Dbif_repo_sql_error after executing "sgen"

Hi
Tcode "sgen" was canceled after execution and now I have the error: dbif_repo_sql_error and cannot access some transactions.
Some people advised to extend the tablespaces shown in st22. I don't know how to do that and if this is really the problem.
Thanks
Go:khan

Hi,
Extending the table space is usually a BASIS task & it doesn't hurt to extend too..
Regards,
Suresh Datti

Similar Messages

Button on toolbar after executing the report i.e. after result display

Hi, after executing the report result is being displayed.Now at this stage I want a button on the application toolbar clicking on which will allow a perform to get triggered.
I tried in following manner:
SELECTION-SCREEN: FUNCTION KEY 1.
*INITIALIZATION.
TABLES: SSCRFIELDS.
*MOVE icon_mail TO sscrfields-functxt_01.
*form SEND_EMAIL .
IF sy-ucomm = 'FC01'.
     PERFORM SEND_MAIL_ASSET_STATUS.
ENDIF.
But it's not ok.The above way is not working.
Please note: I want button on toolbar only after executing the report i.e. after result display.
How can I do this?
Kindly guide.
Best regards.

hi
if you are using alv than just pass 3 values to function call
     I_CALLBACK_PROGRAM                = SY-REPID   " program name
     I_CALLBACK_PF_STATUS_SET          = 'STATUS' "PF-STATUS
     I_CALLBACK_USER_COMMAND           = 'UCOMMAND' " subroutine name
and check the value of UCOMM in subroutine

Issue in Selection Screen of ABAP report after executing it using TCode

Hi,
I have one Z program having a selection screen for it. One selection variable is non editable for the users (has default value) whereas user can enter the value in other selection variable.
To make the first variable non editable, I have used the following code.
INITIALIZATION.
LOOP AT SCREEN.
    IF screen-name = 'P_USER'.
      screen-input = 0.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
Now when I execute this program from SE38, it works fine. But when I execute it using a Tcode (assigned in SE93), the first variable also become editable for users.
How can I keep the first variable non editable even after executing the program using a Tcode?
Regards,
Yogesh

Hi,
It seems you create a Transaction type: Dialog transaction.
Delete current transaction and create one with Transaction type: Report transaction (radio button in row 2nd)
regards,

How will be outbound data structure in sap xi after executing the stored pr

Hi All
can any one please tell me how will be outbound data structure in sap xi after executing the stored procedure by sender JDBC adapter?
Thanks in advance
regards
Rams

Hi..
My stored procedure is select and it will be OUTBOUND in PI.
is it will be same as following
<resultset>
<row>
<column-name1>column-value</ column-name1>
<column-name2></column-name2>
<column-name3>column-value</ column-name3>
<column-name4></column-name4>
</row>
<row>
<column-name1>column-value</ column-name1>
<column-name2></ column-name2>
</row>
</resultset>
Regards
Rams
Edited by: Rameshkumar Varanganti on Oct 15, 2008 12:04 PM

Database is Hanging after executing the Procedure ...

