DB- verify does not return memory to process

Hello.
I have an app that uses a simple concurrent data disk store. At init time, it does the following:
create an env
open the env
create a db
set btree compare func
verify the db (i.e. DB->verify)
close the db
close the env
create an env
open the env
create a db
set btree compare func
open the db
begin using db...
If my db file is large to begin with, say 4 GB, after the DB->verify call my app will be using upwards of 2.9 GB of memory. However, the app continues to use the same amount of memory after the db and env are closed and re-created. If I skip the verify step and simply open the db to begin with, memory usage is much much less.
I am calling verify with flags set to 0 and a NULL database and outfile parameter. I need to call verify to make sure that my db file is not corrupt before using it. I am using BDB 4.8.24. Tests were done on a CentOS 5.3 64 bit machine.
Am I doing something wrong? How do I clean up after calling verify so I can get my memory back?
Thanks in advance.
- Sahir

Hello,
I know its been a long time, but I'll take a look and let you know what I find out.
Thanks,
Sandra

Similar Messages

  • AGate.exe does not return memory + ITS Upgrade

    Hello~
    I'm using SAP 40B(too old!) and ITS 6100. 1021. 53. 153 (too old, too!!!!!).
    However, AGate.exe process does not return used memory.
    So when process reached memory limitation (about 1GB), Then I must restart ITS Manager.
    Question 1>  Is this a matter of session closing? My configurations are like below..
    + Performance
         - MaxSessions : 6144
         - MaxWorkThreads : 60
         - MinWorkThreads  : 8
         - TimeoutPercentage : 75
       + Global Services > All Settings
         - ~usertimeout : 24
         - ~timeout : 20
    Quyestion 2>  Can I upgrade ITS version on SAP 40B? IF that is possible, which is the lastest version can?

    Hello,
    I do agree, ITS 6.10 is much too old, right   Nobody is able to
    support ITS 6.10 anymore, even if we would be willing to do so.
    I would suggest to upgrade to ITS 6.20 which can of course be used
    to connect to your 4.0B system.
    ITS 6.20 should be run on a 64bit platform where you can forget such
    memory limitations, though I recommend to find out why the ITS-Agate
    uses such a huge memory amount.
    regards
    Tobias

  • CQWP does not return result for a specific query when filtering on a managed metadata field.

