Date picker not working in new DIF R12.1.3

hi,
I've created a date picker as per guidelined in dev guide. but when my doc gets created it's not showing it.
Any help?
Rgds,
Shahnawaz

hi,
I'm able to do this as I chose the validation type JAVA.
Rgds,
Shahnawaz
Edited by: 907938 on Feb 24, 2012 5:22 AM

Similar Messages

Update using date picker not working?

Hello,
This might be simple for a lot of people here but I can't get it going...
The problem is that, I have a tabular form with 1 text field and 1 date field. I am using a PL/SQL anonymous block transaction to insert/update a view based on the field values. Insert is fine but update on the date field is not working - but no errors. The date field is a date picker('DD-MON-YYYY') column. Kindly help check the problem. Thank you.
Below are some codes that might be helpful
-- update statement in the block
update del_ignore_conchold_v
set     conc_prog_name = apex_application.g_f03(v_row)
       ,remove_entry_date = apex_application.g_f04(v_row)
where   row_id = apex_application.g_f02(v_row);
-- update trigger on the view
CREATE OR REPLACE TRIGGER APPS_TEST.del_ignore_conchold_v_upd_tr
   instead of update
   ON APPS_TEST.DEL_IGNORE_CONCHOLD_V referencing new as new old as old
   for each row
begin
   update apps.del_ignore_conchold_tbl@PROD
      set conc_prog_name = :new.conc_prog_name,
          remove_entry_date = :new.remove_entry_date
    where conc_prog_name = :old.conc_prog_name
    and   remove_entry_date = :old.remove_entry_date;
end;Thanks,
Rownald

Hello,
The output for g_f03(v_row) and g_f04(v_row) appear to be fine. g_f03 only has the actual text and g_f04 has the date(from date picker field) with format like 22-OCT-2009. Below is an excerpt of the code & debug log - might be of help.
Thanks as always.
        if apex_application.g_f02(v_row) is not null then
            wwv_flow.debug('MY PROCESS: g_f02 ' || apex_application.g_f02(v_row));
            wwv_flow.debug('MY PROCESS: g_f03 ' || apex_application.g_f03(v_row));
            wwv_flow.debug('MY PROCESS: g_f04 ' || apex_application.g_f04(v_row));
            -- update stmt
            update del_ignore_conchold_v
            set     conc_prog_name = apex_application.g_f03(v_row)
                   ,remove_entry_date = apex_application.g_f04(v_row)
            where   row_id = apex_application.g_f02(v_row);
            wwv_flow.debug('MY PROCESS: g_f03 ' || apex_application.g_f03(v_row));
            wwv_flow.debug('MY PROCESS: g_f04 ' || apex_application.g_f04(v_row));
-- debug log --
0.09: ...Do not run process "AddRows", process point=AFTER_SUBMIT, condition type=, when button pressed=ADD
0.09: ...Process "Save_Transaction": PLSQL (AFTER_SUBMIT) declare v_row binary_integer; begin for i in 1..apex_application.g_f01.count loop v_row := apex_application.g_f01(i); if apex_application.g_f02(v_row) is not null then wwv_flow.debug('MY PROCESS: g_f02 ' || apex_appli
0.09: MY PROCESS: g_f02 AAE2DlAHKAAAA0qAAB
0.10: MY PROCESS: g_f03 Delete data from temporary table
0.10: MY PROCESS: g_f04 22-OCT-2009
0.11: MY PROCESS: g_f03 Delete data from temporary table
0.11: MY PROCESS: g_f04 22-OCT-2009
0.15: ...Process "Reset Pagination": RESET_PAGINATION (AFTER_SUBMIT) reset_pagination
0.15: Branch point: AFTER_PROCESSINGRownald

Date picker not working on quote registration form

I inserted the date picker as a form field in my Quote Registration form. It works in the web forms preview but when I insert it nothing happens. Here is the sample site: http://coopsupport.businesscatalyst.com/
I tried inserting is as HTML and as a module and neither worked. What did I miss?

