Date picker not working correctly.

Hi all,
I have a strange prob in webdynpro.
I am using Date picker. But once i read it, the value is one day less than that i give.
For eg, i give <b>06/25/2006</b>.. but it reads as <b>06/24/2006</b>.
Please help.
Thanks in advance
gEorgE

Open an OSS message (BC-WD-JAV-RUN).
Armin

Similar Messages

Update using date picker not working?

Hello,
This might be simple for a lot of people here but I can't get it going...
The problem is that, I have a tabular form with 1 text field and 1 date field. I am using a PL/SQL anonymous block transaction to insert/update a view based on the field values. Insert is fine but update on the date field is not working - but no errors. The date field is a date picker('DD-MON-YYYY') column. Kindly help check the problem. Thank you.
Below are some codes that might be helpful
-- update statement in the block
update del_ignore_conchold_v
set     conc_prog_name = apex_application.g_f03(v_row)
       ,remove_entry_date = apex_application.g_f04(v_row)
where   row_id = apex_application.g_f02(v_row);
-- update trigger on the view
CREATE OR REPLACE TRIGGER APPS_TEST.del_ignore_conchold_v_upd_tr
   instead of update
   ON APPS_TEST.DEL_IGNORE_CONCHOLD_V referencing new as new old as old
   for each row
begin
   update apps.del_ignore_conchold_tbl@PROD
      set conc_prog_name = :new.conc_prog_name,
          remove_entry_date = :new.remove_entry_date
    where conc_prog_name = :old.conc_prog_name
    and   remove_entry_date = :old.remove_entry_date;
end;Thanks,
Rownald

Hello,
The output for g_f03(v_row) and g_f04(v_row) appear to be fine. g_f03 only has the actual text and g_f04 has the date(from date picker field) with format like 22-OCT-2009. Below is an excerpt of the code & debug log - might be of help.
Thanks as always.
        if apex_application.g_f02(v_row) is not null then
            wwv_flow.debug('MY PROCESS: g_f02 ' || apex_application.g_f02(v_row));
            wwv_flow.debug('MY PROCESS: g_f03 ' || apex_application.g_f03(v_row));
            wwv_flow.debug('MY PROCESS: g_f04 ' || apex_application.g_f04(v_row));
            -- update stmt
            update del_ignore_conchold_v
            set     conc_prog_name = apex_application.g_f03(v_row)
                   ,remove_entry_date = apex_application.g_f04(v_row)
            where   row_id = apex_application.g_f02(v_row);
            wwv_flow.debug('MY PROCESS: g_f03 ' || apex_application.g_f03(v_row));
            wwv_flow.debug('MY PROCESS: g_f04 ' || apex_application.g_f04(v_row));
-- debug log --
0.09: ...Do not run process "AddRows", process point=AFTER_SUBMIT, condition type=, when button pressed=ADD
0.09: ...Process "Save_Transaction": PLSQL (AFTER_SUBMIT) declare v_row binary_integer; begin for i in 1..apex_application.g_f01.count loop v_row := apex_application.g_f01(i); if apex_application.g_f02(v_row) is not null then wwv_flow.debug('MY PROCESS: g_f02 ' || apex_appli
0.09: MY PROCESS: g_f02 AAE2DlAHKAAAA0qAAB
0.10: MY PROCESS: g_f03 Delete data from temporary table
0.10: MY PROCESS: g_f04 22-OCT-2009
0.11: MY PROCESS: g_f03 Delete data from temporary table
0.11: MY PROCESS: g_f04 22-OCT-2009
0.15: ...Process "Reset Pagination": RESET_PAGINATION (AFTER_SUBMIT) reset_pagination
0.15: Branch point: AFTER_PROCESSINGRownald

Date picker not working on quote registration form

I inserted the date picker as a form field in my Quote Registration form. It works in the web forms preview but when I insert it nothing happens. Here is the sample site: http://coopsupport.businesscatalyst.com/
I tried inserting is as HTML and as a module and neither worked. What did I miss?

