Dead Zone then not coming back....

is it happening to anyone else that when u enter a dead zone (no signal) your iphone doesnt get the service back on when u leave the dead zone?? everytime this happens i have to turn on the airplane mode and back off to "restart" the service.
any help?

Yup, try setting it up as a "new phone" in iTunes, but if what you're saying is true and it never comes back into service then that will probably be your only option, if it does come into service again, just live with it. But you seemed to have found a quick way about it by putting it in and out of Airplane Mode.
I'm replying because I get the same problem where it goes into one of the many deadzones in my area and then does take about a minute or 2 when I know I'm out of the deadzone

Similar Messages

I have tried to update IOS 5.1 in my Iphone 4 and unfortunately I got an error message and phone is stucked at restore point. It is not coming back to normal mode and is not able to detect my phone in iTunes. Please help me how to recover my Iphone IOS

I have tried to update IOS 5.1 in my Iphone 4 and unfortunately I got an error message and phone is stucked at restore point. It is not coming back to normal mode and is not able to detect my phone in iTunes. Please help me how to recover my Iphone IOS, unfortunately I don't have my iphone backup too.

we have a same problem

HT2357 I accidently deleted all of my updates and they're not coming back. Is there any quick way to get these updates active again?

I accidentally deleted all of my updates and they're not coming back. I haven't been able to make any updates since 2006. I have a log of my past updates but I cannot seem to get them active again. Is there any easy way to get these updates active again?
This was a while ago back in 2006 but from what I can remember I actually deleted/permanently removed these updates from my list of updates. I tried keeping all the updates except for two that I did not need and somehow deleted all of the updates I wanted to keep. I've tried reseting my ignored updates but that does not bring back the updates. If i delete the two that I originally attempted to remove - it only brings those two back. I hope there is still some way to get these updates back. I appreciate any help that anyone is able to give me.
Thanks!
Plum<3

10.4.11 is the latest version of 10.4.
The security updates for 10.4 are listed here:
http://support.apple.com/kb/HT5165
If you are interested in updating to 10.5, see this tip.

My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!

My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!

Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

MQ message is not coming back in MQ in case of error in Global Transaction

Hi,
```````````````````````````````````````````````````````
I am using Oracle JDeveloper 11.1.1.5.0 and SOA server 11.1.1.5
```````````````````````````````````````````````````````
Use Case :_
I have created a Sync BPEl process. In which I am dequeing the messages from MQ using "Get Messages from MQ" Operation available in MQ series Adapter. Also checked the Synchronous check Box, So that we can have the Ondemand dequeing of Messages.
Three Properties have been added In Composite.xml file to make the MQ adapter service participate in Single global transaction :
<property name="*bpel.config.transaction*">required</property>
<property name="*bpel.config.oneWayDeliveryPolicy*">sync</property>
<property name="*partnerLink.SyncReadMQ.transaction*" type="xs:string" many="false">participate</property>
(this last property is added in the partner link of the MQ series adpater, And hence refleacted in the composite.xml file)
Also provide the MQ Adapter configuration XATransaction='true' in Admin console, to support the Global transaction by following the Oracle Doc (http://docs.oracle.com/cd/E17904_01/integration.1111/e10231.pdf)
Issue :_
In case of any system error, The Message is not going back into the MQ and it is lost. My concern is that if I have made the MQ adpater service to participate in the global transaction of the Main BPEL process then upon any fault occur the Adapter service should be rolled back. but it is not happening.
I want the message back in the Queue in case of any error.
Would anyone please help me in this issue.+
`````````````````````````````````````````````````````````````````````````````````````````
One more thing to notice is that MQ Adapter is a transactional adapter it should participate in the rtransaction.
`````````````````````````````````````````````````````````````````````````````````````````
Thanks
Sunil
Edited by: 856749 on May 17, 2012 10:57 AM
Edited by: 856749 on May 18, 2012 7:34 PM

Hi All,
Still this thread is unanswered, Is there any genius who has done Transaction handling on Adpaters (MQ or JMS). I have look into may threads on forums, but no appropriate information is given about this issue. If this thread is been answered then it will be very helpfull for othes dealing with transaction in MQ.
Thanks
Sunil

Bounced emails are not coming back to me

I send out many emails and to keep my email lists accurate I need to know which emails bounce back to me. As of the last 2 weeks I am not receiving any bounced back emails. I have sent several test bogus emails and they do not come back as well. What is the solution!

