Date selection using inputfield

Hi,
In my WebDynpro application, I have a InputField which I have mapped to the date context element.
When I click on selecting the date...It always points to the current (today's) date. But I want to point to the first day of the month. Please advice me how can I do that? And let me know if I can add background color to that...
Regards,
Umapathi

Hi
Check this thread.Same issue is discussed .
Re: Set date in a date field

Similar Messages

  • Several single value selection in InfoPackage Data selection using Routine

    Hi,
    I am trying to extract data from a table(containing Ticket data) in R/3 using Generic extractor with table. As the table is not supporting the delta functionality i have to do daily full load for more than 5 lak records.
    I dont want all the tickets from R/3, i just need the tickets which are open. Unfortunately there is no field in R/3 table which indicates Ticket status. But in BW i have a DSO where i can get the tickets along with their status.
    Now what i want to do is:
    in the Infopackage i want to give the dataselection for ticket, whose status is open which will be calculated in ABAP code by lookup to the DSO. Is this possible?
    I know that in ABAP routine for Data selection we can give single values and range values. but here i just want to give several single values. That means if suppose i have 4 tickets T1,T2,T3,T4 in the DSO and if T1 and T4 are open tickets, then i have to get the data from R/3 just for T1 and T4.
    in the above case if we use range then the low and high values in the range will be T1 and T4 respectively and the data pulled from R/3 will be from T1 - T4 ie all T1,T2,T3 & T4. but i need just T1 and T4.
    Please share your ideas. also please send the code as i am not an ABAPer.
    If Several single value selection is not possible at least send the code for the range values.
    Thanks,
    Cnu.

    you can write a code like this in the ABAP routine in data selection in front of ticket characteristic
    types: Begin of s_ticket,
         ticket type <type of ticket characterisitcs>,
          End of s_ticket.
    data: l_idx like sy-tabix,
          wa_ticket type s_ticket,
          it_ticket type standard table of s_ticket,
          l_s_range type rsrdrange.
    You can declare
    read table l_t_range with key
         fieldname = '<your field name for ticket>'.
    l_s_range-infoobject = '<infoobject name>'.
    l_s_range-fieldname = '<field name of ticket cahracteristics>'.
    l_s_range-sign = 'I'.
    l_s_range-option = 'EQ'.
    select * from <ODS active table> into table it_ticket where status = <value for open status>.
    if sy-subrc = 0.
         loop at it_ticket into wa-ticket.
              l_s_range-low = wa_ticket-ticket.
              append l_s_range to l_t_range.
         endloop.
    end if.
    p_subrc = 0.
    you need to modify it as per your requirements, i hope this might help you.

  • InfoSpoke data selection using variables in BW 3.5?

    Hi Gang!
    Can InfoSpokes select data using variables in BW 3.5?
    I would like create a "functional" delta process using an Full mode load and a variable to select "yesterday" from a date field. My ETL and external database partners would prefer to not deal with multiple before and after images from a single document item from a ODS. I was hoping I could use a variable selection against a date-time stamp, but I don't see how.
    AM I be forced to use a BADI?
    Thanks,
    John Hawk
    [email protected]

    One crude option would be to add an ABAP step prior to the infospoke execution, in this step code can be added to modify the corresponding record in table RSBSPOKESELSET (for selection values on date/time characteristics).

  • Custom Date Selection

    Hi,
    Can the behaviour of date selection using af:selectInputDate or af:chooseDate be changed?
    We want the user to use af:selectInputDate (or af:chooseDate) to select a date from a list of dates.
    Dates that are not in the provided list should be disabled (i.e., no hyperlink to click).
    Because of the large number of valid dates, we cannot use an af:selectOneChoice.
    Thanks for any ideas!

    Hi,
    "I take it there will also be a way to change the look and feel of disabled dates through CSS? "
    form where do you take this ? I don't see Shay mentioning this. The disabled dates can be skinned, but they don't support overlay images
    Frank

  • Error in Data selection in R/3 Generic Extraction Using function Modules

    Hi Friends,
    I have created a a generic data source using function module to load data from PA0000 and PA0001 Tables ,Function module is working fine when i execute it indipendently and  the data source is also working fine when i extract data using RSA3. it is showing correct no of records 157.
    When loading data into DSO from BW (using 3.x/7.0 flows) data is comming to PSA  all 157 records but in the RSMO the load status is showing yellow when i look into the step by step analysis it is
    data selection successfully started
    Data selection successfully ended
    All Data packets completed.
    are showing in red.
    after and hour time load getting failed and in the error message it is showing " job terminated in source system---> Request set to red"
    it is giving this message wir no RSM 78.
    Please let me know it

    Hi Jerry,
    Thanks for the immediate replay
    But here in my source system job is getting terminated.
    this is the status of job in Job logs.
    the job is running till this step not going ahead.
    Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 157 records 
    Result of customer enhancement: 157 records                             
    Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 301 records     
    Result of customer enhancement: 157 records                             
    Asynchronous send of data package 000001 in task 0002 (1 parallel tasks)
    pl. update me if any idea.

