DateFormat can not format

i use arabic calendar of icu , pattern of date : yyyy , MMMM d , EEEE
when locale of DateFormat set to arabic or persian , date append in stringBuffer correctly but
display incorrectly : yyyy, EEEE, d MMMM
please help me.
it must چهارشنبه , ۷ بهمن , ۱۳۸۳ but display ۱۳۸۳ , بهمن ۷ , چهارشنبه
please help me...............000

instead yyyy , MMMM d , EEEE , i see output in yyyy EEEE, d MMMM
my code :
Locale[] locales = DateFormat.getAvailableLocales();
Date time = Calendar.getInstance().getTime();
for (int i = 0; i < locales.length; i++) {
      DateFormat df = DateFormat.getDateInstance(FULL , locales);
textArea.append(locales[i].getDisplayName() + " : " +df.format(time));
textArea.append("\n");

Similar Messages

  • Can not format my SanDisk Extreme Pro SDXC card using Disk Utility

    Hello!
    So, I have a problem with my SD cards.
    I have an 27" iMac where I can read, write or format my SDXC SanDisk Extreme Pro cards for fun.
    As soon as I insert them into my MB Pro, I lose that capability. I can only read them.
    The option for format the cards gets greyed out.
    I must get them working on my MB Pro since I am leaving in a week with my camera and laptop and absolutely have to be able to format the cards in the laptop, since I own a Blackmagic Pocket Cinema Camera where that is not an option in the camera.
    I have OSX 10.9.5 on both computers.
    There does not seem to be a problem with other external drives that I own. My Western Digital Passport can be formatted, read and written on my MB Pro.
    What do you guys think?
    Regards,
    Atli

    I have found a little workaround for this stupid thing.
    If you remove your SD card and then log out of your account. Then in again, insert the card, open disk utility and then everything should be okay!
    Worked for me on both SD cards, but I have to do this every time I want to format a SD card.

  • My Canon T2i gives message "card can not be accessed" when I turn on camera.

    My Canon T2i gives message "card can not be accessed" when I turn on camera. Can not format with camera. New memory card does not help. How can I get my camera to work? 

    Hi delphinus!
    Thanks for posting.
    What specific memory cards have you tried?  When was the camera purchased?
    If this is a time sensitive-matter, additional support options are available at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Video taken and transferred to my macbook pro can not be viewed-it is in AVI and jpg format what can I do

    I have video taken on a flip camera and transferred to my MacBook Pro. the files are in AVI format when I click on them to view they turn to jpg. I can not view them.

    Get this:
    http://www.videolan.org/vlc/download-macosx.html

  • I recently purchase a tv episode from the iTunes store, however, can not download to my IPOD Touch.  Apparently, a format issue, any suggestions

    I recently purchased a tv episode from the iTunes store.  However, I can not get the tv episode downloaded to my IPOD Touch i.e. can not sync movie although music works fine.  From what I read it is an issue with the format of the episode.  The format is HD and apparently is too much for my IPOD touch.  According to the documentation, the SD format for the episode should have been downloaded at the same time as the HD.  I have the latest iOS for my IPOD Touch, 4.2.1 and latest for ITunes 10.5.3.3.  I am using my PC with Windows 7.  I can not download directly to the IPOD Touch since access to the clous is required i.e. iOS 4.3 or higher.  Any suggestions? 

    My suggestion is for you to do the downloads overnight.   

  • Can not open a report in XLTX format

    I have created several BPC reports and save them in XLTX format,  one of them can not be opened with the following message "Excel cannot open file because the file  format or extension is not valid," anybody has this kind experience and know hot to fix it?

