Db link problem in report

I am specifying a db link in program units of oracle reports.when i compile the report,it gets terminated (report builder closes) with out any error messages
please help to solve this issue.
regards
Ajith

Hi Ajith,
create a view based on the database link and try again.
Regards
Frank

Similar Messages

DB link problem between active Data Guard and report application database

My database version in 11.2.0.2.0 and OS is Oracle Solaris 10 9/10.
I am facing a problem in my Active data guard Database for reporting purpose. Active Data guard information is as below.
SQL> select name, database_role, open_mode from v$database;
NAME DATABASE_ROLE OPEN_MODE
ORCL PHYSICAL STANDBY READ ONLY WITH APPLY
Problem detail is below
I have created a db link (Name: DATADB_LINK) between active data guard and report application database for reporting purpose.
SQL> create database link DATADB_LINK connect to HR identified by hr using 'DRFUNPD';
Database link created.
But when I run a query using db link from my report application database I got this below error.
ORA-01555: snapshot too old: rollback segment number 10 with name "_SYSSMU10_4261549777$" too small
ORA-02063: preceding line from DATADB_LINK
Then I check Active Data Guard database alart log file and get below error
ORA-01555 caused by SQL statement below (SQL ID: 11yj3pucjguc8, Query Duration=1 sec, SCN: 0x0000.07c708c3):SELECT "A2"."BUSINESS_TRANSACTION_REFERENCE","A2"."BUSINESS_TRANSACTION_CODE",MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'feature' THEN "A1"."TRANS_DATA_VALUE" END ),MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'otherFeature' THEN "A1"."TRANS_DATA_VALUE" END )
But the interesting point if I run the report query directly in Active Data Guard database, I never got error.
So is it a problem of DB link between active Data Guard and other database?

Fazlul Kabir Mahfuz wrote:
My database version in 11.2.0.2.0 and OS is Oracle Solaris 10 9/10.
I am facing a problem in my Active data guard Database for reporting purpose. Active Data guard information is as below.
SQL> select name, database_role, open_mode from v$database;
NAME DATABASE_ROLE OPEN_MODE
ORCL PHYSICAL STANDBY READ ONLY WITH APPLY
Problem detail is below
I have created a db link (Name: DATADB_LINK) between active data guard and report application database for reporting purpose.
SQL> create database link DATADB_LINK connect to HR identified by hr using 'DRFUNPD';
Database link created.
But when I run a query using db link from my report application database I got this below error.
ORA-01555: snapshot too old: rollback segment number 10 with name "_SYSSMU10_4261549777$" too small
ORA-02063: preceding line from DATADB_LINK
Then I check Active Data Guard database alart log file and get below error
ORA-01555 caused by SQL statement below (SQL ID: 11yj3pucjguc8, Query Duration=1 sec, SCN: 0x0000.07c708c3):SELECT "A2"."BUSINESS_TRANSACTION_REFERENCE","A2"."BUSINESS_TRANSACTION_CODE",MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'feature' THEN "A1"."TRANS_DATA_VALUE" END ),MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'otherFeature' THEN "A1"."TRANS_DATA_VALUE" END )
But the interesting point if I run the report query directly in Active Data Guard database, I never got error.
So is it a problem of DB link between active Data Guard and other database?
Check this note which is applicable for your environment
*ORA-01555 on Active Data Guard Standby Database [ID 1273808.1]*
also
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:8908307196113

Links to early reports of Leopard problems

I have collected a few links to early reports of problems with Leopard. They are mainly for my reference but others may find them useful:
http://users.tpg.com.au/aoaug/mac_osx.html#news
As with any major upgrade, it is evident that users should prepare for the upgrade while they are still running Tiger: Backup data and 3rd party apps, repair permissions with Disk Utility, maybe run Tech Tools to check hardware, do some further housekeeping with 3rd party apps like Macjanitor or Cocktail (links on above page). Then check out the advice for the type of upgrade and the (sometimes tedious) steps that are needed to get everything working again. Oh - and make sure you have access to the internet via another computer - just in case you need to search for advice and/or updates.
I think I will wait a week or two until some of my favourite 3rd party apps are shown to be running happily under Leopard. Then I can enjoy all its great new features.
Message was edited by: Michael Paine

Brother Multi-function printer drivers need updating:
http://www.brother.com/index.htm
to get Twain scanning to work.
Java does not seem to be working in Firefox (eg select fields in web forms) but the fields work OK with Safari.

