Dead mini netbook 5101 or 5102, has date of 09 under keyboard, bottom serial and p/n rubbed off

dead mini netbook 5101 or 5102, has date of 11/09 under keyboard, bottom serial and p/n rubbed off, Tried all tricks to get it to boot, Seems ive had this about a year and its already dead? convenient that the hp serial and p/n rubbed off so I cant even get a warranty check. anyone willing to help. any of the numbers on this able to get me at least a warranty check or some actuall support from hp?

Similar Messages

Hi, i have inserted a dvd in the drive, which has data in it but its showing blank and asking toburn

Hi, i have inserted a dvd in the drive, which has data in it but its showing blank and asking to burn. Along with that its also showing the capacity of the dvd. Its ready to write the disk but not exploring the data on the disk. Please help..

See if this fixit tool can repair it
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us

When i turn on my Ipad air In the cornors of the Black Screen It has white stuff near the top bottom left and Right When it's all it turned on it's fine But when I go to a black Background It does the Same is this normal?

When i turn on my Ipad air In the corners of the Black Screen It has white stuff near the top bottom left and Right When it's all it turned on it's fine But when I go to a black Background It does the Same is this normal
It
I
O

when I turn on my ipad and the black screen comes on I have a slight white light running along the bottom meaning the whole screen is not black. Is ths normal.
better details Sorry
N

Hi have tried to update my iphone now it has locked out with the apple sign on and won't switch off

hi have tried to update my iphone now it has locked out with the apple sign on and won't switch off - any ideas?

See here - http://support.apple.com/kb/TS3694#error1603

I was downloading add-on themes and apparently signed up for background program. it has taken over my computer and I want it off now.

I was adding themes from Firefox and signed up for the "background" program. It has put a slide show on my computer and I want it off NOW. How do I remove it because I don't even know how to get to it? It showed a wooden floor to start with and now it showing horrible pictures that I never picked out.

Did you install a persona?
You can uninstall your current Persona and revert to the Default theme (Tools > Add-ons > Appearance/Themes).
See:
* https://support.mozilla.com/kb/Using+themes+with+Firefox
* http://kb.mozillazine.org/Themes (Lightweight theme)
*http://kb.mozillazine.org/Uninstalling_add-ons
*http://kb.mozillazine.org/Uninstalling_toolbars

I have an iPad mini that somehow got locked. The wrong passcode was entered several times and it became disabled. No one has helped so far hoping for someone to see this and help

Seems simple right? Hook up to a computer and restore and bypass disable screen? NOPE. Everytime I tried to connect it to iTunes it gives me a lovely message that says something to the effect of " cannot sync to itunes because passcode needs to be entered on iPad" but the iPad mini says it is disabled so I am getting the total run around from this devil spawned tech.
I tried to also restore it in recovery mode like someone suggested but it still said the same thing. The person said if I followed instructions it would not do that. Well, it did. Here is exactly what I did:
Itunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes". and the iPad mini has the itunes logo with the USB cord and an arrow on it on the screen. I clciked ok on the computer to shut that message off.
On iTunes it says "Ipad recovery mode. Your software is up to date. Click check for updatr to see if new software is available." The check fo update button is grayed out and the Restore iPad button is available to click. I click on "restore iPad" and a pop up says "Are you sure you want to restore the ipad to its factory settings? All of your media and other data will be erased, and the newest version of the ipad software installed. Itunes will verify the restore with Apple. After this prcess is complete, you will have the option to restore your contact, calendars, text messages, and other settings."
I clicked on "restore and update" and it shows a box with software update 7.0.4 and I click on next. I accept the user agreement and it starts to download the ipad software update.
I wait for the update to install and as I am waiting a box pops up that says "itunes could not connect to the ipad because it is locked with a passcde. You must enter your passcode on the ipad before it can be used with itunes" and it gives me the option to click more information, try again, and cancel.
So what do I do now?

