07/02/200901:07:25');
CREATE TABLE UPDATE_DATE
(DT_MAINTAINED DATE,
DT_UPDATED     DATE);I am getting error when i try to insert data into UPDATE_DATE Table which have Date as data Type
insert into update_date(DT_MAINTAINED,DT_UPDATED)
select to_char(to_DATE(dt_maintained,'dd/mm/yyyyhh:mi:ss'),'DD-MON-YYYY HH:MI:SS'),
to_char(to_DATE(dt_updated,'dd/mm/yyyyhh:mi:ss'),'DD-MON-YYYY HH:MI:SS')
from test_dateAny help is appreciated

Your NLS_DATE_FORMAT is probably set to 'DD-MON-YY'.
If you want default output for date values like 'dd/mm/yyyyhh:mi:ss' you should use
alter session set nls_date_format='dd/mm/yyyyhh:mi:ss';If you don't understand, you can try:
alter session set nls_date_format='dd/mm/yyyyhh:mi:ss';
select sysdate from dual;
alter session set nls_date_format='DD.MM.YYYY';
select sysdate from dual;
alter session set nls_date_format='DD-MON-YY';
select sysdate from dual;The nls_date_format doesn't matter for the stored date values. A stored date has no special format, but it needs to be formatted when you want to display on screen.
NLS_DATE_FORMAT is the default format for output.
I want to say it again. If you want to store the character values from your test_date table into your update_date table you only need to convert the values to date.
You can use the following command:
insert into update_date(DT_MAINTAINED,DT_UPDATED)
select to_DATE(dt_maintained,'dd/mm/yyyyhh:mi:ss'),
         to_DATE(dt_updated,'dd/mm/yyyyhh:mi:ss')
from test_date;Edited by: hm on 19.10.2010 00:07

FDM11 Table Editor

Hi
I am not able to find table editor in FDM11 which was available in FDM931.How can i see FDM table data now
Is this some installation config issue??Pls reply

The table editor was identified as a potential security & SOX compliance risk. Moreover, direct manipulation within the tables potentially compromises the stability of the application.
You can view tables through the reports module.
I strongly advise against direct manipulation of data via a table editor (ex: SQL Manager, Toad, etc).

Inserting data from one table to another in different format

Hello,
I would like to know what I am doing wrong with the following code when I write a data from one another to another table in a different format. I am now learning PL/SQL and am using this as
a test problem.
I have a table called students which has the following columns:
SQL> desc student
Name Null? Type
----------- ----------------STUDENT_ID NUMBER(10)
COURSE VARCHAR2(10)
CREDITS NUMBER(10)
I have created another table called new_student which has the following structure:
SQL> desc new_student
Name Null? Type
----------------------------------------- -------- ------------- STUDENT_ID NUMBER(10)
COURSE VARCHAR2(30)
CREDITS VARCHAR2(10)
The data in the student table is:
SQL> select * from student;
STUDENT_ID COURSE CREDITS
1 Science 4
1 History 3
2 Science 4
2 History 3
2 Math 4
3 Sociology 3
3 Psycology 3
I want to store the STUDENT table data in NEW_STUDENT table as:
STUDENT ID COURSES CREDITS
1 Science/History 4/3
2 Science/History/Math 4/3/4
3 Sociology/Psycology 3/3
This is my code:
DECLARE
-- Get all the student IDs
CURSOR studentlist_cursor IS select distinct student_id from student ORDER BY student_id;
-- Get the information for each student ID
CURSOR courses_cursor(nstudentid number) is select course, credits from student where student_id=nstudentid;
nIndex     INTEGER;
pltcourses     DBMS_SQL.VARCHAR2_TABLE;
pltcredits     DBMS_SQL.NUMBER_TABLE;
newcourses varchar2(50);
newcredits varchar2(10);
BEGIN
FOR student_rec IN studentlist_cursor
LOOP
nIndex:=0;
-- Loop through each student ID from student_rec to get the
--courses and creditsstudent ID
FOR courses_rec in courses_cursor(student_rec.student_id)
     LOOP
     nIndex:=nIndex+1;
     pltcourses(nIndex):=courses_rec.course;
-- Store the course data for each student ID in newcourses
-- while doing so check if it is null or put a '/' between each course
loop
if newcourses is null then
newcourses:=pltcourses(nIndex);
else
newcourses:=newcourses||'/'||pltcourses(nIndex);
end if;
end loop;
     pltcredits(nIndex):=courses_rec.credits;
--Store credits data in variable newcredits
--If the newcredits is not null then put a '/' between each credits
loop
if newcredits is null then
newcredits:=pltcredits(nIndex);
else
newcredits:=newcredits||'/'||pltcredits(nIndex);
end if;
end loop;
-- Insert student id, newcourses, newcredits into NEW_STUDENT
INSERT INTO NEW_STUDENT
(student_id ,
course,
credits
) VALUES
(student_rec.student_id,
newcourses,
newcredits
COMMIT;
-- come out of the student id record and go to the next student --id record
END LOOP;
-- come out of the loop
END LOOP;
END;
While doing so I get an error message:
declare
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at line 23.
The error is at the line:
newcourses:=newcourses||'/'||pltcourses(nIndex);
Can anyone help me by pointing out where the mistake is?
Thank you for reading this long mail.
Thank you.
Rama.