Hi,
Something in your template is conflicting here once I remove the template the date picker works as normal.
Please note the conflicts can be with a referenced js or jquery in the template. I would check for this unfortunately scripting is outside our support scope however I'll leave this open to the community to offer any additional suggestions.
Kind regards,
-Sidney

Date Picker not working in Crystal XI Developer

Post Author: laksh_hari
CA Forum: Crystal Reports
Hi,
I recently purchased Crystal Reports XI and am running it on Windows Vista.. The Date picker control does not popup for any date parameter fields.. Can you please let me know why it does that and how I can rectify that?

hi,
I'm able to do this as I chose the validation type JAVA.
Rgds,
Shahnawaz
Edited by: 907938 on Feb 24, 2012 5:22 AM

Date picker not working correctly.

Hi all,
I have a strange prob in webdynpro.
I am using Date picker. But once i read it, the value is one day less than that i give.
For eg, i give <b>06/25/2006</b>.. but it reads as <b>06/24/2006</b>.
Please help.
Thanks in advance
gEorgE

Open an OSS message (BC-WD-JAV-RUN).
Armin

Date picker not working in explorer

Hi, I am user explorer for my browsing the Bank website, secured account. I could not select the date from the datepicker, But in other android phone it is possible.
My Nokia lumia 820 is not allowing me to pick the date

Hi Ragu,
The forum is to discuss the problem about HTML, CSS and JavaScript in IE. If your code doesn’t work in IE, please post here. But if it doesn’t work in lumia 820, I recommend you post thread on Windows Phone forum for effective response. Thank you for understanding.
Please refer to the following link.
http://social.msdn.microsoft.com/Forums/wpapps/en-us/home?category=wpapps%2Cwpdev%2Cwindowsphone%2Cwindowsmobile%2Cwindowsphonezh.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

YOUTUBE NOT WORKING ON NEW MACBOOK PRO

YOUTUBE NOT WORKING ON NEW MACBOOK PRO
Every time I want to see videos from youtube the video player just says "your browser does not currently recognize any of the video formats available".
Please help I have everything possible up to date.
Thanks!

It appears as if only some videos on YouTube will play using HTML5 and without Flash. For example, this video plays just fine for me and I do not have flash installed: http://www.youtube.com/watch?v=fxEWddT44BY
So, unfortunately, you will have to install flash or wait for YouTube to fix their website.
Also, one thing to try: When I had Flash installed and the "ClickToPlugin" Safari extension installed, YouTube would load all the movies in a simple HTML5 format. So no annotations or any other annoying stuff. Might be worth trying. You will have to install flash but, with the "ClickToPlugin" extension, you don't have to use Flash.

DOCUMENT SETTING that ALLOW FUTURE POSTING DATE does not work in PL34

Hi Expert,
I am now using SAP B1 2005B (7.40.252) sp:00 pl:34 and realised that the ALLOW Future Posting Date was not working.
I still can remember while I was using pl:11 at B1 2005A, there is no such problem and wish to know when can the bug fix up? in which sp/pl?
Wish to hear goods news ASAP .
Thank you.
Joan.

Basically can you please clarrify your requirement as to what you want to change ..what I understand you would need to change the code for ABAP - RFEBBE00
Value Date code in the above abap
        IF PAR_VALD = 'X'.
          MOVE C2-VALDT TO HLP_VALDT. " VALUE DATE
         write hlp_valdt to umsatz-budat dd/mm/yy.
        ELSE.
          MOVE C8-BALDT TO HLP_BALDT.
          MOVE HLP_BALDT TO HLP_VALDT.
        write hlp_valdt to umsatz-budat dd/mm/yy.
        ENDIF.
           MOVE HLP_VALDT(2) TO UMSATZ-BUDAT.
           MOVE HLP_VALDT2(2) TO UMSATZ-BUDAT3.
           MOVE HLP_VALDT4(2) TO UMSATZ-BUDAT6.
Regards
Anurag
Message was edited by: Anurag Bankley

Headphones not working on new 4s. Any ideas?