    Jianbai,
    Known issues with BPC and Office Excel 2007 and opening with 2003.
    You might want to check a client machine where this occurs to see if they still have excel 2003 installed also with Excel 2007
    There is a Work around you can try: We recommend installing the office compatibility pack via the following URL:
    http://www.microsoft.com/downloads/details.aspx?FamilyId=941b3470-3ae9-4aee-8f43-c6bb74cd1466&displaylang=en
    a) Install 'Compatibility Pack for the 2007 Office system' file on
        client machine which has Office 2003.
    b) Change file extension 'xls' or 'xlt' to 'xlsx'.
    c) Open template.
    Note: Please be careful with the file format while saving it from Excel 2007. Even though the file extension is xls, it doesn't mean the format is really 2003 compatible.
    Let me know if this help resolve this issue.
    Thanks,
    Sharon
    BPC-NW Engineer

  • I downloaded music to my ipod (4th gen) from my computer but it was mp3 format.  It shows that the music is in there but I can not play it.  It seems to  be in there as a file but not as music.

    I downloaded music from my computer to my ipod (4th gen) but I can not listen to it. It shows that it is on there as files but not music is this because the music was format for a mp3.  How do I convert it to play on the ipod or move it to the music file?

    The iPod can play MP3 files, so that's not the problem.
    It sounds like you're accessing the iPod as a disk drive, and copying files in Windows Explorer.
    This is not the way to put music on your iPod. You have to install iTunes on your computer, and put your music in iTunes. Then you can use iTunes to select the music you want on your iPod.

  • Pages is not saving document correctly.  After saving the changes either do not appear or you can not open the file. The error is "not a valid format"  I am in Pages '09 4.1 (923).  I also use Parallels.  Anyone having similar issues?

    Pages is not saving document correctly.  After saving the changes either do not appear or you can not open the file. The error is "not a valid format"  I am in Pages '09 4.1 (923).  I also use Parallels.  Anyone having similar issues?

    I'm not sure that Lion AutoSave feature apply to network servers.
    I'm just sure that the Versions feature doesn't.
    Yvan KOENIG (VALLAURIS, France) samedi 21 janvier 2012
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My Box account  is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
    My iDisk is : http://public.me.com/koenigyvan

  • I have payed for Adobe acrobat pro but now i can not convert a pdf document to a word format, why?

    I have payed for Adobe acrobat pro for one year and it is valid to november 2015, but now i can not convert a pdf document to a word format, why ?

    Hi m_karhulinna,
    If you have Acrobat Pro, you can save directly to Word format from within Acrobat by choosing File > Save as Other > Microsoft Word > Word Document.
    (It sounds like you may be trying to use the ExportPDF online service, which is separate from Acrobat, and not necessary in your case.)
    Best,
    Sara

  • I am trying to upload a pdf i created to an online system but am getting an error message indicating that my document is not formatted to 8.5x11. How can i get my document to 8.5x11

    I am trying to upload a pdf i created to an online system but am getting an error message indicating that my document is not formatted to 8.5x11. How can i get my document to 8.5x11

    You'll want to fix this via the online system you used to create the PDF.
    If all content mastering and page configuration is done online then that is where you must make a correction to what you did before.
    If a file is uploaded to the online system for processing then you must revisit that file.
    Open the file with its native application and correct page size there.
    If you upload a scanned image to the online system you must configure the scanner software to output the needed page size.
    Be well...

  • Camera RAW 8.7.1 installed and PS says it can not hanle the format, but my camera is Canon EOC 60D, on the list. How can i fix this?

    Have installed Camera RAW 8.7.1 and PS says it can not hanle the format, but my camera is Canon EOC 60D, on the list. How can i fix this?

    If you use menu File>Open As and in the open dialog use the type pulldown select camera raw then select a  jpeg image when ACR opens do you see 8.7.1 in ACR window frame ?
    The Canon support ACR  EOS not EOC right.  What version of Photoshop are you using only CS6, CC and CC2014  can use ACR 8.7.1.
    EOS 60D
    CR2
    6.2
    3.2
    EOS 60Da
    CR2
    7.1
    4.1

  • Please help!! Pages 09 :: Pages Files Can not be read - The Document Does Not Have A Valid Format

    I used pages to write my coursework, but when I saved it, pages crashed...
    Now I tried to reopen the file. It shows "The document ___.pages can not be read - The Document Does Not Have A Valid Format".
    I've looked through the forum to find any fix methond.  I tried the "zip solution" -> changes the file entention as .zip file.
    But the still can not solve my problem. it shows the zip file can not be open..
    I put my files in the following link.
    http://dl.dropbox.com/u/16476040/Marketing%20Coursework.pages
    Please could anyone try to offer me assistance. bacause it is very urgent.
    I will be very grateful if anyone can help me.