  • Data selection period seems no use in logical DB PCH??

    Hi experts,I have a problem when using LDB PCH.
    There are object selection period fields PCHOBEG and PCHOEND.
    there are also data selection period fields PCHBEGDA and PCHENDDA .
    I set the data selection fields PCHBEGDA & PCHENDDA values at Start-of-selection event.
    But this seems to have no effect on the data selection.
    on GET OBJEC event,all of the infotype data will be got,but not corrosponding to the data selection period.
    Is this normal?or something wrong?Thanks.

    In PCH you have two periods. One for selecting objects and one for selecting data (infotypes).
    LDB PCH works like PNP or PNPCE

  • Extraction problem - selection conditions for data load using abap program

    Hi All,
           I have a problem loading data over a selected period where the selection of date range is done using ABAP routine (type 6). Here though in the request header tab in monitor screen i'm able to see the selection date range populated correctly, no records are being extracted. But if i delete the abap filter and directly give the same date range for selection we are able to extract data. if any body has faced similar problem and have a solution for it please help me with yur suggestion.
    Thanks,
    nithin.

    It seems the the data range is not properly set in the routine.
    You can check the value of selection period generated by routine in the data selection tab-> execute button is there .
    Click it to to test the selection values generated by the ABAP routine..
    If the value here seems correct one then paste the code of the routine that u have written with brief logic details that u have applied.
    Sonal.....

  • Useful data selection abap routines

    Hello Experts,
    Can you advise where I could reference useful abap routines for data selection in infopaks? I desperately need these to help meet specific requirements.
    Thanks,
    Ernest Corvino

    Dear Ernesta,
    Infopackage->DataSelection->After from and to values you see a column called type, write '6' and enter.. it asks for ABAP routine ..
    The following are taken on F1 over there for you..
    In this field you determine the variables for periodic data loading.
    If you want to load the data periodically from the source system into BW, and you want selection field contents (such as date fields) to change periodically, please choose one of the following F4 options:
    For data fields:
    get yesterday
    Yesterday's date is automatically set in the date field.
    get last week
    Last week is automatically set in the date field.
    get last month
    Last month is automatically set in the date field.
    get last quarter
    Last quarter is automatically set in the date field.
    get last year
    Last year is automatically set in the date field.
    free selection
    You can also change other fields periodically as you wish. You can find further information in the documentation under Scheduler.
    Regards,
    Hari

  • Using ABAP routines for data selection

    Hello,
    I want to use ABAP routine to determine value range of data selection in Data Package but when I use routine for one field, selection criterias for other fields are ignored, e.g.:
    in Data Package I have two selection fields:
    CPUDT     Accounting Document Entry Date
    AEDAT     Date of the Last Document Change by Transaction
    For CPUDT I wrote ABAP routine
    and for AEDAT I have just typed in period of time.
    I started data extraction and open Monitor for this Data Package.
    At Header tag I checked selections info and there is selection only for CPUDT.
    Could somebody explain me is it normal system behaviour?
    Thanks
    Andrzej

    Thanks for reply but that would be too easy...
    I have tried your advice but nothing changed.
    I think this is data extraction configuration problem.
    Andrzej

  • Data types used in a sub VI - selecting the correct input and output types?

    data types used in a sub VI - selecting the correct input and output types?
    I can never work out how to choose an input or output format for Subvi's.
    I want to create a SubVI for the code in red. I needs an VI Server Reference compatible input and an output that goes to  a waveform.
    Thanks in advance.
    Attachments:
    data types.PNG ‏11 KB