    Hi,
    We are facing a serious production issue. We've search the web extensively but to no avail.
    Problem:
    CQWP does not return result for a specific query when filtering on a managed metadata field.
    ULS log:
    The Uls logs provides 3 different messages that I could relate to every time the query is executed. The last item(level Medium) is displayed 14 times. For readability I've moved the ULS logs to the bottom of this question.
    Query:
    The query is as follows:
    (I've translated this from dutch so pardon any typo's)
    Query: (top selection) Display items from all sites in the site collection
    ListType: Documentlibrary
    Contenttype:
    Items from this group:Custom Document Contenttypes
    Items from this content type: Verklaring
    Filter: Soort is equal to X
    extra info: the field soort (Type) is a managed metadata field that was assigned the value X
    Managed Metadata Structure:
    -managed metadata service
      -Contoso
        -Enterprise Taxonomy (term set)
          -Document (term)
            -Verklaring (term)
              -Soort (term)
                -x (term)
    EXTRA INFO:
    When I modify the filter to filter on Title the CQWP DOES return the correct document!
    When I modify the query settings to search a specific library the CWQP also does return the correct document! (In this case I am filtering on a managed metadata field).
    QUESTION:
    Why doesn't the CQWP return the document when filtering on a managed metadata field over the entire site collection.
    Why does the CQWP return the document when filtering on a managed metadata field over a single library.
    (The type of information the CQWP should return (Soort:x) is stored in a dozen document libraries!)
    Here are the ULS logs.
    Product: Web Content Management
    Category Publishing
    Level: Monitorable:
    CrossListQueryCache::GetSiteData() caught exception (Microsoft.SharePoint.SPException: Kan deze actie niet voltooien.  Probeer het opnieuw. ---> System.Runtime.InteropServices.COMException (0x80004005): Kan deze actie niet voltooien.  Probeer
    het opnieuw.     bij Microsoft.SharePoint.Library.SPRequestInternalClass.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter pCallback, Object& pvarColumns)    
    bij Microsoft.SharePoint.Library.SPRequest.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter pCallback, Object& pvarColumns)     --- Einde van intern uitzonderingsstackpad
    ---     bij Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)     bij Microsoft.SharePoint.Library.SPRequest.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery,
    ISP2DSafeArrayWriter pCallback, Object& pvarColumns)     bij Microsoft.SharePoint.SPWeb.GetSiteData(SPSiteDataQuery query)     bij Microsoft.SharePoint.Publishing.CachedArea.GetSiteData(SPWeb web, SPSiteDataQuery
    siteDataQuery, Boolean useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.CachedArea.GetCrossListQueryResults(SPSiteDataQuery query, SPWeb currentContext, Boolean onlyPopulateCache, Boolean useSpQueryOnList, Int32 lcid)    
    bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(CachedArea cachedArea, SPWeb web, SPSiteDataQuery query, Boolean useSpQueryOnList)) for query:  '<ViewFields><FieldRef ID="{fa564e0f-0c70-4ab9-b863-0177e6ddd247}"
    Nullable="True" Type="Text"/><FieldRef ID="{94f89715-e097-4e8b-ba79-ea02aa8b7adb}" Nullable="True" Type="Lookup"/><FieldRef ID="{1d22ea11-1e32-424e-89ab-9fedbadb6ce1}" Nullable="True"
    Type="Counter"/><FieldRef ID="{28cf69c5-fa48-462a-b5cd-27b6f9d2bd5f}" Nullable="True" Type="DateTime"/><FieldRef ID="{1df5e554-ec7e-46a6-901d-d85a3881cb18}" Nullable="True" Type="User"/><FieldRef
    ID="{d31655d1-1d5b-4511-95a1-7a09e9b75bf2}" Nullable="True" Type="User"/><FieldRef ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True" Type="DateTime"/><FieldRef ID="{30bb605f-5bae-48fe-b4e3-1f81d9772af9}"
    Nullable="True" Type="Lookup"/><FieldRef ID="{ba3c27ee-4791-4867-8821-ff99000bac98}" Nullable="True" Type="Text"/><FieldRef ID="{c5c4b81c-f1d9-4b43-a6a2-090df32ebb68}" Nullable="True"
    Type="Lookup"/><FieldRef ID="{8fca95c0-9b7d-456f-8dae-b41ee2728b85}" Nullable="True" Type="Lookup"/><FieldRef ID="{39360f11-34cf-4356-9945-25c44e68dade}" Nullable="True" Type="Text"/><FieldRef
    ID="{543bc2cf-1f30-488e-8f25-6fe3b689d9ac}" Nullable="True" Type="Image"/><FieldRef ID="{43bdd51b-3c5b-4e78-90a8-fb2087f71e70}" Nullable="True" Type="Number"/><FieldRef ID="{9da97a8a-1da5-4a77-98d3-4bc10456e700}"
    Nullable="True" Type="Note"/><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}" Nullable="True" Type="Lookup"/><FieldRef Name="ScopeId" /><FieldRef Name="_Level" /><FieldRef
    Name="UniqueId" /><ListProperty Name="DraftVersionVisibility" /></ViewFields><Lists ServerTemplate="101"></Lists><Webs Scope="Recursive" /><RowLimit>45</RowLimit><Query><Where><And><BeginsWith><FieldRef
    Name="ContentTypeId" Nullable="True" Type="ContentTypeId"/><Value Type="ContentTypeId">0x010100C5FEE83B67FA6445B0C14AE8B7761BB8011E</Value></BeginsWith><In><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}"
    LookupId="TRUE"/><Values><Value Type="Counter">783</Value></Values></In></And></Where><OrderBy><FieldRef ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True"
    Type="DateTime" Ascending="FALSE"/></OrderBy></Query>' at url: /. Titel webonderdeel: Inhoudsquery
    Product: Web Content Management
    Category Publishing
    Level: Warning
    Error occured while processing a Content Query Web Part. Performing the following query '<ViewFields><FieldRef ID="{fa564e0f-0c70-4ab9-b863-0177e6ddd247}" Nullable="True" Type="Text"/><FieldRef ID="{94f89715-e097-4e8b-ba79-ea02aa8b7adb}"
    Nullable="True" Type="Lookup"/><FieldRef ID="{1d22ea11-1e32-424e-89ab-9fedbadb6ce1}" Nullable="True" Type="Counter"/><FieldRef ID="{28cf69c5-fa48-462a-b5cd-27b6f9d2bd5f}" Nullable="True"
    Type="DateTime"/><FieldRef ID="{1df5e554-ec7e-46a6-901d-d85a3881cb18}" Nullable="True" Type="User"/><FieldRef ID="{d31655d1-1d5b-4511-95a1-7a09e9b75bf2}" Nullable="True" Type="User"/><FieldRef
    ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True" Type="DateTime"/><FieldRef ID="{30bb605f-5bae-48fe-b4e3-1f81d9772af9}" Nullable="True" Type="Lookup"/><FieldRef ID="{ba3c27ee-4791-4867-8821-ff99000bac98}"
    Nullable="True" Type="Text"/><FieldRef ID="{c5c4b81c-f1d9-4b43-a6a2-090df32ebb68}" Nullable="True" Type="Lookup"/><FieldRef ID="{8fca95c0-9b7d-456f-8dae-b41ee2728b85}" Nullable="True"
    Type="Lookup"/><FieldRef ID="{39360f11-34cf-4356-9945-25c44e68dade}" Nullable="True" Type="Text"/><FieldRef ID="{543bc2cf-1f30-488e-8f25-6fe3b689d9ac}" Nullable="True" Type="Image"/><FieldRef
    ID="{43bdd51b-3c5b-4e78-90a8-fb2087f71e70}" Nullable="True" Type="Number"/><FieldRef ID="{9da97a8a-1da5-4a77-98d3-4bc10456e700}" Nullable="True" Type="Note"/><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}"
    Nullable="True" Type="Lookup"/><FieldRef Name="ScopeId" /><FieldRef Name="_Level" /><FieldRef Name="UniqueId" /><ListProperty Name="DraftVersionVisibility" /></ViewFields><Lists
    ServerTemplate="101"></Lists><Webs Scope="Recursive" /><RowLimit>45</RowLimit><Query><Where><And><BeginsWith><FieldRef Name="ContentTypeId" Nullable="True" Type="ContentTypeId"/><Value
    Type="ContentTypeId">0x010100C5FEE83B67FA6445B0C14AE8B7761BB8011E</Value></BeginsWith><In><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}" LookupId="TRUE"/><Values><Value Type="Counter">783</Value></Values></In></And></Where><OrderBy><FieldRef
    ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True" Type="DateTime" Ascending="FALSE"/></OrderBy></Query>' generated the following error: Kan deze actie niet voltooien.  Probeer het opnieuw.
    at the following url: /. Titel webonderdeel: Inhoudsquery
    Kan deze actie niet voltooien. Probeer het opnieuw. This is Dutch. It means something like: Cannot complete this action. Please try again.
    Product: Web Content Management
    Category Publishing
    Level: Medium (this message is displayed 14 times)
    ConsoleUtilies.GetContextualControlMode had no currentPage so the current SPWebPartManager mode cannot be retrieved.

