DBACOCKPIT and Missing Index
Hi,
is there any way to create a missing index from DBACOCKPIT as old DB02 on Oracle, MSSQL, DB2, ecc.? I'm not able to find it
Thank you.
Hi.
The rebuild of an index is done by the DDIC transactions on all the other platforms, too. There is a link in the DBA Cockpit to this feature but this is only working for the local system (or maybe if an RFC-connection is provided which is not used in most remote monitoring cases). The remote monitoring using just a database connection which is the default for all database platforms since approx 10 years, is not able to recreate an index on a remote system. The code for the missing tables and index check in the DBA Cockpit is DB independent to a very large extent. You can check if creating an index in the DBA Cockpit works on the local system for ASE, too. I don't have a system to check at hand (vacation). On ASE we have the goal to offer all features in the Cockpit for both remote and local databases with the same feature set without using RFC as the remote system might not be running ASE. And the DDIC check is so far the only screen that does not work this way. Unfortunately this cannot be changed without a huge redesign of the DDIC.
Regards,
Jan
Similar Messages
-
I have been working on the same numbers file for the past few weeks. The last time I opened it was 1 week ago. Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing.
Hi Tracie,
I upgraded to Maverick OS X 10.9.5, numbers spreadsheet is saved. Upon re-opening, it appears to be frozen, a warning "file is invalid as index.xml file is missing". I checked, and the file is not "locked". This appears to occur only with using the new numbers app. When I open previous spreadsheets from old iWorks, no such problem occurs.
How did you resolve your problem?
Would appreciate any help here.
Thanks,
Deehay -
Dear all,
This is about a BW 3.5 system running Oracle 10.2.0.2 on Solaris 10
After an online database reorganisation, I receive these messages in db13
BR0970W Database administration alert - level: ERROR, type: MISSING_INDEX, object: (table) SAPR3./BI0/F0BWTC_C02
BR0970W Database administration alert - level: ERROR, type: MISSING_INDEX, object: (table) SAPR3./BI0/F0BWTC_C05
According to the logs, the tables above have been reorganised successfully.
I see the missing indexes in db02 under Missing Indexes:
Secondary indexes 13
/BI0/F0BWTC_C02-070
/BI0/F0BWTC_C02-060
/BI0/F0BWTC_C02-050
/BI0/F0BWTC_C02-040
/BI0/F0BWTC_C02-020
/BI0/F0BWTC_C02-010
/BI0/F0BWTC_C05-070
/BI0/F0BWTC_C05-060
/BI0/F0BWTC_C05-050
/BI0/F0BWTC_C05-040
/BI0/F0BWTC_C05-020
/BI0/F0BWTC_C05-010
/BIC/FZ_CPLN_00-900
If I try to select one and click on create in db, I get a short dump
Runtime Error RAISE_EXCEPTION
Date and Time 23.08.2007 11:12:13
ShrtText
Exception condition "STORAGE_NOT_DETERMINATED" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
A RAISE statement in the program "SAPLSDB2" raised the exception
condition "STORAGE_NOT_DETERMINATED".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
173 else.
174 storage_source_hierarchy-dbr = 'X'.
175 endif.
176 storage_source_hierarchy-cmt = 'X'.
177 storage_source_hierarchy-cmp = 'X'.
178 if dbtabname ne space and dbtabname ne tabname.
179 perform shdupg_get_index_storage tables storpar
180 using dbsys prid tabname indexname storage_source_hierarchy
181 dbindex_of_origtable dbprimindex_of_origtable
182 changing rc.
183 else.
184 call function 'DB_STORAGE_GET'
185 exporting
186 dbsys = dbsys
187 prid = prid
188 tabname = tabname
189 indexname = indexname
190 dbindex = realname
191 dbrefindex = name_of_primidx
192 source_hierarchy = storage_source_hierarchy
193 tables
194 storpar = storpar
195 exceptions
196 mapping_error = 1
197 db_error = 2
198 uncomplete_parameter = 3
199 others = 4.
200 rc = sy-subrc.
201 endif.
202 if rc ne 0.
>>>> raise storage_not_determinated.
204 endif.
205
206 * Progamm generieren
207 perform db_get_progname using 'SDB2F' dbsys changing sdb2fdbs.
208 refresh statements.
209 perform gen_create_index in program (sdb2fdbs)
210 tables ddfldnames storpar loc_stmt
211 using tabname indexname realname unique dbsys rc.
212 if rc <> 0.
213 *KUGL-protocol-270694
214 perform stdo_sam1
215 using prid max_severity msgid '122' realname.
216 raise program_not_generated.
217 endif.
218 statements[] = loc_stmt[].
