DB Control and custom reports

Hi Gurus
I have OEM DB control installed on 10203 db. Two questions :
1. I am having hard time finding where standard reports are, can some point me to the right option ?
2. Does OEM DB Control gives you the ability to create your own reports ?
Thanks a lot
Kanwal

I could be incorrect on this ... but the capability you are describing is in the OEM Grid Control. I don't recall seeing it in the OEM DBConsole.

Similar Messages

Standard and customized reports

Experts,
I'm given a requirement to create some reports. Was hoping someone can help me with which are standard and customized reports from this list :
OPEN PURCHASE ORDER REPORT
OPEN REQUISITION REPORT
OPEN RFQ REPORT
PURCHASE ORDER CONFIRMATION REPORT
STOCK ITEMS RE-ORDER
STOCK ITEMS RESERVED
STOCK ITEMS ABOVE STOCK MAX
STOCK ITEMS BELOW STOCK MIN
STOCK ITEMS DETAILS
STOCK ITEMS INVENTORY CONTROL
STOCK ITEMS LIST BY NUMBER
STOCK ITEMS MOST USED
STOCK ITEMS NOT USED
STOCK ITEMS ORDER BY COST
STOCK ITEMS ORDER BY LOCATION
STOCK ITEMS ORDER BY VENDOR
STOCK ITEMS OVER RESERVED
STOCK ITEMS STATUS
STOCK ITEMS VALUE
VENDOR PERFORMANCE REPORT
Regards,

Hi,
SAP Std. Reports     Description                                                                          Z-Dev
ME2N / ME2M / ME2L     OPEN PURCHASE ORDER REPORT
ME5A                          OPEN REQUISITION REPORT
ME4N / ME4M / ME4L     OPEN RFQ REPORT
ME2A / VL06I     PURCHASE ORDER CONFIRMATION REPORT
MB53                          STOCK ITEMS RE-ORDER                                                     ABAP Report
MB24 / MB25                          STOCK ITEMS RESERVED
                          STOCK ITEMS ABOVE STOCK MAX                                ABAP Report
                          STOCK ITEMS BELOW STOCK MIN                                ABAP Report
MMBE / MB52     STOCK ITEMS DETAILS
MC.1 / MC.9                           STOCK ITEMS INVENTORY CONTROL
MMBE / MB52     STOCK ITEMS LIST BY NUMBER
MC46                           STOCK ITEMS MOST USED
MC50                           STOCK ITEMS NOT USED
ME2N / ME2M / ME2L     STOCK ITEMS ORDER BY COST
ME2N / ME2M / ME2L     STOCK ITEMS ORDER BY LOCATION
ME2L                          STOCK ITEMS ORDER BY VENDOR
MB24/MB25                           STOCK ITEMS OVER RESERVED                                        ABAP Report
MMBE/MB53                           STOCK ITEMS STATUS
MB52                           STOCK ITEMS VALUE
ME6H                           VENDOR PERFORMANCE REPORT

Ageing wise vendor and customer report

hi....
Where i can get ageing wise vendor and customer report?
Thanks & Regards
Rekha shrama

Hello
First configure credit management & customise.
A/R Summary
Degree of ageing
You can set the allowed degree of ageing in Customizing for Sales, under Basic Functions ® Credit Management/Risk Management ® Credit Management ® Define Automatic Credit Control.
Under Checks in financial accounting/ old A/R summary, you can enter the permitted degree of ageing for the A/R summary, in the fíelds Permitted days and Permitted hours. Here, you can define how old the A/R summary can be, in order to be called up for a check. If the permitted degree of ageing for the A/R summary is exceeded in the credit check, then the document is blocked.
Fields allowed days and allowed hours are only available for entry if you have entered an X in field Read A/R Summary in Customizing. The path is: Accounts Receivable and Accounts ® Credit Management ® Credit Control Account ® Make basic settings for credit management.
Updating
The A/R summary is either sent periodically (with the help of the report RFCMCRCV) from central Financial Accounting to the decentralized Sales and Distribution units according to ALE distribution model or, if an obsolete A/R summary is presented, updated for the credit check by the system per remote function.
In order that the system is burdened as little as possible, SAP recommends you stick to the following order:
Program run: Incoming payments in central FI
Program run: Distribution A/R summary from central FI to decentralized Sales and Distribution units
Program run: Renewed credit check for blocked sales documents in decentralized Sales and Distribution units
Status Management for Obsolete A/R Summary
If the A/R summary is obsolete, the credit status Credit data obsolete is set. This means that the document is blocked, and appears in the credit representativeu2019s worklist. In Customizing for Sales, in the section Automatic Credit Control, for the single, aforementioned checks, for which FI data is necessary, you can define whether a warning appears in the obsolete data, or whether a status is set.
If you are working with the A/R summary, and would like to re-process obsolete data, it is recommended that you set a status.
Reg
suresh

Export standard and Custom report to xls / word / power point ??

