Db hangs when we create a type

hi,
1. In db i have a type created with:
CREATE OR REPLACE TYPE type_parent AS OBJECT (
f_parent_name VARCHAR2 (100)
NOT FINAL;
2. There are many objects (type_child1, type_child2...) which extend this type
3. There is a Queue defined in the db with type: type_parent and its started
4. When i create a new type as:
CREATE OR REPLACE TYPE type_child under type_parent(
f_child_name VARCHAR2 (60),
The db hangs for indefinite time.
We tried stopping the queue still the same is the issue.
When we restart the db the new type is being created fine.
Any idea what could have gone wrong? any ideas / pointers would be appreciated.
regards,
ravi

Hi,
As you stated the DB hangs, AFAIK, try to stop the queuing the Parent type for while, since the type is inuse with respect to the Queue (with respect to Table which dependent on that). Until that Sessions which using the Queue is not Cleared it would would hang. Since there would be Enqueue created on the Object. So, when you restart the DB or instance the Enqueue will get cleared and new child type is created with out any Issue. That might be internally happening (I doubt it). Try to Check that
Further Reference : http://www.akadia.com/services/ora_advanced_queueing.html
- Pavan Kumar N

Similar Messages

  • Why need message type when u create data type...

    why need message type when u create data type...

    Hi,
    A message type comprises a data type that describes the structure of a message. At the following points in SAP Exchange Infrastructure you can refer to the message to be exchanged at runtime by using the message type:
    ·        More than one message interface can use the same message type. For example, an asynchronous outbound message interface and an asynchronous inbound message interface can reference the same message type because the request message does not need to be mapped.
    ·        When defining a message mapping you can directly reference message types to map messages from an outbound interface to messages from a receiver interface.
    For technical reasons, a data type is not sufficient to describe the instance of a message. In XML schema, data types are defined as abstract types that are not yet fixed to an element. You can only describe an instance of a message when you have specified a data type as an element type. Therefore, a message type defines the root element of a message.
    A message type does not define the direction of the message exchange, in other words, whether it is a request or a response. In exceptional cases you can use the same message type for both the request and the response message.
    A message type has the following characteristics:
    ·        It comprises exactly one data type, which determines the content of the message to be transferred.
    ·        It is identified by a name and an XML namespace. The name (together with the namespace) of a message type is located in the uppermost tag of the message to be exchanged. This is an element tag.
    You have defined a message type GreetingRes that references a simple data type of type xsd:string. The XML namespace of the message type is http://sap.com/xi/myExample. The corresponding payload might look like this:
    <?xml version="1.0" encoding="utf-8" ?>
    <ns1:GreetingRes xmlns:ns1="http://sap.com/xi/myExample"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
       Hello Mrs. Miller
    </ns1:GreetingRes>
    You can specify how a message type is used in more detail in the description
    hope this will help you.
    regards
    Aashish Sinha
    PS : reward points if helpful

  • Element VS attribute in IR when we create data type.

    hi guruz,
    when we make data type in  IR ,and while creating node ,according node we give type(Element ,attribue etc).
    what is diff between element and attribute.
    please help me
    warm regards.

    Hi,
    You create complex data types using elements and attributes in the XSD editor
    Element
    Create structured data types. Elements that have a type cannot contain subelements.
    Example Instance
    <myElem>
      <f1> Value of f1 </f1>
      <f2> Value of f2 </f2>
    </myElem>
    Attribute
    Add attributes to elements. Attributes cannot usually have subnodes.
    Example Instance
    <myElem myAttr="AttributeValue">
      Element Value
    </myElem>
    You can flag an attribute as optional or required in the Occurrence column. These values mean the same for elements with an occurrence of 0..1 or 1. The only difference between elements and attributes is that attributes cannot have subnodes and that the same attribute cannot be used more than once in an element.
    Hope this will clarify you.
    Regards
    Aashish Sinha
    PS : reward points if helpful

  • Firefox 4 seems to hang when I try to type in the address bar...

