DDNS configuration
Hi Everybody,
Can anyone provide the step-by-step procedure for configuring the Dynamic DNS server on the solaris 10.
or provide the gud websites.
Thanks Inadvance,
Yogendra.
I couldn't agree more. They've released this model way back 2009 and if there was a firmware update it should be released 4 years ago. The best option would be to upgrade to the much newer model with much more advance features.
Help, learn and share
Similar Messages
-
DDNS configuration no more free hosting
Hello,
my router gateway WAG320N is configured with dyndns.org and working fine, but in 30 days the free account on Dyndns.org provider will be no longer "free" (i received an email from dyn.org)
My question is: there is any alternative to setup in DDNS page in router configuration any other free provider?
note that the two available choise are "Dyndns.org" and "TZO.com" acquired from dyn also
thanks in advance for any helpI couldn't agree more. They've released this model way back 2009 and if there was a firmware update it should be released 4 years ago. The best option would be to upgrade to the much newer model with much more advance features.
Help, learn and share -
DDNS adding router name in the hostname
Having trouble with DDNS and DynDNS.org it keeps adding my router name in front of my hostname???
I used 0 0 5 0 for debugging.
Here is what the log says
000234: Jul 24 14:43:24.695 PCTime: DYNDNSUPD: Adding DNS mapping for ZOMBIE_DEFENCE_R1.hidden.dyndns.org <=> xx.xxx.xxx.xxx
000235: Jul 24 14:43:24.695 PCTime: HTTPDNS: Update add called for ZOMBIE_DEFENCE_R1.hidden.dyndns.org <=> xx.xxx.xxx.xxx
000236: Jul 24 14:43:24.695 PCTime: HTTPDNSUPD: Session ID = 0x15
000237: Jul 24 14:43:24.695 PCTime: HTTPDNSUPD: URL = 'http://USERHIDDEN:[email protected]/nic/update?system=dyndns&hostname=ZOMBIE_DEFENCE_R1.hidden.dyndns.org&[email protected]/nic/update?system=dyndns&hostname=ZOMBIE_DEFENCE_R1.hidden.dyndns.org&myip=xx.xxx.xxx.xxx'
000238: Jul 24 14:43:24.695 PCTime: HTTPDNSUPD: Sending request
000239: Jul 24 14:43:25.095 PCTime: HTTPDNSUPD: Response for update ZOMBIE_DEFENCE_R1.hidden.dyndns.org <=> xx.xxx.xxx.xxx
000240: Jul 24 14:43:25.095 PCTime: HTTPDNSUPD: DATA START
nohost
000241: Jul 24 14:43:25.095 PCTime: HTTPDNSUPD: DATA END, Status is Response data recieved, successfully
000242: Jul 24 14:43:25.095 PCTime: HTTPDNSUPD: Call returned SUCCESS, update of ZOMBIE_DEFENCE_R1.hidden.dyndns.org <=> xx.xxx.xxx.xxx succeeded
000243: Jul 24 14:43:25.095 PCTime: DYNDNSUPD: Another update completed (outstanding=0, total=0)
000244: Jul 24 14:43:25.095 PCTime: HTTPDNSUPD: Clearing all session 21 info
Here are my config options
ip domain name hidden.dyndns.org
ip name-server 8.8.8.8
ip name-server 8.8.4.4
ip ddns update method DynDNS
HTTP
add http://hidden:[email protected]/nic/update?system=dyndns&hostname=hidden.dyndns.org&[email protected]/nic/update?system=dyndns&hostname=hidden.dyndns.org&myip=<a>
remove http://hidden:[email protected]/nic/update?system=dyndns&hostname=hidden.dyndns.org&[email protected]/nic/update?system=dyndns&hostname=hidden.dyndns.org&myip=<a>
interval maximum 0 0 5 0
interface FastEthernet4
description WAN SIDE
ip ddns update hostname hidden.dyndns.org
ip ddns update DynDNS host hidden.dyndns.orgHi Kris,
Mine works, but our syntax is different. I used CCA on a UC500 to configure the following resulting ddns configuration
home#sh run | b ddnsip ddns update method sdm_ddns1 HTTP add http://fred:[email protected]/nic/update?system=dyndns&hostname=[email protected]/nic/update?system=dyndns&hostname=&myip= remove http://fred:[email protected]/nic/update?system=dyndns&hostname=[email protected]/nic/update?system=dyndns&hostname=&myip= interval maximum 2 0 0 0 interval minimum 1 0 0 0
interface FastEthernet0/0
description $FW_OUTSIDE$
bandwidth 982
ip dhcp client update dns server none
ip ddns update hostname nivada.homeip.net
ip ddns update sdm_ddns1
ip address dhcp client-id FastEthernet0/0 -
While trying to change a DDNS identity on a clients WRV54G the status always appeared as DDNS is Disabled, indicating that the router was not communicating with the DDNS server.
