DB creation failure [RAC, Suse and 9i]

We have managed to install 9i on a 2 server Linux cluster. All indications are that both nodes and the shared storage are up and running correctly. When we use dbca to create a clustered database, both nodes show up as install options.
However, when we attempt to create the new database, the install fails each time at 55% with a message regarding the file location <db name>rawtemp. The error is ORA 1257 "Cannot reuse raw_temp; unknown file size".
We have deleted the database after it has failed, and also deleted and recreated the /dev/raw location as well as the actual logical volume, all without success. Does anyone have a suggestion.
Thank you in advance!

The post doesn't provide enough data to give you a definate answer, however, we cover the details of RAC installation and configuration in our new book, check it out at:
http://www.dba-oracle.com/bp/bp_book1_rac.htm
Did you make sure to set up the cluster manager software and watchdog software (or its equivilent, hangcheck, in 9.2?)
Mike Ault

Similar Messages

Regarding contact person creation from SAP SUS to SRM

Hi,
We are using Extended classic scenario and we are having SRM and SUS are in different clients.
When buyer, ticks the SRM vendor as Portal vendor. XML is getting triggered to SRM SUS and vendor is getting created there.
Also mails will be triggered to SUS admin. Once SUS admin changes his temporary ID and created the permanent ID and also create the temporary persons. XML is getting triggered to SRM and Business partners are getting created and linked to vendor.
But the issue is, users are not getting created in SU01D and also not linked to BP's.
We have maintained the setting below like this:
Logical system   XXXXXXXX
System Name          XXXXXXXXX
FM BPID               empty
Role                 ZXXXXXXXX:BIDDER_EHP1
F. Mod.: Create User BBP_USER_VENDOR_CREATE
F. Mod.: Change User BBP_USER_VENDOR_CHANGE
Could you please let us know, whether any settings need to maintained to create the user in SRM?
Regards
Venkatesh P

Hi Venkatesh,
in the same customizing, where you set the role and the function modules for user creation/change, the user synchronization must be enabled.
regards
Zoltan

Cannot install Grid control 11g because of repository creation failure

I cannot install Grid control 11g (on AIX6.1 and 11.2.0.1 database) because of repository creation failure with following log emschema.log.CREATE
2012-10-29 17:44:49,729 [Thread-190] ERROR emschema.17oypu8dqqrf7 - ERROR:FATAL Configuration Exceptions
Execution Exception
null
2012-10-29 17:44:50,162 [17oypu8dqqrf7] ERROR emschema.17oypu8dqqrf7 - Schema Action Failed
2012-10-29 17:44:50,163 [17oypu8dqqrf7] ERROR emschema.17oypu8dqqrf7 - java.lang.Exception: The last RCUModel exit status code is not SUCCEEDED.
2012-10-29 17:44:50,164 [17oypu8dqqrf7] ERROR emschema.17oypu8dqqrf7 - Schema Action Failed
2012-10-29 17:44:50,167 [17oypu8dqqrf7] ERROR emschema.17oypu8dqqrf7 - Running RCU Failed with Exception Trace
The last RCUModel exit status code is not SUCCEEDED.
and rcu.log:
RCU Logfile               : /ugp1apl/oracle/product/grid/middleware/oms11g/sysman/log/schemamanager/m_102912_0530_PM/m_102912_0530_PM.CREATE/rcu.log
RCU Checkpoint Object               : /opt/oracle/product/grid/middleware/oms11g/sysman/log/schemamanager//RCUCheckpointObj
Component schemas created:
Component               Status     Logfile
EM Repository Creation Configuration          Failed     /ugp1apl/oracle/product/grid/middleware/oms11g/sysman/log/schemamanager/m_102912_0530_PM/m_102912_0530_PM.CREATE/em_repos_config.log
EM Repository Init Configuration          Success     /ugp1apl/oracle/product/grid/middleware/oms11g/sysman/log/schemamanager/m_102912_0530_PM/m_102912_0530_PM.CREATE/em_repos_init.log
EM Repository Common          Success     /ugp1apl/oracle/product/grid/middleware/oms11g/sysman/log/schemamanager/m_102912_0530_PM/m_102912_0530_PM.CREATE/em_repos_common.log
2012-10-29 17:44:49.887 NOTIFICATION rcu: oracle.sysman.assistants.common.util.SilentMessageHandler::writeToLog: Repository Creation Utility - Create : Operation Completed
Database has 11.2.0.1 version and setup according installation guide(init parameters and so on...), what's wrong?
Edited by: mariok on Oct 31, 2012 2:11 AM

