DB Link from target to stating_area

Hi,
I create a location for the target schema and the staging_area. In the target_schema I create a mapping which select data from tables in the staging_area. staging_area and target schema are in the same database.
OWB uses a database link to select data from tables of the staging_area for mappings in the target schema. But this is the problem. OWB should not use a db link.
How can I configure, that the mapping use only the schema and not the database link.
Example:
What OWB generate: "STAGING_AREA"."TAB_STA_XXX"@"BASIS.XXXXXX.DE@MOD_STAGING_AREA" "ALLG_PARAMETER";
What I want:
"STAGING_AREA"."TAB_STA_XXX" "TAB_STA_XXX";
There must be a possibility to configure it, but I can't find it.
Thanks for help
Carsten

I found the problem.
In one location the host was full qualified an in in the other location host was only with the short name.
After change on the same qualified host name OWB don't generate a DB Link.
Thanks
Carsten

Similar Messages

Firefox and Thunderbird do not communicate anymore : I can't open links from TB emails ( a href... ) and can't send mail from FF pages (mailto)

Hi there,
Please excuse me if a make a few mistakes, I am French ;)
I come here because firefox and thunderbird are not working together anymore. This is what happens :
- Firefox and Thunderbird are opened
- I click on a link in an email
- A few seconds after that a Firefox windows pops up. The title is : "Close Firefox", the content is : "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system."
Second case :
- Firefox is closed and Thunderbird is open
- I click on a link in an email
- A few seconds after that a Firefox windows pops up as expected. Firefox opens the link as expected but doesn't opens the other tabs as usual (when i start FF it re-opens previous tabs)
Third case :
- Firefox and Thunderbird are opened
- I click on a link to send an email (<a href="mailto:......@.....">)
- A few seconds after that a Thunderbird windows pops up. The title is : "Close Thunderbird", the content is : "Thunderbird is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system."
As in the second case, if TB is closed when i click on the mailto, TB opens properly and send the email.
If Internet Explorer is set as my default browser, it works fine for "Thunderbird -> link -> IE" but the "IE-> mailto -> TB" still doesn't work.
I already looked up for some answers on google but can't find something which works.
Thank you in advance for your answers.
Vincent

Check the target field in the Firefox desktop shortcut and make sure that you do not start Firefox with the -no-remote switch or have set the environment variable MOZ_NO_REMOTE=1 (Control Panel > System > Advanced > Environment variables).
Always make sure to start at least the default profile without the -no-remote command line switch.
If you need to have more than one profile open at the same time then start subsequent instances with the -no-remote command line switch.
You can not send links from other programs to a Firefox instance that is started with the -no-remote switch.
In such a case you need to drag links in a Firefox window or paste the link in the location bar.

Can I link from Interactive report Page 1 to Master Detail page 2?

Hi folks-
I know how to create a Page as an Interactive Report; it creates 2 pages automatically (primary page with the great interactive bar) and a 2nd page that's a single record.
I know how to create a Page as Master Detail, whereby I get a tabular list without the super interactive bar, and I can select a record, and get transported to a nice page with 2 regions (master on top, detail on bottom).
I want to have the First page from the Interactive Report, select the record, and go to the 2nd page of a MasterDetail.
Do I create the Interactive Report, and customize the 2nd page, to add a region?
Or, do I create both page types, and redirect from the 1st page of the Interactive Report to the DML Form from the MD report? I tried that, re-assigning the link from the Interactive Report to be a Link to Custom Target, and specify the page # of the Master-Detail page. And it is taking me to the right page, but the data from the selected row is not coming with me, and the detail in the bottom region is not appearing at all.
Can someone please give me a nudge as to the sequence I should be doing?
(As you can tell, I'm new to Apex.... I'm trying to use it to create a prototype or proof-of-concept for a database driven web application)
Thank you
Marion

