DB adapter polling error

Dear All,
I am getting below error while polling from a SQL Server DB
Database Adapter PROTEST <oracle.tip.adapter.db.InboundWork handleException> Encountered a fatal exception while polling. Will continue polling but with minimal logging. Please investigate the fault and manually stop polling from the console if in development and this appears to be a modeling mistake. BINDING.JCA-11624
Supplemental Detail DBActivationSpec Polling Exception.
Query name: [PROTESTSelect], Descriptor name: [PROTEST.Mes2Otcmessage]. Polling the database for events failed on this iteration.
Caused by java.sql.SQLSyntaxErrorException: [FMWGEN][SQLServer JDBC Driver][SQLServer]Invalid object name 'MES2OTCMessage'..
This exception is considered not retriable, likely due to a modelling mistake. To classify it as retriable instead add property nonRetriableErrorCodes with value "-208" to your deployment descriptor (i.e. weblogic-ra.xml). This polling process will shut down, unless the fault is related to processing a particular row, in which case polling will continue but the row will be rejected (faulted).
at oracle.tip.adapter.db.exceptions.DBResourceException.createNonRetriableException(DBResourceException.java:682)
at oracle.tip.adapter.db.exceptions.DBResourceException.createEISException(DBResourceException.java:648)
at oracle.tip.adapter.db.exceptions.DBResourceException.inboundReadException(DBResourceException.java:483)
at oracle.tip.adapter.db.InboundWork.handleException(InboundWork.java:922)
at oracle.tip.adapter.db.InboundWork.runOnce(InboundWork.java:826)
at oracle.tip.adapter.db.InboundWork.run(InboundWork.java:578)
at oracle.tip.adapter.db.inbound.InboundWorkWrapper.run(InboundWorkWrapper.java:43)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused by: java.sql.SQLSyntaxErrorException: [FMWGEN][SQLServer JDBC Driver][SQLServer]Invalid object name 'MES2OTCMessage'.
at weblogic.jdbc.sqlserverbase.dda4.b(Unknown Source)
at weblogic.jdbc.sqlserverbase.dda4.a(Unknown Source)
at weblogic.jdbc.sqlserverbase.dda3.b(Unknown Source)
at weblogic.jdbc.sqlserverbase.dda3.a(Unknown Source)
at weblogic.jdbc.sqlserver.tds.ddr.v(Unknown Source)
at weblogic.jdbc.sqlserver.tds.ddr.a(Unknown Source)
at weblogic.jdbc.sqlserver.tds.ddq.a(Unknown Source)
at weblogic.jdbc.sqlserver.tds.ddr.a(Unknown Source)
at weblogic.jdbc.sqlserver.ddj.m(Unknown Source)
at weblogic.jdbc.sqlserverbase.ddde.e(Unknown Source)
at weblogic.jdbc.sqlserverbase.ddde.a(Unknown Source)
at weblogic.jdbc.sqlserverbase.ddb9.a(Unknown Source)
at weblogic.jdbc.sqlserverbase.ddde.v(Unknown Source)
at weblogic.jdbc.sqlserverbase.ddde.u(Unknown Source)
at weblogic.jdbc.sqlserverbase.ddb9.executeQuery(Unknown Source)
at weblogic.jdbc.wrapper.PreparedStatement.executeQuery(PreparedStatement.java:135)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeSelect(DatabaseAccessor.java:888)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:598)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:526)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeCall(AbstractSession.java:980)
at org.eclipse.persistence.internal.sessions.IsolatedClientSession.executeCall(IsolatedClientSession.java:131)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:206)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:192)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.cursorSelectAllRows(DatasourceCallQueryMechanism.java:74)
at org.eclipse.persistence.queries.CursoredStreamPolicy.execute(CursoredStreamPolicy.java:64)
at org.eclipse.persistence.queries.ReadAllQuery.executeObjectLevelReadQuery(ReadAllQuery.java:395)
at org.eclipse.persistence.queries.ObjectLevelReadQuery.executeDatabaseQuery(ObjectLevelReadQuery.java:1076)
at org.eclipse.persistence.queries.DatabaseQuery.execute(DatabaseQuery.java:740)
at org.eclipse.persistence.queries.ObjectLevelReadQuery.execute(ObjectLevelReadQuery.java:1036)
at org.eclipse.persistence.queries.ReadAllQuery.execute(ReadAllQuery.java:380)
at org.eclipse.persistence.internal.sessions.AbstractSession.internalExecuteQuery(AbstractSession.java:2392)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1291)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1273)
at oracle.tip.adapter.db.inbound.DestructivePollingStrategy.poll(DestructivePollingStrategy.java:456)
at oracle.tip.adapter.db.InboundWork.runOnce(InboundWork.java:699)
Plese help.
Thanks,