How do you figure this is a Thunderbird problem? Thunderbird hands the email off to your providers SMTP server and then it is done. It has no control over what the servers that the message pass through do with it.

WiFi turning off when Ethernet connected, and not coming back on

Since about last Tuesday (possibly when I updated to Safari 7.0.6), whenever I connect my MacBook Air (2011) to ethernet, my WiFi turns off. When I disconnect the ethernet, the WiFi does not turn back on, which makes this an annoying problem. If I try to manually turn it on while Ethernet is still connected, it does the scanning animation a few times, and then turns back off. Without the ethernet, once WiFi is turned back on, it works just fine. I'm using both the Apple USB to Ethernet adapter and a StarTech Thunderbolt hub with Gigabit ethernet, and this happens with both. Everything is up to date, and the only change that coincided with this new behavior is Safari, but I don't remember if I updated it before of after the problem appeared, and I may not have noticed the problem for a few days as I don't often use my mac away from a wired connection.
Is this a known problem? Any known solution? When I search for it, all I find are people looking for ways to make the WiFi automatically toggle opposite the Ethernet, no one complaining that it's happening on its own.

Why are you turning cellular data off when you get home? If you have wifi at home, it will connect to the phone. Then, once you leave home and get out of range of the wifi, cellular data should connect automatically, you wouldn't need to turn it back on. Turning wifi off is really not necessary unless you are using it as a battery saving feature. I leave my wifi turned on all the time, as well as cellular data, and my battery lasts for quite a long time.

Screen dimming after 20 seconds - not coming back to life

This morning, when I started my laptop, it was working fine. THen after about 20 seconds the screen went really dim - dimmer than you can make it go normally, and too dim to use, but you can still see somethign.
I put it too sleep, then brought it back again, and it came to life - but then did the same thing.
Can anybody tell me what is wrong?
Thanks

You also may want to check TVT Power Manager; there are a few options in there that dim the display, some of which really dim the display quite a bit.
Was this or another post on the forum helpful? Click the star on the left side of the screen to give kudos! Did someone solve a problem you encountered? Mark it as "solution provided" to help others with the same problem.

Screen not coming back on after phone call??!!

this is a brand new 3g phone. And I have had a 1st Gen iPhone from the original release date.
However, when I make a call and put the phone to my ear, the screen goes black as it should. But upon the conclusion of the call the screen does not come back on until I have locked it and unlocked it again!!
Has this happened to anyone else?

Same thing here!! I was calling my wife and it happened 3 times in a row in a matter of minutes. I rebooted the phone and it went away. Hasn't crept up on me again, yet (knock on wood).
I don't know whether it makes a difference and whether they are technically the same, but I upgraded the firmware that was released 07/10/2008 that is from Apple's Servers from version 5A345 to 5A347 just to see if this fixed any last minute glitches.
I hope this problem never surfaces again. We all paid a lot for these and spent a lot of time waiting for activation.

I accidently delete my pictures but i try i cloude still not coming back i took thode pictures with my iphone what i have to do i took those pictures before update to the new one

HI i accidently delte my pictures and now i try to returning them back i cloude can not returning them i tooke those pictures before the new update
what i have to do to return them i took thise pictures with my iphone too but i do not know why is not comming back
please help me

Restore from iCloud backup.

Survey answers not coming back in CRM 7.0

We are about to implement CRM 7.0. I created a new survey via the web UI. I then launch a web page which brings back the survey results based on the Business Partner that logs in.
I have debugged the program and it appears that the the problem is that the CRM_MKTCA_SURVEY_MKT_PBO interface appears to be looking for a marketing attribute with a value of mktattrp_XXXXX but the web ui survey creation generated the attribute mktattr_XXXXX without the letter P. So the program to display the answers doesn't find a match because the attribute with the P doesn't match the attribute without the P.
Has anyone else experienced this issue?
Thanks
Angie.

Closing this out ... this question was not answered.