    Hi,
    while digging through the logging (again) I found some extra logging regarding the same correlation id (see details below).
    We have a fairly large term store (4000+ lines).
    If somebody has a clue or tip that would greatly appreciated!
    03-19-2014 13:49:51.87 w3wp.exe (0x2098) 0x23BC SharePoint Foundation Database fa42 Monitorable A large block of literal text was sent to sql.  This can result in blocking in sql and excessive memory use on the front
    end.  Verify that no binary parameters are being passed as literals, and consider breaking up batches into smaller components.  If this request is for a SharePoint list or list item, you may be able to resolve this by reducing the number of fields. 1971313a-6baa-49e9-bace-d024ce67f25c
    03-19-2014 13:49:51.87 w3wp.exe (0x2098) 0x23BC SharePoint Foundation Database fa43 High Slow Query Duration: 127.1515 1971313a-6baa-49e9-bace-d024ce67f25c
    03-19-2014 13:49:51.87 w3wp.exe (0x2098) 0x23BC SharePoint Foundation Database fa44 High Slow Query StackTrace-Managed:    bij Microsoft.SharePoint.Utilities.SqlSession.OnPostExecuteCommand(SqlCommand command,
    SqlQueryData monitoringData)     bij Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQueryData monitoringData, Boolean retryForDeadLock)     bij Microsoft.SharePoint.SPSqlClient.ExecuteQueryInternal(Boolean
    retryfordeadlock)     bij Microsoft.SharePoint.SPSqlClient.ExecuteQuery(Boolean retryfordeadlock)     bij Microsoft.SharePoint.Library.SPRequestInternalClass.CrossListQuery(String bstrUrl, String bstrXmlWebs, String
    bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter pCallback, Object& pvarColumns)     bij Microsoft.SharePoint.Library.SPRequest.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter
    pCallback, Object& pvarColumns)     bij Microsoft.SharePoint.SPWeb.GetSiteData(SPSiteDataQuery query)     bij Microsoft.SharePoint.Publishing.CachedArea.GetSiteData(SPWeb web, SPSiteDataQuery siteDataQuery, Boolean
    useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.CachedArea.GetCrossListQueryResults(SPSiteDataQuery query, SPWeb currentContext, Boolean onlyPopulateCache, Boolean useSpQueryOnList, Int32 lcid)     bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(CachedArea
    cachedArea, SPWeb web, SPSiteDataQuery query, Boolean useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(CachedArea ca, Boolean useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(SPSite
    site, String webUrl, Boolean useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.WebControls.ContentByQueryWebPart.IssueQuery()     bij Microsoft.SharePoint.Publishing.WebControls.ContentByQueryWebPart.GetXPathNavigator(String
    viewPath)     bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform)     bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.PerformSelect()    
    bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.DataBind()     bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.EnsureDataBound()     bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.CreateChildControls()    
    bij System.Web.UI.Control.EnsureChildControls()     bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Control.PreRenderRecursiveInternal()    
    bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Page.ProcessRequestMain(Boolean
    includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     bij System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     bij System.Web.UI.Page.ProcessRequest()    
    bij System.Web.UI.Page.ProcessRequest(HttpContext context)     bij ASP.BLANKWEBPARTPAGE_ASPX_1653093133.ProcessRequest(HttpContext context)     bij Microsoft.SharePoint.Publishing.TemplateRedirectionPage.ProcessRequest(HttpContext
    context)     bij System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     bij System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)    
    bij System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)     bij System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)     bij System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest
    wr, HttpContext context)     bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr
    managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32
    flags)     bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) 1971313a-6baa-49e9-bace-d024ce67f25c

