Standard and customized reports

Experts,
I'm given a requirement to create some reports. Was hoping someone can help me with which are standard and customized reports from this list :
OPEN PURCHASE ORDER REPORT
OPEN REQUISITION REPORT
OPEN RFQ REPORT
PURCHASE ORDER CONFIRMATION REPORT
STOCK ITEMS RE-ORDER
STOCK ITEMS RESERVED
STOCK ITEMS ABOVE STOCK MAX
STOCK ITEMS BELOW STOCK MIN
STOCK ITEMS DETAILS
STOCK ITEMS INVENTORY CONTROL
STOCK ITEMS LIST BY NUMBER
STOCK ITEMS MOST USED
STOCK ITEMS NOT USED
STOCK ITEMS ORDER BY COST
STOCK ITEMS ORDER BY LOCATION
STOCK ITEMS ORDER BY VENDOR
STOCK ITEMS OVER RESERVED
STOCK ITEMS STATUS
STOCK ITEMS VALUE
VENDOR PERFORMANCE REPORT
Regards,

Hi,
SAP Std. Reports     Description                                                                          Z-Dev
ME2N / ME2M / ME2L     OPEN PURCHASE ORDER REPORT     
ME5A                          OPEN REQUISITION REPORT     
ME4N / ME4M / ME4L     OPEN RFQ REPORT     
ME2A / VL06I     PURCHASE ORDER CONFIRMATION REPORT     
MB53                          STOCK ITEMS RE-ORDER                                                     ABAP Report
MB24 / MB25                          STOCK ITEMS RESERVED     
                          STOCK ITEMS ABOVE STOCK MAX                                ABAP Report
                          STOCK ITEMS BELOW STOCK MIN                                ABAP Report
MMBE / MB52     STOCK ITEMS DETAILS     
MC.1 / MC.9                           STOCK ITEMS INVENTORY CONTROL     
MMBE / MB52     STOCK ITEMS LIST BY NUMBER     
MC46                           STOCK ITEMS MOST USED     
MC50                           STOCK ITEMS NOT USED     
ME2N / ME2M / ME2L     STOCK ITEMS ORDER BY COST     
ME2N / ME2M / ME2L     STOCK ITEMS ORDER BY LOCATION     
ME2L                          STOCK ITEMS ORDER BY VENDOR     
MB24/MB25                           STOCK ITEMS OVER RESERVED                                        ABAP Report
MMBE/MB53                           STOCK ITEMS STATUS     
MB52                           STOCK ITEMS VALUE     
ME6H                           VENDOR PERFORMANCE REPORT     

Similar Messages

  • Export standard and Custom report to xls / word / power point ??

    Hi
    Apps: 12.1.3
    DB 11gR1
    Is there any tool so that i can save standard and Custom report to xls / word / power point ??
    Thanks
    Vishwa

    There are a few third party tools that let you do that.
    Some such tools are Monarch, Rep2excel etc.
    Google for "convert oracle report to excel" and you will get a few more hits.
    The best way to get it in Excel is to change the output format to XML and write a quick XML publisher template.
    Hope this helps
    Sandeep Gandhi
    Independent Consultant

  • Standard And Customized BEx Reports & workbooks for the Modules FI,SD,MM

    Hi..All
    Can any one explain about Standard and customized BEx Reports and workbooks which were frequently used in implementation projects for the modules SD,MM and FI?
    Thanks & Regards
    Jonn

    Hi John,
    Find below some of FI(AP) queries....
    1.Accounts Receivable: Payment History -0FIAR_C05_Q0001
    2.Accounts Receivable: Overdue Analysis -0FIAR_C03_Q0005
    3.Accounts Receivable: Days Agreed / Days Taken -0FIAR_C03_Q0001
    you can find some queries in help.sap.com
    I don;t remember the queries used for other modules...you can refer the below link and identify the queries most usefull for your requirements...
    help.sap.com/bw
    thanks,
    vachan

  • How to find all those list of SAP standard and custom objects that are changed from a specific point of time

    Hi all,
    Please let me know the process to track or find all the SAP Standard and custom objects. that got changed from a specific point of time.
    Is there any function module or any table where this change log is maintained.?
    I just only need the details ,wheather that SAP standard or Custom object has got changed or not.
    Thanks in advance

    Hi RK v ,
    I really don't know what your actual requirement is , but if you want to know the objects as per the modification , then transport request will be much help to you .
    Have a look into table E070 and E071 .
    Regards ,
    Yogendra Bhaskar

  • Ageing wise vendor  and customer report

    hi....
    Where i can get ageing wise vendor  and customer report?
    Thanks & Regards
    Rekha shrama

