Dbacockpit error

Hi Experts,
with the help of note 1261329 - DBA Cockpit: Oracle as a remote database, I have configured dbacockpit for one of my managed system.
I have added the entry in tnsnames.ora file as per note 1261329. After that i have created a database connection. while testing this database connection, I am getting following error
-- ERROR Database connection %_ED5_CDEVECC01: SQL error 12170 ORA-12170: TNS:Connect timeout occurred.
I have checked, database, listerner is up in settelite system.
Kinldy help in resolving this issue.
Regards,
Akhilesh.

Hello Akhilesh,
The following is the error description of the ora-12170.
12170, 00000, "TNS:Connect timeout occurred"
// *Cause: The server shut down because connection establishment or
            communication with a client failed to complete within the
            allotted time interval. This may be a result of network or
            system delays; or this may indicate that a malicious client
            is trying to cause a Denial of Service attack on the server.
// *Action: If the error occurred because of a slow network or system,
            reconfigure one or all of the parameters
            SQLNET.INBOUND_CONNECT_TIMEOUT, SQLNET.SEND_TIMEOUT,
            SQLNET.RECV_TIMEOUT in sqlnet.ora to larger values.
            If a malicious client is suspected, use the address in
            sqlnet.log to identify the source and restrict access. Note
            that logged addresses may not be reliable as they can be
            forged (e.g. in TCP/IP).
Unfortunately, I am not a DBA, so I am not sure what values are defaulted when not set, so I am not sure what values would be suitable. I know a corrective action for this error can be to increase the values.
Regards,
Paul

Similar Messages

Tcode DBACOCKPIT error

Dear expert,
My system is SAP ERP on SQL Sever 2008. when I use tocde DBACOCKPIT, system show error
52 actions disabled. Reason: monitor objects missing
Database is not yet configured for monitoring
RAT provider does not exist : sap_get_princ [[READ_TLIST]]
RAT provider does not exist : sap_get_princdetail[[READ_TLIST]]
RAT provider does not exist : sap_get_perms [[READ_TLIST]]
I cannot use any function. I click button Execute SQL scrip(s) on tab SQL Script Executtion but it is still error.
Please help me solve this problem.
Best Regards,
Edited by: Minh Diep Kim on Aug 24, 2011 5:54 PM
Edited by: Minh Diep Kim on Aug 24, 2011 5:58 PM
Edited by: Minh Diep Kim on Aug 24, 2011 5:58 PM

Hi Eduado,
I am sorry for replying too late.
My system is SAP Netweaver 7.02 SPS 4
SAP_ABA ___ 702 ___     0007 ___     SAPKA70207 ___     Cross-Application Component
SAP_BASIS     ___ 702 ___     0007 ___     SAPKB70207 ___     SAP Basis Component
PI_BASIS ___     702 ___     0007 ___     SAPK-70207INPIBASIS ___     Basis Plug-In
ST-PI ___     2008_1_700     ___ 0004     SAPKITLRD4 ___     SAP Solution Tools Plug-In
SAP_BS_FND ___     702 ___     0005 ___     SAPK-70205INSAPBSFND ___     SAP Business Suite Foundation
SAP_BW ___     702 ___     0007 ___     SAPKW70207 ___     SAP Business Warehouse
SAP_AP ___     700 ___     0022 ___     SAPKNA7022 ___     SAP Application Platform
WEBCUIF ___     701 ___     0004 ___     SAPK-70104INWEBCUIF     ___ SAP Web UI Framework
I checked authorization. It's not problem.
Regards,
Edited by: Minh Diep Kim on Sep 4, 2011 7:36 AM
Edited by: Minh Diep Kim on Sep 4, 2011 7:36 AM