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
            iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.
If you cannot manage any of the above then:
Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
   1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
       other end of the cable connected to your computer's USB port.
   2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
       until the red slider appears, then slide the slider. Wait for the device to turn off.
              * If you cannot turn off the device using the slider, press and hold the
                Sleep/Wake and Home buttons at the same time. When the device turns off,
                release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
       device. The device should turn on. Note: If you see the battery charge warning,
       let the device charge for at least ten minutes to ensure that the battery has some
       charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
       When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

I have just updated my ipad mini with the new ios software and it has caused may ipads onboard keyboard to run very slowly does anyone no how to fix this issue

I have just updated my ipad mini with the new ios software and it has caused may ipads onboard keyboard to run very slowly does anyone no how to fix this issue

*Typing lag iOS 7*
Settings>General>Reset>Reset all settings. This should improve the typing responsiveness
*Note:* Settings, preferences, network settings, etc will be reset. *NO data or media will be lost*
and/or
Settings>iCloud>Documents and Data (turn it OFF)

Time phase Min/max replenishment models for future dates

Hi,
We are working on a safety stock requirement of Maximum/Minimum replenishment model in APO.
It seems to work great except it cannot be time phased. Our business wants different safety stock strategies at different times of the year.
Please suggest if there is a way that we could “time phase” min/max replenishment models for future dates?
Thanks in advance for your help!
regards
Yogendra

Many thanks for this.
I can see entirely why it's designed as such, but I just find it slightly frustrating that there's no way to break the link between the order and the shipment out to the depot. Just to clarify, we're not requiring the orders to change - they will still be made and will come in - but just that the orders themselves don't specifically need to be the stock that is used for the replenishment.
So -
1. Min Max identifies depot needs replenishing.
2. Central distribution does not have (enough) stock to replenish.
3. Order is made to replenish central distributions stock.
4. We ship whatever we've got, when we've got it, to depot to replenish.
It's the bit where Min-Max is trying to replensih a specific depot rather than our central distribution centre that's my problem.
I suspect that, as you say, that specific issue is not directly fixable without getting our IT contractors to do a customisation.
I'm going to look into your Supply Date Offset suggestion now, though I'm not sure how this affects the shipping after the orders are placed. The orders themselves are approved manually after we've checked our stock position (i.e. what's in with the recycling team), but we recycle & refurb probably 60% of our maint stock so there'll always be kit turning up after the order has been made because of the long lead times.
Thanks again.

Function to see if a user has data dba role

How would I create a function to establish is a user has data dba access?