    I have Windows 7, Firefox 4.0, and am trying F-Secure Internet security 2011 trial. My issue is when I am browsing, quite often when I am typing in the address bar or search bar nothing happens. I cannot highlight the text or anything. I have figured I have to wait about 10 seconds for it to clear. Or I can close the browser and reopen and it works.
    This is annoying. Is this a Firefox issue or a F-Secure issue? I installed both 4.0 and the F-Secure trail at the same time.

    Do a malware check with a few malware scan programs.
    You need to use all programs because each detects different malware.
    http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    http://www.superantispyware.com/ - SuperAntispyware
    http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • Error when trying to create a types jar from a web service WSDL

    Hi,
    I generated a WSDL from a web service. When I try to generate a types jar from that WSDL in another project, I get an error:
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    com.bea.workshop.webservices.servicecontrol.ui.except.TypeGenerationFailedException: Buildfile: C:\eclipsews\.metadata\com.bea.workshop.webservices.servicecontrol.ui\build-dir\build.xml
    Trying to override old definition of task wsgen
    build:
    build-types:
    clean-types:
    [echo] Deleting types directory c:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474
    [echo] Deleting types jar C:\eclipsews\AAATest\WebContent\WEB-INF\lib\CaregiverEBillingMasterServiceServiceTypes_xmlbeans_apache.jar
    [mkdir] Created dir: C:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474
    generate-src-code:
    [echo] Generating types of family xmlbeans_apache from WSDL at file:/C:/eclipsews/AAATest/src/test/CaregiverEBillingMasterServiceService.wsdl, all services. Outputting to c:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474
    [typesGen] Generating complex Java types for schema types in WSDL file:/C:/eclipsews/AAATest/src/test/CaregiverEBillingMasterServiceService.wsdl. Outputting to C:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474 ...
    [typesGen] [WARNING] Generating array which is non-compliant with JaxRPC 1.1 for XML name: t=ArrayOfTreatmentDetailItem@http://org/abc/claims/caregiver/ebilling/services
    [typesGen] [WARNING] Generating array which is non-compliant with JaxRPC 1.1 for XML name: t=ArrayOfDocumentTypeAutoPayWrapper_literal@java:org.abc.claims.caregiver.ebilling.services.util
    [typesGen] [WARNING] Generating array which is non-compliant with JaxRPC 1.1 for XML name: t=ArrayOfJavaLangint_literal@java:org.abc.claims.caregiver.ebilling.services
    [typesGen] [WARNING] Generating array which is non-compliant with JaxRPC 1.1 for XML name: t=ArrayOfDocumentSubmissionHierarchy@http://org/abc/claims/caregiver/ebilling/services
    [typesGen] [WARNING] Generating array which is non-compliant with JaxRPC 1.1 for XML name: t=ArrayOfMessageCode@http://org/abc/claims/caregiver/ebilling/services
    [typesGen] [WARNING] Generating array which is non-compliant with JaxRPC 1.1 for XML name: t=ArrayOfFeeCodeType@http://org/abc/claims/caregiver/ebilling/services
    [typesGen] [WARNING] Generating array which is non-compliant with JaxRPC 1.1 for XML name: t=ArrayOfBatchMessage@http://org/abc/claims/caregiver/ebilling/services
    [typesGen] [WARNING] Generating array which is non-compliant with JaxRPC 1.1 for XML name: t=ArrayOfArrayOfJavaLangstring_literal@java:org.abc.claims.caregiver.ebilling.services.util
    [typesGen] [WARNING] Generating array which is non-compliant with JaxRPC 1.1 for XML name: t=ArrayOfJavaLangstring_literal@java:org.abc.claims.caregiver.ebilling.services.util
    compile-src-code:
    [echo] Compiling source files from c:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474 to c:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474
    [javac] Compiling 298 source files to C:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474
    [javac] ----------
    [javac] 1. ERROR in C:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474\com\abc\claims\caregiver\ebilling\FeeCodeDocument.java (at line 51)
    [javac]      public static com.abc.claims.caregiver.ebilling.FeeCodeDocument parse(java.lang.String xmlAsString) throws org.apache.xmlbeans.XmlException {
    [javac]      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    [javac] No exception of type XmlException can be thrown; an exception type must be a subclass of Throwable
    [javac] ----------
    [javac] 2. ERROR in C:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474\com\abc\claims\caregiver\ebilling\FeeCodeDocument.java (at line 54)
    [javac]      public static com.abc.claims.caregiver.ebilling.FeeCodeDocument parse(java.lang.String xmlAsString, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException {
    [javac]      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    [javac] No exception of type XmlException can be thrown; an exception type must be a subclass of Throwable
    [javac] ----------
    [javac] 3. ERROR in C:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474\com\abc\claims\caregiver\ebilling\FeeCodeDocument.java (at line 58)
    [javac]      public static com.abc.claims.caregiver.ebilling.FeeCodeDocument parse(java.io.File file) throws org.apache.xmlbeans.XmlException, java.io.IOException {