  • FM HRTRV_IF_GET_TRIP does not return USERDATA

    Hi, it's me, yet again...
    I'm using the FM "HRTRV_IF_GET_TRIP" in FITE_VC_GENERA_DATA in a post exit of comp-controller method "ON_SHOW" to get the structure/Table USER/PTK99 from the TE Cluster for binding to the context afterwards. At least that's the plan. The FM does not return me the data I expect in parameter USERDATA, although there is data in the TE Cluster and within the FM, I can see the global Table USER being filled whilst the macro RP-IMP-C1-TE. But this data is not further process neither is seems the strucutre USERDATA to be touched at any point of the FM. Am I calling the FM 'wrong' in any way? I'm close to making an implicit enhancement at the end and forcefully fill userdata from user....
    Too long, didn't read: USERDATA is not returned filled --> WHY?
    CALL FUNCTION 'HRTRV_IF_GET_TRIP'
      EXPORTING
        employeenumber             = wd_assist->GS_COMMON_RFC_INPUT-employee_number
        tripnumber                 = lv_tripno
    *   LANGUAGE                   = SY-LANGU
    *   CALCULATE_AMOUNTS          = 'X'
    *   GET_TRIP_FROM_MEMORY       = ' '
      IMPORTING
    *   FRAMEDATA                  =
    *   STATUS                     =
        USERDATA                   = ls_user " should contain cluster values, but it doesn't
      tables
    *   RECEIPTS                   =
    *   ADDINFO                    =
    *   GUESTS                     =
    *   TEXT                       =
    *   MILEAGE                    =
    *   STOPOVER                   =
    *   DEDUCTIONS                 =
    *   COSTDIST_TRIP              =
    *   COSTDIST_STOP              =
    *   COSTDIST_RECE              =
    *   COSTDIST_MILE              =
    *   AMOUNTS                    =
    *   ADVANCES                   =
        return                     = lt_bapiret " says method was executed successful
    In the insides of the FM:
    *  IF CALCULATE_AMOUNTS <> 'X'. "XJY
    * import the trip because it was NOT imported before
      READ TABLE T_PERIO INDEX 1.
      TE-KEY-PERNR = T_PERIO-PERNR.
      TE-KEY-REINR = T_PERIO-REINR.
      TE-KEY-PERIO = T_PERIO-PERIO.
      TE-KEY-PDVRS = T_PERIO-PDVRS. " Once this line is executed, the global table USER is fileld with the data I expect
      RP-IMP-C1-TE.
    *  ENDIF. "XJY
      if t_perio-abrec = '0' or
         t_perio-abrec = '1'.
        clear te-key-pdvrs.
        import beler from memory id te-key.
      endif.
    I hope somebody has ever used this one and can tell me what I'm doing wrong...
    Cheers, Lukas

    good to know. that you have already implemented similar thing. In our case if employee want to pick a manager he will only be given option from a custom table entries.
    They way i was thinking was that there will be a checkbox that will say "Override Approver"
    and when that will be checked text filed will be enabled with search help restricted to custom table entries.
    I have one question. When I am enhancing FITE_VC_REVIEW and adding field in that view, I m finding it hard to track it. Looks like adding to General data screen will be much easier.
    R u using ABAP memory to track field and use it at SMOD or you are using SAP memory ?
    I am just starting on this one and not expert at webdynpros.. will ping you if i need any more help
    and yes i just added following like in FM HRTRV_IF_GET_TRIP
    read TABLE user INTO userdata INDEX 1
    to get it to load userdata..

  • WebI does not return failed when scheduling a report which only holds parti

    WebI does not return failed when scheduling a report which only holds partial results.
    We have scheduled reports which take some time to run. When they are scheduled they sometimes show successful even though the report only holds partial results. The only indication is when you open the report as webi report you see the warning that it holds partial results.
    When running the report manually, it works file.
    The issue is not in the no of rows in the universe settings because we this unselected. The issue is that it times out.
    The reason that it times out is that a lot of resources are used for loading and processing data when the report is scheduled. When running it manually, it works because at this time the serverload is less. the time in the universe is set to 10 min.
    The version we have is BOXIR2-SP4.
    Ok. Issue identified.
    The question is - why is the report successful when it holds partial results? If this is normal behavior, noone can really trust the scheduled reports, especially when you save it to excel and send it by mail.
    Is there a solution for this except increasing the allowed query time which would not solve the issu but only allow more reports to complete?
    Edited by: Karlgren Michael on Sep 17, 2009 1:22 PM

    Hi ,
    Currently this problem exists in XI R2. This feature will be part of thenext Service Pack i.e XI R2 SP6.
    This CER will be delivered from IDC Webi and BIP Platform as part of Jupiter Sp6.
    Problem Statement:
         Scheduled WebI Reports which are partially refreshed are distributed to the destinations for Users to View and make decisions. These users arenu2019t usually aware that these reports have u201CPARTIAL RESULTSu201D
    Recomended Solution:
        Allow the Schedule Creator / Modifier to set a parameter to stop the distribution of the u201CPARTIALLY REFRESHEDu201D WebI report.
    Thanks
    Salini

  • WB_RT_GET_JOB_METRICS does not return values

    DB v 10.2.0.2
    OWB repository/client v 10.2.0.3
    A DB function has a call to the Control Center transformation WB_RT_GET_JOB_METRICS to extract and preserve the metadata of number of records inserted/updated/deleted in a DB table.
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    1.
    The control center transformation WB_RT_GET_JOB_METRICS does not return any values when used under the Post-Mapping Process(mapped to the DB function describe above) in a Map.
    The input parameter ;Audit Id' to the Map is passed from a calling Process Flow. The following query is used to retrieve the Audit Id of the Map.,
    SELECT execution_audit_id
    INTO l_audit_id
    FROM ALL_RT_AUDIT_EXECUTIONS
    WHERE parent_execution_audit_id = P_AUDIT_ID;
    And the retrieve l_audit_id is passed to the WB_RT_GET_JOB_METRICS transformation to extract the number of records inserted/deleted/updated with the execution of the map.
    Gurus, please advice if the approach is appropriate to retrieve the number of records inserted/deleted/updated by the execution of the map. If not, any alternate method.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    2. The control center transformation WB_RT_GET_JOB_METRICS returns values when used in a standalone pl/sql block with the appropriate audit_id.
    Is this because the metadata for the Map execution is complete, whereas in the earlier attempt, the transformation is called within the map using the Post-Mapping process.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    3. Since the option 1 did not return any value, tried other option of calling/executing a transformation(call the the DB function mentioned earlier) after the Map activity is successful in a ProcessFlow. Here, the transformation does not seem to be executing, any tips of correcting this issue.
    Request the forum for some helpful tips to resolve the problem. TiA (Thanks in Advance) for the response.
    Message was edited by:
    user599655

    In a process flow, passed the pseudo variable to a transformation to run the WB_RT_GET_JOB_METRICS after the map execution. I am not sure if this is the best solution, but it worked for me.
    Still trying to figure how to use the pre-defined transformation when working on expression.
    Thanks.