SAP SOLMAN 7.1 error in ATM for DBACOCKPIT

Hi Experts,
My client's SAP Solution Manager 7.1 has been displaying the error message - "Error in RDI back-end setup occured!", since last one week. I am unable to analyze this to resolution, as there is nothing I couldn't find closely relative in the standard database SAP Sybase 15.7. ASE server configuration guides or in the SCN itself for that matter, which would help me resolve this bugging error.
I have also checked in system logs but have always found different types/varieties of database errors everyday. I am attaching the error screenshots for your kind reference and consideration. Kindly note that I have worked on most databases previously in an efficient manner except for Sybase ASE, which is relatively new to me.
When I click on repair, I am getting the following error, which my SAP Basis PM/lead has told me its a generic error.
Upon clicking on yes, I am getting the unavoidable error shown below -
The error is - "Error in RDI back-end setup occured!", as i have stated above.
I have checked the ATM logs and history and they are fine. I am getting error only in the ATM queue as shown below -
I am also getting the same database errors in event viewer as to those in the system logs for SAP SOLMAN 7.1 server.
I would appreciate it very much if one of the Sybase experts would help me out here. Speaking of technical configuration for any database in conceptual terms, I perceive this error to be a space issue as mentioned in the ATM queue. I believe I have provided sufficient details. The OS here is the Windows server 2008 R2 version.
Kindly mention if you need more details for a speedy and possible error analysis and resolution
This is an emergency task for me as I need to resolve it on ASAP basis. Rest assured, points for all right answers will be awarded generously.
Thanks and regards,
M. Nizam

Hi Nizam,
Please share what is the database patch level for Sybase ASE 15.7
Additionall please review below SAP notes
1619967
SYB: DBA Cockpit Correction Collection SAP Basis 7.31
1558958
SYB: DBA Cockpit Correction Collection SAP Basis 7.02 / 7.30
1920025 DBACOCKPIT - Error 'Repair ATM' when started from different systems
Hope this helps.
Regards,
Deepak Kori

Function DB6_PLAN_STOP_BATCH failed

Dear All,
Suddenly in db13 Category-DB collectors in there 0 Clean_Plan job are Scheduled , we I am going to delected it is given below error .Please suggest
@5C\QRed LED; stop; errors@     SOL     Function DB6_PLAN_STOP_BATCH failed with return code = DB error
@5C\QRed LED; stop; errors@     SOL     An error occurred when processing system
@5C\QRed LED; stop; errors@     SOL     Function DB6_PLAN_DELETE_BATCH failed with return code = DB error
Regards,
Kumar

Hi,
Check SAP Note 1088211 - DBACOCKPIT: Error when editing planned actions.
Thanks
Sunny

