Dbsql version of the database how to read noSQL

dbsql version of the database how to read noSQL?
Is there a way to achieve?

Your question is extremely difficult to understand. However, because you are asking about dbsql, I think you are in the wrong forum. This is the BDB JE forum, and BDB JE does not support sql. The BDB (C-based) product does support sql. Please post your questions to the BDB forum:
Berkeley DB
--mark

Similar Messages

Fatal Error: The schema version of the database is from a newer version of WSUS

Hello,
CM2012 R2 RTM on Server2012 R2 RTM with SQL2012 SP1
installed SQL, WSUS and then CM.
When finished adding WSUS, there was a post installation message but I skipped it and continued to CM installation, as suggested on some blogs. WSUS in CM seems to be a real mystery... and there are multiple workarounds and suggestions.
Now my CM is ready to GO. Configured discovery, boundaries. All components appear green OK. My hand shaked when I click on post Deployment message related to WSUS in server manager. So I clicked it. And received: Post Deployment Failed. There is
a path to log file. The error:
Fatal Error: The schema version of the database is from a newer version of WSUS
than currently installed. You must either patch your WSUS server to at least
that version or drop the database. WSUS was installed with SQL DB.
What do you suggest?
Thanks.
Please see full log:
2013-12-01 06:58:24 Postinstall started
2013-12-01 06:58:24 Detected role services: Api, Database, UI, Services
2013-12-01 06:58:24 Start: LoadSettingsFromXml
2013-12-01 06:58:24 Start: GetConfigValue with filename=UpdateServices-Services.xml item=ContentLocal
2013-12-01 06:58:24 Value is true
2013-12-01 06:58:24 End: GetConfigValue
2013-12-01 06:58:24 Start: GetConfigValue with filename=UpdateServices-Services.xml item=ContentDirectory
2013-12-01 06:58:24 Value is D:\sources\wsus
2013-12-01 06:58:24 End: GetConfigValue
2013-12-01 06:58:24 Content directory is D:\sources\wsus
2013-12-01 06:58:24 Start: GetConfigValue with filename=UpdateServices-DB.xml item=InstanceName
2013-12-01 06:58:24 Value is confman
2013-12-01 06:58:24 End: GetConfigValue
2013-12-01 06:58:24 SQL instance name is confman
2013-12-01 06:58:24 End: LoadSettingsFromXml
Post install is starting
2013-12-01 06:58:24 Start: Run
2013-12-01 06:58:24 Fetching WsusAdministratorsSid from registry store
2013-12-01 06:58:24 Value is S-1-5-21-1033354796-2088831985-1429053453-1003
2013-12-01 06:58:24 Fetching WsusReportersSid from registry store
2013-12-01 06:58:24 Value is S-1-5-21-1033354796-2088831985-1429053453-1004
2013-12-01 06:58:25 Configuring content directory...
2013-12-01 06:58:25 Configuring groups...
2013-12-01 06:58:26 Starting group configuration for WSUS Administrators...
2013-12-01 06:58:26 Found group in regsitry, attempting to use it...
2013-12-01 06:58:28 Writing group to registry...
2013-12-01 06:58:28 Finished group creation
2013-12-01 06:58:28 Starting group configuration for WSUS Reporters...
2013-12-01 06:58:28 Found group in regsitry, attempting to use it...
2013-12-01 06:58:28 Writing group to registry...
2013-12-01 06:58:28 Finished group creation
2013-12-01 06:58:28 Configuring permissions...
2013-12-01 06:58:28 Fetching content directory...
2013-12-01 06:58:28 Fetching ContentDir from registry store
2013-12-01 06:58:28 Value is D:\sources\wsus
2013-12-01 06:58:28 Fetching group SIDs...
2013-12-01 06:58:28 Fetching WsusAdministratorsSid from registry store
2013-12-01 06:58:28 Value is S-1-5-21-1033354796-2088831985-1429053453-1003
2013-12-01 06:58:28 Fetching WsusReportersSid from registry store
2013-12-01 06:58:28 Value is S-1-5-21-1033354796-2088831985-1429053453-1004
2013-12-01 06:58:28 Creating group principals...
2013-12-01 06:58:28 Granting directory permissions...
2013-12-01 06:58:28 Granting permissions on content directory...
2013-12-01 06:58:29 Granting registry permissions...
2013-12-01 06:58:29 Granting registry permissions...
2013-12-01 06:58:29 Granting registry permissions...
2013-12-01 06:58:29 Configuring shares...
2013-12-01 06:58:29 Configuring network shares...
2013-12-01 06:58:29 Fetching content directory...
2013-12-01 06:58:29 Fetching ContentDir from registry store
2013-12-01 06:58:29 Value is D:\sources\wsus
2013-12-01 06:58:29 Fetching WSUS admin SID...
2013-12-01 06:58:29 Fetching WsusAdministratorsSid from registry store