SQL report link to another report

Hello,
I am using Apex 4 and trying to link an sql report with another report. If I were able to use an interactive report I could easily link that to another page, but that would require me to have a primary key. The problem is that I need to link a few tables. So two questions:
1.) Can I link these via an HTML link to my other page? I would have a HTML link in my report that would link via URL parameter passing. So can I use HTML in a report?
2.) What is the syntax for a parameter passing via URL? Here is my link that would be:
a href= f?p=107:40:&APP_SESSION::::P40_NAME:MARK: Are there any other ways to accomplish this?
Thanks,
Mark
Edited by: LondonMark on 23-May-2011 04:18
Edited by: LondonMark on 23-May-2011 04:20

I am using Apex 4 and trying to link an sql report with another report. If I were able to use an interactive report I could easily link that to another page
It's easy in standard reports< /a>. (Ignore the "Interactive Report" typo in step 1.)
1.) Can I link these via an HTML link to my other page? I would have a HTML link in my report that would link via URL parameter passing. So can I use HTML in a report?You can, but it's better practice to keep data retrieval and HTML structure separate when possible—in this case by using declarative Column Links.
2.) What is the syntax for a parameter passing via URL?This is also covered in the documentation.
Here is my link that would be: a href= f?p=107:40:&APP_SESSION::::P40_NAME:MARK:
{quote}
That looks to have the order of the parameters correct, but it's missing some syntax:<a href="f?p=107:40:&APP_SESSION.::::P40_NAME:MARK">...</a>
The static text exact substitution method of referencing the value of an APEX item requires a terminating dot ("."): <tt>&APP_SESSION.</tt>

InDesign to Adobe Acrobat to Adobe Reader Link problem

Hi - I'm responsible for a long conversation about link problems in creating file links in InDesign that did not work in Acrobat. At the end of that long discussion, I thought I solved the problem, but didn't. Since then, I've been MUCH more observant.
The problem appears to take place in Adobe Reader.
My home computer on Win7 is different than my work Computer (XP), but I have the same software on both.
At work, I discovered that when I clicked on a PDF, it worked fine, that its links opened a new PDF window, but when I clicked on links on the second document, the links failed and Microsoft returned an error message telling me that I was screwed. Because I was screwed, I couldn't see what was in the path of that error.
It turns out that for some unknown reason (which you might clarify for me), my Adobe Readers are attempting to open my documents in Internet Explorer and that just won't work.
What I observed at home is that I made 5 test documents in ID, and ported them to Acrobat. As it turns out, my default for opening PDFs is Adobe Reader, which I saw on the chrome of the first document I opened. When I clicked a link, and I got the error message, I noticed my browser was up.
When I set my default for opening in Acrobat, everything worked like a charm! How about that!
Now then, what that says to me is that Adobe Reader is to be used exclusively with a browser, so if the people who are going to read your internal PDF files with Reader without those files being on a web server of some type, you are totally screwed. The only way you can use Reader is if you click on the file and bring it up directly. Don't rely on linking to other documents.
I mean, that is what it seems to me.
Now, I am creating a big project for an environment without a webserver and obviously my sense of panic is palpable. That said, I believe that all my users can read my files using Acrobat (to be tested tomorrow), which I hope means I can breathe a bit easier.
Do any of you have any thoughts on this subject? If you are really curious, I can make a packet of test files available.