Yes, I tried that after I wrote to you - and it's fine, but not what I'm after; it's only based on 1 table and I'm working with 2 tables.
Perhaps I can explain in better.
I want one page as an interactive tabular report (of the master records)
I want to select a row, and transfer to a page that has the corresponding row on top (as a form), and a tabular region below of records from a related detail table.
ie, I want page 1 from the Interactive Report, and page 2 of the Master Detail report.
OK - I just took the form page, and added a region below in a tabular report. And I'm getting the data, but I'm getting all the records (not just the ones associated with the single record on top. I figure I need to edit the Region Definition->Source (to specify that the id numbers need to match), but the code is not editable.....
So I am in Structured Query Attributes, and I've Modified the Join Conditions - but I still get all the detail records in the bottom region. I''m trying to add in the ( + ) qualifier, but it doesn't affect anything...
I'm soo close to what i'm trying to do!
Thank you for your continued patience and assistance
Marion
here's the Source I have for the region..... (I'm including the excess ID columns just for learning purposes)
SELECT
"PHONENUMBERS"."PHONE_ENTITY_ID" "PHONE_ENTITY_ID",
"ENTITIES"."ENTITY_ID" "ENTITY_ID",
"ENTITIES"."FIRSTNAME" "FIRSTNAME",
"ENTITIES"."LASTNAME" "LASTNAME",
"ENTITIES"."COMPANY" "COMPANY",
"PHONENUMBERS"."PHONE_ID" "PHONE_ID",
"PHONENUMBERS"."PHONETYPE" "PHONETYPE",
"PHONENUMBERS"."PHONENUMBER" "PHONENUMBER",
"PHONENUMBERS"."PHONECOMMENT" "PHONECOMMENT"
FROM
"PHONENUMBERS",
"ENTITIES"
WHERE ENTITIES.ENTITY_ID = PHONENUMBERS.PHONE_ENTITY_ID
Edited by: mtpaper on Oct 12, 2009 1:30 PM
Edited by: mtpaper on Oct 12, 2009 1:32 PM

Report links from one dashboard(report) to another dashboard with prompt

There are two dashboards ‘Chart’ and ‘Transaction details’ . I am trying to link from one report(dashboard called 'Chart') to another dashboard(Transaction details).
In first dashboard (screenshot 1) there is a column called ‘Day’ which is like date., I have set the navigate properties and pointed out the second dashboard as the target ( screenshot3).
In the second dashboard (screenshot 2) , the request has an prompt on the date column.
Requirement, Once I click on particular value on ‘Day’ column in first dashboard, it has redirect to the second dashboard. Having said that, it is not only enough to navigate but also pass the value as a parameter to the second dashboard.
Currently, it is successfully navigating to the second dashboard, but not passing the parameter. Is there any particular step that I have take care here.
By the way, the column which has prompt has be defined as ‘as prompted’ in its report.
Any inputs, ideas are appreciated.
Thanks and Regards
S
For some reason, I couldn't able to upload the screenshots that I took now in oracle forums.

Hi Saicand,
Thanks for you reply. What should I need to check at fx section of the column. Do you mean that the format of the date format should be the same for both the reports.
Thanks and Regards
S

In Firefox 5 links with target="_blank" don't open in new window or tab. Is there a way to make them do that?

I've search some info about this and it seems like there's a lot of people that are annoyed by links opening in new window/tab and that the 'target="_blank"' is not valid in strict XHTML. I'm guessing this could be reasons why Firefox 5 ignores the 'target="_blank"'. But in some cases you really want to open a new widow, in my case I'm using a flash application and want to open links in new windows from there and then the ctrl-click doesn't work. When opening the link in the same page and then go back the application is reloaded and it's state is lost. Probably should try to find out if there's some other way to open links from a flash application, but I'm wondering if there's a way to make Firefox 5 open 'target="_blank"' links in new tabs.

I don't know how to delete my question, anyway I'm not having this problem anymore. In our organisation the IT department deploy Firefox updates with certain settings and limitations, in the tap-options the checkbox for opening new windows in new tabs where checked but disabled. They made some changes to make this checkbox enabled and now it works as expected if it's check new windows open i new tabs and if it's not in new windows. They never opens in the same tab as they did before.

Link from a report to another report

Hi all,
I have created a report called GROUPS with GROUPNO as the first column. And I have another report based on SQL query that shows the details for a group and takes the GROUPNO as an input variable. I have created a link from the first report to the second report.
The problem is that when I run the first report, and when I click on the GROUPNO from the list of groups, the target report is called but no rows are selected. When I point the mouse cursor to one of the GROUPNO, and I look at the breowser status bar, I see that the p_arg_names containts the parameter name but the p_arg_values is empty.
Any help?

Hi Sharmila,
The mapping is already done and the p_arg_names in the status bar shows the p_arg_names=groupno , only the p_arg_values is not taking the value in the field groupno which cause the target report to fail.