    [javac]      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    [javac] No exception of type XmlException can be thrown; an exception type must be a subclass of Throwable
    [javac] ----------
    [javac] 4. ERROR in C:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474\com\abc\claims\caregiver\ebilling\FeeCodeDocument.java (at line 61)
    [javac]      public static com.abc.claims.caregiver.ebilling.FeeCodeDocument parse(java.io.File file, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException, java.io.IOException {
    [javac]      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    [javac] No exception of type XmlException can be thrown; an exception type must be a subclass of Throwable
    [javac] ----------
    [javac] 5. ERROR in C:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474\com\abc\claims\caregiver\ebilling\FeeCodeDocument.java (at line 64)
    [javac]      public static com.abc.claims.caregiver.ebilling.FeeCodeDocument parse(java.net.URL u) throws org.apache.xmlbeans.XmlException, java.io.IOException {
    [javac]      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    [javac] No exception of type XmlException can be thrown; an exception type must be a subclass of Throwable
    [javac] ----------
    [javac] 6. ERROR in C:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474\com\abc\claims\caregiver\ebilling\FeeCodeDocument.java (at line 67)
    [javac]      public static com.abc.claims.caregiver.ebilling.FeeCodeDocument parse(java.net.URL u, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException, java.io.IOException {
    [javac]      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    [javac] No exception of type XmlException can be thrown; an exception type must be a subclass of Throwable
    === snipped here due to huge file size ===
    [javac] 2680. ERROR in C:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474\org\xfa\schema\xfaData\x10\SignatureDocument.java (at line 99)
    [javac]      public static org.xfa.schema.xfaData.x10.SignatureDocument parse(org.apache.xmlbeans.xml.stream.XMLInputStream xis, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException, org.apache.xmlbeans.xml.stream.XMLStreamException {
    [javac]      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    [javac] No exception of type XmlException can be thrown; an exception type must be a subclass of Throwable
    [javac] ----------
    [javac] 2681. ERROR in C:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474\org\xfa\schema\xfaData\x10\SignatureDocument.java (at line 103)
    [javac]      public static org.apache.xmlbeans.xml.stream.XMLInputStream newValidatingXMLInputStream(org.apache.xmlbeans.xml.stream.XMLInputStream xis) throws org.apache.xmlbeans.XmlException, org.apache.xmlbeans.xml.stream.XMLStreamException {
    [javac]      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    [javac] No exception of type XmlException can be thrown; an exception type must be a subclass of Throwable
    [javac] ----------
    [javac] 2682. ERROR in C:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474\org\xfa\schema\xfaData\x10\SignatureDocument.java (at line 107)
    [javac]      public static org.apache.xmlbeans.xml.stream.XMLInputStream newValidatingXMLInputStream(org.apache.xmlbeans.xml.stream.XMLInputStream xis, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException, org.apache.xmlbeans.xml.stream.XMLStreamException {
    [javac]      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    [javac] No exception of type XmlException can be thrown; an exception type must be a subclass of Throwable
    [javac] ----------
    [javac] 2682 problems (2682 errors)
    BUILD FAILED
    C:\eclipsews\.metadata\com.bea.workshop.webservices.servicecontrol.ui\build-dir\build.xml:73: The following error occurred while executing this line:
    C:\eclipsews\.metadata\com.bea.workshop.webservices.servicecontrol.ui\build-dir\build.xml:107: The following error occurred while executing this line:
    C:\eclipsews\.metadata\com.bea.workshop.webservices.servicecontrol.ui\build-dir\build.xml:181: Compile failed; see the compiler error output for details.
    Total time: 17 seconds
         at com.bea.workshop.webservices.servicecontrol.ui.util.TypesGenerationScript.run(TypesGenerationScript.java:197)
         at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:113)
    Caused by: org.eclipse.core.runtime.CoreException: C:\eclipsews\.metadata\com.bea.workshop.webservices.servicecontrol.ui\build-dir\build.xml:73: The following error occurred while executing this line:
    C:\eclipsews\.metadata\com.bea.workshop.webservices.servicecontrol.ui\build-dir\build.xml:107: The following error occurred while executing this line:
    C:\eclipsews\.metadata\com.bea.workshop.webservices.servicecontrol.ui\build-dir\build.xml:181: Compile failed; see the compiler error output for details.
         at org.eclipse.ant.core.AntRunner.handleInvocationTargetException(AntRunner.java:451)
         at org.eclipse.ant.core.AntRunner.run(AntRunner.java:383)
         at com.bea.workshop.webservices.servicecontrol.ui.util.TypesGenerationScript.run(TypesGenerationScript.java:185)
         ... 1 more
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    I was previously able to generate a types jar just fine from the web service's WSDL. Recently, I made some changes to the web service. Apparently, these changes to the web service now cause the WSDL to be unparseable when trying to generate types jars.
    Any ideas?