Karen_Little wrote:
The files and the PDFs are all in the same directory.
The tests are on local drives. All indesign files and their related PDFs were in the same directory.
The same for Word and its related PDFs. Note that the PDFs created by Word then read by Adobe Reader worked correctly. They all opened in Adobe Reader.
If the default program for opening PDFs is Acrobat, everything works correctly, with the added benefit of everything opening in a different window, which is what I want (yet to be tested at work). If the default program is Adobe Reader, the second generation of links do NOT work because Reader opens in Internet Explorer.
When I open a Word-created PDF with Acrobat, view the link, and click to the Actions menu, the action is "Open a file"
When I open an InDesign PDF with Acrobat and do the same, the action says "Open a web link"
Big BIG BIG bug.
Are you seeing the link commands by editing them in Acrobat? If not, try, so you can see the exact command and file or URL instruction. It still may be a bug, but you'll have better evidence when you report it here:
Adobe - Feature Request/Bug Report Form
And, you might want to try correcting a link command in Acrobat, to see if can work for both Acrobat and Reader.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Re: Fwd: Link Problems With Borland C++ 4.52

I have seen this problem before in another context, and I'll offer the
cause and solution in the hope that they will apply to the Crystal problem.
Many Windows based applications rely on PASCAL calling conventions, which
change the way parameters are handled in function/method calls. They
indicate this by placing one of the following immediately before the
function name in the prototype declarations:
- pascal_far (or something like that)
- WINAPI
- some other typedef of either of the above
For example:
int WINAPI AddTotal(int valueA, int valueB);
Unfortunately, v2.0 of Forte does not provide any mechanisms for changing
the calling conventions of the prototypes in the generated C++ wrapper
library, so when you compile that code, the linker fails. I think that the
compiler may generate different symbols depending on calling conventions,
so that's why it fails.
To fix this, don't autocompile your code, but generate the distribution, go
into the generated C++ files and look for the function prototypes (I think
you can search for FORTE_NO_PROTOTYPES), add WINAPI to the appropriate
places in the prototype definitions (see above) and use fcompile to build
the library. Instructions for fcompile are in the Interfacing With
External Systems manual.
Hope this helps,
James
At 11:05 AM 5/29/97 PDT, you wrote:
>
We are trying to wrapper Crystal Reports from Forte. I know that there
are a number of other people in this same boat, as I've seen messages
posted here at various points during the past few weeks. We are having
a particular problem with getting the compile to go through, which we
have sent in to Forte Tech Support. I'm forwarding the message I sent
Tech Support to this group in the hopes that someone here may have
already seen and resolved a similar problem.
Thanks in advance for any help you can offer!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
>
Date: Wed, 28 May 97 13:47:20 PDT
From: dg7077a
To: Forte Technical Support
Cc: Gardner, Steve
Subject: Link Problems With Borland C++ 4.52
Name of requestor: [Dale V. Georg / Alaiah Chandrashekar]
Company: [Indus Consultancy Services]
Phone for callback: [(610) 709-3956]
Customer Site: [Mack Trucks, Inc.]
Product: [Forte]
Version of Forte: [2.0.H.1]
Server OS: [SunOS 5.5.1]
Client OS: [Windows 3.1]
DBMS: [Oracle 7.2.3]
Reproducible?: [Yes]
Brief description: [Link Problems With Borland C++ 4.52]
Complete description of problem or question:
We are attempting to write a C-wrapper interface from Forte to Crystal
Reports' Report Engine. We are using Borland C++ version 4.52.
Unfortunately, we have been unable to get a clean compile after a day
and half of effort. We get as far as the link stage of the
compilation, and
the compiler aborts with an "Unknown symbol" error message for each
of the functions we are trying to wrapper. We have tried a number of
ideas to fix this problem, and are continuing to try to solve it on
our own,
but any help would be greatly appreciated. Please have someone call
Alaiah Chandrashekar at the number above as soon as possible.
Thanks!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
James Urquhart [email protected]
Product Manager phone: (510) 986-3513
Forte Software, Inc. fax: (510) 869-2092