Hi,
Please verify first that you can run a simple query (not polling) using the same data source.
If not, probably there is a problem with the data source definition.
If yes, verify your polling query is correct, restart SOA server and redeploy your process.
Please post your results...
Arik

Similar Messages

BPEL: invalid namespace error with DB adapter polling and java embedding

Hello
I'm using bpel 10.1.3.1.0, and I'm experiencing the following problem: I'm am not able to use the SetTitle() function in a process which polls for records using the db adapter.
Steps to reproduce the problem:
- I create a very simple bpel process which poll for records in a table.
- I deploy it, write manually a record in the polled table and the process start.
- I can see the record picked up through the visual flow in the console
- everything looks ok and the process ends correctly
- now I add a java embedding activities just after the receive
- I set the instance title like this: setTitle("Go");
- redeploy, write a record in the polled table and the process start.
- but the process ends in error with the following message "XMLDOMException has been thrown. invalid namespace for prefix xmlns"
And there is no way to make it work. Consider:
If I put the same java embedding activity in another process, for example a simple asynchronous process which just copy the input to the output, and I run from the console, the instance title is set as I want ("Go")
If I remove the three lines from the polling process
<bpelx:exec name="Java_Embedding_1" language="java" version="1.3">
<![CDATA[setTitle("Go");]]>
</bpelx:exec>
then the process is executed correctly again. I add them again and then namespace error.
Whatever statement I put in the java embedding activity (for example a string concatenation or even just a comment I have the same result: invalid namespace for prefix xmlns.
Does anybody has a suggestion to evercome the problem? I need to set the title because its a mess to find out which instance processed a specific record.
Thanks by
Paolo

I made a lot of further tests, and I can say the problem is related only to the database adapter polling mechanism.
If I create an asynchronous process, with any kind of database activity (for example select) I can set the title normally.
If I create a process which start with database table polling, then I cannot use the java embedding.
try this:
- create BPEL empty project
- drop a database adapter service and follow the wizard:
- select a connection (I tried both oracle or sqlserver connection)
- select "poll for new or changed record"
- select any table empty or with few record inside (1 or 2)
- press next 4 times
- chose delete record after read (press next)
- chose order by "no ordering" in polling options (press next 2 times)
- now drop a receive activity on the process, and connect with the polling partner link
- drop a java embedding and write any valid java statement
- deploy; if the table is empty, write a recod in the table
- the process is instantiated, but the it fails in the --> receive <-- activity with "invalid namespace" error

File Adapter polls all the files from the directory when deployed again

Hi,
File Adapter polls all the files from the inbound directory irrespective of the timestamp when deployed again.
For ex. when the BPEL process with file adapter is deployed, it starts polling the directory based on the timestamp as and when the directory is written with the files. I did not opt for deleting the files after read by the File Adapter.
But, when BPEL process is modified and deployed again, this time, the file adapter picks up all the files in the inbound directory and doesn't consider the timestamp.
My guess is that it should not pick all the files but based on timestamp only.
I guess I can observe the same behavior if I bounce the Application Server also
Do I have an option to achieve this?
Thanks,
Sasi Bhushan.

try this:
1- create a File object for the directory. (look at isDirectory() )
2- create a File[] that represents the files in that directory. (.listFiles())
3- if (file[x].isDirectory()) {recursive method call;}
4- else {
process file;
If you want more help--do some work on it, and come back with specific questions relating to specific lines in your code and specific error messages you've been receiving.

