DBIF_RSQL_SQL_ERROR while activating data in ODS
Hi,
I'm getting the following error when I try to activate the data in ODS. This is happening for all the ODSs in the system.
SQL-ERROR: 603 ORA-00603: ORACLE server session terminated by fat al error
System error: RSDU_ANALYZE_TABLE_ORA/ ORACLE
ABAP/4 processor: DBIF_RSQL_SQL_ERROR
Job cancelled
Any suggestion is greatly appreciated.
Thanks,
Vish
hi,
if not help, check oss note
840552
Symptom
On BW tables that belong to an InfoCube, statistics are calculated (COMPUTE) instead of estimated with the set percentage (ESTIMATE). This results in high runtimes.
Other terms
InfoCube, database, Oracle statistics
Reason and Prerequisites
In the Oracle-specific RSDU_ANALYZE_TABLE_ORA BW function, in some situations an estimation is made as to how many records are in the table to be analyzed. A SELECT in the USER_TABLES table is specifically used for this. If there is no value there now, 0 is returned and a COMPUTE is carried out. COMPUTE is considerably fasterer than ESTIMATE on small tables (under 10000 approximately).
However, if the table is too big and if the statistics were deleted by a brconnect run that ran shortly beforehand, the above situation of long runtimes mentioned above can occur.
Solution
BW 3.0B
Import Support Package 27 or 3.0B (BW3.0B Patch 27 or SAPKW30B27) into your BW system. The Support Package will become available oncenote 723258 with the short text, "SAPBWNews BW3.0B Support Package 27", which describes this Support Package in more detail, is released for customers.
BW 3.10 Content
Import Support Package 21 for 3.10 (BW3.10 Patch 21 or SAPKW31021 ) into your BW system. The Support Package will become available once <Z1>note 723263 with the short text, "SAPBWNews BW3.1 Content SP 21", which describes this Support Package in more detail, is released for customers.
BW 3.50
Import Support Package 13 for 3.5 (BW3.50 Patch 13 or SAPKW35013) into your BW system. The Support Package will become available oncenote 783254 with the short text, "SAPBWNews BW SP12 NetWeaver'04 Stack 13", which describes this Support Package in more detail, is released for customers.
In urgent cases, you can use the correction instructions.
To provide information in advance, the notes mentioned may already be made available before the Support Packages are released. However, the short text in this case will still contain the words "Preliminary version".
769416
Similar Messages
-
DBIF_REPO_SQL_ERROR short dumps while activating data in ODS
Hi All,
We are using BW3.5 with Oracle 9.2 on AIX 5.3 box, from the past few days we are getting DBIF_REPO_SQL_ERROR short dumps frequently while activating data in ODS.
Runtime Error DBIF_REPO_SQL_ERROR
Date and Time 08.01.2008 13:01:08
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
Internal call code.........: "[REPO/*/43/LOAD/CX_SY_OPEN_SQL_DB=============CP
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_REPO_SQL_ERROR" C
"SAPLRSSM_PROCESS" or "LRSSM_PROCESSF04"
"CHECK_IF_ANALYZE_IS_NESSESSARY"
System environment
SAP Release.............. "640"
Application server....... "psapdb"
Network address.......... "158.58.65.11"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "00CD615C4C00"
Character length......... 16 Bits
Pointer length........... 64 Bits
Work process number...... 22
Short dump setting....... "full"
Database server.......... "psapdb"
Database type............ "ORACLE"
Database name............ "BWP"
Database owner........... "SAPBWP"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Oct 29 2006 20:49:57"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "155"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16192
EM....................... 16759424
Heap..................... 0
Page..................... 24576
MM Used.................. 6604384
MM Free.................. 1772536
SAP Release.............. "640"
User and Transaction
Client.............. 200
User................ "R3REMOTE"
Language key........ "E"
Transaction......... " "
Program............. "SAPLRSSM_PROCESS"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "SAPLRSSM_PROCESS" in
"CHECK_IF_ANALYZE_IS_NESSESSARY".
The main program was "RSPROCESS ".
