Daylight saving error on E61i in Australia

This year daylight saving in many parts of Australia finishes a week later than usual. My PC and Outlook understood, but my E61i went back an hour. I cannot find any settings in the phone or doco which can influence how the phone reacts to daylight saving.
The issue is not just the time. Most (curiously, not all) of my timed calendar entries in the intervening week have also gone an hour earlier. They are fine before the week, and after the proper changeover. If I manually change the phone's time, the calendar entries stay wrong.
What do I do? I see references to firmware (?!) changes for other models (including E61). My software level is 2.0633.65.01.

Given that the week is now over and your phone and PC should both have reverted to EST, not EDT, this problem should now have passed.
This problem should have been corrected with a firmware upgrade but the e61 hasn't had a firmware upgrade for over a year...
This year I just ignored it as the actual reminders were still happening at the right moment of the day! As it was synchronising via Mail for Exchange all was fine, as the PC was dominant.
The only other work around is to set the phone to another time zone that was correct for the week while this schemozzle lasted.
Hopeless, wasn't it? It is up to the Australian government to gazette calendars for Australia not Nokia! Nokia should have an appropriate mechanism in place to check for adjustments to time zone etc information.

Similar Messages

Daylight saving error ...

can anyone explian me what exactly is this erro
"daylight saving error "
regards
Snigdha

Hi Snigdha,
You can find the relevant info here:
Daylight Saving Patch for March
Hope this helps...

Daylight saving error in Calendar application

A notice for concerned users:
When an event is scheduled on iCal v. 3.0.1 (i.e. on a Leopard iMac) with a time zone of "UTC", it does not display with the proper event time when viewing the event on the iPhone Calendar application if the daylight saving setting of the day of the event is different from the current daylight saving setting for today.
Example: I am located in the Central time zone (i.e. Chicago). If I schedule an event for 10:00 p.m. UTC on March 10 (the day after daylight saving time begins), then review the event in Calender prior to March 9, the iPhone will display the event for 4:00 p.m. (which is it's time in CST) instead of correct time of 5:00 p.m. (which is it's time in CDT).
In other words, displayed times for future events are calculated using today's daylight saving setting instead of the daylight saving setting of the date of the event.

Given that the week is now over and your phone and PC should both have reverted to EST, not EDT, this problem should now have passed.
This problem should have been corrected with a firmware upgrade but the e61 hasn't had a firmware upgrade for over a year...
This year I just ignored it as the actual reminders were still happening at the right moment of the day! As it was synchronising via Mail for Exchange all was fine, as the PC was dominant.
The only other work around is to set the phone to another time zone that was correct for the week while this schemozzle lasted.
Hopeless, wasn't it? It is up to the Australian government to gazette calendars for Australia not Nokia! Nokia should have an appropriate mechanism in place to check for adjustments to time zone etc information.