I found that if the router had an existing configuration, DDNS could not be changed.
Fix was to reset router to Factory Settings and configure DDNS as first step. When saved , Status came up as DDNS is Enabled - working OK.
All other settings were restored manually.
BobManHere's how I fixed this.
1 - Using "Config Management" download the current configuration to a CNF file.
2 - Make a copy of the CNF file and rename it.
3 - Edit the CNF file in NOTEPAD
4 - Search for dyndns, the section looks like this:
(ddns
(status(0))
(provider(dyndns.org))
(response( - IP updated successfully))
(last_update(1206754254))
(enabled(1))
(username(yourdyndnsuserid))
(password(&c6;Ub&c3;&ab;&19;a&cf; ))
(hostname(yourhostnamed.homeip.net))
(wildcard(0))
(offline(0))
(device(ixp1))
(last_ip(x.x.x.x))
5 - Erase all the lines between the line that starts "(ddns" and the line with a single " ) "
6- Paste the default dyndns config as shown below...
(ddns
(status(1))
(provider(dyndns.org))
(response())
(last_update(0))
7 - Save the CNF file.
8 - Using "Config Management" upload edited CNF file
9 - When the router reboots, the DDNS configuration will be blank. You can setup DYNDNS (et al).
HERE'S THE REALLY IMPORTANT PART
10 - Using "Config Management" download the repaired configuration to a CNF file. Make several copies. Put at least one on removable media.
Message Edited by IDoNot12B on 03-28-2008 07:12 PM
(Mod Note: Edited due to non-compliance of forum guidelines.)
Message Edited by giantherockstar on 03-28-2008 07:18 PM -
DDNS service on a WRT54GS router
Has anyone been able to user the DDNS service on a WRT54GS router?
Message Edited by sshahir on 12-27-2007 06:16 PMHello oook,
Thank you for your reply.
I have used the auto detect IP address (65.95.79.113) recommended (by LinkSys on the Setup/DDSN tab and dyndsn.com web page) to associate the host name initially prior to configure my router DDSN. In other words, first, I have associated the host name (http://sshahir.dyndns.org) to the recommended auto detect IP address (65.95.79.113), and then, I have successfully been able to configure DDNS on the WRT54GS router (according to the message appears on the Setup/DDSN tab). I believe my router DDNS doesn’t work properly regardless the successful DDNS configuration message because the IP address assigned to the host name hasn’t been changed and updated since then, and I cannot browse the web server located behind the router.
Have you assigned a static IP address to your host name (i.e. hostname.dyndsn.com)? If not, please let me know what IP address you used to associate with the host name prior to configure your router DDSN? Has your router DDSN been able to update the IP address associated with the registered host name? If you have used the same IP address (65.95.79.113) initially, and the DDSN works properly, please let me know the firmware version you are using on your router.
Thank you,
sshahir -
I have an DDNS account at http://www.dyndns.com. I can't seem to locate the DDNS configuration page in the router management module. How do I configure my router to periodically update my IP address to http://www.dyndns.com?