In install guide is written: http://docs.oracle.com/cd/E11857_01/install.111/e15838/install_em_exist_db.htm#CIAIGDIH
„No environment variable specific to Enterprise Manager Grid Control needs to be set prior to installation. The ORACLE_HOME and ORACLE_SID variables should not be set; Oracle directories should not appear in the PATH.“
When I'v set up following variables everything went fine:
ORACLE_HOME=/opt/oracle/product64/11.2.0.1
ORACLE_SID=UAGRID
PATH=/usr/java6_64/bin:/opt/oracle/product64/11.2.0.1/bin:/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:/usr/lbin:/root/MSP/bin:.:/usr/local/bin:/u1/oracle/SCRIPTS:/opt/oracle/product64/11.2.0.1/OPatch

MM-SUS and EBP-SUS in the same client

Hi experts
I have a doubt about implementationMM-SUS and EBP-SUS in the same client, If I send a PO from MM to SUS and after send a PO from EBP to SUS to the same vendor, the vendor will be able to see 2 POs with just one logon?
As I know when I replicate a vendor from MM to SUS a Business partner is created and when I replicate a the same vendor from EBP to SUS a new Business partner is created and are diferent BP so a user and pass diferent .
Thanks
Nilson

Hi Nilson,
If i understand your scenario, you'll replicate an existing R/3 vendor to EBP. The vendor will be a direct vendor in R/3 while the same would be used as for Indirects in EBP.
Well, when you replicate the R/3 vendor to EBP, the vendor has the R/3 link in the form of Backend Logical systen name in EBP.
So when you replicate the vendor from R/3 or EBP, there will be ideally only one entry for the vendor with references to R/3 and EBP systems.
Hope this clarifies your question.
Cheers,
Akash

Problems with creation of catalogue XPGrpwise and temporary

Problems with creation of catalogue XPGrpwise and temporary files.
I use GroupWise 8.01 and WinXP (SP2), OpenOffice 3.1.
Why at opening files in Library, temporary files are not created in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\XPGrpwise, and created in catalogue C:\Documents and Settings\Jon Smith\My Documents. That causes problems. How to change a situation that worked as it is necessary.
Catalogue XPGrpWise is created and leaves duly in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\.

Cvetaev,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Auto creation of Stor Location and Batch during stock upload via MI09

Hi Experts!
Please guide me to configure automatic creation of storage location and batch during stock count through mi09. Eg : I got material A in storage location 1000 and got batch 123 for this material. Then when i want to do the stock count, if i enter the storage location 2000 and batch 122 for this material, then system will auto create this storage location and batch in the master data.
I tried to configure it in OMJJ for storage location but it is not working. Please anyone guide me step by step how to configure it. Storage location and Batch.
Thanks.
Crystal.

hi
check this
Create Storage Location Automatically
In this step, you specify whether the automatic creation of storage location data is allowed for goods issues and transfer postings.
This is advisable if you work with negative stocks and a material's first movement may be an outward movement.
Note that the reversal movement for a goods issue, for example, movement type 202 or 262, is not considered as an issue but as a receipt. If you only use the automatic creation of storage location data for reversals of goods issues, you do not have to allow negative stocks.
You have to allow automatic creation per plant first of all. You then have to explicitly allow the creation of storage location data for each movement type.
The storage location data is only created if the quantity is posted to 'standard' storage location stock. It is not created for receipts into a special stock (for example, into sales order stock).
Default settings
The standard system is set in such a way that the storage location data is created automatically for all types of receipts (goods receipt with/ without reference, stock transfers, intial entry of stock balances, reversal of goods issues, etc.).
Activities
1. Enter for each plant whether the automatic creation of storage location data is generally allowed.
2. Specify the movement types for which storage location data is created automatically.