OSB DB Adapter Polling Issue

Hello Everybody,
Requirement
I am doing DB Adapter polling in OSB.I have a db adapter which polls order table whenever there is a record with status='N'.The OSB component is on single node of Weblogic Server.
1.The db adapter picks the order data with status='N' in the proxy service
2.It transforms to webservice xsd
3.Invokes a webservice.
4.The webservice returns acknowledgement number.
5.The order table should be updated with status 'Z' and attribute1=acknowledgement number
OSB Service Design
1.Proxy service calls business service to poll the order table
2.Converts the payload to the xsd format required by target
3.Invokes the webservice on target
4.Receives acknowledgement number
5.calls a plsql procedure which updates all the records within this batch with the acknowledgement number and status='Z'
My configurations in db adapter
Logical delete option in db adapter.
Unread Value :'N'
Read Value : 'A'
Polling frequency : 300 seconds
no of databse rows per XML document : 10
Database rows per transaction : 10
Issue
1.My process after getting the acknowledgement number it updates the status with Z and attribute1=acknowledgement number.At the of this transaction I am seeing that the status is being updated by
the adapter to 'A' based on read value.I want the read value only to be updated initially but as soon as my OSB process picks it for further processing it should not update again.How can i prevent
the status from getting updated to 'A'.
2.I have 40 records in order table.Per the database rows per transaction it should process 10 records at a time and for each batch of 10 i should get one acknowledgement number.Instead i see that
all the 40 records are updated with the same acknowledgement number.Kindly help as to how I can resolve this situation.
Thanks & Regards,
Radha

Hi Arik,
I tried setting the property(idempotent) in jca file of the polling adapter and it gave me below error.Kindly help
<adapter-config name="EBS_FETCHDATA" adapter="Database Adapter" wsdlLocation="EBS_FETCHDATA.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/newebs" UIConnectionName="EBS" adapterRef=""/>
<endpoint-activation portType="EBS_FETCHDATA_ptt" operation="receive">
<activation-spec className="oracle.tip.adapter.db.DBActivationSpec">
<property name="DescriptorName" value="EBS_FETCHDATA.XxcmfOtmOrderHdrIfaceTmp"/>
<property name="QueryName" value="EBS_FETCHDATASelect"/>
<property name="MappingsMetaDataURL" value="EBS_FETCHDATA-or-mappings.xml"/>
<property name="PollingStrategy" value="LogicalDeletePollingStrategy"/>
<property name="MarkReadColumn" value="OTM_INTERFACE_STATUS"/>
<property name="MarkReadValue" value="A"/>
<property name="MarkUnreadValue" value="N"/>
<property name="PollingInterval" value="60"/>
<property name="MaxRaiseSize" value="10"/>
<property name="MaxTransactionSize" value="300"/>
<property name="NumberOfThreads" value="1"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="idempotent" value="false"/>
</activation-spec>
</endpoint-activation>
</adapter-config>
---------------------ERROR---------------
Invalid JCA transport endpoint configuration, exception: javax.resource.ResourceException: BINDING.JCA-12532 Cannot set JCA WSDL Property. Error while setting JCA WSDL Property. Property setIdempotent is not defined for oracle.tip.adapter.db.DBActivationSpec Please verify the spelling of the property.
Thanks,
Radha