2013-12-01 06:58:29 Value is S-1-5-21-1033354796-2088831985-1429053453-1003
2013-12-01 06:58:29 Content directory is local, creating content shares...
2013-12-01 06:58:29 Creating share "UpdateServicesPackages" with path "D:\sources\wsus\UpdateServicesPackages" and description "A network share to be used by client systems for collecting all software packages (usually applications)
published on this WSUS system."
2013-12-01 06:58:29 Deleting existing share...
2013-12-01 06:58:29 Creating share...
2013-12-01 06:58:29 Share successfully created
2013-12-01 06:58:29 Creating share "WsusContent" with path "D:\sources\wsus\WsusContent" and description "A network share to be used by Local Publishing to place published content on this WSUS system."
2013-12-01 06:58:29 Deleting existing share...
2013-12-01 06:58:29 Creating share...
2013-12-01 06:58:29 Share successfully created
2013-12-01 06:58:29 Creating share "WSUSTemp" with path "C:\Program Files\Update Services\LogFiles\WSUSTemp" and description "A network share used by Local Publishing from a Remote WSUS Console Instance."
2013-12-01 06:58:29 Deleting existing share...
2013-12-01 06:58:29 Creating share...
2013-12-01 06:58:29 Share successfully created
2013-12-01 06:58:29 Finished creating content shares
2013-12-01 06:58:29 Stopping service WSUSService
2013-12-01 06:58:29 Stopping service W3SVC
2013-12-01 06:58:32 Configuring database...
2013-12-01 06:58:32 Configuring the database...
2013-12-01 06:58:32 Establishing DB connection...
2013-12-01 06:58:32 Checking to see if database exists...
2013-12-01 06:58:32 Database exists
2013-12-01 06:58:32 Switching database to single user mode...
2013-12-01 06:58:32 Loading install type query...
2013-12-01 06:58:32 DECLARE @currentDBVersion       int
DECLARE @scriptMajorVersion     int = (9600)
DECLARE @scriptMinorVersion     int = (16384)
DECLARE @databaseMajorVersion   int
DECLARE @databaseMinorVersion   int
DECLARE @databaseBuildNumber    nvarchar(10)
IF NOT EXISTS(SELECT * FROM sys.databases WHERE name='SUSDB')
BEGIN
    SELECT 1
END
ELSE
BEGIN
    SET @currentDBVersion = (SELECT SchemaVersion FROM SUSDB.dbo.tbSchemaVersion WHERE ComponentName = 'CoreDB')
    SET @databaseBuildNumber = (SELECT BuildNumber FROM SUSDB.dbo.tbSchemaVersion WHERE ComponentName = 'CoreDB')
    DECLARE @delimiterPosition INT = CHARINDEX('.', @databaseBuildNumber)
    IF (@delimiterPosition = 0)
    BEGIN
        RAISERROR('Invalid schema version number', 16, 1) with nowait
        return
    END
    SET @databaseMajorVersion = SUBSTRING(@databaseBuildNumber, 1, @delimiterPosition - 1)
    SET @databaseMinorVersion = SUBSTRING(@databaseBuildNumber, (@delimiterPosition + 1), (10 - @delimiterPosition))
    IF @currentDBVersion < 926
    BEGIN
        SELECT 3
    END
    ELSE
    BEGIN
        IF (@scriptMajorVersion > @databaseMajorVersion OR
           (@scriptMajorVersion = @databaseMajorVersion AND @scriptMinorVersion > @databaseMinorVersion))
        BEGIN
            SELECT 2
        END
        ELSE IF (@scriptMajorVersion = @databaseMajorVersion AND
                 @scriptMinorVersion = @databaseMinorVersion)
        BEGIN
            SELECT 0
        END
        ELSE
        BEGIN
            SELECT 4
        END
    END
END
2013-12-01 06:58:33 Install type is: UnsupportedFuture
2013-12-01 06:58:33 DB is a higher version than the config scripts
2013-12-01 06:58:33 Swtching DB to multi-user mode......
2013-12-01 06:58:33 Finished setting multi-user mode
2013-12-01 06:58:33 Microsoft.UpdateServices.Administration.CommandException: The schema version of the database is from a newer version of WSUS
than currently installed. You must either patch your WSUS server to at least
that version or drop the database.
   at Microsoft.UpdateServices.Administration.ConfigureDB.CheckForUnsupportedVersion(DBInstallType installType, Boolean dbExists)
   at Microsoft.UpdateServices.Administration.ConfigureDB.ConnectToDB()
   at Microsoft.UpdateServices.Administration.ConfigureDB.Configure()
   at Microsoft.UpdateServices.Administration.PostInstall.Run()
   at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
Fatal Error: The schema version of the database is from a newer version of WSUS
than currently installed. You must either patch your WSUS server to at least
that version or drop the database.
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