After system copy facing error in DBACOCKPIT

Dear All
We are installing QAS server through system copy from DEV server.But after installtion when we run transction it's give us errors.
Wed Aug 17 15:44:29 2011
M ThEMsgArrived: sysmsg_for_rfc = 0
B Connect to +++DB6ADM as DB2DEV with DB6_DB_NAME=QAS;DB6_DB_SCHEMA=SAPQAS
C *** ERROR in DB6Connect[dbdb6.c, 1792] CON = 1 (BEGIN)
C &+     DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL1060N User "DB2DEV " does not have the CONNECT privilege. SQ
C &+     LSTATE=08004
C &+
C &+
C &+     ABAP location info 'CL_SQL_CONNECTION=============CP', 334
C &+     SAP user 'SM_IBM', transaction code 'DBACOCKPIT'
C &+
C *** ERROR in DB6Connect[dbdb6.c, 1792] (END)
C *** ERROR => DbSlConnect to 'QAS' as 'DB2DEV' failed
[dbdb6.c      1797]
C {root-id=0050563700011ED0B297BB2AFD244193}_{conn-id=00000000000000000000000000000000}_0
B ***LOG BY2=> sql error -1060      performing CON        [dbds         902]
B ***LOG BY0=> SQL1060N User "DB2DEV " does not have the CONNECT privilege. SQLSTATE=08004 [dbds         902]
B ***LOG BY1=> sql error -1060      [dbacds       1496]
B
B Wed Aug 17 15:44:30 2011
B Connect to +++DB6ADM as DB2DEV with DB6_DB_NAME=QAS;DB6_DB_SCHEMA=SAPQAS
C *** ERROR in DB6Connect[dbdb6.c, 1792] CON = 1 (BEGIN)
C &+     DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL1060N User "DB2DEV " does not have the CONNECT privilege. SQ
C &+     LSTATE=08004
C &+
C &+
C &+     ABAP location info 'CL_SQL_CONNECTION=============CP', 334
C &+     SAP user 'SM_IBM', transaction code 'DBACOCKPIT'
C &+
C *** ERROR in DB6Connect[dbdb6.c, 1792] (END)
C *** ERROR => DbSlConnect to 'QAS' as 'DB2DEV' failed
[dbdb6.c      1797]
C {root-id=0050563700011ED0B297BB2AFD244193}_{conn-id=00000000000000000000000000000000}_0
B ***LOG BY2=> sql error -1060      performing CON        [dbds         902]
B ***LOG BY0=> SQL1060N User "DB2DEV " does not have the CONNECT privilege. SQLSTATE=08004 [dbds         902]
B ***LOG BY1=> sql error -1060      [dbacds       1496]
B Connect to +++DB6ADM as DB2DEV with DB6_DB_NAME=QAS;DB6_DB_SCHEMA=SAPQAS
C *** ERROR in DB6Connect[dbdb6.c, 1792] CON = 1 (BEGIN)
C &+     DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL1060N User "DB2DEV " does not have the CONNECT privilege. SQ
C &+     LSTATE=08004
C &+
C &+
C &+     ABAP location info 'CL_SQL_CONNECTION=============CP', 334
C &+     SAP user 'SM_IBM', transaction code 'DBACOCKPIT'
C &+
C *** ERROR in DB6Connect[dbdb6.c, 1792] (END)
C *** ERROR => DbSlConnect to 'QAS' as 'DB2DEV' failed
[dbdb6.c      1797]
C {root-id=0050563700011ED0B297BB2AFD244193}_{conn-id=00000000000000000000000000000000}_0
B ***LOG BY2=> sql error -1060      performing CON        [dbds         902]
B ***LOG BY0=> SQL1060N User "DB2DEV " does not have the CONNECT privilege. SQLSTATE=08004 [dbds         902]
B ***LOG BY1=> sql error -1060      [dbacds       1496]
B Connect to +++DB6ADM as DB2DEV with DB6_DB_NAME=QAS;DB6_DB_SCHEMA=SAPQAS
C *** ERROR in DB6Connect[dbdb6.c, 1792] CON = 1 (BEGIN)
C &+     DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL1060N User "DB2DEV " does not have the CONNECT privilege. SQ
C &+     LSTATE=08004
C &+
C &+
C &+     ABAP location info 'CL_SQL_CONNECTION=============CP', 334
C &+     SAP user 'SM_IBM', transaction code 'DBACOCKPIT'
C &+
C *** ERROR in DB6Connect[dbdb6.c, 1792] (END)
C *** ERROR => DbSlConnect to 'QAS' as 'DB2DEV' failed
[dbdb6.c      1797]
C {root-id=0050563700011ED0B297BB2AFD244193}_{conn-id=00000000000000000000000000000000}_0
B ***LOG BY2=> sql error -1060      performing CON        [dbds         902]
B ***LOG BY0=> SQL1060N User "DB2DEV " does not have the CONNECT privilege. SQLSTATE=08004 [dbds         902]
B ***LOG BY1=> sql error -1060      [dbacds       1496]
B
B Wed Aug 17 16:12:36 2011
B Connect to +++DB6ADM as DB2DEV with DB6_DB_NAME=QAS;DB6_DB_SCHEMA=SAPQAS
C *** ERROR in DB6Connect[dbdb6.c, 1792] CON = 1 (BEGIN)
C &+     DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL1060N User "DB2DEV " does not have the CONNECT privilege. SQ
C &+     LSTATE=08004
C &+
I can't understand we are installed QAS server why it's show User "DB2DEV   for connection
I am also oracle DBA but new in DB2
Please guide me
Regards