The termination occurred in line 1143 of the source code of the (Include)
program "LRSSM_PROCESSF04"
of the source code of program "LRSSM_PROCESSF04" (when calling the editor
11430).
The program "SAPLRSSM_PROCESS" was started as a background job.
Job name........ "BI_PROCESS_ODSACTIVAT"
Job initiator... "RPRIYANKA"
Job number...... 02010102
Also we have a failed job here. Here is the job log.
Job log overview for job: BI_PROCESS_ODSACTIVAT / 02010102
Date Time Message text
08.01.2008 13:01:00 Job started
08.01.2008 13:01:00 Step 001 started (program RSPROCESS, variant &0000000000188, user ID R3REMOTE)
08.01.2008 13:01:02 Activation is running: Data target HBCS_O25, from 1,758 to 1,767
08.01.2008 13:01:02 Data to be activated successfully checked against archiving objects
08.01.2008 13:01:02 SQL: 01/08/2008 13:01:02 R3REMOTE
08.01.2008 13:01:02 ANALYZE TABLE "/BIC/AHBCS_O2540" DELETE
08.01.2008 13:01:02 STATISTICS
08.01.2008 13:01:02 SQL-END: 01/08/2008 13:01:02 00:00:00
08.01.2008 13:01:02 SQL: 01/08/2008 13:01:02 R3REMOTE
08.01.2008 13:01:02 BEGIN DBMS_STATS.GATHER_TABLE_STATS ( OWNNAME =>
08.01.2008 13:01:02 'SAPBWP', TABNAME => '"/BIC/AHBCS_O2540"',
08.01.2008 13:01:02 ESTIMATE_PERCENT => 1 , METHOD_OPT => 'FOR ALL
08.01.2008 13:01:02 INDEXED COLUMNS SIZE 75', DEGREE => 1 ,
08.01.2008 13:01:02 GRANULARITY => 'ALL', CASCADE => TRUE ); END;
08.01.2008 13:01:05 SQL-END: 01/08/2008 13:01:05 00:00:03
08.01.2008 13:01:05 SQL-ERROR: 603 ORA-00603: ORACLE server session terminated by fat al error
08.01.2008 13:01:05 System error: RSDU_ANALYZE_TABLE_ORA/ ORACLE
08.01.2008 13:01:08 ABAP/4 processor: DBIF_REPO_SQL_ERROR
08.01.2008 13:01:08 Job cancelled
Listener is working fine, Checked the RFC connections, Tried restarting the system, tried adding space to the TEMP tablespace as well as PSAPBWP, but they didn't work.
Please help.The problem got solved as there were DB errors like ORA-01114: IO error writing block to file 256 (block # 126218).
Here the point to be notes is file 256. The number greater than 255 indicates a temp datafile. This indicates an issue with PSAPTEMP tablespace. When checked on PSAPTEMP tablespace, one of the filesystems where one temp data file sitting was full. The filesystem was 100% full. This will prevent the temp datafile to grow and shrink as and when required.
So, adding more space to the filesystem solved the problem.
Thanks to everyone who have shown interest in solving my problem. -
Error while activating data source in BI
Hello Team
I am facing issues while activating data source. I followed following steps .
a)First i created my target
b)Then i made my Primary key as info provider
c)Then i created one source system under file.
d)Then i went to data source and created one application component
e)In this application component i created my data source
f)In this data source i imported my file and all the settings. Now when i am checking then it is not giving any error . But when i am trying to activate it it is giving error . Please find the supporting screesnhots . Can anyone please suggest me as to what is going wrong .Hi,
Check the gateway settings for
Gateway Host
Gateway service
Also check the UDC connection information.
Check these links:
1 - http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/content.htm
2 - http://help.sap.com/saphelp_srm40/helpdata/es/54/ddfb3ff778ed28e10000000a1550b0/content.htm
3 - https://encrypted.google.com/url?sa=t&source=web&cd=7&ved=0CCwQFjAG&url=http%3A%2F%2Fwww.bi-
expertonline.com%2Fdownloads%2FSchroeder0604.doc&rct=j&q=ud%20connection%20in%20sap%20bi&ei=WMDnTdm_E4ruvQOEzZWcDg&usg=AFQjCNGvqKuoTq9kypNMNGhis8WrZ-gFCg&cad=rja
Let us know in case the issue still persists.