James,
Thanks for your quick response. Yesterday we had been running down
the path of examining the calling conventions and trying to change them
to PASCAL, but without much success. After receiving your note, we
went back over it again, and this time we were able to finally to piece it
together. In addition to editing the Forte-generated .cc file to declare
the functions as PASCAL, we also had to turn off the compiler's case
sensitivity. (The Crystal .lib file had the function names in mixed case,
but the Borland compiler was generating all uppercase for the names.)
Now I had actually tried this yesterday and it didn't work (in fact it
generated a whole bunch of new errors) - because until we took a
second look at it today, I didn't realize that Borland's linker actually has
TWO flags that control case sensitivity. If you only turn one or the
other off, things can get pretty ugly looking. As soon as we turned
both of them off, the compile and link went beautifully. Again, thanks
for your help; hopefully we are over the worst of it now!
Dale
I have seen this problem before in another context, and I'll offer the
cause and solution in the hope that they will apply to the Crystalproblem.
>
Many Windows based applications rely on PASCAL callingconventions, which
change the way parameters are handled in function/method calls.They
indicate this by placing one of the following immediately before the
function name in the prototype declarations:
- pascal_far (or something like that)
- WINAPI
- some other typedef of either of the above
For example:
int WINAPI AddTotal(int valueA, int valueB);
Unfortunately, v2.0 of Forte does not provide any mechanisms forchanging
the calling conventions of the prototypes in the generated C++wrapper
library, so when you compile that code, the linker fails. I think thatthe
compiler may generate different symbols depending on callingconventions,
so that's why it fails.
To fix this, don't autocompile your code, but generate thedistribution, go
into the generated C++ files and look for the function prototypes (I think
you can search for FORTE_NO_PROTOTYPES), add WINAPI tothe appropriate
places in the prototype definitions (see above) and use fcompile tobuild
the library. Instructions for fcompile are in the Interfacing With
External Systems manual.
Hope this helps,
James
At 11:05 AM 5/29/97 PDT, you wrote:
We are trying to wrapper Crystal Reports from Forte. I know that
there
are a number of other people in this same boat, as I've seenmessages
posted here at various points during the past few weeks. We arehaving
a particular problem with getting the compile to go through, whichwe
have sent in to Forte Tech Support. I'm forwarding the message Isent
Tech Support to this group in the hopes that someone here mayhave
already seen and resolved a similar problem.
Thanks in advance for any help you can offer!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc.
[email protected]
>
>>
Date: Wed, 28 May 97 13:47:20 PDT
From: dg7077a
To: Forte Technical Support
Cc: Gardner, Steve
Subject: Link Problems With Borland C++ 4.52
Name of requestor: [Dale V. Georg / AlaiahChandrashekar
Company: [Indus Consultancy Services]
Phone for callback: [(610) 709-3956]
Customer Site: [Mack Trucks, Inc.]
Product: [Forte]
Version of Forte: [2.0.H.1]
Server OS: [SunOS 5.5.1]
Client OS: [Windows 3.1]
DBMS: [Oracle 7.2.3]
Reproducible?: [Yes]
Brief description: [Link Problems With Borland C++ 4.52]
Complete description of problem or question:
We are attempting to write a C-wrapper interface from Forte to
Crystal
>>
Reports' Report Engine. We are using Borland C++ version 4.52.
Unfortunately, we have been unable to get a clean compile after aday
and half of effort. We get as far as the link stage of the
compilation, and
the compiler aborts with an "Unknown symbol" error message foreach
of the functions we are trying to wrapper. We have tried a numberof
ideas to fix this problem, and are continuing to try to solve it on
our own,
but any help would be greatly appreciated. Please have someonecall
Alaiah Chandrashekar at the number above as soon as possible.
Thanks!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, [email protected]
James Urquhart [email protected]
Product Manager phone: (510) 986-3513
Forte Software, Inc. fax: (510) 869-2092-----------------------------------------------------------------------------------
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
[email protected]------------------

