DCNM v5.2(2),S104 Discovery for 6500s Very Slow

It's been discovering a 6513 for over 90 minutes. Is this an expected duration or is something likely malfunctioning or is it just the sheer # of interfaces that it must process? The Nexus 5k's that it has discovered progressed fairly quickly.

As far as I know, this is not normal.
Suggest to take a look in the DCNM-LAN server log file :
C:\Program Files (x86)\Cisco Systems\dcm\jboss-4.2.2.GA\server\dcnm\log\server.log
If no extra information in the log file, I would open a TAC case.
Paul

Similar Messages

Screen refresh for participants very slow on beehive web conference

When I am sharing my desktop with participant on Beehive web conference, the screen refresh is very slow for the participants. It almost takes 1 minute for the screen to refresh on the participants screen. I am on Windows 7.
Appreciate your help.
Thanks in advance.

Hi,
Given we have very little control over the network bandwidth of the end user it is difficult to determine what the problem could be - normally the refresh is reasonably fast but if there are a lot of users or a restricted bandwidth it can show down a bit.
One trick to aid the display is to not move the mouse around the screen - pointing to the entities on the page will increase the amount of information being sent. If you can click one and wait for the screen to be rendered at the other end before continuing it may be a bit quicker.
Phil

How to identify reasons for a very slow transaction?

Hi All,
If I see that a SAP standard transaction is very slow for every user, what are the areas that I will have to look to get it resolved.
All other transactions work quick and only one transaction is very sluggish. How to find the root cause and resolve this?
Thanks
Vijay

Hi,
I have used Tx Code SGEN to reduce the time to open every Transaction. As opening every transaction require the compilation of some programs, reports etc, which takes a lot of time.
This transaction S creen GEN erator, will load(compiled version of ) all the frequently used transactions into the database. Database size will be increased by 2 GB or more.
Refer this link for more details :
http://help.sap.com/saphelp_nw70/helpdata/EN/28/52583c65399965e10000000a114084/frameset.htm
I hope this will help you.
Best Regards,
Pradeep Bishnoi
Edited by: Pradeep Bishnoi on Dec 31, 2008 1:32 PM

Toad for Oracle very slow

HI,, we've toad 8 for oracle and our DB is 9i . The connection from toad to db is very slow . We've another test instance db g but the connection from toad is faster.
So what to check ???
Regards,,

HI,, we've toad 8 for oracle and our DB is 9i . The connection from toad to db is very slow . We've another test instance db g but the connection from toad is faster.
So what to check ???When you compare with two databases, Is the network connectivity Os resources are in same levels in two servers?
You having issues in connecting of Response time, or it hangs some time in SQLPLUS prompt?

Save for web very slow

I have a new MBP Retina, clean install of the OS and Creative Cloud. Just setting up Photoshop, and Save For Web is extremely slow. It opens normally, but I get the spinning color cursor for 15-20 seconds and only after that does the image display in the preview window. Then for every checkbox I select, the color cursor comes back and all is delayed for another 15 seconds. The file is a square photo from an iPhone 5s, two layers, nothing else going on, 34mb.
I do have Suitcase Fusion 6 installed. Based on their instructions, I removed all fonts from the HD/library/fonts, and have certain web faces activated through Suitcase. (Arial, Courier, Georgia, Times, Trebuchet, Verdana).
On a new, empty file, all works as expected with no delays.
I had this same set up on this same Mac before I wiped the hd, and never had this problem.
Any thoughts...reset a preference or...?
Thank you.

I just noticed the above unresponsiveness happens with the 4.7mb exported PNG, so it's not related to the file size.

Fix for a very slow browser

Hello All,
I hope this helps.
Here's my problem. My browser, when wireless, had slowed down dramatically. Loading pages took forever. I tried it at home and the office and both were slow.
When I plugged it directly into the Ethernet it was blazingly fast. Made me want to cry
I tried many of the things suggested here including clearing cache etc.
Here's what worked for me. Corrupt network config file I guess.
System Preferences
Network
Location tab click to "New Location"
Name it Apple (or anything you like)
Click Apply
See if that works for you. Fixed 2 weeks of frustration for me!

Thanks for posting this Justin. I'm sure it will help others wondering what happened to their browser speed,
Also, consider adding 4.2.2.2 to your Network>Airport>TCP> DNS servers box, selecting "apply". This too may help in the speed department.

