Activating Data in ODS

Hi
I have got one ODS, for which my infopackage is desigen as do not update data if no master data exists for a characteristic.
But one of my request which is having only the entries in master data, is not getting activated in ODS.Its failing with the error "No SID found for value '00DU023R ' of characteristic 0MATERIAL". but the material 00DU023R is not there in the request at all.
Doest anyone phased this scenario before? how to activate the data in ODS?
Regards
Sriram

Hi Sriram,
What SSree is trying to see.
Go to your ODS, right click manage.
In the requests tab, choose a very old date and choose refresh. Now check if you see any red requests. These requests will prevent from activating.
On the other hand, when I see your first error, I would go to transaction RSRV, and do some consistency checks on your ODS and master data.
kr,
Tom

Similar Messages

DBIF_REPO_SQL_ERROR short dumps while activating data in ODS

Hi All,
We are using BW3.5 with Oracle 9.2 on AIX 5.3 box, from the past few days we are getting DBIF_REPO_SQL_ERROR short dumps frequently while activating data in ODS.
Runtime Error          DBIF_REPO_SQL_ERROR
Date and Time          08.01.2008 13:01:08
     1. A printout of the problem description (short dump)
        To obtain this, select in the current display "System->List->
        Save->Local File (unconverted)".
     2. A suitable printout of the system log
        To obtain this, call the system log through transaction SM21.
        Limit the time interval to 10 minutes before and 5 minutes
        after the short dump. In the display, then select the function
        "System->List->Save->Local File (unconverted)".
     3. If the programs are your own programs or modified SAP programs,
        supply the source code.
        To do this, select the Editor function "Further Utilities->
        Upload/Download->Download".
     4. Details regarding the conditions under which the error occurred
        or which actions and input led to the error.
     Internal call code.........: "[REPO/*/43/LOAD/CX_SY_OPEN_SQL_DB=============CP
     Please check the entries in the system log (Transaction SM21).
     You may able to find an interim solution to the problem
     in the SAP note system. If you have access to the note system yourself,
     use the following search criteria:
     "DBIF_REPO_SQL_ERROR" C
     "SAPLRSSM_PROCESS" or "LRSSM_PROCESSF04"
     "CHECK_IF_ANALYZE_IS_NESSESSARY"
System environment
    SAP Release.............. "640"
    Application server....... "psapdb"
    Network address.......... "158.58.65.11"
    Operating system......... "AIX"
    Release.................. "5.3"
    Hardware type............ "00CD615C4C00"
    Character length......... 16 Bits
    Pointer length........... 64 Bits
    Work process number...... 22
    Short dump setting....... "full"
    Database server.......... "psapdb"
    Database type............ "ORACLE"
    Database name............ "BWP"
    Database owner........... "SAPBWP"
    Character set............ "C"
    SAP kernel............... "640"
    Created on............... "Oct 29 2006 20:49:57"
    Created in............... "AIX 1 5 00538A4A4C00"
    Database version......... "OCI_920 "
    Patch level.............. "155"
    Patch text............... " "
    Supported environment....
    Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
     10.2.0.."
    SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16192
EM....................... 16759424
Heap..................... 0
Page..................... 24576
MM Used.................. 6604384
MM Free.................. 1772536
SAP Release.............. "640"
User and Transaction
    Client.............. 200
    User................ "R3REMOTE"
    Language key........ "E"
    Transaction......... " "
    Program............. "SAPLRSSM_PROCESS"
    Screen.............. "SAPMSSY0 1000"
    Screen line......... 6
Information on where terminated
    The termination occurred in the ABAP program "SAPLRSSM_PROCESS" in
     "CHECK_IF_ANALYZE_IS_NESSESSARY".
    The main program was "RSPROCESS ".
    The termination occurred in line 1143 of the source code of the (Include)
     program "LRSSM_PROCESSF04"
    of the source code of program "LRSSM_PROCESSF04" (when calling the editor
     11430).
    The program "SAPLRSSM_PROCESS" was started as a background job.
    Job name........ "BI_PROCESS_ODSACTIVAT"
    Job initiator... "RPRIYANKA"
    Job number...... 02010102
Also we have a failed job here. Here is the job log.
Job log overview for job:    BI_PROCESS_ODSACTIVAT / 02010102
Date       Time     Message text
08.01.2008 13:01:00 Job started
08.01.2008 13:01:00 Step 001 started (program RSPROCESS, variant &0000000000188, user ID R3REMOTE)
08.01.2008 13:01:02 Activation is running: Data target HBCS_O25, from 1,758 to 1,767
08.01.2008 13:01:02 Data to be activated successfully checked against archiving objects
08.01.2008 13:01:02 SQL: 01/08/2008 13:01:02 R3REMOTE
08.01.2008 13:01:02 ANALYZE TABLE "/BIC/AHBCS_O2540" DELETE
08.01.2008 13:01:02 STATISTICS
08.01.2008 13:01:02 SQL-END: 01/08/2008 13:01:02 00:00:00
08.01.2008 13:01:02 SQL: 01/08/2008 13:01:02 R3REMOTE
08.01.2008 13:01:02 BEGIN DBMS_STATS.GATHER_TABLE_STATS ( OWNNAME =>
08.01.2008 13:01:02 'SAPBWP', TABNAME => '"/BIC/AHBCS_O2540"',
08.01.2008 13:01:02 ESTIMATE_PERCENT => 1 , METHOD_OPT => 'FOR ALL
08.01.2008 13:01:02 INDEXED COLUMNS SIZE 75', DEGREE => 1 ,
08.01.2008 13:01:02 GRANULARITY => 'ALL', CASCADE => TRUE ); END;
08.01.2008 13:01:05 SQL-END: 01/08/2008 13:01:05 00:00:03
08.01.2008 13:01:05     SQL-ERROR: 603 ORA-00603: ORACLE server session terminated by fat al error
08.01.2008 13:01:05 System error: RSDU_ANALYZE_TABLE_ORA/ ORACLE
08.01.2008 13:01:08 ABAP/4 processor: DBIF_REPO_SQL_ERROR
08.01.2008 13:01:08 Job cancelled
Listener is working fine, Checked the RFC connections, Tried restarting the system, tried adding space to the TEMP tablespace as well as PSAPBWP, but they didn't work.
Please help.