Take a look on this article to help you: DynDNS.com - 2 Easy Ways to Notify the DDNS Servers on IP Change
Hope helps.. -
Hi all: I am seeing many errors in /var/log/messages. Here are a few
Aug 12 20:45:05 GR13 [NCPL]: client 10.1.2.15#53: updating zone 'vrapc.cxm/IN': Unsupported RR(255): discarding
Aug 12 20:45:05 GR13 [NCPL]: client 10.2.2.11#53: updating zone 'vrapc.cxm/IN': Unsupported RR(255): discarding
Aug 12 20:45:05 GR13 [NCPL]: client 10.2.2.12#53: updating zone 'vrapc.cxm/IN': Unsupported RR(255): discarding
Not sure what this message is saying. Can you enlighten me? Thanks, Chris.Originally Posted by Chris
Hi all: I am seeing many errors in /var/log/messages. Here are a few
Aug 12 20:45:05 GR13 [NCPL]: client 10.1.2.15#53: updating zone 'vrapc.cxm/IN': Unsupported RR(255): discarding
Aug 12 20:45:05 GR13 [NCPL]: client 10.2.2.11#53: updating zone 'vrapc.cxm/IN': Unsupported RR(255): discarding
Aug 12 20:45:05 GR13 [NCPL]: client 10.2.2.12#53: updating zone 'vrapc.cxm/IN': Unsupported RR(255): discarding
Not sure what this message is saying. Can you enlighten me? Thanks, Chris.
Was this a migration from NetWare? And do you have DDNS configured? If so, refer to TID 7003923 as found here: Dynamic DNS (DDNS) Fails To Work After Migrating From NetWare to OES Linux -
hey guys!
In my home I have this setup:
Internet ----- Time Capsule ----- macbook
|__________windows pc
So I want to access via DNS name my windows pc via port 8090 (browse) but i can't find ddns configurations in my time capsule, I've seen something about back-to-my-mac/icloud/fdqn settings.. .is it possible know my icloud dns name ?
can you guys help me ?
thank youTo follow along with the screen shots, you will need v5.6 of the AirPort Utility. You can download it directly from Apple here.
-
Hi I am Ricardo Sosa from Guadalajara Mexico an a beginner in Voip I have a SPA9000 and a PAP2NA but I don't know if both works together, I want to call from internet with PAP2NA to SPA9000 I have a Dlink router with DDNS configured, and i can redirect the voip request to a local ip trought virtual server . I am not interested in internet telephony service by sip only want to conect a remote location with PAP2NA with SPA9000 in my home and trasmit dtmf tones if it is possible please let mo know how can it be. Thanks a lot and sorry by my english
Hi Ricardo,
I'm Antonio from Mexico, DF.
Can you implement your Idea and make quiality calls through the Internet without Internet Telephony Company service?.
Calls from PAP2NA to another PAP2NA using the SPA9000 as a remote PBX are posible?.
Please share with me your expirience.
(Mod Note: Email address removed.Use PM to get details from poster above you.)
Message Edited by OnnagokorO on 12-02-2008 10:48 PM -
I have a WRT160N
In the DDNS configuration there is only a space to put one domain name. I have multiple domains hosted off the same web server. Is there a way to add other domains? i.e. comma deliminated or using semi colons, etc
Thanks,
MikeA work around that works for the most part is to enter a host name in the DDNS section, save it, then replace it with another name and save it. As long as you do not get another dynamic IP....it works.
I guess I will use this work around until I rebuild my Linux router.
Regards
(Mod note: Edited for forum compliance.) -
Hello,
My vehicle has been broken into and I need a camera that can have night vision.
I currently own a WAG54G wireless ADSL router and I want to buy a WVC200 wireless camera. However, if the camera is placed in an entirely dark area apart from ambient light from the moon can it see? If it can could someone please post up a capture from the camera in night vision mode? I assume it comes up black and white?
And also the picture captures seem very small is this correct? Could someone please post some pictures of the biggest picture you can take?
And with the video capture can I set the camera to record video footage if it senses any movement?
I am also confused about the subscription you get with the box, if I don't renew the subscription can the camera still send videos to my computer and take photos?
Thanks a lot any information is appreciated.I currently own a WAG54G wireless ADSL router and I want to buy a WVC200 wireless camera. However, if the camera is placed in an entirely dark area apart from ambient light from the moon can it see? If it can could someone please post up a capture from the camera in night vision mode? I assume it comes up black and white?
Apparently the WVC can "see" infrared. So if you get some IR "leds" you should be able illuminate the area around our car without the bad guys seeing anything!
And also the picture captures seem very small is this correct? Could someone please post some pictures of the biggest picture you can take?
And with the video capture can I set the camera to record video footage if it senses any movement?
The motion detection creates a video which can be 640x480 which is quite nice sized. Usually a 5-second video (the longest one you can take) uses up about 1MB of filespace once sent to your email server as an attachment.