    Hello
    First configure credit management & customise.
    A/R Summary
    Degree of ageing
    You can set the allowed degree of ageing in Customizing for Sales, under Basic Functions ® Credit Management/Risk Management ® Credit Management ® Define Automatic Credit Control.
    Under Checks in financial accounting/ old A/R summary, you can enter the permitted degree of ageing for the A/R summary, in the fíelds Permitted days and Permitted hours. Here, you can define how old the A/R summary can be, in order to be called up for a check. If the permitted degree of ageing for the A/R summary is exceeded in the credit check, then the document is blocked.
    Fields allowed days and allowed hours are only available for entry if you have entered an X in field Read A/R Summary in Customizing. The path is: Accounts Receivable and Accounts ® Credit Management ® Credit Control Account ® Make basic settings for credit management.
    Updating
    The A/R summary is either sent periodically (with the help of the report RFCMCRCV) from central Financial Accounting to the decentralized Sales and Distribution units according to ALE distribution model or, if an obsolete A/R summary is presented, updated for the credit check by the system per remote function.
    In order that the system is burdened as little as possible, SAP recommends you stick to the following order:
    Program run: Incoming payments in central FI
    Program run: Distribution A/R summary from central FI to decentralized Sales and Distribution units
    Program run: Renewed credit check for blocked sales documents in decentralized Sales and Distribution units
    Status Management for Obsolete A/R Summary
    If the A/R summary is obsolete, the credit status Credit data obsolete is set. This means that the document is blocked, and appears in the credit representativeu2019s worklist. In Customizing for Sales, in the section Automatic Credit Control, for the single, aforementioned checks, for which FI data is necessary, you can define whether a warning appears in the obsolete data, or whether a status is set.
    If you are working with the A/R summary, and would like to re-process obsolete data, it is recommended that you set a status.
    Reg
    suresh

  • Standard and Customer Tasks

    Hi Experts,
    What is the main Difference between standard and customer taks.
    Both are created using transaction PFTC.
    So what is the significance of Standard Tasks.
    Thanks,
    Points will be rewarded for all helps.

    SAP documentation states the following differences between standard and customer task
    Standard Task:
    Cross-client, any plan version, no validity period
    Customer Task:
    Client-specific, plan version-specific, validity period
    They have also mentioned
    "To implement your own requirements, use only standard tasks. There will no longer be functional enhancements for customer tasks."
    So preferable to use Standard tasks for all developments..
    Thanks & Regards,
    Prasath N

  • How to move all the standard and adhoc reports from cube to multi provider

    How to move all the standard and adhoc reports from the basic cube to multi provider?
    i created this multiprovider to do the maintenence on the basic cube. for example the infocube physical partition, line item dimension and compression.
    what we decided to do is move all the Standard and ad-hoc reports from the basic cube to the multiprovider. How to do it? and make a copy of the basic cube and do the maintenence on the cube. please help.
    Thanks in advance sdn experts!

    Hi Les,
    This sounds good and one thing we try to always keep in mind when undertaking such activities is to always minimise the impact to the user and make the process as transparent to them as possible. So lets say you have your multiprovider and copied queries up in Prod, these queries will still pick up the data from the base cube.
    Now you need to make a copy of the base cube for some changes to the cube model, I would suggest that you copy the cube and make your changes on the copied cube itself. Then 9depending on the changes done) you can load data from Original Cube to New Cube. When this is being done, make sure that you change your queries to add a restriction on 0INFORPOV by Original Cube.
    After the load to the new cube is complete you can run reports restricted to each cube to verify the numbers. Then change the 0INFOPROV restriction in the queries to point to the New Cube and disengage the old cube from the multiprovider.
    Hope this helps...

  • Difference between AcroPDF.dll and Acrobat.exe while loading standard and  custom plug_ins

    Hi,
    I want to know the difference of behavior when AcroPDF.dll loading the PDF file in the internet explorer and Acrobat.exe application loading PDF in context of plug_ins developed by Adobe or Custom plug_ins using SDK.
    When I am loading PDF within Acrobat.exe all the plug_ins (Standard as well as Custom) loaded successfully and working fine but at the same time if I am loading a document within Internet Explorer, behind the scene internet explorer using AcroPDF.dll which is ActiveX for IE to load PDF and it is trying to load plug_ins (standard and custom) but some how my custom plug_in is destroyed or currpted and it is not working any more.
    I want to know how AcroPDF and Acrobat.exe using AcroExch.App class or using any other thing to load plug_ins?
    Thanks,
    Twinkle

    For this level of support, you join our developers/partners program and submit a formal support request.

  • OBIEE 11G and Custom Reports

    I went to a presentation the other day on the new 11G. One of the things they said was that if you have custom reports and custom subject areas, you will have to recreate them after you upgrade. The upgrade is supposed to wipe them out. I'm hoping I misunderstood.
    We keep all of our custom reports and dashboards in a folder in the catalog seperate from the out of the box dashboards.
    We have created new subject areas with our own naming standard seperate from the out of the box subject areas.
    When we upgrade, am I really going to lose all of the work we have already done? Will my dashboards go away? Will my reports disappear? Can I import them back somehow?
    Panic'd in KC,
    B

    Hi,
    But I'm still not sure if my custom reports are going to be upgraded too or if they will get deleted.Reports will not get deleted but some reports may not work properly....Lot of testing is to be done....
    From the blog....
    We cannot expect all the reports to start working out of the box immediately after an upgrade. Good amount of testing is required to make sure all the older queries of the most commonly used reports are working without any major issues. Also, not all the reports would get migrated seamlessly due to the significant changes across the versions which the utility cannot recognize.
    Regards,
    Srikanth