Gerry,
1. I uninstalled WSUS, removed DB, restarted. And reinstall WSUS again. This time MS Management Console of WSUS could not be started. I did it after WSUS was added following your blog pix.
I checked c:\program files\update services, there were couple of missing directories by comparison what was in case when I installed WSUS after SQL but before CM: Tools, Shema, and another A.. something. I saw this issue on NOOB. And people copied these
directories from previous installation.
How we can explain this behavior on RTM version?
Then I uninstalled it again. And give another try... Here I found another interesting thing. Please compare your slide number 5 from your link and attached one. You can see that on Add Roles and Features Wizard page are missing items. Some
of them were found in next screen of my installation (I am using RTM server) but one API and Power shell cmdlets were not listed on final screen before start install. May be those are note important...
I reinstall again... and the MS Management Console fails again. Exactly the same thing that I saw during 2 weeks of trying to make works. Don't see what I can screw up here.
What about missing directories after reinstalling WSUS. Is that normal? And in IIS there is no WSUS.
I don't see here any difficult thing, just simple wizard... But it not works. Second CM server.
What I do wrong here to create a failure of MMC. There is any blog with examples of RTM Server 2012 and CM RTM. All stuff is 2012. So kind of guesses and no precise thing to do...
Sorry for my cry :). The only solution is to call MS and pay $250 for SUCH a trivial thing that not works.
Any help? Please see pics. Can you confirm that you have the same or more directories in Update Services
Thanks.
API and Power Shell Cmdlets feature missed if compare with yours slides.
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

Maximum volume of data supported by the version of the database embedded

Hi,
How to know the maximum volume of data supported by the version of the database embedded??
Any help will be needful for me
Thanks and Regards

* 1 EB = 1,000,000,000,000,000,000 B = 1 billion gigabytes
The term exbibyte, using a binary prefix, is used for powers of 1024 bytes.
Source: http://en.wikipedia.org/wiki/Exabyte
Regards
Asif Kabir
-- Mark the answer as correct/helpful

Knowing the exact version of the Database

i am having a hard time knowing the version of the attached database on my server.. Lets says someone created a database using sql
server version xxxx and he created a backup of that DB then he gave me. how do i find the database version then. Thanks.

>>i am having a hard time knowing the version of the attached database on my server.
USE DBNAME
GO
DBCC DBINFO() WITH TABLERESULTS
You can refer the
--dbi_version - New Version of the database
--dbi_createVersion -- The old version of the database
Just compare the output of dbi_createversion with below list to find the source database version.
http://sqlserverbuilds.blogspot.com/2014/01/sql-server-internal-database-versions.html
SQL Server Version
Internal Database Version
Database Compatibility Level
SQL Server 2014
782
120
SQL Server 2012
706
110
SQL Server 2012 CTP1
(a.k.a. SQL Server 2011 Denali)
684
110
SQL Server 2008 R2
660 / 661
100
SQL Server 2008
655
100
SQL Server 2005 SP2+
with VarDecimal enabled
612
90
SQL Server 2005
611
90
SQL Server 2000
539
80
SQL Server 7.0
515
70
SQL Server 6.5
408
65
SQL Server 6.0
60
--Prashanth

What are the version of the database?