Deactivate a link from a report

Is it possible to deactivate a link from a report? Here is the problem I am facing. I have a database that will be used by 6 people and I am using a report to display records to be worked. So, when one user clicks on a record to make edits, I want to ensure that the other 5 users can't select the same record. I am trying to keep users from doing duplicate work and having an error message given to the user who doesn't save the record first. I didn't know if it was possible to do a conditional link by checking the session to see if the record is currently called up? Any help would be appreciated.

Simplistically:
When you "pull up" your record to edit, you can write a onload process to set a flag on that record with the user/timestamp to indicate that the record is locked. When the record is saved back to the database, have the save process clear this flag.
Of course, in a real-world situation, many other factors have to be considered, as Scott was alluding to...
What happens if User pulls up the record and his browser crashes, he leaves the page without saving or goes for lunch or ...? No other user will be able to edit that record. This is generally considered a "non scalable" design, but if it works for you, go ahead!

The edit Link on my report form opens the page to create a new record.

For some reason my applications edit link on the report form is opening a new blank entry instead of pulling the data that needs edited from that row. I just have a basic report and form. Where can I check this Edit button to see if it is linking to the existing data?

I found my problem my select statement had the primary key column removed some how.

Link problem after 3.0.9.8.4 patch

Hello,
there is another problem, after applying 3.0.9.8.4 patch on my portal. Link in reports doesn't work properly - before it works well, but now with the new version the link doesn't send parameters (it can be seen in URL) - but it should. I set link and the report properly, as i set many times before.
Is it another bug after patch 3.0.9.8.4 on MS WIN, or did I something wrong? Has anyone an idea how to avoid problems ? Will there be patches in few days ? If not, so what can I do, reinstall patch, what was correctly apllied, or reinstal whole portal ?
Any help would be appreciated.
Ales Hrncarek ([email protected])

THE PROBLEM IS NOT SOLVED.
I used report.
1) SQL query
select * from table@dblink
2) give to one of the table's columns a link, then click to assign parameters - it is ALL OK.
------BUT----------
1) SQL query
select [only a few columns from table] from table@dblink
2) give to one of the table's columns a link, then click to assign parameters. When I populate the window to assign values to parameters from link, there are filled LOVs and when i set them, they reset again after I click APPLY buton - AND ---> that is more important THE LINK DOESN'T SEND PARAMETERS AT ALL. (can be seen in page source -html)
it all worked before 30984. I'm angry because this week my work stopped and I have to solve this kind of problems, which haven't end.
Can somebody asure me, that there will be patch soon - in few days, or I should reinstall whole portal ? Or is a workaround here ?
Please help. Thanks. Ales Hrncarek

Report links in Crystal Reports portlet for IBM Websphere 6.0

Hi,
We have some problem when we try to use BusinessObjects XI Release 2 Java Portal Integration Kit for WebSphere (http://ftp1.businessobjects.com/outgoing/products/pik/BusinessObjectsPortlets.zip), that was downloaded from http://www.businessobjects.com/products/downloadcenter/boepik.asp.
This portlet configured for work with Crystal Reports Server XI Release 2 Service Pack 2.
The portal server that we use is IBM WebSphere Portal Server 6.0.
In Portlet interface we can see list of reports on Crystal Reports server, but links for this reports lead us from browser window direct to Crystal Reports Server without Portal links rewriting. It is problem because we have access to Crystal Reports Server only from Portal Server computer. It is not accessible from users computers due to security reasons and network restrictions. Coud you help us and provide some advices how to configure this portlet in way to show reports through Portal?
Thanks in advance,
Best Regards
B.M.