  • Firefighter 5.1 and custom reports

    We are not entirely happy with the reports FF 5.1 produces and we are not ready to upgrade to a newer release. Has anyone had any success creating any custom reports for FF 5.1?
    Thanks in advance for any help anyone can offer
    Dave Wood

    nevermind.  i found the fix.  https://discussions.apple.com/message/15682076#15682076
    ssh into the offending machine and type:
    sudo  /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -deactivate -configure -access -off
    sudo  /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -activate -configure -access -on -restart -agent -privs -all
    voila. see here for more: http://support.apple.com/kb/HT2370
    Summary
    Note: This document does not apply to ARD version 1.2 or earlier or versions 1.2.1 to 1.2.4. Apple Remote Desktop 2 or later include the "kickstart" command line utility. It allows you to install, uninstall, activate, configure, and restart components of Apple Remote Desktop without restarting the computer. You can configure all the features found in Apple Remote Desktop preferences.

  • GnuCash 2.6.6 and custom reports

    I've just spent a bit of time trying to figure out why 2.6.5 -> 2.6.6 had caused custom reports to fail. I'm not fluent with Guile or Scheme, and my custom reports are just hacks of files copied from those supplied with the package with help from GnuCash documentation.
    WIth a lot of trial and error, and a hunch that the fix for bug 619899 regarding how .scm files are processed was causing the problem (especially after following the link given in Comment 7 there re. the use of intltool/xgettext), I've got it working with "s/N_ /_ /", changing the format of all the internationalisation strings. All those which were part of the packaged .scm file needed to be changed, though, not just ones I'd entered.
    Does this make sense to anyone? As I say, I don't really know what I'm doing, so don't know if it's an Arch-specific problem, a bug with GnuCash or with another package that needs reporting, or an error on my part.

    NoOneImportant wrote:
    Thanks.
    I will be doing a reinstallation tomorrow morning because I think I screwed everything up.
    Here's another question.
    If I do a system update, which will install a kernel update, should I generate a new image using mkinitcpio?
    Better yet, should I just generate a new image upon doing a successful boot without the update?
    1. No, the install script for the kernel package will take care of building a new image.
    2. I really don't see any point in doing this either. It is true that there are times the image requires rebuilding (as stated above) but if you install with the newest iso you'll already have a working image upon boot.
    Have you tried 0.8-beta iso?

  • WBS Standard report and customized reports

    Hi Frnds
    we have one SAP standard reports for WBS elements ( plan/actual/variance) and one whichis customized project management report in Projects systems but both the reports are showing different balance.
    is there any particular reason for showing different balance for both actual and budget colum?
    plz reply asap
    thanks
    manish

    Hi,
    Thanks for reply...
    If u have any idea regarding other reports, please let me know...
    Thanks..

  • Vendor and customer report

    Is there any report which shows how much has been paid to vendors during a month and similarly received from the customers during the month?

    Hi,
    S_ALR_87012177 - Customer Payment History
    F.23 - Account Balances Customer
    S_ALR_87012085 - Vendor Payment History with OI Sorted List
    F.42 - Account Balances
    Hope this is clear if yes assign points.
    Regards,
    Sankar

  • Are these Standard and Customized elements???

    Hello friends,
    I am trying to duplicate the work of a consultant who is not working for us any more.
    I have copy and pasted the ZBAPIS and other data elements, structures etc.,
    When I try to activate I am getting some messages like some of the structures and elements etc. are not found. But they don't start with 'Z' and so I think they are standard. When I try to look for it on our server I am not able to find them at all.
    The error messages that I am seeing while activating these ZBAPI's.
    1. FORM "FILL_OUTPUT_RETURN" Doesn't Exist
    2. The field 'KOTD504' is unknown.
    3. The Dictionary structure or table "A642" is either not active or does not exist.
    Any response or feedback will be greatly appreciated.
    Thanks
    Ram
    Edited by: Ram Prasad on Jan 5, 2008 6:16 PM

    Hi Ram,
    You are doing good  but don't copy manually cut and paste. you have to copy with the copy command.
    Got to    -
    >    SE37 and type your Existed ZBAPI  click copy ( CTRL + F5)  button in formatting tool bar next to delete button it will ask new name and will ask all the structure and etc... you have put mark in check boxes and copy that in your own bapi   . in this case  you dont see any errors.
    if you give me brief i can help you out more.
    Thank you .
    Regards
    Ram

  • DB Control and custom reports

    Hi Gurus
    I have OEM DB control installed on 10203 db. Two questions :
    1. I am having hard time finding where standard reports are, can some point me to the right option ?
    2. Does OEM DB Control gives you the ability to create your own reports ?
    Thanks a lot
    Kanwal

    I could be incorrect on this ... but the capability you are describing is in the OEM Grid Control. I don't recall seeing it in the OEM DBConsole.

Maybe you are looking for