Database Adapter Poll doubt

My requirement is, when ever a new recored inserted to CREDITCARDINFOPARENT table need to insert the same record to CREDITCARDINFORESULT;
desc CREDITCARDINFOPARENT;
Name Null? Type
SNO NUMBER
SSN NOT NULL VARCHAR2(15)
FIRST_NAME VARCHAR2(30)
LAST_NAME VARCHAR2(30)
CCNUMBER NOT NULL VARCHAR2(20)
CREDITRATING NUMBER
STATUS NOT NULL VARCHAR2(20)
CCNumber is my primary key
desc CREDITCARDINFORESULT;
Name Null? Type
NO NUMBER
SN NOT NULL VARCHAR2(15)
FIRSTNAME VARCHAR2(30)
LASTNAME VARCHAR2(30)
CCNUMBER VARCHAR2(20)
CRATING NUMBER
CCSTATUS NOT NULL VARCHAR2(20)
CCNUMBER is Foreign Key.
I tried Poll DB adapter example in the following way
Created a project with "Composite with Mediator"
under exposed services I dragged DB Adapter
Service Name-> Example Service
Step 4 of 13 -> selected Poll or Changed Records in a table
step 5 of 13 -> imported 2 tables (CREDITCARDINFOPARENT, CREDITCARDINFORESULT)
step 6 of 13 -> displayed the Relationships
step 8 of 13 -> After Read -> selected Update a Sequencing Table
step 9 of 13 -> Sequencing Table: CREDITCARDINFORESULT
     Sequence Name Field: CCNUMBER
     Sequence Value Field: STATUS
     Sequence ID Field: CCNUMBER
step 10 of 13 -> Polling Options: SQL
          Pre Polling SQL:
SELECT STATUS FROM CREDITCARDINFORESULT WHERE (CCNUMBER = 'CREDITCARDINFOPARENT')
Polling SQL:
SELECT SNO, SSN, FIRST_NAME, LAST_NAME, CCNUMBER, CREDITRATING, STATUS FROM CREDITCARDINFOPARENT WHERE ((STATUS = 'VALID') AND (CCNUMBER > #STATUS)) ORDER BY CCNUMBER ASC
After Read SQL:
UPDATE CREDITCARDINFORESULT SET STATUS = #STATUS WHERE (CCNUMBER = 'CREDITCARDINFOPARENT')
step 11 of 13 ->Define Selection Criteria:
          Parameters:ccno
          SQL: SELECT SNO, SSN, FIRST_NAME, LAST_NAME, CCNUMBER, CREDITRATING, STATUS FROM CREDITCARDINFOPARENT WHERE ((STATUS = 'VALID') AND (CCNUMBER > #STATUS)) ORDER BY CCNUMBER ASC
Under External Services : I dragged DB Adapter and i selected Perform an Operation on a table as Insert Only. and I imported CREDITCARDINFORESULT
I deployed the the Project. Project depolyed successfully;
under EnterpriseManager command prompt I got
<Jun 29, 2010 2:25:46 PM IST> <Warning> <oracle.soa.adapter> <BEA-000000> <JCABinding=> ExampleProject JNDI lookup of 'eis/DB/soademodatabase' f
ailed due to: Unable to resolve 'eis.DB.soademodatabase'. Resolved 'eis.DB'>
<Jun 29, 2010 2:25:46 PM IST> <Error> <oracle.soa.adapter> <BEA-000000> <JCABinding=> ExampleProject Error while performing endpoint Activation:
BINDING.JCA-12561
JCA Resource Adapter location error (WebLogic).
Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/>
The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/soademodata
base'.
The reason for this is most likely that either
1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic J2EE Application server or
2) the JNDI <jndi-name> setting in the WebLogic JCA deployment descriptor has not been set to eis/DB/soademodatabase. In the last case you might
have to add a new 'connector-factory' entry (connection) to the deployment descriptor.
Please correct this and then restart the WebLogic Application Server
>
I confugired the Connection factory properly; I checked at DB Adapter -> Configuration -> Outbound Connection Pools -> xADataSourceName -     jdbc/soadeoDatabase
when I checked at JNDI tree I dont have any value under it.
in Firefox EM, when I clicked on Example Project Test button is disabled. and I inserted one record to CREDITCARDINFOPARENT; but CREDITCARDINFORESULT table is not updated.
can any body help me in this?
Please let me know whether I follwed correct procedure or not?
If I am wrong, please provide me the correct steps.
Thanks in Advance.

This error is usually raised if there is no outbound pool connections with the "eis/db/soademodata" name in the database adapter.
First create a data source to the database in the JDBC Resources.
Next in Weblogic server console --> Deployments --> DBAdapter --> Configurations --> Outbound Pool Connections --> create a new outbound pool connection with the name "eis/db/soademodata".
Now update the "xADataSourceName" property of this connection pool with the JNDI name of the datasource created in the first step.
Regards,
KSN Pavan
Edited by: KSN Pavan on Jun 30, 2010 2:51 AM

DB Adapter polling is stopped because of SQLServerException

Hi
I am doing a DB adapter polling to MS SQL server database. If I am decreasing my polling frequency too low say 5 seconds, I am getting the below error some times and the polling process is getting stopped.
Query name: [Poll_xworlds_eventsSelect], Descriptor name: [Poll_xworlds_events.XworldsEvents]. Polling the database for events failed on this iteration.
Caused by com.microsoft.sqlserver.jdbc.SQLServerException: Lock request time out period exceeded..
This exception is considered not retriable, likely due to a modelling mistake. To classify it as retriable instead add property nonRetriableErrorCodes with value "-1222" to your deployment descriptor (i.e. weblogic-ra.xml). This polling process will shut down, unless the fault is related to processing a particular row, in which case polling will continue but the row will be rejected (faulted).
Also can anybody tell me how to add this in weblogic-ra.xml and which weblogic-ra.xml. this is 11g.
Thanks.

