Can't print to Canon IPF610 after upgrading to Mavericks. HELP!!

Since updateing to the OS 10.9 Mavericks, I am no longer able to print to my Canon IPF610 Large Format Printer. I tried upgrading the driver at the Canon website for the OS 10.9 but it's still not working.

I already know about this and this solved my problem 2 years ago when I hooked up the printer for the first time. Now after installing the Mavericks update, it keeps saying the printer isn't connected. I tried using a different ethernet cable, unplugging and plugging printer back in and still the same problem. I can still print to it from my old Apple G5 tower using 10.5.8 and was even able to print with no problems on my Intel iMac using the 10.8. I installed the updated driver for 10.9 on Canon's website and still get the same problem.

Similar Messages

Cannon MP830 can't use the scanner function after upgrading to Mavericks.

I have an Cannon MP830 and now I can't use the scanner function after upgrading to Mavericks. Can someone help?

There is no ICA driver for this model so you won't be able to use Image Capture or Preview. But there is a TWAIN scanner driver and the supporting MP Navigator application available for 10.8 from Canon, so you could try installing these and see if you can scan again.

I cannot configure yahoo small business after upgrading to Mavericks Help needed

Hi Guys,
it is as simple as that:
I cannot configure yahoo small business after upgrading to Mavericks Help needed
Thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

After upgrading to maverick; help & other functions not working

After upgrading to maverick; help and other functions not working?

Sometimes just closing and reopening the Help window will clear up the problem. If it doesn't, log out or restart the computer and try again. Otherwise, you may need to delete the Help cache.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Caches/com.apple.helpd
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder selected. Move the selected folder to the Trash. Log out, log back in, and test. Help pages will be slow to load at first.
If that doesn't work, the problem may be caused by network conditions. It may go away by itself, though I can't say how long you should wait.
A persistent failure to load help data has been reported as an issue with satellite networks. Test on a different network, if possible. I've also seen at least one report that Photo Stream in iCloud can mysteriously interfere with Help. I'm not sure whether that's true, but try disabling Photo Stream, if applicable.*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

How can I restore my card reader after upgrading to Mavericks?

I have a MacBookPro that is not identifying the SD card reader since installing Mavericks. I have heard that ScanDisk has a patch but I have not been able to download it from their site. I have read that downloading the SandDisk patch on a PC and then transferring it to a Mac will fix the problem. I would sure appreciate some help restoring my Mac after uploading to Mavericks. My firewire drive does not seem to be working either. I cannot use my M-Audio firewire interface for recording and editing in ProTools. This represents a lot of down time and/or a pretty big loss of money for me. Can anybody tell me whether Apple provides support for these types of problems or is it completely up to the user to solve them? I am a relatively new Apple user. I bought the MacBook Pro shortly after they were released, about 2 1/2 years ago. Up to that time I was strictly a Windows user. I am surprised Apple did not seem to go to much, if any trouble to warn me of the difficulty I would have after upgrading to Mavericks. Apple, where are you?

Launch the Image Capture app in your Applications folder.
Conenct the card reader.
Then see if Image Capture recognizes the card unde DEVICES top left side of the Image Capture window.
BEFORE upgrading from one OS X to the next, check the websites for your third party software and hardware for compatibility.
Apple is not responsible for third party software and hardware used with your Mac.

Macbook 2012 Mid: Can't mount USB mass storage after upgrading to Mavericks

Hi guys,
I'm having big problems with USB mass storages. After upgrading to Mavericks my Mac doesn't see some USB storage devices (mostly USB sticks and Android phone's memory cards via USB. My external USB 3.0 hard disks work fine) at all even though the devices themselves (for example my Android phone) are clearly recognized according to the System Report. When I plug them in, they don't show up on my Finder or on Disk Utility.
I've searched everywhere and it seems like some other people are having the same problem, none seems to offer a definite solution. I've even formatted my HD and reinstalled Mavericks from the recovery partition. Now it mounts a USB stick that was in one of the USB ports at the time of installation but still doesn't read anything else! The funny thing is when I boot into Windows 8 on my Boot Camp partition, I can mount any USB devices including the USB stick and the Android phone I'm having problems on Mavericks without any problems. I can even see then when I boot into the recovery so there's clearly something wrong with Mavericks.
Any chance someone has figured out a solution for this? Apple should've address this long time ago.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem? Note: If the devices are not in Mac OS X format, they normally won't mount in safe mode, but they should appear in Disk Utility.
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Can't print to Canon LBP7200Cdn after Lion upgrade