How to keep links from being broken when moved or file is later split

Which is the best way to make sure that a link to another pdf file is not broken when a file is emailed or moved to a new location off of the server? Should you link a destination or use the hyperlink feature?
If the links are created and the file then has to be split, will the links be retained in the split files?

PDF moved —
PDF#1 has a link to PDF#2. To keep this link functional after putting PDF#1 elsewhere:
--| Relocate PDF#2 with PDF#1; maintaining the same path to the target of the link (which is PDF#2).
--| Or, use Acroat's link tool to modify the link in PDF#1 so that you establish a functional path to wherever PDF#2 is at.
For email, if PDF#1 & PDF#2 are adjacent to one another under some folder/directory & then linked you'd want to email both files together. Both PDFs can be saved &, provided they stay adjacent, the links will work.
PDF split —
PDF#3 has internal links (e.g., a link from PDF page 1 to some other PDF page in PDF#3).
You split PDF#3 by extracting the first 5 PDF pages & now have PDF#4.
Any links in PDF#4, to PDF#3 pages past page 5 will not function.
Use Acrobat's Link tool to modify the link such that it goes from PDF#4 to the desired page in PDF#4.
n.b., There are 3rd party plug-ins for Acrobat that can facilitate bookmark and link management.
A web search will provide a listing.
Be well...

Url link with target="_blank" hangs in Internet Explorer 7 BUT works fine in IE6, FF, Safari?

Okay, so I have a SWF embedded on a page, which has a link to a target="_blank" url, and it works in every other browser, INCLUDING the notorious ie6, but NOT in IE7?
IE7 just opens a blank page (without the address in the address field) and displays 'connecting...' and stays there forever.
• I even manually typed in the adress of the site I'm trying to access with the link, and the page opened just fine in IE7.
But when I click on the link from the SWF, it hangs again and doesn't open. I manually typed in both addresses with and without the 'www' (i.e. http://somewebsite.com and http://www.somewebsite.com) and both opened in IE7.
But the link from the SWF ONLY opens a blank page with the 'connecting...' and stays there forever.
• I feel like it was working previously, but I could be wrong. Besides that, it is working in ie6, of all things. So I don't get it?
• This also happens with other website that have a link with target="_blank" in IE7, so it's not only my site.
As always any leads are greatly appreciated.
Site with the SWF with the link with target="_blank":
http://solarinkgraphics.com/web.htm • clicking on the IMAGE or the "ENLARGE" link should take you to a target="blank" url
Site it should go to:
http://thehoneymoonphase.com

adobe1kenobe066 wrote:
Site with the SWF with the link with target="_blank":
http://solarinkgraphics.com/web.htm • clicking on the IMAGE or the "ENLARGE" link should take you to a target="blank" url
Site it should go to:
http://thehoneymoonphase.com
First off that first link to the graphics site does not work. Getting a page not found error. Although I was able to do a quick lucky guess and added an "l" to the end of the address and it worked.
Second, because the link is embedded within a Flash document, your problem will lie within the ActionScript code as opposed to the HTML. Thus you would be better off posting this in the Flash forum with your ActionScript code to get better troubleshooting responses.
http://forums.adobe.com/community/flash

Sliding Flash Interface - Using Links from an XML file Problem

Hi All,
Working on a new site for the company i've recently started
working for... fairly new to flash but wanted to try this sliding
interface for the graphic banner at the top of the page...
have a look here at an early version of the site - sliding
graphic interface at the top with coloured rollover buttons (a lot
of work still to do! feel free to post constructive criticism)
(am I allowed to post links??)
here is the unfinished version with no links in the flash bit
http://www.westfieldhealth.com/website/index.asp
The Problem:
I am pulling in a 'heading' 'text' and 'image' into the
sliding graphic interface from the following xml file... (there are
4 different xml files for 4 different slides)
<?xml version="1.0" encoding="iso-8859-1"?>
<content>
<dialogue>
<heading>Interested in selling our health
plans?</heading>
<text>Click here to learn more...</text>
<img>home_window/intSmall.jpg</img>
</dialogue>
</content>
I want to add a link to the xml that would be specific to
each instance of the window...
eg
<link>contact-us/index.asp</link>
But my limited knowledge of flash means I have no idea how to
pull the link through from the xml file to use in the flash...
Perhaps I need link text to pull as well
eg
<link-text>click here to contact us</link-text>
Here is the function that pulls in the img, heading and txt
public function onComplete(event:Event):void {
var loader:URLLoader = event.target as URLLoader;
if (loader != null) {
externalXML = new XML(loader.data);
mover_mc.heading_txt.htmlText =
externalXML.dialogue[0].heading;
mover_mc.myText_txt.htmlText = externalXML.dialogue[0].text;
var url:URLRequest = new
URLRequest(externalXML.dialogue[0].img);
myLoader.load(url);
} else {
trace("loader is not a URLLoader!");
Can anyone help me on how to pull in the link from the xml
and use it to navigate to a different page on the site
Thanks very much
Hans
link to
my unfinished flash file...