    Hi, Peter
    I followed the instriction, and changed to root to locate /.DocumentRevisions-V100/
    I can see several ______.pages file under the ./DocumentRevisions-V100/PerUID/
    From the "Date Modified" attribute, I can find several __.Pages files that what I want.
    But unfortunately, when I tried to open these version files, it still shows
    The document can not be read. The Document does not have a valid format....

  • HT4718 No 1.    I can not activate Filevault : FileVault can't be turned on for the disk "Macintosh HD". Some disk formats don't support the recovery partition required by encryption. To use encryption, reinstall this version of Mac OS X on a reformatted

    I have TWO PROBLEMS
    No 1.  I can not activate FileVault. It displyas as follows :
    FileVault can’t be turned on for the disk “Macintosh HD”.
    Some disk formats don’t support the recovery partition required by encryption. To use encryption, reinstall this version of Mac OS X on a reformatted disk.
    No 2. I can not activate Find My Mac service. It displays as follows :
    Find My Mac requires a recovery partition
    Some configurations, such as software or hardware RAID, do not support a recovery partition and can't be used with find my mac

    Restart holding down the option/alt key and see if you have a Recovery Volume.
    Recovery Partition – Recreate Without Reinstalling
    Recovery Partition – Recreate Without Reinstalling (Requires Installer)
    Recovery Drive – Restore Missing
    Recovery Disk Assistant

  • I can not open email attachment which is sent from a swann dvr using apple mail since i upgraded to Yosemite ,has anyone got a fix ? the file format is _mnt_tmp_

    i can not open email attachment which is sent from a swann dvr using apple mail since i upgraded to Yosemite ,has anyone got a fix ? the file format is _mnt_tmp_

    Oh no... NOT THE 99-PAGER!!! Anything but THAT!!!

  • I have a Nikon D810, I have a trial version Ligtroom 5 and I can not open NEF format, help me please.

    I have nikon D810 , i can not open Nef format .

    LR 5.6 is needed, and your destination needs to be writable by LR, and you cannot have touched the files with Nikon software that is old, like what you might have used with your previous Nikon camera, to transfer or view the images before importing into LR.
    Obsolete Nikon software changes something in the metadata of newer-camera NEFs that makes the raw files unrecognizable to Adobe software.  You can correct the corruption with a utility from here:
    http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html

Maybe you are looking for

  • IPod Classic - ok with Windows, not with iTunes

    Hi, I have a Classic 160GO iPod. Suddenly this problem appeared : - no music or pictures were recognized by my iPod, but the disk space was used for "Other" - this iPod is not known with iTunes - This iPod is known as a removable hard disk, via Windo

  • HP AIO 1315 Printer w/ Airport Express

    Before I buy the Airport Express, is there ANYONE who has gotten this HP all in one to print wirelessly from a Macbook or ibook. If so, can you tell me how, & what drivers? Cups? Thanx, my Mac bros.!

  • XSI RAW to Aperture via DNG

    I have a question concerning the Adobe DNG Converter. I would like to use it as long as there is no Xsi support in Aperture. In the Converter preferences there is an option to "embed original". Can I safely use it for imports into AP and delete the o

  • Nokia n95 8gp does not recognize the Kabiotran thr...

    Hey friends.. i have nokia N95 8GB device and my pc has windows 7 with 7 and fully updated version. I was getting the same message and them iuninstalled the driver and pc suite. after words the driver again showed a yellow dot and my divice was not c

  • I need a report of PS Text assigned to Project Definition or WBS Elements.

    Dear Friend's I need a report of PS Text assigned to Project Definition or WBS Elements. By putting Project Definition or WBS Elements i must get all PS Text & print option is also required. How i can do this in PS module. Regard's Sandeep