219
220 perform create_index_finish tables loc_stmt
221 using tabname realname dbsys no_exec rc.
222 if rc <> 0. raise program_not_generated. endif.
Any ideas?
Many thanks
AndreasHi,
Please check following note:
Note 703304.
You may have to import correction against your release.
Regards,
Payal Patel -
Missing indexes after system copy
Hi All
we have around 70,000 missing indexes after the system copy
offline export from
source with sun solaris oracle
To
Linux oracle
but these appeared after we Run SGEN , which took 60 hours for a 200 Gb database.
and target system response is also slow , how to go ahead with this issue
we have checked export and import logs , none of the packages were missed
1 Why these missing indexes after SGEN , and why SGEN for 60 hours
2 when we check the Tables which appeared in Missing indexes ,from SE14 it says In Consistency with Data dictionary
3 and the other error , is Index Missing in the database ,
4 but we cant create all these manually.
RegardsHi Matt
Thanks for the response
After sap suggestion , we have done only import again, with 721 R3load same as export.
but still the R3load.exe.log of import shows as done with 720 kernel.
import R3load.exe log //bas/720_REL/src/R3ld/R3load/R3ldmain.c#
export R3load.exe log //bas/721_REL/src/R3ld/R3load/R3ldmain.c#10 $ SAP
But when we compare the sapinst_dev and AGR logs both from export and import
both are referring the same 721 R3load version ,
//bas/721_REL/src/R3ld/R3load/R3ldmain.c
still we have same missing indexes issue , after we did the import again.
Are we making any mistakes in export , Any suggestions are welcome
hi all , kindly respond with your inputs , on this
Regards -
Hi,
In tcode DB02, when seeing database statistics, i found that there were some missing indexes in database. ie., for some tables there are no indexes created.
Please tell me whether we need to create indexes or not. Is there any serious effect of a table not having any index?
Please suggest me a good solution for this.
Thanks,
Sailesh KNot necessarily. You must decide if an index will assist in making a table scan faster. FULL table scans indicate that an index is not available. Creating an index in this case, will improve preformance and prevent full table scans from occuring.
Also, check oracle to see if the index exists. Somestimes the Data Dictionary is unaware of the index due to how it ws created.
In summary missing indexes are not a problem. FULL table scans are problems and require new indexes to be created for performance reasons.
Hope this helps. -
Hi Gurus!
I have a critical problem to solve.
I have a table without data which is inconsistent because it doesn't have the primary index. When i see missing indexes at DB02, the system tells me that the index is created, but when i go to SE14 and select the primary index, it says the index does not exists on the database and the only option that is active is the one to create the index. If I try to create the index, i get an error saying: there is already a an object named 'zmed_distr~0' ( my index name ).
Can anybody help me?
Thank you in advance.the tsystem does'nt create the index and give me this log:
Request: Create Index ZMED_DISTR-0 (FORM05/11.12.07/19:06)
Process: BLADE04_0
sql:
ALTER TABLE [ZMED_DISTR]
ADD CONSTRAINT [ZMED_DISTR~0]
PRIMARY KEY CLUSTERED
( [MANDT] ,
[ZUONR] ,
[GJAHR] ,
[KUNNR] ,
[ESTAB] ,
[TXT20] ,
[REPS] )
There is already an object named 'ZMED_DISTR~0' in the database.Could
not create constraint. See previous errors.
DDL time(___1): .........3 milliseconds
The SQL statement was not executed
Index could not be created completely in the database
Index ZMED_DISTR-0 could not be created
Request for ZMED_DISTR could not be executed -
In - DB13 - warnings for missing indexes
Hi
I've noticed in the results of the DBCHECK job in DB13 that we have a number of warnings for missing indexes.
BR0970W Database administration alert - level: ERROR, type: MISSING_INDEX, object: (table) SAPR3./BI0/PCOSTELMNT
The strange thing is that no missing indexes are picked up be DB02. In SE11 these tables cannot be found. Checked at Oracle level and the tables exist but the indexes do not.
Does anyone know if these tables should have indexes?
If so what would be the best way to create these?
Thanks & Regards
ShishirIn DB02 they are probably showing under 'Optional Indexes' under 'not created'
-
Hi All,
We have a Database with many tables using foreign keys. Some of my queries from coldfusion are slow. We are using 11g version.
It's a way to check for missing indexes?
I would like to help the database to perform better, I know this is a huge topic but as new in oracle I need to start somewhere.
Any links or comments will be appreciate it.