Request for Help - Very slow and programs crash, etc. since upgrading to Lion

I have searched the forum for a while looking for answers, but everyone seems to have different issues.
Since upgrading to Lion last week, EVERYTHING is running slow. I have an iMac (late 2009) with 4GB ram and over 700GB of free hard drive space.
I am not running a ton of heavy duty programs -- just the basics - word, entourage, safari, preview, and occasionally Photoshop, iPhoto, etc. I haven't even tried to edit any video since upgrading.
I continually get the "spinning wheel" when doing the most simple tasks like deleting a mail message, or opening a pdf file.
I have done all software updates.
Any help is greatly appreciated!
Thanks,
Kim

Entourage & Photoshop are both serious memory hogs. Export your data to Mail, Addressbook and iCal*:
http://www.macmaps.com/entouragemigration.html
Next for Photoshop, make sure to follow tips on the http://roaringapps.com/apps:table website for your version of Photoshop, to ensure you aren't overtaxing your system, and that you are usign any applications that are current for Lion. If you have any WiFi routers, make sure WPA2 password protection is on, and not WEP, and not an open network, and that their firmware has been tested with Lion. Lastly, speed issues may be due to website design. Try different browsers*: http://www.macmaps.com/browser.html

Bridge for mac - Very slow connect after installing sd card

Hey guys,
after I installed a 32gb SD card, the connection-procedure is really slow. The green bar fills in not 10sec but in 2 minutes now. What happened? Really the SD card? What can I do?
Thanks!

Hey guys,
I had to move the XperiaTransfer-Folder to my SD-card. Now, after I moved it, the date of 70% of the photos is the current date and nearly 900 images are dated for today. It's quite hard to navigate through the images now. How does the Sony Gallery app gather information? What can I do to fix it?
Thanks

Needed: Optimization tips from a Pro for a very slow internet connection

I am on a remote base in Iraq with about 150 people sharing a satellite connection with a 2MB pipe. It is slow. There is nothing I can do about the volume of people, QoS from the provider, and there is no competition.
Given that, I would like to know what I can tune on my machine to make the most of a slow, frustrating experience.
I have noticed although I have browser caching turned on, it appears my browsers (safari, Omni, FF) don't try t take advantage of it. They still spend 10 minutes trying to get in touch with the website and start from scratch. Is there a browser that visits it's cache first and then looks for changes? Are there settings I am overlooking that can force the browser to load from cache first and then look for differences? Are there command line parameters or configuration files I can edit and modify to make a difference for the better?
I also have a buddy running linux and he installed a DNS caching mechanism that reduced his repeat lookups from 5 seconds to 0. He also installed another website data caching mechanism that truly stores the pages of websites he frequently visits. His experience was enhanced tremendously.
What do you recommend I do from the command line and within my browsers to maximize facilities like caching to make a slow situation a little better?
I apprecite your time and advice
Dan
US Army (AIRBORNE)
Mesopotamia, Iraq

Hi Sahar,
1) To post your adsl line statistics you can be connected to the home hub or router via wireless.
Below is some information on how to obtain your adsl line stats. You can also see this link here ADSL Statistics
ADSL Line Statistic Help:
If you have a BT Home Hub like the one below...
Then:
1) Go to http://192.168.1.254 or http://bthomehub.home
2) click Settings
3) Click Advanced Settings
4) Click Broadband
5) Click Connection or sometimes called ADSL (see picture Below)
The direct Address is http://bthomehub.home/index.cgi?active_page=9116 (for bthomehub3.A firmware ending in 1.3)
or http://bthomehub.home/index.cgi?active_page=9118 (for bthomehub3.A firmware ending in 94.1.11)
You will need to copy and past all the adsl line statistics ( Including HEC, CRC and FEC errors). You may need to click " More Details"
There are more useful links on Keith's website here: If you have an ADSL connection, please select this link
2) To run and post the results of a BT Wholesale Speed Test it is recommended to do this with a wired ethernet connection, as a WiFi connection can be effected by other electronic devices in your property.
It is also best to have a landline phone of some sort, even if you don't use it, at is is a very handy tool to test your landline for any noise.
As any noise on your landline can dramatically reduce your broadband performance.
You can get a cheap corded landline phone from most electronic stores or online.
They are also good in emergencies when there is a power cut as a corded landline phone will still work.
Hope that helps,
Cheers
I'm no expert, so please correct me if I'm wrong

Using a hand held for rdp - very slow performance

My customer is trying to implement a bar code scanning system to improve their inventory management and shipping efficiency. They just built a new warehouse and are in the process of moving in. They have purchased 2 Intermec handheld bar code scanners which
run Windows CE and support an RDP session over wi-fi. We have installed 2 Cisco 1602 wifi access points.
The software that they run is called Chempax. It is an industry specific app written for the chemical industry. The chempax app has a special program that is designed to run on the 4" screen of the handheld device. When the scanner connects to
the terminal server, the session automatically launches that app. Basically, all it does is let the operator scan bar codes to move product from location to location. It would seem to be something that would not require much in the way of computing speed on
the remote end. But we are having major problems implementing this system. The handheld keeps dropping the rdp connection, even when it has a strong wi-fi signal. It will work for a short while and then the screen will just hang for a while and then it will
start working again.
I have tested the app using a laptop and it works great on the laptop, but I have not been able to get it working on the handheld.
Any ideas would be greatly appreciated.
Thanks,
Mike