When there is no daylight saving, i am facing an error

Hello , I have created an add in for outlook, we setup meeting rooms, we
opened mailbox for each meeting room. Users are using Outlook 2010. We can now see all meeting rooms in our calender. And we are able to set up meetings with corresponding meeting rooms. The only issue I need to fix is that : When someone organize a meeting
in with other countries; as Australia, France, Korea , China.. some of these countries don't have daylight saving and when changing my local machine time to korea for example, it gives me an error.
This is a part of the code where getting the timeZone , plz help me to know what to change for coutries that don't have daylight saving.
// Make the request.
GetUserAvailabilityRequestType request = new GetUserAvailabilityRequestType();
// Get the local time zone
TimeZoneInfo zone = TimeZoneInfo.Local;
TimeZoneInfo.AdjustmentRule[] adjustmentRules = zone.GetAdjustmentRules();
string str_offset = "";
TimeZoneInfo.ClearCachedData();
TimeSpan offset = TimeZoneInfo.Local.BaseUtcOffset;
if (offset.ToString().Substring(0, 1).Equals("-"))
str_offset = offset.ToString().Substring(0, 3);
else
str_offset = offset.ToString().Substring(0, 2);
// Set the time zone of the request.
request.TimeZone = new SerializableTimeZone();
//TimeZoneInfo.BaseUtcOffset Property
//Gets the time difference between the current time zone's standard time and Coordinated Universal Time (UTC).
request.TimeZone.Bias = (int)TimeZoneInfo.Local.BaseUtcOffset.Negate().TotalMinutes;
for (int iAdjustment = 0; iAdjustment < adjustmentRules.Length; iAdjustment++)
if (DateTime.Now >= adjustmentRules[iAdjustment].DateStart && DateTime.Now <= adjustmentRules[iAdjustment].DateEnd)
request.TimeZone.StandardTime = new SerializableTimeZoneTime();
request.TimeZone.StandardTime.Bias = 0;
request.TimeZone.StandardTime.DayOfWeek = adjustmentRules[iAdjustment].DaylightTransitionEnd.DayOfWeek.ToString();
request.TimeZone.StandardTime.DayOrder = (short)adjustmentRules[iAdjustment].DaylightTransitionEnd.Week;
request.TimeZone.StandardTime.Month = (short)adjustmentRules[iAdjustment].DaylightTransitionEnd.Month;
request.TimeZone.StandardTime.Time = adjustmentRules[iAdjustment].DaylightTransitionEnd.TimeOfDay.ToString("HH:mm:ss");
request.TimeZone.DaylightTime = new SerializableTimeZoneTime();
//TimeZoneInfo.AdjustmentRule.DaylightDelta Property
//Gets the amount of time that is required to form the time zone's daylight saving time. This amount of time is added to the time zone's offset from
Coordinated Universal Time (UTC).
request.TimeZone.DaylightTime.Bias = (int)adjustmentRules[iAdjustment].DaylightDelta.Negate().TotalMinutes;
request.TimeZone.DaylightTime.DayOfWeek = adjustmentRules[iAdjustment].DaylightTransitionStart.DayOfWeek.ToString();
request.TimeZone.DaylightTime.DayOrder = (short)adjustmentRules[iAdjustment].DaylightTransitionStart.Week;
request.TimeZone.DaylightTime.Month = (short)adjustmentRules[iAdjustment].DaylightTransitionStart.Month;
request.TimeZone.DaylightTime.Time = adjustmentRules[iAdjustment].DaylightTransitionStart.TimeOfDay.ToString("HH:mm:ss");
// Add the mailboxes to the request.
request.MailboxDataArray = mailboxes;
// Add the free/busy view options to the request.
request.FreeBusyViewOptions = fbViewOptions;
DateTime startExchange = DateTime.Now;
// Send the request and get the response.
GetUserAvailabilityResponseType response = esb.GetUserAvailability(request);
DateTime endExchange = DateTime.Now;
TimeSpan timeWSE2010 = endExchange - startExchange;
CLogger.WriteLog(ELogLevel.INFO, "getListRoomsExchange2010 -timeWSE2010-WS=" + timeWSE2010.ToString());
// Access free/busy information.
if (response.FreeBusyResponseArray.Length < 1)
MessageBox.Show("An error occurred while getting the available rooms - No free/busy response data available.", "Pick A Room");
CLogger.WriteLog(ELogLevel.ERROR, "GetUserAvailability - An error occurred while getting the available rooms - No free/busy response data available.");
else
for (int j = 0; j < response.FreeBusyResponseArray.Length; j++)
FreeBusyResponseType fbrt = response.FreeBusyResponseArray[j];
if (fbrt.ResponseMessage.ResponseClass == ResponseClassType.Error)
Console.WriteLine(string.Format("Error: {0}", fbrt.ResponseMessage.MessageText));
else
//Get the free/busy data
FreeBusyView fbv = fbrt.FreeBusyView;
if (!fbv.MergedFreeBusy.Contains("2") && !mailboxes[j].Email.Address.ToString().Equals(""))
availableUsers = availableUsers + ThisAddIn.dictionaryRooms[mailboxes[j].Email.Address.ToString()] + ";";
catch (Exception ex)
//Error processing.
MessageBox.Show("An error occurred while getting the available rooms - Exception:" + ex.Message, "Pick A Room");
CLogger.WriteLog(ELogLevel.ERROR, "getUserAvailability - An error occurred while getting the available rooms - Exception:" + ex.Message);
return availableUsers;

Hi,
Please post the detailed error message, it’s more helpful for further troubleshooting.
Since the add-in is related to Outlook client, I recommend contact Outlook for Developers Team so that you can get more professional suggestion.
For your convenience:
https://social.msdn.microsoft.com/Forums/en-US/home?forum=outlookdev&filter=alltypes&brandIgnore=True&sort=relevancedesc&filter=alltypes&searchTerm=
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Daylight saving time causes a date error on 01/APR

morning dears,
we are facing an issue related to Daylight saving time, as the following:
at any page on the system that contains a calendar if we choose the date 01/04/2012 it generate an error...
example on this error :
on Leave Request page --> when choosing 01/04/2012 then clicking on calculate duration-->
01/04/2012 is not a valid date. Please re-enter.
any suggestions??

dears any suggestions to solve the issue??
have anyone faced this before?