Changing the retryInterval and retryCount for that adapter process solved the problem. Thanks. I assume there's no bad side effects if I set this to keep trying for an hour or so? That's how long the target DB may be down for backups.
Thanks,
Lon

How to get Alerts mail for adapter engine errors in SAP PI 7.0

Hi Friends,
I configured Alerts in PI 7.0. with the help of t-code u2018ALRTCATDEF and created a new alert catergory.
In container tab i have mentioned all give below elements.
SXMS_MSG_GUID, SXMS_RULE_NAME, SXMS_ERROR_CAT, SXMS_ERROR_CODE, SXMS_FROM_PARTY, SXMS_FROM_SERVICE, SXMS_FROM_NAMESPACE, SXMS_FROM_INTERFACE, SXMS_TO_PARTY, SXMS_TO_SERVICE, SXMS_TO_NAMESPACE,SXMS_TO_INTERFACE
I am getting alerts when I manually test the alerts configurations by running the report u2018RSALERTTESTu2019.
I am getting mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
But When I am getting a error , I am not getting an alert mail. Right now iam doing in XI Development.
I am not getting an Alert mail , when my message is in status of : System Error . Error catergory is : XI_J2EE_ADAPTER_JDBC.
Kindly tell how to get alert mail for error catergory : XI_J2EE_ADAPTER_JDBC and in Adapter engine errors.
How to get alert mail when my message is failed with any reason in Adapter engine.
Waiting for quick replay. Please help me out.
Regards,
Ahmed.

Hi thanks for quick reply.
As per your given link : http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/14877. [original link is broken]
I have done all these steps. But still little problem.
as per link he is getting Error description , error message id , alert rule..
In my case I am not getting these information. when my messages failed. When I am doing manully testing the alert getting an mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
Is it okay the body of mail??.
I am not getting alert mail when my messages failed in adapter engine and Integration Engine.
Ex my message is failed in AE:as below.
My messages flow as : SAP --> XI --> DB.
Messages is success (in ECC moni)> XI moni also success> XI Adapter engine getting error as (Status: System Error) and (Error Category : XI_J2EE_ADAPTER_JDBC).
Regards,
Ahmed.

DB adapter polling in OSB

1. In a clustered environemnt, we need to use "Distributed polling" in DB adapter to make sure the multiple cluster instances are not polling for the database at the sametime. If "Distributed polling" can achieve that, what is the need to have singleton property set for the DB adapter in the composite.xml
2. For achieving DB adapter polling in osb, we need to create the adapter in bpel and then export them to osb project. In such OSB project, where do we set the singleton property ?

Thanka Ananth.
I assume active-passive cluster setup means,
there will be a cluster with only one osb or bpel managed server (active cluster)
There wil be another cluster with only one osb or bpel managed server (passive cluster).
so when there is some data inserted into the database, there will be only one managed server (available on active cluster) will be available to poll for the recored. Passive man server does not poll for this record. I assume this is the default behaviour. If such is the case, then what is the use of setting this singleton property ?