Hi,
It might be helpful for you to check the SAP note 1072206 and change administration connection accordingly.
Regards,
Masako

SSO error in DBACOCKPIT (and others)

Hi
After migrating to Sybase i have a problem with SSO to Webdynpro applications. First of all in DBACOCKPIT, but i can see it´s a general problem not specific to the DBACOCKPIT...
If i call program SAPHTML_SSO_DEMO i get error 00(146) saying:
Error in configuration of SAP logon tickets
Message no. 00146
Diagnosis
The system was not configured for SAP logon tickets:
At least one of the two parameters login/create_sso2_ticket and login/accept_sso2_ticket currently has the value 0.
I have of course maintained parametrrs with RZ10 and restarted (several times). But still i get this error. Output of TCODE SSO2 shows me that parameters are allright:
Any good ideas to solve?

Hi Jakob,
Please find the same issue in below thread
No SSO funktion, but all parameters are set correct
We must delete the standard entry in list if transaction STRUST -> environment -> maintain SSF parameters
BR
AKJ

DBACOCKPIT job error when running backup job to LAN network folder

Hello all
I have set up a network location through MSSQL Server Management Studio from
Server Objects -> Backup devices
and using SQL Server Managemnt Studio i can backup Full or Log to that network locaion.
When in SAP using DBACOCKPIT i can see the backup device which i defined in the SQL but when i run a job to backup FULL or LOG then i get the following error :
SQL Job information   ******************************
Jobname:    SAP CCMS Full DB Backup of master,msdb,GDW [20110725095438-1-095438]
Type:       TSQL
DB-Name:    GDW
For Run:    20110725 09:54:38
Job history information *****************************
Stepname:   CCMS-step 1
Command:    declare @exeStmt nvarchar(2000) exec gdw.sap_backup_databases @dbList=
            "master,msdb,GDW",@r3Db="GDW",@bDev="@FisticFULL",@expDays= 27,@jobNam
            e= "SAP CCMS Full DB Backup of master,msdb,GDW [20110725095438-1-09543
            8]",@bkupChecksum="N",@bkupCompress="N",@bkupType="F",@nativeBkup="N",
            @exeDate = "20110725095438",@bkupSim = "N",@format = 0,@init = 0,@bkup
            Db = "master",@unload = 0,@exeStmt = @exeStmt OUTPUT
Status:     (failure)
Message:    2528
Severity:                                                                                15
Duration:   0 hours(s) 0 min(s) 0 sec(s)
Last msg:   Executed as user: NT AUTHORITY\SYSTEM. Must declare the scalar variabl
            e "@FisticFULL". [SQLSTATE 42000] (Error 137) Incorrect syntax near t
            he keyword 'with'. If this statement is a common table expression, an
            xmlnamespaces clause or a change tracking context clause, the previous
             statement must be terminated with a semicolon. [SQLSTATE 42000] (Erro
            r 319) DBCC execution completed. If DBCC printed error messages, cont
            act your system administrator. [SQLSTATE 01000] (Error 2528). The ste
            p failed.
                    <----
End of Job Step History -
>
Job history information *****************************
any ideas?
thx in advance

Hello Marcus
I went to the link which you mentioned and there is nothing mentioned about hot to give rights to the user NTAUTHORITY\SYSTEM in order to do network backup.
I have done the following:
at server A which i my backup server i have a folder which i have it shared with full permissions for everyone.
At the SECURITY there is also full rights for everyone and for local admins.
From Server B i went to services and i stoped the SQL SERVER service and i set it up to log on with a user which has Administrator rights in the DOMAIN.
From server B i logged on with administrator and i defined at the SQL Server Management Studio at Server Objects -> Backup devices a new backup device with the network path.
The thing is that i have to go with windows explorer to the network location of where i want to do backup in order to put my domain username and password and after i can run the backup by the SQL Server Management Studio.
Do you know where do i need to give authority to NTAUTHORITY\SYSTEM in order for my backup to work from the SAP - DBACOCKPIT?
thx in advance.