Dear All i am using 10G.
I Have a procedure . After executing the Procedure when i try to call that procedure it is hanging ...
it is creating Locks .. As our DBA told..And told to check the code ...
Can any one tell me how can i put mu codes with formatting ? When i copy paste my code it is showing properly but after POST MESSAGE it is showing like i have written history ...--*
I am Executing the procedure like this ...
EXEC simulator_validation ('0|BP-V1|20101004|01|1|2430962.89|27|2430962.89|MUR|20100928120106','04-SEP-2010',27,2430962.89,'MUR','000111111111');
And my code is :-
{Create Or Replace Procedure simulator_validation (lstring varchar2,ldate date,lno_item number,ltotal number,lcur varchar2,lac_no Varchar2)
IS
l_swift_code_acno number;
l_ACno_Valid number;
l_swift_code_others Number;
lpcode varchar2(5);
lCcode Varchar2(4);
lval number;
lacno varchar2(16);
v_file varchar2(20);
v_path varchar2(50);
LToken   VARCHAR2(100) ;
i        PLS_INTEGER := 2 ;
lfirst_char number;
lvalue Varchar2(100) ;
lcol number:= 1;
Begin
lfirst_char := Substr(lstring,0,1);
Dbms_output.put_line(lfirst_char);
      IF lfirst_char = '0' Then ------------------- For the 1st Line - Should be start from 0
            Loop
              LToken := mcb_simulator_pkg.Split( lstring, i , '|') ;
              lvalue := LToken;
                  IF lcol=1 then
                         If lvalue='BP-V1' THEN
                               Dbms_output.put_line('1');
                         Else
                             Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0003','Invalid file type and version number');
                            Dbms_output.put_line('2');
                        End if;
                  Elsif lcol=2 then
                          If lvalue=To_Char(ldate,'YYYYMMDD') THEN
                             Dbms_output.put_line('3');
                        Else
                             Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0004','Due date differs from the value inputted in the loading screen');
                             Dbms_output.put_line('4');
                        End if;
                  Elsif lcol=3 then
                               Begin
                                     Select PAYMENT_PURPOSE_CODE into lpcode
                                     From MU_PURPOSE_CODE
                                     Where PAYMENT_PURPOSE_CODE = lvalue;
                                 IF lpcode = lvalue Then
                                       Dbms_output.put_line('5');
                                 Else
                                      Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0006','Invalid payment purpose code');
                                      Dbms_output.put_line('6');
                                 End If;
                            Exception
                                When No_data_found Then
                                Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0006','Invalid payment purpose code');
                            End;
                  Elsif lcol=4 then
                                If lvalue='1' THEN
                                     Dbms_output.put_line('7');
                                Else
                                   Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0008','Total number of debit records in header does not tally with number                   debit records in the file.');
                                  Dbms_output.put_line('8');
                               End if;
                  Elsif lcol=5 then
                                If lvalue=ltotal THEN
                                      Dbms_output.put_line('9');
                                Else
                                    Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0010','Total debit transaction amount in header does not tally with the sum of debit transaction amount in the file');
                                   Dbms_output.put_line('10');
                              End if;
                 Elsif lcol=6 then
                                If lvalue=lno_item THEN
                                     Dbms_output.put_line('11');
                                Else
                                    Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0025','Number of credit records does not tally with credit records in the file.');
                                End if;
                 Elsif lcol=7 then
                                If lvalue=ltotal THEN
                                     Dbms_output.put_line('12');
                                Else
                                     Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0026','Sum of credit records does not tally with total transaction amount as inputted in the loading screen');
                                End if;
                Elsif lcol=8 then
                                If lvalue=lcur THEN
                                      Begin
                                                Select Cur_CODE into lCcode
                                                  From Mu_currency_Code
                                                Where Cur_CODE = lvalue;
                                                Dbms_output.put_line('13');
                                      Exception
                                          When No_data_found Then--------------------
                                             Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0014','Invalid Currency');
                                      End;
                                Else
                                      Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0013','Currency differs from the value inputted in the loading screen');
                               End if;
                 Elsif lcol=9 then
                                If lvalue=Null THEN
                                      Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0015','Timestamp should not be null');
                                Elsif lvalue <> lvalue Then
                                     Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0046','Timestamp in header should be in the format YYYYMMDDHHMMSS');
                                End if;
                   End IF;
                  EXIT WHEN LToken IS NULL ;
                     i := i + 1 ;
                     lcol:=lcol+1;
                   End LOOP;
          Else
                                  Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (9999,'0002','First line should always start with 0');
          End if ;}
-------------------- For the 2nd Line , should be start from 9 .-----------------------------
{ lfirst_char := Substr(lstring,0,1);
IF lfirst_char = '9' Then
LOOP
LToken := mcb_simulator_pkg.Split( lstring, i , '|') ;
lvalue := LToken;
IF lcol=1 then
If lvalue < 0 THEN
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0017','Amount should be greater than zero');
Elsif lvalue = ltotal THEN
Dbms_output.put_line('20');
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0018','Transaction amount differs from the value inputted in the loading screen');
End if;
ELSIF lcol = 2 THEN
If lvalue = Substr(lac_no,4,9) THEN
mcb_simulator_pkg.Acct_no_Validator(lvalue,1111,l_ACno_Valid);
mcb_simulator_pkg.Swift_code_validator_for_ac_no(lvalue,1111,l_swift_code_acno);
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0020','Account number differs from the account number inputted in the loading screen');
End if;
ELSIF lcol = 3 THEN
If lvalue is not null THEN
mcb_simulator_pkg.Swift_code_validator_for_other(lvalue,1111,l_swift_code_others);
Else
Dbms_output.put_line('21');
End if;
END IF;
EXIT WHEN LToken IS NULL ;
i := i + 1 ;
lcol:=lcol+1;
End Loop;
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (8888,'0016','Second line should start with 9');
End IF; }
-------------------- For the 3rd Line Should be start from 1.--------------------------
{ LOOP
lfirst_char := Substr(lstring,0,1);
IF lfirst_char = '1' Then
Loop
LToken := mcb_simulator_pkg.Split( lstring, i , '|') ;
lvalue := LToken;
IF lcol=1 then
If lvalue > 0 THEN
Dbms_output.put_line('24');
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0017','Amount should be greater than zero'); End if;
ELSIF lcol=2 then
Mcb_simulator_pkg.Acct_no_Validator(lvalue,1111,l_ACno_Valid);
Mcb_simulator_pkg.Swift_code_validator_for_ac_no(lvalue,1111,l_swift_code_acno);
ELSIF lcol = 3 THEN
If lvalue is not null THEN
mcb_simulator_pkg.Swift_code_validator_for_other(lvalue,1111,l_swift_code_others);
Else
Dbms_output.put_line('26');
End
END IF;
EXIT WHEN LToken IS NULL ;
i := i + 1 ;
lcol:=lcol+1;
End Loop;
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (7777,'0022','The third line onward should start with 1');
End if;
END LOOP;
Commit;
End;}
Edited by: LuKKa on Oct 4, 2010 9:20 PM
Edited by: LuKKa on Oct 4, 2010 9:25 PM