    The WSDL is generated from my web service. I made heavy revisions to my web service which, in turn, affected the resultant WSDL. The changes I made to my web service were almost exclusively related to object substitution. For example, prior to the change I was referencing object A from my web service; after the change, I was referencing object B. The objects that I'm referring to are XMLBeans, if that matters. I can't really describe it more than that without actually showing you the WSDL.
    I would post the WSDL file here to allow you to try to create a types jar out of it, but the WSDL exceeds the 30000 character limit for this field. There is no way for me to attach the WSDL to this post.

  • Windows 7 hangs when creating a new folder and hangs again when renaming it.

    Ok, so I have a problem where Windows 7 hangs when creating a new folder and hangs again when renaming it.
    I have documented this problem on my blog here:
    Windows 7 hangs when creating a new folder and hangs again when renaming it Rhyous's 127.0.0.1 or ::1
    This has my hardware details, etc...
    I consider myself an expert at troubleshooting (being in support for over 10 years including time as a Lead Technician doing Windows 2000 support focussing on performance), and have checked quite a few things to try to pinpoint this issue, but I just can't find the cause.
    I am asking others if they have seen this issue. I need to know if it is only on my workstation, or if others are seeing it as well.
    Have you ever right-clicked, chose new folder and then had to wait 45 seconds for a new folder to appear.
    Then the same thing when you try to rename the new folder, a hang of about 45 seconds before the new name take affect.
    Anyway, let me know if you have experienced ths.

    Hi,
    I suggest you temporarily uninstall the antivirus program to check the issue. You need to make sure that you have the installation file to reinstall it later.
    If it does not work, I suggest you also test the issue in Safe Mode and Clean Boot to determine if this is a hardware or a software issue.
    Good luck!
    Arthur Li - MSFT

  • System hanging when i try to display or change or create a function module?

    Hi Experts,
    My system is hanging when i try to display or change or create a FM using SE37 transaction. I am able to execute SE37 transaction but when i give a FM name which is already existing, the system is getting hanged up. If i give a FM which is not present in the system and try to display it, it gives an error "FM does not exists". I have unistalled the SAP logon and reinstalled it again and restarted my system but still this problem is encountered.
    Can any one please help me in this issue??
    Thanks a lot in Advance!
    Regards,
    Lakshman.

    Hi Prasad,
    Go to se38 transaction and look at  UTILITIES-> Settings-> ABAP editor-> Change front-end editor to old(if it is new) and check once. Hope this solves your problem becuase this is what i have done for my problem and let me know whether the problem has been solved.
    Regards,
    Lakshman.
    Edited by: lakshman reddy G on Mar 5, 2009 5:54 PM

  • When I create an email signature, the text I type is repeated twice in the actual email sent (above and below a line).  How can I avoid this?