Hi,
Something in your template is conflicting here once I remove the template the date picker works as normal.
Please note the conflicts can be with a referenced js or jquery in the template. I would check for this unfortunately scripting is outside our support scope however I'll leave this open to the community to offer any additional suggestions.
Kind regards,
-Sidney

My phone is so slow won't download any apps and data is not working correctly

I have the moto e with straight talk

Hi
This is not a Firefox thing, but there are some general housekeeping activities you can do to make your telephone run much easier.
First of all, uninstall any apps and widgets you do not need. It is amazing how they can clutter up your phone! In the app drawer, long press on an app or widget and drag it to the uninstall option at the top of the screen.
So you have a sizeable SD card in your phone? If so, in Settings app , scroll down to Storage and tap "Move media". As it says on the menu, this will move your media files to your memory card, thus freeing up space on your phone.
Before you leave Storage, scroll up a little and tap on "Cached Data" and selected to clear the cached data.
In Settings>Apps, scroll across to "On SD Card" and tick a few boxes to move some of your apps to your memory card. (Note: With some apps, this may mean that any accompanying widgets will not work, this is a bug with Android).
Once finished, turn off your phone and turn it back on again and you should find your phone has quite a bit more space and is running a bit quicker.

Date Picker not working in Crystal XI Developer

Post Author: laksh_hari
CA Forum: Crystal Reports
Hi,
I recently purchased Crystal Reports XI and am running it on Windows Vista.. The Date picker control does not popup for any date parameter fields.. Can you please let me know why it does that and how I can rectify that?

hi,
I'm able to do this as I chose the validation type JAVA.
Rgds,
Shahnawaz
Edited by: 907938 on Feb 24, 2012 5:22 AM

Date picker not working in new DIF R12.1.3

hi,
I've created a date picker as per guidelined in dev guide. but when my doc gets created it's not showing it.
Any help?
Rgds,
Shahnawaz

hi,
I'm able to do this as I chose the validation type JAVA.
Rgds,
Shahnawaz
Edited by: 907938 on Feb 24, 2012 5:22 AM

Trunc date function not working correctly

Hi,
Another quick question if people don't mind. Bit confused about the trunc date function. I'm following the sql fundamentals exam guide and using their examples:
select trunc(to_date('02-jun-2009 13:00','dd-mon-yyyy hh24:mi')) day from dual;
this returns the 2nd of june, as it should, because, as far as i'm aware, leaving the optional variable out defaults the precision to 'day'. but when i explicitly add the variable 'day', as the guide has done with 'week' 'month' and 'year' in the following examples (so i assume this format is correct rather than dd/mon/yyyy), something goes wrong:
select trunc(to_date('02-jun-2009 13:00','dd-mon-yyyy' hh24:mi'), 'day') day from dual;
this returns the 31st of may. which is incorrect.
however replacing 'day' with 'dd' provides the correct answer of the 2nd again.
this isn't a major issue, it just bothers me that the guide seems (again) to be mistaken, something that is rapidly becoming a trend in their examples. i'd also quite like to know why this is happening, as it will help improve my understanding of sql in general - perhaps there is some sort of default to allow the correct use of the variable 'day' i'm overlooking and that the guide hasn't made clear.
btw, i'm working in sqlplus - although developer has some odd results too.
thanks alot,
nick