Configuring an Outgoing Batch in an agreement - Instance ID not coming back

create a batch in an agreement, click on start, then do several refresh, I do not have an instance ID sent back as mentioned in the documentation.
I tried this on 2 different BTS 2010 and 2013, they are both 64 bit, one is win 2008 the 2nd is on a win 2012 R2
Thanks for your help

I have enabled it but just right now, I noticed that it is in a disabled state. The error in the event log is :
The receive location "BatchControlMessageRecvLoc" with URL "SQL://SQL2K12/BizTalkMgmtDb/" is shutting down. Details:"The receive adapter on this receive location is not supported on 64-bit host instances. Please make sure that the receive adapter is
associated with a 32-bit only handler. ".
I have not played with BTS EDI since version 2009, does this mean that all EDI functionality need to be run on a 32 bit host?
I dont intend to use InstanceID anywhere, I am following lab 19 from MSDN BTS Training kit and it indicates that once we start the batch, 1 minute later we should refresh and InstanceID is displayed which is not hapopening on my box.
The reason is that I am followed the lab 19 when testing the sample file on both machines I get the message suspended with the following error :
The published message could not be routed because no subscribers were found. This error occurs if the subscribing orchestration or send port has not been enlisted, or if some of the message properties necessary for subscription evaluation have not been
promoted. Please use the Biztalk Administration console to troubleshoot this failure.

Intel iMac shutting off suddenly, not coming back for hours

Hello,
Last night my iMac suddenly shut off; I tried for about twenty minutes to turn it back on (I tried the power button, unplugging and replugging, changing outlets...), then gave up. This morning I tried it and it worked just fine, but after several hours it shut off again. That was about three hours ago and it hasn't come back yet. Curiously it shut off right before iSight was going to snap a picture in Photo Booth, and I just can't remember if that's when it happened last night too...
Any help?

Sounds like an overheating problem. You could try to reset the SMC and see if that helps, if not it probably needs to go to the shop.
Here is a link to how to reset the SMC on a new Mac
http://docs.info.apple.com/article.html?artnum=303446

SW3 not coming back on

My Wife was in a tv talkshow audience and got one of these (plus some other stuff) as a prize. She gave it to me and I believe it worked for about three weeks before it started acting glitchy. I had it conncted to my computer to recharge and when I took it off I saw it wouldn't come back on. Nothing. Zip. Zilch. Nada. When it's plugged into the computer it makes the connection noises then right after it makes them, makes the disconnection sounds. This repeats every 30-45 seconds, it gets faster the more the watch heats up, and I mean THE WATCH HEATS UP HOT!!!!! Still even after holding the power button ON it doesn't reboot or anything. Does anyone know how to fix this? No it hasn't been in any water and NO I didn't drop it or bang it around, and I only know that it still exists by plugging it into the computer so I can hear the CONNECT/DISCONNECT sounds. HELP this is driving me crazy
Solved!
Go to Solution.

it was the only way. thanks, i kinda figured so i chatted with someone while waiting for a response here. they said the same and gave me the number for repairs... it was the same number on this site... its the only number they give youard. Best bet is to just call the number in the contact us button and talk to someone to get your stuff fixed. I'll call them later. Knew my equipment needed manufacturers servicing...so glad I didn't open this thing up myself now. anybody willing to open up your sw3 yourself, take my advice. even though y'all don't know me DON'T DO THAT ISHT send it IN TO BE SERVICED!!! go fix your universal remote that rattles when you shake it, ...not this little fragile thing. CALL THEM AND SEND IT IN. Best of luck to all others awaiting solutions... Thank You Thommo! Peace to everyone.
Hardedef D. Imhotep

CRM Survey Responses not coming back into the CRM system - WHY????

Hey guys,
I am trying to implement the campaign automation. My problem now is, that I am not getting the survey responses back into the CRM System so the next campaign element cannot start.
We do not use a BW; and in terms of the .xml for the URL generation I used bsp and not for example mailto. When I tested the URL it worked fine. I as well checked the workflows, they also seem fine. When I created the mailform and inserted the hyperlink I choosed the option no tracking as I said before, we do not use a BW.
Can you tell me if I missed any configuration steps? I also started the internal CatServer, as mentionend in many notes.
I highly appreciate your help.
Best regards,
Janine

Hi,
we are using campaign automation with Surveys and we are able to see responses. Maybe try these steps:
- generate a survey like in Create, run and analyze an E-Mail Campaign with a Survey (Part 1)
- generate the url for your survey and insert it inside a mail form,activating the option "tracking via target site" (since you need to track responses and your survey is on the CRM domain)
-create a simple campaign that sends a mail using your mail form and pass some BP in the target group, then make them answer the survey: under "contact statistics" you should see the number of outbound mails and the number of inbound contacts with the number of BPs that answered to your survey
Once you are sure that this scenario is working, you can set conditions in campaign automation on the type of response received in the survey, etc... (like in http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20283126-36ca-2d10-6983-92ed18d36644?QuickLink=index&overridelayout=true )
Hope this helps,
regards,
laura

Dead Zone then not coming back....

Similar Messages

Maybe you are looking for