Here is a list of all the communication types available. You must enter them as a comma seperated list. I personally hard code them in the WEB-INF/portlet.xml and then redeply the BOportlet.war file. If you don't want to do that, you should be able to add them by logging in to the Webspere Portal admin interface.
Portlet Management>Portlets>Document List>Configure Portlet>Page 2 edit the Communication Types.
CrystalReport, Analysis, Webi, Word, Excel, Powerpoint, Pdf, Txt, Rtf, MyInfoView, AFDashboardPage, Analytic, FullClient
I am also attaching a snippet of my portlet.xml where I added the comunication types in there.
Once these are added, when you run/view a report in the document list portlet, the report will open in the document view portlet.
Let me know if this helps.
--Jack
<portlet-info>
      <title>Document List</title>
    </portlet-info>
    <portlet-preferences>
      <preference>
        <name>Communication Types</name>
    <value>Analysis,Analytic,CrystalReport,FullClient,Excel,MyInfoView,Pdf,Powerpoint,Rtf,Txt,Webi</value>
        <read-only>false</read-only>
      </preference>
      <preference>
        <name>Communication Keyword</name>
        <value>BOPortletCommunicationId</value>
        <read-only>false</read-only>
      </preference>

Fwd: Link Problems With Borland C++ 4.52

We are trying to wrapper Crystal Reports from Forte. I know that there
are a number of other people in this same boat, as I've seen messages
posted here at various points during the past few weeks. We are having
a particular problem with getting the compile to go through, which we
have sent in to Forte Tech Support. I'm forwarding the message I sent
Tech Support to this group in the hopes that someone here may have
already seen and resolved a similar problem.
Thanks in advance for any help you can offer!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
Date: Wed, 28 May 97 13:47:20 PDT
From: dg7077a
To: Forte Technical Support
Cc: Gardner, Steve
Subject: Link Problems With Borland C++ 4.52
Name of requestor: [Dale V. Georg / Alaiah Chandrashekar]
Company: [Indus Consultancy Services]
Phone for callback: [(610) 709-3956]
Customer Site: [Mack Trucks, Inc.]
Product: [Forte]
Version of Forte: [2.0.H.1]
Server OS: [SunOS 5.5.1]
Client OS: [Windows 3.1]
DBMS: [Oracle 7.2.3]
Reproducible?: [Yes]
Brief description: [Link Problems With Borland C++ 4.52]
Complete description of problem or question:
We are attempting to write a C-wrapper interface from Forte to Crystal
Reports' Report Engine. We are using Borland C++ version 4.52.
Unfortunately, we have been unable to get a clean compile after a day
and half of effort. We get as far as the link stage of the
compilation, and
the compiler aborts with an "Unknown symbol" error message for each
of the functions we are trying to wrapper. We have tried a number of
ideas to fix this problem, and are continuing to try to solve it on
our own,
but any help would be greatly appreciated. Please have someone call
Alaiah Chandrashekar at the number above as soon as possible.
Thanks!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
-------------

We are trying to wrapper Crystal Reports from Forte. I know that there
are a number of other people in this same boat, as I've seen messages
posted here at various points during the past few weeks. We are having
a particular problem with getting the compile to go through, which we
have sent in to Forte Tech Support. I'm forwarding the message I sent
Tech Support to this group in the hopes that someone here may have
already seen and resolved a similar problem.
Thanks in advance for any help you can offer!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
Date: Wed, 28 May 97 13:47:20 PDT
From: dg7077a
To: Forte Technical Support
Cc: Gardner, Steve
Subject: Link Problems With Borland C++ 4.52
Name of requestor: [Dale V. Georg / Alaiah Chandrashekar]
Company: [Indus Consultancy Services]
Phone for callback: [(610) 709-3956]
Customer Site: [Mack Trucks, Inc.]
Product: [Forte]
Version of Forte: [2.0.H.1]
Server OS: [SunOS 5.5.1]
Client OS: [Windows 3.1]
DBMS: [Oracle 7.2.3]
Reproducible?: [Yes]
Brief description: [Link Problems With Borland C++ 4.52]
Complete description of problem or question:
We are attempting to write a C-wrapper interface from Forte to Crystal
Reports' Report Engine. We are using Borland C++ version 4.52.
Unfortunately, we have been unable to get a clean compile after a day
and half of effort. We get as far as the link stage of the
compilation, and
the compiler aborts with an "Unknown symbol" error message for each
of the functions we are trying to wrapper. We have tried a number of
ideas to fix this problem, and are continuing to try to solve it on
our own,
but any help would be greatly appreciated. Please have someone call
Alaiah Chandrashekar at the number above as soon as possible.
Thanks!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
-------------