Error -: AIP-50031: B2B adapter general error: java.lang.NullPointerExce

I have configured two B2B trading partner over ebMS communication. I have also configured an internal delivery channel using JMS.I am posting a msg(the Tp identification is through duns no.) on the JMS queue and I am not able to receive it on the Tp side and i am getting the following error
008.11.28 at 01:53:36:544: Thread-13: B2B - (ERROR) java.lang.NullPointerException
     at oracle.tip.adapter.b2b.msgproc.DbAccess.insertMsgTblRow(DbAccess.java:806)
     at oracle.tip.adapter.b2b.msgproc.DbAccess.updateWireBusinessToErrorState(DbAccess.java:5365)
     at oracle.tip.adapter.b2b.engine.Engine.handleOutboundException(Engine.java:4109)
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1130)
     at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:137)
     at oracle.tip.transport.basic.jms.JMSMonitor.processMessages(JMSMonitor.java:610)
     at oracle.tip.transport.basic.jms.JMSMonitor.run(JMSMonitor.java:236)
2008.11.28 at 01:53:36:544: Thread-13: B2B - (ERROR) Error -: AIP-50031: B2B adapter general error: java.lang.NullPointerException
     at oracle.tip.adapter.b2b.msgproc.DbAccess.updateWireBusinessToErrorState(DbAccess.java:5426)
     at oracle.tip.adapter.b2b.engine.Engine.handleOutboundException(Engine.java:4109)
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1130)
     at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:137)
     at oracle.tip.transport.basic.jms.JMSMonitor.processMessages(JMSMonitor.java:610)
     at oracle.tip.transport.basic.jms.JMSMonitor.run(JMSMonitor.java:236)
Caused by: java.lang.NullPointerException
     at oracle.tip.adapter.b2b.msgproc.DbAccess.insertMsgTblRow(DbAccess.java:806)
     at oracle.tip.adapter.b2b.msgproc.DbAccess.updateWireBusinessToErrorState(DbAccess.java:5365)
I am able to recevie the Heased but not the payload
     ... 5 more

Hi,
":" - has been used as default separator so if you identifier holds this value, please enable add the tip.properties entry as below and things should be fine.
oracle.tip.adapter.b2b.partyTypeAndValueSeparator=#.
Here's a sample for jms enqueue,
FROM_PARTY= urn:oasis:names:tc:ebXML-cppa:partyid-type:duns#232510151
TO_PARTY= urn:oasis:names:tc:ebXML-cppa:partyid-type:duns#123456789
Just replace the "FROM_PARTY" and "TO_PARTY" as "from" and "to" for AQ.
Thanks,
Sinkar
[From Ramesh Team]

SRFC-adapter and file adapter with error: no adapter found

Hello,
we have two scenarios here in an XI 3.0 SP12:
First scenario connects two R/3 systems via RFC adapter (outbound / inbound) for an RFC in a standard R/3 function module SUSR_ZBV_GET_REMOTE_PROFILES.
The RFC is synchronous.
Second scenario uses file adapter to send file from A to B.
When starting the RFC call from the sender system the error message in area "call adapter" for XML message in the trace is "exception while reading from SLD:Property sap_xiadapterservice.adapterType does not exist".
Message in RWB:
"Transmitting the message using connection http://abc038.ceu.test.com:8077/sap/xi/engine?type=entry failed, due to: XIServer:AE_DETAILS_GET_ERROR:Property sap_xiadapterservice.adapterType does not: Unable to find any Adapter Engines."
Same problem for file adapter!
Here is the message from the file adapter error log entry in SXMB_MONI:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.kx1.test038</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>Property sap_xiadapterservice.adapterType does not: Unable to find any Adapter Engines</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.kx1.test038</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Looks like an identical problem for both adapter.
What we have done (checked) so far:
- SLD connection is working
- Vis.Admin.: no problems found
(SAP RFC adapter active, file adapter active)
- Component monitoring: no errors, adapters are fine
- all rfc connections checked: ok
- have checked user and pwd and replaced to be sure
- cache refresh: ok
- reimport of SWCV to IR for RFC: done, no result
Does anybody have an idea, how to get rid of that?
Best regards
Dirk

Hello Udo,
in Adapter monitoring all adapters are listed and per adapter (here RFC and FILE) all adapter entries from the scenarios are available (sender / receiver comm. channel entries - in green)!
Pipeline URL in SLD Bus. Syst. is fine ( and an IDOC adapter scenario is running successfully) !
I think this is a really tricky one!
Best regards
Dirk

Error in Inbound B2B: AIP-50031: B2B adapter general error: java.lang.Null

Hi,
I am getting the following error in inbound B2B - Custom Document over Generic Exchange - SFTP
Description: B2B adapter general error
StackTrace:
Error -: AIP-50031: B2B adapter general error
     at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1900)
     at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2657)
     at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2527)
     at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2482)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:530)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:376)
     at java.lang.Thread.run(Thread.java:534)
]]>
The outbound B2B is working fine; however for the inbound file transfer the file is picked up from the trading partner and this exception occurs.
Thanks