Mark,
Your script does not display all system privileges granted to a user. Here is an example.
SQL> CREATE USER TESTUSER IDENTIFIED BY TESTUSER;
User created.
SQL> GRANT CREATE SESSION,CREATE TABLE TO TESTUSER;
Grant succeeded.
SQL> select u2.name granted_role
2 from (
3 select *
4 from sys.sysauth$
5 connect by prior privilege# = grantee#
6 start with grantee# = ( select user_id
7 from sys.dba_users
8 where username = upper('&user_name')
9 )
10 or grantee# = 1
11 ) sa
12 ,sys.user$ u2
13 where u2.user# = sa.privilege#
14 union all
15 select 'PUBLIC' from sys.dual
16 order by 1
17 ;
Enter value for user_name: TESTUSER
old   8: where username = upper('&user_name')
new   8: where username = upper('TESTUSER')
GRANTED_ROLE
PUBLIC
SQL> SELECT * FROM DBA_SYS_PRIVS
2 WHERE GRANTEE = 'TESTUSER';
GRANTEE                        PRIVILEGE                                ADM
TESTUSER                       CREATE TABLE                             NO
TESTUSER                       CREATE SESSION                           NO
SQL> DISCONNECT
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.3.0 - 64bit Production
With the Partitioning option
JServer Release 9.2.0.3.0 - Production
SQL> I have also noticed the following.
SQL> set define off
SQL> select u2.name granted_role
2 from (
3 select *
4 from sys.sysauth$
5 connect by prior privilege# = grantee#
6 start with grantee# = ( select user_id
7 from sys.dba_users
8 where username = upper('&user_name')
9 )
10 or grantee# = 1
11 ) sa
12 ,sys.user$ u2
13 where u2.user# = sa.privilege#
14 union all
15 select 'PUBLIC' from sys.dual
16 order by 1
17 ;
GRANTED_ROLE
PUBLIC
If some one sets 'define off', we will get the wrong result.
SQL> set define on
SQL> r
1 select u2.name granted_role
2 from (
3 select *
4 from sys.sysauth$
5 connect by prior privilege# = grantee#
6 start with grantee# = ( select user_id
7 from sys.dba_users
8 where username = upper('&user_name')
9 )
10 or grantee# = 1
11 ) sa
12 ,sys.user$ u2
13 where u2.user# = sa.privilege#
14 union all
15 select 'PUBLIC' from sys.dual
16 order by 1
17*
Enter value for user_name: SCOTT
old   8: where username = upper('&user_name')
new   8: where username = upper('SCOTT')
GRANTED_ROLE
DBA
DELETE_CATALOG_ROLE
EXECUTE_CATALOG_ROLE
EXECUTE_CATALOG_ROLE
EXECUTE_CATALOG_ROLE
EXP_FULL_DATABASE
GATHER_SYSTEM_STATISTICS
HS_ADMIN_ROLE
HS_ADMIN_ROLE
HS_ADMIN_ROLE
HS_ADMIN_ROLE
HS_ADMIN_ROLE
HS_ADMIN_ROLE
HS_ADMIN_ROLE
IMP_FULL_DATABASE
JAVA_ADMIN
JAVA_DEPLOY
PUBLIC
RESOURCE
SELECT_CATALOG_ROLE
SELECT_CATALOG_ROLE
SELECT_CATALOG_ROLE
SELECT_CATALOG_ROLE
XDBADMIN
24 rows selected.
It produces multiple rows with the same values.

How to create a .mdf SQL Server database from a Data-Tier Application file that has data?

This is a noob question, though I do use SQL Server databases all the time with Entity Framework when I code in C# using Visual Studio 2013. The development environment is found below at [A]. I am trying to make a clone of a SQL Server 2008 R2
database (.mdf) that exists online. I can read, connect and work with this database in Visual Studio 2013, but I wish to make a local copy of the database, as an .MDF file. Somewhere in my notes I have a way of creating a local copy from
an online database when using Visual Studio but I forgot how (it seems, reviewing my notes, that it deals with ADO.NET which is deprecated in Visual Studio 2013 these days, or so it seems). So I'm looking for another way. What I did was create
(or export) a "Data-Tier Application File" from the online SQL Server database, with data, and it seems to have worked in that this Data-Tier Application file exists on my hard drive and seems to have data in it ("SQL Server Replication Snapshot"
is the format it seems). It contains skeleton code to create a database, but when I tried to execute it with SQL Server 2014 Management Studio, I got a bunch of errors.
So my question is:
1) Can I somehow create a .MDF SQL Server Database from an Data-Tier Application file that has data? What tool do I use? I saw this link, http://social.technet.microsoft.com/wiki/contents/articles/2639.how-to-use-data-tier-application-import-and-export-with-a-windows-azure-sql-database.aspx
and it relates to Azure, but is there a tool for C#Visual Studio 2013, standalone?
2) If there's an easy way to create a .mdf SQL Server Database file from an online file, within SQL Server Management Studio? I don't think so, since it would require Administrator permissions on the online server, which I don't have. I have permission
to read, update, delete the online database file, but strangely not to download it (the service I use has a tool for backup, but not for download).
3) same question as 2), but for Visual Studio 2013? I don't think so, since I notice none of the templates even mentions ADO.NET anymore, but instead they go with Entity Framework. Using EF I can of course do anything I want with the online database
(CRUD), but it remains online. Maybe there's a switch to make a local copy? I guess I could write a short program to suck all the data out of the online database and put it into a new, duplicate database having the same tables, that I create on
my localhost, but my question here is if there's an easier way than this, maybe a tool or command I can run from inside Visual Studio?
Any advice on any of the above questions is appreciated.
Thank you,
Paul
[A] Microsoft Visual Studio Professional 2013
Version 12.0.21005.1 REL
Microsoft .NET Framework
Version 4.5.51641
Microsoft Web Developer Tools 2013   2.0.40926.0
SQL Server Data Tools   12.0.30919.1
Microsoft SQL Server Data Tools
Windows Azure Mobile Services Tools   1.0
Windows Azure Mobile Services Tools