  • Content scope document library does not return result for non farm administrator

    Hi
    I have a situation where I had to go with a unique permission applied subsite to store 1000 documents in the document library. This site has a set of 50 users. I was able to create content scope and library path for search. It returns results for me(creator/owner/administrator)
    however if I add other users as contributor or full permission, even after full crawling it does not return result for others.
    I saw some article that security broken site wont be indexed normal way and to include and I did that as well but no result for other users. I always get result.
    Please suggest if there are any specific security permissions that I need to include, so the document library target search will return result for others.
    Thanks
    Shri

    Hi Shri,
    For administrator search results, it looks like the documents could be crawled and searched.
    For other users you grant full control permission on subsite with unique permission where you store 1000 dcouments in document library, please make sure these 50 users have access permission(at least view permission) on documents from the
    library, then test again.
    Also test if users search on search center site without search scope, see if it's scope issue or search web part issue.
    If above doesn't work, please check ULS log for related useful information around the time when users search the documents, there should be more info to verify if issue is related to unique permision.
    Thanks,
    Daniel Yang
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • BAPI_SALESORDER_SIMULATE does not return multiple errors

    Hi,
      We are using BAPI_SALESORDER_SIMULTE, but it does not return multiple errors in the MESSAGETABLE even if all the materials entered in the ITEMS_IN table are wrong or have some ATP issues. It returns the first material that has problem and doesnot find errors with the remaining.
    Can anyone tell why this is happeining. Is there a setting in customizing to get the BAPI to return all possible errors.
    Thanks in advance

    Hello Pulin
    This is a typical behaviour of BAPI. Due to the fact that they validate all incoming data very scrupulous they stop processing at the very first error.
    I would assume that a "SIMULATE" BAPI should show all errors (because that's why we simulate, isn't it?) but apparently this is not the case.
    Regards
      Uwe

  • Function does not return a value

    CREATE OR REPLACE PACKAGE BODY Promo_Version_Logo_Pkg IS
      FUNCTION Promo_Version_Logo_Rule(Rc IN test.Ot_Rule_Context)
        RETURN Ot_Rule_Activation_Result
       IS
        PRAGMA AUTONOMOUS_TRANSACTION;
        v_Result NUMBER;
        CURSOR Cur_Promo_Logos IS
          SELECT Pvlo.Promo_Id,
                 Evt.On_Date,
                 Evt.Channel_Id,
                 Evt.Start_Time,
                 Evt.Duration,
                 Pvlo.Logo_Id
            FROM Event                  Evt,
                 Event_Technical_Data   Etd,
                 Promo_Version_Logo_Opt Pvlo,
                 Promo_Timing           Pt
           WHERE Evt.Event_Technical_Data_Id = Etd.Event_Technical_Data_Id
                 AND Etd.Promo_Timing_Id = Pt.Promo_Timing_Id
                 AND Pt.Promo_Timing_Id = Pvlo.Promo_Timing_Id
                 AND Evt.Channel_Id = Rc.Channelid
                 AND Evt.On_Date >= Rc.Fromdate
                 AND Evt.On_Date <= Rc.Todate
                 AND Evt.Day_Type_Id = Rc.Daytype;
      BEGIN
        FOR Each_Record IN Cur_Promo_Logos LOOP
          v_Result := Testing_Pkg.Insert_Event(v_Channel_Id   => Each_Record.Channel_Id,
                                                           v_Tx_Time      => Each_Record.Start_Time,
                                                           v_Tx_Date      => Each_Record.On_Date,
                                                           v_Content_Id   => Each_Record.Logo_Id,
                                                           v_Duration     => Each_Record.Duration,
                                                           v_Event_Type   => Uktv_Tools_Pkg.c_Logo_Kind_Code,
                                                           v_Container_Id => Each_Record.Promo_Id);
          IF v_Result = -1
          THEN
            EXIT;
          END IF;
        END LOOP;
      END Promo_Version_Logo_Rule;
    END Promo_Version_Logo_Pkg;why do I get this "Hint: Function 'Promo_Version_Logo_Rule' does not return a value" after I compile it? The Testing_Pkg.Insert_Event should insert some values somewhere...I just want to try to test it before I move on onto the next bit of it, but I do not understand what I am doing wrong...
    Thanks

    You need something like:
        END LOOP;
        RETURN v_Result;  -- if this is what you are trying to get the function to do
        EXCEPTION
          WHEN OTHERS THEN
          <exception handling/logging - whatever you want>
          RAISE;  --this with then raise an error back to the calling process
      END Promo_Version_Logo_Rule;This way the function either returns a value, or an exception which can be handled in the calling procedure