The problem got solved as there were DB errors like ORA-01114: IO error writing block to file 256 (block # 126218).
Here the point to be notes is file 256. The number greater than 255 indicates a temp datafile. This indicates an issue with PSAPTEMP tablespace. When checked on PSAPTEMP tablespace, one of the filesystems where one temp data file sitting was full. The filesystem was 100% full. This will prevent the temp datafile to grow and shrink as and when required.
So, adding more space to the filesystem solved the problem.
Thanks to everyone who have shown interest in solving my problem.

DBIF_RSQL_SQL_ERROR while activating data in ODS

Hi,
I'm getting the following error when I try to activate the data in ODS. This is happening for all the ODSs in the system.
SQL-ERROR: 603 ORA-00603: ORACLE server session terminated by fat al error
System error: RSDU_ANALYZE_TABLE_ORA/ ORACLE
ABAP/4 processor: DBIF_RSQL_SQL_ERROR
Job cancelled
Any suggestion is greatly appreciated.
Thanks,
Vish

hi,
if not help, check oss note
840552
Symptom
On BW tables that belong to an InfoCube, statistics are calculated (COMPUTE) instead of estimated with the set percentage (ESTIMATE). This results in high runtimes.
Other terms
InfoCube, database, Oracle statistics
Reason and Prerequisites
In the Oracle-specific RSDU_ANALYZE_TABLE_ORA BW function, in some situations an estimation is made as to how many records are in the table to be analyzed. A SELECT in the USER_TABLES table is specifically used for this. If there is no value there now, 0 is returned and a COMPUTE is carried out. COMPUTE is considerably fasterer than ESTIMATE on small tables (under 10000 approximately).
However, if the table is too big and if the statistics were deleted by a brconnect run that ran shortly beforehand, the above situation of long runtimes mentioned above can occur.
Solution
BW 3.0B
           Import Support Package 27 or 3.0B (BW3.0B Patch 27 or SAPKW30B27) into your BW system. The Support Package will become available oncenote 723258 with the short text, "SAPBWNews BW3.0B Support Package 27", which describes this Support Package in more detail, is released for customers.
BW 3.10 Content
           Import Support Package 21 for 3.10 (BW3.10 Patch 21 or SAPKW31021 ) into your BW system. The Support Package will become available once <Z1>note 723263 with the short text, "SAPBWNews BW3.1 Content SP 21", which describes this Support Package in more detail, is released for customers.
BW 3.50
           Import Support Package 13 for 3.5 (BW3.50 Patch 13 or SAPKW35013) into your BW system. The Support Package will become available oncenote 783254 with the short text, "SAPBWNews BW SP12 NetWeaver'04 Stack 13", which describes this Support Package in more detail, is released for customers.
In urgent cases, you can use the correction instructions.
To provide information in advance, the notes mentioned may already be made available before the Support Packages are released. However, the short text in this case will still contain the words "Preliminary version".
769416

ODS - Number of Active Data Records count?