Hi
Apps: 12.1.3
DB 11gR1
Is there any tool so that i can save standard and Custom report to xls / word / power point ??
Thanks
Vishwa

There are a few third party tools that let you do that.
Some such tools are Monarch, Rep2excel etc.
Google for "convert oracle report to excel" and you will get a few more hits.
The best way to get it in Excel is to change the output format to XML and write a quick XML publisher template.
Hope this helps
Sandeep Gandhi
Independent Consultant

OBIEE 11G and Custom Reports

I went to a presentation the other day on the new 11G. One of the things they said was that if you have custom reports and custom subject areas, you will have to recreate them after you upgrade. The upgrade is supposed to wipe them out. I'm hoping I misunderstood.
We keep all of our custom reports and dashboards in a folder in the catalog seperate from the out of the box dashboards.
We have created new subject areas with our own naming standard seperate from the out of the box subject areas.
When we upgrade, am I really going to lose all of the work we have already done? Will my dashboards go away? Will my reports disappear? Can I import them back somehow?
Panic'd in KC,
B

Hi,
But I'm still not sure if my custom reports are going to be upgraded too or if they will get deleted.Reports will not get deleted but some reports may not work properly....Lot of testing is to be done....
From the blog....
We cannot expect all the reports to start working out of the box immediately after an upgrade. Good amount of testing is required to make sure all the older queries of the most commonly used reports are working without any major issues. Also, not all the reports would get migrated seamlessly due to the significant changes across the versions which the utility cannot recognize.
Regards,
Srikanth

Firefighter 5.1 and custom reports

We are not entirely happy with the reports FF 5.1 produces and we are not ready to upgrade to a newer release. Has anyone had any success creating any custom reports for FF 5.1?
Thanks in advance for any help anyone can offer
Dave Wood

nevermind. i found the fix. https://discussions.apple.com/message/15682076#15682076
ssh into the offending machine and type:
sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -deactivate -configure -access -off
sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -activate -configure -access -on -restart -agent -privs -all
voila. see here for more: http://support.apple.com/kb/HT2370
Summary
Note: This document does not apply to ARD version 1.2 or earlier or versions 1.2.1 to 1.2.4. Apple Remote Desktop 2 or later include the "kickstart" command line utility. It allows you to install, uninstall, activate, configure, and restart components of Apple Remote Desktop without restarting the computer. You can configure all the features found in Apple Remote Desktop preferences.

GnuCash 2.6.6 and custom reports

I've just spent a bit of time trying to figure out why 2.6.5 -> 2.6.6 had caused custom reports to fail. I'm not fluent with Guile or Scheme, and my custom reports are just hacks of files copied from those supplied with the package with help from GnuCash documentation.
WIth a lot of trial and error, and a hunch that the fix for bug 619899 regarding how .scm files are processed was causing the problem (especially after following the link given in Comment 7 there re. the use of intltool/xgettext), I've got it working with "s/N_ /_ /", changing the format of all the internationalisation strings. All those which were part of the packaged .scm file needed to be changed, though, not just ones I'd entered.
Does this make sense to anyone? As I say, I don't really know what I'm doing, so don't know if it's an Arch-specific problem, a bug with GnuCash or with another package that needs reporting, or an error on my part.

NoOneImportant wrote:
Thanks.
I will be doing a reinstallation tomorrow morning because I think I screwed everything up.
Here's another question.
If I do a system update, which will install a kernel update, should I generate a new image using mkinitcpio?
Better yet, should I just generate a new image upon doing a successful boot without the update?
1. No, the install script for the kernel package will take care of building a new image.
2. I really don't see any point in doing this either. It is true that there are times the image requires rebuilding (as stated above) but if you install with the newest iso you'll already have a working image upon boot.
Have you tried 0.8-beta iso?

Vendor and customer report

Is there any report which shows how much has been paid to vendors during a month and similarly received from the customers during the month?

Hi,
S_ALR_87012177 - Customer Payment History
F.23 - Account Balances Customer
S_ALR_87012085 - Vendor Payment History with OI Sorted List
F.42 - Account Balances
Hope this is clear if yes assign points.
Regards,
Sankar

WBS Standard report and customized reports

Hi Frnds
we have one SAP standard reports for WBS elements ( plan/actual/variance) and one whichis customized project management report in Projects systems but both the reports are showing different balance.
is there any particular reason for showing different balance for both actual and budget colum?
plz reply asap
thanks
manish

Hi,
Thanks for reply...
If u have any idea regarding other reports, please let me know...
Thanks..

