DB_Release_Unknown

Hi,
I was upgraded my DB(oracle) from 9.2 to 10g
when i am running DB02 transaction i am getting an ABAP Dump called "DB_Release_Unknown"
please help me in solving this dump error.

Hi,
Check the level of your Basis support package according to SAP note 868681
Nahum

Similar Messages

  • DB_Release_Unknown -ABAP Dump

    Hi,
    I was upgraded my DB(oracle) from 9.2 to 10g
    when i am running DB02 transaction i am getting an ABAP Dump called "DB_Release_Unknown"
    please help me in solving this dump error.

    Hi
    you need to apply some corrections notes Please refer the SAP Note 965485, Note 761686.
    Regards
    George Varghese
    Award points if this helps you

  • DB_RELEASE_UNKNOWN - Dump

    Hi ALL,
    I have installed SAP 4.7EE 200 release. I have run installation check. it shows no errors.. But when i ran through the DB02 Tcode, its getting dump DB_RELEASE_UNKNOWN.
    My database release is 10.2.0.1
    Oracle CLient 9x
    OS - HP UX 11.23
    I have checked the SAP Notes 761686.
    Presently My Patch level is 41 (Basis)
    Kernel Patch level is 21.
    Might be i need to update the Basis and Kernel Patchs levels. I will apply the latest patch levels and update on  this. Hope it works.
    Thanks
    Mahesh

    Hi,
    > My database release is 10.2.0.1
    not good, it must be 10.2.0.2 or 10.2.0.4
    any other is not supported
    > Oracle CLient 9x
    you do not specify the exact version, but this must be 9.2.0.7 or 9.2.0.8
    Regarding the dump, you do not specify your basis level. Probably, the note you mentioned (761686) is the one you have to start with. Unfortunately, it does not seem to apply to your version. I think you should check note 868681 Oracle Database 10g: Database Release Check

  • Error while execting Tcodes ST04,ST03,DB12,DB02

    Hi Experts,
    I had installed QAS & DEV instances successfully on one windows host.Below are the syste details.
    OS :- Windows 2003 64 bit Standard Edition
    Database :- Oracle 10.2.0.2
    SAP :- R/3 4.7 Enterprise Ext. 200 SR1
    Support Pack :-
    SAP_Basis 6.20 Level 41
    SAP_APPL 470  Level 21
    SAP_ABA  6.20  Level 41
    I am facing problem while executing transactions related to database i.e st04,st03,db12,db02.
    After executing this transactions I received followng dumps.
    1) Runtime Errors DBIF_DSQL2_SQL_ERROR
    Exception CX_SY_NATIVE_SQL_ERROR
    Database error text........: "ORA-00904: "KEY": invalid identifier"
    Triggering SQL statement...: "FETCH NEXT "
    Internal call code.........: "DBDS/NEW DSQL"
    2) Runtime Errors RAISE_EXCEPTION
    Exception condition "DB_RELEASE_UNKNOWN" raised
    Error analysis
    A RAISE statement in the program "SAPLSORA" raised the exception
    condition "DB_RELEASE_UNKNOWN".
    Since the exception was not intercepted by a superior program
    in the hierarchy, processing was terminated.
    3)Runtime Errors BCD_ZERODIVIDE
    Exception CX_SY_ZERODIVIDE
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assigned to the class 'CX_SY_ZERODIVIDE', was neither
    caught nor passed along using a RAISING clause, in the procedure
    "SKOM_CT_PERF_BUF_REDO" "(FUNCTION)"
    Since the caller of the procedure could not have expected this exception
    to occur, the running program was terminated.
    The reason for the exception is:
    In the current program "SAPLSKOM", an arithmetic operation ('DIVIDE',
    '/', 'DIV', or 'MOD') with a type P operand attempted to divide
    by 0.
    4) Runtime Errors COMPUTE_BCD_OVERFLOW
    Exception CX_SY_ARITHMETIC_OVERFLOW
    Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assigned to the class 'CX_SY_ARITHMETIC_OVERFLOW',
    was neither
    caught nor passed along using a RAISING clause, in the procedure
    "SKOM_CT_PERF_BUF_LIB" "(FUNCTION)"
    Since the caller of the procedure could not have expected this exception
    to occur, the running program was terminated.
    The reason for the exception is:
    An overflow has been determined in the current arithmetical operation
    containing operands of type P. Possible causes include:
    1. The results field of type P is to small and the result does not fit
    into it.
    places.
    2. The result or partial result has more than 31 decimal places.
    Thanks,
    Sachin

    Hi Markus,
    I have seen the note#741119, it asks to apply pack SAPKB64004, but its says its valid for Release 640 only. My release is 640 currently:
    Software Component Name     SAP_BASIS
    Software Component Release     620
    Support Package Level     0041
    Highest Imported Support Package     SAPKB62041
    Short Description of Software Component     SAP Basis Component
    Support Package type     Basis Support Pkg.
    My question is, can i apply the pack directly on release 620? The prequisite to this pack says, the release should be 640. This forum helped me a lot, hoping you guys will solve my this issue as well.
    Regards.