Hi,
I am having a ODS. In manage screen of ODS, i can able to see the records as shown bellow:
Transferred records: 352053
Added Records: 1836
But the number of entries in Active Data of ODS is only 471 records.
My question here is that why Added records (1836) are not equal to number of Active data records (471)? Where i am missing or is it correct?
Best Regards,
Venkata.

Hi,
Have you completed the Activation of ODS data after uploading? If no see the entries in NEW records' table of ODS.
If you have activated already,still there is a chance to have different count, because of no of records with same value of KEY fields but exist in different packets.
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar

"#" in the ODS active data view

Hi all,
I have a question. I load data (text strings) into ODS object. Then I look into new or active data and I can see symbols "#" on the places in strings, where occurs any special character (for example from any language). I do not know wheteher it is stored in SAP (database) in this bad format or wheteher it is only represented in this bad format due to my different encoding ?? Normally special characters are represented in GUI well. Thanks
JJ

Hi JJ,
as you can see them in the middle of the texts, it just the way BW displays these characters.
Siggi

Does activation fails in ods when it is acting as source & loading data

Hi All,
If i am loading data from ODS to cube which is nothing but repair full (data from active table), i bring delta to ODS & start ods activaion of the delta request will it fail due to the lock on the active table?
Thanks in advance

Hi,
The data load happens this way in the DSO.
DSO consists of three tables namely "new,Active and changelog tables".
When you load the data to DSO, records sit in New table.
When you Activate the data records move to Active table creating a before,After image in change log.
when you are running the load from DSO to CUBE, the records are loaded from the Active or Change log based on the setting.
So these tables will be locked when you are using them to load the cube.
when you are activating the data in DSO, it means that we are moving data from new to active table.
So when loading from DSO the tables are locked and when activating, you are tring to move data in these tables which is not possible.
So,we cannot activate DSO same time when some records are loding from same dso to cube
Hope this helps.
Regards,
Haritha.

Activation of new data in ODS results in errors. Urgent.please help...

Dear experts,
I have a problem while I load data from one ODS object into another one. I have some keyfigs which when loaded into the ODS are ok. (I mean the new data is ok) but the moment I activate the request, the keyfigures are turned automatically to zero. This peculiar performance is not observed in any of our development and certification systems. Another thing, is that the data load is an initial load and there exists nothing in the change log table as well before the load.
Any thoughts are highly appreciated. Any SAP notes on this issue??? Please help... urgent...
Kind Regards,
Shravan

Hello Prasad/Rohini,
Thanks for helping me. Yes, I checked the update rules and they are ok. The problem is not with the update rules, I guess. I delete the data first in ODS 1 and from ODS2 I load the data into ODS1. The data load is an init update. After loading the data, before activating the request, The new data is all ok. The key figure data is all as that is guided by the corresponding update rules. The moment I activate the request, the active data is all wrong. My Question is why the table containing new data is correct and after not after activating???
Since it is an initial update, I do not think change log should come into picture???
Any ideas???
Kind Regards,
Shravan

How to create DB partitioning in active data tables for ods?

hi all,
Can anyone let me know how to create DB partitioning in active data tables for ods. if any docs pls share with me at my email id : [email protected]
regds
haritha