  • UPDATE ... RETURNING does not return new value

    Hi all,
    I've created the following objects in Oracle DB 10.2.0.3.0:
    CREATE TABLE TAB1
         ID          NUMBER          PRIMARY KEY,
         EDITED_AT     DATE,
         VALUE          VARCHAR2(64)
    CREATE SEQUENCE S_TAB1
         INCREMENT BY 1
         START WITH 1;
    CREATE TRIGGER T_TAB1_BIE
    BEFORE INSERT OR UPDATE ON TAB1
    FOR EACH ROW
    BEGIN
         IF INSERTING THEN
              SELECT S_TAB1.NEXTVAL INTO :NEW.ID FROM DUAL;
         END IF;
         :NEW.EDITED_AT := SYSDATE;
    END;
    /Then I tried to do the following in SQL Plus:
    SQL> insert into tab1(value) values('ddd');
    1 row created.
    SQL> commit;
    Commit complete.
    SQL>
    SQL> select * from tab1;
            ID EDITED_AT           VALUE
             1 27.03.2008 17:01:24 ddd
    SQL>
    SQL> declare dt date; val varchar2(64);
      2  begin update tab1 set value = 'ddd' where id = 1 returning edited_at, value into dt, val;
      3  dbms_output.put_line('txt = ' || dt || ', ' || val);
      4  end;
      5  /
    txt = 27.03.2008 17:01:24, ddd
    PL/SQL procedure successfully completed.
    SQL>
    SQL> select * from tab1;
            ID EDITED_AT           VALUE
             1 27.03.2008 17:02:12 ddd
    SQL>As it can be seen Returning clause of an Update statement does not return a new date, i.e. 27.03.2008 17:02:12, that was updated by the trigger, it returns an old one - 27.03.2008 17:01:24. Please advise me why Database returns an old value? I do believe that UPDATE ... RETURNING ... statement should return new, generated by the trigger, value.
    Thanks in advance.
    Regards,
    Yerzhan.

    you need to explicitly include the column in your UPDATE statement SET clause that you expect to return the result you want it to be. here's what i think what happened even though you have a trigger the first statement that was processed was your update statement. at the time of the update it has to return the current values to the returning clause that is the values on the table. now comes next the trigger which gives edited_at column a new value. when the trigger got fired the process don't return anymore to the UPDATE RETURNING statement. it's like each sequence of codes does not executes in parallel.
      SQL> CREATE TABLE TAB_1
        2  (
        3   ID  NUMBER  PRIMARY KEY,
        4   EDITED_AT DATE,
        5   VALUE  VARCHAR2(64)
        6  );
      Table created.
      SQL> CREATE SEQUENCE S_TAB1
        2   INCREMENT BY 1
        3   START WITH 1;
      Sequence created.
      SQL> CREATE TRIGGER T_TAB1_BIE
        2  BEFORE INSERT OR UPDATE ON TAB_1
        3  FOR EACH ROW
        4  BEGIN
        5   IF INSERTING THEN
        6    SELECT S_TAB1.NEXTVAL INTO :NEW.ID FROM DUAL;
        7   END IF;
        8   :NEW.EDITED_AT := SYSDATE;
        9  END;
       10  /
      Trigger created.
      SQL> insert into tab_1(value) values('ddd');
      1 row created.
      SQL> commit;
      SQL> select * from tab_1;
              ID EDITED_AT            VALUE
               1 28-mar-2008 10:31:18 ddd
      SQL> declare dt date; val varchar2(64);
        2  begin update tab_1 set value = 'ddd', edited_at = sysdate
        3        where id = 1 returning edited_at, value into dt, val;
        4  dbms_output.put_line('txt = ' || dt || ', ' || val);
        5  end;
        6  /
      txt = 28-mar-2008 10:32:39, ddd
      PL/SQL procedure successfully completed.
      SQL> select * from tab_1;
              ID EDITED_AT            VALUE
               1 28-mar-2008 10:32:39 ddd
      SQL>