Hi Guru's
What are the versions of the database which is comes with e-business suit?
11.5.10.2 9.2.0.6
11.5.10
11.5.9
11.5.8
Please give me the reply
Thanks

What are the versions of the database which is comes with e-business suit?11.5.10.2 --> 9.2.0.6
11.5.10 --> 9.2.0.5
11.5.9 --> 9.2.0.3
11.5.8 --> 8.1.7.4

OWB Paris: Recommend version of the Database

Hello everybody.
I would like to know which version of the database is recomended to be used with OWB Paris. We want to use the module of this tool that allows to audit the data quality and we don't know if it's necessary to install an specific version of the database (10gR2) or it can be used with 9i.
Thanks in advance

What versions of Oracle database can I use with OWB 10gR2 Beta 3?
- Oracle Database 10gR2
- Oracle Database 10gR1 with 10.1.0.4 patchset applied.
- Oracle9i Database (9.2). Note that some OWB features are only supported on Oracle Database 10g, as detailed in the Release Notes. Oracle Database 10gR1 is strongly recommended for OWB Paris Beta.
Bye
Detlef

This version of the imaging eninge cannot read this image

I am trying to read an image that I created in April 2009. I used it in August 2009. An now I am receiving the error - This version of the imaging engine cannot read this image.
I have recently upgraded the image engine to v7.0.1.7 and threw out old copies of boot disk, etc. Is my problem that it was written with an older version (no earlier than 6.5)? Or is it something else?

ABissman,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

How can we know version of the database ?

Hi all,
How can we know the version of the under lying database ? Please share your ideas.
Thanks

Hi,
Choose System->Status Menu item to open the status window.
You can see the DB data in the Bottom right.
Regards
Karthik D

Importing New Version of the database

Hello. I don't know if this is the right forum for this question but, we are trying to update our test finanical database by importing a copy from our live finanical database that was exported. We log into SVRMGR as SYSTEM/MANAGER and try to start the import, but we can't get the PO, GL objects to drop. We can get the system objects to drop. When we log in as APPS/APPS, the apps objects drop, but we still can't get the other objects to drop.
Do we have to log into each Oracle Financial object (i.e. PO, GL, etc) in order to drop them so we can import updated data? Or are we missing a command or part of a command when we log into SRVMGR in our to have full access to all the database objects? Our system in Oracle 8.0.5 running on Windows NT server. Thanks for your assistance.
David Correia
MIS
NECMSC

Were covariant return types removed from the compiler? I tried compiling this code:
import java.lang.reflect.*;
class Base implements Cloneable {
    public Base clone() { return null; }
class Derived extends Base {
    public Derived clone() { return null; }
public class Generic {
    public static void main(String[] args) throws Exception {
        Method m = Derived.class.getDeclaredMethod("clone", new Class[] { });
        System.out.println(m.getReturnType());
}And got these errors:
Generic.java:4: clone() in Base cannot override clone() in java.lang.Object; att
empting to use incompatible return type
found : Base
required: java.lang.Object
public Base clone() { return null; }
^
Generic.java:8: clone() in Derived cannot override clone() in Base; attempting t
o use incompatible return type
found : Derived
required: Base
public Derived clone() { return null; }
^
2 errors
I think this same program compiled without error with the first version of the generic compiler.

When using the Database Connectivity Toolset, reads and writes with long binary fields are incompatible.

I am trying to write LabVIEW Variants to long binary fields in a .mdb file using the Database Connectivity Toolset. I get errors when trying to convert the field back to a variant after reading it back from the database.
I next tried flattening the variant before writing it and ultimately wound up doing the following experiments:
1) If I use DB Tools Insert Data to write an ordinary string and read it back using a DB Tools Select Data, the string is converted from ASCII to Unicode.
2) If I use DB Tools Create Parameterized Query to do an INSERT INTO or an UPDATE operation, specifying that the data is BINARY, then read it back using a DB Tools Select Data,
the length of the string is prepended to the string itself as a big-endian four-byte integer.
I can't think of any way to do a parameterized read, although the mechanism exists to return data via parameters.
Presuming that this same problem affects Variants when they are written to the database and read back, I could see why I get an error. At least with flattened strings I have the option of discarding the length bytes from the beginning of the string.
Am I missing something here?