Switch to standard time from daylight saving causes error - iOS 7

Hi there,
Today (27-Oct-2013) the time was switched back from daylight saving to standard. When looking my iPhone, I noticed that although the clock correctly displays the current time, the standard weather app still uses the time according to daylight saving (i.e. showing one hour ahead) and what is more interesting, the calendar acts weirdly, showing the correct time, but placing it in the old daylight saving time, i.e. 7:46 AM is shown as a line between 8:00 AM and 9:00 AM! It is really ridiculous and it seems I cannot change these. I restarted my iphone, turned off and on again using carrier provided time, but nothing changed. Any clues?
Using iPhone 5 and iOS 7.0.2.
Any help is appreciated.

Problems with time, time zones have been quite common. Clearly, my brand new, the most forward thinking smartphone has the same bug. Sometimes I wonder why Apple is unable to get basic things work? they simply don't care, that's all.
Issue with the line materializes itself on my iCal on iMac as well
I hope, at least alarm will go off at the right time Monday morning
BTW: last year when I was on trip to Chile, at one night - suddenly - out of the blue - time changed on all our apple devices.. it's bad when you've got your flight next day and don't know when to wake up weeks later I have found out information Apple did not update their list of timezone changing dates.. for couple of years...

Date Time in Coldfusion at Daylight Saving

Hi
In coldfusion, I have problem creating Date Time using CreateDateTime when the daylight saving switch. For example
CreateDateTime(2011,3,13,2,0,0) gives error.
Also if you do like this
DateAdd('h',1,CreateDateTime(2011,3,13,1,0,0)) gives "2011,3,13,3,0,0" ie instead of 2AM it returns 3AM. This is happening every daylight saving switch time.
This is a bug in coldfusion?
It should be fixed by Coldfusion.
Thanks

On 3/17/2011 12:39 AM, Paresh_Patel said:
>
When we loop through the 24 hours on daylight saving day e.g
>
<cfset startDate = CreateDateTime(2011,3,13,0,0,0)>
>
<cfoutput>
<cfloop from="1" to="22" index="dayNo">
<cfset startDate = dateAdd('h', 1, startDate)>
#hour(startDate)#<br>
</cfloop>
</cfoutput>
>
This will show wrong hours (2 is missing)
and that means you've fallen into timezone hell.

IPhone + Outlook, recurring meetings not adjusted for Daylight Saving (Arizona)

Anybody else out there living in Phoenix and syncing with Outlook?
I have an iPhone 4 running iOS 5.0.1 and I sync my calendar with Outlook 2007 running on Windows XP. Recurring meetings that were sent from another timezone are not showing the correct time following the Daylight Saving Time (DST) change on Nov. 6.
For example, I have a recurring meeting for Tuesdays that was originally sent to me July 26, 2011 (during DST, that is) by my customer in California. In Outlook the time is shown as 8:00 AM Pacific Time. During DST this meeting was shown correctly in Calendar as 8:00AM. Today it still shows as 8:00 but should show as 9:00 (8:00 PST = 9:00 MST).
Phone Settings: My iPhone's time zone was originally set this morning to "Set Automatically ON" and it had selected Denver although I'm in Phoenix. I understand that Denver and Phoenix now share the same time. I turned "Set Automatically" off and selected "Phoenix, U.S.A." then resynced, but the appoinment above still shows 8:00.
So how do I fix this? I really don't want my customer to have to resend the invite just to fix an iOS bug.

Not sure if people are still looking at this post, but we did finally find a fix for the issue.
In the end we figured out that one of our exchange mail box users had something faulty in their profile. By "faulty", our exchange admins attempted to move the user's mail profile from one mail store to another, but exchange returned errors when attempting to do so.
In order to "fix" the issue we ended up deleting the mail profile completely from exchange and then recreating it from scratch - scary prospect when having to do this with someone high up the food chain... (prior export and reimport essential otherwise all data is lost)
(the user dealt with many meetings for multiple staff, and was a common factor between all users getting the issue)
I wouldn't call this specifically a MS issue as prior to ipad/iphones, these issues did not occur, and even while it was occuring, turning off mail on ipad/iphones meant the issue did not occur and other email clients had no issues at all
- so it looks like something in the iphone is not quite robust enough to be able to handle a few errors
(alternative theory: perhaps it is the iphone that created the issue in the first place??? We don't know when the issue with the actual mail account started and not enough resources to trowel through log files looking for a needle in a haystack)
Anyway, not sure if this will help everyone with the same issue, but thought I'd share our experience

Nokia N8 Daylight Saving Clock Issue

I have discovered a issue with the clock on my Nokia N8 following the commencement of daylight saving here in Melbourne Australia.
My device is set to "Automatic time update" & yesterday it adjusted the time for daylight saving by 2 hours instead of 1. It is now one hour fast.
I have a feeling there may have something to do the phone confusing UK time for GMT time (UK still in daylight saving time to my knowledge).
Anyone else have this issue?