  • Two SAP Instances (DEV & QAS) on singe windows host.

    Dear Gurus,
    I am planning to install the two seprate R/3 4.7 Enterprise Ext.200 SR1 (central) instances on one host ( windows 2003 Standard R2 server.)
    **Server Configuration :-**
    **CPU :- Intel  Xeon 3.0 Ghz.**
    **RAM:- 4 GB**
    **HDD :- 380 GB**
    **OS :- Windows 2003 Standard Edition R2 SP1**
    **Database :- Oracle 9.4.0.1**
    **SAP :- R/3 4.7E X 200 SR1(NON UNICODE)**
    I have query related to
    1)On above system configuration the two sap instances will run or not?
    2) Oracle that I have to install oracle two times or Can I create two databases using the single oracle executable directory ?
    3) If  I have to install oracle two times then what configuration I have to do to connect to the database?
    4)What about the Host names ? I have to define two host names ? How ?
    5) What activities I have to perform post installation ?
    Please help me on this.
    Thanks & Regards,
    Sachin Sable

    Hi Nilesh/Kaushal
    Thanks for your support, I really appriciate it.
    I had install the QAS instance successfully on one sever.
    Now both QAS & DEV instances are up & running.
    But I am facing problem while executing transactions related to database i.e st04,st03,db12,db02.
    After executing this transactions I received followng dumps.
    1) Runtime Errors         DBIF_DSQL2_SQL_ERROR 
    Exception              CX_SY_NATIVE_SQL_ERROR
    Database error text........: "ORA-00904: "KEY": invalid identifier"
    Triggering SQL statement...: "FETCH NEXT "                        
    Internal call code.........: "[DBDS/NEW DSQL]"                    
    2) Runtime Errors         RAISE_EXCEPTION
    Exception condition "DB_RELEASE_UNKNOWN" raised
    Error analysis                                                 
    A RAISE statement in the program "SAPLSORA" raised the exception
    condition "DB_RELEASE_UNKNOWN".                                
    Since the exception was not intercepted by a superior program  
    in the hierarchy, processing was terminated.                   
    3)Runtime Errors         BCD_ZERODIVIDE 
    Exception              CX_SY_ZERODIVIDE
    An exception occurred. This exception is dealt with in more detail below      
    . The exception, which is assigned to the class 'CX_SY_ZERODIVIDE', was neither
    caught nor passed along using a RAISING clause, in the procedure              
    "SKOM_CT_PERF_BUF_REDO" "(FUNCTION)"                                         
    Since the caller of the procedure could not have expected this exception      
    to occur, the running program was terminated.                                
    The reason for the exception is:                                              
    In the current program "SAPLSKOM", an arithmetic operation ('DIVIDE',         
    '/', 'DIV', or 'MOD') with a type P operand attempted to divide               
    by 0.                                                                         
    4) Runtime Errors         COMPUTE_BCD_OVERFLOW    
    Exception              CX_SY_ARITHMETIC_OVERFLOW
    Error analysis                                                                               
    An exception occurred. This exception is dealt with in more detail below    
    . The exception, which is assigned to the class 'CX_SY_ARITHMETIC_OVERFLOW',
    was neither                                                                
    caught nor passed along using a RAISING clause, in the procedure            
    "SKOM_CT_PERF_BUF_LIB" "(FUNCTION)"                                        
    Since the caller of the procedure could not have expected this exception    
    to occur, the running program was terminated.                              
    The reason for the exception is:                                            
    An overflow has been determined in the current arithmetical operation       
    containing operands of type P. Possible causes include:                     
    1.  The results field of type P is to small and the result does not fit     
        into it.                                                                
        places.                                                                 
    2.  The result or partial result has more than 31 decimal places.                                                                               
    Thanks,
    Sachin

Maybe you are looking for