David,
You've missed the point. When a data item is flattened to a string, the first four bytes of the string are expected to be the total length of the string in big-endian binary format. What is happening here is that preceding this four-byte length code is another copy of the same four bytes. If an ordinary string, "abcdefg" is used in place of the flattened data item, it will come back as <00><00><00><07>abcdefg. Here I've used to represent a byte in hexadecimal notation. This problem has nothing to do with flattening and unflattening data items. It has only to do with the data channel consisting of writing to and reading from the database.
I am attaching three files that you can use to demonstrate the problem. The VI file c
ontains an explanation of the problem and instructions for installing and operating the demonstration.
Ron Martin
Attachments:
TestLongBinaryFields.vi ‏132 KB
Sample.UDL ‏1 KB
Sample.mdb ‏120 KB

Minimum version of the database that can be directly upgrade into 11G2

Dear DBA's,
Where can I find a document from Oracle showing/proving I can upgrade directly from 9.2.0.6 intoi 11.2.0.1?
Txs for your help
Rgds
Carlos

okKarol wrote:
Dear DBA's,
Where can I find a document from Oracle showing/proving I can upgrade directly from 9.2.0.6 intoi 11.2.0.1?
Txs for your help
Rgds
CarlosIn the 11.2 Upgrade Guide, found at http://download.oracle.com/docs/cd/E11882_01/server.112/e10819/preup.htm#i1007814
Or simply go to tahiti.oracle.com, where you will find all of oracle's doc libraries. Drill down to your product and version. The you will find the complete doc set for that product/version, including installation and/or upgrade guides.

SQL Server 2012 Management Studio:In the Database, how to print out or export the old 3 dbo Tables that were created manually and they have a relationship for 1 Parent table and 2 Child tables?How to handle this relationship in creating a new XML Schema?

Hi all,
Long time ago, I manually created a Database (APGriMMRP) and 3 Tables (dbo.Table_1_XYcoordinates, dbo.Table_2_Soil, and dbo.Table_3_Water) in my SQL Server 2012 Management Studio (SSMS2012). The dbo.Table_1_XYcoordinates has the following columns: file_id,
Pt_ID, X, Y, Z, sample_id, Boring. The dbo.Table_2_Soil has the following columns: Boring, sample_date, sample_id, Unit, Arsenic, Chromium, Lead. The dbo.Table_3_Water has the following columns: Boring, sample_date, sample_id, Unit, Benzene, Ethylbenzene,
Pyrene. The dbo.Table_1_XYcoordinates is a Parent Table. The dbo.Table_2_Soil and the dbo.Table_3_Water are 2 Child Tables. The sample_id is key link for the relationship between the Parent Table and the Child Tables.
Problem #1) How can I print out or export these 3 dbo Tables?
Problem #2) If I right-click on the dbo Table, I see "Start PowerShell" and click on it. I get the following error messages: Warning: Failed to load the 'SQLAS' extension: An exception occurred in SMO while trying to manage a service.
--> Failed to retrieve data for this request. --> Invalid class. Warning: Could not obtain SQL Server Service information. An attemp to connect to WMI on 'NAB-WK-02657306' failed with the following error: An exception occurred in SMO while trying
to manage a service. --> Failed to retrieve data for this request. --> Invalid class. .... PS SQLSERVER:\SQL\NAB-WK-02657306\SQLEXPRESS\Databases\APGriMMRP\Table_1_XYcoordinates>   What causes this set of error messages? How can
I get this problem fixed in my PC that is an end user of the Windows 7 LAN System? Note: I don't have the regular version of Microsoft Visual Studio 2012 in my PC. I just have the Microsoft 2012 Shell (Integrated) program in my PC.
Problem #3: I plan to create an XML Schema Collection in the "APGriMMRP" database for the Parent Table and the Child Tables. How can I handle the relationship between the Parent Table and the Child Table in the XML Schema Collection?
Problem #4: I plan to extract some results/data from the Parent Table and the Child Table by using XQuery. What kind of JOIN (Left or Right JOIN) should I use in the XQuerying?
Please kindly help, answer my questions, and advise me how to resolve these 4 problems.
Thanks in advance,
Scott Chang