Haritha,
The following steps will briefly explain you to improve the performance in terms of DB partitioning as well as loading. Please find the same,
transaction RSCUSTA2,
oss note 120253 565725 670208
and remove 'bex reporting' setting in ods if that ods not used for reporting.
hope this helps.
565725
Symptom
This note contains recommendations for improving the load performance of ODS objects in Business Information Warehouse Release 3.0B and 3.1 Content.
Other terms
Business Information Warehouse, ODS object, BW, RSCUSTA2, RSADMINA
Solution
To obtain a good load performance for ODS objects, we recommend that you note the following:
1. Activating data in the ODS object
In the Implementation Guide in the BW Customizing, you can implement different settings under Business Information Warehouse -> General BW settings -> Settings for the ODS object that will improve performance when you activate data in the ODS object.
1. Creating SIDs
The creation of SIDs is time-consuming and may be avoided in the following cases:
a) You should not set the indicator for BEx Reporting if you are only using the ODS object as a data store.Otherwise, SIDs are created for all new characteristic values by setting this indicator.
b) If you are using line items (for example, document number, time stamp and so on) as characteristics in the ODS object, you should mark these as 'Attribute only' in the characteristics maintenance.
SIDs are created at the same time if parallel activation is activated (see above).They are then created using the same number of parallel processes as those set for the activation. However:if you specify a server group or a special server in the Customizing, these specifications only apply to activation and not the creation of SIDs.The creation of SIDs runs on the application server on which the batch job is also running.
1. DB partitioning on the table for active data (technical name:
The process of deleting data from the ODS object may be accelerated by partitioning on the database level.Select the characteristic after which you want deletion to occur as a partitioning criterion.For more details on partitioning database tables, see the database documentation (DBMS CD).Partitioning is supported with the following databases:Oracle, DB2/390, Informix.
1. Indexing
Selection criteria should be used for queries on ODS objects.The existing primary index is used if the key fields are specified.As a result, the characteristic that is accessed more frequently should be left justified.If the key fields are only partially specified in the selection criteria (recognizable in the SQL trace), the query runtime may be optimized by creating additional indexes.You can create these secondary indexes in the ODS object maintenance.
1. Loading unique data records
If you only load unique data records (that is, data records with a one-time key combination) into the ODS object, the load performance will improve if you set the 'Unique data record' indicator in the ODS object maintenance.
Hope this helps..
****Assign Points****
Thanks,
Gattu

Data activation problem at ODS

Hi All,
     I am not able to load the purchasing data 2lis_02_scl (init load) in to ODS, Actually I am getting error message at data activation in ODS level.
The error messages are
1. Activation of M records from DataStore object ZP2_PSCL terminated
2. Error during confirmation of process 000001
3. Caller 09 contains an error message.
4. A caller 01, 02 or equal to or greater than 20 contains an error meesage.
5. The material PBG600 does not exist or is not activated
There is no material with that name in BW as well as R/3. And below I am giving the job log details of ODS activation.
Job started
Step 001 started (program RSODSACT1, variant &0000000060772, user ID U6X9539)
Activation is running: Data target ZP2_PSCL, from 1,572,117 to 1,572,117
Overlapping check with archived data areas for InfoProvider ZP2_PSCL
Check not necessary, as no data has been archived for ZP2_PSCL
Data to be activated successfully checked against archiving objects
SQL: 06.06.2007 09:09:48 U6X9539
BEGIN DBMS_STATS.FLUSH_DATABASE_MONITORING_INFO;
END;
SQL-END: 06.06.2007 09:09:49 00:00:01
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_461J7HV0XMIXCCH1SE9VX63A6 with ID
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_461J7HV0XMIXCCH1SE9VX63A6 with ID
Parallel processes (for Activation); 000003
Timeout for parallel process (for Activation): 000300
Package size (for Activation): 020000
Task handling (for Activation): Backgr Process
Server group (for Activation): No Server Group Configured
Activation started (process is running under user U6X9539)
All data fields updated in mode "overwrite"
Process started
Error during confirmation of process 000001
Data pkgs 000001; Added records 1-; Changed records 0; Deleted records 0
Log for activation request ODSR_461J7HNCENX7TPXLMK7JN44KE data package 000001...000001
Errors occured when carrying out activation
Analyze errors and activate again, if necessary
Activation of M records from DataStore object ZP2_PSCL terminated
Activation is running: Data target ZP2_PSCL, from 1,572,117 to 1,572,117
Overlapping check with archived data areas for InfoProvider ZP2_PSCL
Check not necessary, as no data has been archived for ZP2_PSCL
Data to be activated successfully checked against archiving objects
Parallel processes (for Activation); 000003
Timeout for parallel process (for Activation): 000300
Package size (for Activation): 020000
Task handling (for Activation): Backgr Process
Server group (for Activation): No Server Group Configured
Activation started (process is running under user U6X9539)
All data fields updated in mode "overwrite"
Process started
Error during confirmation of process 000001
Data pkgs 000001; Added records 1-; Changed records 0; Deleted records 0
Log for activation request ODSR_461J7HNCENX7TPXLMK7JN44KE data package 000001...000001
Errors occured when carrying out activation
Analyze errors and activate again, if necessary
Activation of M records from DataStore object ZP2_PSCL terminated
Activation of M records from DataStore object ZP2_PSCL terminated
Report RSODSACT1 ended with errors
Job cancelled after system exception ERROR_MESSAGE
Please help me on this issue.
Regards,
PRK

Hi,
   Thanks to all, After loading the master day I am trying to load the transaction data for purchasing information.
   Right now the data at ODS is not activating and is showing the two below error message.
Error Message
1. Activation of M records from DataStore object ZP2_PSCL terminated
2. Error during confirmation of process 000001
   Please help me on this issue.
Regards,
PRK