Regards
Johnnyi have created a two step process for finding which Foreign key is not indexed
1. create a table having the ddl of all indexes
CREATE TABLE INDEX_TXT_TBD AS
SELECT DBMS_METADATA.GET_DDL('INDEX',INDEX_NAME) TXT FROM USER_INDEXES WHERE INDEX_TYPE='NORMAL' AND INSTR(INDEX_NAME,'$') = 0
2. create a table which will tell the tablename, columnname (FK) who are not indexed
CREATE TABLE INDEX_TBD AS
select distinct
user_cons_columns.TABLE_NAME,
user_cons_columns.COLUMN_NAME
from
user_cons_columns,
user_constraints,
INDEX_TXT_TBD,
where
user_constraints.CONSTRAINT_NAME=user_cons_columns.CONSTRAINT_NAME
and CONSTRAINT_TYPE='R'
AND INSTR(TXT,'"' || user_cons_columns.TABLE_NAME || '" ("' || user_cons_columns.COLUMN_NAME || '")') = 0 -
I find a missing Index when I do Database check
This is the error message:
"BR970W Database administration alert - level: ERROR, type: MISSING_INDEXES, object: (table) SAPR3.ZGMM0015"
I executed Trx. DB02 - Missing Indexes - there I find
--> Index missing under database
--> primary index - 1
--> Z..... --> I selected this and clicked on "Create in DB".
Then it pops up a dialog box asking options like Online, Background .... (can I create this Index online)
from here what I needs to do.
Gurus can some one guide me.
Thanks in advanceLooks like index is missing for the table.. When you get options like online, background, you may use online. It does not hamper the system.
-
Missing Index there Unknown indexes in ABAP Dictionary in DB02
Dear All,
I am getting error in T-code DB02 >Missing Index there Unknown indexes in ABAP Dictionary.
Please find the following details.
Unknown indexes in ABAP Dictionary
DB indexes 11
MARA_MEINS
MARA_ZER
MCHA_VFDAT
VBRP_ARKTX
VBRP_CHARG
VBRP_FKIMG
VBRP_KZWI1
VBRP_MATKL
VBRP_MATNR
VBRP_SPART
VBRP_WERKS
Please suggest how to correct them and can caution we have to take before creating the
Index.
The process creating the index form se11 table and there index>database utility and than create .The same process can be use .
Regards,Hi,
Please use the below procdure:
- Goto transaction SE11
- Enter table name and press view
- Click button "Indexes..."
Please alse check with the below links for more information.
Index:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb20446011d189700000e8322d00/content.htm
Creating Secondary Index
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb47446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/1c/252640632cec01e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/c7/55833c4f3e092de10000000a114027/frameset.htm
Check with this also......[click here|Steps for creating a database index;.
With Regards,
Krishna. -
Bridge CS5 - Adding metadata to RAW files is hit and miss
Can someone help me??? Bridge CS5 will only add the metadata I enter to the files it feels like doing. It is hit and miss. Some files will add it, and other files will get the message "There was an error writing metadata to 100824_Banks_06.NEF". It will go through my whole folder of RAW files, then other times it will allow one or two of the files to get the information. I am going crazy! Is this a preference setting issue, or what?
Tai Lao wrote:
Bridge is the weakest of all Adobe applications I use. It suffers from the same issues since its first release, when we were told to forgive the teething problems of any version 1 application. Now it's in version 4.x.
I actually spent most of the last two days wrestling with Bridge, and getty pretty annoyed with it. The "Error writing metadata" bug caused me no end of problems in trying to reorganise my keywording of 20,000 photos, and turning the air blue in the process.
I agree that Bridge seems to be the poor relation in the Creative Suite. I call it the Less Glamourous Sister. It needs to be 64-bit to host 64-bit Camera Raw, and it needs to manage resources faster and more efficiently.
I've spent a fair amount of time watching Bridge's activity with a resources monitor utility, and it's a very busy lady. It seems to poll several drives every second or two, accessing the registry, disk-based settings and library files regularly too, even when it appears to be doing nothing. And, even though I had indexed and cached my whole 20,000 photo collection, Bridge insists on recreating some thumbnails and previews at random intervals.*
I decided that the anti-virus software suggestion was a red herring in my case (I now realise this is the Mac forum anyway). Photos which gave an error became subsequently locked for several minutes, and I had to edit the sidecar files by hand. In the end, I worked out that, even though there is no on-screen indication of activity, Bridge is quietly working its way through every item in the Content pane, and it is this action which seems to coincide with the Metadata Error. Wait for it to end, and chances are much reduced, but not fully removed.
Oh, and Adobe's customer treatment might be debatable, but that helpful customer you quoted was a regular abuser of other forum users, so I like to see a silver lining from that post.
* Prefer Embedded thumbnails was also selected.
Message was edited by: Yammer P -
Missing Indexes to be Repaired
BW Gurus Please Advise on the Steps to repair missing Indexes via tc DB02
Hi; I went to 1.tc db02> Diagnostics> Missing Tables and Indexes.