    GerdW,
    I realise now I have taken us in the wrong direction. apologies for that.
    History, this is not my code and I do not own the process and NOT my preferred method of using it. I was looking for a simple way to make subtle changes.
    What we do - We use these programs to collect data from typically 6 pressures and 6 temperature probes and capture RS232 / USB VISA strings from sensors.
    So every few weeks / months or up to a year we rearrange each sensor location to suit the new process. I did not write the code. I cannot change the procedure too much without resistance.
    So headers in the CSV file have the DaqMX string passed through the code. Great.
    Other data to the CSV file comes from calculations or extracted from the VISA string. Hence why we have headers with "Untitled 1 ()". These values also go to a History Chart.
    So I was looking for a simple way to read the the local variable label as it is always linked to the front page indicator. People can cope with editing the indicator label, save the VI and hit run.
    TL;DR - GerdW is now a psychologist.
    Attachments:
    data to csv and history chart.png ‏1043 KB

  • EC-CS report writer report: what sets to use in general data select/cols?

    I am about to write Report Writer reports using table FIMC. In the rows I will use a set that includes the whole balance sheet structure. What do I put in general data selection or columns? I need to know the ids of the (standard?) sets...

    hi,
    In General Data Selection you have to assign the
    1. Controlling Area or Company Code
    2. Fiscal Year.
    3. From and To Period.
    4. Dr. /Cr Indicators.
    Cheers
    Ranjit

  • Does verizon selects collect data when using wifi ?

    When signing up for verizon selects is states it collects data when using wireless service but does it collect data when using home wifi which is not verizon?

    I'm not sure why one would want to participate in this program but if one is weary about it I for sure wouldn't use it.

  • How to load data into html:select using Struts ?

    How to load data into <html:select> using Struts ?
    I can not load an array or collection (static or dynamic data) into drop down list control by <html:select /> Struts.
    please use:
    <html:select >
    <html:options />
    </html:select >
    Please help me. please detail it. thanks a lot.
    Message was edited by:
    tranminhman

    In order to load a collection or array of data you can use <html:select> with <html: options collection="" name=""/>
    here collection attribute refers to the Arraylist or Array of data and name is the name of the Form bean.
    Hope this helps...
    Chaitanya V

  • Date selection will not print properly when using Microsoft Date and Time Picker Control 6.0 in Excel 2010

    I have created a field input worksheet in which the user identifies start and end dates for training sessions, using the Date and Time Picker Active X Control.  It works fine on-screen, but when the worksheets are printed, the dates that were selected
    using the date picker calendar print out in an unreadable, huge font.  The large font also appears in the print preview mode.  I've tried modifying various properties in design mode, but nothing that I have tried will correct the problem. 
    Any ideas?

    The DTPicker seems to have some bugs in it when used on a worksheet. I have overcome the above by setting the size properties to the same size as a cell and the Linked cell property to the
    cell under the DTPicker. (Even setting the Linked cell had problems with an error message referring to the Check box property to be set to true so I just set it to true and inserted the linked cell and set the checkbox property back to
    false.)
    Then the VBA code below that Hides the DTPicker after a date is selected and unhides the DTPicker when the linked cell with the date is selected. The code is for 2 DTPickers so you will need to edit to suit your requirements.
    Caveat: If the DTPicker is visible then you can't hide it by selecting the same date again. If this occurs then it is a multi step operation. First select another date and the DTPicker will hide, then click on another cell then back on the cell with
    the date to unhide the DTPicker and then select the correct date.
    Hope it helps and feel free to get back to me with any questions etc.
    Private Sub DTPicker1_Change()
        Me.DTPicker1.Visible = False
    End Sub
    Private Sub DTPicker2_Change()
        Me.DTPicker2.Visible = False
    End Sub
    Private Sub Worksheet_SelectionChange(ByVal Target As Range)
        Select Case Target.Address
            Case "$E$5"     'This is the linked cell for DTPicker1
                Me.DTPicker1.Visible = True
            Case "$E$13"    'This is the linked cell for DTPicker2
                Me.DTPicker2.Visible = True
        End Select
    End Sub
    Regards, OssieMac

  • Date selection and search help component in jsp

    Hi all:
        In sap portal jsp development enviorment, is it possible to easily program the date selection and search help ( just look like search help in webdynpro ) ?

    Hello Jianhong,
    the easiest way to set a value help is using HTMLB component in your JSP.
    To do it, use next code:
    <hbj:inputField
               id="DateInputField"
               type="date"
               showHelp="TRUE"
               ... other attributes
    />
    Before using HTMLB components in your JSP, don't forget to add this line to your page:
    <%@ taglib uri= "tagLib" prefix="hbj" %>
    regards.
    mz

Maybe you are looking for