967660 wrote:
Hi,
Another quick question if people don't mind. Bit confused about the trunc date function. I'm following the sql fundamentals exam guide and using their examples:
select trunc(to_date('02-jun-2009 13:00','dd-mon-yyyy hh24:mi')) day from dual;
this returns the 2nd of june, as it should, because, as far as i'm aware, leaving the optional variable out defaults the precision to 'day'. but when i explicitly add the variable 'day', as the guide has done with 'week' 'month' and 'year' in the following examples (so i assume this format is correct rather than dd/mon/yyyy), something goes wrong:
select trunc(to_date('02-jun-2009 13:00','dd-mon-yyyy' hh24:mi'), 'day') day from dual;
this returns the 31st of may. which is incorrect.
however replacing 'day' with 'dd' provides the correct answer of the 2nd again.
this isn't a major issue, it just bothers me that the guide seems (again) to be mistaken, something that is rapidly becoming a trend in their examples. i'd also quite like to know why this is happening, as it will help improve my understanding of sql in general - perhaps there is some sort of default to allow the correct use of the variable 'day' i'm overlooking and that the guide hasn't made clear.
btw, i'm working in sqlplus - although developer has some odd results too.
thanks alot,
nick'day' doesn't trunc to the beginning of the day. It truncates to the first day of the week: in your case 31st May.
'ddd' truncates to the beginning of the day.
So, leaving the second parameter out defaults to 'ddd' not 'day'.

Date picker not working in explorer

Hi, I am user explorer for my browsing the Bank website, secured account. I could not select the date from the datepicker, But in other android phone it is possible.
My Nokia lumia 820 is not allowing me to pick the date

Hi Ragu,
The forum is to discuss the problem about HTML, CSS and JavaScript in IE. If your code doesn’t work in IE, please post here. But if it doesn’t work in lumia 820, I recommend you post thread on Windows Phone forum for effective response. Thank you for understanding.
Please refer to the following link.
http://social.msdn.microsoft.com/Forums/wpapps/en-us/home?category=wpapps%2Cwpdev%2Cwindowsphone%2Cwindowsmobile%2Cwindowsphonezh.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Date condition not working correctly in Desktop

Hello,
I have two custom folders in Admin that are joined. One of the folders contains the following query:
SELECT ORGANIZATION_ID, ASSET_NUMBER, MIN(CURRENT_READING_DATE) FIRST_READ_DATE, MIN(CURRENT_READING) FIRST_READING
FROM EAM_METER_READINGS_V
WHERE PREV_DESC IS NULL
Group By ORGANIZATION_ID, ASSET_NUMBER
I want my workbook to report the earliest meter reading that exists, based on the date that is specified in the parameters in Desktop. When I create a parameter for the date, the workbook reports the earliest reading in the database; it ignores the date restriction entered in the parameter. This is the parameter:
First Read Date MIN BETWEEN :First Reading Date and SYSDATE
If I include the date condition in the SQL of the custom folder the workbook functions exactly as it should. The date condition is in the SQL as the following:
and current_reading_date between '01-JAN-2007' and SYSDATE
Since the workbook functions correctly when the condition is coded in the SQL but not when it is based on a parameter, I assume the problem is with the parameter. Any ideas on how I may correct this?
Thanks,
Steve