Yes i gave {} but it is also coming like this ...Yes, since you should use {noformat}{noformat} before and after your example, and not putting your example between a '{' and a '}'.
So, when you post/type/copypaste:
{noformat}select *
from emp;{noformat}
on this forum, it will appear as:select *
from emp;See the FAQ for more tags/tips:
http://forums.oracle.com/forums/help.jspa

Creating Payment File in SAP after executing Automatic Payment transaction

Hi,
Need to know how is the Payment file created in SAP after executing Automatic Payment Transaction and how do I see the file and the fields.
Regards,
Kiran

Hi,
If you are using EDI format for sending the file to the Bank, then you need to map the fields to segments. You can consider basic type PEXR2002. You also need to make configuration settings - like enable payment method for EDI etc.
Once the payment run is executed you can run DME - Data Medium Exchange to generate Idocs for the payment run.
Thanks
Murali.

RFBIBL00 No Batch Input Created after Executing

Hello,
After Executing SAP standard report - RFBIBL00, no batch input session has been created in SM35 in ECC 6.0 version. There is no error message but one message displayed as 'PRODPER not transferred.'

First the issue was in the input file.
Second Number of lines was more and in the report it was set less.
Third in check only there will no Batch Input session generates.
Fourth to create input file use SAP standard procedure i.e sxda_tools.
Note : From ECC, SAP not supporting Batch Input Method.

Error after executing the edidlinv

Hi All,
Following is the error message i am facing after executing the batch edidlinv
edidlinv_1~20120229104954~process~invc_head, invc_detail, invc_xref, invc_merch_vat, invc_non_merch, item_master, sups, partner, vat_code_rates, v_restart_store_wh~-1405~ORA-01405: fetched column value is NULL~CURSOR FETCH: cursor=c_invoice, ps_driver_name=STORE_WH, ps_num_threads=1, ps_thread_val=1, ps_restart_invc_id=8678.
Regards,
Sushanth.D

please open the pro*c source in an editor, lookup the cursor mentioned, and study it and/or run it in sqlplus, to understand why no data is found.
E

After executing F.5E Trail Balance is not matching

Dear sir,
We have nearly 80 Business Area, for Business area wise trail balance match I executed the program F.5D & F.5E
After executing the F.5E for some Business Area Trail Balance is not matching.
How can I match the Trail Balance Business Area wise.
Any other program do I need to Execute
Please guide me

Dear expert
Find out the balance FIUT_180_BALANCE using SA38 and pass JV giving blank and respective business areas for debit and credit line items.You can check SAP Notes for detailed OSS note 203276 & 214289
Go to SE38 and run the following SAP standard programs to analyses the transaction that are not posted with Business area.
FIUT_180_APAR
FIUT_180_BALANCE
FIUT_180_BALDOC
FIUT_180_DELETE
FIUT_180_F5EDOC
FIUT_180_RF048
FIUT_180_SKIPDOC
FIUT_180_TAX
FIUT_180_TAX_I
FIUT_BA_CLEARING
FIUT_BA_DOCUMENT
FIUT_BA_I1
FIUT_BA_I2
FIUT_BA_INVOICE
See OSS note 199886 - Business area in tax line:
499633MIR7:business area as a required entry
186000Business area, unplanned delivery costs
137357Log. invoice verifcatn: GSBER when reducing invoice
125082SD-FI: Business area missing in customer item
96462Business area vendor item (invoice verification)
39409Business area in the vendor item
17483 - Business area for inventory postings
SAP Note 28562 - RFCHKN00 - Business area field not filled
SAP Note 27036 - Business area in company code clearing item
Note 582950 - Business area not transferred to line items
SAP Note 28080 - Incorrect business area or missing profit center
SAP notes 549182 & 73472
SAP note 321190
SAP note 746810 & 763985
Regards
Ajeesh.s