  • Runtime.getRuntime().exec() does not return

    Hello,
    I am running into a case where the call to Runtime.getRuntime.exec(command) does not return. The scenario is that the main thread spawns another thread which calls the Runtime.exec(). Since the call does not return, both threads seems to be hung. The jstack output from the main thread shows
    ----------------- t@2 -----------------
    0xfeedab45 ___lwp_cond_wait + 0x15
    0xfeb4030d void os::PlatformEvent::park() + 0xa9
    0xfebadd48 void ObjectMonitor::wait(long long,bool,Thread*) + 0x26c
    0xfe770287 void ObjectSynchronizer::wait(Handle,long long,Thread*) + 0xef
    0xfe76ffbb JVM_MonitorWait + 0x20f
    0xfb20a032 * java.lang.Object.wait(long) bci:0 (Interpreted frame)
    0xfb20308d * java.lang.Thread.join(long) bci:38 line:1143 (Interpreted frame)
    0xfb20308d * java.lang.Thread.join() bci:2 line:1196 (Interpreted frame)
    0xfb20308d * DataLoader.checkThreadGroup() bci:92 line:316 (Interpreted frame)
    0xfb202f27 * DataLoader.checkTables(int) bci:1 line:336 (Interpreted frame)
    0xfb202f69 * DataLoader.runLoad(int, java.lang.String, java.lang.String, java.lang.String, com.sabre.fltsked.apm.util.FSIOHelper)
    ... more below ....
    So it is waiting for the spawned thread on a join()
    And the jstack dump for the thread that called exec() is
    ----------------- t@70 -----------------
    0xfeed7409 __lwp_park + 0x19
    0xfeed1be7 cond_wait_queue + 0x5e
    0xfeed1f64 cond_wait_common + 0x1db
    0xfeed20d2 condwait + 0x7b
    0xfeed20fd cond_wait + 0x21
    0xfeed2136 pthread_cond_wait + 0x1b
    0x9741082a soft_delete_object_cleanup + 0x57
    0x97410906 soft_delete_object + 0x5b
    0x97410953 soft_delete_all_objects_in_session + 0x2e
    0x97407b7a soft_delete_session + 0xec
    0x97407860 soft_delete_all_sessions + 0x3c
    0x97402525 finalize_common + 0x66
    0x974026ae softtoken_fini + 0x34
    0x974355f9 _fini + 0x21
    0xfefdd49a remove_hdl + 0x766
    0xfefd8be9 dlclose_core + 0xb1
    0xfefd8c1d dlclose_intn + 0x21
    0xfefd8c96 dlclose_check + 0x2a
    0xfefd8d00 dlclose + 0x38
    0x97480aeb pkcs11_slottable_delete + 0xb1
    0x9747c691 finalize_common + 0xe2
    0x9747c6e0 pkcs11_fini + 0x3e
    0x9747c3bf pkcs11_fork_child + 0x73
    0xfee628b8 postforkchild_handler + 0x2f
    0xfeeca9ec fork + 0x12e
    0xfe338029 Java_java_lang_UNIXProcess_forkAndExec + 0x395
    0xfb20a032 * java.lang.UNIXProcess.forkAndExec(byte[], byte[], int, byte[], int, byte[], boolean, java.io.FileDescriptor, java.io.FileDescriptor, java.io.FileDescriptor) bci
    :0 (Interpreted frame)
    0xfb202f69 * java.lang.UNIXProcess.<init>(byte[], byte[], int, byte[], int, byte[], boolean) bci:62 line:53 (Interpreted frame)
    0xfb20308d * java.lang.ProcessImpl.start(java.lang.String[], java.util.Map, java.lang.String, boolean) bci:182 line:65 (Interpreted frame)
    0xfb202f27 * java.lang.ProcessBuilder.start() bci:112 line:452 (Interpreted frame)
    0xfb202f27 * java.lang.Runtime.exec(java.lang.String[], java.lang.String[], java.io.File) bci:16 line:593 (Interpreted frame)
    0xfb202f27 * java.lang.Runtime.exec(java.lang.String, java.lang.String[], java.io.File) bci:69 line:431 (Interpreted frame)
    0xfb202f27 * java.lang.Runtime.exec(java.lang.String) bci:4 line:328 (Interpreted frame)
    0xfb202f27 *SQLLoad(java.lang.StringBuffer) bci:181 line:51 (Interpreted frame)
    0xfb202e61 *FSLoadThread.run() bci:84 line:54 (Interpreted frame)
    The command I am trying to exec is "sqlldr" and I do have it in my PATH variable. Why is that the call to exec does not return? Any ideas?
    This is on jdk1.6.0_17
    Thanks,
    Bijoy.

    It has definitely forked, and this is the child process. It says so. If it was the parent process it would just show Java code related to launching processes. That does not involve PKCS11. After the fork there are two identical processes with the same stack: the child process of the fork goes on to replace itself with the target command via Unix exec(), which it doesn't look like it is succeeding at. The parent process doesn't do much at all, probably just housekeeping and then a Unix wait() for Process.waitFor() to hook into.

  • NX-OS snmp-trap strdata does not return string sent from device to object server

    NX-OS snmp-trap strdata does not return string sent from device to object server
    Applet was created:
        event manage applet TEST_VPC
        description "%ETHPORT-5-IF_DOWN_ADMIN_DOWN"
        event syslog occurs 1 priority 4 pattern "%ETHPORT-5-IF_DOWN_ADMIN_DOWN"
        action 1.0 snmp-trap strdata "Loopback0 is admin down"
    after event is generated (link admin down), trap is sent to snmp server, but string does not appear in received messages:
    2014-03-17T04:29:26: Debug: D-P_M-105-000: 1 trap in queue
    2014-03-17T04:29:26: Debug: D-P_M-105-000: V2/V3 trap/inform received
    2014-03-17T04:29:26: Information: I-P_M-104-000: Number of items in the trap queue is 0
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] ReqId: 1427018637
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] community: xxxx
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] IPaddress: x.x.x.x
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] PeerIPaddress: x.x.x.x
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] ReceivedPort: 162
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] ReceivedTime: 1395044966
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] Protocol: UDP
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] SNMP_Version: 2
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] UpTime: 1166940388
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] Uptime: 1:30:03.88
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] .1.3.6.1.2.1.1.3.0: (1166940388) 135 days, 1:30:03.88
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] notify: .1.3.6.1.4.1.9.9.43.2.0.2
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] .1.3.6.1.6.3.1.1.4.1.0: .1.3.6.1.4.1.9.9.43.2.0.2
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] OID1: .1.3.6.1.4.1.9.9.43.1.1.1.0
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] 1: (1166939868) 135 days, 1:29:58.68
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] 1_raw: (1166939868) 135 days, 1:29:58.68
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] 1_text: (1166939868) 135 days, 1:29:58.68
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] 1_hex: (1166939868) 135 days, 1:29:58.68
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] .1.3.6.1.4.1.9.9.43.1.1.1.0: (1166939868) 135 days, 1:29:58.68
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] OID2: .1.3.6.1.4.1.9.9.43.1.1.6.1.6.36
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] 2: 4
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] 2_raw: 4
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] 2_text: 4
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] 2_hex: 4
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] .1.3.6.1.4.1.9.9.43.1.1.6.1.6.36: 4
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] Node: xxx
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] PeerAddress: xxxx
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] EventCount: 360
    2014-03-17T04:29:26: Debug: D-UNK-000-000: [Event Processor] Processing alert {0 remaining} 
    please help figure this out

    This is a CISCO-CONFIG-MAN-MIB trap, not an EEM trap.  I don't think your EEM applet is being triggered since you have that priority argument in there.  Try removing that and leave the syslog pattern alone.  You will see the string as a varbind in the trap.