Hi,
I agree with Bruno. It seems to be a device side issue. I suggest discussing the issue with the vendor. Also, as it runs Windows CE, you can try to post the question in Windows CE forum for
troubleshooting ideas.
http://social.msdn.microsoft.com/Forums/en-US/home?category=windowsembeddedcompact&filter=alltypes&sort=lastpostdesc
Thanks.
Jeremy Wu
TechNet Community Support

Quicktime SDK for Windows very slow processing UNC paths

Hi,
I am using the QuickTime SDK to ingest a file to XDCAM mov reference and storing the output file on a network drive using a UNC path.
My call to QTNewDataReferenceFromFullPathCFString(...) is increadably slow in returning (7.5 seconds), so much so that the rest of the system gives up and the ingest fails.
I tried using QTNewDataReferenceFromCFURL(...) but this didn't make any difference.
If I map the network drive the call to QTNewDataReferenceFromFullPathCFString(...) is very quick and the ingest completes without issue.
I am using QuickTime SDK version 7.3, QuickTime player version 7.7.3 and Windows Server 2008 R2.
Is this a known problem with QuickTime?
Thanks for your help.

GarrySarre wrote:
I have 32gig of ram with CS5 running on Windows 7 and it never uses a scratch.
Not directly related to your main question, but this statement is flawed. Photoshop ALWAYS opens scratch files. I have 48GB and just opening Photoshop causes scratch files to be created with names like Photoshop Temp208190803952.
I only mention this because if you're not seeing such files created, you may not have your Scratch preferences or permissions set right.
Can you screenshot your Edit - Preferences - Performance panel, please, and post it here?
And a last note that DOES bear on your Liquify issues: If you're truly using Liquify a lot, you really, REALLY need to look into upgrading to Photoshop CS6. You know they re-wrote it to use the GPU in the new version, right? It's night and day faster.
-Noel

Music Selection for iPhone 4 in itunes for Sync very slow

Hi,
I'm using itunes 10.0.1.22.
- itunes Database is stored on a NAS (~12.000 files / ~170GB)
- access via WLAN
- itunes is synced with 2 iPods and 1 iphone 4
For every device, I have to select music-files for syncing due to the restricted storage.
For ipods it goes smoothly by clicking every checkbox (Album, Title, Artist...) I like and sync.
When I try to select music for my iphone, I always have to wait at least 1 minute after clicking ONE checkbox. Syncing goes quick as usual.
Deleting Sync-Progress did not help. In addition to that, I removed all the music on iphone (by disabling music option) and started a new selection. But this didn't work too.
Does anyboy have a similar problem/issue? Is there a solution or a recommondation?
If you know another topic in discussion that will solve my problem, please post the link.
thx, ndee

I am having the same problem. Only difference is that my iTunes library is stored on an external USB drive. I think the problem must be related to the library not located on the local itunes drive. I noticed that everytime I select a check-box, the external drive 'activity light' starts blinking like mad. And only when it stops does iTunes start responding again.
Did you get an answer or anything on this? It's driving me mad!

Why is preview for photos running slow in Mavericks?

After upgrading to Mavericks Preview for photos very slow.
What can I do?

Make sure there's enough free space on the disk..
Click your Apple menu  top left in your screen. From the drop down menu click About This Mac > More Info > Storage
Make sure there's at least 15% free disk space.

RME 4.3, Inventory Collection doesn't work for 6500

I have a issue with Inventory collection for 6500 devices running IOS 12.2.33 SXI1, fails with a message, "device collection failed"
From IC_Server log i could see SNMP Request timeout exception, so increased SNMP timeout to 10 under device attributes for the device but still it fails.
attacehd is the extract from IC_Server log.
Could anybody help me on this? Thanks

You have not increased the timeout properly. You need to go to RME > Devices > Device Management > RME Devices, and edit the attributes for the required device. Select the device from the list in the left-hand pane to pre-populate the current attributes. Then increase the SNMP timeout to 10, and save the changes. On the previous screen, you will need to APPLY those changes before the 10 second timeout will take effect.

Car kit for 6500 from 6230i

I have the now old cark 126 great holds and charges the phone even has an arial. It seems what ever I do now with my new phone is a backward step. I am begining to think I should have kept my 6230i instead of changing to the 6500c.
I hope one of you can help with the following issues.
1 Which hands free kit should I use?
2 Is there a cradle available?
3 What about charging the phone ?
4 arial ?

The only option you have is to change your car kit, Nokia only do bluetooth car kits for 6500 classic. Look at Nokia ck-15w or ck-7w, your phone will work with other brands of bluetooth kits like Parrot or THB Bury.
Danny B
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.

DCNM v5.2(2),S104 Discovery for 6500s Very Slow

Similar Messages

Maybe you are looking for