Since upgrading to Lion, I can't register (and therefore can't use) my office printer, a Canon LBP7200Cdn.
I tried for weeks to get it to work with the interim driver Canon released with Lion, then gave up and waited for the full driver. Then that didn't work either.
Installation of the driver appears to work fine, but once the printer is registered, printing from any program gives me the error message "/Library/Printers/Canon/CUPSCAPT/Bins/capdftopdl failed".
The problem is the same whether connecting via USB or IP.
I had the same problem when I updated to Snow Leopard 10.6.7, but installing Canon's new driver fixed it. Now nothing works and I haven't been able to print since the summer. No other Mac users are having this problem (but I'm the only one running Lion). Would welcome help from anyone.
Here's the System Profiler info on the printer:
10.0.0.6:
Status:          Idle
Print Server:          Local
Driver Version:          3.40
Default:          Yes
Shared:          No
URI:          cnbma://localhost:59687
PPD:          Canon LBP7200C CAPT (UK)
PPD File Version:          3.40
PostScript Version:          (3010.000) 550
(3010.000) 651
CUPS Version:          1.5.0 (cups-297.2)
Fax support:          No
Scanning support:          No
Printer Commands:          none
CUPS filters:
capdftopdl:
Path:          /Library/Printers/Canon/CUPSCAPT/Bins/capdftopdl
Printer utility:          /Library/Printers/Canon/CUPSCAPT/StatusMonitor/StatusMonitor.app
Printer utility version:          3.40
PDEs:
FinishingPDE.plugin:
Sandbox compliant:          No

I'm having the same issue. I've re-installed the Canon software after deleting all of the folders & files that they talk about in the user manual.
Same issue. /Library/Printers/Canon/CUPSCMFP/Bins/capdftopdl failed
I've sent a note to Canon and here's their first reply.
Thank you for contacting Canon technical support. We value you as a Canon customer and appreciate the opportunity to assist you. We regret that you are experiencing difficulty printing to your imageCLASS MF3010.
We will gladly provide assistance. Unfortunately, it is not clear what is causing this. We will gladly help troubleshoot to isolate the cause:
1. Is the printer connected directly to the computer or through a print server, USB hub or other external device?
Directly to the computer with USB
2. Can you make copies without using your computer? This will verify if the printer is working.
Don't know waiting for my folks to try this.
3. Are you installing drivers from the CD disk or downloading them from the Canon website here:
Downloaded from the website. No Mac sofware on the CD supplied with the printer.
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/imageclass _series/imageclass_mf3010#DriversAndSoftware
With this information, we will be able to better assist you.
We look forward to your reply with the information we have requested regarding your imageCLASS MF3010.
Thank you for choosing Canon.
Sincerely,
David
Technical Support Representative
Special Note: Certain issues are very difficult to resolve via email. If you would prefer to speak to a technician for additional assistance, you may call our special toll-free number for email customers with unresolved issues by dialing 1-866-261-9362, Monday - Friday 8:00 a.m. to 8:00 p.m. ET (excluding holidays). If you prefer to continue to communicate via email, reply to this message and we will respond as quickly as possible.

Canon 495 printer scanner not working after upgrade to maverick

I am sorry I upgraded to Maverick.. My Canon printer/scanner does not work. I upgraded the drivers, etc. I get an error message and the icons drop out as soon as they come up to auto scan or photo.

What is the error message?
Try resetting the printing system.
Reset Printing System

Trouble with Canon 2020Adv after upgrade to Maverick

Hi
We've just upgraded to Maverick and our office Canon 2020Adv no longer even acknowledged print jobs sent to it from the Mac. I followed the comments in earlier posts re problems with Canons post Maverick upgrade and downloaded and installed the new driver. Now I can get the printer to acknowledge that a doc is being sent but it either printer gobbledygook (sorry don't know a better word for it...) from Word or takes forever "processing" and never actually prints anything from Safari....
Any suggestions??
Thanks

Two possible causes for the issue you are having.
1. You are using the Postscript printer driver but your iR ADV C2020 does not have the optional Postscript printer kit. In that case, download and install the UFR 2 v10.3.0 driver
http://support-au.canon.com.au/contents/AU/EN/0100491502.html
2. If you are using the UFR2 driver already, you may have created the print queue using the IPP protocol. The UFR2 driver does not support this. So remove the ADV C2020 from Printers & Scanners and add again, this time selecting HP Jetdirect-Socket for the protocol.