DBACockpit - External MSSQL Error

Hi All,
I'm trying to establish a connection to an external MSSQL server in Solution Manager DBACockpit following sap note 1316740.
However when I run the connection test I get the following error :-
-- ERROR The version of the monitor schema is impermissible (should be/is: 0610.0800.0007/ )
What is this and how do I fix it?
Thanks
Craig

Doesn't matter I read sap note 1774329, which lead me to the fact the version of the Microsoft SNAC was out of date. Updated this and redid the whole configuration and now fixed.
Cheers
Craig

Error while executing a job via dbacockpit

Hi,
I encountered the below errores while trying to execute a dba job (cleanup log, backup redo log...)
What could be the cause ? Could it be the SAPPROD_00 windows service that's not working ?
Please advise. TIA !
SAP-Basis System: Operating system call        connect failed (error no. 10061)
SAP-Basis System: Communication error, CPIC return code 017, SAP return code 236
SAP-Basis System: > CPI-C function: CMINIT(SAP)
Background processing: Error1005 when executing external command brconnect on SAPXPG_DBDEST_BELLSERVER (in=R,out=M,err=M,trc=0,trm=C. strtstat=,xpgid=0,convid=. msg:Error when openi                                               )

Hi,
If CI & DB are on different host this error normally occures.SAP return codes 236 means no connection to gateway, can you check it?
Also check whether TCP/IP RFC connection SAPXPG_DBDEST_* is working fine or not.If it is not working fine then please check whether you have mentioned below details
Program              sapxpg
Target Host          DB Host name
Gateway Host    DB host/gateway host
Gateway service sapgw##
Also refer SAP Note 108777 - CCMS: Message 'SAPXPG failed for BRTOOLS' & Note 446172 - SXPG_COMMAND_EXECUTE (program_start_error) in DB13
Hope this helps.
Thanks,
Sushil

SQL Error 0 during DBACockpit setup in Managed System Configuration

Hi All,
I'm getting SQL Error 0 during DBA Cockpit setup in Managed system configuration. I'm trying to connect MsSQL 2005 from Linux system(Solution Manager 7.1 SP10). I have installed necessary ODBC and microsoft drivers. Any suggestions will be appreciated.
Regards,
Pragadees

If I've understood you correctly, you are trying to setup a remote database connection from an SAP Solution Manager system running on Linux with a database which is NOT MSSQL to a database which is MSSQL running on Windows.
In that case have you checked these SAP notes ?
1265134 - DBA Cockpit: Connecting a remote database
1388700 - SolMan 7.0 EHP1 Database Warehouse for MSSQL
Regards
RB

Database error 12170 in DBACOCKPIT in SAP MSCS enviornment

Dear All,
We have install the Production SAP netweaver 7 EHP1 Java standalone engine for portal with MSCS.
Now we are trying to configure database monitoring in sap solution manager using dba cockpit
the connection is configure successfully but when i am trying to check performance overview for production system i am getting the error.
ORA-12170: TNS:Connect timeout occurred
i have configure the dev and QUA system also and that i am able to access the details from solman without any issue.
Please note : DEV and QUA is install on same system where SOLMAN is install.
Sincerely
Paresh

Hi,
This error come for many reasons, like network trouble, firewall issue, listener down, database down,bad sqlnet.ora parm, , etc.
Please check the below link. Hope this will help you to solve..
http://www.dba-oracle.com/t_ora_12170_tns_connect_timeout.htm
Also check this link which maybe very helpful..
Transaction CODE
Also try to run the t.code SLDAPICUST and maintain the proper connection settings like user name , host name and port number.
Regards
Bhuban

ERROR running PLANNING CALENDAR JOB on DBACOCKPIT

Hi Master,
I have some problems with my dbacockpit, I cannot run any job planning calendar on dbacockpit..anyone can help me to resolved the problem?
Thanx,
Luki