Creation of project definition and wbs element

I want creation of project definition and wbs element upto 4 level using bapis.
i am using transaction cj27,cj01,cj02
which function module to use for this??

Hi,
to create project definition with customer fields the BAPI you should use is : BAPI_BUS2001_CREATE
to create WBS elements with different levels and specific fields the BAPI you should use is BAPI_BUS2054_CREATE_MULTI
these bapi must be used in the sequence of call :
BAPI_PS_INITIALIZATION
BAPI_BUS2001_CREATE / BAPI_BUS2054_CREATE_MULTI
BAPI_PS_PRECOMMIT
BAPI_TRANSACTION_COMMIT
before using the bapi, you must apply OSS note :
637345 - Syntax error with enhanced PS tables
i sent you the oss note to your mail
please reward points if helpfull.

Problem during creation of shipment document and shipment cost document

Hi
My client facing problem during creation of shipment document and shipment cost document at the time of Batch Job
Delivery no 897654: goods issue on 30.11 at 13:22. Shipment on 30.11 (VT01N).
Shipment costs on 1.12 (VI01).
the problem is the shipment document get created on 30.11.2010 but the shipment cost document get created on 1.12.2010
pleas advice.

Hi,
Please check the batch job processing log.
As per my understanding, business requires to generate the Shipment & Shipment cost documents immediatley.
However there is some time between the documents creation time. I dont see any issue in the data or problem in the delivery docs Because system will not generate the shipment docs after 1 or 2 days if there is an issue with the data . There must be problem in the Batch Job.
Analyse the batch jobs and timing of the job process.
Let us know your feedback...
Best Regards,
MKumar

ROS (without SUS) and EBP in same client-Transferred BP status?

Friends,
We are working on SRM 7.
The ROS (without SUS) and EBP are implemented on the same SRM client.
In supplier registration process, when the accepted business partner is transferred from ROS to EBP, a supplier is correctly created in EBP client with the same business partner number, but the status of the transferred business partner is not updated from 'ACCEPTED' to 'RELEASED', hence there is risk that user can transfer the business partner again.
As per OSS note 857386, the status released is set automatically by the system when an accepted supplier has been distributed. Also the status is valid only for DISTRIBUTED suppliers, that is, ONLY for suppliers TRANSFERED through OPI.
I understand, if ROS (without SUS) and EBP are deployed on separate clients in same server then when the accepted business partner is transferred from ROS to EBP, system triggers an XI message to update the ROS business partner status to 'RELEASED'. Is my understanding right?
How do we update the transferred business partner status to RELEASED when ROS and EBP are on same client?
Regards,
Sandeep Parab
Edited by: Sandeep Meghashyam Parab on Apr 9, 2010 11:43 AM

Hi Sandeep,
I too have a requirement to implement ROS without SUS in SRM 7.0 PPS. Can you send the config guide or steps to follow both in the ROS side and in the SRM Side. Your kind help will be rewarded and highly appreciated.
with regards,
Freemind

Automatic creation of delivery ,pgi and billing as soon as ordrer is creat

Hai gurus,
Can we do automatic creation of delivery,pgi and billing as soon as order is saved.
Plz explain ?
Thanks in Advance
sameer

Hi sameer,
unless the standard program is modified you cannot do auto pgi. However batch jobs can help creating a delivery afer sales order. But incase WM is implemented then we can for the required delivery movment types create an automatic transfer order and confirmation. This brings us closer to some extent in the task. Then schedule again a job that does PGI.
can you please however explain the business need for auto pgi. It helps us to learn something as well.
regards
sadhu kishore