Custom Reports using Book of Business

I was wondering if anyone can provide some help with book of business and custom reports. I have tried to created a custom report and changed the Book in the book selector at the top of the reports page, but it still returns results from all of the entries as opposed to just those associated with the book. Any ideas?
Thanks in advance.

Yes BOB affects reporting, you need to setup your user record in a particular way, send me an email and i'll send you the doc that explains how. alex.neill@{see profile}
Stuart - I have your email address I'll send it through as soon as I find it.
cheers
alex

Is there anyone at all here who has successfully compiled and deployed an SSRS custom report item in VS2012?

Is there anyone at all here who has successfully compiled and deployed an SSRS custom report item in VS2012? Is there a demo out there that actually works in VS2012? Is there anyone who has actually been able to compile and deploy that
apparently obsolete Polygons demo? (Pardon my impatience but I'm running a bit short of time here.)
After much hacking and googling I was able to get Polygons to compile but I still can't deploy it to the toolbox. ('The custom report item type PolygonsDesigner is not installed'). I've modified the RSReportDesigner.config
as instructed but I have no rssrvpolicy.config file on my local machine and
as yet I have no idea if that is necessary for local development.
In order to get it to compile I first added the reference C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\PrivateAssemblies\Microsoft.ReportingServices.ProcessingCore.dll to both projects.
To the PolygonsDesigner Project I also added the references:
C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\PrivateAssemblies\Microsoft.ReportDesigner.Controls.dll
C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\PrivateAssemblies\Microsoft.ReportingServices.Designer.11.0.dll
C:\Program Files (x86)\Microsoft SQL Server\110\Tools\Binn\Microsoft.ReportingServices.Interfaces.dll
Are these the correct references?
Exactly what software do you need installed on your local machine in addition to VS2012 in order to create a custom control?
(Designer.11.0 was added per the instructions in reference: https://connect.microsoft.com/VisualStudio/feedback/details/783391/unable-to-integrate-previously-working-ssrs-custom-report-item-to-vs-2012s-toolbox
After that I added the alias RSDesigner to it's properties and extern alias RSDesigner; at the top of the PolygonsDesigner.cs file. )
As of now, the top of the PolygonsDesigner.cs is as follows. I don't recall making any other changes to the code. As far as I can remember this is all I did in order to be able to compile the code in VS2012.
extern alias RSDesigner;
using System;
using System.ComponentModel;
using System.ComponentModel.Design;
using System.Collections;
using System.Collections.Generic;
using System.Diagnostics;
using System.Drawing;
using System.Windows.Forms;
using Microsoft.ReportDesigner;
using Microsoft.ReportDesigner.Design;
using Microsoft.ReportingServices.Interfaces;
using Microsoft.ReportingServices.RdlObjectModel;
using System.Xml;
using System.Xml.Xsl;
using System.Xml.XPath;
[LocalizedName("Polygons")]
[Editor(typeof(CustomEditor), typeof(ComponentEditor))]
[ToolboxBitmap(typeof(PolygonsDesigner), "Polygons.ico")]
[CustomReportItem("Polygons")]
[ToolboxItem(typeof(RSDesigner::Microsoft.ReportDesigner.Shell.CRIToolboxItem))]
[System.CLSCompliant(false)]
public class PolygonsDesigner : CustomReportItemDesigner
{ etc...