Debanshu -
Error while activating Data source
Hi,
I hit an error while activating data source with adapter 'WEB_PUSH web service'.
The error message is 'Generation of conversion exists and PSA update ...' with details 'Error generating Web service /BIC/CZZZ_0010000100 ...' and 'Error when activating DataSource ZZZ_001'.
I can't find much detail on this error.
Has anyone hit this error before and if you did can you please let me know what to check?
Thks & Regards,
BbeeHi,
I am having the same problem. Have you been able to solve the issue since you posted this last year?
Thanks,
TCT -
Error while activating data from new table of DSO to active table
HI,
while activating data from new table of DSO to active table i am getting
error message as "Error occurred while deciding partition number".
Plz any idea hoe to resolve this one.
thanks & regards
KPS MOORTHYHi
You are trying to update/upload the Records which are already been there in the DSO Active Data Table which has the partition.
Try to see the Record Nos already been activated and update/upload with selective, if possible.
You can trace the changes at Change log table for the same.
Hope it helps
Edited by: Aduri on Jan 21, 2009 10:38 AM -
Invalid character error while activating data in DSO.
Hi Experts,
We are facing an issue with presence of invalid characters in data from source. This throws SID generation error while activating data in DSO. Long text of error shows like this:
"Value " ĠĠĠĠĠĠĠĠĠĠĠĠĠĠĠ" (HEX 000D0120012001200120012001200120012001200120012001) of characteristic contains an error at position 1"
Also we've tried adding the character " Ġ " in TCode RSKC, but it then shows as a rectangle box which I'm not able to copy manually(looks like a blank space or something of that sort).
We've tried implementing routine to remove special characters while loading data, but still it fails. Due to huge amounts of data, its practically unfeasible to check each record manually.
Any useful suggestions will be acknowledged.
regards,
anoopHi,
We are using following code for the same purpose. U can use it at infoobject level mapping. This code will check value of each character in the data coming, whether it is in RSKC, if it is a allowed one then it will be passed as it is. Otherwise it will replace that character by space.
data: l_d_length like sy-index,
l_d_char type c,
l_d_index type sy-index,
l oopx like sy-tabix.
data : xinfobj(30) type c value 'RABC'. -> this is ur infoobject name
clear : result.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = tran_strucutre-XYZ -> object name in ur structure
importing
output = result.
l_d_length = strlen( result ).
do l_d_length times.
l_d_index = sy-index - 1.
l_d_char = result+l_d_index(1).
call function 'RSKC_CHAVL_OF_IOBJ_CHECK'
exporting
i_chavl = l_d_char
i_iobjnm = xinfobj
I_S_COB_PRO =
I_T_COB_PRO_CMP =
exceptions
chavl_not_allowed = 1
others = 2
if sy-subrc <> 0.
result+l_d_index(1) = ' '.
endif.
enddo.
Regards;
Jitendra -
Error in Source System While Uploading Data from ODS to Data Target
Hi All,
Iam getting Following Error while Uploading data from ODS to Data Target
a) Error in Source System.
b)DataSource 80MKT_DS01 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80MKT_DS01 does not have the status of the source system in the Business Information Warehouse.
The time stamp in the source system is 21.06.2005 07:31:33.
The time stamp in the BW system is 27.11.2004 17:41:45.
Regards,
ChakriThis generally occurs when you change the data source or enhance the data source or the coonections to the datasoiurse are broken. To resdolve thius sort of errors just
1. Check for the coonect between the sourse & target systems
2 . Replicate the data sourcses.
3. Acivated TR,UR,& the rest of the flow But check in the source system if the structre is modified & is so do the changes in the IS , TR,UR correspondingly & the try to load .Hoppe it allows you to load .
Thanks ,
PSG -
Error while loading data to ODS
Hello BW folks ,
I am getting an error while loading data to ODS from R/3 data source.