Multiple ZR2740w failures within one and half year

Hello,
i would like to ask you if it is "normal" for me to have this series of issues with my ZR2740w's (by normal i mean if this is typical problem for this model; i know it is not normal to have that many RMA) :
1) first ZR2740w (let's call it A, bought in December 2011) died completely one month after purchase, panel got replaced via the onsite warranty by a new panel (let's call it B; RMA at end of January 2012).
2) i bought a second ZR2740w (let's call it C) a half year later.
3) C died one month ago after a year (end of April 2013), got replaced by probably a new or refurbished panel (call this one D) :
http://www.youtube.com/watch?v=-NnHiEn42cM
4) D died today, same (or very similar) issue as C; i expect a replacement panel around Friday or next Monday :
http://www.youtube.com/watch?v=bU1wf7QsvWQ
I wonder if it is something at my side, but i can't imagine what, everything else works fine. Socket voltage is withing tolerance (voltage here in Slovakia should be 230V, my socket has 236V which is within the +/-5% tolerance), the issue happens using any of connections (DVI/DP), from any source (tried 2 different computers with 3 different graphic cards - 2x Intel in various computers, 1xNVIDIA), using different power cables. C died when used on Eaton UPS, D died when connected directly to the socket.
While i still have year and half left from the warranty of the older display and nearly 2 years of the newer one, i dislike this happening all the time, as it means i am usually one week without one of my displays, plus i can expect both displays dying within one year after the warranty expires, which is unacceptable for ~600€ display (that is around a half of my monthly salary).
PS: And i don't even mentoin the "running pixels" issue of B on certain backgrounds (gray, blue and similar darker colors) - the pixels are moving from top to bottom, from half to about 3/4 of the display width; this one can be seen mostly when i am closer than 40cm from the display, further away it is nearly invisible (it's hard to catch it on camera, i hope you can see it at the first half of the video) :
http://www.youtube.com/watch?v=zhiPDpSsa3g
PS2: And i am not sure i will be even able to ask for refund once the replacement for D dies again, as it would be the 3rd failure within warranty, but technically the whole panel gets replaced, so not sure if that law applies in this case... Plus it was replaced by an authorized HP service, not by the seller.

Just got a call from service centre, they will replace this display again, and if i get a 3rd failure within the warranty period they will refund me through the seller i bought the display from. Still can't understand why it happens, the only common thing between the failures of C and D is the power socket i get the power from (no issues with other devices connected to the same power line - LCD TV, AVR, two PC's, another ZR2740w, 23xi, Mac Mini), which i cannot change and not even the other ZR2740w has problems with.

Clarifications on EBP-SUS and MM-SUS Scenario

Hi !
We are planning to implement EBP-SUS and MM-SUS in one Client . Request you to help us on the following issues.
1. While the outbound messages will not have a problem from MM & EBP, how do we route inbound messages to MM & EBP effectively. Should be handle it in XI ?? If ues, what is the best criteria .
2. Since both the config guides for MM-SUS and EBP-SUS scenarios include transactions for transferring Vendor & Comapny Code data, how do we check duplication.For ex : if we transfer a Vendor from R/3 and subsequently try to transfer the same vendor from EBP , is there any inbuilt duplicate check ?
3. In MM-SUS, an ASN created in SUS creates an inbound delivery is created in MM. What would happen in case of EBP-SUS i.e when an ASN is created for an EBP PO ? We are on extended classic scenario ?
4.If you do a confirmation in EBP-SUS, will a GR be generated in both EBP and subsequently in MM.
Request yr help pl.
Regards