Thanks for the response Michael. I tried using the MIN function as you suggested, but I still am not getting the expected result. I’m not sure that I was clear in my initial problem description. I will try to provide more detail with this post.
The reason I have two custom folders is that my original query has a nested Select statement (EAMV) and I couldn’t find a way to pass the parameter from EAMV to Discoverer. Following is the original query. I suppose the first logical questions would be, is there a way to pass the parameter to Discoverer? Would this alleviate the need for the second custom folder?
SELECT K.ORGANIZATION_CODE "ORG" -- ORGANIZATION
, K.ORGANIZATION_ID
,A.NAME "PM SCHEDULE NAME" -- PREVENTIVE MAINTENANCE SCHEDULE NAME
--( (B.RUNTIME_INTERVAL/F.USER_DEFINED_RATE) + D.LAST_SERVICE_END_DATE) "PROJECTED READ DATE" -- USES USER_DEFINED_RATE FROM METER DEFINITION
,(C.LAST_SERVICE_READING + B.RUNTIME_INTERVAL) "PROJECTED READ UNITS" -- NEXT SERVICE READING DUE UNITS
,F.METER_UOM "UOM" -- UNIT OF MEASURE ON METER
,F.METER_NAME "METER NAME" -- METER NAME
,G.SERIAL_NUMBER "MAINT EQ NO" -- MAINTAINED EQUIPMENT NUMBER
,H.C_ATTRIBUTE1 "MAKE" -- MAINTAINED EQUIPMENT NUMBER - MAKE/MANUFACTURER
,H.C_ATTRIBUTE2 "MODEL" -- MAINTAINED EQUIPMENT NUMBER - MODEL
,H.C_ATTRIBUTE4 "SERIAL NO" -- MAINTAINED EQUIPMENT NUMBER - SERIAL NUMBER
,I.SEGMENT1 "ACTIVITY" -- ASSET ACTIVITY
,D.LAST_SERVICE_END_DATE "LAST READ DATE" -- DATE OF LAST PM SERVICE READING
,C.LAST_SERVICE_READING "LAST READ UNITS" -- UNITS OF LAST PM SERVICE READING
,E1.CURRENT_READING_DATE "CURRENT READ DATE" -- DATE OF CURRENT SERVICE READING (FROM METER FORM)
,E1.CURRENT_READING                                   "CURRENT READ UNITS" -- UNITS OF CURRENT SERVICE READING (FROM METER FORM)
,E1.LIFE_TO_DATE_READING "LIFE TO DATE READING" LIFE TO DATE READING
--,(E1.CURRENT_READING - C.LAST_SERVICE_READING) "CURRENT/LAST VARIANCE" -- UNITS SINCE LAST PM SERVICE READING
,( (C.LAST_SERVICE_READING + B.RUNTIME_INTERVAL) - E1.CURRENT_READING ) "PROJECTED/CURR VARIANCE" -- UNITS REMAINING UNTIL NEXT SCHEDULED READING
,J.DESCRIPTION "LOCATION" -- OWNING DEPARTMENT DESCRIPTION OF ASSET NUMBER
,J.DEPARTMENT_CODE
,E1.DISABLE_FLAG
,G.CURRENT_STATUS
,B.RUNTIME_INTERVAL
,Y.SET_NAME
,EAMV.FIRST_READ_DATE READ_DATE
,EAMV.FIRST_READING READING