What is the exact error you get (what db version also), could you post a simplified version of the SQL which fails also? I have splitter based maps that successfully read from file via the XMLType(bfilename....) style code and insert into multiple targets, I did this on 11g though.
Cheers
David

Problem connecting DataBase Link from windows oracle to oracle on Linux

I'm facing a problem with database links from windows oracle to Oracle hosted on Linux server.
I'm able to successfully create the Database Link using the following query on oracle database hosted on a windows server
CREATE DATABASE LINK SampleDB
CONNECT TO myuser IDENTIFIED BY password
USING 'sample';
The tns names entry on windows for database in Linux server is as follows
DSOFT =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.100)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = sample)
But while executing the query "select count(*) from doctor@SampleDB;" in sql developer on windows, I'm getting the following error
SQL Error: ORA-12154: TNS:could not resolve the connect identifier specified
12154. 00000 - "TNS:could not resolve the connect identifier specified"
*Cause: A connection to a database or other service was requested using
a connect identifier, and the connect identifier specified could not
be resolved into a connect descriptor using one of the naming methods
configured. For example, if the type of connect identifier used was a
net service name then the net service name could not be found in a
naming method repository, or the repository could not be
located or reached.
Using the above tns entries, i'm successfully able to connect to the database in Linux server through sql developer installed on the windows machine. Then why i'm getting this error while executing the query on Database Link?. Can any one help me?

1005745 wrote:
I'm facing a problem with database links from windows oracle to Oracle hosted on Linux server.
I'm able to successfully create the Database Link using the following query on oracle database hosted on a windows server
CREATE DATABASE LINK SampleDB
CONNECT TO myuser IDENTIFIED BY password
USING 'sample';
The tns names entry on windows for database in Linux server is as follows
DSOFT =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.100)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = sample)
But while executing the query "select count(*) from doctor@SampleDB;" in sql developer on windows, I'm getting the following error
SQL Error: ORA-12154: TNS:could not resolve the connect identifier specified
12154. 00000 - "TNS:could not resolve the connect identifier specified"
*Cause: A connection to a database or other service was requested using
a connect identifier, and the connect identifier specified could not
be resolved into a connect descriptor using one of the naming methods
configured. For example, if the type of connect identifier used was a
net service name then the net service name could not be found in a
naming method repository, or the repository could not be
located or reached.
Using the above tns entries, i'm successfully able to connect to the database in Linux server through sql developer installed on the windows machine. Then why i'm getting this error while executing the query on Database Link?. Can any one help me?A database link is acting as a client to the target, remote database in exactly the same fashion and using exactly the same tns infrastructure as any other client trying to connect to that remote database. your ORA-12154 when querying a db link means exactly the same as if you had gotten it trying to connect with sqlplus, from the same server. Check the link SB provided. Keep in mind that the tnsnames file of concern is the one on the source database server.

Restrict URL Access when linking from report

I have an application that will be a little like a wizard in that I need to control how users get to a form, so I would like to prevent them from being able to just going straight to that page and entering data into the form. I tried using various session state security options, including No URL Access, but that blows up when I try to link from a report to that form for editing purposes.
Is there some way I can link from the report if the target page restricts URL access, and can get a get a brief overview (or point me to some documentation) on the various branch types? I can't find a good explanation anywhere and I'm hoping that solves my problem.
thanks.