Hi
Welcome to world of SRM.
I guess, you must have got enough details in the SRM guides.
Anyways, better to understand the basics first,, before going in detail. I hope this will answer all your queries.
Refer to these links ->
Supplier Enablement
http://help.sap.com/saphelp_srm50/helpdata/en/cd/0e343e47fd6b2ee10000000a114084/frameset.htm
SUS-EBP Scenario
http://help.sap.com/saphelp_srm50/helpdata/en/06/0f343e47fd6b2ee10000000a114084/frameset.htm
SUS-MM Scenario
http://help.sap.com/saphelp_srm50/helpdata/en/39/0f343e47fd6b2ee10000000a114084/frameset.htm
Supplier Self-services
http://help.sap.com/saphelp_srm50/helpdata/en/25/99b13c48740d55e10000000a114084/frameset.htm
Procurement
http://help.sap.com/saphelp_srm50/helpdata/en/8e/e5623c046a9b67e10000000a11402f/frameset.htm
Users in SRM user Management
http://help.sap.com/saphelp_srm50/helpdata/en/cd/6313513813554e941a02a91540c29e/frameset.htm
Please try this SAP OSS notes as well to get System architecture details->
Note 982871 - Consulting services: supplier integration in SRM
963000 - Usage and release of SRM as AddOn to ECC in ERP2005
868192 - Consulting solution: SUS-MM (SUS-MMSRV) service procurement
573383 - EBP and SUS deployment variants
Also do read this ->
Check whether the roles delivered by SAP meet your requirements. If not, you can create new roles and assign transactions to them. We recommend that you copy standard roles and tailor them to your requirements.
All users assigned to a respective role are then allowed to carry out the transactions. If required, you can refine the authorization check on the tab page Authorizations.
Standard SAP Single-roles
SAP_EC_SUS_ADMIN_PURCHASER (for purchasing administrators - SAP Supplier Self-Services)
SAP_EC_SUS_BIDDER (for bidders - SAP Supplier Self-Services)
SAP_EC_SUS_DISPATCHER (for dispatchers - SAP Supplier Self-Services)
SAP_EC_SUS_INVOICER (for invoicers - SAP Supplier Self-Services)
SAP_EC_SUS_ORDER_PROCESSOR (for order processors - SAP Supplier Self-Services)
SAP_EC_SUS_MANAGER (for managers - SAP Supplier Self-Services)
SAP_EC_SUS_SERVICE_AGENT (for service agents - SAP Supplier Self-Services)
If you want to use SAP Supplier Self-Services, proceed as follows:
1. Select one of the following single roles:
SAP_EC_SUS_ADMIN_PURCHASER
SAP_EC_SUS_ADMIN_VENDOR
SAP_EC_SUS_BIDDER
SAP_EC_SUS_DISPATCHER
SAP_EC_SUS_INVOICER
SAP_EC_SUS_MANAGER
SAP_EC_SUS_ORDER_PROCESSOR
SAP_EC_SUS_PRODUCT_MANAGER
SAP_EC_SUS_SAR_PROCESSOR
SAP_EC_SUS_SERVICE_AGENT
SAP_EC_SUS_SERVICE_MANAGER
2. Choose Change Roles.
3. Choose the Personalization tab page.
Note: The personalization applies to all roles, meaning the user can also create his own roles, for example copying the delivered SAP SUS roles. He can tailor these roles to his requirements by changing the SUS-specific attributes (BBP_SUS_ROLE_ATTRIBUTES).
1. Select the entry BBP_SUS_ROLE_ATTRIBUTES (SUS-specific role attributes).
2. Choose Change values.
A dialog box for maintaining SUS-specific roles appears.
3. If required, perform the following steps:
If the role should be displayed in the SUS User Management (UM) and should be able to be assigned to the relevant user by the supplier administrator, set the indicator to display the role in SUS UM.
If the user should be displayed as a service agent for the purchaser, set the Service agent indicator.
If you want to define the user as an SRM administrator, set the SRM administrator indicator. The user is then authorized to change all supplier data.
If want to assign the role SUS administrator automatically to the user during registration, set the SUS administratorindicator.
Sets the relevant indicators if you want users to receive the following notifications: Notification If Purchase Order Not Opened, Notification If Purchase Order Response Is Missing, Notification If ASN Is Missing, Notification If ConfirmationIs Missing, Notification If Invoice Is Missing,
Do let me know.
Regards
- Atul