FROM EAM.EAM_PM_SCHEDULINGS A
,EAM.EAM_PM_SCHEDULING_RULES B
,EAM.EAM_PM_LAST_SERVICE C
,INV.MTL_EAM_ASSET_ACTIVITIES D
,EAM.EAM_ASSET_METERS E
,EAM.EAM_METER_READINGS E1
,EAM.EAM_METERS F
,INV.MTL_SERIAL_NUMBERS G
,INV.MTL_EAM_ASSET_ATTR_VALUES H
,INV.MTL_SYSTEM_ITEMS_B I
,BOM.BOM_DEPARTMENTS J
,INV.MTL_PARAMETERS K
,EAM.EAM_PM_SET_NAMES Y
     ,(SELECT ORGANIZATION_ID, ASSET_NUMBER, MIN(CURRENT_READING_DATE) FIRST_READ_DATE, MIN(LIFE_TO_DATE_READING) FIRST_READING
          FROM EAM_METER_READINGS_V
          WHERE CURRENT_READING_DATE BETWEEN '01-JAN-2007' AND '30-JUN-2007'
          GROUP BY ORGANIZATION_ID, ASSET_NUMBER) EAMV
WHERE A.PM_SCHEDULE_ID = B.PM_SCHEDULE_ID
AND A.ACTIVITY_ASSOCIATION_ID = C.ACTIVITY_ASSOCIATION_ID
AND C.ACTIVITY_ASSOCIATION_ID = D.ACTIVITY_ASSOCIATION_ID
AND D.SERIAL_NUMBER = E.ASSET_NUMBER
AND D.ORGANIZATION_ID = E.ORGANIZATION_ID
AND E.METER_ID = E1.METER_ID
AND E1.METER_READING_ID =
(SELECT MAX(METER_READING_ID)
FROM EAM_METER_READINGS
WHERE METER_ID = E1.METER_ID
AND (DISABLE_FLAG = 'N' OR DISABLE_FLAG IS NULL))
AND E.METER_ID = C.METER_ID
AND E.METER_ID = B.METER_ID
AND E.METER_ID = F.METER_ID
AND D.MAINTENANCE_OBJECT_ID = G.GEN_OBJECT_ID
AND D.ORGANIZATION_ID = G.CURRENT_ORGANIZATION_ID
AND G.SERIAL_NUMBER = H.SERIAL_NUMBER
AND G.CURRENT_ORGANIZATION_ID = H.ORGANIZATION_ID
AND D.INVENTORY_ITEM_ID = H.INVENTORY_ITEM_ID
AND H.ATTRIBUTE_CATEGORY = 'EQUIPMENT DETAILS'
AND D.ASSET_ACTIVITY_ID = I.INVENTORY_ITEM_ID
AND D.ORGANIZATION_ID = I.ORGANIZATION_ID
AND G.OWNING_DEPARTMENT_ID = J.DEPARTMENT_ID (+)
AND I.ORGANIZATION_ID = K.ORGANIZATION_ID
AND A.SET_NAME_ID = Y.SET_NAME_ID
AND Y.SET_NAME IN ('MAIN','COMP')
AND G.CURRENT_ORGANIZATION_ID = EAMV.ORGANIZATION_ID
AND G.SERIAL_NUMBER = EAMV.ASSET_NUMBER
AND K.ORGANIZATION_CODE = 'MCC'
Using this query I want to show the most recent reading (current reading) and then give users the flexibility to enter an earlier date so the earliest reading as of that date will also show. For example, if they enter 1-JAN-2007 as the parameter and there was a reading taken on 2-JAN-07 and 28-JAN-07, the report should show the 2-JAN-2007 reading (in addition to the most recent reading in a separate column). Currently, everything on the report displays correctly, except for the reading based on the parameter.