Can't login to my account after upgrading to Mavericks

I have a late 2008 Macbook Pro. I have had no problems up until upgrading to Mavericks. I did a complete backup using Time Machine prior upgrading. I have a 750 GB hard disk with about 70 GB of free space. This computer has been bullet proof for 5 years now.
Anyway, I tried to upgrade to Mavericks when the OS came out but was unsuccessful at that time. It just hung up halfway through the install. I decided to just restore than to waste time figuring out what happened.
Fast forward to yesterday. I decided to give it a try again. The download and install completed without any problems. However, I can not login to my machine using my account. After entering my password, I am just getting the spinning rainbow wheel or whatever it is called. Techincally, I have two accounts, one for me and one for girlfriend. She never used hers so mine has been the only one we have ever used on the computer. That account does have admin permissions and that is also the one where I started the upgrade from.
Things I have tried so far...
1) Added another admin account to try and remove unused applications just in case old programs were no longer compatible. Btw, I can successfully log into this account. This is actually the account were I am logged into currently and using Safari to document this problem.
2) Launched File Utility. I did verify disk permissions and then repair after it completed. No luck. I also did Verify Disk but that did not return any problems.
3) I also did a reinstall of Mavericks again but the same problem still exists.
Btw, I did notice when logged in as Admin to the newly created account, that the Downloads, Desktop and Movies folder under my original user account have a little icon or stop sign next to their name when viewing through Finder. Permission problem? Even if that is the case, not sure why I would not be able to login into my original account.
Any ideas? Worst case I will restore my backup and just forget about Mavericks all together. I guess if I have nothing better to do some day in the future maybe I will do a fresh install and try to restore my personal files back. However that sounds like a lot of work.
Thanks..

Try this

Can't open Appstore on MacBook after upgrading to Maverick

Hi All,
After upgrading my MacBook to OS X 10.9.3 I can't open App Store, Calendar, and Line that I have installed.
Your kindly help will be very much appreciated.
Many thanks,
Thara

The latest update available is v10.9.4. Is that what you meant?

Unable to print with Canon iR2018 after updating OsX Mavericks

Hi,
there's anybody who can help me in finding canon ir2018 drivers for osX Mavericks?

Here is a link to the Canon UFR2 v10.2.0 driver that supports your iR2018 on OS X 10.9.
Please note that when adding the network printer you must use the LPD protocol and select the correct printer model, which will be listed as "Canon iR2018". Do not select the iR2018 that shows UFR II in the model name as this will be for the older v2.43 driver which is not compatible with OS X 10.9.

Can't print from IE 8 after upgrading from Vista to Windows 7

My laptop (HP Elitebook 8530w) uses two HP printers: Color LaserJet CP3525x (at work) and Deskjet 6940 (at home). Both printers are accessed across a local network.
I recently upgraded from Vista Enterprise to Windows 7 Enterprise.
Everything still prints fine (from Word, Adobe Reader, Windows Photo Viewer, etc.), except for IE 8! When I try to print a web page from IE, it prints only the page header, and otherwise the sheet is empty. This symptom occurs on both printers. (And of course this worked fine before the upgrade.)
Any ideas? Thanks for any help.
Jeff
This question was solved.
View Solution.

(same poster)
If anyone else is having this problem, I found the solution on another forum (http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/920588e5-ccc4-4e24-83d6-606...).
Specifically, the following steps solved the problem:
1. If it doesn't already exist, create a directory named "Low" in your directory "C:\Users\<your_user_name>\AppData\Local\Temp\".
2. From a command prompt, issue this command: ICACLS C:\Users\<your_user_name>\AppData\Local\Temp\Low /setintegritylevel (OI)(CI)low
Jeff

Printer no longer works after upgrading to Maverick

I have an Epson TX810FW, multifunction printer/scanner. It wwas working fine until I updated to Mavericks. I now get a message that the scanner function is not supported and I cannot get the printer to work. I need both working, and I have loaded all the latest updates from Epson up to 2.15.1.
Can someone provide an answer that will restore the mrinter to fully operational? Otherwise, how can I reomve Mavericks, as the loss of functionality is more of a downside than any enhancements that Mavericks might claim.

Hi,
I've been experiencing a similar issue with my old, yet working until Mavericks update, OKIPage 14ex. No problem at all with both Lion and Mountain Lion but after Mavericks update the printer cannot print any longer. The printer is connected via a regular USB port, the system recognizes it, I can send a print to its queue but as soon as the print is enqueued the printer goes into hold status and nothing can be done to resume the print.
Since the printer model is quiet old, no driver is avaliable from OKI support, however I'm wondering what Apple did with this update thus being able to produce such a mess.
Of course I tested the printer conncted to another PC and it perfectly works!
I would really appreciate some advice in order to restore the previous situation.
Many thanks.
Marco

Issue printing with Adobe CC after upgrading to Mavericks

After installing OS X Mavericks, when I try printing via Adobe Indesign CC or Adobe Acrobat Pro it seems to shrink the page I am printing. When I print via Preview if I export as a PDF it prints just fine. I've checked for Adobe updates, driver updates, etc. Any help would be appreciated!

Update: I can see that Windows act as it is two displays but the 2nd display is in nowhere and I cannot see it. I mean the window can go out of my normal display (i.e. my laptop) but not to the other monitor. That's why I have to disconnect the 2nd monitor and only use laptop display.

Can't print to Canon IPF610 after upgrading to Mavericks. HELP!!

Similar Messages

Maybe you are looking for