    When I create an email signature, the text I type is repeated twice in the actual email sent (above and below a line).  How can I avoid this?

    Try validating your installed fonts and fixing any errors that show up. To do this see this article: http://reviews.cnet.com/8301-13727_7-20085570-263/safari-in-os-x-lion-replacing- text-with-block-a-characters/

  • Frame hangs when creating PDF

    I'm running Frame 8, unstructured, on Vista. Also running Distiller 8.
    I have a book file and was creating individual PDFs of the chapters doing Save As PDF on each chapter. After three weeks of doing this Frame starts to hang when creating the PDFs. Nothing different in the files, just some editing of commas, mispellings etc. Sometimes just repaginating for page numbers. I noticed, strangely, that I first had to delete the old PDF, it wasn't overwritinng. Then that started hanging so I was changing the name of the file. Then changing the name wasn't working. 
    Frame was opening Distiller but it wasn't doing anything else. At some point it doesn't even open Distiller. Just hangs Frame. Doesn't matter if I reboot, it has no affect.
    Then, doing absolutely nothing, it starts working again ... for a while. There's nothing intricate about these files. They're pretty vanilla. Lots of text, a handful of tables (or not) and some graphics in eps or tif format.
    What is going on here?
    Dottie M.

    From everything I have read, it is better to Print to a PDF than to use Save As....and also set your default printer to pdf. Although some I have read use the Save As PDF, most don't agree. You can give it a shot anyway....
    ls

  • Japanese characters alone are not passing correctly (passing like ??? or some unreadable characters) to Adobe application when we create input variable as XML data type. The same solution works fine if we change input variable data type to document type a

    Dear Team,
    Japanese characters alone are not passing correctly (passing like ??? or some unreadable characters) to Adobe application when we create input variable as XML data type. The same solution works fine if we change input variable data type to document type. Could you please do needful. Thank you

    Hello,
    most recent patches for IGS and kernel installed. Now it works.

  • I have Dreamweaver CS3 on a PC with Windows Vista SP2. The program recently began to hang when opening previously created HTML files. How do I fix this?

    I have Dreamweaver CS3 on a PC with Windows Vista SP2. The program recently began to hang when opening previously created HTML files. How do I fix this?

    Hi rmarchione,
    Can you try restoring preferences and let us know if it helps?
    Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6
    Thanks,
    Preran

  • Delivery method when creating course type

    Hi,
      I am not getting the 'Delivery method' option when creating course type..it takes 'Class room' training by default always..
    I was getting this option 2 days before..Do i have to change some configs for this?
    Regards,
    Sharadha

    Hi Sharadha,
    I am facing the same problem.
    But despite adding Infotype 5007 for Object Type D in table T777I, the Delivery Method option is not appearing for me.
    It was appearing as long as LSO was activated in the system.
    But since my customer is not using LSO, we deactivated it. My customer is using TEM stand-alone (ECC6.0).
    I suspect this functionality is available only while using LSO.
    Let me know if you are aware of this.
    Thanks.

  • Service Type is lack when I create proxy service in workshop 10gr3??

    When I create proxy service in workshop(10gr3), at the General Configuration page, the "Service Type" is lack of "Create From Existing Service", the function is deleted?

    I posted the same request to the SOA forum.
    But here is the solution:
    Right click on the business service select OSB / Generate Proxy Service.
    To all the nice people form Oracle, please document it.
    thanks,
    Barossa

  • Help!!! - When Creating Customer  I get this ERROR "Provide a positive integer for minimum customer balance amount or percent when balance amount overdue type is amount or percent respectively."