Mine is working fine, I changed from Brisbane to Melbourne, only moved forward an hour with automatic time update on.
I'm using Belle though, perhaps when you get the Anna update it shall fix it.
For now you might have to just turn the automatic updates off

Rich: calendar problem when automatically adjust clock for daylight saving

Hello, I'm in trouble when the option to automatically adjust clock for daylight saving time is marked. My locale is pt_BR, and when I try to select the day it simply returns to 17.10.2010 on 16.10.2010 took the test in the following component and realized that the same problem occurs when the Windows clock option is selected .
http://livedemo.exadel.com/richfaces-demo/richfaces/calendar.jsf?tab=usage&cid=15374785
I also noticed that this problem occurs in all components of the JSF schedule, no matter what the distribution
http://www.primefaces.org:8080/prime-showcase/ui/calendarDisplay.jsf
Question is, how to make the jsf solve this problem without having to uncheck the Windows clock?
See below for the following attempts to try to fix the problem:
faces-config.xml file
    <locale-config>
         <default-locale> en </ default-locale>
         <supported-locale> en_US </ supported-locale>
         <supported-locale> of </ supported-locale>
         <supported-locale> fr </ supported-locale>
        <supported-locale> es </ supported-locale>
        <default-time-zone-id> Brazil / East </ default-time-zone-id>
    </locale-config>
{code}
Created file DateTimeZoneConverter
{code:java}
import java.util.SimpleTimeZone;
import javax.faces.convert.DateTimeConverter;
public class extends DateTimeZoneConverter DateTimeConverter {
     public DateTimeZoneConverter () {
        super ();
        SimpleTimeZone stz = new SimpleTimeZone (7200000, "Brazil/East");
        this.setTimeZone (stz);
{code}
In the example above I'm forcing the useDaylight is false.
In component:
{code:java}
<rich:calendar id = "periodoVigencia" enableManualInput = "true" datePattern = "dd / MM / yyyy" inputSize = "10"
           value = "# () contratoMBeanList.criteria.dataInicioVigencia"
           label = "# (msg ['contrato.consultarContrato.field.periodovigencia.label'])">
           <f:convertDateTime pattern="dd/MM/yyyy" type="date" dateStyle="short" timeZone="GMT-3"/>
</rich:calendar>
{code}
and in the web.xml file
{code:java}
<context-param>
     <param-name> timezone </ param-name>
      <param-value> GMT-3 </ param-value>
</context-param>
{code}
But nothing worked. And now what do I do? How to fix this problem, there are some more configuration to be done? Help, please!
P.S.:Apologize for my english, I'm Brazilian.

Like I said, were attempts to resolve the error.
OK, now how to solve this problem? Try the test in your area by selecting the day that DST occurs, you will see what will happen the same problem (to select the day that DST occurs on the screen will return one day less), do the test with the demos that I put in the first post, rich: calendar and prime: calendar.
I do not know if it helps, but I noticed the firebug firefox debugging, it does not matter the way you change the locale or timezone, as the current date from the calendar javascript will always be the standard of the machine running the component.

Daylight Saving Changes 2007

Hi, I am using new_time() function in my code which takes timezone abbreviations like (PST, CST) to convet time from one timezone to other. As a part of DST changes in March 2007, do we also need to change this function to use abbreviations other than this?
I tried doing this, but it returns an error.
Can anybody help out...

Have you gone through this doc in metalink? Doc ID: Note:359145.1
Subject: Impact of 2007 USA daylight saving changes on the Oracle database

Daylight saving and Outlook

I have an E51 and live in Darwin, Northern Territory.
There is no timezone for Darwin provided by Nokia, just Adelaide, also on Central Standard Time.
Now Adelaide has moved to dalight saving; Northern Territory time does not change.
I can correct the time manually on my phone but all my appointments from Outlook are on Adelaide time on my phone, Darwin time in Outlook on my PC.
Any ideas?