I am also confused about the subscription you get with the box, if I don't renew the subscription can the camera still send videos to my computer and take photos?
I haven't yet figured out why there is such a thing as Sololink. Anyway I have been using DynDNS (an option which shows in the DDNS configuration page) and it seems to work fine. Perhaps somebody can tell us what, if anything, the paid subscription to Sololink gives us which a free account at DynDNS does not... -
Hi,
I have CISCO 2900 series router which i use it in our ISP setup. The router has more than 250 static NAT configured on and a about 70 routes. The problem is, every after a while a random NAT disappers from the router. In show run one NAT goes missing. If i added the NAT i get a message that the NAT already exist. So i have to remove the NAT and then add it again for it to appear again but nowadays i just clear the NAT translation (clear IP NAT translation *) and it apppears.
Any ideas on what could be the problem here?
Thanks,
AbbasThanks for the suggestion Elton.
Unfortunately, I believe the LAN ports on this router are layer 2 only, thus they will not take `ip nat` configuration:
Router1(config-if)#ip nat enable
^
% Invalid input detected at '^' marker.
Router1(config-if)#ip ?
Interface IP configuration subcommands:
address Set the IP address of an interface
admission Apply Network Admission Control
auth-proxy Apply authentication proxy
ddns Configure dynamic DNS
device IP device tracking
dhcp Configure DHCP parameters for this interface
igmp IGMP interface commands
rsvp RSVP Interface Commands
vrf VPN Routing/Forwarding parameters on the interface
Here's the result of `show IP NAT translations` as requested:
Router1#show ip nat translations | include ---
tcp 188.222.181.173:25 192.168.1.2:25 --- ---
tcp 188.222.181.173:80 192.168.1.2:80 --- ---
tcp 188.222.181.173:143 192.168.1.2:143 --- ---
tcp 188.222.181.173:443 192.168.1.2:443 --- ---
tcp 188.222.181.173:587 192.168.1.2:587 --- ---
tcp 188.222.181.173:993 192.168.1.2:993 --- ---
tcp 188.222.181.173:1723 192.168.1.2:1723 --- ---
Router1#
As the rules are setup as NVI type rules, they should not be showing up in the command above, instead they should show up in return to the following command:
Router1#show ip nat nvi translations
Router1#
Any ideas why this would happen? -
I am trying to configure two WRV200 from 2 different loca...
I am trying to configure two WRV200 from 2 different location and ADSL
accounts. One location has PPPoE and the other has PPPoA. Both of it are
having a Speedtouch 356 6V modem. The router which using PPPoE and having a DDNS from TZO.com has no problem with the Quick VPN but the router which using a PPPoA connection could not able to connect even the quick VPN.
There is an option to ridirect the Public IP of Speedtouch to other network device and I manage to configure it and now my router who is having a PPPoA connection has a Public IP. But still the same problem VPN still not working.
Is there any chance that I could make this router work with the PPPoA connection. I will really appreciate if somebody could help me with this problem.Sorry for making you confuse. Here is the VPN log details of the 2 routers.