The error message is " Error in PSA".
We have deleted yesterday data from PSA for the related infosource/data source successfully .
Since then this error is occuring. Previously data upload was successful.
In Detail tab of monitor we are getting error message in Request option ( red Mark )
and the same request is not going to R/3 .
<b>The related Job itself is not present in R/3 .</b>
This looks very strange and new to me .
Could anyone help me in rectifying this issue ?
Thanks in Advance.
Best Regards ,
Amol.Hello All,
Thanks for reply.
I tried to replicate the data source once again and activate the transfer rules in BW Production by running program in SE38 = RS_TRANS* activate all tranfer sturctures , then I got an error message that one infoobject is added to transfer rules in BW Production .
But interestingly the same Transfer rules do not have this infoobject in BW Development server . So I create once again a request for Transfer rules in Dev and transported it to BW production.
and This solved the problem
The error message in Monitor was " Error in PSA " and then request itself was not going to R/3 . But the real issue was with Transfer rules. So after rectifying it we have solved the problem of data upload.
Best Regards ,
Amol Kulkarni. -
Error While Deleting Data From ODS
Hi all,
We are getting short dump while deleting data from a perticular ODS.
Part of short dump is--
trigger Location of Runtime Error
Program SAPLRSAC
Include LRSACU75
Row 535
Module type (FUNCTION)
Module Name RSAR_TRANSTRUCTURE_ACTIVATE
help is desperately required
Regards
Srini--try to activate InfoSource and later delete data.
Check if all ODS related objects are consistent and active.
also pls attached the whole dump for more clarity if this does not work. -
Error while activating data in DSO
Hi Gurus, While activating I am getting these 2 messages "Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER" and the other message is "Fiscal year variant K4 not expected" and in some other Data Packages I am getting "Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER"
Kindly help in this matter.Hi,
Try these threads.
Error when activating data in 0FI_GL_04 ODS (SIDS)
Unable to activate data in DSO
Error when assigning SID : Action VAL_SID _CONVERT table
Can'T Activate ODS Data
FI error in rspc chain
Same issue as yours.
Hope this helps.
Thanks,
JituK -
Error while activating data in process chain
Hi All,
Am getting following error msgs in process chain while activating the data store object variant
1.Cannot activate request 0000015195(REQU_78CEI406HFCMG85RWNSKW6HW4) of DataStore object RC2SCD10
2.Activation of M records from DataStore object RC2SCD10 terminated.
Any help how to resolve this error.
Regards
Sirisha.
Edited by: sirisha gupta on Dec 29, 2008 10:16 AMhello,
firstly see if the DSO and the transfomration, DTP are all active.
or
This can be due to the incorrect data record in ods
find that record in PSA correct that one and then try to run the load fro PSA to Data target.
or
Uncheck "SID's Generation upon activation" in DSO's settings.
or
you can also try by changing the "Parallel Processing" to "Serial Processing".
In the maintenance screen of DSO, select "Requests" tab:
Click on the "Activate" button at the bottom
Click on the "Activate in Parallel" button
Change the "Number of Processes" to "1" for Serial Processing
Save the setting
You should see the "Activate in Parallel" button with a cross icon now.
Check SAP Notes: 1118205 & 947481
refer:
DataStore object Activation
reg,
dhanya -
Error while uploading data from ODS to Cube
Hi All,
Will you please help out this issue.As this is a priority high issue,please reply if you know the answers.
I am facing an error while loading the data from ODS to CUBE,the error
is
<b>1.Name is not in the namespace for generated BW Metaobjects
2.Error 18 in the update</b>
And this error is occuring only in quality server.
Thanks,
Ram.HI RAM SIVA,
make sure that the Data source is replicated and tranfer rules r active.
And also check whether the all transport requests r imported properly.
hope it helps
bhaskar -
Error While Extracting Data in ODS
can anyone help me out i have created an ODS ZMM_OD81 but i got the following error messaged while extracting the data, pl. help me asap.