I am in Darwin also but I am on a network so my computer time has to remain as is. Nokia can handle daylight saving for Adelaiude but has not yet developed the software to enable the networks to recignose that the NT does not have daylight saving.
Keep complaining, folks - that makes it more likely that something will be done about the issue.
I sent the following to the local paper - which may or may not publish it:
"I wonder how many other people in the NT share my current frustration?
If I synchronise my computer calendar with my mobile phone now that SA is on daylight saving, all my appointments are I hour out as they are on Adelaide time.
After frustrating email correspondence with Nokia and phone conversations with multiple people at Telstra (who provided my Nokia phone) I am being told that it is a network problem.
My computer recognises my time zone as GMT+0930 (Darwin) but my mobile phone only offers time zones for Adelaide, Brisbane, Canberra, Melbourne Perth and Sydney (and can adjust to their daylight saving regime). However I am told that software is not yet developed to enable those of us who do not share the SA daylight saving period to remain on true local time.
Curiously enough earlier models of mobile phones apparently did not have this difficulty, nor do all current models. If you do not try to synchronise all will be well as long as you adjust the actual time read out on your phone. Synchronising is, however, impossible!
If anyone has a solution or can persuade Nokia and other mobile phone manufacturers to ensure that all their models can be on correct local time anywhere in Australia you will be doing a significant service!"

No daylight-saving time auto-adjust?

Using a Lumia 800 in the UK and (believe it or not) only just realised that it hasn't auto-corrected for daylight-saving time. Can't see an option for it either - am I just missing a really obvious setting somewhere? Time/date has many place options but no DST - is that correct?
Solved!
Go to Solution.

I think my experience may help.
I have had hours and hours of frustration with syncing my phone with Outlook calendar because of the way the date and time settings are described on my Nokia phone.
My Timezone is GMT+10 regardless of whether my location is currently in Daylight Saving. The automatic Daylight Saving settings on my computer adjust the time setting by plus 1 hour when Daylight Saving starts.
On the phone, however, setting the time works in a totally weird way. To get the right time on calendar events synced from my computer, I have to set up the phone according to the actual GMT time difference on the day I do the settings. Right now I'm in Daylight Saving so I have to put my Timezone as GMT+11. If I was doing the settings in mid-winter I would have to set the Timezone as GMT+10.
I just discovered this solution today! What a relief. My calendar events now appear at the same time on my phone as on the computer!
However, the whole Nokia time setup arrangement is quite incorrect and that explains the extremely long sequence of complaints on these discussion pages - going back to at least 2004.
It's very straightforward. My Timezone is GMT+10: it's GMT+10 in midsummer and it's GMT+10 in midwinter. A Daylight Saving adjustment doesn't ever change anyone's Timezone.
If Nokia used the correct meaning of Timezone, no-one would be having any problems with syncing events from their computer to their phone.
I have contacted Nokia separately about their serious error in misunderstanding the meaning of Timezone.

Doc. saved(error in account determination)

Dear gurus,
I have done an order-delivery-pgi-billing, but the error, document-----saved(error in account determination) is given, what do i do?
Tanx
Maureen

Dear Maureen,
Open your billing document and go to Environment - Acct. Determination Analysis - Revenue accout.
Check over there wheather ny account is determined by the system or not.
if not then go to IMG - Sales and distribution - Basic Function - Account Assignment/Costing - Revenue Account Determination - Assign G/L Account
Click on the General then assign your G/L account with the combination of chart of account and sales organistion.
Hope so this will solve your problem.
Keep me updated.
Suneet Prakash.

Error for Billing Document- saved(Error in account determination)

Dear all,
When i am trying to creat the billing document , it is saving with error in account .
Can any body tell me the reason for this error.Actually i have maintained the required GL accounts in VKOA.
9011000024 000000 Document 9011000024 saved (error in account determination)
    Technical data
    Tech. data details
     Client
     Group Number
     Sales Document Number                  9011000024
     Item Number of the SD Document      000000
     Schedule Line Number                      0051
     Counter in Control Tables                  00
     Message Identification                      VF
     System Message Number                 051
     Output Type                                     E
     Message Variable 01                    9011000024
     Message Variable 02
     Message Variable 03
     Message Variable 04
     Group Type
Thanks In Advance
Parag

Hi
Put the billing doc in change mode and then enter
From the top menu bar-environment-account determination analysis---revenue account determination
If you explore that system will give some hint of what is missing?
Check in CMR whether account assignment category is mainatained in Billing tab of sales area data
Check in MMR whether account assignment category is mainatained in sales org data2 tab
Ensure that VKOA settings are correct?
Then go VF02 and click on the green flag in the initial screen or shift+F4
All the best
Regards
raja

Daylight saving error on E61i in Australia

Similar Messages

Maybe you are looking for