Just fixed this myself.
It appears the documentation online is wrong and the sample code is missing a reference to a reporting services dll and an attribute.
What you need to do to get it working in VS2012 is add a reference to: Microsoft.ReportingServices.designer.11.0.dll to the PolygonsDesigner project and then add the following attribute to the PolygonsDesigner class: [ToolboxItem(typeof(Microsoft.ReportDesigner.Shell.CRIToolboxItem))]
I also removed the [System.CLSCompliant(false)] attribute.
You then recompile and place both dlls in C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\PrivateAssemblies directory and the PolygonsDesigner.dll into the C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer\bin
or what ever is you reporting services path.
You also need to change the Microsoft example for the rereportserver.config file to:
    <ReportItemDesigner>
   <ReportItem Name="Polygons" Type="Microsoft.Samples.ReportingServices.PolygonsDesigner, PolygonsDesigner" />
    </ReportItemDesigner>
    <ReportItems>
   <ReportItem Name="Polygons" Type="Microsoft.Samples.ReportingServices.PolygonsCRI,PolygonsCRI"/>
    </ReportItems>
Notice that I changed the namespaces and class to what is in the actual code so if you change it make sure you change it here.
And here in the RSReportDesigner.config:
<ReportItems>
      <ReportItem Name="Polygons" Type="Microsoft.Samples.ReportingServices.PolygonsCustomReportItem,PolygonsCRI" />
    </ReportItems>
    <ReportItemDesigner>
      <ReportItem Name="Polygons" Type="Microsoft.Samples.ReportingServices.PolygonsDesigner, PolygonsDesigner" />
    </ReportItemDesigner>
    <ReportItemConverter>
      <Converter Source="Chart" Target="Polygons" Type="PolygonsCRI.PolygonsConverter, PolygonsDesigner" />
    </ReportItemConverter>
Notice I haven't changed the last part as I didn't know what the PolygonsCRI.PolygonsConverter was.
And make sure the rssrvpolicy.config looks like this:
     <CodeGroup class="UnionCodeGroup" version="1" PermissionSetName="FullTrust" Description="This code group grants PolygonsCRI.dll FullTrust permission. ">
       <IMembershipCondition class="UrlMembershipCondition" version="1" Url="C:\Program Files\Microsoft SQL Server\MSRS10_50.SQLSERVER\Reporting Services\ReportServer\bin\PolygonsCRI.dll" />
    </CodeGroup>
After a restart of ssrs and relaunch of VS2012 I opened a test project and added the PolygonsDesigner.dll to the toolbox and it works.
Jamie

GL Custom Reports not displaying source and line item Data after Upgrade

Hi,
I am having this issue even though General Ledger Journal Entry Summarization is set to "No Summarization" and in SLA the Line Type is set in detail for Transfer to GL. Have you come accross a specfic example like this? Can you please guide me to what the problem may be?
None of the GL reports is showing the Source and Line Item details.
Thanks,
Arun

I am having this issue even though General Ledger Journal Entry Summarization is set to "No Summarization" and in SLA the Line Type is set in detail for Transfer to GL. Have you come accross a specfic example like this? Can you please guide me to what the problem may be?
None of the GL reports is showing the Source and Line Item details.Have you verified the queries of those reports after the upgrade? And, when you say upgrade, do you mean from 11i to R12?
Did you set the application context properly?
How to set the Organization Context in R12? [ID 437119.1]
Oracle Applications Multiple Organizations Access Control for Custom Code [ID 420787.1]
SQL Queries and Multi-Org Architecture in Release 12 [ID 462383.1]
Setting APPS Context is mandatory step while loading data using public APIs [ID 473615.1]
Thanks,
Hussein

GRC Process Control 2.5 - Custom Reports

We need to develop few custom reports on GRC Process control 2.5. For this we need to identify the Table & Column names associated with WEB Dynpro component.
For example, I need to know the Table & Column names for web dynpro component:GRPC_MANU_TEST.
Please help me.
Thanks
Sankar

Hi Sankar,
Officially, there is no support for custom development of reports in PC 2.5. I will suggest to wait till PC 3.0.
Best Regards,
Jennifer Cha
Process Controls - Americas/APJ
Regional Implementation Group
SAP Governance, Risk and Compliance

Custom Report for slow and fast moving items

Dear Xperts,
My client wants to develop a new report for slow and fast moving items, I checked the std report MC46 however as per std SAP design this report does not consider the special stock like project stock (Q)...could you please help me to know how can develop this new report with following input and output fields?
Input fields:
Plant
Material
Material Group
MRP Area
Special Stock Indicator
Special Stock (Type)
Output Fields:
Material
Material type
Material group
MRP Controller
MRP Area
ABC indicator
Material price
Category field – Slow, Fast, Non-moving
Current Stock
Last Issue Date
Thanks in Advance
Regards
Rahul

Dear Rahul,
If you required project stock and consignment stock with valuated stock report in same place you need to generate new info structure as given below link. Or you can go with customized report with abaper.
Info structure validation
Regards
Sanjeet Kumar

Custom Report using Metrics of Instance and Server

Hello
I need to create a custom report using different instance and server metrics like:
File System Space Available
Tablesapaces
Database Spaces usage
Sort in Memory
library Cache Hit
Data Dictionary Hit
Buffer Cache Hit
I already made the report, but I can´t change the size of the graphic (for a better presentation on my report)....
Do you know how can I change the size of the report?
I think that I´m using a "metric" so for that reason I Can´t change the size ... :(

I am currently having a problem with this report and drilldown to KSB1, the cost centers selected int S_ALR_87013611 are not transferring to KSB1 and thus all the cost centers come up in the call to KSB1, are you experiencing this problem? I am on V4.7

DB Control and custom reports

Similar Messages

Maybe you are looking for