The errors is this :
" /BI0/HACN_EANUPC-PAR
/BI0/HBPARTNER-PAR
/BI0/HCOUNTRY-PAR
/BI0/HCRM_PROD-PAR
/BI0/HCUSTOMER-PAR
/BI0/HDBDUNS_NUM-PAR
/BI0/HIOBJNM-PAR
/BI0/HMATL_GROUP-PAR
/BI0/HPROD_HIER-PAR
/BI0/HRF_FRECHAR-PAR
/BI0/HRT_COLOR-PAR
/BI0/HRT_SIZE-PAR
/BI0/HSEM_CGCOMP-PAR
/BI0/HSEM_CGPRCT-PAR
/BI0/HVENDOR-PAR
/BI0/KACCOUNT-001
/BI0/KACN_EANUPC-001
/BI0/KCOSTELMNT-001
/BI0/KDBDUNS_NUM-001
/BI0/KFUNCT_LOC-001
/BI0/KGL_ACCOUNT-001
/BI0/KSEM_CGCOMP-001
/BI0/KSEM_CGPRCT-001
/BI0/KVERSION-001
/BI0/KWORKCENTER-001
/BIC/KZSTATTRK-001
/SOMO/JOSCHEDLT-1
OCSCMPLOBJ-TA1
Please advise how to correct this - -
SQL Loader direct path loads and unusable indexes
sorry about all the questions. I am researching several issues. I am reading the Utilities document. It says that in certain circumstances indexes will become unusable. I have some questions about my scenario.
1. tables partitioned by range
2. local indexes
3. all tables have 1 primary key and other indexes are non-unique
4. all sql loads will go into the most recent partition
5. users will be querying tables while sql loader is occurring
6. only one sql loader session will run per table
7. no foreign keys, triggers, or other constrants other than primary keys.
The docs are not clear. Do I have a concern about unusable indexes with direct path loads? Will indexes function while the sql loader direct path is occurring(this I can't test since I have small data files now and they load fast, but I will have larger ones in production).
My understanding is that Extertnal tables using Insert append is exactly the same as sql loader direct path load. Is this true?if you dont have anything productive to say how about you don't post at all? you have made ignorant posts like this for years.
as far as reading the docs what do you think "the docs are not clear" means? By the docs I am referring to the utilities document.
As far as version number its 10.2 and I forgot that. However, it does not appear that sql loader has really changed all that much over the last few versions.
Finally I plan on testing it out and its more than a 2 minute test. I wanted to make sure I don't miss anythng in my tests.
don't respond to any threads or posts I make from now on. -
Generated index is missing indexed items
Working with book and separate chapter for index. Index generates but is missing index entries. Is it something I'm doing or an InDesign problem?
Thanks for input. All available updates have been applied. Long telcon with India so far has produced no cure but at last they are 'escalating' problem to find a solution. It seems to only happen in the 'Symbols' heading (non-alphabetic entries) of the index. Not only are items missing but reference page numbers are missing and/or scrambled. Looks like several indexed subjects are loosing page references and/or picking up page references from following index lines. If you can read the image attached you'll see what I'm talking about if you compare the index flyout lines with what shows up in the generated index. Quite a time consuming pain. It took me almost an hour on the phone to get India to the point they wanted to see this.
-
Respected All,
We found a huge number of missing indexes(primary and secondary both) in DB02.Is there any way to rebuilt or produce all these missing indexes in a mass or in a single step?? Thanks in advance for your supportsDear,
You can create indexes as per your requirement. You can create by BRTOOLS as well as from SE14 t-code. After creating index you have to run Update statastics job.
Regards,
Charanjit
Maybe you are looking for
-
please help it came upto £50 worth
-
HT5029 Subscription Calendars in iCal with iCloud
I tried this (changing location of subscription calendar) with Lion, and it didn't offer me the choice to select iCloud as a location...only On My Mac
-
Purchase Requisitions in IW37 Output
The 'Purchase Requisition' column in the output of IW37 is always blank though an examination of individual work orders listed in the output reveals requisition numbers on many of the operations. What is the purpose of the 'Purchase Requisition' col
-
Can I install just one program from CS4 onto my laptop?
I want the whole cs4 suite on my editing desktop, but i only need Photoshop on my laptop. is this possible thanks- rob
-
Workflow starting when event is trigered, but not in transaction
Hello, I have defined a workflow for FI, based on FIPP and a derived ZSF1FIPP subclass. I have a strange situation with this WF. It listens for the event CREATE from FIPP. If I create an invoice with fbv1, de WF doesn't start, and in trace it sayes e