1. SIDs determined successfully for request REQU_3YGDERK275SLEUNKLGWOR30GZ from ODS object ZMM_OD81
2. Request REQU_3YGDERK275SLEUNKLGWOR30GZ , data package 000001 incorrect with status 9
3. Request REQU_3YGDERK275SLEUNKLGWOR30GZ , data package 000001 not correct
4. Inserted records 1- ; Changed records 1- ; Deleted records 1-
5. No confirmation for request ODSR_3YGHO1DSYIDFO0B7E8ZO2Q8MB when activating the ODS object ZMM_OD81
6. Communication error (RFC call) occurred
7. Activation of data records from ODS object ZMM_OD81 terminated.
thanx
abhishek suppalHi Abhishek,
I guess the error occured while activating the request and not while loading it. You can confirm this by checking in the details tab of the monitor for that request.
Try following the below steps. They might solve your problem.
1> Go to manage view of the ODS and force the QM status of the request to 'GREEN'.
2> Try activating the request manually.
Regards,
Sree -
Error While Loading Data from ODS to ODS
Hi Experts,
When i'm loading the data from ods to further ods, i'm facing an error while activating the data saying that 0ref_doc_no consists of invalid characters.Also it is saying that Error when assigning SID.
I'm unable to see the long text for further information.
Regards,
VijayHi vijay bhaskar,
first go to RSA1 -> go to datasource -> search for the data source with name "8<old DSO>". Go to dispaly and click on PSA button on top. Now you can see PSA data request. in the bottom left you select error records and display. now you will see all the error records. go through each and every records and see what is the special characteristic in that record and copy that special character in notepad. After collecting all the special characters in notepad, goto RSKC -> paste all the special characteristics from note pad. execute it.
Now, go back to PSA, delete the request from PSA. Schedure the infopackage to load the data. Now, will not see any error like special characteristics.
I hope you understood and can handle your issue.
Assign points if it is helpful.
Reagds,
S P. -
Hi
I have got one ODS, for which my infopackage is desigen as do not update data if no master data exists for a characteristic.
But one of my request which is having only the entries in master data, is not getting activated in ODS.Its failing with the error "No SID found for value '00DU023R ' of characteristic 0MATERIAL". but the material 00DU023R is not there in the request at all.
Doest anyone phased this scenario before? how to activate the data in ODS?
Regards
SriramHi Sriram,
What SSree is trying to see.
Go to your ODS, right click manage.
In the requests tab, choose a very old date and choose refresh. Now check if you see any red requests. These requests will prevent from activating.
On the other hand, when I see your first error, I would go to transaction RSRV, and do some consistency checks on your ODS and master data.
kr,
Tom
Maybe you are looking for
-
Problem while sending attachment thru 'SO_DOCUMENT_SEND_API1'
Hi Experts , I am trying to send two excel files thrugh the function module 'SO_DOCUMENT_SEND_API1' . Attachments are reaching the destination email address successfully , But along with two attacments its sending one more .txt file also in which em
-
The sqlite files sends me over quota. Is there any plan to fix this?
This thread [ https://support.mozilla.org/en-US/questions/786526 ] I found that was closed last year makes it look like you guys are aware of the problem and just don't care about people who have storage limits in the workplace they have to deal with
-
Regarding the query containing $[$28.1.0]
Hi, Can someone help me with this code.. SELECT (T0.OnHand-T0.IsCommited) FROM OITW T0 WHERE T0.ItemCode = $[$5.1.0] and T0.WhsCode = $[$28.1.0] I have a document downloaded from SAP site. This query works fine when i hard code the value in place of
-
Acrobat Elements.exe memory could not be read
Every time I right click on either a Word or Excel document and select Convert To PDF, it immediately gives the error: Acrobat Elements.exe - Application Error - The instruction at "xxxxxxx" referenced memory at "xxxxxxx". The momory could not be "r
-
Private browser option is missing
I added an app (forgot the name of it) that was going to end "private browsing" because I wasnt to sure how to do it. Now the option in the tools dropdown menu is gone.... I am stuck in private mode and cant find a way to correct it. I've tried addin