Thanks but these links are too general to help.
"2. what do you mean by online file?" - I mean the SQL Server database file is on a remote web server that I rent from, but I am not the administrator of. I can access my database using SQL Server Authentication, but nothing more.
Paul
What do you mean by too general? It explains on how you can use data tier application to create and deploy databases
May be this will help you to understand better
http://www.databasejournal.com/features/mssql/article.php/3911041/Creating-Data-Tier-Applications--in-SQL-Server-2008-R2.htm
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Acknowlegment for PO Item has date variance

Hi gurus,
While doing the Inbound Delivery the following error:
" Acknowledgement for PO Item has DATE VARIENCE"
Can some body throw light on it ?
Thanks & Regards
Srikanth

hi,
if you try do delivery for the PO item before the date that is mentioned in the PO. Please check the In PO,Item details, under the tab Confirmations, the date entered for the inbound delivery. so you can change the date in PO to the required date and do the inbound delivery.
regards
sadhu kishore

I am moving from PC to Mac. My PC has two internal drives and I have a 3Tb external. What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

I am moving from PC to Mac. My PC has two internal drives and I have a 3Tb external. What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

Paragon even has non-destriuctive conversion utility if you do want to change drive.
Hard to imagine using 3TB that isn't NTFS. Mac uses GPT for default partition type as well as HFS+
www.paragon-software.com
Some general Apple Help www.apple.com/support/
Also,
Mac OS X Help
http://www.apple.com/support/macbasics/
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725
Apple Mac App Store
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store
How to Buy Mac OS X Mountain Lion/Lion
http://www.apple.com/osx/how-to-upgrade/
TimeMachine 101
https://support.apple.com/kb/HT1427
http://www.apple.com/support/timemachine
Mac OS X Community
https://discussions.apple.com/community/mac_os

Can't install itunes on windows 7 machine. I keep getting A message stating that I don't meet min. requirements, but the machine has more than enough. What do I need to do to correct this?

Can't install itunes on windows 7 machine. I keep getting A message stating that I don't meet min. requirements, but the machine has more than enough. What do I need to do to correct this?

Are you trying to install the 32-bit version on a 64-bit machine, or vice versa?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

My Hard Disk setting has been changed into no access for everyone and i can't open my mac. please tell me how can i login as an admin to change the setting cause i have a lot of date in my hard drive.

My Hard Disk setting has been changed into no access for everyone and i can't open my mac. please tell me how can i login as an admin to change the setting cause i have a lot of date in my hard drive.

Read and follow Apple Support Communities contributor Niel's User Tip: kmosx: I accidentally set a disk's permissions to No Access

Finally got round to buying an iPhone 4, really excellent to start with. The sharing of music from my Mac Mini was excellent. ios6 update has ruined all that! The artist view miss's out most of my music and the sharing sometimes doesn't work at all!

Finally got round to buying an iPhone 4, really excellent to start with. The sharing of music from my Mac Mini was excellent. ios6 update has ruined all that! The artist view miss's out most of my music and the sharing sometimes doesn't work at all!
How do I get this feature working again? I am reluctant to move to iTunes 10.7 because I don't trust Apple at the moment.

My suggestion:
1) Always using MAC AIR with the power plug in.
2)Don' let the power level of battory fall under 30% percentage.
3)If the MAC can't be recharged now, just let it be with power plugged, WAIT...

Dead mini netbook 5101 or 5102, has date of 09 under keyboard, bottom serial and p/n rubbed off

Similar Messages

Maybe you are looking for