    When Creating Customer  I get this ERROR "Provide a positive integer for minimum customer balance amount or percent when balance amount overdue type is amount or percent respectively."
    I tried troubleshooting when I saw the another post and created with a new customer profile class, but still getting an error, though I created another profile like below and attached this to another existing customer it worked, but when I tried creating a new customer it is still giving me the error. I am Using Oracle Applications R12.1.1
    Steps I followed in Creating a New customer Profile
    ==== Make sure the new Customer Profile class which you will create is in active state. Cross check below steps while defining a customer Profile class.. e.g. Name : DEFAULT (and it's active)
    *1) Profile Class Tab :*
    a) Balance FWD Billing : Not enabled
    b) Invoicing --> Tax Printing ( Summarize By Tax Name), Grouping Rule (DEFAULT)
    c) Set Terms as per ur requirement , do allow discount & Override terms
    d) Set Dunning as per your requirement,
    e) Filled in Collectors info as per your requirement with Credit Check enabled...
    f) Receipt --> Auto cash Rule set as 'Standard'..
    *2) Late Charge Profile* Set it as per requirement
    *3) Profile Class Amounts* e.g Say Currency set as "USD"
    a) Credit Limit : 100000
    b) Order Credit Limit : 100000
    c) Minimum Receipt Amount : 1.00
    d) Min statement amount : 1.00
    e) don't put any value in Exchange Rate type (e.g, monthly, Plan etc..)
    f) Minimum Customer Balance : Amount ------> Value: 5.00
    g) Minimum Invoice Balance : Amount ------> Value: 5.00
    h) Minimum Charge per invoice : 1, Maximum Charge per Invoice : 100 Under Interest Charge
    i) mention Type as Fixed Rate, Value : 10
    j) You can avoid setting the Penalty Charge for the time being..
    Step-2_ a) Open a customer ..*go to Bill to site details* --> Click on Profile Tab --> Under Profile Class field please include new profile class which is created by you (e.g DEFAULT) . b) Go to Profile Amounts Tab --> Click(Show) on Currency USD --> Verify the set up here as well   I could see this.
    When I tried creating an new Customer using the new profile, it's repeating the same error. Please help.

    Hi
    You get this error when profile class amounts are not set for all the currency.  Go back to your profile and ensure that the profile amounts are set for all the currencies found, whether you are using it or not.
    Regards

  • JDev hangs when creating copy rule

    Hi,
    I try to build a simple BPEL prototyp using beta3. Sometimes, when I create a copy rule, jdev just hangs and I have to kill it via task manager (win xp). I suppose this only happens with quite "long" variable names in the expression builder?
    Has anyone experienced these hangs?

    Hi,
    I started trying Beta3 only. Didn't check in Eclipse by now.
    My configuration is: win xp SP2 (up tp date), 1GB RAM, BPEL beta3.
    I tried to create a copy rule for a variable named: ReadDBParams_ReadParamsServiceSelect_OutputVariable
    This freezes jdev all the time. Then I renamed the variable to: ReadDBParams_OUT
    This seems to work.
    The long variable name doesn't make that much sense, but it was generated by a witard like that, so it should work... :-)

Maybe you are looking for

  • Reading the data from dataset

    Hi all, Can i read the Data from more than one Dataset at a time ? If yes.. How ? If not...Why ? Thanks in Advance Krish...

  • Server side function not get called after dispatching cairngorm event second time on same page

    Hi All, I am facing a urgent issue regarding cairngorm event. Actually my page contain 3 button add,delete,save and  clicking of any button I do the respected functionality. For ex: I click the add button & on clicking of add button I fire a cairngor

  • Help w/Photoshop Elements 8

    I'd say I'm a newbie when it comes to some aspects of Photoshop.  My camera shoots pictures, and when they're saved to my computer, they are huge!!!  4000 x 3000 pixels.  I want to resize both the image/canvas down to something reasonable, but I can'

  • [Solved] Starting systemd --user as a systemd --system process?

    Hey guys, I would like to run systemd --user as a system service using this .service file I wrote: $ cat [email protected] [Unit] Description=Systemd --user instance for %I Documentation=man:systemd [Service] User=%I ExecStart=/usr/lib/systemd/s

  • ORM CFC Generator error

    Hi I'm trying to get Coldfusion Builder's ORM CFC Generator to build my cfcs but when I click the Generate button after setting my table relationships I get the following error: Error : Event handler exception.. coldfusion.runtime.CfJspPage$Parameter