In the future, I would recommend you to post your questions one by one, and to the appropriate forum. Of your questions it is really only #3 that fits into this forum. (And that is the one I will not answer, because I have worked very little with XSD.)
1) Not sure what you mean with "print" or "export", but when you right-click a database, you can select Tasks from the context menu and in this submenu you find "Export data".
2) I don't know why you get that error, but any particular reason you want to run PowerShell?
4) If you have tables, you query them with SQL, not XQuery. XQuery is when you query XML documents, but left and right joins are SQL things. There are no joins in XQuery.
As for left/right join, notice that these two are equivalent:
SELECT ...
FROM   a LEFT JOIN b ON a.col = b.col
SELECT ...
FROM   b RIGHT JOIN a ON a.col = b.col
But please never use RIGHT JOIN - it gives me a headache!
There is nothing that says that you should use any of the other. In fact, if you are returning rows from parent and child, I would expect an inner join, unless you want to cater for parents without children.
Here is an example where you can study the different join types and how they behave:
CREATE TABLE apple (a int    NOT NULL PRIMARY KEY,
b varchar(23) NOT NULL)
INSERT apple(a, b)
   VALUES(1, 'Granny Smith'),
   (2, 'Gloster'),
   (4, 'Ingrid-Marie'),
   (5, 'Milenga')
CREATE TABLE orange(c int NOT NULL PRIMARY KEY,
d varchar(23) NOT NULL)
INSERT orange(c, d)
   VALUES(1, 'Agent'),
   (3, 'Netherlands'),
   (4, 'Revolution')
SELECT a, b, c, d
FROM   apple
CROSS JOIN orange
SELECT a, b, c, d
FROM   apple
INNER JOIN orange ON apple.a = orange.c
SELECT a, b, c, d
FROM   apple
LEFT   OUTER JOIN orange ON apple.a = orange.c
SELECT a, b, c, d
FROM   apple
RIGHT OUTER JOIN orange ON apple.a = orange.c
SELECT a, b, c, d
FROM   apple
FULL OUTER JOIN orange ON apple.a = orange.c
go
DROP TABLE apple, orange
Erland Sommarskog, SQL Server MVP, [email protected]

I have boolean type of value in the database, how to get it as true or fals

Hi friends,
I have login page in that only admin can access next page after login. First my problem is only admin must be logged in, so i have used one column named admin, which is nothing but it is BIT type of column. So if it is true then it must allow the admin, otherwise if it is false then it must not redirect to that page. So how can i get that column value whether it is true or false. I have used this method to get the value.
boolean ok = getBoolean("Admin");// This isnothing but getting column Admin which is of type boolean.
if(ok==true){
return "adminPage";
}Please help me out from this problem. Please give me a suggestion.
Thanking You in Advance.

Hi There,
Normally a database stores the boolean value as a 0 or a 1. you may have to check for that or convert the 0,1 to true or false and then check for it.
Hope it helps
K

E-Business Suite Customisations - which version of the Database can I use?

Hi,
We've made some customisations to the E-Business suite and want to find out what the Oracle official line is on licencing database. We think that making the customisations means that we need more database but could a lower (& cheaper) type of database license be acquired (standard?) to handle the processing for any customs and then, using a link, just load the finished data into the Apps interface, thereby avoiding any customs in the Apps db? If so, can it be on the same server as the Apps?

The best place for such app specific request would be in one of the eBusiness forums.
Nicolas.

How can I find out the database version from an old backupset

Hi,
I have to restore a database using an old backupset (4 years ago) to a new database. My challenge is we don't know what version of the database were used back then. Is there anyway I can find this information. We are using the RMAN catalog.
Or is RMAN restore and recovery can be used to a newer version than the backupset?
Thanks in advance.
Regards,
Sosan Fong

Thanks for the reply and suggestion.
We are using its own software for all databases hosted in the server. So I need to cleanup and reinstall after tested in 11g. A little bit more work, but if it works, that's ok. Is there any other suggestions?
Regards,
S

Dbsql version of the database how to read noSQL

Similar Messages

Maybe you are looking for