Hi Luku
did you performed "self-Monitoring" and applied the master note with SNOTE?
Sem

Error Messages when Checking Database via dbacockpit

Hi,
I got the below messages when I tried to exe a "Check Database" job. What could be wrong ? Please advise. TIA !
SXPG_STEP_XPG_START: RFC_TCPIP_CONNECTION_OPEN returned rc_cannot_get_rfc_dests
Message no. BT351
SXPG_STEP_COMMAND_START: SXPG_STEP_XPG_START returned: 901
Message no. BT351
SXPG_COMMAND_EXECUTE failed for BRARCHIVE - Reason: x_error
Message no. Q2233
Diagnosis
This message includes variables. No additional information can be specified.
Job cancelled after system exception ERROR_MESSAGE
Message no. 00564
DL

Hai,
Are you trying to execute the job in a remote server, if yes check the RFC connection which it uses to connect.
Provide the SAP Gateway details for that RFC connection and then try.
Regards,
Yoganand.V

Error while Scheduling Full DB back up?

Hi gurus,
I got error while schedule full DB back up. I am follow all the steps.but i got this error.
1. go to DB13
2. select Day
3.select full DB backup
4.select time
5.select sid, msdb,inttape,verify backup
5.add.
our DB is MS-SQL server Data Base
client :222   user: admin
error: User not connected
2008-04-10 14:28:06.89 Server      Microsoft SQL Server 2005 - 9.00.2047.00 (Intel X86)
     Apr 14 2006 01:12:25
     Copyright (c) 1988-2005 Microsoft Corporation
     Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
2008-04-10 14:28:06.89 Server      (c) 2005 Microsoft Corporation.
2008-04-10 14:28:06.89 Server      All rights reserved.
2008-04-10 14:28:06.89 Server      Server process ID is 308.
2008-04-10 14:28:06.89 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'.
2008-04-10 14:28:06.89 Server      This instance of SQL Server last reported using a process ID of 308 at 4/10/2008 2:24:10 PM (local) 4/10/2008 8:54:10 AM (UTC). This is an informational message only; no user action is required.
2008-04-10 14:28:06.89 Server      Registry startup parameters:
2008-04-10 14:28:06.89 Server            -d C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\master.mdf
2008-04-10 14:28:06.89 Server            -e C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG
2008-04-10 14:28:06.89 Server            -l C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\mastlog.ldf
2008-04-10 14:28:06.90 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2008-04-10 14:28:06.90 Server      Detected 8 CPUs. This is an informational message; no user action is required.
2008-04-10 14:28:07.06 Server      Set AWE Enabled to 1 in the configuration parameters to allow use of more memory.
2008-04-10 14:28:07.20 Server      Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2008-04-10 14:28:07.21 Server      Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2008-04-10 14:28:18.89 Server      Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2008-04-10 14:28:18.89 Server      Database mirroring has been enabled on this instance of SQL Server.
2008-04-10 14:28:18.89 spid4s      Starting up database 'master'.
2008-04-10 14:28:18.96 spid4s      Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2008-04-10 14:28:19.00 spid4s      SQL Trace ID 1 was started by login "sa".
2008-04-10 14:28:19.01 spid4s      Starting up database 'mssqlsystemresource'.
2008-04-10 14:28:19.04 spid4s      The resource database build version is 9.00.2047. This is an informational message only. No user action is required.
2008-04-10 14:28:19.18 spid4s      Server name is 'ERPPRD'. This is an informational message only. No user action is required.
2008-04-10 14:28:19.18 spid9s      Starting up database 'model'.
2008-04-10 14:28:19.29 spid9s      Clearing tempdb database.
2008-04-10 14:28:19.37 spid9s      Starting up database 'tempdb'.
2008-04-10 14:28:19.39 spid9s      Analysis of database 'tempdb' (2) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
2008-04-10 14:28:19.40 spid12s     The Service Broker protocol transport is disabled or not configured.
2008-04-10 14:28:19.40 spid12s     The Database Mirroring protocol transport is disabled or not configured.
2008-04-10 14:28:19.40 spid12s     Service Broker manager has started.
2008-04-10 14:28:19.42 Server      A self-generated certificate was successfully loaded for encryption.
2008-04-10 14:28:19.43 Server      Server is listening on [ 'any' <ipv4> 1433].
2008-04-10 14:28:19.43 Server      Server local connection provider is ready to accept connection on [
.\pipe\SQLLocal\MSSQLSERVER ].
2008-04-10 14:28:19.43 Server      Server named pipe provider is ready to accept connection on [
.\pipe\sql\query ].
2008-04-10 14:28:19.43 Server      Server is listening on [ 127.0.0.1 <ipv4> 1434].
2008-04-10 14:28:19.43 Server      Dedicated admin connection support was established for listening locally on port 1434.
2008-04-10 14:28:19.43 Server      The SQL Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b. Failure to register an SPN may cause integrated authentication to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies.