Hi,
1.
What about using an Authorization Scheme and then using Security of Page Attributes.
In fact it is schema of users, roles, and passwords.
2.
f?p=App:Page:Session:Request:Debug:ClearCache:itemNames:itemValues:PrinterFriendly
f?p=6000:6004:&SESSION.::NO:6003:MY_ITEM1,MY_ITEM2,MY_ITEM3:1234,,5678
This example:
* Runs page 6004 of application 6000 and use the current session ID
* Clears the current session's cache for items on page 6003
* Indicates debug information should be hidden (NO)
* Sets the value of MY_ITEM1 to 1234, sets the value of MY_ITEM2 to null
(indicated by the comma used as placeholder), and sets the value of MY_ITEM3 to 5678
- Into Column Attributes/Column Link/Link Text pick an icon.
- Select for Attributes/Column Link/Target “URL” for table Emp_Address and into URL field type:
javascript: popupURL('f?p=&APP_ID.: 6004:&SESSION…………');
You can use the value of any Item. Then in the URL link page check that item.
Moreover, you can use f?p=&APP_ID.: 6004:&SESSION…..My_Item:#ReportColumnName#.......
I hope this would help.
Konstantin

Linking from outside of Captivate

The User Education team at our office uses Captivate for its training videos, and the question has come up about using absolute links from an HTML page to target and play a specific slide or frame of a Captivate movie. I realize this may be a simple question that's already been answered by the community, but I didn't have any luck searching for the topic within the forums.
Thanks in advance for any assistance!

If you are using Captivate 4 it can be done through JavaScript and an advanced action. Not sure if this approach works in Captivate 5 but here it can be done by using a custom built widget and passing the slide number to the Captivate project / Widget using either Flash Vars or URL vars.
It's not fail proof though since you can run into problems with actually accessing a slide that is not loaded yet.
/Michael
Visit my Captivate blog with tips & tricks, tutorials and Widgets.

Zzxc: Links from email and web pages

When I click on an email link - Firefox opens two browser windows - My homepage AND the page relating to the link. Tried setting up DNS and that hasn't helped. This problem began with version 3.6 and none of the subsequent updates have addressed the problem.
== Operating system ==
OS 10.5.8

The suggestion to change the DNS server was to address the problem with "Server not found" appearing part of the time. Is this still happening?
Both tabs opening when clicking a link from e-mail is a known problem in Firefox 3.6.x versions. It has already been reported - and is currently targeted to be fixed in the next major version of Firefox (4.0).

How to data insert Source server and Linked server (Target Server) at same transaction

I have try several times for Data insert Source server and Linked server (Target Server) at same transaction. I am using Begin transaction. but Source server is completed and Linked server error (or Linked server Completed and source server
ERROR). at this moment I want ROLL back. how?

Hi
Run below query by changing to yourr linked server name and see if DTC is enable or not.. if not
Begin distributed transaction
select * from [ServerName].master.dbo.sysprocesses
Commit Transaction
To enable MSDTC on each Web server on Windows Server 2008
Click Start, click Run, type dcomcnfg and then click OK to open Component Services.
In the console tree, expand Component Services, expand Computers, expand My Computer, and then expand Distributed Transaction Coordinator.
Right click Local DTC, and click Properties to display the Local DTC Properties dialog box.
Click the Security tab.
In the Security Settings section, click Network DTC Access.
In the Client and Administration section, select Allow Remote Clients and Allow Remote Administration.
In the Transaction Manager Communication section, select Allow Inbound and Allow Outbound.
In the Transaction Manager Communication section, select Mutual Authentication Required (if all remote machines are running Windows Server 2003 SP1), select Incoming Caller Authentication Required (if running MSDTC in a cluster), or select No Authentication
Required if some of the remote machines are pre-Windows Server 2003 SP1. No Authentication Required is the recommended selection.
Select Enable XA Transactions, and then click OK.
Repeat steps 1 through 9 on the other Web servers.
Thanks
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Error message when clicking on links from thunderbird: Firefox.exe – Entry Point Not found

When I click on any link in a Thunderbird email message I get the error message:
Firefox.exe – Entry Point Not found
The procedure entry point ?DllBlocklist_Initialize@@YAXXZ could not be located in the dynamic link library T:\PQligP sFuvy (X86)\pJPpSox HneiCFv\GwCMqTQ.Oqt.
I tried uninstalling Firefox 27 completely and reinstalling it, and the error is still there. When I uninstall V27 and install the older V26 the error disappears. Id there an issue with V27 trying to work with links from Thunderbird?
I am on a laptop running Windows 8.1 with all current downloads.

Thanks for the reply - as best as I can tell it seems to be some kind of incompatibility between Thunderbird V24.3.0 and Firefox V27. If I install Firefox V26 then everything works as it should. I haven't tried installing a previous version of Thunderbird to see if that makes a difference.

DB Link from target to stating_area

Similar Messages

Maybe you are looking for