  • Automator - Run Shell Script - Does not return when script launches firefox

    Automator does not work the same on my MacBooks as my Mac mini! Both are latest Snow Leopard. I'm trying to automatically setup my MacBook after it decides if I'm at work, or elsewhere.
    The Automator Action "Run Shell Script" (Shell: /usr/bin/perl) does NOT return control when attempting to launch Firefox:
    system("/Application/Firefix.app/Contents/MacOS/firefox-bin -private news.google.com &");
    Note: the ampersand should cause Firefox to start as a background process.
    It only returns control after I close Firefox. I have a "Show Growl Notification" as the second action, so I know that the first action has not completed. Odd thing is that this works on my Mac mini. I also noticed that another difference: on my MacBook status is displayed in the top toolbar when the Automator application is running.
    Any ideas?

    Thanks, it worked. I forgot about stderr and stdin.
    I'm using Perl as it is part of a bigger script. I can quickly and easily figure out if I am at work where my MacBook is plugged into a network:
    my $ethernet = qx(ifconfig en0) =~ m{status:.active}xms;
    if ($ethernet) {
    # setup stuff for work environment
    } else {
    # setup stuff for mobile environment
    }

  • My PC does not return to the source document I print from

    I had a setting control for
    this in XP but can't find the page I got it from.<o:p></o:p>
    <o:p> </o:p>
    In ANY application or browser
    this happens.  I print from a specific Excel workbook, by example, when I
    have a number of them open.  The system does not return to the workbook I
    printed from.  This is maddening and causes all kinds of issues.
     Searching the web for this now produces nothing and I know I can't be the
    only person who experiences this.<o:p></o:p>
    <o:p> </o:p>
    This is a Windows 7 platform
    in a networked business environment.  I'm running the Classic Menu add-in
    from Addintools because I can't stand the ribbon and have never liked it.
     In Windows 7, I'm running a couple of other add-ins that restore the XP
    use of the task bar properly so one can work efficiently.<o:p></o:p>
    <o:p> </o:p>
    None of the add-ins are what
    is causing this issue because I'd run the same Classic Menu add-in on the XP
    box and it had the same issue until I found the work-around that I can't
    remember now.<o:p></o:p>
    <o:p> </o:p>
    Has anyone else experienced
    this issue?<o:p></o:p>
    <o:p> </o:p>
    Jeff Lynch<o:p></o:p>

    Hi,
    "I print from a specific Excel workbook, by example, when I
    have a number of them open.  The system does not return to the workbook I
    printed from."
    If I'm not misunderstanding, do you mean that the workbook is automatically closed after you print from that workbook, right?
    As I know, if we use the default ribbon in Excel, no matter in Windows XP or Windows 7, the opened workbook should be stay opened after you print from that Excel workbook.
    So the question is that: what is the version of office? What is the Classic Menu add-in you're running now? Did you manually download and install it to your system? Could you please share a picture with us about the add-ins you're using?
    Yolanda Zhu
    TechNet Community Support

  • Very Very Urgent Issue: Restricted Key Figure does not return any data

    Hi all,
    Please help me solving this urgent issue.
    created customer exit variable on characterstics version and also
    other customer exit variable on Value type.
    I coded that in variable exit. Problem is when I include these in
    restrickted keyfigure My query does not return me any data.
    But if I remove from restrickted key firgure and put it as normal
    charaterstics I see the variable is getting populated.
    Also in RSRT the SQl generated when these are included in RKF is not
    correct.
    I debugged and know they are getting populated. As when included in RKF
    I can also see the values of customer exit variables from information
    tab.
    I also know that there is data in cube for those restrictions.
    I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
    FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
    Thanks
    SAP BW
    **Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any data

    Hi,
    Everyone out there this is very urgent. If someone can help me solving this problem.
    We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
    I posted one oss notes also regarding this issue. But got no reply from SAP.
    So, Please help me solving this issue.
    Thanks
    SAP BW

Maybe you are looking for

  • MS-Accelerator V2 Failure to create a DirectX 9 device

    Hi~I run a sample of Microsoft Accelerator V2 on my computer. when I run an applications using DX9Targets in visual studio 2012, a error shown up: Failure to create a DirectX 9 device. There are two graphics card in my computer,one is Intel HD graphi

  • Mac Mini does not display HDMI 1080i in full screen on TVs

    I have a 1.66 GHz Intel Core Duo Mac Mini that I am having problems getting video to display 1920 x 1080 @60hz in full screen on my Sony XBR 1080p HDTV. The Mac is connected to the TV via a DVI to HDMI cable. The Mac recognizes the display as a "Sony

  • How to send a predefined email

    Hello, I'm trying to send a predefined email which contains the subject and the body text in my bsp/abap application but it doesn't work. <i><b>Does anyone could help me, please?</b></i> I have this error message : <b>Exception  CX_SY_DYN_CALL_PARAM_

  • Deleting texts in ios8

    How can I delete texts from a conversation in iOS8 without deleting the entire conversation?

  • Command to compile all installed packages

    hi to all, exist a command to compile all packages are installed in your system ? thanks