Input Date does not work correctly In dynamic region

Hello everyone.
I created a view with a dynamic region. When switch to a region with Input Date components, if I click the "Choose Date" button, this region will exit to default region without any error message.
The component works well in default region but not in regions switched by Link.
I tried it in a completely new application and i am sure there is no any problem except the component and the region themselves.
SO, if someone tied doing this and know what cause it and how to fix it?
Edited by: 1007000 on 2013-5-20 下午8:49

Well, i find out the problem. I set the managed bean of the region backing scope, and Input Date is a server-side component. So the taskflow id will lost when i click the Choose Date button.
change the scope to pageflow, and it works.

Why is the Up to date program not working correctly and letting me download Lion when I have a qualifying system?

The Apple online store doesn't seem to recognize my serial number or says it is not correct? What is going on with this???

Well I finally figured out why my serial wasn't working. Apparently it was because my system was customised as opposed to off the rack, not sure why this should be a problem though.
Anyway, I used the old paper and fax method and have received confirmation that it is on it's way. If you haven't received confirmation I'd recommend chasing Apple to find out where it is.

File.data.readUTF(); not working correctly, please help me :)

I downloaded a csv from google in outlook format, but when I try to read it I am getting some errors. For example if I do this:
private function completeHandler(event:Event):void {
var st:String = file.data.readUTF();
after this the st variables first to lines contain something like this
rst Name,Middle Name,Last Name,Title,Suffix,Initials,Web Page,Gender,Birthday,Anniversary,Location,Language,Internet Free Busy,Notes,E-mail Address,E-mail 2 Address,E-mail 3 Address,Primary Phone,Home Phone,Home Phone 2,Mobile Phone,Pager,Home Fax,Home Address,Home Street,Home Street 2,Home Street 3,Home Address PO Box,Home City,Home State,Home Postal Code,Home Country,Spouse,Children,Manager's Name,Assistant's Name,Referred By,Company Main Phone,Business Phone,Business Phone 2,Business Fax,Assistant's Phone,Company,Job Title,Department,Office Location,Organizational ID Number,Profession,Account,Business Address,Business Street,Business Street 2,Business Street 3,Business Address PO Box,Business City,Business State,Business Postal Code,Business Country,Other Phone,Other Fax,Other Address,Other Street,Other Street 2,Other Street 3,Other Address PO Box,Other City,Other State,Other Postal Code,Other Country,Callback,Car Phone,ISDN,Radio Phone,TTY/TDD Phone,Telex,User 1,User 2,User 3,User 4,Keywords,Mileage,Hobby,Billing Information,Directory Server,Sensitivity,Priority,Private,Categories
,,,,,,,,,,,,,,[email protected],,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Normal,,,
where as in the csv file the actual first two lines would have been:
First Name,Middle Name,Last Name,Title,Suffix,Initials,Web Page,Gender,Birthday,Anniversary,Location,Language,Internet Free Busy,Notes,E-mail Address,E-mail 2 Address,E-mail 3 Address,Primary Phone,Home Phone,Home Phone 2,Mobile Phone,Pager,Home Fax,Home Address,Home Street,Home Street 2,Home Street 3,Home Address PO Box,Home City,Home State,Home Postal Code,Home Country,Spouse,Children,Manager's Name,Assistant's Name,Referred By,Company Main Phone,Business Phone,Business Phone 2,Business Fax,Assistant's Phone,Company,Job Title,Department,Office Location,Organizational ID Number,Profession,Account,Business Address,Business Street,Business Street 2,Business Street 3,Business Address PO Box,Business City,Business State,Business Postal Code,Business Country,Other Phone,Other Fax,Other Address,Other Street,Other Street 2,Other Street 3,Other Address PO Box,Other City,Other State,Other Postal Code,Other Country,Callback,Car Phone,ISDN,Radio Phone,TTY/TDD Phone,Telex,User 1,User 2,User 3,User 4,Keywords,Mileage,Hobby,Billing Information,Directory Server,Sensitivity,Priority,Private,Categories
,,,,,,,,,,,,,,[email protected],,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Normal,,,
This has been bugging me for months now

Just the 1st 2 characters.
How do I read at 0 for utc bytes?
think the problem is:
Reads a UTF-8 string from the byte stream. The string is assumed to be prefixed with an unsigned short indicating the length in bytes.
regards
Nikos

SQL Developer 2.1.0.63.73 - Data Migration Not Working Correctly

After migrating the tables and everything, the system attempts to migrate the data but half way through the process the system says data move complete without migrating all the data. The last table i noticed it is trying to migrate contains 55,000 records. Is there a limitation with the data that can be transfered via the tool or could it be a bug in the software?

Not speaking using first-hand information, but people with problems migrating usually have more luck using the offline capture scripts. Can you try those?
Hope that helps,
K.

Format Date function not working correctly

Hi,
I am using the following code to display a system date:
<?xdofx:sysdate('DD-Month-YYYY')?>
However the date always appears as:
18-March -2011 (with space after 'March')
rather than
18-March-2011 (no space after the month)
Can anyone tell me how to get the date to display without the space after the month?
Thanks

Some options:
http://winrichman.blogspot.com/2008/08/xslt-extended-functions.html (right side screen shot)
BI Publisher:formating date using xdofx
Modify the output from current_date

Search by date is not working correctly

If you search for string aggregation in the PL/SQL forum and leave it to default to past 90 days it returns 121 results, if you search for all dates it returns only 14.
This is probably a minor issue since almost no one uses this feature but I thought you might like to know anyway.

Yes, and also one for posting Tuning Requests ;)
edit
And the Mutating Table Error
And storing dates as strings/numbers/anydata
Edited by: hoek on Jul 15, 2010 12:31 AM

Date picker not working correctly.

Similar Messages

Maybe you are looking for