Router 1:
000 "TunnelA": srcip=unset; dstip=unset; srcup=ipsec _updown; dstup=ipsec _updown;
000 "TunnelA": ike_life: 28800s; ipsec_life: 3600s; rekey_margin: 5s; rekey_fuzz: 100%; keyingtries: 5
000 "TunnelA": policy: PSK+ENCRYPT+TUNNEL+PFS+UP+AGGRESSIVE; prio: 24,24; interface: eth0; 000 "TunnelA": dpd: action:hold; delay:30; timeout:120;
000 "TunnelA": newest ISAKMP SA: #0; newest IPsec SA: #0;
000 "TunnelA": IKE algorithms wanted: 5_000-1-2, flags=strict
000 "TunnelA": IKE algorithms found: 5_192-1_096-2,
000 "TunnelA": ESP algorithms wanted: 3_000-1, flags=strict
000 "TunnelA": ESP algorithms loaded: 3_000-1, flags=strict
000 #12: "TunnelA":500 STATE_AGGR_I1 (sent AI1, expecting AR1); EVENT_RETRANSMIT in 9s; nodpd
000 #12: pending Phase 2 for "TunnelA" replacing #0
Router 2:
000 "TunnelA": srcip=unset; dstip=unset; srcup=ipsec _updown; dstup=ipsec _updown;
000 "TunnelA": ike_life: 28800s; ipsec_life: 3600s; rekey_margin: 540s; rekey_fuzz: 100%; keyingtries: 3
000 "TunnelA": policy: PSK+ENCRYPT+TUNNEL+UP+AGGRESSIVE; prio: 24,24; interface: ppp0;
000 "TunnelA": dpd: action:restart; delay:30; timeout:120;
000 "TunnelA": newest ISAKMP SA: #0; newest IPsec SA: #0;
000 "TunnelA": IKE algorithms wanted: 5_000-1-2, flags=strict
000 "TunnelA": IKE algorithms found: 5_192-1_096-2,
000 "TunnelA": ESP algorithms wanted: 3_000-1, flags=strict
000 "TunnelA": ESP algorithms loaded: 3_000-1, flags=strict
000 #3: "TunnelA":500 STATE_AGGR_I1 (sent AI1, expecting AR1); EVENT_RETRANSMIT in 8s; nodpd
000 #3: pending Phase 2 for "TunnelA" replacing #0
Hope this could help you. -
SSL VPN and Dynamic DNS - ddns on IOS
Hello,
I'm trying to configure a SSL VPN tunnel via SDM on a 877 Router. The router gets the public IP address dynamically from the ISP, so I have configured the DDNS to access remotely to the router. I would like to know if it's possible to configure the SSL VPN to support the dynamic IP via SDM o CLI.
Regards
GerardSeems like i have fixed the problem using:
webvpn gateway gateway_1
ip interface Dialer0 port 443
ssl trustpoint local
inservice
However when the router is rebooted, it results in this error:
Invalid ip address First configure an IP address for the gateway
Any idea how to delay the webvpn commands at startup until dialer0 gets a dynamic IP ? -
How can i configure a dynamic dns at a time machine
Hi All,
I have a time machine at home, with Airport Utility version 6.1.
I'm currently trying to configure a dynamic dns at the airport itself but I don't have any luck in finding the functionality to do so. Couple of questions:
1) Do I really have to install the previous versions 5.6 Airport Utility to configure DDNS?
2) I assume if I can't use the previous versions of Airport Utility then I would need to use a Dynamic Update Client. My No-IP Dynamic Update Client doesn't seem to be running on MAC OS X Mountain Lion. Is there any other developers that provides a domain for free and the DUC is actually working on OS X Mountain Lion? (E.g. I heard that DysDNS doesn't provide an entirely free service anymore)I think you mean Time Capsule not time machine.. TC is the hardware .. TM is the software backup program in the computer and has nought to do with DDNS.
There is no DDNS client in the TC.. never has been. Apple must have some private system for icloud to work.. but no access is allowed to it by users. As with all things apple it is designed to ensure you are able to use icloud or nothing.
I am not on ML or even Lion.. good old SL is fine to me.. and far better networking.
I presume some of the dyndns providers will offer a client for ML now..
All of the free services are trying to sell you something.. and constantly harras you.. no free lunch in this world.
The easiest method and to escape the upgrade cycle.. just get another router.. almost every router in the world provides several dyndns clients built in. The router is where this should be done. so the computer can stay off. Just bridge the TC and port forward to it. Simple and cheap.
Maybe you are looking for
-
How do I print a copy of my purchus history
how do I print a copy of my purchus history
-
Asset Depreciation Planned values
Hi Everyone, There is a requirement for us to pull planned as well as posted depreciation values for assets. The input for the program would essentially be Fiscal Year, selected list of asset class & cost centers. We are using the FM 'AM_SHOW_POST
-
Equivalent of Report Business Service - DownloadReport with 8.1/BIP
Hi, We are currently upgrading from Siebel 7.5.3 to Siebel 8.1.1.1, and with it are moving from Actuate to BI Publisher. In 7.5.3 I have workflows that use two methods belonging to the Report Business Service - ExecuteReport and DownloadReport. They
-
Does anyone have a simple script that allows for deletion of a folder. Scenario would be a temporary folder stored in specific location like C: drive. I am able to already delete files inside folder with a simple for statement looping and removing.
-
My macbook was fine when suddenly it turned off and now its not charging !it wont also turn on ! PLEASE HELP ! I don't want to lose any data . And my battery is not removable