Hi dude
there is lot of error in ur pl/sql.
and u have created table new_student with columns
student_id number(10),
courses varchar2(30),
credits number(10).
first u need to modify ur table.
student_id number(10),
courses varchar2(30),
credits varchar2(10).
Now i am writing whole pl/sql block for u. it will work fine.
DECLARE
CURSOR studentlist_cursor IS select distinct student_id from student ORDER BY student_id;
CURSOR courses_cursor(nstudentid number) is select course, credits from student
where student_id = nstudentid;
nIndex INTEGER;
pltcourses DBMS_SQL.VARCHAR2_TABLE;
pltcredits DBMS_SQL.NUMBER_TABLE;
newcourses varchar2(50);
newcredits varchar2(10);
BEGIN
FOR student_rec IN studentlist_cursor
LOOP
nIndex:=0;
newcourses := null;
newcredits := null;
FOR courses_rec in courses_cursor(student_rec.student_id)
LOOP
nIndex:=nIndex+1;
pltcourses(nIndex):=courses_rec.course;
if newcourses is null then
newcourses:=pltcourses(nIndex);
else
newcourses:=newcourses||'/'||pltcourses(nIndex);
end if;
pltcredits(nIndex):=courses_rec.credits;
if newcredits is null then
newcredits:=pltcredits(nIndex);
else
newcredits:=newcredits||'/'||pltcredits(nIndex);
end if;
end loop;
INSERT INTO NEW_STUDENT
(student_id,
course) VALUES
(student_rec.student_id,
newcourses);
END LOOP;
END;
and please revert back
Regards
Anil

Table date format - How can I display Week 1, Week 2, instead of the date?

I would like to creat a table for my Gantt, that displays the week number unit, as I have as the middle tier in my timescale on the Gantt side of the view. I cannot find how to do this anywhere. I know I can change the way the date is displayed,
format wise, while in the table edit area, however one of the choices is NOT the week #. The data must exsist as the timescale displays it!
My goal is to creat a table that instead of showing the start date for a task, displaces the start week: i.e. Week 1, Week 2, ...ect.
Any help is appreciated,
Craig.

Craig --
Bad news, my friend. What you want to do with the date format in the table cannot be done. The format you see in the Timescale bar is simply not an available date option in any table. Sorry.
Dale A. Howard [MVP]
VP of Educational Services
msProjectExperts
http://www.msprojectexperts.com
http://www.projectserverexperts.com
"We write the books on Project Server"

SSIS 2012 is intermittently failing with below "Invalid date format" while importing data from a source table into a Destination table with same exact schema.

We migrated Packages from SSIS 2008 to 2012. The Package is working fine in all the environments except in one of our environment.
SSIS 2012 is intermittently failing with below error while importing data from a source table into a Destination table with same exact schema.
Error: 2014-01-28 15:52:05.19
   Code: 0x80004005
   Source: xxxxxxxx SSIS.Pipeline
   Description: Unspecified error
End Error
Error: 2014-01-28 15:52:05.19
   Code: 0xC0202009
   Source: Process xxxxxx Load TableName [48]
   Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Invalid date format".
End Error
Error: 2014-01-28 15:52:05.19
   Code: 0xC020901C
   Source: Process xxxxxxxx Load TableName [48]
   Description: There was an error with Load TableName.Inputs[OLE DB Destination Input].Columns[Updated] on Load TableName.Inputs[OLE DB Destination Input]. The column status returned was: "Conversion failed because the data value overflowed
the specified type.".
End Error
But when we reorder the column in "Updated" in Destination table, the package is importing data successfully.
This looks like bug to me, Any suggestion?

Hi Mohideen,
Based on my research, the issue might be related to one of the following factors:
Memory pressure. Check there is a memory challenge when the issue occurs. In addition, if the package runs in 32-bit runtime on the specific server, use the 64-bit runtime instead.
A known issue with SQL Native Client. As a workaround, use .NET data provider instead of SNAC.
Hope this helps.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

'Data Access Error' while trying to delete period using Table Editor in FDM

Hi,
I'm trying to delete a period that has been entered wrongly using Tools->Table Editor option.
But when I try to 'Update Grid' after deleting the Period,I get 'Data Access Error'.
Could any one let me know how to solve the error.
Thanks in advance

Hi Kelly,
There is no data that is entered in that period.The data will be entered for that period next month.
POV is also not set to that period,but still the problem persists.
Thanks

Date format in Table Editor

Similar Messages

Maybe you are looking for