Please paste more log in trace 32 mode. What is the name of the file you are receiving? By default B2B expects incoming filename as -
<FromTPName>UniqueId.<anyFile_Extn>
For e.g., if partner MarketInc is sending the file then it's name should be - MarketInc_12345.dat or MarketInc_34567.xml
Make sure that listening channel is not marked as internal as well.
Regards,
Anuj

FIle adapter polling at a particular time

Hi,
I want to pull a file say at 12.00 am always from a FTP server.
Is there any scheduler in XI where in I can start the adapter polling without manually activating the file adapter at 12.00 am
Thanks,
Sachin

HI,
As of now File Adapter doesnot support this. Refer SAP Note 821267 Question No 18.
There is some workaround is there. Using BPM etc..
Regards,
Moorthy

BINDING.JCA-12510 JCA Resource Adapter location error in SOA 11g Suite

Hi,
I am just testing one simple SOA Application in SOA 11g Suite. Created a SOA Composite Application with one DB Adapter at designtime all worked fine with DB Adapter. But when I deploy the Application on the server I get the following error:
The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/soademoDatabase'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/soademoDatabase. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ".Do I need to jndi-name in weblogic-ra.xml if so what is the exact location. Any help is appreciated.
Thanks

I did but still not able to connect now getting the following error. I went to the Weblogic Console, clicked on deployments, selected DBAdapter, clicked on configuration ,
and then I don't see outbound configurations instead it shows Outbound Connection Pools, Under Outbound Connection Pools tab I clicked on New and it asked to select Outbound Connection Group I selected the one that was already there (with JNDI eis/DB/SOADemo) and then created my JNDI which was added to the default Outbound Connection Group and in the end it asked to save the Plan.xml which I saved it under a new directory created under soa directory. But still am not able to connect.
How do I create my own Connection Group as don't want to use the defualt one out there.
After creating the JNDI Name it asks for saving the Plan.xml file. Where exactly we save this file. Are there any standards.
Why can't I update any properties when I click on the new JNDI name it takes to Settings for javax.resource.cci.ConnectionFactory --> Outbound Connection Properties but there I see a save buttn but I can't make any changes.
BINDING.JCA-12563 Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'getCreditValidationSelect' failed due to: Could not create/access the TopLink Session. This session is used to connect to the datastore. Caused by javax.resource.spi.InvalidPropertyException: Missing Property Exception. Missing Property: [DBManagedConnectionFactory.userName]. You may have set a property (in _db.jca) which requires another property to be set also. Make sure the property is set in the interaction (activation) spec by editing its definition in _db.jca. . ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. Is there any documentation that lists all these steps as I couldn't find it anywhere. The guide only talks abou DBAdapter but how to configure etc can't find any info. Any help is appreciated.
Thanks.

Alert for adapter engine error

Hello experts
We have configured the alerts for the adapter engine errors .We have configured the variable &SXMS_TO_ADAPTER_ERRTXT& element which is having the CHAR70 type for getting the adapter engine error text in the alert inbox.so for any adapter engine error greater than 70 chracters ,it is getting truncated to 70 chracters only.but we want to have the whole adapter error log text.
Can anyone please throw some light on this.
Thanks
sabyasachi

Moha,
It seems that it cannot support more than that.
Problem with Alert Text
Re: Message Size in ALERTS
It is worth taking a look at this blog:
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
Regards,
---Satish

AS2 Adapter in error

Hello,
I have got an error in AS2 adapter.
Error message is as shown below :
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: org.apache.commons.httpclient.ProtocolException: Unbuffered entity enclosing request can not be repeated. # , SEEBURGER AS2: org.apache.commons.httpclient.ProtocolException: Unbuffered entity enclosing request can not be repeated. #
we are struggling for this error for quite few days.
Can anyone help me out what we can check in this ?? what could be a possible cause for same??
Thanks a lot in adavance !!!
Regards,
Vikrant

Hi Vikrant
Just have alook at this thread may get some clue ..
Seeburger AS2 Adapter sending message error
Re: Error in AS2 RCV adapter.. SEEBURGER AS2: 307 Temporary Redirect #
Regrds
Abhishek

DB adapter polling error

Similar Messages

Maybe you are looking for