Report got failed after executing for 35min

Hi All,
I am using BIP 10.1.3.
I have a report which has been scheduled to generate output file (by using BIP scheduler).
It faied to generate the report after executing for 35 minute.
Is there any setting available in BIP server side so that the report will genrate the report.
Message Received:
oracle.apps.xdo.servlet.scheduler.ProcessingException: [ID:4676] Document file to deliver not found : /applic/oracle/product/10.1.3/OracleAS_BIP_1/j2ee/home/applications/xmlpserver/xmlpserver/xdo/tmp/xmlp54811tmp
     at oracle.apps.xdo.servlet.scheduler.XDOJob.deliver(XDOJob.java:1172)
     at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:495)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
Please suggest how to fix the issue.
Thanks

i would ask you to enable log and run it again, to get more details on this error.
the following is un-related to your issue.
i will also consider to upgrade to latest patch, which will get you away from most of the issues.

Moving to current record after execute query

Hi all,
I have a form where i can list all db jobs which can be start or stop.
for more details, form is having columns like jobs, current db status, action(start/stop drop down)
The user will view list of jobs in the screen and he straightly goes to a record and start (submit) the job using drop down for that record.
once they start/stop the job, execute query will fire to show the current status of the job.
Now going to my requirement,after execute query, I want to go to the record (job) which user has started the job .
Currently the cursor will go to first record.
Is there any oracle 10g AS property where i can get current record , put it in parameter and go to that record after execute query?
Is there any other way?
Regards,
Leonard

Hello,
If you are sure the record after query will keep the same position, you can before, store the current record in a number variable with Get_Block_Property( CURRENT_RECORD) built-in, then after query use the Go_Record() with stored number variable in parameter.
If you think that after re-query the record number can change, you have to loop through your records, then stop navidation while you find the corresponding key.
Francois

No Results after executing Adaptive Web Service

Hello experts,
I develope Web Dynpro applications and currently try to consume a web service from our ERP system but I get no results from the service. When trying to consume the service with a soap-tool or with .NET, everything works fine.
The Web Service was generated on an already available RFC.
The service has one input parameter, which is a department name. The output should be all employees, which work in the consigned department.
For consuming the service I created a Web Service Destination in the Visual Administrator ([see this blog|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3417100%29ID0139461950DB10406225565548708901End?blog=/pub/wlg/5186]).
After creating the Destination I imported the service as an adaptive web service model in my web dynpro project.
After binding the model to the component controller I implemented the following code in the controller:
public void wdDoInit()
    model = new Z_WF_DEPARTMENT_OIC();
    Request_ZWfDepartmentOic requestMO = new Request_ZWfDepartmentOic(model);
    ZWfDepartmentOic departmentMO = new ZWfDepartmentOic(model);
    requestMO.setZWfDepartmentOic(departmentMO);
    wdContext.nodeRequest_ZWfDepartmentOic().bind(requestMO);
public void executeRequest_ZWfDepartmentOic( )
try{
    wdContext.currentRequest_ZWfDepartmentOicElement().modelObject().execute();
    wdContext.nodeResponse().invalidate();
} catch (Exception e) {
    wdComponentAPI.getMessageManager().reportException(e.toString(),false);
I did the implementation as descibed in the following document:
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/900bbf94-a7a8-2910-e298-a651b4706c1e&overridelayout=true]
On the UI I have one input field for the department name and a table which should show the result and one table which shows messages which are returned by the web service.
After executing the code, I get no result from the service. In my table with the messages I get one entry which just shows zeros in the fields "LogMsgNo" and "Number".
Does anybody have a hint, what could be wrong with my proceeding?
Edited by: Dennis Isaak on Oct 16, 2009 10:37 AM

Check this blog post:
http://www.drflex.eu/2008/06/dynamically-populate-dropdown-lists-using-webservices/
This comfirms that after you execute a web service, the Drop-Down List fields will become empty due to remerge operation. Well, I have to issue a remerge, otherwise, the PDF will not be populated properly.
Tarek.