2008-04-10 14:28:19.43 Server      SQL Server is now ready for client connections. This is an informational message; no user action is required.
2008-04-10 14:28:19.48 spid21s     Starting up database 'msdb'.
2008-04-10 14:28:19.48 spid23s     Starting up database 'SRM'.
2008-04-10 14:28:19.48 spid22s     Starting up database 'PRD'.
2008-04-10 14:28:20.29 spid23s     Analysis of database 'SRM' (6) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
2008-04-10 14:28:23.40 spid22s     Analysis of database 'PRD' (5) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
2008-04-10 14:28:23.95 spid4s      Recovery of any in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC) has completed. This is an informational message only. No user action is required.
2008-04-10 14:28:23.95 spid4s      Recovery is complete. This is an informational message only. No user action is required.
2008-04-10 14:28:26.37 spid51      Using 'xpsqlbot.dll' version '2005.90.2047' to execute extended stored procedure 'xp_qv'. This is an informational message only; no user action is required.
2008-04-10 14:28:26.53 spid51      Using 'xpstar90.dll' version '2005.90.2047' to execute extended stored procedure 'xp_instance_regread'. This is an informational message only; no user action is required.
2008-04-10 14:28:26.57 spid51      Using 'xplog70.dll' version '2005.90.2047' to execute extended stored procedure 'xp_msver'. This is an informational message only; no user action is required.
2008-04-11 00:00:56.75 spid17s     This instance of SQL Server has been using a process ID of 308 since 4/10/2008 2:28:23 PM (local) 4/10/2008 8:58:23 AM (UTC). This is an informational message only; no user action is required.
2008-04-11 16:44:23.89 spid112     DBCC CHECKDB (PRD) started at Apr 11 2008 4:44PM with Logfile: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\CCMS_CHECK_DB_HIST_2008.txt
2008-04-11 16:52:47.53 spid107     DBCC CHECKDB (PRD) started at Apr 11 2008 4:52PM with Logfile: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\CCMS_CHECK_DB_HIST_2008.txt
2008-04-11 17:00:01.48 spid115     DBCC TRACEON 3605, server process ID (SPID) 115. This is an informational message only; no user action is required.
2008-04-11 17:00:10.45 spid115     Error: 18204, Severity: 16, State: 1.
2008-04-11 17:00:10.45 spid115     BackupTapeFile::OpenMedia: Backup device '
.\tape1' failed to open. Operating system error 2(The system cannot find the file specified.).
2008-04-11 17:00:10.67 Backup      Unnamed tape was dismounted from drive 'R3DUMP1(
.\tape1)'. This is an informational message. No user action is required.
2008-04-11 17:00:10.65 Backup      Error: 3041, Severity: 16, State: 1.
2008-04-11 17:00:10.65 Backup      BACKUP failed to complete the command BACKUP DATABASE PRD. Check the backup application log for detailed messages.
2008-04-11 17:00:11.18 Backup      Tape 'Media created 3/29/2007 at 2:43 PM' was dismounted from drive 'R3DUMP0(
.\tape0)'. This is an informational message. No user action is required.
2008-04-11 17:00:15.54 spid101     DBCC TRACEON 3605, server process ID (SPID) 101. This is an informational message only; no user action is required.
2008-04-11 17:00:15.60 spid101     Error: 18204, Severity: 16, State: 1.
2008-04-11 17:00:15.60 spid101     BackupTapeFile::OpenMedia: Backup device '
.\tape1' failed to open. Operating system error 2(The system cannot find the file specified.).
2008-04-11 17:00:15.60 Backup      Unnamed tape was dismounted from drive 'R3DUMP1(
.\tape1)'. This is an informational message. No user action is required.
2008-04-11 17:00:15.60 Backup      Error: 3041, Severity: 16, State: 1.
2008-04-11 17:00:15.60 Backup      BACKUP failed to complete the command BACKUP DATABASE PRD. Check the backup application log for detailed messages.
2008-04-11 17:00:15.60 Backup      Unnamed tape was dismounted from drive 'R3DUMP0(
.\tape0)'. This is an informational message. No user action is required.
2008-04-11 17:02:57.57 spid114     DBCC CHECKDB (PRD) started at Apr 11 2008 5:02PM with Logfile: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\CCMS_CHECK_DB_HIST_2008.txt
2008-04-11 18:30:37.75 spid112     DBCC CHECKDB (PRD) WITH no_infomsgs executed by NT AUTHORITY\SYSTEM found 0 errors and repaired 0 errors. Elapsed time: 1 hours 46 minutes 14 seconds.
2008-04-11 18:54:52.10 spid114     DBCC CHECKDB (PRD) WITH no_infomsgs executed by NT AUTHORITY\SYSTEM found 0 errors and repaired 0 errors. Elapsed time: 1 hours 51 minutes 55 seconds.
2008-04-11 18:55:25.00 spid107     DBCC CHECKDB (PRD) WITH no_infomsgs executed by NT AUTHORITY\SYSTEM found 0 errors and repaired 0 errors. Elapsed time: 2 hours 2 minutes 38 seconds.
2008-04-12 00:00:30.75 spid17s     This instance of SQL Server has been using a process ID of 308 since 4/10/2008 2:28:23 PM (local) 4/10/2008 8:58:23 AM (UTC). This is an informational message only; no user action is required.
This is error
anybody help me.
Regards,
balaram
Edited by: balaram reddy on Apr 14, 2008 8:44 PM