Oracle 11gR2 RAC VM and SCAN and DNS and /etc/hosts (two) setup questions

Hi,
I am looking forward to setting up two Oracle 11gR2 RAC instances
on my Oracle VM test machine.
I plan on using the Oracle 11gR2 RAC VM template.
I want the final Oracle 11gR2 RAC instances to have SCAN that uses DNS.
The DNS will be pre-installed in the JeOS.
My first simple question about the setup is the following.
In my DNS name file, for example,
/var/named/chroot/var/named/milkyway.univ.db
do I need to provide the racnode1 and racnode2 information,
for example,
# DNS name file (snippet)
myjeos IN A 192.168.1.150
racnode1 IN A 192.168.1.161
racnode1-vip IN A 192.168.1.163
racnode2 IN A 192.168.1.162
racnode2-vip IN A 192.168.1.164
rac-scan IN A 192.168.1.131
rac-scan IN A 192.168.1.132
rac-scan IN A 192.168.1.133
Or, can I just provide only the rac-scan information
# DNS name file alternate (snippet)
myjeos IN A 192.168.1.150
rac-scan IN A 192.168.1.131
rac-scan IN A 192.168.1.132
rac-scan IN A 192.168.1.133
What I am getting at is the following.
Within the install process, will racnode1, racnode1-vip, racnode2,
and racnode2-vip host names and their IP address be written
to the RAC instances /etc/hosts files? (So I should not bother
to put them in the DNS name file like '# DNS name file alternate (snippet)'?)
Or, should I put the racnode and racnode-vip host names and IP addresses
in the DNS name file like '# DNS name file (snippet)'?
The second question is the following.
Are the cluster name and the scan name allowed to be different?
Currently, I would plan them to be different,
for example, rac-cluster and rac-scan.
Or, are they required to be the same,
for example, rac-cluster and rac-cluster.
Thank you.
AIM

AIM wrote:
do I need to provide the racnode1 and racnode2 information,
Or, can I just provide only the rac-scan information You need to provide all of it in DNS, because other hosts in your network will need to be able to resolve all of the normal, VIP and SCAN addresses for your RAC nodes. We write this data out to /etc/hosts just to reduce the amount of round-trip DNS requests the cluster nodes make for themselves.
Are the cluster name and the scan name allowed to be different?They can be different.

RAC issues and mostly asked Interview questions

Hi Gurus,
It would be great if someone shares some RAC issues and mostly asked questions.
Thanks in advance.

Hi,
You can also refer to the following note.
RAC and Oracle Clusterware Best Practices and Starter Kit (Platform Independent) (Doc ID 810394.1)
It has references to many useful information.
Thank you.

SUS and SRM

Hi Gurus,
Have a very fundamental query.It has been confusing me a bit.
We have implemented SRM 4.0 and have R/3 4.6c as the backend system.
Now,the proposal is to add SUS to the landscape.My questions:
Q1.]Is SUS an add-on to SRM or a separate insatallation/server?
Q2.]In SRM IMG,we have SUS node and some configuration(master data,BADI's,Technical settings etc)...what does this mean?If SUS is a separate install,will i still get the SUS nodes in SRM?
Q3.]We are planning a MM-SUS scenario.If SUS is a separate install,do we have to make any settings on SRM side?
Please direct me.
Thanks
Trey

Hi Christophe,
I have a query related to SUS. We have installed SUS on a seperate server for Production. NOw we have also put C folders as Add-on to SUS and never faced any errors.
We had followed these steps:
Install oracle
Install Oracle patch
Install PSU ABAP was
Activate TMS
Apply new SPAM,support packages and upgrade PI_Basis from 2004 to 2005.
Install C_projects
Apply C_project support packages
Log on to system and create client 100 with a client copy of 000 using SAP_ALL profile.
Install PSU Java WAS in client 100
Apply Java Support 16 to system
But now some are asking us to rebuild this server as we have not followed correct procedure as per them. They have given these steps. That is:
Install oracle
Install Oracle patch
Install PSU ABAP WAS
Log on to system and create client 100 with a client copy of 000 using SAP_ALL profile.
Install PSU Java WAS in client 100
Install C_projects using SAINT
Activate TMS in proper domain
Apply new SPAM,support packages and upgrade PI_Basis from 2004 to 2005.
Apply Java Support 16 to system.
Can u kindly help me out in this regard.
Thanks in advance
rgds,
Chaitra

DB creation failure [RAC, Suse and 9i]

Similar Messages

Maybe you are looking for