Error message after executing KKRC- How to define Hierarchy ID ?

Hi Gurus
Ours is a Chemical Mfg./ Marketing Company. We have ECC 5.0 version implemented in our Company. We have the Production process orders of different types ( Normal Process order , Reprocess Process order etc.). For the purpose of MIS it is our regular practice to download data in Worksheets & then work upon it ( pivot tables etc.) & compile the reports. We have the requirement to have SKU wise ( Finished Goodswise ) summarised compilation of different type of Variances ( both Qty. , value of input materials, wherever applicable) .
While browsing the SAPs BPX community database I have come across the query similar to my requirement . refer thread Product costing - Information system, order summarization
Posted: Sep 30, 2007 3:21 AM
As suggested in the response to that query I have followed the steps .
KKRV followed by KKRC . The error message after executing KKRC reads
No IDs defined for Hierarchy type CO
Diagnosis No Hierarchy id is defined in customising for the hierarchy type you selected
Procedure : go in to the customising and define the structure of hierarchy by means of an appropriate Hierarchy ID.
Can some one give me further leads ( i.e. navigation/path and clues for defining Hierarchy ID)
Or
is there any other way to address the requirement mentioned in opening para.
With best regards
Sudheer

Hi Patrick,
unfortunately I cannot provide an ad-hoc solution for your nested exception without further investigations.
Nevertheless I'm very interested to know, why you "gave up" using the Adaptive WS Model in Web Dynpro. What's the problem?
Perhaps the coding which now requires to create a model instance:
/** Hook method called to initialize controller. */
//@@end
public void wdDoInit() {
//@@begin wdDoInit()
// create a new model instance (1)
EmailAdWSModel model = new EmailAdWSModel();
// create model objects (2, 3)
Request_SendEmail requestMO = new Request_SendEmail(model);
SendEmail emailMO = new SendEmail(model);
// associate model objects (4)
requestMO.setSendEmail(emailMO);
// bind executable model object to context node (5)
wdContext.nodeRequest_SendEmail().bind(requestMO);
//@@end
Regards, Bertram

Trigger a background job after executing tcode MMPV

Hi All,
I would like to trigger a background job after executing tcode MMPV. In MMPV, after closing a particular period and entering
new period, the transaction will be saved. After saving, the background job should be triggered. How to do it?
Regards,
Vinod

Depending what system you are on your best bet would be to create an enhancement point inside a form, that is called after the save has been performed, and raise an event within that form.
Events can be used to trigger background jobs are maintained in transaction SM62.
Cheers.

Shows output / summary after executing a procedure

Developers have come to me, with below challenge, I am not able to solve / help with, found nothing from my 1 hour search on Google and forums.
Is there parameter in database or SQLPlus that shows output / summary after executing a procedure?
I have few updates and few inserts in my procedures, I also user[b] execute immediate once on my proc.
I want to know how many rows were updated / inserted, at the moment you just get ‘successfully completed.’ After executing a procedure.
SQL> @myproc.sql
PL/SQL procedure successfully completed.If anyone is 100% it's not possible, and you have to do it manually using dbms_output, please let me know.
Thanks for any help

PL/SQL executes inside the Oracle server process that is servicing your client session. How can it display anything on the client side?
SQL*Plus (a typical client) displays information messages such as "PL/SQL procedure successfully completed." - and it reads the DBMS_OUTPUT buffer in PL/SQL and write it to your display (when the SERVEROUTPUT SQL*Plus environment variable is set).
PL/SQL is incapable of "displaying" anything. Rendering is done the client.
It is important to grasp this basic client-server concept.
PL/SQL is also in fact two very distinct languages that are tightly integrated. PL and SQL. When PL executes a SQL statement, it does so via the same basic Oracle call interface as any other language. Part of this call interface contains the results of the SQL statement executed - this not only include a return code, but also the number of rows reported affected by the SQL engine. PL "publishes" that result via its system variable called SQL%ROWCOUNT.
However, due to the way PL calls SQL with respect to the different ways you can construct SQL in PL (implicit cursors, explicit cursors, ref cursors, etc), this variable is only valid when dealing with an implicit cursor. Cursor "system/SQL" variables also exist and these are prefixed with the variable name of the cursor in the format <cursorvar>%<sqlvar>.
Details can be found in the [url http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14261/toc.htm]Oracle® Database PL/SQL User's Guide and Reference.

Dbif_repo_sql_error after executing "sgen"

Similar Messages

Maybe you are looking for