If your ECC6 is on SP12 and above, use t-code : DBACOCKPIT or DB13OLD
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0dc0752-2502-2a10-2a93-94823467ca79

DBACockpit Configuration - Remote Database backup of Java Stack.

Hi All,
I am configuring remote database backup of my SAP Java stack system.
I have successfully connected the system in dbacockpit. I have gateway installed also on the remote host system. but Database scheduling on DB13 failed.
On the OS of CEN system, I can connect to the host system of the remote using the OPS$ logon and i.e
sqlplus /@SID as sysdba - (It connected, to confirm i querried the v$instance I was also able to shutdown the remote system)
E:\>sqlplus /@SID as sysdba
SQL*Plus: Release 10.2.0.4.0 - Production on Wed May 18 15:37:46 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
But when I ran the brtools to perform the backup I got this error.
"BR0301W SQL error -12560 at location BrDbConnect-2, SQL statement:

Hi Niyi,
This is a TNS error. The system is not able to connect TNS by using br*tools.
Firstly, check your environment variables. They should be as same as java system environmnt variables.
Secondly, check the link below;
[BR0301W SQL error -1017;
You need to create a synonym and SAPUSER table for the gateway installation <sid>adm user on Java database. By doing so, br*tools will be able to connect to the java database.
Best regards,
Orkun Gedik

Dbacockpit error

Similar Messages

Maybe you are looking for