Headphones not working on new 4s. Any ideas?

When in system preferences/sound/output do you see the headphones there? If so select them.
Try plugging the headphones in and out several times (there is a micro switch that can get stuck)
Try toggling the volume keys while plugging them in.
Try restarting with them plugged
Trya pram reset: with nothing connected
Power off, power back on holding the following keys:
OPTION COMMAND P R
continue to hold till you hear the start chime 2 times then release, rebbot.
If still no joy take it back to the Apple store, you have 14 days from the date of purchase to swap for another machine, or a refund, or have them fix it. Take full advantage of your warranty.

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

Please check the Play Store app for any Flash updates and install them if present.

Home sharing does not work with new mountain lion update.

home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

HT3917 My apple wireless keyboard is not working after new batteries installed

My apple wireless keyboard is not working after new batteries installed.

Do you get a steady green light to say there is a connection. If not, are the batteries the right way round. Do you have a monitor to tell the batteries strength. Is there a reading. Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.

My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad. I removed /relaoded iTunes and now it won't recognize either iPad or iPhone.

My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad. I removed /relaoded iTunes and now it won't recognize either iPad or iPhone. Got any suggestions?

Hi there Lizabethfromaz,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

LR 5 not working on new Macbook Pro.

LR 5 not working on new Macbook Pro. Have tried 2 CC downloads, 5.6 licensed download and 5.5 licensed download, all result in the same thing. It comes up with basic screen but no panels and gives an error occurred when changing modules. Nothing I've tried seems to help. It also has says "get started with lightroom mobile at top left although it says it is Lr 5.6. Anybody else having problems? Calls to adobe result in no help and have to wait till Monday for some technical support. Surely this should run on a NEW laptop with no other software installed!!!

Install logs were fine. Application installed but wouldn't run properly. Finally got Adobe support and it turns out to be a file permissions error. Had to add both applications and myself as accessors of Lightroom folder under path ~/Library/Adobe/ and set permissions to read & write (was read only for everything but system) and apply to all enclosed folders. Runs fine now. Including this here in case anyone else runs across this issue.

Free busy information not working in new exchange site.

HI,
We have central site Exchange 2010 setup and it working fine . For business requirement we Installed new Exchange server(Mail/CAS/HUB) in new site.
Post installed, Auto discover and mail flow are working fine but Free/busy information is not working for new site mailbox users(Not working in outlook and OWA also).
I am having a strange error coming from outlook. When I run "Test E-mail AutoConfiguration" in Outlook, it comes up with Protocol: Exchange Http "wrong server name"
Please share your suggestion to change/configure "correct server name" in "Protocol: Exchange HTTP"
Protocol: Exchange HTTP
Server: wrong server name
Login name: testuser
SSL: Yes
Mutual Authentication: Yes
Note : ( Protocol: Exchange RPC show correct server information and other Urls (OOF, OAB, OWA, Availability server).)

Hi will martin,
Thanks for your reply..
Yes , I already pointed internal web service virtual directory ( "https://casarrayname/EWS/Exchan...) to CAS server in new site. Other internal URLs (OWA,ECP,OOF,Availability service) also pointed to
new site CAS server.
But , when i check Auto discover internal URI and URL. below is the result.
Result 1
[PS] C:\Windows\system32>Get-AutodiscoverVirtualDirectory -Server Servername
Name
Server InternalUrl
Autodiscover (Default Web Site)
Servername
Result 2
[PS] C:\Windows\system32>Get-ClientAccessServer -Identity servername |fl *internaluri*
AutoDiscoverServiceInternalUri : https://casarrayname/Autodiscover/Autodiscover.xml
When i tried to set interurl using the below command and it completed with no error but still InterURL not reflect.
command : Set-AutodiscoverVirtualDirectory -InternalURL https://casarrayname/Autodiscover/Autodiscover.xml

Date picker not working in new DIF R12.1.3

Similar Messages

Maybe you are looking for