View data in ODS

BW Experts,
I have a new ODS and have loaded data in it. When I rt click on the ODS and choose manage and then if I want to see the contents of the ODS I am getting the following error.
<b>System error: RSDRC / FORM AUTHORITY_CHECK USER NOT AUTHORIZED ZSD_O01 ZSD_O01
Message no. DBMAN100
Diagnosis
A system error with the following parameters has occurred in the data manager:
Parameter 1 = &v1&
Parameter 2 = &v2&
Parameter 3 = &v3&
Parameter 4 = &v4&</b>
However, I can still see my data through my active data table tab.
Any thoughts on why I am getting this error when I want to see it directely through manage ods?
Thanks
Ashwin

Hi Ashwin,
Is the ODS enabled for reporting? I came across a similar situation recently and it was because I did not have the auth for data access for that particular ODS. I could look at the data through SE16 and the active data table, but not if I did a LISTCUBE for it.
After it was added to a role and assigned, the error message was removed. (Auth object: S_RS_ODSO)
Hope this helps...

Append data in ODS

Hey Folks,
I load data into an ODS, weekly. The data contains status information of a product.
The source system delivers only data where the status has changed.
If the status for on product is constant over two or more weeks, I get no record of this product for the current week. But I want to display the status for this product in the current week.
So I need to insert records in my ODS for all products where I don't get a record from the source system for the current week.
I got the information that I need a start routine and implement my logic with ABAP
There are any other ways, or can somebody explain me, how to do this with ABAP?
Thanks for your help!
Stephan

Hi Stephan,
Please try this logic.
Load the transaction data for the ODS weekly as per you source sytem data.
Now you need to update based on constant status. You can write a ABAP program with the below logic.
Create internal tables for Master Data and ODS and read all the contents into it.
Get the details from Master Data and manually update the status field (No data from source system)and store it in a internal table (Internal table - Same strcuture as that of active records table /BIC/AZ***)which has records to be appended to the ODS.
Append it to the active records table of the ODS.
Hope this helps.
Thanks,
Srinivas.

Activate data in ODS

Hi Gurus,
Im loading data from ods to ods thru full update and after that I have to activate that ODS,
Kindly let me know the steps for activating the ODS,
right click on the ods and press activate data n ods
or before i have to do Update ods in data target.
Raj

1ST we have to go for ODS in Data target and right click on the ODS.
In that options click on Generate Export Data Source.Then go to Source system to identify the Data Source.
It will starts with 8 later What everyou had given the ODS name you have to give in Search.
Later you have to create infopackage for that ODS and load data in to that IP.
next come to Data Target and create the new ODS.
Give the update rules with the data source what ever you had created now.
later you have to create info Package for that ODS and load the data for that IP.
Hope it will helps you..........

No data in ODS

Hi Friends,
I dont see any data in my ODS, My loading went fine, then I went to my ODS , Right click > Activate data in ODS , what must be the problem??
thanks in advance,

ODS >Context Menu>Manage
Go to content tab, check the tables (active, new). It should be in one of the tables.
Is activation over?

Deleting data in ODS

HI Kudos!
Please let me know the methods of deleting the data in ODS of all the tables before and after activation. Let me know if any blogs are there.
thanks in advance.
kalyan Pidugu.

Hi Kalyan,
As Malli mentioned those are the ways you can delete the data...again it depends on the update mode used for data loads. If it is a delta load from R3 make sure u mark it as red before deleting so you dont loose data from subsequent deltas.
if it is full update and if u wish to delete it u can simply delete it coz BW will mark it as red.
What is it do u want to know abt activation?
Assign points if useful
Arun

Data in ods

Hai Experts,
Can any body tell me data is present in active data table, new data table, change log table and as wel as with this there is a content button it is asking for the table name what is that button consists of can any body help me out
Regards,
Vikram

Hi Vikram,
If we right click ODS --> go to Manage --> contents Tab
You will find three Tables
1. New Table : when you load Data initially it gets into New Table and if you click on that you can see the Content
2. Active and Change Log : when you Activate data in ODS the Data moves from new to active and change log Tables and used for futher processsing to other Data Targets like Cube or ODs again.
Change Log Table records all the changes happend to the data.
Check this blog for more info
/people/raj.alluri/blog/2006/11/24/the-tech-details-of-standard-ods-dso-in-sap-dwh
Hope this helps,
Sudhakar.

Activating Data in ODS

Similar Messages

Maybe you are looking for