Data Link In Oracle Report

Hi,
What is the significance of group level data links in oracle reports?How is it different from data links that select column from each groups?
Thanks

Hi user;
Please check below and see its helpful:
[Link 1|http://download-west.oracle.com/docs/html/B10602_01/toc.htm]
[Link 2|http://www.oracle.com/technology/software/index.html]
[Link 3|http://download.oracle.com/docs/html/A73172_01/output/bawor_re.htm]
[Link 4|http://www.softwaregeek.com/reports-oracle-10g/p1.html]
Regard
Helios

How to link a webi report from crystal report

Hello everyone,
I am trying to link a webi report from crystal XI.
In my crosstab, the data is divided grouped by periods.
So for every country it shows data along a period of time.
The details for the value of the crosstab are in a webi report.I am trying to pass the period value and country name as a prompt from crystal to webi but it is not picking them correctly.
can we pass prompts from a crystal report to a webi url??

Try to use OpenDoc URL to pass the parameter values from crystal to webi. To use OpenDoc URL you need to publish these reports in server. See the following example
http://server name:8080/businessobjects/enterprise115/desktoplaunch/opendoc/openDocument.jsp?sType=wid&sPath=[folder name]&sDocName=Child&iDocID=4804&lsSEnter+State:=California
Regards,
Raghavendra
Edited by: Raghavendra Gadhamsetty on Nov 14, 2008 8:51 PM

Links in Discoverer Reports

I am new to Discoverer Reports so i want know, how to implement links in discoverer reports, I have two worksheets/links/pages in a
Discoverer Report, in the first worksheet/page some data will be displayed,
i want to display links for a particular column, if i click on the column value/cell value, it should take me to another page/worksheet with the column value
/cellvalue as parameter to the next page/link.
Provide me a solution for creating this discoverer report.
Thanks,
Manju.

Manju,
I'm not sure which version of Discoverer are you using. If you are using Discoverer 10gR2 then you can follow these steps fot that. I'm assume you want to show header(Eg; PO) information on one sheet and when user click on it you want to show the (PO)line information. Taking the PO report as example follow these steps in discoverer plus.
Create 2 worksheets with the necessary information.Keep the PO Number in both the sheets. Select PO Number then goto Tools-->Manage Links and select the destination workbook and sheet. Give a name to the link. This will give you the information you need but will still show you line level information for all the PO's. Create a condition in both sheets for PO Number go back to edit link and the parameters button is enabled select the PO# parameter there. Hope this helps.

To Link a Crystal Report (2008) from Webi report - Prompts not to Repeat

Hi ,
I have created a Webi report and Crystal report (2008) both have the same prompts.now i want to create a Hyperlink in Webi to link the Crystal report.
i am able to do this. however the crystal report is again asking to provide the prompts which i already given in Webi.which should not happen.
So how to achieve this scenario in Webi.
Need your help as soon as possible.
Regards,
Kishore.

Hi
the information you need are in the following manuals
[Viewing Crystal Reports Using URL Reporting|http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_cr_url_reporting_en.pdf]
and
[Viewing Documents Using OpenDocument|http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_opendocument_en.pdf]
Thanks!

Db link problem in report

Similar Messages

Maybe you are looking for